RCA CC800 Operation & User’s Manual

/S E Table of Contents ...................... .l Optional Accessories.. ................ .l First-Time Operation ................. .8 Powering Your Camcorder.. ......16 Recording and Traveling Tips....2 1 Recording Features ................. .24 Specifications .......................... .43 Playback ................................ .44 ) Care and Maintenance ............ .50 1 Trouble Checks ....................... .52 Limited Warranty.. .................. .55 Index l........ 56 .............................

card allows us to contact you if needed. Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you ever need them. The numbers are located on the bottom of your camcorder. Model No: CC800 I Serial No: / Purchase Date: Purchased From: SAFETY PRECAUTIONS j Your video camcorder’s AC adapter/charger will operate on loo-240 j volts AC, 50/60 Hz, and has a polarized plug. Because one blade of the plug is wider than the other, the plug fits in the wall socket only I 1 one way. Do not defeat the safety feature of this plug. If you need an I extension cord, use a polarized extension cord. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EvI’IER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. IF YOU SPILL LIQUID ON THE CAMCORDER OR ADAPTER/CHARGER, DISCONNECT THE AC ADAPTER/CHARGER’S POWER CORD TO PREVENT POSSIBLE FIRE OR SHOCK HAZARD AND CONSULT AUTHORIZED SERVICE PERSONNEL. MOISTURE CAN DAMAGE INTERNAL PARTS. REFER ALL SERVICE TO AUTHORIZED RCA CAMCORDER SERVICENTER PERSONNEL ONLY. i

CAUTION: READ “IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER” ON THE NEXT PAGE BEFORE USING THE AC ADAPTER/CHARGER. CAUTION: MAINTAIN ELECTRICAL SAFETY. POWERLINE-OPERATED EQUIPMENT OR ACCESSORIES CONNECTED TO THIS UNIT SHOULD BEAR THE UL LISTING MARK OR, IF PURCHASED AND USED IN CANADA, THE CSA CERTIFICATION MARK ON THE ACCESSORIES THEMSELVES AND SHOULD NOT HAVE BEEN MODIFIED SO AS TO DEFEAT THE SAFETY FEATURES. THIS WILL HELP AVOID ANY POTENTIAL HAZARD FROM ELECTRIC SHOCK OR FIRE. IF IN DOUBT, CONTACT QUALIFIED SERVICE PERSONNEL. I WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE CAMCORDER OR AC ADAPTER/ CHARGER TO RAIN OR MOISTURE. The symbol of a lightning .A An exclamation point flash within. a triangle is within a triangle is intended to alert the user intended to alert the user to the presence of l to the presence of uninsulated “dangerous voltage”’ within the product’s enclosure and which may be of sufficient magnitude to. constitute a risk of electric shock. important operating and maintenance (service) instructions in the literature accompanying the product. ii

Before using the AC adapter/charger, read all instructions and cautionary markings on (1) AC adapter/charger, (2) battery, and (3) product using battery. Caution: To reduce risk of injury, charge only rechargeable batteries type FB1260, or FB120. Other types of batteries may burst causing personal injury and damage. Do not expose the adapter/charger to moisture of any kind. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. To reduce risk of damage to electric plug and cord, pull out the cord with the plug rather than the cord when disconnecting the adapter/charger from the wall outlet. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that: 1. Pins on the plug of the extension cord are the same number, size, and shape as those of the plug on the adapter/charger. 2. Extension cord is properly wired and in good electrical condition, and 3. Wire size below is met: Minimum Length of Extension AWG Size Cord (Feet) 18 Equal to or less than 100 16 Equal to or less than 150 Do not operate adapter/charger with a damaged cord or plug. Replace it immediately. Do not operate adapter/charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified serviceman. Do not disassemble adapter/charger. Take it to an Authorized RCA Camcorder Se¢er when service or repair is required. Incorrect reassembly may result in a risk of electric shock. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Be sure to save these operating instructions for future reference. CAUTION: FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE USER’S AUTHORITY TO OPERATE IT. CAUTION: THE UNAUTHORIZED RECORDING OF TELEVISION PROGRAMS AND OTHER MATERIALS MAY INFRINGE THE RIGHTS OF OTHERS. . . . 111

devoted to quality standards in the manufacture of your product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. These pages list important information that will help to assure your enjoyment and proper use of a camcorder, adapter/charger, and accessory equipment. Please read them carefully before operating your products. Installation 1. Read and Follow Instructions- All the safety and operating instruc- tions should be read before the product is operated. Follow all operating instructions. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings--Comply with all warnings on the product and in the i operating instructions. 4. Polarization-This product is equipped with a polarized altemating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. To prevent electric shock, do 5 . 6 . 7,. not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension cord, use one with a polarized plug. Power Sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Overloading-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your service technician. Power-Cord Protection-Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. (continued on next page) iv

8. Ventilation--Slots and openings in the products are provided for ventilation to ensure reliable operation of the product and to protect them from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the product manufacturer’s instructions have been followed. 9. Attachments-Do not use attachments unless recommended by the product manufacturer as they may cause hazards. 10. Water and Moisture--Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like. 11. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult as well as serious damage to the product. Use this product only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer. 1lA A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. (continued on next page) V

12. Outdoor Antenna Grounding-If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSVNFPA No. 70 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna- discharge unit, size of grounding conductors, location of antenna- discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example below as per National Electrical Code, ANSIJNFPA 70. Example of Antenna Grounding 13. Power Lines-Au outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer. U s e 14. 15. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or “short-out” parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. (continued on next page) vi

16. Lightning-For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power line surges. Service 17. Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18. Conditions Requiring Service- Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the product. C. If the product has been exposed to rain or water. vii 19. 20. 21. 22. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. E. If the product has been dropped in any way. F. When the product exhibits a distinct change in performance- this indicates a need for service. Replacement Parts-When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the product manufacturer can prevent fire, electric shock, or other hazards. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks recommended by the manufacturer to determine that the product is in safe operating condition. Wall or Ceiling Mounting-The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Optional Accessories.. ...................... l-7 l Accessory Order Form.. ............... .5-7 First-Time Operation ................... .8-15 Powering Your Camcorder.. ...... .16-20 Recording and Traveling Tips ........ .21 Video Cassettes.. .......................... .22-23 Features l Camera Edit ................................... 24 l Quick Review.. .............................. .24 l Tally Light ..................................... 24 l Microphone .................................... 24 l Flying Erase Head.. ....................... .24 l Auto Head Cleaner.. ...................... .24 l Electronic Indexing.. ..................... .24 l Electronic Viewfinder.. ................. .25 l Viewfinder Displays.. ............... .26-27 l Date and Time Displays .......... .28-31 l Titler............................................... 32 l Zooming ........................................ 33 l Focusing Your Camcorder.. ..... .34-35 l Fading In and Out of Scenes.. ....... .36 l White Balance.. ............................. .37 l Time Counter With Memory Stop .38 l Tape Time-Remaining Display......3 9 Using the Cassette Adapter........ .40-41 Attaching the Shoulder Strap ......... .42 Removing the Lens Ring.. ................ .42 Specifications ..................................... 43 Playback l Viewfinder Playback and Playback Features ................................... 44-45 l Viewfinder Playback.. .............. .44 l Tape Positioning.. ..................... .45 l Visual Searching ...................... .45 l Stop-Action Pause.................... .45 l Tracking .................................... 45 l Playback on TV (or VCR) With AUDIO/VIDEO IN Jacks .... ..46-4 7 l Playback on TV Without Audio/Video Inputs ............... .48-49 Care and Maintenance ............... .50-51 Trouble Checks ............................ 52-54 Limited Warranty ............................. 55 Index (Alphabetical) ................... .56-59 We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your compact VI-IS camcorder. The following pages have a selection of accessories to help make your memorable moments look and sound even better. These accessories are designed to make the process of recording and watching your videos more enjoyable. To order accessories, contact your local Dealer. If a dealer is not nearby, all accessories are available through toll-free ordering or by using the order form on page 5.

