Samsung MM-C330D Operation & User’s Manual

Text of the manual

PERSONAL MICRO COMPONENT

SYSTEM user manual MM-C330D imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register MM-C330D-Latin-xsp-ENG-1.indd 2-3 MM-C330D-Latin-xsp-ENG-1.indd 2-3 2010-3-4 2010-3-4

RISK OF ELECTRIC SHOCK.

DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER (or BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • This apparatus shall always be connected to a AC outlet with a protective grounding connection. • To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. CAUTION • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • The Mains plug is used as a disconnect device and shall stay readily operable at any time. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time. Protect the player from moisture(i.e. vases) , and excess heat(e. g.fireplace) or equipment creating strong magnetic or electric fields (i. e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc have been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using. During thunderstorms, disconnect AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit. The battery used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash. Phones MM-C330D-Latin-xsp-ENG-1.indd 4-5 MM-C330D-Latin-xsp-ENG-1.indd 4-5 2010-3-4 2010-3-4

Safety Warnings .................................................................................................................................................................1

Precautions.........................................................................................................................................................................2 Features .............................................................................................................................................................................3 Description..........................................................................................................................................................................5 CONNECTIONS Connecting the Speakers ...................................................................................................................................................9 Connecting to a TV .............................................................................................................................................................10 P.SCAN(Progressive Scan) Function .................................................................................................................................12 Connecting External Components ......................................................................................................................................13 Connecting the FM Antennas .............................................................................................................................................14 Setting the Clock ................................................................................................................................................................15 OPERATION Disc Playback .....................................................................................................................................................................16 MP3/WMA-CD Playback ....................................................................................................................................................17 JPEG File Playback ............................................................................................................................................................18 DivX Playback ....................................................................................................................................................................19 Playing Media Files using the USB feature ........................................................................................................................21 Displaying Disc Information ................................................................................................................................................23 Fast/Slow Playback ............................................................................................................................................................24 Skipping Scenes/Songs......................................................................................................................................................25 Angle Function....................................................................................................................................................................26 Repeat Playback ................................................................................................................................................................27 A-B Repeat Playback ........................................................................................................................................................28 Zoom Function....................................................................................................................................................................29 Selecting Audio/Subtitle Language.....................................................................................................................................30 Moving Directly to a Scene/Song .......................................................................................................................................31 Using Disc Menu ................................................................................................................................................................32 Using the Title Menu...........................................................................................................................................................33 SETUP Setting the Language .........................................................................................................................................................34 Setting TV Screen type.......................................................................................................................................................35 Setting Parental Controls (Rating Level) ............................................................................................................................37 Setting the Password..........................................................................................................................................................38 Setting the DRC (Dynamic Range Compression) ..............................................................................................................39 AV SYNC Setup .................................................................................................................................................................40 RADIO OPERATION Listening to Radio ...............................................................................................................................................................41 Presetting Stations .............................................................................................................................................................42 MISCELLANEOUS CD RIPPING Function ........................................................................................................................................................43 Timer Function....................................................................................................................................................................44 Canceling the Timer ...........................................................................................................................................................45 Power Sound / Power Bass / Treble Level / Bass Level Function .....................................................................................46 DSP/EQ Function ..............................................................................................................................................................47 Sleep Timer Function / Mute Function................................................................................................................................48 DEMO Function / DIMMER Function..................................................................................................................................49 Connecting Headphones/Microphone ................................................................................................................................50 Cautions on Handling and Storing Discs ............................................................................................................................51 Before Calling for Service ...................................................................................................................................................52 Notes on Discs ...................................................................................................................................................................54 Notes on Terminology ........................................................................................................................................................55 Specifications .....................................................................................................................................................................56 Multi-Disc Playback & FM Tuner The MM-C330D combines the convenience of multi-disc playback capability, including DVD, CD, MP3-CD, CD-R, CD-RW, DivX,JPEG and DVD-R/RW, with a sophisticated FM tuner, USB HOST all in a single player. Power Saving Function The MM-C330D automatically shuts itself off after 20 minutes in the stop mode(only for USB, DVD). TV Screen Saver Function The MM-C330D automatically brightens and darkens the brightness of the TV screen after 3 minutes in the stop mode. The MM-C330D automatically switches itself into the power saving mode after 20 minutes in the screen saver mode. DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. V I D E O DVD players and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is given on the rear panel of the player. (Your DVD player will only play DVDs that are labeled with identical region codes.) 1 6 ~ • Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. • This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Copy Protection E Contents MM-C330D-Latin-xsp-ENG-1.indd 6-7 MM-C330D-Latin-xsp-ENG-1.indd 6-7 2010-3-4 2010-3-4

COMPACT DISC COMPARTMENT

3. HEADPHONE JACK 4. MIC 5. USB JACK 6. VOLUME 1 2 3 4 5 6 WHAT’S INCLUDED Check for the supplied accessories below. Video Cable FM Antenna User's Manual Remote Control —Top Panel— —Rear Panel— 1. POWER 2. FUNCTION CHANGE 3. SEARCH FUNCTION BUTTON(DOWN) 4. TUNING MODE OR STOP BUTTON 5. PLAY/PAUSE BUTTON 6. SEARCH FUNCTION BUTTON(UP) 7. OPEN/CLOSE 1 2 3 5 4 6 7 8 1 2 3 4 5 6 1. Component Output Connectors Connect a TV with component video input jacks to these jacks. 2. AUX IN 3. Video Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector. 4. FM Antenna Connector 5. Speaker Connector Terminals 6. Clamp-Wire (Fasten the speaker wires.) • The accessories may look slightly different than those pictured above. Note MM-C330D-Latin-xsp-ENG-1.indd 8-9 MM-C330D-Latin-xsp-ENG-1.indd 8-9 2010-3-4 2010-3-4

