Sharp BD-HP20U - Blu-Ray Disc Player Operation Manual

number (mocated on the rear of the product) in the space provided. l Model No.: Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THiS APPLIANCE TO RAiN OR MOISTURE, ,_ CAUTION ,_ CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks, This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit, "WARNINGmFCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment." INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part t5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECmHED HEREIN MAY RESULT mNHAZARDOUS RADmATmONEXPOSURE. AS THE LASER BEAM USED IN THIS UNIT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

of the Sharp Blu=ray Disc Player. To ensure safety and many years of trouble=free operation of your product, please read the important Safety instructions carefully before using this product. I T SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Blu-ray Disc Player, please read the following precautions carefully before using the product. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Additional Safety Information 15) Power Sources--This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 16) Overloading--Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17) Object and Liquid Entry--Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18) Damage Requiring Service--Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 19) Replacement Parts--When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20) Safety Check--Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21) Wall or ceiling mounting--When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. 22) The mains plug is used as disconnect device and shall always remain readily operable. Q m o Q, c o o (_)-1

for example,neara bath tub, wash bowl, kitchen sink, or laundrytub; in a wet basement;or neara swimming pool; and tile like. k, f ,, Stand -- Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause tile product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only tile mounting hardware recommended by the manufacturer. k.. Selecting the location -- Select a place with no direct sunlight and good ventilation. Ventilation -- The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's instructions are followed. 1 ,, eat -- The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. _ Lightning -- For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the _ | antenna. This will prevent damage to the equipment due to lightning and power line surges. ½_ _] [_ | ,,To prevent fire, never place any type of candle or flames on the top or near the product. 1 J f ,, o prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on tile product. Q=2

,,To prevent fire or shock hazard, do not place the AC cord under the product or other heavy items. ,, Turn off the main power and unplug the AC cord from the wall outlet before handling. ,, To clean the outer cabinet, periodically wipe it with a soft cloth. ,, Do not use chemicals for cleaning. It may damage the cabinet finish. 1 0 0= C 0 0 (_)-3

Player? ...................................................... 5 About Discs .......................................... 6 = 7 About Disc Contents ................................. 8 important information ............................... 9 Getting Started ........................................ 10 Major Components .......................... 11 = 12 O Connection introduction to Connections .................. 13 Video Connections .......................... 14 = 16 Connecting to the HDMI Terminal ........................... 14 Change the video output to HDMI video out ........... 14 Connecting to the Component Jacks ..................... 15 Connecting to the S-video or Video Jack ................ 16 Audio Connections .......................... 17 - 19 Connecting 5.1 ch Speakers through an Amplifier .. 17 Connecting to the Digital Audio Terminal or Jack .... 18 Connecting the Audio Jacks ................................... 19 Repeat Playback of a Title or Chapter (Repeat Playback) .............................................................. 28 Enlarge the playback image (Zoom function) ........... 28 Partial Repeat Playback (Repeat Playback of a Specified Part) ...................................................... 29 Switching Audio ...................................................... 29 Switching Subtitles ................................................. 29 Switching the Angle ................................................ 30 Displaying the Angle Mark ...................................... 30 Settings During Playback ............... 31 = 32 Function Control ............................................. 31 - 32 O Settings SETTINGS ......................................... 33 = 46 AUDIO VIDEO SETI-INGS ............................... 33 - 35 Basic Operation for AUDIO VIDEO SETI-INGS ........ 36 SPEAKER SETTINGS ............................................. 37 Basic Operation for SPEAKER SETI-INGS ...... 37 - 39 QUICK START ........................................................ 40 AUTO POWER OFF................................................ 40 AQUOS LINK.......................................................... 40 PLAYBACK ..................................................... 41 - 42 Basic Operation for PLAYBACK SETI-ING .............. 43 FRONT DISPLAY/LED ............................................ 44 VERSION ............................................................... 44 SYSTEM RESET..................................................... 44 SOFTWARE UPDATE ..................................... 45 - 46 @ Disc Playback Before Starting Playback ................ 20 = 23 Loading the Batteries in the Remote Control ........... 20 Connecting the Power Cord ................................... 20 Setting the Remote Control Code ........................... 21 Operating a SHARP TV Using the Remote Control ... 21 Turning the Power On ............................................. 22 Language Setting ................................................... 22 Turning Off the LCD Backlight and Indications ........ 23 Using AQUOS LINK ................................................ 23 BD/DVD/CD Playback ..................... 24 = 27 Loading a Disc ....................................................... 24 BD/DVD Video Playback ......................................... 24 BD/DVD Menus ...................................................... 25 BD-R/-RE/DVD-R/-RW Playback .................... 26 - 27 Audio CD Playback ................................................. 27 Playback Functions ......................... 28 = 30 Fast Forward/Reverse (Search) ............................... 28 Skipping to the Next or the Start of the Current Chapter (Track)..................................................... 28 Slow Playback ........................................................ 28 Pause/Frame Advance Playback ............................ 28 Skip Search ............................................................ 28 Replay .................................................................... 28 0 Appendix Troubleshooting ............................... 47 = 48 On=screen Error Messages ................... 49 Glossary ........................................... 50 = 51 Specifications .......................................... 52 LIMITED WARRANTY ...................... 53 = 54 * The illustrations and omscreen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. (_)-4

Watching high quality movies on Blu= ray discs This Player offers full high-definition Blu-ray disc playback. _ Enjoying different kinds of discs and contents Use this Player to enjoy various types of optical discs such as DVDs and CDs that contain various multimedia content. Simple connection and operation through HDMI This Player is equipped with an HDMI terminal. You carl connect it to the TV using HDMI and no other cable will be needed to enjoy movies. If your TV is compatible with AQUOS LINK, you can control both the TV and this Player with simple operations. Experiencing surround sound with your speakers This Player carl output 5.1 ch surround sound to the speakers through an amplifien Enjoy the rich feel of a movie theater. What to do first: Refer to "Getting Started" (p. 10) to prepare for watching your discs. O|ntlt'oduction (pp. 1-12) Explains the important operation information. _Colllllllectiolll {pp. 13-19) Shows the connecting options provided by this Player. OSettings {pp. 33-46) Gives you more options to suit your circumstances. OAppendix (pp. 47-54} Provides troubleshooting tips and more information.