Batteries These rechargeable nickel-cadmium batteries are designed specifically for long life. The FB1260 powers your camcorder approximately 55 minutes and the FB120 approximately 110 minutes (depending on how much you use zoom and pause). Both can be recharged with the AC adapter/charger that came with your camcorder. CPS91 AC Battery Charger The CPS91 battery charger plugs directly into an AC outlet and charges the FB1260 and FB120 camcorder batteries. Because the CPS91 operates on 100-240 Volts, 50/60 Hz, it can be used virtually anywhere in the world. A plug adapter may be required in some countries. Charging takes approximately eight hours for the I%1260 (l-hour battery) and 13 hours for the FB120 (2-hour battery). DCCOS Car Cord Adapter This car cord adapter enables you to operate your camcorder from your car, truck, or RV by plugging the car cord directly into the vehicle’s cigarette lighter socket. The DCC08 is designed specifically to convert power from a 1Zvolt battery to a 6-volt output. AC036 Monopod This monopod gives a flexible alternative to using a traditional tripod. Its rugged compact design provides excellent stability. It is ideal for all camcorder sixes and photo cameras. It has a quick-release shoe, three-section leg, handstrap, foot step and weighs only 35 ounces. 2

This remote control lets you operate the camcorder from across the room. Uses one 3-volt micro lithium battery. lCVA147C RF Output Adapter This RF output adapter is used with a coaxial RF cable, such as AH065G or AHO66G, to connect your camcorder to a standard TV (one without audio/video inputs) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer such as 193983. If your TV has 300 ohm VHS screw terminals, you will need an optional 75-300 ohm transformer such as AH01 1. AH25 Y-Adapter This Y-adapter allows you to connect your camcorder’s mono audio cable to a stereo TV or VCR. Coaxial RF Cables AHO65G (64) AH066G (lo-ft) These RF cables are used with the RF output adapter to connect your camcorder to a standard TV (one without audio/video input jacks) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer such as 193983. If your TV has 300 ohm VI-IS screw terminals, you will need an optional 75-300 ohm transformer such as AHOll. 193983 Cable Transformer This 300-to-75 ohm transformer is used to connect a standard (300 ohm) antenna twin-lead to a standard round 75-ohm connector. AH011 Cable Transformer This 75-to-300 ohm transformer is used to connect a standard 75-ohm antenna cable (such as AH065G or AHO66G) to the 300-ohm screw terminals on a TV. 3

Custom compact soft case designed especially to provide protection and utility for your compact VHS camcorder and most accessories. Rugged fabric lined with soft non- abrasive material and generous padding. Has three outside pockets with storage for lens filters, adapters, batteries, and tapes, VCClOOO Video Color Control Center The VCClOOO is two accessories in one. The color control center allows you to adjust the color intensity, tint, white balance, and sharpness of tapes being dubbed, This is especially helpful when the original tape was produced in poor lighting conditions or poor color settings. The. second feature, the character generator, lets you create titles that can be recorded on your tapes. This lets you add a professional and/or personal touch to your home videos. Using the Optional AC035 Tripod Mounting the camcorder on a tripod, such as AC035, will keep the camcorder steady and produce excellent video results. This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick- release mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 23-l/2” when not in use and weighs only 3-l/2 lbs. Rubber feet allow for sure footing.

Description Part No. Soft Camcorder Case ACO25A Super Lightweight Tripod AC035 Monppod AC036 Shoulder Stra P ACSO91 75-300 Cable Transformer AH011 price Qty. Total $ 59.95 $ 69.95 $ 39.95 $ 13.95 $ 1.90 Y-Adapter Coaxial RF Cable Coaxial RF Cable AH25 $ 1.95 AH065G $ 6.99 AH066G $ 8.99 AC Adapter/Charger ( CPSO20 1 $159.95 1 AC Batterv Clharger 1 CPS91 1 $ 59.95 1 I Car Cord Adapter Rechargeable Battery (2 Hr.) Rechargeable Batterv (1 Hr.) DCcQ8 $ 74.95 PB120 $ 59.95 I%1260 $ 49.95 .\ I Cassette Adaoter 1 VCA115 I % 49.95 I RF Output Adapter 75 Cable Transformer RemotecontrOl Audio/Video Output Cable lCVA147C $ 52.30 193983 $ 6.95 221125 $ 39.95 221205 $ 19.95 Prices are subject to change without notice. To@ Merchandise ($10 Minimum Order) . . . . . . . . . . . . . . . . . . . . . . $ Sales Tax . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ We are required by law to collect the appropriate sales tax for each individual state, county, and locality to which the merchandise is being sent. Shipping, Handling, and Insurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 5 . 0 0 Total Amount Enclosed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ Use VISA or Master&d preferably. Money order or check must be in U.S. currency only. No COD or cash. l Allow 8 weeks for delivery. l All accessories are subject to availability. l Where applicable, we will ship a superseding model.

or MasterCard by filline in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA card IMPORTANT: Copy complete account number from your Mastercard Copy Number above YOUI name on MasterCard AUTHORIZED SIGNATURE Prices are subject to change without notice. L print or type your name and address clearly. ‘Ibis will be mailing label. your A complete and correct order will save you days of waiting. r--------------------------- I 1 Name: I I 1 Street: I I Apt: I I I City: I I I t State: Zip: I I ----______-----------------A Please make sure that both sides of this form have been filled out completely. 6

If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States ahd Canada Orders To place your order by phone, have your Visa or Mastercard ready and call the toll-free number listed below between 8AM and 8PM Eastern Standard Time. Use this number only to place an order for accessory items listed on this order form. l-800-338-0376 Most times your order will be shipped UPS within 72 hours of receipt. If ever it is not possible to ship within 30 days, we will notify you with an update on your order and an option to cancel. To place your order by mail, detach and mail the completed order form with credit card information, money order, or check in U.S. currency (made payable to Thomson Consumer Electronics, Inc.) to the following address: Video Accessories PO Box 8419 Ronks, PA 17573 For more information on these accessories (or current prices), write to the following address: Video Accessories Customer Service Thomson Consumer Electronics, Inc. Distributor & Special Products 2000 Clements Bridge Rd Deptford, NJ 08096-2088 International Orders This offer is valid only in the United States and Canada. For international orders, please send your request for a price quotation (not an order) to: International Customer Service Thomson Consumer Electronics, Inc. Distributor & Special Products 2000 Clements Bridge Rd Deptford, NJ USA 08096-2088

l Save the packing materials and box in case you ever need to ship or store your camcorder. l The items shown below are packed with your camcorder. If any are missing or appear damaged, contact your dealer immediately. Camcorder: Model CC800 AC Adapter/Charger Part No. CPSOZO Rechargeable 6-Volt Battery Part No. FB1260 Shoulder Strap Part No. ACS091 Cassette Adapter Part No. VCAllS Cassette Adapter Batteq (Size “AA” 1.5 Volt) Audio/Video Output Cable Part No. 221205 Clock Cell 3-Volt Mien, Lithium Cell - Maxell No. CR2025 is available from most I-1 drug stores and camera shops. Use of otber cells present a risk of fire or expktsion.

Adapter/Charger Reference Marks POWER Indicator Power Connector 1. Connect the power connector’s connector flush against the back of the small plug into the DC OUT jack camcorder, and slide it in the direction on the adapter/charger. of the arrow as shown. 2. Align the reference mark on the 3. Plug the adapter/charger’s plug into an power connector with the mark on operating outlet. The adapter/ the camcorder. Hold the power charger’s POWER indicator will light. Charged Battery* __~- 1. Match the reference mark on the battery to the reference mark on the camcorder. 2. Hold the battery flush against the camcorder and slide it in the direction of the arrow. * The battery must be charged before it can be used the first time. Details are on page 18. (continued on next page) 9

\ Cassette Compartment Door 3. Insert a tape. 5.Adjust the handstrap to fit * i l Slide EJECT. your hand. l Turn the tape wheel on the cassette to remove any slack from the tape. l Insert the cassette with the tape wheel facing up and the tape window facing out. l Press on the area labeled PUSH until the cassette door locks into place. 4. Slide the LENS COVER control to open the lens cover. l Lift the flap on the hand strap and separate the velcro strip. l Insert your hand, adjust the strap to fit snugly, and refasten the strap. 10

(Under Flap) &Select a recording speed (SP or EP) with the W/H’ switch. l SP - Standard play provides the best picture, but the shortest recording time (20 minutes with a TC-20 tape). l EP - Extended play provides three times the recording time as SP (60 minutes with a TC-20 tape). EP has slightly more picture noise in normal playback. 7. Set the tape length TC-2O/TC-30 switch. This switch must be set for the camcorder to correctly calculate the recording time remaining on the tape in the camcorder. l Select TC-20 if you are using a tape with 20 minutes or less recording time when using SP recording speed. l Select TC-30 if you are using a tape with more than 20 minutes recording time when using SP recording speed. (continued on next page) 11

POWER (VCRlOFFlCAMERA - I POWER Indicator $ Switch 8. Place the POWER (VW .9. Adjust the viewfinder and OFF/CAMERA) switch in eyepiece focus control. CAMERA. l Rotate the viewfinder into a The POWER indicator will light and comfortable operating position. the camcorder will enter the record- pause mode. * Turn the eyepiece focus control to z PAUSE 3 and - appear in the viewfinder when the camcorder adjust the focus of the vietinder for your vision. is in record pause. The position of this switch tells the camcorder whether you want to record (CAMERA), turn the power off (OFF), or play back tapes (VCR). The camcorder will automatically turn off if it remains in record pause for five minutes. Place POWER in OFF and then back in CAMERA. 1 2

l Press and release the thumb trigger to start recording. REC will appear in the viewfinder, and the tally light will light when the camcorder is recording. l Press and release the thumb trigger again to stop recording. The camcorder is now in the record- pause mode ( = PAUSE = and - appear in the viewfinder). 11. Play back what you have recorded. l Place the POWER switch in VCR. l Press REW to rewind the. tape.- * Press PLAY to play back the tape in the viewfinder. l Press STOP when you are finished playing back the tape. l Details on viewfinder playback are on page 44. 12. Place the POWER switch in OFF to turn off the camcorder. The POWER indicator will turn off. (continued on next page) 1 3

Power Zoom Buttons *W” - Wide Angle “T - Telephoto Electronic Viewfinder Zoom Adjust \ Eyepiece Focus Control Button \ FOCUS LOCK Button Microphone Lens, \ DISPLAY Button 0%. I Remote Control Sentir 14