The remote control can be used up to approximately 23

feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 45° from the remote control sensor. Range of Operation of the Remote Control —Remote Control— 7 Description Caution Remove the battery cover in the direction of the arrow. 1 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –). 2 Replace the battery cover. 3 Follow these precautions to avoid leaking or cracking cells: • Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–). • Use the correct type of batteries.Batteries that look similar may differ in voltage. • Always replace both batteries at the same time. • Do not expose batteries to heat or flame. Insert Remote Batteries DSP/EQ button VOLUME button MENU button TIMER/CLOCK button POWER button TIMER ON/OFF button CANCEL button PAUSE button Number(0~9) buttons USB button AUX button TUNER button DVD button DEMO/DIMMER button OPEN/CLOSE button REMAIN button ANGLE button TREB/BASS button MIC VOL - button TUNER MEMORY button MIC VOL + button ECHO button SUBTITLE button INFO button Cursor/ENTER button RETURN button REPEAT button TUNING button/Tuning Preset button MUTE button AUDIO button SLEEP button SLOW button ZOOM button POWER SOUND button REPEAT A-B button CD RIPPING button STEP button CD Skip buttons EXIT button Play button SEARCH buttons Stop button MO/ST button 45 45 MM-C330D-Latin-xsp-ENG-1.indd 10-11 MM-C330D-Latin-xsp-ENG-1.indd 10-11 2010-3-4 2010-3-4

Please be sure to turn off the power and unplug the power cord before moving or

installing this unit. Please choose one video connection method. Connecting to a TV Method 1 Using Video Out (Good Quality) Connect Video Out on the player to Video In on your TV. 1 Press the TV/VIDEO button on the remote of TV control to set the TV to "VIDEO". 2 Connecting the Speakers Before moving or installing the product, be sure to turn off the power and disconnect the power cord. • Composite Video: A single video signal that is a composite of the black-and-white information (Y) and the color information (C). Note • Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker. • Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker. • Do not take the speaker near from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display. Directions in Installing Speaker The loudspeaker connector terminals are located on the rear of the system. There are two terminals on the system: left speaker (marked L) right speaker (marked R) To achieve the correct sound quality,insert those speaker connector cables to the speaker connector terminals of the system. Front Speakers • Place these speakers in front of your listening position, facing inwards (about 45°) toward you. • Place the speakers so that their tweeters will be at the same height as your ear. Position of the DVD Player • Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet) For 55" TVs 3.5~4m (11~13feet) R L 8 8 ( supplied) MM-C330D-Latin-xsp-ENG-1.indd 12-13 MM-C330D-Latin-xsp-ENG-1.indd 12-13 2010-3-4 2010-3-4

P.SCAN (Progressive Scan) Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines. You can select "Progressive Scan" or "Interlace Scan" for you TV. Please go to ­­

Connecting the FM Antennas

14 Connect AUX IN on the player to Audio Out on the external analog component. • Be sure to match connector colors. 1 Example: Analog signal components such as a VCR, Camcorder, and TV. Connecting an External Analog Component Connecting External Components Press AUX to select AUX. • ‘ AUX’ appears in the display. 2 1 Connect the FM antenna supplied to the FM COAXIAL Jack. 2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. • This unit does not receive AM broadcasts. Note 8 Audio Cable If the external analog component has only one Audio Out, connect either left or right. (not supplied) 8 FM Antenna (supplied) MM-C330D-Latin-xsp-ENG-1.indd 16-17 MM-C330D-Latin-xsp-ENG-1.indd 16-17 2010-3-4 2010-3-4

Setting the Clock

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. • "CLOCK" is displayed. 2 Press TIMER/CLOCK twice. 1 Switch the system on by pressing POWER button. • "TIMER" appears in the display. • The current time is now set. 5 When the correct time is displayed, press ENTER. • Increase the minutes : • Decrease the minutes : 4 When the correct hour is displayed, press ENTER. The minutes flash. • Increase the hours : • Decrease the hours : 3 Press ENTER. The hour flashes. • You can display the time, even when you are using another function, by pressing TIMER/CLOCK once. • You can also use on the panel front instead of buttons in step 3,4. Note 2 Load a disc. • Place a disc gently into the tray with the disc’s label facing up. 1 Press OPEN/CLOSE button to open the disc tray. • To resume playback, press PLAY( ) button again. To temporarily pause playback, press PAUSE button during playback. • If pressed once, the stop position will be stored in memory. If PLAY ( ) button is pressed, playback resumes from the stop position. (This function works only with DVDs.) • If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning. To stop playback, press STOP button during playback. Checking the Remaining Time Each time the REMAIN button is pressed , the time is displayed as below: Press the REMAIN button. • For checking the remaining time of a title or chapter being played. DVD CD MP3 TITLE REMAIN TIME CHAPTER REMAIN TIME ELAPSED TIME Press the REMAIN button. If you press the REMAIN button,  the remaining time is displayed. To cancel this function, press the  REMAIN button again. 3 Press OPEN/CLOSE button to close the disc tray. Note • For mixed discs, the play order is as below:MP3/WMA ­ DIVX ­ JPEG. • Depending on the content of the disc, the initial screen may appear different. • Depending on the recording mode, some MP3-CDs cannot be played. • For CD discs, you can press the numeric buttons to select the track, when you press the numeric buttons after 3 seconds, the playback starts automatically. • Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. • DTS Audio is not supported. • DVD Audio Disc is not supported. MM-C330D-Latin-xsp-ENG-1.indd 18-19 MM-C330D-Latin-xsp-ENG-1.indd 18-19 2010-3-4 2010-3-4

• Depending on the recording mode, some MP3/WMA-CDs may not be played.

• Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc. Note 2 Use to select the album, and then press the ENTER button. • The MP3/WMA menu screen will appear and playback will start. • The appearance of the menu depends on the MP3/WMA disc. • WMA-DRM files cannot be played. • Use to select the track. 1 Load the MP3/WMA disc. 4 Press the STOP button to stop playback. • To select another album and track, repeat Steps 2 and 3 above. 3 To change the album, use to select another album in Stop mode, and then press the ENTER button. JPEG File Playback Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this DVD player. JPEG 17 18 Rotate/Flip Function Zoom/Auto play Function button: Flip Vertically button: Flip Vertically button: Rotate 90° Counterclockwise button: Rotate 90° Clockwise Press Cursor , , , buttons during playback. Press INFO button during playback, TV displays as below: Original Image 1. Use , to select icon, and then press ENTER button, each time you press the button, your selection will rotate as clockwise. 2. Use , to select icon, and then press ENTER button, each time you press the button, your selection will change as below: x2 ­ x4 ­ x2 ­ Off. 3. Use , to select icon, and then press ENTER button, TV displays as below: Press ENTER button to select the time space for playing the pictures. 4. Press STOP button to cancel this function. MM-C330D-Latin-xsp-ENG-1.indd 20-21 MM-C330D-Latin-xsp-ENG-1.indd 20-21 2010-3-4 2010-3-4

During playback, press the button.

• Go to the next file whenever you press button, if there are over 2 files in the disk. • Go to the previous file whenever you press button, if there are over 2 files in the disk. Press button. • Each time the button is pressed during playback, the playback speed changes as follows: 20 Subtitle Display Press the SUBTITLE button. • Each time you press the button, your selection will changed as below: • If the disc has only one subtitle file, it will be played automatically. • Up to 8 subtitle languages are supported. • To resume normal playback, press PLAY ( ) button. SUBTITLE KOR SUBTITLE Off • When playing the DivX disk, you can play the file with extension of AVI only. • Among the available DivX audio formats, DTS Audio is not supported. • When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file. • MPEG 1 Layer 1 (MP1) is not supported. Note DivX Feature Table DivX Supported Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format. MPEGs containing DivX can be divided into Video and Audio. • Video compatibility : All versions of DivX later than 3.11 (including the latest 5.1) are supported. In addition, XviD is supported. • Audio compatibility : MP3s encoded at bit rates from 8kbps to 320kbps, AC3s from 32kbps to 640kbps, and WMAs from 48kbps to 384kbps are supported. • In addition, for subtitles, this unit will support Text format (SMI). SPEC VIDEO Compatibility DivX3.11 Up to the latest VERSION AUDIO Compatibility MP3 CBR : 8kbps~320kbps AC3 CBR : 32kbps~640kbps WMA CBR1:Stereo case:48kbps~384kbps CBR2:Mono case:64kbps~192kbps Press the AUDIO button. • If there are multiple audio tracks on a disc, you can toggle between them. • Each time you press the button, your selection will toggle between AUDIO(OFF, 1/1, 1/2 ...). Audio Display 5 Minutes Skip function During playback, press the , button. • Go to the screen 5 minutes after whenever you press button. • Go to the screen 5 minutes earlier whenever you press button. • For MPG format files, 5 minute skip function is not supported. Note MM-C330D-Latin-xsp-ENG-1.indd 22-23 MM-C330D-Latin-xsp-ENG-1.indd 22-23 2010-3-4 2010-3-4

• Video files (DivX, MPEG, etc.) are supported.