reference to see what discs can/ cannot be used with this Player. Each disc has a compatible Recording Format(s) which may present some constraints. For detailed and exact information, read the explanation in pages 6 and 7. [] Can Play Back BD Video (with Region code "A" and "ALL" only) BD-RE Vet.2.1 1L (finalized disc only) BD-R Ver.1.1 1L (*finalized disc only) DVD Video (with Region code "1" and "ALL" only) DVD-RW/DVD-R (ffinalized disc only) DVD+RW/DVD+R (*finalized disc only) DVD-R DL (*finalized disc only) Audio CD CD-RW/CD-R [] Cannot Play Back CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD, SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio BD-RE Ver. 1.0, BD-RE DL, CD-MP3, CD-WMA NOTE * "Finalize" in this manual refers to making sure to have a recording device process on the recorded disc so that it will play in other DVD players as well as this player. Only finalized discs will playback in this player. Blu-ray Disc is the ultimate next generation optical media format, offering the following key features: • Largest capacity (25 GB single layer - 50 GB dual layer) - with over 5 times the amount of content possible with current DVDs, particularly well suited for high definition feature films with extended levels of interactive features Pristine picture quality with the capability for full high definition 1920 x 1080p resolution Best audio possible with uncompressed surround sound (higher quality than even theatre audio) Broadest industry support - ensuring more choice for consumers in the marketplace Hardware products will be backward compatible with DVDs, allowing continued enjoyment of existing DVD libraries Disc Durability - new breakthroughs in hard coating technologies gives Blu-ray Discs the strongest resistance to scratches and finger prints. ,, The following discs can be played back in this Player. Do not use an 8 cm (3") to 12 cm (5") adapter. ,, Use discs that conform to compatible standards as indicated by the presence of official Iogos on the disc label. Playback of discs not complying with these standards are not guaranteed. In addition, the image quality or sound quality is not guaranteed even if the discs can be played back. BD video Region code A/ALL BD RE/BD R (finalized disc only) DVD Video Region code @@ DVD+RW/DVD+R DVD RW/DVD R DVD R DL Audio CD .1 OD RW/CD R {finalized disc only) Video/VR mode Video/VR mode (findlized disc only) Audio CD (OD DA) Audio CD (OD DA) Audio + Video 12 cm (5") (Movie) Audio + Video 12 cm (5") (Movie) 8 cm (3") Audio + Video 12 cm (5") (Movie) 8 cm {5") Audio 12 cm (5") Audio 8 cm (3") This Player has been designed on the premise of playing back Audio CDs that comply with CD (Compact Disc) standards. CDs containing a signal for the purpose of protecting copyrights (copy control signal) may not be able to be played back with this Player. ,, BD/DVD video players and discs have region codes, which dictate the regions in which a disc can be played. This Player's region code is A for BD and 1 for DVD. (Discs marked ALL will play in any player.) ,, BD/DVD Video operations and functions may be different from the explanations in this manual and some operations may be prohibited due to disc manufacturer's settings. ,, If a menu screen or operating instructions are displayed during playback of a disc, follow the operating procedure displayed. ,, The audio component of a DVD video recorded at 96 kHz (Linear PCM) will be output as 48 kHz audio during playback. NOTE " Playback for some of the discs in the tables above may not be possible depending on the disc. * "Finalize" in this manual refers to making sure to have a recording device process the recorded disc so that it will play in other DVD players and on this player. Aecordingly, only finalized discs will playback in this player. (_)=6

discs cannot be played back or will not play back properly on this Player. If such a disc is mistakenly played back, speaker damage may occur. Never attempt to play back these discs. CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD, SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio BD-RE Ver. 1.0, BD-RE DL, CD-MP3, CD-WMA [] Discs with unusual shapes cannot be played. Discs with unusual shapes (heart shaped or hexagonal discs, etc.) cannot be used. The use of such discs will cause malfunction. [] The following BD video discs cannot be played. , Discs not displaying "A" or "ALL" for the region code (discs sold outside the authorized marketing area)..2 Discs produced illegally. Discs recorded for commercial use. *2The region code for this product is A. [] The following DVD video discs cannot be played. Discs not displaying "1" or "ALL" for the region code (discs sold outside the authorized marketing area)..3 Discs produced illegally. Discs recorded for commereial use. .3 The region code for this product is 1. [] The following BD-RE/R, DVD-RW/R, DVD+RW/R discs cannot be played. , Discs on which data has not been recorded cannot be played back. [] The following Audio CD discs cannot be played. Discs containing a signal for the purpose of protecting copyrights (copy control signal) may not be played back with this Player. This Player has been designed on the premise of playing back Audio CDs that comply with CD (Compact Disc) standards. [] The following CD-RW/R discs cannot be played. , Discs on which data has not been recorded cannot be played back. Nomfinalized discs cannot be played back. Discs recorded in a format other than an Audio CD cannot be played back. Discs may not be played back depending on their recording status or the status of the disc itself. Discs may not be played back depending on their compatibility with this Player. O O. C O 0 (_)-7

If the disc has more than one movie on it, each movie would be a separate "Title". "Chapters", on the other hand, are subdivisions of titles. (See Example 1 .) ,, Audio CDs are divided into "Tracks". You can think of a "Track" as one tune on an Audio CD. (See Example 2.) Example 1: Blu=ray disc or DVD MPEG MPEG Audio gives movie theater ambience to audio output when the Player is connected to an MPEG Audio 5.1 channel processor or amplifier. NOTE ,, This Player supports 2-channel (L/R) audio and 5.1 ch (Multi- channel) MPEG Audio 1/2 (only when the DIGITAL AUDIO OUT OPTICAL/COAXIAL jack is used for connection). It does not support 7.1 channel MPEG Audio Vet.2.0. [] Subtitle languages This indicatesthe kind of subtitles. [] Screen aspect ratio Movies areshot ina varietyof screen modes. Example 2: Audio CD The back of the case of a DVD that is commercially available usually contains various information about the contents of the disc. [] [] @)) 1.English UB_ _ 1.English 2. Chinese DIel'rAL 2. Chinese [] m [] [] Audio tracks and audio formats DVD discs can contain up to 8 separate tracks with a different language on each. The first in the list is the original track. This section also details the audio format of each soundtrack--Dolby Digital, DTS, MPEG etc. [] Camera angle Recorded onto some BD/DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). [] Region code This indicatesthe regioncode (playableregioncode). ........ Indicates the functions that can be for BD Video discs. ........ Indicates the functions that can be for BD-RE discs. ........ Indicates the functions that can be for BD-R discs. _#_i_E_ .... Indicates the functions that can be for DVD Video discs. ...... Indicates the functions that can be for DVD-RW discs. Dv_i ....... Indicates the functions that can be for DVD-R discs. _ubi6 _ i........ Indicates the functions that can be for Audio CDs. oefformed oedormed oedormed oefformed oefformed oerformed oefformed Dolby Digital A sound system developed by Dolby Laboratories Inc. that gives movie theater ambience to audio output when the Player is connected to a Dolby Digital processor or amplifier. DTS DTS is a digital sound system developed by DTS, Inc. for use in cinemas. This system uses 6 audio channels and provides accurate sound field positioning and realistic acoustics. (By connecting a DTS Digital Surround decoder, you can also listen to DTS Digital Surround sound.) Linear PCM Linear PCM is a signal recording format used for Audio CDs and on some DVD and Blu-ray discs. The sound on Audio CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD video discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD video discs.) (_)=8

and especially scratches. A scratched disc may not be able to be o played back. Handle discs with care and store them in a safe place. Proper Disc Storage Place the disc in the center of the _ _ [_ disc case and store the case and disc upright. Avoid storing discs in locations ._L_ _,_ subject to direct sunlight, close to ,_ "() " heating appliances or in locations of high humidity. ""_"_ Do not drop discs or subject _-'@ .} them to strong vibrations or / impacts. _] Avoid storing discs in locations where there are large amounts of #._ _-_ dust or moisture, r,_'d_ _._) Audio visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Refer to relevant laws in your country. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. U,S, Patent Nos, 4,631,603 and 4,907,093 ] J " Manufactured under license from Dolby Laboratories. "Dolby" and the double D symbol are trademarks of Dolby Laboratories. . "DTS" and "DTS Digital Out" are trademarks of DTS, Inc. . _e.._ is a trademark. - _ is a trademark of DVD Format/Logo Licensing Corporation. - HDMI, the HDMI logo and High Definition Multimedia Interface are O trademarks or registered trademarks of HDMI Licensing LLC. t= - Java and all Java based trademarks and Iogos are trademarks O or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries. Q Handling Precautions " If the surface is soiled, wipe gently with a soft, damp (water only) cloth. When wiping discs, always move the cloth from the center hole toward the outer edge. - Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids or any other solvent. - Do not touch the surface. - Do not stick paper or adhesive labels to the disc. - If the playing surface of a disc is soiled or scratched, the Player may decide that the disc is incompatible and eject the disc tray, or it may fail to play the disc correctly. Wipe any dirt off the playing surface with a soft cloth. Cleaning the Pick Up Lens " Never use commercially available cleaning discs. The use of these discs can damage the lens. - Request the nearest service center approved by Sharp to clean the lens. Warnings about dew formation - Condensation may form on pick up lens or disc in the following conditions: -- immediately after a heater has been turned on. -- In a steamy or very humid room. --When the Player is suddenly moved from a cold environment to a warm one. When condensation forms: It becomes difficult for the Player to read the signals on the disc and prevents the Player from operating properly. To remove condensation: Take out the disc and leave the Player with the power off until the condensation disappears. Using the Player when there is condensation may cause malfunction.