(continued) DATEITIMEICHAR SELECT + and - Buttons (Also TRACKING Buttons) Q.(Quick) REVIEW Button (Also EDIT Button) I DATEITlhlElCkX4R SET Button I STOP Button PLAY Button . - EDIT SEARCH + n II . 1 1 II \ STOP/PLAY/PAUSE REdi FF I FF Button (Also EDIT &ARCH + Button) SEARCH - Button) POWER (VCRlOFFKAh4ERA) Switch ’ Thumb Trigger BATTERY RELEASE Button AUDIO, RF DC OUT, and VIDEO Shoulder Strap Attachment Ring A&b Battery or Power Connector for AC Adapter/Charger Here 15

The power connector attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery. To AC 100~24OV, Power Connector BATTERY RELEA Attach Adapter/Charger 1. Connect power comrector’s small plug into DC OUT jack on adapter/charger. 2. Hold the power connector flush against the back of the camcorder, and slide it to the right in the direction of the arrow as shown. 3. Plug the adapter/charger’s plug into the nearest AC outlet (lOO-24OV, 50/6OHz). 4. If the adapter/charger is properly connected, its POWER indicator will light. Remove Adapter/Charger 1. Unplug the adapter/charger from the wall outlet. 2. Press and hold BATTERY RELEASE on the camcorder while sliding the power connector to the left and off. Using an optional plug adapter An optional plug adapter may be required in some countries. AC 100~240V 1. Plug the adapter/charger’s plug into the AC plug adapter. 2. Plug the AC plug adapter into the AC outlet. 1 6

The battery must be charged as described on the next page before it can be used the first time. Initial charging will take approximately 70 minutes. When fully charged, the battery should supply about 55 minutes of operating time (depending on how much you use zoom and pause). Conserve battery power by turning the camcorder off during recording breaks. Note: The small marker switch on top of the battery is for use as a personal reminder to help you remember to recharge the battery. It has no other function. BATTERYRELEA (VCRfOFFlCAMER.4) Switch and Indicator Attach the Charged Battery If the power connector is attached to the 3. Place the POWER switch in CAMERA. camcorder, remove it before attaching the The POWER indicator will light. battery. Also, install the lithium clock cell before attaching the battery pack. Remove the Battery Details on page 28. Press and hold BATTERYRELEASE on 1. Align the reference mark on the battery the camcorder while sliding the battery to with mark on back of camcorder. the left and off. 2. Hold battery flush against camcorder and slide it in direction of arrow. ATTENTION: THE PRODUCT THAT YOU HAVE PURCHASED USES A RECHARGEABLE BATTERY. AT THE END OF ITS USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT @ MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE I w MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL Ni-Cd SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR RECYCLING OPTIONS OR PROPER DISPOSAL. 17

To AC Wall Outlet 100440 Adapter/Charger - Side-B Ch’ARGE Indicator END Indicator’ Battery Release Switch POWER Indicator CH-iRGE Indicator aptedcharger - Side A END Indicator’ Battery Release Switch A hIFRESH Switch and Indicator Charging Batteries If the power connector is attached to the DC OUT jack on the adapter/charger, remove its plug. 1. Plug adapter/charger into nearest AC outlet (Ml-24OV, 50/6OHz). The POWER indicator lights. 2. 3. I I I Align reference mark on battery with mark on adapter/charger and press battery pack-in until it locks. If the battery is properly connected, the CHARGE indicator on that side of the adapter/charger will flash. Notes: You may charge two batteries at the same time. Whichever battery you attach first will charge first. The CHARGE 3. When discharging is completed, the indicator will light for the battery that is REFRESH indicator will turn off, and waiting to be charged. the CHARGE indicator will flash while If you try to charge a battery that has not the battery charges. been charged for a long period of time, it may take a few minutes for the CHARGE indicator to flash. Use REFRESH on Side A The battery will provide increased operation time if you “refresh)) it after five charges. The REFRESH feature “refreshes’? the battery by completely discharging it. 1. Attach battery to side A of the adapter/charger. 2. Press REFRESH. The REFRESH indicator will light and the battery will begin discharging. Note: The battery you .attach to side A will always be refreshed first. Then the battery attached to side B will be charged before the battery in side A. 4. After the battery is charged, the END indicator will light. _ _ .._ 4. After one battery is charged, its END 5. Press the battery release switch whrle indicator will light. The other battery’s removing the battery from the CHARGE indicator will flash while it adapter/charger. is being charged. (continued on next page) 18

Battery Warning The battery warning will appear and flash in the camcorder’s viewfinder when the battery needs to be recharged. 4 l-----l l When this indicator appears, place the POWER switch in OFF to turn off the camcorder before replacing the battery. l After replacing the battery, place the POWER switch in CAMERA to place the camcorder in record pause. The battery warning will not be recorded on the tape when it appears in the viewfinder. Battery Warning in Viewfinder Battery Care and Storage II~~ l Recharging takes approximately 70 minutes depending on the battery’s condition. l Refreshing takes approximately 210 minutes depending on the battery’s condition. l After repeated charging and use, operation time will gradually decrease. When operation time becomes too short to be useful, it is time to replace the battery. l If the battery discharging must be stopped in the middle, remove the battery from the adapter/charger before unplugging it from the AC outlet. l Let a hot battery cool down before attaching it to the adapter/charger. l The battery will also provide better service if its power is completely. drained before storing it for long periods of time (30 days or more). l The battery should be charged in the temperature range of 50-95°F (10-3X) to prevent damage. . Do not. operate the battery at temperatures below 32°F (OC) or above 104°F (40C). The battery may be damaged if operated at temperatures above 122°F (50C). Operation time will decrease at extremely low temperatures. l Store the battery at normal room temperature. 1 9

The optional DCCOS car cord shown on page 2 allows you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. It converts 1Zvolts to a 6-volt output. Note: Consult the installation and operating instructions enclosed with the DCC08 for complete operating instructions. / Using the DCCOS Car Cord Adapter ~-----------~~~.-_l.~ Cigarette POWER Indicator Optional DCCOS Car Cord Adapter 1. Place the POWER switch in OFF to turn off the camcorder. POWER indicator turns off. 2. If the battery is attached to the camcorder, remove it. 3. Hold the power connector flush against the back of the camcorder and slide it to the right in the direction of the arrow as shown. 4. Take the vehicle’s cigarette lighter out of the socket. 5. Insert the car cord’s cigarette lighter plug into the vehicle’s cigarette lighter socket. The POWER indicator on the car cord adapter will light. 6. Place the POWER switch in CAMERA to turn on the camcorder. The POWER indicator lights. 20

recording of your home and contents to store in a safe place. l Try to make sure indoor scenes are well-lit. This imtroves picture quality and color reproduction. l Do not move the camcorder rapidly from side-to-side while recording. A steady, gradual “pan” avoids blurring and “jitter”. l Use the viewfinder to make sure the camcorder is level while recording or your scenes will appear “tilted”. l Do not bump or tap the camcorder’s microphone while recording because this sound will be recorded. l Fading in and out of scenes will make your videos appear more professional. l Be aware of video and audio backgrounds. Background details barely noticed while you are taping may show up as visual “clutter” on your recording. Background noises (especially TV sets, radios, household .appliances, traffic sounds, etc.) can detract from the sound you want to record. l Avoid long “still” shots of landmarks and scenic attractions. Recordings are more interesting if they include people and details. “Local color” will give travel videos lasting appeal. Consider recording a familiar or landmark scene from an unfamiliar vantage point. l Include close-up shots of individuals when taping family outings or group functions. Traveling Tips l Write down your camcorder’s serial number and keep it separate from the camcorder when traveling. If your camcorder is lost or stolen, you will be able to identify it. l Make sure you have any plug adapters that you may need before taking your camcorder to other countries. Consult your dealer for advice. l Carry your camcorder in a carrying l Use extra care to avoid damage to your case when traveling. Seepage 4 for a camcorder and accessories when case designed especially for this operating them at a beach or pool. camcorder. An ordinary suitcase or Spray, sand, and dust should be carry bag does not offer the protection avoided. If yourlens has been exposed your camcorder needs. Treat your to the elements, clean it only with camcorder as carry-on luggage to proper lens cleaning supplies. protect it from rough handling. 2 1

tapes or tapes that have been damaged or mishandled can contaminate the video heads, resulting in a snowy picture or no picture at all during playback. Because there is no control over the type of tape purchased or rented by consumers, head cleaning is not covered under warranty. It is considered normal maintenance. The automatic head-cleaning system minimizes the need for accessory cleaners or cleaning by a Servicenter. This system is activated whenever you insert or remove a cassette. Erase Protection - Safety Tab You can use your video cassettes over and over again. To erase a previous recording, just record over it. A. Remove safety tab. B. Cover hole with vinyl tape. Recording Speeds and Times The camcorder records and plays back in standard speed (SP) or extended play (EP). Select the recording speed with the SP/EP switch. The selected speed will be displayed in the viewfinder. Listed below are the maximum SP and EP recording times for popular VHS-C cassettes. 33 YY l SP - Standard play provides the best picture (less picture noise), but the shortest recording time Recording Time (20 minutes with a TC-20 tape). Cassette SP EP l EP - Extended play provides three TC-20 20 Min. 60 Min. times the recording time as SP TC-30 30 Min. 90 Min. (60 minutes with a TC-20 tape). TC-40* 40 Min. 120 Min. EP has slightly more picture noise than SP in normal playback. This * Will probably be available soon. may not be noticeable.