• To prevent the loss of data saved in the USB device, please turn the unit off or switch it to another mode before disconnecting the USB cable. • The play order is as follow: MP3/WMA ­ DIVX ­ JPEG. Note 2 Press the FUNC. button on the main set or the USB button on the remote control to select the USB mode. • “ USB” appears on the display screen and then disappear. • USB SORTING screen appears on the TV screen and the saved file is played. 1 Connect the USB cable. You can connect and play files from external USB storage devices such as MP3 players, USB flash memory, etc. using the player's USB function. To stop playback, press the STOP ( ) button. 21 Playing Media Files using the USB feature 22 Fast playback To play back the disc at a faster speed, press or button during playback. • Each time you press either button, the playback speed will change as follows:  x 2 ­  x 4 ­  x 8 or  x 2 ­  x 4 ­  x 8 • To resume normal playback, press PLAY ( ) button. USB Host Specifi cation USB Host Specifi cation • Supports USB 1.1 or USB 2.0 compliant devices. • Supports devices connected using the USB A type cable. • Supports UMS (USB Mass Storage Device) V1.0 compliant devices. • Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16, FAT32) fi le system. Non-compliance • Does not support a device that requires installing a separate driver on the PC (Windows). • Does not support connection to a USB hub. • A USB device that is connected using the USB extension cable may not be recognized. • A USB device requiring a separate power source needs to be connected to the player with the separate power connection. Operational Limitations • If the connected device has multiple drives (or partitions) installed, only one drive (or partition) can be connected. • A device supporting USB 1.1 alone may cause a difference in the picture quality, depending on the device. Compliant Devices USB Storage Device 1. MP3 Player 2. Digital Camera 3. Removable HDD 4. Removable HDDs equipped with less than 160 Gbytes are supported. Removable HDDs • equipped with 160Gbytes or more may not be recognized, depending on the device. If the connected device does not work due to insuffi cient power supply, you can use a separate • power cable to supply power so that it can work properly. The connector of the USB cable may differ, depending on the manufacturer of the USB device. USB card Reader: One slot USB card reader and Multi slot USB card reader. 5. Depending on the manufacturer. the USB card reader may not be supported. • If you install multiple memory devices into a multi card reader, you may experience problems. • Compliant File Formats Format File name File extension Bit rate Version Pixel Sampling Frequency Still Picture JPG JPG .JPEG – – 640x480 – Music MP3 .MP3 8~320kbps – – 44.1kHz WMA .WMA Stereo:48~384kbps V8 – 44.1kHz Mono:64~192kbps Movie DivX .AVI 4Mbps DivX3.11~ DivX5.1, XviD 720x480 44.1KHz~48KHz CBI (Control/Bulk/Interrupt) is not supported. • Digital Cameras that use PTP protocol or require additional program installation when connected to a • PC are not supported. A device using NTFS fi le system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) fi le • system is supported.) Does not operate with Janus enabled MTP (Media Transfer Protocol) devices. • • MPEG 1 Layer 1 (MP1) is not supported. Skip Forward/Back During playback, press the or , button. • When there is more than a file, when you press the , button, the next file is selected. • When there is more than a file, when you press the , button, the previous file is selected. MM-C330D-Latin-xsp-ENG-1.indd 24-25 MM-C330D-Latin-xsp-ENG-1.indd 24-25 2010-3-4 2010-3-4

• Each time you press either button during playback,

the playback speed changes as follows: 24 Displaying Disc Information You can view playback information on the disc on the TV screen. Press INFO button. • Press Cursor , buttons select the desired item. DVD Display disappears • What is a Title? A movie contained in a DVD disc. • What is a Chapter? Each title on a DVD disc is divided into several smaller sections called "chapters". • appears on the TV screen! If this symbol appears on the TV screen while buttons are being operated, that operation is not possible with the disc currently being played. • What is a Track (File)? A section of video or a music file recorded on a CD, or MP3-CD. • Depending on the disc, the disc information display may appear different. Note • To resume normal playback, press PLAY ( ) button. Press SLOW button. • Each time the button is pressed during playback, the playback speed changes as follows: Slow Playback DVD DivX • During fast playback of a CD or MP3-CD, sound is not heard. • No sound is heard during slow playback and step motion playback. Note • To resume normal playback, press PLAY ( ) button. • In Pause mode or Step mode or Slow mode, you can use the button to select as below: MM-C330D-Latin-xsp-ENG-1.indd 26-27 MM-C330D-Latin-xsp-ENG-1.indd 26-27 2010-3-4 2010-3-4

This function allows you to view the same scene in different angles.

Skipping Scenes/Songs DVD MP3 DVD DVD MP3 Briefly press . • Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will be played. • But, you cannot skip chapters consecutively. • The picture moves forward one frame each time the button is pressed during playback. Playing Frame by Frame Press STEP button. Skip Skip Step 26 1/3 1/3 2/3 3/3 DVD 1 Press ANGLE button. • Each time the button is pressed, the angle changes as follows: • The Angle function works only with discs on which multiple angles have been recorded. Note 2 Press Cursor , buttons or numeric buttons to select the desired angle. DivX CD Track01 Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track02 Track01 Track02 Track03 Track04 Track05 Track06 Track07 Track03 Track01 Track02 Track03 Track04 Track05 Track06 Track07 CD MM-C330D-Latin-xsp-ENG-1.indd 28-29 MM-C330D-Latin-xsp-ENG-1.indd 28-29 2010-3-4 2010-3-4

Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).

28 A¥B Repeat Playback DVD CD MP3 DIVX • The A-B Repeat function does not operate with JPEG disc. • The time space of point A and B should be more than 5 seconds. 'RPT A-' is displayed. 'RPT OFF-' is displayed. 'RPT A-B' is displayed. 2 Press the REPEAT A-B button at the point where you want repeat play to stop (B). 1 Press the REPEAT A-B button at the point where you want repeat play to start (A). 3 To return to nomal play, press the REPEAT A-B button again. Press REPEAT button. • Each time the button is pressed during playback, the repeat playback mode changes as follow: • Press the REPEAT button or cursor , button to select one mode then press ENTER button. • Select : Cancel Repeat playback. • Select : Repeat playback one Chapter. • Select : Repeat playback one Title. • Select : Repeat playback A-B. DVD DVD CD MP3 DIVX CD MP3 DIVX Repeat Playback Options Track Off Folder Track Folder Disc Shuffle Off Track Disc Shuffle Off Track Repeatedly plays the selected track. Folder Repeatedly plays all tracks in the selected folder. Disc Repeatedly plays the entire disc. Shuffle Plays tracks in random order. (Each track can be played one time.) Off Cancels Repeat Playback. MM-C330D-Latin-xsp-ENG-1.indd 30-31 MM-C330D-Latin-xsp-ENG-1.indd 30-31 2010-3-4 2010-3-4

This function allows you to enlarge a particular area of the displayed image.