Getting Started iiiiiiiiii@iii!ii! i!_!!_i!_!!_!!_iiiiiiii_ iiiiiiiiii_!ii!iiiii! _i_ii_ii!_i!_i!_i!_i!ili !!!!!!!!!i_!i'!i'!i'!_i'!_!i 'ii_i_!i_!i _!i_!i'ii 'ii'i!_! (_) =10

2 Remote control sensor (p. 20) 3 Disc tray (p. 24) 4. OPEN/CLOSE (p. 24) 5 DVD/CD mode indicator (p. 22) 6 BD mode indicator (p. 22) "I" 8 9 7 ON indicator (p. 22) 8 STANDBY indicator (p. 22) 9 Front panel display (p. 22) O C O o 9 10 iP /o ® iP c ® v® VIDEO OUr 2 3 4 5 6 11 7 8 1 COMPONENT VIDEO OUT jacks (p. 15) 2 S-VIDEO output jack (p. 16) 3 VIDEO output jack (p. 16) 4. 2CH AUDIO output jacks (p. 19) 5 5.1CH AUDIO OUT jacks (p. 17) 6 HDMI OUT terminal (p. 14) 7 DIGITAL AUDIO OUT COAXIAL jack (p. 18) 8 DIGITAL AUDIO OUT OPTICAL terminal (p. 18) 9 Cooling fan The cooling fan operates while the power to the Player is on. 10 AC IN terminal (p. 20) 1 1 SERVICE terminal for software (p. 45) (_-11

2 _'_OPEN/CLOSE (p. 24) 3 TOP MENU, TITLE LIST (pp. 25, 26) 4. DISPLAY (p. 21) 5 Cursor buttons (A/T/_/I_), ENTER (pp. 22, 36) 6 EXIT (pp. 22, 36) 7 A (Red), B (Green), C (Blue), D (Yellow) (p. 27) 8 AUDIO (p. 29), SUBTITLE (p. 29), ANGLE (p. 30) 9 _ (Lock) (See below.) 1 0 REPEAT (pp. 28, 29), OFF (for REPEAT) (pp. 28, 29) 1 1 _ REV (p. 28) 12 _ SKIP(p. 26) 1 3 REPLAY (p. 28) 14. _ SLOW (p. 28) 15 LIGHT (p. 23) 16 TV CONTROL buttons (p. 21) 1 7 SETUP (pp. 22, 36) 18 POP-UP MENU (p. 25) 19 FUNCTION (p. 31) 20 oJ_"eRETURN (p. 28) 21 ZOOM +/- (p. 28) 22 1_PLAY (p. 24) 23 1_1_FWB (p. 28) 24 H PAUSE(p.28) 25 _1_| SKIP (p. 26) 26 SKIP SEARCH (p. 28) 27 [] STOP (p. 24) 28 HBMI (p. 14) 29 COMPONENT RESET (p. 33) 30 Number buttons (p. 32) 31 ENTER (p. 32) This button is the same operation as 5 ENTER. 32 CLEAR (p. 32) To clear the input number 33 Non-functional buttons These buttons on the remote control are non-functional. They have no operation at all. Keylock function You can set the keylock to prevent accidental operations. This function allows TVs compatible with AQUOS LINK to also perform a Key Lock on the player. Press and hold _=_(Lock) for more than 5 seconds. • Each time you perform this operation, the function is activated or deactivated. If you try to operate the Player while the keylock function is set, "Hold" blinks on the front display panel to indicate that the keylock function is set. [ Ho Id NOTE " This remote control unit is equipped with two ENTER buttons (5 and 31 listed above). The ENTER button under the cover is useful when using with the Number buttons.

listed below. Find the corresponding terminaVjack on your video equipment. Using the supplied cable or commercially available cables, connect the video first. Then connect the audio. Higher Quality (_ Standard Quality HDMI OUT terminal (_ COMPONENT VIDEO OUT jacks Digital audio connection PRIOR PB/CB m COMPONENT VIDEO OUT (_ S-VIDEO output jack ® S'VIDEO (_ VIDEO output jack VIDEO O O o O Higher Quality (_) Standard Quality HDMI OUT terminal (_ DIGITAL AUDIO OUT terminal or jack Analogue audio connection Higher Quality Standard Quality (_) 5.1CH AUDIO OUT jacks CENTER SUBWOOFER ®® ®®R ®®L FRONT SdRROUND 5.1CH AUDIO OUT (_ 2CH AUDIO output jacks 2CH AUDIOT® (_) - 13

When you use AQUOS LINK, make sure to use a certified HDMI cable. 2: Firmly connect an HDMI cable (commercially available} to the HDMI terminals (_ and (_}. " When using an HDMI output, 7.1 ch DigitaJ Output is available. Caution: ,, HDMI output and Component Video output can not be used at the same time. HDMI cable (commercially available) @' I When you connect both an HDMI cable and a component cable to this player, switch to the output terminals by remote control. (The video output is not output both terminals.) I I HDMI 1 Turn on the power. 2 3 Press HDMI button for 5 seconds, and the change of "Component Video Out" and "HDMI Out" is possible. • (Toswitch outputs, it is necessaryto keep the button pressedfor severalseconds.) Also, when the HDMIbutton is pressed, the current setting conditions will display whileflashing (blinking), and then the selected output lamp displays. "Hun - ouL" or "El u - ouL" is displayed alternately on the front panel display. Projector TV NOTE " When you connect this player to a SHARP TV with an HDMI cable only and if the 77/is on, the video output is changed to HDMI output automatically. The following setting is unnecessary. ,, When you connect to the 77/with an HDMI cable only, HDMI video output is set to AUTO. If you don't get the normal image, select the desired resolution. ,, When you are setting HDMI video output besides AUTO, you can only select the resolution that corresponds to the connected 774 Caution: ,, Even when there is no cable connected to the Component video out, switching the output to CP-out (Component video out) is still possible. When CP out is selected, there will be no signal from the HDMI video out. ,, Load a disc and start playback. (Pages 24-27) • If desired, connect audio equipment. (Pages 17-19) Refer to AQUOS LINK function. (See page 23 and 40) (_-14

