Gateway ProfileTM 5 Operation & User’s Manual

www.gateway.com 6 Remove the drive. 7 Make sure that the jumpers on the new drive are set the same as the drive you are replacing. 8 Insert the new drive into the drive cage and secure it with the four screws removed earlier. 9 Connect the drive cable and power cable to the drive. 10 Slide the drive cage into the computer until it clicks into place. 11 Close the case by following the instructions in “Closing the computer case” on page 218. ...

www.gateway.com Setting up your system ■Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. ■Do not use this product near water or a heat source such as a radiator. ■Set up the system on a stable work surface. ■The product should be operated only from the type of power source indicated on the rating label. ■If your computer has a voltage selector switch, make sure that the switch is in the proper position fo ...

www.gateway.com Caring for your computer To extend the life of your system: ■ Be careful not to bump or drop your computer, and do not put any objects on top of it. The case, although strong, is not made to support extra weight. ■ When transporting your computer, we recommend that you put it in the original packaging materials. ■ Keep diskettes and your computer away from magnetic fields. Magnetic fields can erase data on both diskettes and hard drives. ■ Avoid subjecting your computer to extreme temperature changes. The case can become brittle ...

Gateway, Inc. All Rights Reserved 14303 Gateway Place Poway, CA 92064 USA All Rights Reserved This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form, without prior consent in writing from Gateway. The information in this manual has been carefully checked and is believed to be accurate. However, changes are made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or change products described in this publ ...

www.gateway.com Warning In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Warning Every country has ...

www.gateway.com To create a video DVD: 1 Insert a blank, writable DVD-R, DVD-RW, DVD+R, or DVD+RW disc into your recordable DVD drive. You cannot use a DVD-RAM disc to create a video DVD. 2 If a CD Drive dialog box opens, click Take no action, then click OK. 3 Use Pinnacle Expression to create video DVDs. After you connect your digital camcorder to your computer, creating a video DVD typically consists of three basic steps: capture the video, edit the video, and record the video to a recordable DVD. Tips & Tricks See Do More With Gateway for more information abo ...