30 Selecting Audio/Subtitle Language • Each time the button is pressed, the zoom level changes as follow: 2 x ¬ 4 x ¬ OFF. 2 x ¬ 4 x ¬ 2 x ¬ OFF. Zoom (Screen Enlarge) Function DVD DVD 2 Press Cursor , , , buttons to move to the area you want to enlarge. 1 Press ZOOM button. 3 Press ENTER button. DivX DivX JPEG JPEG • Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPAIN,FRENCH, etc.) is selected each time the button is pressed. 2 2 Press Cursor , buttons to select the Audio and then press ENTER button. Press Cursor , buttons to select the Subtitle and then press ENTER button. 1 Press INFO button. Audio Language Selection Function DVD Subtitle Language Selection Function DVD Note 1 Press INFO button. 3 3 Press Cursor , or numeric buttons to select the desired Audio language and then press ENTER button. Press Cursor , or numeric buttons to select the desired Subtitle language and then press ENTER button. • You can use the AUDIO or SUBTITLE button on the remote control to select an audio or subtitle language. • Depending on the disc, the Subtitle and Audio Language functions may not work. • When you use AUDIO button to select "DTS", sound is not heard, and the TV displays as below: Note CHI DOLBY DIGITAL 5.1 CH AUDIO MM-C330D-Latin-xsp-ENG-1.indd 32-33 MM-C330D-Latin-xsp-ENG-1.indd 32-33 2010-3-4 2010-3-4

Moving Directly to a Scene /Song

DVD 2 Press Cursor , buttons to select the Title/Chapter. 1 Press INFO button. Moving to a Title/Chapter 4 Press Cursor , buttons to select the Time. Moving to a Specific Time 5 Press the numeric buttons to select the desired time and then press ENTER button. Moving to a Specific Time 3 Press Cursor , or numeric buttons to select the desired part and then press ENTER button. Moving to a Title/Chapter • You can press on the remote control to move directly to the desired title, chapter. • Depending on the disc, you may not be able to move to the selected title or time. Note 32 Using Disc Menu You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. DVD 2 1 In stop mode, press MENU button. Press Cursor , buttons to move to ‘DISC MENU’ and then press ENTER button . 4 3 Press Cursor , buttons to select the desired item and then press ENTER button. Press Cursor , , buttons to select the desired item and then press ENTER button. Disc Menu Disc Menu Press MENU button to exit the setup screen. Press RETURN button to return to the previous level. Press EXIT button to exit the setup screen. MM-C330D-Latin-xsp-ENG-1.indd 34-35 MM-C330D-Latin-xsp-ENG-1.indd 34-35 2010-3-4 2010-3-4

Using the Title Menu

For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, this function may either not work at all or may work differently. 2 Press Cursor , button to move to ‘Title Menu’ and then press ENTER button. DVD 1 In stop mode, press MENU button. Press MENU button to exit the setup screen. 33 Press RETURN button to return to the previous level. Press EXIT button to exit the setup screen. * If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language. Selecting the Player menu Language Selecting the Disc Menu Language (recorded on the disc) Setting the Language OSD language is set to English by default. 2 1 In stop mode, press MENU button. Press Cursor , button to move to ‘Setup’ and then press ENTER button. 3 • Once the setup is complete, if the language was set to English, OSD will be displayed in English. Selecting the Audio Language (recorded on the disc) Selecting the Subtitle Language (recorded on the disc) Selecting the Subtitle Language (recorded on the disc) 4 Press Cursor , button to select the desired item and then press ENTER button. Press Cursor , button to select the desired language and then press ENTER button. Press RETURN button to return to the previous level. Press MENU or EXIT button to exit the setup screen. 34 Disc Menu Disc Menu 4 3 Press Cursor , buttons to select the desired item and then press ENTER button. Press Cursor , , buttons to select the desired item and then press ENTER button. MM-C330D-Latin-xsp-ENG-1.indd 36-37 MM-C330D-Latin-xsp-ENG-1.indd 36-37 2010-3-4 2010-3-4

tting TV Screen type

2 1 • You can select '4:3 Letter Box', '4:3 Pan&Scan' or '16:9 Wide' mode for your TV. • You can select 'I-SCAN' or 'P-SCAN'. (see the page 12 about P-SCAN or I-SCAN mode.) • You can select 'On' or 'Off'. On: you can see the screen messages. Off: you can't see the screen messages. 4 6 3 5 In stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. Press Cursor , button to move to ‘Display Setup’ and then press ENTER button. Press Cursor , button to move to ‘Screen Messages’ and then press ENTER button. Press Cursor , button to 'Tv Aspect' and then press ENTER button. Press Cursor , button to 'Video Output' and then press ENTER button. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen size, you should adjust the aspect ratio to fit your TV or monitor. 4 For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference. Select "16:9" if you have a wide screen TV. : Select this to view a 16:9 picture in the full-screen mode on your wide screen TV. • You can enjoy the wide screen aspect. : Select this to play a 16:9 picture in the letter box mode on a conventional TV. • Black bars will appear at the top and bottom of the screen. : Select this to play a 16:9 picture in the pan & scan mode on a conventional TV. • You can see the central portion of the screen only (with the sides of the 16:9 picture cut off). 4:3LB (4:3 Letter box) 16:9 Wide 4:3PS (4:3 Pan&Scan) • If a DVD is in the 4:3 ratio, you cannot view it in wide screen. • Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting. Note Adjusting the TV Aspect Ratio (Screen Size) SETUP Press EXIT button to exit the setup screen. Disc Menu 2010-3-4 8:42:31 2010-3-4 8:42:31