to Close Cassette Before inserting a cassette, turn the tape wheel on the side of the cassette in the direction shown to remove any slack in the tape. ape Wheel + 1. Attach a power supply. Then slide and release EJECT to open the cassette compartment. 2. Insert or remove the cassette. 3. Close the cassette compartment door by pressing on the area labeled PUSH until it locks into place. Cassette Car& and Storage _~ l When you are $nished with a cassette, rewind it, remove it from the camcorder, and label it. l Store cassettes vertically in their protective cases at normal room temperatures. Do not leave your camcorder or cassettes in a car or outdoors for an extended period. Excessive heat or cold may damage your cassettes. l Keep the cassette away from strong magnetic fields such as electric motors and other devices. -~~ l Keep dust from entering the cassette compartment. All dust is abrasive and will cause excessive wear on the tape and the camcorder’s recording or playback heads. l Do not use cassettes with damaged or spliced tape. l Do not use a cassette if it has been damaged or exposed to moisture. The tape may jam and/or damage your camcorder. 2 3

/ Camera Edit / Camera edit allows you to position the tape when the camcorder is in record 4 pause. Place POWER in CAMERA. I l Press and hold REWIEDIT SEARCH - to visually search recorded tape in reverse. 8 Press and hold FFIEDIT SEARCH + to visually search forward on the recorded tape. Release button to return to record pause at that point on the tape. Press the thumb trigger to start recording at this point. Quick Review Press Q.(quick) REVIEW when the camcorder is in record pause to review the last few seconds of a recording. The POWER switch must be in CAMERA. / The camcorder will play back the last II few seconds of the recording, return the tape to its previous position, and return to record pause. Lilly Light The tally light lights when the camcorder is recording. Microphone The microphone picks up the sound during a recording. It is more sensitive to sounds coming from the direction the lens is pointed. 24 \ Tally Light Flying Erase Head A separate erase head is mounted on the spinning headwheel (hence the term “flying”). This allows you to make clean edits without the “glitches” or “rainbow noise” that may occur at the beginning and end of recordings. Auto Head Cleaner The camcorder has an automatic head- cleaning system. Whenever a cassette is inserted or removed, this system is activated. The head-cleaning system minimizes the need for accessory cleaners or cleaning by a Servicenter. Electronic Indexing Each time you begin recording after the date in the camcorder advances and you insert a cassette, an index mark is automatically recorded. When you play the tape in a VCR with a compatible “VHS Index Search System”, the VCR will locate the marks automatically. See VCR owner’s manual for detaiki. INDEX appears briefly in the viewfinder when an index mark is recorded.

seen by the camcorder when recording. Electronic Viewfinder Eyepiece Focus Control m The eyepiece focus control lets you set the focus of the viewfinder for your personal visio . If you wear eyeglasses, you probably k without them. n operate the camcorder It is easiest to set the correct focus by focusing on one of the vieWfinder’s on-screen displays (such as the time counter). Look through the viewfinder and adjust the eyepiece focus control for your vision. The eyepiece focus control does not affect the focus of the picture actually recorded by the camcorder. Tilt Adjustbent For convenient viewing, you can rotate the viewfinder about 180”. 25

Remaining ;s, K A R L I S 1 Warning Indicator i / 01 Focus I POWER switch must be in CAMERA. l Manual Focus Indicators ( rl A ) appear when focus is adjusted manually. l Manual Focus Lock Indicators () l 4) appear when manual focus is locked l Low-Contrast Indicators ( -Ii-i- ) flash when the auto-focus system cannot focus properly. l Details are on pages 34-35. @ Dew Warning ( b ) / The dew indicator appears when j excessive moisture (condensation) ,I has entered the camcorder. The J camcorder will not operate when /: this indicator appears. Place the camcorder in a warm, dry area until /: this indicator disappears. When the dew indicator disappears, the camcorder will operate. 03 Tape Time-Remaining Display l The approximate time remaining on the tape in the camcorder is automatically displayed in the viewfinder. 26 l The time-remaining indicator will start flashing when the remaining tape time reaches two minutes @ Low Battery ( 4 ) l This indicator appears when it is time to recharge the battery. l Details are on page 19. 05 Lithium Cell ( Zb ) l This indicator appears when the clock cell has not been installed or it needs to be replaced. l Details are on page 28. 06 Title l The title you create appears in this area of the viewfinder. l Details are on page 32. @ Status, Cassette Warning ( @Q ), and TAPE END l The ZUX indicator appears here when the camcorder is recording. l The = PAUSE = and - indicators appear during record pause. l The @ indicator flashes when the POWER switCh is set to (continued on next page)

I 08 INDEX--INDEX 0 =PAUSE= 9 F A D E - - FADE Memory Stop D E C 2 5 1 9 9 4 0 10 hite - - MWB Balance D E C 2 5 . 9 4 A M IO:35 CAMERA and the safety tab has been removed from the cassette. l The l&J indicator also flashes when the POWER switch is set to CAMERA and there is no cassette in the camcorder. l TAPE END appears when the end of the tape is reached during recording or a cassette is inserted with its tape already at the end. 08 INDEX l INDEX appears briefly when the camcorder is automatically making an index mark during recording. l Details are on page 24. 0 9 FADE l FADE appears when you press FADE and hashes when the camcorder is fading in or out. l The POWER switch must be set to CAMERA. l Details are on page 36. 0 10 White Balance l The indicator for the manual white balance selected with the A4W.B (manual white’ balance) button appears here. l No indicator appears for automatic white balance. l The POWER switch must be in CAMERA. l Details are on page 37. 011 Tape Speed (SP or EP) l The tape speed selected with the SPIEP switch appears here. l Details are on page 22. @ Elapsed Time-Counter with Memory Stop l The time counter appears during recording and playback. It is not recorded on the tape. l An “M” appears in front of the time counter when memory stop is on. l Details are on page 38. 013 Date and Time Indicators l These indicators are recorded whenever they appear. Details are on pages 30-31. 27

The clock cell indicator & will appear in the viewfinder when the cell has not been installed or needs to be replaced. The cell should last approximately one year. (+ Side Facing Out) 1. Make sure camcorder is turned off, and remove any power supply attached to the camcorder. 4. Close the compartment cover. It will click into place. 2. Press release tab of clock cell compart- To remove battery i ment cover and open the compartment. To remove battery, insert a pointed non- 3. Insert the clock cell with the “+” metallic object between battery and I terminal facing out. compartment and lift. I 28

tapes. The clock cell must be installed. DATEITIiUElCHAR SELECT + and - DATE/TIME1 Switch and Indicator r-7 Set the Date and Time 1. Install the clock cell. 2. Attach a power supply. 3. Place the POWER switch in CAMERA. The POWER indicator will light. 4. Press DATEIT~MElCIdAR SET. The date and time display appear with a flashing cursor on the month. The I flashing cursor lets you know which part of the display you are setting. 5. Repeatedly press DATEITIMEICHAR SELECT + or +- until the correct month appears. Note: .Press and hold the button to rapidly advance the digits. 6. Press DATEITIMEJCH-iR SET to move flashing cursor to the next part of the display. Note: Press and hold the button to rapidly advance the fla$hiig cursor. 7. Repeat steps 5 and 6 until you have entered the correct month, day, year, hour (including AM or PM), and minutes. Note: The clock begins when the minute digits stop flashing. The clock does not keep time while any digits are flashing. Tb Correct the Displays Press DATEITIMEICIUR SET to display the time and date and select the item you want to change. Repeatedly press DATEITIMEKHAR SELECT + or - to enter the correct digit(s). Repeatedly press DATEITIME CHAR SET to remove the flashing cursor and start the clock. (continued on next page) 29

The clock cell must be installed and the date and time set before they can be selected and recorded. 1. Attach a power supply and place POWER switch in CAMERA. The POWER indicator will light. 2. Press DISPLAY to select one of the displays. l Date Display: The date will be displayed and recorded. l Auto Date: The date will be automatically recorded for approximately five seconds. l Auto Date Titler Display: The date is automatically recorded across the center approximately four times larger than the normal displays. 30 l Time Display: The time will be displayed and recorded. l TV On-Screen Display: The viewfinder displays will appear on the screen of a TV connected to the camcorder during record pause. l Date Off: No date or time will be displayed or recorded. l Titler Display: The title you created will be displayed and recorded. Note: If no title has been created, SET CHAR appears and a title can be created. Details are on page 32.