2: Firmly connect a component video cable (commercially available) to the component jacks ((_ and _). Caution: HDMI output and Component Video output can not be used at the same time. (Red) ._h_ COMPONENT VIDEO OUT Caution: , Press HDMI button for 5 seconds, and the change of "Component Video Out" and "HDMI 0 Out" is possible. 0 Even when there is no cable connected to the :3 HDMI video out, switching the output to HO out (HDMI video out) is still possible. 0 When HO out is selected, there will be no signal from the Component video out. 0 Component video cable (commerciallyavailable) Projector ® (Red) (Blue) TV PR iCR)@ i_ PB (CB>@ -V-- AV receiver Blu-ray Disc LCD TV Player NOTE Connect the BIu ray disc player to LCD TV directly. If you playback the image via VCR, the image may deteriorate due to the copy guard function. When you record the program where copyright is protected, the copy guard function is actiw_ted automatically; the program can not be recorded correctly. Also, the playback image via VCR may deteriorate due to this function. However, this is not a malfunction. When you watch the program where copyright is protected, we recommend that the Blu ray disc player be connected to LCD TV directly. Connect audio equipment or the audio terminals of the TV. (Pages 17-19) (_-15

jacks (_ and (_, or _ and _). ® AV OUT (Yellow) I, ® S-video cable (commercially available) or AV cable (supplied) (Yellow) ii, Blu-ray Disc LCD TV Player _NOTE o Connect the Blu ray disc player to LCD TV directly. If you playback the image via VCR, the image may deteriorate due to the copy guard function. When you record the program where copyright is protected, the copy guard function is activated automatically; the program can not be recorded correctly. Also, the playback image via VCR may deteriorate due to this function. However, this is not a malfunction. When you watch the program where copyright is protected, we recommend that the Blu ray disc player be connected to LCD TV directly. Projector TV © .............. 1 o o AV receiver • Connect audio equipment or the audio terminals of the TV. (Pages 17-19) (_) =16

2: Firmly connect the audio cables to the 5.1CH AUDIO OUT jacks. CENTER SUBWOOFER I V ........... '\ / _TTTTTTTT] e o Amplifier Audio cables I (commercially available) i O o o o NOTE " You can also connect 2 ch stereo speakers through an amplifier. In this case, set the jacks without any speakers connected to "NONE". (Pages 37 39) • Set the size, distance and level of each speaker. (Pages 37-39) Load a disc and start playback. (Pages 24-27) Q=17

to the DIGITAL AUDIO OUT terminal or jack. 2: Firmly connect an optical digital cable (commercially available} to the optical digital audio terminals or a coaxial digital cable (commercially available) to the coaxial digital audio jacks ((_ and _, or (_ and _}. , hen using COAXIAL/OPTICAL output, 5.1 ch Digital Output is available. 7.1 oh Digital Output is not available. @ Coaxial digital cable (commercially available) @ =or, @ Optical digital cable (commercially available) ® © [oo_OOOD/ Amplifier • Load a disc and start playback. (Pages 24-27) (_) =18

or the TV to the 2CH AUDIO output jacks. the AV cable (supplied) to the audio jacks (_ and (_). ....iZii!iii!iii!i!!!!Li!i_iiii!_iii!i_!!i i i,!!:i:i!i_i!!ii!_!!_i!i_!il i[ii: _ 2OH AUDIO FI (Red) AVOUT (White) AV cable (supplied) E/ O O o O (White) (Red) "IV J o Q [oo 0 0 0[/] Amplifier ,, Load a disc and start playback. (Pages 24-27) (_-19

arrow to remove the battery cover. Load the two R-03 size batteries ("AAA" size, UM/SUM-4) supplied with the remote control unit. Make sure that the battery poles _+}and _-} are positioned as indicated. 2 Approximate operating range of remote control Remote control sensor 7m 4 Remote control unit Plug the supplied AC cord into the AC IN terminal on the rear of the Player. Then plug into AC outlet. 3 Slide the battery cover in the direction of the arrow until it clicks. To AC IN terminal NOTE " Do not subject the remote control unit to shock, water or excessive humidity. ,, The remote control unit may not function if the Player's remote sensor is in direct sunlight or any other strong light. ,, Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly. ,, Do not mix old and new batteries, or mix different brands. ,, Remove the batteries if you will not use the remote control unit for an extended period of time. To AC outlet NOTE " Place the Player close to the AC outlet, and keep the power plug within reach. ,, TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE UN INSULATED PARTS OF ANY CABLES WHILE THE AC CORD IS CONNECTED. ,, The STANDBY indicator blinks while the Player is preparing for starting up. You cannot turn the Player on until the STANDBY indicator stops blinking. (_) - 20

RC 1, RC 2 and RC 3. If you operate this Player by remote control along with another SHARP Blu ray Disc Player or DVD Player placed next to it simultaneously, switching the remote control code (both the Player and remote control) to one of the signals (RC 1, RC-2 or RC 3) will let you operate only with this Player. ,, Make sure to set the Player and remote control to the same remote code. You can not operate the Player if they are not set to the same code. The Universal Remote Control may operate the basic functions of the SHARP TV. TV function control ,, TV Power: POWER ,, TV Channel up/down: CH/_ / V ,, TVVolume up/down: VQL ÷/ ,, TVAV Selector: INPUT Setting the Remote Control Code of the Remote Example: Setting the code to "RC-3". 1 Press and hold 3 first and then POWER on the remote control together for more than 5 seconds. 2 Press POWER to turn off the player. POWER Setting the Remote Control Code of the Player 3 Point the remote control at the player, then press and hold the DISPLAY button. Remote control sensor The display on the player changes as shown below, and the player will be set to the same number as the remote control. Example: Change "RC-1" to "RC-3". ,LLApprox. J [ Approx. 3 sec. later I ®[ If remote control does not work First, press Power to turn on the player. Press POWER on the remote control and check the front panel display (RC-1, RC-2 or RC-3). Set the remote control code according to the display and press POWER to see if you can turn on/off the Player. -21

on the Player to turn on the power of the Player. HELL,g] Entering standby Press POWER on the remote control or on the Player to enter standby. If you press POWER again immediately after entering standby, the Player may not turn on. If this happens, wait for 10 seconds or more and then turn on the power again. POWER Changing the on=screen display language 1 Press SETUP to display the SETUP MENU screen. i t_/I i-- 17 I I III--IIU 2 Press A/V/_tI/I_ to select "ON SCREEN LANGUAGE", then press ENTER. DVD/CD mode indicator ON indicator BD mode indicator STANDBY indicator Indicators on the Player ON indicator I Green°n ! p°wer°n ! STANDBY indicator Red blinks Preparing for standby Red on Standby BB and BVD/OD mode indicators Off No disc Blue on Playing back White on Disc stopped White blinks Loading a disc When you turn on the POWER, the MENU screen automatically displays for a while. Press EXIT to erase the display. 3 Press A/T/41/_- to select the language you want to display on the screen, then press ENTER. 4 Press SETUP or EXIT to exit. NOTE To select the DVD disc language, such as subtitle language, etc., (See page 25) (_) - 22