ing Parental Controls (Rating Level)

to restrict playback of adult or violent DVDs you do not want children to view. • This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 2 e, press on. Press Cursor button to move to ‘Setup’ and then press ENTER button. 4 • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen. vel 6, you Level 7 or e closer the adult material. 3 5 Press Cursor button to move to ‘Parental Setup’ and then press ENTER button. , button ting Level' ENTER Press Cursor , button to select the 'Change Password' and then press ENTER button. Enter the password and then press ENTER button. Note 2 1 In stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. • Enter the old password, a new password, and confirm new password. • The setting is complete. 3 5 Press Cursor button to move to ‘Parental Setup’ and then press ENTER button. Enter the password and then press ENTER button. Setting the Password You can set the password for the Parental (rating level) setting. SETUP Press CANCEL button to cancel the error numeric when you inputting password. Press EXIT button to exit the setup screen. Disc Menu 2010-3-4 8:42:42 2010-3-4 8:42:42

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen. 40 SETUP AV SYNC Setup 2 1 3 Press Cursor , buttons to move to ‘Audio’ and then press ENTER button. 4 • You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Press Cursor , buttons to select the Delay Time of AV-SYNC and then press the ENTER button. Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTER button. In stop mode, press MENU button. ting the DRC (Dynamic Range Compression) use this function to enjoy Dolby Digital sound when watching movies at me at night. 1 2 In stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 4 Press Cursor , to adjust the ‘DRC’. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Press EXIT button to exit the setup screen. Press Cursor , button to select the 'DRC' and then press ENTER button. • You can set the DRC between 0 and 8. Set it to the optimal status. Disc Menu Disc Menu 2010-3-4 8:42:50 2010-3-4 8:42:50

stening to Radio

listen to the chosen band (FM broadcast stations) by using either the c or manual tuning operation. Presetting Stations 2 Tune in to the desired station. NER 2 Select a broadcast station. Press the STOP ( ) button to select PRESET and then press button to select the preset station. Automatic Tuning 1 FUNC. select the Press the STOP ( ) button to select "AUTO" and then press button to automatically search the band. Automatic Tuning 2 Press STOP ( ) to select MANUAL and then briefly press to tune in to a lower or higher frequency. Manual Tuning • Each time the button is pressed, the sound switches between "STEREO" and "MONO". • In a poor reception area, select MONO for a clear, interference-free broadcast. Press MO/ST button to listen in Mono/Stereo. This applies only when listening to an FM station.) • Refer to Step 2 on page 41 to automatically or manually tune in to a station. 2 1 3 Example: Presetting FM 89.1 in the memory Press TUNING or to select "89.10". Press the TUNER button and select the FM band. • If you can’t press “TUNER MEMORY” in 5 seconds, the preset disappears and “FM” displays. 5 4 • You can select between 1 and 15. Press the TUNER MEMORY button. Press the TUNER MEMORY button. 6 To preset another station, repeat steps 2 to 5. ntrol Unit You can store up to: kHz kHz kHz MO 15 FM stations RADIO OPERATION kHz MO kHz Press the STOP ( ) button to select PRESET and then press TUNING or button to select the preset station. Automatic Tuning 1 Press the STOP ( ) button to select "AUTO" and then press TUNING or button to automatically search the band. Automatic Tuning 2 Press STOP ( ) to select MANUAL and then briefly press TUNING or to tune in to a lower or higher frequency. Manual Tuning Press TUNING or to select preset number. 2010-3-4 8:42:55 2010-3-4 8:42:55