1. Place the camcorder in the record- * This display mode has just been pause mode. selected with DISPLAY. 2. Press DISPLAY to display the mode l The tape has been changed or the you want to record in the viewfinder. tane comuartment opened. The mode you select will be recorded whenever it appears in the viewfinder. If you select either auto mode (AUTO DATE or auto date titler), it will automatically appear, be recorded for five seconds, and then disappear whenever: l The date has been set or changed. 3. Press DISPLAY to remove the display from the viewfinder when you are finished recording it. 4. To record the display again, place the camcorder in record pause and press DZSPLA Y. 3 1

DATEITIMEICHAR SELECT + and - DATE/TIME1 CIL4R SET Button POWER Switch and Indicator DISPLAY Button Creating and Recording a Title 1. Place POWER switch in CAMERA. POWER indicator will light. 2.Repeatedly press DISPLAY to display SET CHAR menu. 3.Press DATE/TIME/CHAR SET. The CHARACTER SET MODE menu appears with a flashing cursor. CHARACTER SET MODE ;<:o A B C D E F G H I J K L H N O P Q R S T U V W XYZiiiiiiii’ 0 1 2 3 4 5 6 7 89:.-l!? 4. Repeatedly press DATEITIMEICHAR SELECT + or - until the first character for your title is flashing. Note: Press and hold the button to rapidly advance the flashing cursor. 5.Press DATEITIiUElClX4R SET to select the character. 6. Repeat 4 and 5 until you have selected up to ten characters for a title. 7.Press DATEITMEICIUR SET to display the title and remove the CHARACTER SET MODE menu. Note: Only one title can be stored. To create a new title, store it over the old one. l--l K A R L I S 1 8.To record the title at any time, repeatedly press DISPLAY to superimpose the title over the scene in the viewfinder. 9.Press the thumb trigger to start recording. The title will be superimposed and recorded over the scene you are recording. lO.When you are finished recording the title, press DISPLAY to remove it from the viewfinder. 32

wide-angle shots just by pressing one of the power zoom buttons. Zoom AdJust Button \ Power Zoom Buttons T = Telephoto = Wide Angle h Adjusting the Zoom Buttons The zoom buttons are easily controlled by your index and middle fingers when you hold the camcorder through the handstrap. The power zoom buttons on the camcorder can be rotated to three positions. l Slide the zoom adjust button while rotating the buttons in a different position l Release the button to lock the buttons in that position. Power Zooming To zoom in or out slowly, press the zoom button lightly. To zoom in or out quickly, press the zoom button firmly. l Press T to move the lens in- the telephoto (close-up) direction. l Press W to move the lens in the wide- angle direction. Note: If you zoom in on low-contrast subjects while recording and auto focus cannot work properly, the camcorder will zoom out and the low-contrast ( +-- ) indicator will appear in the viewfinder. 33

“W” a& “p I LOCUS LOCK Button Auto Focus Macro Focus The camcorder will focus automatically. No indicators appear in the viewfinder during auto focus. Notes: The low-contrast indicator (-%*i -) in the viewfinder indicates the auto- focus system may not operate correctly due to low illumination, low or no contrast, repeated patterns, or two subjects at different distances overlapping. Focus the camcorder manually. If the camcorder has been zoomed in on the subject and the auto-focus system cannot achieve proper focus, the camcorder will automatically zoom out. This may allow the focys system to focus properly. If proper focus still cannot be achieved, adjust the focus manually. The auto-focus system may be used for recording subjects very close to the camcorder. Increased illumination may produce better results. 1. Press power zoom button “Up’ until the lens is completely zoomed out. 2. Position the subject or scene in the center of the viewfinder. in CAMERA Ij ’ 34

, I Indicators ( A-WA. ) 1 Displays in Viewfinder Manual Focus Under certain conditions, such as those listed, you may need to focus manually. 1. Press power zoom button “T” to zoom in on your subject. To maintain proper focus throughout the zoom range, you must zoom in on the subject before adjusting the focus. 2 Press and hold FOCUS LOCK while pressing power zoom button “T” or “W” to display a clear picture in the center of the viewfinder focus. The A A indicators appear in the viewfinder. The 4 or b indicator will flash. When the focus cannot be adjusted any farther, the A indicator will flash. When the focus cannot be adjusted any closer, the A indicator will flash. indicators appear in the viewfinder. 3. Release the power zoom button to lock in the manual focus. The b.4 4. To turn off manual focus, press FOCUS LOCK. The F 0 4 indicators disappear from the viewfinder. Some conditions that may require the use of manual focusing during recording are: l When recording a subject through a window. l When recording a subject having a close foreground and a background that is far away.. l When recording two subjects at different distances that overlap in the same scene. l When the subject is not in the center of the electronic viewfinder. l When recording in low-light situations. l When recording a scene with fast motions, like a tennis swing. 3 5

scenes. The picture will gradually appear or disappear. The speed of the fade is automatically controlled by the camcorder. FADE Button’ Fade In 1. Place the POWER switch to CAMERA. The POWER indicator will light. The camcorder will enter record pause. Center the subject or scene that you want to record in the viewfinder. 2. Press FADE. FADE will appear in the viewfinder. 3. Press thumb trigger to start recording. The screen turns blank and the camcorder will automatically fade into the scene you have selected. FADE flashes in the viewfinder while the camcorder is fading in. FADE Indicator: Fade feature turned on. FADE Indicator Flashing: Fading in pWXSS*I FADE Display in Viewfinder Fade Out 1. During recording, press FADE. FADE will appear in the viewfinder. 2. Press the thumb trigger to stop recording. The camcorder will automatically fade out of the scene and enter record pause. FADE flashes in the viewfinder while the camcorder is fading out. 36

adjusting the way the camcorder “sees” and records the light source in the scene you wish to record. Your camcorder is equipped with automatic white balance. However, under certain cond itions, such as recording an object with various shades of the same r color or when recording a predominant red or brown object outdoors, you may want to adjust white balance manually. PressMWB (Manual White I) Balance) to Display in Viewfinder II 4uto White Balance Outdoors - Cloudy km Button To Adjust White Balance 1. Place the POWER switch in CAMERA. The POWER indicator will light. 2. Press MWB (manual white balance) until one of the manual white balance indicators appear in the viewfinder. l Select -% when recording outdoors on a cloudy day. l Select :+ when recording outdoors on a sunny day. l Select 1%: when recording using halogen or tungsten lighting. l Select MWB when shooting subjects with different color temperatures and adjust the white balance as follows: Outdoors - Sunny c Manual White Balance Halogen or Tungsten L i g h t - Note: Connecting your camcorder to a color TV monitor may be helpful when making white balance adjustments. A. Point camcorder at a white, flat object such as a piece of white paper. B. Press and hold MWB for at least three seconds. The MWB indicator will flash while the camcorder is adjusting white balance and stop flashing when it is ready to record. 3. To have camcorder automatically control white balance, repeatedly press A4WB until no white balance indicator appears in viewfinder. 37

playing back a segment of a prerecorded tape. It helps you locate the end of programs. Note the time counter reading when you finish recording or playing back a tape. For example, you recorded for 10 minutes. Later, you want to locate the end of your recording - insert the tape, display the time counter, and fast forward the tape until the time counter reads “0: 1O:OO”. RESET Button COUNTER MEMORY Butt REW Button POWER Switch To Use the Memory-Stop Feature The memory-stop feature helps locate a certain point on the tape. When memory stop is on, the tape will stop automatically during rewind or fast forward when the time counter reaches M O:OO:OO. 1. Press COUNTER MEMORY to turn the time counter’s memory-stop feature on or off. When memory stop is on, an M appears before the time counter in the viewfinder. Time Counter M 0:OO:OO Display.with Memory Stop Turned On Viewfinder Display 2. Locate the place on the tape you want to return to, and press RESET to set the time counter to M 0:OO:OO. 3. Continue to record or play the tape. When you want to return to the place you marked, press the thumb trigger to stop recording, or the STOP button to stop playing back the tape. 4. Place the POWER switch in VCR. Press REW. The tape will rewind to the time counter reading of M 0:OO:OO. Notes: Whenever the time counter is displayed, you can reset it to iU 0:OO:OO by pressing RESET. Whenever memory stop is on, the camcorder will stop rewinding or fast forwarding when the counter reaches h4 0:OO:OO. To continue rewinding or fast forwarding, press the REW or FF button again. The time counter does not operate during high-speed rewind or fast-forward operation. The time counter’s memory is automatically cancelled when the power supply is disconnected. 3 8

displayed in the viewfinder. The TC-2O/TC-30 switch must be set to the correct position before the camcorder can correctly calculate time remaining. Tape Time P0~~~swit~b Set the TC-2OlTC30 Switch Before recording, set the TC-2O/TC-30 switch for the size of tape you are using. l Select TC-20 when using a tape with 20-minutes or less recording t@e when using SP recording speed. l Select TC-30 when using a tape with more than 20-minutes recording time using SP recording speed. Note: The time-remaining display does not work for TC-40 tapes. Remainin Indicators TAPE END 9 0 M I N -9OMIN I Viewfinder vi! 1 : 89:IN i I I SPYIN 1 2MIN (Flashing) 1 IHIN (Flashing) 1 OMIN (Flashing) The time-remaining indicator will start flashing when the remaining tape time reaches two minutes. TAPE END appears when the tape reaches its end during recording or a cassette is loaded whose tape is already at its end. 39

cassette adapter allows you to play your VI-IS-C cassettes in a VCR just like other standard VHS cassettes. Insert the VHS-C cassette into the cassette adapter. Insert the cassette adapter into the VI-IS VCR like a normal VI-IS cassette. Install Cassette Adapter’s Battery Battery 1. Remove battery compartment cover. 2. Install supplied “AA” battery so positive (+) and negative (-) ends align properly with (+) and (-) terminals in battery compartment. 3. Replace battery compartment cover. Notes: Replace the battery when the load time becomes much longer than normal. Remove the battery from the cassette adapter if it will not be used for a month or more. This will prevent possible damage from battery leakage. If leakage occurs, wipe up the liquid inside the compartment and-replace the battery with a new one. Insert Cassette into Cassette Adapter --.--____P - - A Cassette Tape Wheel 1 1. Before inserting the cassette into the 3. Insert the cassette with the tape adapter, remove any slack in the tape window on the left and facing up. by turning the tape wheel on the side of the cassette. Allow the cassette to drop into the adapter. Do not force the cassette. 2. Slide EJECT to the right to open the cassette compartment lid. I n ,/- IUECT Switch (continued on next page) 4 0