too bright when watching movies, you can turn them off except for the ON indicator. Quick operation Press LIGHT to turn the LCD backlight on or off. SETUP MENU operation 1 Press SETUP to display the SETUP MENU screen. 2 Press A/_'!4/_ to select "SETTINGS", then press ENTER. 3 Press A/T to select "FRONT DISPLAY/LED', then press ENTER. 4 Press 4/1_ to select "ON" or "OFF", then press ENTER. 5 Press SETUP or EXIT to exit. Controlling the BIu=ray disc player using AQUOS LiNK What is AQUOS LINK? Using the HDMI CEC(Consumer Electronics Control), with AQUOS LINK you can interactively operate this player with your SHARP AQUOS TV. What you can do with AQUOS LiNK When you connect this player to the LCD TV compatible with AQUOS LINK using an HDMI cable, you can perform the function listed below. (See page 14 for connecting to the HDMI terminal) Playback function turns on the LCD TV immediately. When you start to playback of this player, Power of LCD TV will be turned on and the playback image will appear on the screen. Automatic input select function When you start playback of this player, the input selector of the LCD TV will automatically switch to the LCD TV input terminal connected to the player and the playback image will appear on the screen, even if you are watching a TV program. Automatic power off function If you turn off the LCD TV when this player is in stop mode, the power of this player will be turned off automatically. (In the case, while playing back a disc, the power does not turn off.) Automatic power on function When you switch to the LCD TV input terminal connected to this player, the power of this player will be turned on automatically. NOTE " In order to make AQUOS LINK available, set up AQUOS LINK on the LCD TV that is connected to this player. See page 40 regarding the setup of this player. Refer to the Operation Manual of the TV for details regarding setup. (_ - 23

available BD Video and DVD Video discs (like movies), CDs, and recorded DVD-RW/R discs. 1 Press POWER to turn on the power. 2 Press OPEN/CLOSE to open the disc tray. POWER OPEN/CLOSE \ 2 Load a disc. • Playback may begin automatically, depending on the disc. Press I_ PLAY. • Playback begins from the first title. • The menu may be displayed first, depending on the disc. Perform playback operation by following the directions on the screen. 3 Load a disc on the disc tray. To stop playback Press _ STOP. 4 • Insert the disc with the label face up. In case of disc recorded on both sides, face down the side to play back. Press OPEN/CLOSE to close the disc tray. Resume playback function " Ifyou press i_ PLAY next, playback will resume from the point where the Playerwas previously stopped. To playbackfrom the beginning,cancel resumemode by pressingmSTOP, then press PLAY.(Thismay notwork depending on the type of disc. In this case, openthe disc tray or enter standby.) (_) =24

video disc with a top menu or disc menu. ,, The titles listed in the top menu and a disc guide (for options like subtitles and audio languages) are given in the disc menu. Start playback by selecting a title from the top menu 1 Press TOP MENU. • The top menu screen is displayed. TOP MENU 2 Press A/T/4/_ to select the title, then press ENTER. The selectedtitle is played back. NOTE " The procedure explained on this page is the basic operation procedure. Procedures vary depending on the BD/DVD video disc, so you may need to follow the instructions in the BD/DVD video disc manual or the instructions displayed on the screen. ,, Atop menu is not displayed for a DVD RW/R (Video mode) if it has not been finalized. Top menu ,, With some BD/DVD discs, the top menu may be referred to as the "Title Menu". Use TOP MENU on the remote control when the instructions refer to "Title Menu". ,, If no top menu is available, the TOP MENU button will have no effect. Using the disc menu Example: Select "SUBTITLE LANGUAGE". Press POP-UP MENU. The disc menu screen is displayed. 2 Press A/V to select "SUBTITLE LANGUAGE", then press ENTER. The screen for selecting the subtitle language is displayed. 1 AUDIO LANGUAGE 3 AUDIO 3 Press A/V to select the subtitle language, then press ENTER. SUBTITLE LANGUAGE 3 Fran£ais 4 Press SETUP or EXIT to exit. - 25

C;;iiiil;iiii _i;i:i:i:ii:::iil;i CIC;;_II Ciil;iil;i:i ,_;il;i;il;_ CJiil CCI:iJiii•::i::i ¸ SKIP SKIP 8 8 CCiii r Playback from the beginning 1 Load a disc recorded in Video mode. 2 Press _ PLAY. • Playback begins from title 1. Playback by selecting a title Load a disc recorded in Video mode. 2 Press TOP MENU. • The TITLE LIST screen is displayed. • The TITLE LIST screen also can be displayed by pressing ENTER alter choosing "DISPLAYS THE TITLE LIST" in SETUP MENU When more than seven titles are displayed, switch pages by pressing _1 SKIP or SKIP. 1 PRO6RAM1 5/21 FRI 110MIN. I Information of selected title Title Name Recording Date Recording Duration Caption for Color Button 3 Press A!T to select the title, then press ENTER. Playback of the selected title will begin, You can playback by pressing _ PLAY instead of pressing ENTER. 4 Press _ STOP to stop playback. NOTE "Finalize" in this manual refers to making sure to have a recording device process on the recorded disc so that it will play in other DVD players as well as this player. Only finalized discs will playback in this player. (_) - 26

in Video mode. 2 Press TOP MENU. • The TITLE LISTscreen is displayed. 3 Press C (Blue), then press ENTER. The PLAYLISTscreen is displayed. Playing back the title you stopped while being played. Press D (Yellow) while the TITLE LIST screen is displayed. 1 PROGRAM1 5/21 FRI 110MIN. 4 5 Press A/T to select the title, then press ENTER Playback of the selected title will begin Press _ STOP to stop playback. Sorting the titles Press B (Green), then press ENTER while The TITLE LIST screen is displayed. 2 Select the type of sorting by pressing A/Y, then press ENTER. The displayed titles are rearranged by selected sorting type. 2 Press 41/_ to select the type of Playback, then press ENTER. Playback of the title will begin. NOTE If a disc recorded in Video mode has been finalized, a menu screen wil be created automatically to enable playback with other BD/DVD players. Because of this reason, the menu screen is different before and after finalization. "Finalize" in this manual refers to making sure to have a recording device process on the recorded disc so that it will play in other DVD players as well as this player, Only finalzed discs wll playback in this player. Playback from the beginning Load an audio CD. 2 Press _ PLAY. Playback begins from the first track. 3 Press [] STOP to stop playback. (_ - 27

'_i SLOW i_ilZilCZIIIIZIIII:, Fast Forward/Reverse functions when ,_ REV or _,_- FWD is pressed during playback. Example: When _ F3ND is pressed ,, The seareh speed will cycle as follows each time you press the button. When playing back a DVD ,, You cannot fast forward or fast reverse from one title and continue to another title (except when playing audio CDs). Skipping (to the beginning of a chapter or track) functions when _ SKIP or _ SKIP is pressed during playback. Slow Playback functions when I, SLOW is pressed during playback. ,, This doesn't work for audio CDs. ,, Press =,-PLAY to returnto normal playback. ,, Pause functions when | | PAUSE is pressed during playback. (if you are playing back an audio CD, the CD will also pause.) ,, Frame Advance Playback functions when SKIP is pressed during Pause. ,, Frame Advance Playback may not function properly with discs other than DVD RW (VR mode). ,, Some BD/DVD Video discs are not compatible with Pause/Frame Advance Playback. Playback skips 30 seconds ahead when SKIP SEARCH is pressed during playback. Playback jumps back 10 seconds when REPLAY is pressed during playback. 1 2 3 Play back the title or chapter you want to repeat. Press REPEAT. Press 4/1_ to select the type of Repeat Playback. * PLAYING BACK TITLE: Repeats the title currently being played back. * PLAYING BACK CHAP: Repeats the chapter currently being played back. . SCENE SELECTION: Repeats the specified scene of title or chapter. 4 5 • Press o_-_ RETURN to cancel without setting the type of Repeat Playback. • For Audio CD, you can select "PLAYING DISC" "PLAYING TRACK" and "SPECIFY THE PART" as Repeat Playback options. Press ENTER. Example: Repeat playback of a title (TITLE) Press REPEAT-OFF to return to normal playback. 2 3 Press ZOOM + while playback. * Three steps can be operated. . Some discs will not be performed on this player. The area that you want to watch is moved using A/T/4/_. If you want to return the image, press ZOOM -. Press ZOOM - several times until it will return. NOTE " This function is not available for AUDIO CD. ,, Zoom function will not operate when subtitle is set to ON. ,, Zoom function will be cancelled when _ REV or _-_ FWD is pressed. ,, Zoom function will be cancelled when | | PAUSE is pressed, depending on the disc. (_ - 28