D RIPPING Function

n rip a compact disc as a MP3 file on the USB eature enables you to ripping with the start of the disc or track of your choice. Timer Function • The timer enables you to switch the system on or off at specific times. • If you no longer want the system to be switched on or off automatically, you must cancel the timer. • Before setting the timer, check that the current time is correct. • For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. Example: You wish to wake up to music every morning. • ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time. • The source to be selected is displayed. 2 1 3 Switch the system on by pressing POWER. Press TIMER/ CLOCK until TIMER is displayed. Press the ENTER button. • is displayed to the top right of the time, indicating that the timer has been set. • The system will switch on and off automatically at the required times. 8 7 9 Press or button to select the source to be played when the system switches on. Press ENTER to confirm the timer. Press POWER to set the system to standby mode. 5 4 a. Set the hour by pressing or button. b. Press ENTER . • The minutes flash. c. Set the minutes by pressing or button. d. Press ENTER. • OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch- off time already set; you can now set the timer switch-off time. a. Set the hour by pressing or button. b. Press ENTER. • The minutes flash. c. Set the minutes by pressing or button. d. Press ENTER. • VOL 10 is displayed, where 10 corresponds to the volume already set. Set the timer switch-off time. 6 Press or button to adjust the volume level and press ENTER. Set the timer switch-on time. Note • If the timer switch on and off times are identical, the word ERROR is displayed. • If there is no disc or usb, when you select the “DVD, USB, it will automatically change to “TUNER”. • TUNER (radio) : a Press ENTER. b Select a preset station by pressing or . • DVD/CD (compact disc) : Load on or more compact disc. • USB :Insert a USB. 2 3 Connect the USB. e system essing Load a compact disc(Digital Audio). D G button ote control ng ripping. Press the OPEN/CLOSE button to open the CD door. Insert a CD and press the OPEN/CLOSE button to close the CD door. Use the CD selection ( ) buttons to select the desired song. 5 To stop ripping, press STOP( )button.and then automatically create and save as the MP3 file. After CD-Ripping,a directory named “RIPPING FOLDER” will be created in your device.The file name is same with the disc. MISCELLANEOUS and AC Cord during CD-Ripping. This may cause ant to stop CD-Ripping during CD-Ripping, you must after the CD Stopped, then you can remove the USB device when CD Ripping, the main unit will be ot delete the ripped file, In this case, please connect ackup the USB data on the PC first and then s not enough, it will be displayed “RIPPING ping. format the USB can be CD Ripping, but not NTFS. of this product does not support all USB devices. peed search function or in the Pause or Stop mode, k. ot deal impact.If is shocked while CD Ripping, CD e. B devices, CD Ripping time is long. n't use CD RIPPING function. etes or Stops, the CD will reload. ate, press this button, layed and CD ate, press and hold this G” is displayed and CD disconnect USB 2010-3-4 8:42:59 2010-3-4 8:42:59

anceling the Timer

Note • You can cancel the timer while the power is on or while the player is in standby. having set the timer, it will start automatically as shown by the TIMER indication on the ay. If you no longer wish to use the timer, you must cancel it. • is no longer displayed. To cancel the timer, press TIMER ON/OFF once. • is displayed again. To resume the timer, press TIMER ON/OFF again. MISCELLANEOUS Press the P.SOUND button. Each time the button is pressed, the selection changes as follows: P.SOUND ¬ P.BASS ¬ OFF When CD Ripping,the P.SOUND, P.BASS function can’t work and the P.SOUND, P.BASS automatically covert to “OFF” mode. Treble Level Function Treble Control function stresses high tones providing thudding sound effects. • Press the , button to select from TREB -04 to TREB 04. •You can select the level of high tones you desire. Press TREB/BASS button , TREB 00 is displayed. Bass Level Function BASS function stresses low tones providing thudding sound effects. • Press the , button to select from BASS -04 to BASS 04. •You can select the level of low tones you desire. Press TREB/BASS button , BASS 00 is displayed. Power Sound/Power Bass/ Treble Level/Bass Level Function POWER SOUND/POWER BASS Function Your micro-compact system is equipped with the function of POWER SOUND mode . The function of POWER SOUND mode amplifies bass and improves high key or bass twice as much for you to appreciate powerful real sound. Your micro-compact system has a bass amplification function called SBS (Super Bass Sound). This function makes the sound more powerful and real. 2010-3-4 8:43:02 2010-3-4 8:43:02

To obtain a...

Select... Normal balance (linear) PASS Balance suitable for pop music POP Balance suitable for rock music ROCK Balance suitable for class CLASSIC Balance suitable for jazz JAZZ Balance suitable for s.bass S.BASS When CD Ripping,the DSP/EQ function can’t work and the DSP/EQ automatically covert to “PASS” mode. Press DSP/EQ on the remote control until the required option is selected. Selecting DSP/EQ Your mini-compact system is equipped with a preset equalizer that allows you to choose the most appropriate balance between treble and bass frequencies, according to the type of music you are listening to. 48 MISCELLANEOUS Sleep Timer Function / Mute Function • The remaining time before the DVD player will shut itself off is displayed. • Pressing the button again changes the sleep time from what you have set earlier. To confirm the sleep timer setting, press SLEEP button. • Each time the button is pressed, the selection changes as follows: 90 MIN ¬ 60 MIN ¬ 45 MIN ¬ 30 MIN ¬ 15 MIN ¬ SLEEPOFF. Press SLEEP button. Sleep Timer Function You can set the time that the DVD player will shut itself off. To cancel the sleep timer, press SLEEP button until SLEEPOFF appears on the display. • ‘ MUTE ’ appears in the display. • To switch the sound back on , press MUTE again or press the VOLUME buttons. Mute Function This is useful when answering a doorbell or telephone call. Press MUTE button. 2010-3-4 8:43:05 2010-3-4 8:43:05

• The loudspeakers are no longer used to

output the sound. Connect the headphones to the PHONES jack on the front panel. • Prolonged use of headphones at a high volume may damage your hearing. Note Plug a microphone with a 3.5ø MIC jack into the Mic terminal. • Connect one Microphone. • Press the MIC VOL button to adjust the MIC level. • Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF. You can connect a set of headphones to your micro component system so that you can listen to music or radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or an appropriate adapter. You can also insert microphone to sing along with your favorite Cds. tions available are listed in turn on the display. ns are described in detail in this booklet. on how to use them, refer to the appropriate sections. MO Function view the various functions available on your system. MO Function / DIMMER Function tton is press, the brightness changes as follows: Dim) ­ DIMMER OFF(Bright). MER Function ust the brightness of the display on the main unit so it won't h your movie viewing. MO/DIMMER button. EMO/DIMMER button. to cancel DEMO function. the main unit, DEMO function will be auto start if you want to cancel this DEMO function, press utton again. 2010-3-4 8:43:07 2010-3-4 8:43:07