Load Detector 4. Gently close the cassette compartment lid until it locks into place. Make sure the cassette reel area under the adapter is free to turn while the cassette is loading. Note: You should hear a whirring sound while the tape loads. The adapter’s load detector will automatically retract into the adapter. Remove Cassette from Cassette Adapter ~ 1. Slide the adapter’s EJECT switch to the right. The load detector will extend from the side and the whirring sound indicates the tape is being released before the adapter’s cassette compartment lid-opens. 2. Use the access hole on the bottom of the adapter to push the cassette up and remove it from the adapter. 3. Gently close the adapter’s cassette compartment lid. 41

shoulder and - when you are ready to shoot -bring the camcorder to shooting position in one quick movement. To Attach the Shoulder Strap 1. If the strap keeper is over a double section of the strap, slide the strap keeper off the end of the strap. Replace the keeper on the strap between the buckle and the end of the strap as shown. 2. Loop the end of the strap over the top of the shoulder strap attachment ring. Then thread the end of the strap back through the keeper and buckle. Make sure the strap is not twisted. 3. Attach the other end of the strap to the other shoulder strap attachment ring. 4. Adjust the shoulder strap to the desired length. Then slide both keepers up snugly against the shoulder strap attachment rings to prevent the strap from slipping. The lens ring can be removed so you can attach optional accessories, such as wide- angle lens, lens extender, or lens filter kit. To remove the lens ring, grasp the lens ring and turn it counterclockwise. Turn the accessory lens clockwise into the camcorder’s lens. Make sure the lens is tightened firmly, but do not over tighten. 42

Image Sensor: l/3’ CCD Imager Power consumption: 6.5 watts (normal) Tripod Mount: One l/4” x 20 threaded Weight: 1.6 lbs. (720g) hole Dimensions - Including Viewfinder Lens: fU1.8 4.5” x 4.6” x 7.2” 12:1(5.5-66mm) (115 x 118 x 182mm) Diameter: 43 mm Video Recorder Section Format: VHS-C Record/Playback System: Four video record/playback heads One flying erase head Video Signal: EIA Standard NTSC color This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the dealer or an experienced radio/TV technician for help. Alterations or modifications carried out without appropriate authorization may invalidate the user’s FCC right to operate the equipment.

Viewfinder Playback Viewfinder playback is the simplest way to watch tapes using the camcorder. To Play Back a Tape 1. Place POWER switch in VCR. The POWER indicator will light. 2. Slide EJECT and insert the cassette you want to play back. Close the cassette compartment. 3. Press PLAY to begin playback. If necessary, adjust tracking. During playback, use the playback features on the n&page. 4. Press STOP when you are finished. 44 (continued on next page)

STOP. l Press and quickly release REW or FF to rewind or fast-forward the tape. Press STOP to stop the tape. l Press and hold R@W or FF more than two seconds for high-speed rewind or fast forward. Note: The time counter does not operate during high-speed rewind or fast forward. Visual Searching l During playback, press and release FF or REW if you want to search the tape visually in forward or reverse. l Press PLAY to return to normal playback. l For brief searching, press and hold FF or REW for more than two seconds. l Release the button to return to normal playback. Stop-Action Pause l During playback, press PA USE to “stop the action” and view one frame of the tape. l Press PLAY to return to normal playback. Tracking During playback, streaks may appear in the playback picture. Press either TRACKING button to move the streaks up or down and out of the picture. l During stop-action playback, pressing one TRACKING button may reduce picture “jitter” (picture bouncing up and down). Some “jitter” is normal during stop-action viewing. Simultaneously press both TRACKlNG buttons to return tracking to its preset center. Note: The TRACKING buttons may have no effect on tapes recorded on other camcorders or VCR’s. 45

__ ^ To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks, you will need the audio/video cable that came packed with your camcorder. If your TV is already connected to a VCR, YOU can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV. Back of Mono VCR or TV Monitor 01 White Audio Plug Audio/Video Output Cable c-c 2 Yellow Video Plug V - O R - Back of Stereo VCR or Y-Adapter 0I White TV Monitor (Optional) Audio Audio/Video 0..Jack Installation @ Attach the white plug on one end of the audio/video output cable to the AUDIO IN jack on the TV (or VCR). Note: If your TV (or VCR) has stereo jacks, attach the white audio plug to the one labeled MONO. If one is not labeled MONO, you m a y n e e d a Y-adapter, such as AH25, shown on page 3 to hear both channels. I 46 @ Attach the yellow plug to the VIDEO IN jack on the TV (or VCR). 03 Attach the white plug on the other end of the audio/video output cable to the white AUDIO plug (located under the small cover) on the back of the camcorder. @Attach the yellow plug to the yellow VlDEO plug on the camcorder. (continued on next page)

, Playback Opetition and How to Copy apes on the VCR 1. A. Camcorder connected directly to TV: Turn on the TV and tune it to the video inp ut channel. B. Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.) OPerate the TV as you normally do! to see the signal coming from the VCR. 2. Place the PO$ER switch in VCR to turn on the camcorder. The POWER indicator will light. 3. Press PLAY. l If noise bars appear on the screen, press TRACKfhG -or +. l During playback, use the playback features on page 45. 4. To copy what the camcorder is playing, 5. Press STOP when you are finished. place a blank cassette in the VCR, and press the VCR’s RECORD button. Note: Press EDIT to start camcorder playback when copying tapes to improve picture reproduction. Make sure the memory-stop feature is turned off (press COUNTER MEMORY) or the camcorder will enter play pause when the counter reaches M 0:OO:OO. Viewing What fhe Camcorder is Seeing (or Recording) $awMsw~~*~w~ *-av,**b:,sxwa ,,.:.I.,: .__ ::i ~-1: : .‘:I ::j.- .-‘..,.” ::,: 1. A. Camcorder connected directly to TV: Turn on the TV, and tune it to 2. the video in P ut channel. B. Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does 3’ not have a “line” or “camera mode”, consult the VCR owner’s manual.) Operate the TV as you normally do to see the signal coming from the VCR. Place the POWER switch in CAMERA. Note: When the camcorder is used as a camera, turn the TV’s volume down to prevent a high-pitched squeal caused by feedback. Press the thumb trigger to begin recording. You can watch what the camcorder is seeing (or recording) on the TV screen. Note: During record pause, you can see the camcorder’s displays on the TV screen. Repeatedly press DISPLAY. Details are on pages 30-31. 47

,.,,,, _L1.^./ To connect your camcorder to a TV without audio/video inputs, you will need an optional lCVA147C RF output adapter and an optional coaxial RF cable, such as AH065G or AH066G shown on page 3. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages 46-47. VHF Ante1 h 0 z Optional Transformer ( S u c h a s 1 9 3 9 8 3 ) Optional Coaxial RF Cable (such as AH065G or AHO66G) Back of TV IiVFROMAhT Connector 1 CH3/CH4 Switch Optiokal RF Output Adapter (lCVA147C) Installation 0 1 Disconnect the VHF antenna from your TV. Connect the antenna to the iN FROM ANT connector on the RF output adapter if you are going to leave the adapter connected to the TV. Note: If your VI-W antenna is the flat twin-lead type attached by two screws, you will also need an optional 3OOff5 ohm transformer, such as 193983 shown on page 3. 48 O U T , VIDEO Jacks 0 2 Attach one end of the optional coaxial RF cable to the OUT TO TV connector on the adapter, and attach the other end to the VHF input on your TV as shown. Note: If your TV has 300 ohm screw terminals, you will need a 75/300 ohm transformer, such as AH01 1, shown on page 3. 0 3 Attach the RF output adapter’s plug to the AUDIO, RF DC OUT, and VIDEO jacks located under the small cover on the back of the camcorder.