2 Press 4/_ to select "SCENE SELECTION", then press ENTER. [ i _iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ 3 4 "SET START POINT" displays, press ENTER at the scene where you want. • "SETEND POINT"displays. Press ENTER at the scene where you want to set the end point. You can press _- FWD to fast forward to the scene where you want to set the end point. When you reach the desired scene, simply press _. PLAY and then ENTER to set the end point. To cancel Repeat Playback, press REPEAT-OFF. NOTE " Press |_m_| SKIP, the Repeat Playback is cancelled and the next chapter being played back. ,, Press ll4.,_ SKIP once, the Repeat Playback is cancelled and the player returns to the start of current chapter (track). ,, If you press |4"_ SKIP again (within about 5 seconds) the player will skip to the beginning of the previous chapter (track). ,, For Partial Repeat Playback, set the start and end points within the same title. ,, Repeat Playback may be forbidden depending on the disc. ,, Partial Repeat Playback may not work in multi angle scenes. ,, If you press DISPLAY, you can confirm the Repeat Playback status. You can change the audio output channel using AUDIO. Each time AUDIO is pressed, the audio channels change as follows: The audio track currently being played back will be displayed. VR MODE When a recorded broadcast with a Secondary Audio Program is played back: Switches between "L", "R" and "L+R". When a recorded broadcast with stereo or monaural audio is played back: "Stereo" is displayed. (Audio cannot be switched.) NOTE ,, When you play a program recorded in stereo or monaural, and if you are listening to the BITSTREAM sound via the digital output jack, you cannot select the audio channel. Set "AUDIO OUT" to "PCM" (page 35), or if you want to change the audio channel, listen via the analog output jacks. If subtitles are provided in multiple languages, you can switch between them. Press SUBTITLE during playback. ,, The display indicates the subtitle number currently being played back, and the subtitles appear. Each time SUBTITLE is pressed, the subtitles change. ,, .... is displayed if a disc has no subtitles. ,, You can also select "OFF". Q - 29

(11::i:111¸¸¸3 If multiple angles are recorded, you can switch between them. 1 Press ANGLE during playback. • The display indicates the angle number currently being played back. Each time you press ANGLE, the angle switches. "- -" is displayed if a disc is recorded with only one angle. To return to the previous angle, press ANGLE to cycle through the angles until you return to the original angle. You can change settings so that Angle Mark appears in the right bottom part of the screen when multiple angles are recorded. The settings can be changed in "SEqq-INGS" - "PLAYBACK SEqq-ING" - "ANGLE MARK DISPLAY". (Page 41) NOTE " Settings for audio, subtitles and angle can be changed also in Function Control Screen. (Page 31) ,, The operations of subtitles, angle and audio differ according to each disc. You may need to refer to the operation manual of the disc. ,, The following operations will not workwhen playing back an audio CD: Slow Playback, Frame Advance Display of functions ,, The display for subtitles, angle or audio automatically disappears after 5 seconds. Switching between functions " You can switch the subtitles, angle and audio at the Function Control screen. (Page 31) ,, The operation for each function varies depending on the disc. See the manual for the disc. Fast Forward/Reverse ,, You cannot perform Fast Forward/Fast Reverse between titles. At the end or beginning of the title, Fast Forward/Fast Reverse will be cancelled and normal playback will automatically resume. ,, Subtitles are not played back with BD/DVD video discs during Fast Forward and Fast Reverse. ,, Depending on the disc and the scene being played back, the Player may not operate at the speed listed in this manual when performing Fast Forward. Slow Playback ,, You cannot perform Slow Playback between titles. At the end of the title, Slow Playback will be cancelled and normal playback will automatically resume. Repeat Playback " Repeat Playback may be forbidden depending on the disc. ,, Partial Repeat Playback may not work in multi angle scenes. ,, For Partial Repeat Playback, set the start and end points within the same title. (_) =30

once, like subtitles, angle settings and the title selection for Direct Playback. You can adjust the video and audio to suit your preferences. The operations are the same for BD and DVD. Function control screen i_llllll!i_i!_ii§%%%%%'i'i'i'i'i'i'il ® (_ Playback status display Shows the operation status and the disc type. (_ Setting items Selects a title or chapter for playback, or performs video/audio settings. (_ Operation guide display Provides help on remote control button operations. Function control operation procedure 1 Press FUNCTION during playback. • The Function Control screen is displayed on the TV. 2 Press A/V to select the desired setting, then press ENTER. For a description of each setting,see "Functionswhich can be set". (Page32) i llllllll_llllllllilililililililililililililililililililililililililililililililililililililililil 3 4 Press A/V/_/_ to set, then press ENTER. Operations vary depending on the setting. Follow the operation instructions on the screen. Press RETURN or FUNCTION to close the Function Control screen. NOTE " If .... is displayed for an option like title number or subtitles, the disc has no titles or subtitles which can be selected. ,, The displayed items vary depending on the disc. ,, If you access the Function Control screen during playback of a BD/DVD video, it may be impossible to operate the BD/DVD video playback. In cases like this, close the Function Control screen. (_ -31

Title Number (Direct Title Skip) I " Shows the title number being played back. You can skip to the start of the title. I" To skip to the start of a selected title, press | the Number buttons to enter the title number _.. when this option is highlighted. Chapter Number (Direct Chapter Skip)-. I " Shows the chapter number being played back. | You can skip to the start of the chapter. I " To skip to the start of a selected chapter, press the Number buttons to enter the chapter \ number when this option is highlighted. f Playback Elapsed Time (Direct Time Skip) _-. " Shows the elapsed time from the beginning of the disc to the present. This lets you skip to a specific time. ,, Press _/1_ to select the Hour. Minute or Second. then press A/_' or the Number buttons to set the time. Press ENTER to start playback at the set time. NOTE ,, ENTER button under the Cover: Enters the input number: ,, CLEAR button under the Cover: Clears the input number Subtitle Language -._ Shows the currently selected subtitle language. If subtitles are provided in other languages, you| can switch to your preferred language. _J Angle Number _, Shows the currently selected angle number, if / the video is recorded with multiple angles, you J can switch the angle, j _Audio u) Shows the currently selected type of audio. Yo can select the desired type of audio. i Repeat 1 The current Title (or Chapter) or partial segments can be repeatedly played back. Repeat Playback is also possible with the REPEAT button on the remote control. NOTE ,, These functions may not work with all discs. (_) =32