Do not touch the playback side of the disc. Hold

the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth. • When cleaning, wipe gently from the inside to the outside of the disc. discs and Storing Discs utions on Handling and Storing Discs scratches on the disc may reduce sound and picture quality or cause breaks in ack. Be especially careful not to scratch discs when handling them. • Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on. Note MISCELLANEOUS 52 Before Calling for Service Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. • Check the region number of the DVD. DVD discs purchased from abroad may not be playable. • CD-ROMs and DVD-ROMs cannot be played on this DVD player. • Make sure that the rating level is correct. • Are you using a deformed disc or a disc with scratches on the surface? • Wipe the disc clean. Disc tray does not open. Playback does not start. Playback does not start immediately when the Play/ Pause button is pressed. • No sound is heard during fast playback, slow playback, and step motion playback. • Are the speakers connected properly? Is the speaker setup correctly customized? • Is the disc severely damaged? Sound is not produced. • Was the DVD player suddenly moved from a cold place to a warm one? When condensation forms inside the player, remove the disc and let the player stand for 1 or 2 hours with the power on. (You can use the player again after condensation disappears.) Picture does not appear, sound is not produced, or the disc tray opens 2 to 5 seconds later. Symptom Check/Remedy • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking. • Is the remote control being operated within its operation range of angle and distance? • Are the batteries exhausted? The remote control does not work. 2010-3-4 8:43:09 2010-3-4 8:43:09

Notes on Discs

• Audio language and subtitles will not work for DVDs not containing them. And depending on the disc, they may work differently. e and t work. • Are you using a disc that does not contain menus? ot appear even tion is selected. • While the player is in the No Disc mode, hold the main unit's STOP button for longer than 5 seconds. “INITIAL” appears on the display and all settings will return to the default values. • Press the POWER button. Using the RESET function will erase all stored settings. Do not use this unless necessary. • Turn off the power and hold the STOP button on the main unit for longer than 5 seconds. Using the RESET function will erase all stored settings. Do not use this unless necessary. for rating forgotten. not working. ower goes out or heard.) er is not ally. • Is the antenna connected properly? • If the antenna's input signal is weak, install an external FM antenna in an area with good reception. adio tom Check/Remedy • You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function. nnot be CD-R Discs • Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be played back. • Some CD-RW (Rewritable) media, may not be playable. • Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc. CD-R JPEG Discs • Only files with the "jpg" extensions can be played. • If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. • Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played. • JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). • Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment. • A maximum of 9,999 images can be stored on a single CD. • When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played. • Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all. CD-R MP3 Discs • Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. • MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +). • Use discs recorded with a compression/decompression data rate greater than 128Kbps. • Only files with the ".mp3" and ".MP3" extensions can be played. • Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc can be played only up to the blank segment. • If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played. • For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback. • A maximum of 500 tracks can be played per CD. • A maximum of 300 folders can be played per CD. DVD R/RW, CD-R/RW DivX Discs • Software updates for incompatible formats are not supported. (Example : QPEL, GMC, resolution higher than 720 x 480 pixels, etc.) • Sections with a high frame rate might not be played while playing a DivX file. DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX Ultra Certified device that plays DivX video. This product does not support Secure (DRM) Media files. Disc Recording Format 2010-3-4 8:43:11 2010-3-4 8:43:11

otes on Terminology

Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left , from the right , etc.). With such discs, the Angle button can be used to change the angle of view for specific scenes. These numbers are recorded on DVD discs. A Title is subdivided into many sections, each of which is numbered, and specific parts of the video can be searched quickly using these numbers. A high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG-2) and high-density recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together. An acronym for Pulse Code Modulation - another name for digital audio. This is recorded on a video CD (version 2.0). Selected scenes or information can be chosen from the menu displayed on the TV monitor. Both the DVD player and DVD discs are encoded with a region number. If the region number on the DVD disc does not correspond to the region number of the DVD player, the player cannot play the disc. Translated appearing at the bottom of the screen. A DVD disc can contain up to 32 subtitle languages. These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as Title 1, Title 2, etc. These numbers are assigned to the tracks which are recorded on video and audio CDs. They enable specific tracks to be located quickly. 5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs recorded as a digital signals (with disc marking). With better sound quality, dynamic range, and directionality than traditional Dolby surround technology, you can enjoy dynamic, realistic sound. K BER S ER BER 56 MISCELLANEOUS Specifications RADIO FM Signal/noise ratio 62 dB Usable sensitivity 10 dB Total harmonic distortion 0.4 % COMPACT DISC PLAYER Capacity 1 disc Frequency range 20 Hz - 20 KHz (± 1 dB) Signal/noise ratio 90 dB (at 1 KHz) with filter Distortion 0.1 % (at 1 KHz) Channel separation 75 dB Disc sizes Diameter: 120 or 80 mm. Thickness: 1.2 mm AMPLIFIER Output power Front Speaker(8 Ω) 35W/CHX2 RMS,IEC (total harmonic distortion: 10 %) Channel separation 60 dB Signal/noise ratio 70 dB GENERAL Power consumption 35W Dimensions 230(D) x 154 (H) x 251 (W) mm Weight 2.2 Kg 2010-3-4 8:43:12 2010-3-4 8:43:12

Other Stereo System Manuals