output adapter to channel 3 or 4. 2. Turn on the TV, and tune it to the same channel you selected with the RF output adapter’s CH3lCH4 switch. 3. Place adapter’s VCRITV switch in VCR. 4. Place POWER in CAMERA. POWER indicator will light. 5. Press PLAY on the camcorder. l During playback, use the playback features described on page 45. l If noise bars appear on the screen, adjust tracking as described on page 45. 6. Press STOP on the camcorder when you are finished. Viewing What the Camcorder Is Recording ,,,,,;LAE _ l.,~;~:.~~~~,::-..:.:;l:.,~“~~.~.~~~.~~. ,;~.:=;.,;,;: ~*&4va;wr x*:p&ty<&,*? vr vlbr *‘l.i~~~P~*l,~~~~~~~~~~~:~~~ 1. Turn on the TV and tune it to channel 3. Place adapter’s VCRITV switch in 3 or 4. When the camcorder is used as VCR. a camera, turn the TV’s volume down 4. Place POWER in CAMERA. POWER to prevent a high-pitched squeal caused by feedback. indicator will light. 2. Set the CH3fCH4 switch on the RF 5. Press the thumb trigger to begin output adapter to the same channel recording. You can watch what the you selected on the TV. . camcorder is seeing (or recording) on the TV screen. Note: During record pause, you can see the camcorder’s displays on the TV screen. Repeatedly press DISPLAY. Details are on pages 30-31. Normal TV Viewing EZZEEZE~~~~-,--,-,~~-.~,~ -w*a<- * I &~“~*~“*.~~~>Y&: For normal TV viewing, you may leave the camcorder and place the adapter’s the RF output adapter hooked up to the VCRITV switch in TV. TV. Disconnect the adapter’s plug from Note to Cable TV Installer This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. - - 49

To clean the camcorder’s exterior, remove any power source connected to the camcorder and gently wipe it with a clean soft cloth. Cleaning the Camcorder's tins ~:w~~~~~~~~~~:" .'~;:;,,,:l;,, :.l.:-' s...! : ,,,,,, i,;.;,;;.:. '% .,,. :x.'.'. y RA-,.l, .,k&x*r I *,x: P,b?:wm***,,4 4+,4"- we, _I '*, I, I To clean the camcorder’s lens, blow it with a blower brush, and then gently wipe the lens with cleaning tissue and commercially prepared cleaning solution designed for use on camera lens. Improper cleaning may scratch the lens. Cleaning the Camcorder’s Viewfinder The viewfinder eyepiece can be removed for cleaning. 1. Turn the eyepiece counterclockwise and pull it out. 2. Remove dust using a blower brush. 3. Reattach the eyepiece by aligning the reference marks, and then turn the eyepiece clockwise.

l Keep dust and grit from entering the camcorder’s cassette door. Dust and grit are abrasive, and will cause excessive wear to both the camcorder’s recording/playback heads and cassettes. l Always replace the lens cap on the lens when the camcorder is not in use. l Before handling your camcorder, make sure your hands and face are free from any chemical products such as suntan lotion, as it may damage the finish. l Do not attempt to disassemble your camcorder. There are no user- serviceable parts inside. l Avoid operating your camcorder immediately after moving it from a cold location to a warm location. Give the camcorder 1-M to 2 hours to reach a stable temperature before inserting a cassette. When the camcorder is moved from cold to warm, condensation may cause the tape to stick to the headwheel and damage the headwheel or tape. l Do not aim your camcorder at the sun or other bright objects. l Do not leave your camcorder in direct sunlight for extended periods of time. The resulting heat buildup could permanently damage the camcorder’s internal parts. l Do not operate the camcorder in extremely humid environments. l The camcorder can be damaged by improper storage or handling. Do not subject the camcorder to swinging, shaking, or dropping. l Do not store the camcorder in temperatures below -22°F (-30C) or above 149°F (6X). l When the camcorder is not in use, always remove the cassette and AC adapter/charger or battery. l Retain the original carton for future storage or shipping purposes. l Do not operate the camcorder near the ocean as salt water or salt water spray may damage the internal parts of the camcorder. l Do not operate the camcorder for extended periods in temperatures below 40°F (4C) or above 95°F (35C). l Do not expose the camcorder or adapter/charger to rain or moisture. If either component becomes wet, turn off the power and take the unit to an Authorized RCA Camcorder Servicenter. l Do not use an adapter/charger or batteries other than the ones specified for the camcorder. Use of the wrong accessories may cause damage to the camcorder. 51

the help of a service technician by first checking a few basic remedies. Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter, look below for the type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble. If service should be necessary, the warranty information lists what your warranty covers and explains how to get service. No power Won’t record or playback Won’t playback Won’t record No picture Camcorder turns itself off Tape stops during rewind or fast forward 5 2 l Place the POWER switch in CAMERA or VCR to turn on the camcorder. The POWER indicator will light. l If using battery, it may need to be recharged. If using AC adapter/charger, make sure it is plugged into a working outlet. l If the dew indicator ( 4) flashes in the viewfinder, there is moisture in the camcorder. Wait until the dew indicator no longer appears before operating the camcorder. l Make sure POWER switch in correct position for operation. l There may not be a cassette in the camcorder. l Try ejecting and reinserting the cassette. l The cassette tape may be broken, try another cassette. l You may have reached the end of the cassette, try rewinding it. l POWER switch must be in VCR position. l Safety tab has been removed. (See page 22.) l POWER switch must be in CAMERA. l Open LENS COVER. See page 10. l Place POWER switch to OFF and then in CAMERA or VCR to turn camcorder back on. If camcorder is left in record pause or play pause for several minutes, it will turn itself off to prevent tape wear. Time-counter memory may be on. Whenever an “M’ appears with the time-counter display, the camcorder will stop rewinding (or fast forwarding) when counter reads M 0:OO:OO. Press REW or FF again to continue rewinding or fast forwarding, or press COUNTER MEMORY to turn off the memory-stop feature.

Sound is too low or distorted I Dew indicator flashing in viewfinder Poor auto-focus operation Viewfinder displays are out of focus Colors do not look natural on recording Title recorded on tape Date and/or time were recorded on tape l Press PLAY to return to normal playback. l Subject was too far from camcorder. l If the dew indicator ( 4 ) flashes in the viewfinder, there is moisture in the camcorder. Wait until this indicator no longer appears before operating the camcorder. l Subject is dark or behind glass. Auto-focus may not work under these conditions. See pages 34-35. l Subject is not in center of viewfinder or two subjects are at different distances. Focus manually. See pages 34-35. l Lens is smudged, and image appears unfocused. l Eyepiece focus control is misadjusted. l The small BRZGHT and CONTRAST controls on the bottom of the viewfinder control brightness and contrast of the viewfinder. These controls are set at the factory and should require no adjustment. If the brightness or contrast of the viewfinder ever does require adjustment, carefully remove the small plastic cover and use a plastic screwdriver. Make the adjustments with caution to prevent damaging the miniature controls. Replace the plastic cover. l Try adjusting white balance. Seepage 37. l Title is recorded whenever it appears in viewfinder. Press DISPLAY to remove it from viewfinder. See page 32. l Displays will be recorded on tape whenever they appear in the viewfinder. Press DISPLAY to remove them from viewfinder when recording. See pages 30-31. l When AUTO DATE or auto date titler mode is selected, display will automatically be recorded when you begin recording or change the cassette. Seepages 30-31. (continued on next page) 5 3

l Clock lithium cell battery may need replacing. See page 28. I incorrect l Date or time may need to be set. Seepages 28-29. Vertical white lines l This may occur when background extremely contrasts with appear when shoot- the subject. ing bright object Error number l Try disconnecting power source. Wait ten seconds and then (EOI, E02, etc.) connect power source again. If error number does not appears in disappear from viewfinder, consult your Authorized RCA viewfinder Camcorder Servicenter.

l Any defect in material or workmanship. l 90 days for labor charges. l One year for parts. The warranty period for rental units begins with the first rental. What we will do: l Pay any Authorized RCA Camcorder Servicenter the labor charges to repair your camcorder. l Pay any Authorized RCA Camcorder Servicenter for the new or, at our option, refurbished replacement parts required to repair your camcorder. How you get service: l Check with your RCA Dealer or call l-800-336-1900 for the Authorized RCA Camcorder Servicenter nearest you. If an Authorized RCA Camcorder Servicenter is conveniently near you: l Take your camcorder to the Authorized RCA Camcorder Servicenter of your choice. l Show the Servicenter Representative your.sales receipt or other evidence of purchase date. l Pick up your camcorder when repairs are completed. If an Authorized RCA Camcorder Servicenter is not located conveniently near you: l Pack the camcorder so that it will not be damaged during shipping. (We recommend using the original carton and packing materials.) Include any cables and other accessories originally furnished with the camcorder. l Include in the camcorder carton (1) a copy of your sales receipt or other evidence of purchase date, (2) your name and address, and (3) a brief description of the problem. l Ship the camcorder to an Authorized RCA Camcorder Servicenter. l Pay any charges billed to you by the Servicenter for service not covered by the warranty. What your warranty does not cover: l Customer instruction. (Your owner’s manual clearly describes how to install, adjust, and operate your camcorder. Any additional information should be obtained from your Dealer.) l Installation and related adjustments. l Cleaning of video/audio heads. l Damage from misuse or neglect. l Batteries for clock or other features. l A camcorder that has been modified or incorporated into other products or is used for institutional or other commercial purposes. . A camcorder purchased or serviced outside the USA. How state law relates to this warranty: l This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Product registration: l Please complete and mail the product registration card packed with your camcorder. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. If you purchased your camcorder outside the United States: l See your dealer for details.