connected TV changes, you will have to change the "TV ASPECT RATIO" setting. • You can set the screen aspect ratio of the connected TV, and adjust the video output. Select "TV ASPECT RATIO" from "AUDIO VIDEO SETTINGS". WIDE 16:9: Select this when connecting to a 77/with a 1G:9 screen aspect ratio. NORMAL 4:3: Select this when connecting to a TV with a 4:3 screen aspect ratio. LETTER BOX: If you connect to a 77/with a screen aspect ratio of 4:3 and playback a DVD with 16:9 video, the video will be played back with black bands at the top and bottom while maintaining the 16:9 ratio. PAN SCAN: If you connect to a TV with a screen aspect ratio of 4:3 and playback a DVD with 16:9 video, the video will be played back with the left and right sides of the image cut off to display in 4:3 screen aspect ratio. (This function works if the disc is labelled for 4:3PS.) COMPONENT VIDEO OUT • This sets the resolution of the component video output. Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this case, press "COMPONENT RESET" on the remote control for five seconds. Component video out will be reset to 480i (factory preset value). Caution: HDMI output and Component output can not be used at the same time. HDMI VIDEO OUT • This sets the resolution of the HDMI video output. Caution: HDMI output and Component output can not be used at the same time. NOTE " When the BD player is connected to a 1080p 24Hz compatible TV and the HDMI VIDE(] OUT is set to AUTO, 1080p 24Hz will automatically be displayed when compatible discs are played back. WIDE 1G:9 NORMAL 4:3 LETI-ER BOX, PAN SCAN 1080i, 720p, 480p, 480i AUTO, 1080p, 1080i, 720p, 480p O_ ==@ m= (_ - 33

video output to HDMI when it detects this signal. AUDIO OUT You can set AUDIO OUT when connecting to SURROUND sound equipment. t. This sets the audio output connected to SURROUND equipment. ) : sel :i_ t;;tttttttttt HDMI OUTPUT OPTICAL/COAXIAL DIGITAL OUTPUT Select this when you connect using HDMI OUT terminal. Select this when you connect using DIGITAL AUDIO OUT terminal (COAXIAL or OPTICAL). 5. lch AUDIO OUTPUT Select this when you connect using 5.1CH AUDIO OUT jacks. 2oh AUDIO OUTPUT Select this when you do not use SURROUND sound equipment. 2. You can set the audio output mode for each output terminal. Thissets the audio output modefor HDMI OUTterminalwhen selecting HDMI OUTPUT. _ie :i_ t;; tttttttttt AUTO " Select this when connecting to HDMI equipment with a built in decoder for DOLBY DIGITAL, etc. ,, Setting to AUTO will output in an audio output mode best suited to the connected equipment. PCM (SURROUND) ,, Select this when connecting to multi channel HDMI equipment. ,, Setting to PCM (SURROUND) will output by LINEAR PCM by decoding audio signals recorded in each audio output mode such as DOLBY DIGITAL, DTS, AAC. YES, NO HDMI OUTPUT OPTICAL/ COAXIAL DIGITAL OUTPUTT 5.1ch AUDIO OUTPUT 2ohAUDIO OUTPUT AUTO P0M SURROUND) (_) =34

OPTICAL/COAXIAL DIGITAL OUTPUT or 2ch AUDIO OUTPUT DOLBY DIGITAL DTS AAC BITSTREAM PCM (STERE()) " Select this when connecting to SURROUND equipment with a built in decoder for DOLBY DIGITAL, DTS, AAC. ,, Setting to BITSTREAM will output each audio signal by BITSTREAM. ,, Select this when connecting to 2 channel stereo audio equipment. ,, Setting to PCM (STEREO) will output by converting each audio signal into PCM 2channel audio signal. DYNAMIC RANGE CONTROL ,, This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialogue. NORMAL*: The some audio output range is played as the original recorded audio output range. SHIFT: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialogue portion can be heard easily. (If the audio sounds abnormal, set to "NORMAL".) Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers. DOLBY DIGITAL DTS AAC BITSTREAM PCM (STEREO) SHIFT, NORMAL O_ m= (_ - 35

SETI-ING" 1 Press SETUP to display the SETUP MENU screen. 2 Press A/V/4/_ to select "SETTINGS", then press ENTER. 4 Press A/V to select "TV ASPECT RATIO", then press ENTER. 5 Press 4/_- to select the desired item, then press ENTER. 6 Press 4/_ to select the desired format, then press ENTER. 3 Press A/V to select "AUDIO VIDEO SETTINGS", then press ENTER. 7 Press SETUP or EXIT to exit. (_) - 36

with this Player through an amplifier. You can set the speaker size, distance from the viewer, and output level for each speaker. Using multi channel speakers Subwoofer (SW) Centre speaker (C) I Front speaker (L) Front speaker (R) 1 2 Press SETUP to display the SETUP MENU screen. Press A/V/_/_ to select "SETTINGS", then press ENTER. 3 Press A/V to select "SPEAKER SETTINGS", then press ENTER. Surround speaker (LS) Surround speaker (RS) Using 2 channel speakers Speaker (L) Speaker (R) NOTE ,, Refer to the operation manual for the speakers or amplifier for details of speaker setup. ,, Speaker setting cannot be performed with the disc in the disc tray. Take out the disc from the player before setup. 4 Press 4/1_ to select the desired item, then press ENTER. O_ m= (_ - 37

7 Repeat steps 5 and 6 until each speaker's size, press ENTER. and level are set. 6 Press 4/_ to select the preferred item, then press A/V to select the preferred setting, then press ENTER. NOTE " The speakers L and R, LS and RS move relative to one another. ,, The speakers L and R are automatically set to "LARGE" when the subwoofer SW is set to "NO", even after speakers L and/or R are set to "SMALL". ,, The images of speakers set to "NONE" disappear or are greyed out on the screen. ,, As for a subwoofer, there are no settings for distance only for level. 8 Press A/T/4/_ to select "TEST START", then press ENTER. L/R LARGE*, SMALL C/RS/LS LARGE*, SMALL, NONE SW YES*, NO * Factory preset LARGE: The cone diameter is 6.3 inches or larger. SMALL: The cone diameter is smaller than 6.3 inches. lft through 29ft (Settings available in lft increments) The factory preset value: 12ft(L/R/C) 6ft(RS/LS) 6dB through +6dB (Settings available in ldB increments) The factory preset value is 0dB. • After switching to TEST mode, you can hear the Test sound from each speaker in turn. If you press A/T/_II/_ to select the preferred speaker while the TEST sound is present, you can hear the TEST sound of the speaker that you selected. If you press _,/Y/_II/_ to select "TEST TONE STOP" and press ENTER, you can stop the Test sound (_) =38

the settings separately. As for a subwoofer, you can adjust LEVEL only. 9 Press ENTER while the TEST sound is present from the speaker that you want to reset the setting. 10 Press 41/1_ to select the "LEVEL", then press A/V to preferred setting, then press ENTER. 1 1 Repeat steps 9 and 10 until each speaker is reset. 12 Press A/V/4/I_ to select "FINISH", then press ENTER. 13 Press SETUP or EXIT to exit. O_ m= (_ - 39