Instructions ... ....................................... .lU Accessories, Included ........................... 8 Accessories, Optional.. ...................... l-7 Accessory, Order Form .................... .5-7 Adapter/Charger, Using.. ................ .9,16 Attaching the Shoulder Strap.. ........... .42 AUDIO/RF DC OUTJVIDEO Jacks ........................................ 15,46,48 Audio/Video Cable .................... .8,46,48 Auto Focus .......................................... 34 A u t o Head Cleaner ............................ .24 B Y- BATIERYRELEASE Button.....15,16,17 Battery Level W a r n i n g ................. .19,26 Battery Marker Switch ........................ 17 Battery Safety Precautions ........... .17-19 Battery, Care a n d Storage.. ................ .19 Battery, Charging ................................ 18 Battery, Using Rechargeable......9,17-19 BRIGHT Control........................... .15,53 c - - Camcorder Lens, Cleaning ................ .50 Camcorder, Cleaning .......................... 50 Camcorder, Powering.. ................. .16-20 Camcorder, Turning On.. ................... .12 Camcorder, Unpacking.. ...................... .8 Camera Edit ........................................ 2 4 CAMERA/OFF/VCR Switch ........................... lo-11,12-13,15,19,27, ....................... 29-30,32,38,44-45,47,49 Car Cord Adapter, Optional.. .......... .2,19 Care a n d Maintenance.. ................ .50-51 56 Care and Storage of Battery.. ............. .19 Cassette Adapter ........................... .40-41 Cassette Adapter, Install Battery ........40 Cassette Care a n d Storage ................. .23 Cassette Door ............................ 10,14,23 Cassette Indicators .............................. 26 Cassette, Inserting .............................. .lO Cassettes, Inserting and Removing ..................................... lo,23 CHARJDATEJTIME SELECT + and - Buttons.........15,29,32 CHARJDATEITIME SET Button ............................. .15,29,32 Charging the Battery.. ........................ .18 Checking Problems....................... .52-54 Cleaning Camcorder.. ........................ .50 Cleaning L e n s .................................... .50 Cleaning Viewfinder.. ........................ .50 Clock Battery Indicator................. .26,28 Clock Cell, Installing.. ....................... .28 Contents ............................................... .l CONTRAST Control...................... .15,53 Controls ........................................ .14-15 Copying Tapes.. ............................ .46-47 COUNTER MEMORY Button........15,38 D - - D a t e a n d Time Display.. .......... .27,28-31 DATE/TIME/CHAR SELECT + a n d - Buttons.. .......15,29,32 DATEITIMEICIUR SET Button ............................. .15,29,32 DC Car Cord, Optional.. ................. .3,20 Design Specifications ........................ .43 Dew Warning...................................... 26 DISPLAY Button.. ............... .15,30,31,32 Displays, Viewfinder.. .................. .26-27

EDIT SEARCH - Button.. ............. .15,24 EJECT Button................ .10,12,15,23,44 Electronic Indexing.. .......................... .24 Electronic Viewfinder.. ................. .15,25 EP Indicator.. ................................ .22,27 EPISP Switch.. .................... .11,15,22,27 Erase Protection.. ............................... .22 Eyepiece Focus Control.. ......... .12,15,25 F - - FADE Button ................................ .14,36 FADE Indicator.. ........................... .27,36 Fading I n and Out.. ............................ .36 FF (Fast Forward) Button. ..15,24,44-4 5 First-Time Operation.. .................... .8-15 Flying Erase Head.. ............................ .24 FOCUS LOCK Buttons.. ............... .14,35 Focus Display ....... . ................... 26,34-35 Focusing ....................................... .34-35 H - B Hand Strap, Adjusting ....................... .lO Handstrap.. ..................................... lo,15 I - - Important Safeguards ..................... iv-vii Included Accessories ........................... .8 INDEX Indicator ............................ 24,27 Indexing, Electronic.. ......................... .24 Inserting a Cassette.. .......................... .10 Inserting and Removing Cassettes.. ............. ........................ lo,23 L -- LENS COVER Control.. ................. lo,14 Lens.. .............................................. lo,14 Lens, Cleaning ................................... .50 Lens Ring, Removing ........................ .42 Limited Warranty.. ............................. .55 Low Battery Warning ................... .19,26 -A& Macro Focus ...................................... .34 Maintenance and Care.. ................ .50-51 Manual Focus ..................................... .35 Memory Stop ................................ .27,38 Microphone.. ................................. .14,24 Monopod, Using .................................. .2 MWB (Manual White Balance) Button.. ........................................ .15,37 -o- OFFIVCRIC’ERA Switch ........................... lo-11,12-13,15,19,27, ...................... .29-30,32,38,44-45,47,49 Operation, First-Time.. ................... .8-15 Optional Accessories.. ....................... l-7 Order Form, Accessory .................... .5-7 P -- 1 PAUSE Button.. ....................... .15,44-45 Pause, Stop-Action ............................ .45 PLAY Button.. ........... .13,15,44-45,47,49 Playback ....................................... .44-49 57

.45 Playback on a TV With AUDIO/VIDEO IN Jacks ............ .46-47 Playback on a TV Without Audio/Video Inputs .................... .48-49 Playback Speeds ................................ .22 Playback, First ................................... .13 Playback, Viewfinder ........................ .44 Plug Adapter.. .................................... .16 POWER (CAMERAIOFFIVCR)Switch ........................... lo-11,12-13,15,19,27, ....................... 29-30,32,38,44-45,47,49 POWER Indicator.. ......... lo-11,12-13,15 ............. 19,27,29-30,32,38,44-45,47,49 Power Connector ............................ .9,16 Power Zooming ................................. .33 Powering t h e Camcorder.. ............ .16-20 Problem Solving.. ......................... .52-54 Product Registration ................................ Inside Front Cover Proper Care a n d Storage .................... .51 - - Q Q.(Quick) REVIEW Button . . . . . . . . . . . . 15,24 R - - ’ REC (Record) Indicator.. ......... .13,26-27 Recording and Traveling Tips ........... .21 Recording S p e e d ... ............................. .22 Recording, First ................................. .13 Refreshing t h e Battery ....................... .18 Registration Card......Insid e Front Cover Remote Control Sensor.. .................... .14 Removing t h e Lens Ring ................... .42 RESET Button.. ............................. .15,38 REW (Rewind) Button....13,15,38,44-4 5 RF Output Adapter, Optional.. . ..3,48-4 9 58 S - - Safeguards, Important.. .................. iv-vii Safety Instructions, AC Adapter/ Charger .............................................. iii Safety Precautions ... ............................. .1-H Safety Tab.. ........................................ .22 Searching, Visual.. ............................. .45 Setting the Time and D a t e ................. .29 Shoulder Strap Attachment Rings .15,42 Shoulder Strap, Attaching.. ................ .42 Solving Problems ......................... .52-54 SP Indicator ................................... 22,27 SPjEP Switch...................... .11,15,22,27 Specifications ...................................... 43 Speed, Recording and Playback ........ .22 Status Indicators ........................... .26-27 STOP Button.. .......13,15,38,44-45,47,49 Stop-Action Pause .............................. 45 T - - T (Zoom Button). ..................... .15,33,35 Table of Contents .................................. 1 Tally Light ................................ 13,14,24 TAPE END Display.. ............... .26-27,39 TAPE END Indicators .................. .26-27 T a p e Copying ............................... .46-47 Tape Time Remaining ....................... .39 Tape Time-Remaining Display.. .........26 TC-2O/TC-30 Switch.. .............. .11,15,39 Things to Avoid .................................. 51 Thumb Trigger.......................... 13,15,36 Tilt, Viewfinder.................................. 25 Time a n d D a t e Display.. .......... .27,28-31 Time Counter ................................. 27,38

Z -7 TIhfElChW?/DATE Zoom Buttons ..................... .15,33,34,35 SET Button ...... ..i ..................... ............................................ 33 Time Remaining b 15,29,32 Zooming.. rsplay ............. ..26,3 9 Title in Viewfinder ........................ 26,32 Titler .................................................. .32 TRACKING Buttons ................ .15,44-45 Traveling and Recording Tips ........... .21 Tripod, Using ........................................ 4 Trouble Checks.. ........................... .52-54 Turning On the Camcorder.. .............. .12 u - - Unpacking the Camcorder ................... .8 User Information ................................. 43 Using Cassette Adapter ................ .40-41 -- V VCRICAMERAIOFF Switch ........................... lo-11,12-13,15,19,27, ....................... 29-30,32,38,44-45,47,49 Video/Audio Cable .................... .8,46,48 Video Cassettes ............................. 22-23 Viewfinder ......... ........................... .12,25 Viewfinder Displays.. ................... .26-27 Viewfinder Playback ......................... .44 Viewfinder, Cleaning ........................... 50 Visual Searching .......................F ......... 45 W (Zoom Button). .................... .15,33,34 Warranty, Limited.. ............................ .55 White Balance ..................................... 37 White Balance Indicator ............... .27,37 59

entertainment Dealer or Authorized Servicenter call toll-free in the U.S.A. 1-800-336-1900 Canadian Consumers - Your toll-free numbers are: English: l-800-522-0338 French: l-800-522-0445 If your camcorder needs service, please contact your dealer or the nearest Servicenter from the yellow pages. Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson Consumer Electronics 600 N Sherman Dr, PO Box 1976 Indianapolis, IN 46206 %994 Thomson Consumer Electronics, Inc. Trademark(s)@ Registered Mama(s) RegIstrada(s) Printed in Japan Part Number 94-CCSOO-1 YU30103.306% (VP)