When the QUICK START function is on, the startup time of the player is reduced when resuming playback from standby. However, power consumption will increase. YES, NO This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes. YES, NO This lets you set the Player to receive the control signal from the AQUOS LINK remote control via the HDMI cable. For details, refer to the operation manual of T_. YES, NO (_) =40

on the disc content. For DVD-video: 8 and OFF: All DVD-video can be played. 1-7: Prohibits play of DVD-video with corresponding ratings recorded on them. For BD-ROM: NO LIMIT: All BD-video can be played. 0-99 year(s): Prohibits play of BD-video with corresponding ratings recorded on them. Parental Control Level cannot be set if a password has not been set. DISCLANGUAGE /INGLEi_K DBPLAY PINCODESETTING _____________________________________________________________________________________________________________________________________________________________ Refer to "Basic Operation for PLAYBACK SEqq-ING" on page 43 for details. DiSC LANGUAGE (DISC PRIORITY LANGUAGE} This lets you select the language for subtitles, audio and menus displayed on the screen. ANGLE MARK DISPLAY This lets you turn the Angle Mark Display on or off when DVD video recorded with multiple angles is played back. (The Angle Mark is displayed in the lower right screen.) I _N_Ek_AL COt_ROL )BCLANGUAGE :IN CODESETTING mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm_ PiN CODE SETTING This sets the password for setting or changing the Parental Control Level. NOTE " When you forget the PIN code, you can reset the current PIN code using SYSTEM RESET under SETTINGS. (p.44) You can also set the new PiN code if desired. For DVD video: OFF, LEVEL 1-8 For BD - ROM: NO LIMIT. LEVEL 0-99 COUNTRY CODE * Refer to the Country Code List. (Page 42) SUBTITLE, AUDIO, MENU * Refer to the Language Code List. (Page 42) YES, NO YES, NO 4 digit number ¢O t,a Q=41

SW Sv,!ahNi AB Abkhazian FAPersian KL Greenlandic OR Oriya TA Tamil AF Afrikaans FI Finnish KM Cambodian PA Panjabi TE Telugu AM Ameharic FJ Fiji KN Kannada PL Polish TG Tajik AR Arabic FO Faroese KO Korean PS Pashto, Pushto TH Thai AS Assamese FR French KS Kashmiri PT Portuguese TI Tigrinya AY Aymara FY Frisian KU Kurdish QU Quechua TK Turkmen AZ Azerbaijani GA Irish KY Kirghiz RM Rhaeto-Romance TL Tagalog BA Bashkir GD Scots Gaelic LA Latin RN Kirundi TN Setswana BE Byelorussian GL Galician LN Lingala RO Romanian TO Tonga BG Bulgarian GN Guarani LO Laothian RU Russian TR Turkish BH Bihari GU Gujarati LTLithuanian RW Kinyarwanda TS Tsonga BI Bislama HA Hausa LVLatvian, Lettish SA Sanskrit TT Tatar BN Bengali, Bangla HI Hindi MG Malagasy SD Sindhi TW Twi BO Tibetan HR Croatian MI Maori SG Sangho UK Ukrainian BR Breton HU Hungarian MK Macedonian SH Serbo-Croatian UR Urdu CA Catalan HY Armenian ML Malayalam SI Singhalese UZ Uzbek CO Corsican IA Intedingua MN Mongolian SK Slovak VI Vietnamese CS Czech IE Intedingue MO Moldavian SL Slovenian VO VolapOk CY Welsh IK Inupiak MR Marathi SM Samoan WO Wolof DA Danish IN Indonesian MS Malay SN Shona XH Xhosa DE German IS Icelandic MT Maltese SO Somali YO Yoruba DZ Bhutani IT Italian MY Burmese SQ Albanian ZH Chinese EL Gr÷ek IW Hebrew NA Nauru SR Serbian ZU Zulu EN English JA.Japanese NE Nepali SS Siswat EO Esperanto JI Yiddish NL Dutch ST Sesotho ES Spanish JW Javanese NO Norwegian SU Sundanese ET Estonian KA Georgian OC Occitan SV Swedish (_) -42

"PLAYBACKSEqq-ING". 1 Press SETUP to display the SETUP MENU screen. 2 Press A/V/4/II_ to select "SETTINGS", then press ENTER. 6 Press 4/_ to select parental control level for DVD video, then press ENTER. Press 4/1_ to select parental control level for BD-ROM, then press ENTER. Press 4/_ to select the country code, then press ENTER. 7 Press SETUP or EXIT to exit. 3 Press A/V to select "PLAYBACK SETTING", then press ENTER. 4 5 When setting the password for the first time. 1. Press 41/l_ to select "YES" to enter the password setting menu, then press ENTER. 2, Enter the 4-digit numben 3. Press ENTER to move to the next setting screen. Press &/V to select "PARENTAL CONTROL", then press ENTER. Enter your password. You cannot move to the next setting screen until you can input the correct password. O_ (1) ==,_N m= (_ - 43

except for the ON indicator. ON, OFF When you select "VERSION", the system software version is displayed. You can reset all settings except the password to the factory presets. RESET, NOT RESET Common operation Example: Setting "FRONTDISPLAY/LED" 1 Press SETUP to display the SETUP MENU screen. 2 Press A/Y/41/_ to select "SETTINGS", then press ENTER. 3 Press A/V to select "FRONT DISPLAY/LED", then press ENTER. 4 Press 4/1_ to select the desired item, then press ENTER. (_) - 44 5 Press SETUP or EXIT to exit.

inserting a USB memory device with the update file into the SERVICE terminal on this player. Regarding how to obtain the software update file, please call t-800-BE-SHARP. CAUTION o De not remove the USB memory device or unplug the AC cord while the software is being updated. 2 3 4 Insert the USB memory device with the update file into the SERVICE terminal on rear of this player. Press SETUP to display the SETUP MENU screen. Press A/T/4/I_ to select "SETTINGS", then press ENTER. Press A/V to select "SOFTWARE UPDATE", then ENTER. • Ifyou alreadyset the password, go to step 6. 7 During the data checking, "Checking" blinks. The current version of this unit software and the version of the update file on the USB memory device are displayed. To update this player software with update file, select "YES", and press ENTER. If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device, an error message is displayed. Check the file on the USB memory device, and then reinsert the USB memory device correctly. 5 Enter the 4-digit number using 0-9. 6 Press ENTER to start checking data in the USB memory device. (_ - 45

dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. 9 ! • If you accidentally unplugged the AC cord or removed the USB memory device, reinsert the USB memory device and plug in the AC cord. The update process is restarted. When the software is successfully updated, a screen is displayed indicating that the update process is completed. After this screen is displayed, the unit automatically turns off and then turns on again. • If the update has failed, check the file in the USB device and try Software Update again. 10 The message "SYSTEM SOFTWARE WAS SUCCESSFULLY UPDATED" is displayed, and then press ENTER. 11 Remove the USB memory device. (_) -46

Refer to the problems and listsof possible solutions below before calling for service. The Player power cannot be turned on. Is the power cord firmly plugged into the AC outlet? When the power cord is plugged into an AC outlet, press and hold POWER on the Player until "_ E 5 E L" appears on the front panel display. Then, after the STANDBY indicator is lit, turn on the power. (Page 48) Press POWER after the STANDBY indicator turns on. The disc is automatically ejected after closing the disc tray. • Make sure that the disc is loaded properly (aligned in disc tray and label-side up). • Take out the disc and clean it. • Make sure that region code on the disc matches that of this Player. Make sure that the disc is playable. No picture. Make sure that the cables are connected correctly. Make sure that the connected TV or the AV receiver is set to the correct input. Take out the disc and clean it. Make sure that region code on the disc matches that of this Player. • There is no picture from the HDMI output. - Are the settings performed correctly? Please check the settings. There is no picture from the Component output. - Are the settings performed correctly? Please check the settings, The Player cannot play a disc. Take out the disc and clean it. Make sure that the disc is loaded properly (aligned in disc tray and label-side up). Make sure that region code on the disc matches that of this Player. Allow any condensation in or near the Player to dry. Check that the disc is recorded in the compatible TV system (PAL or NTSC). The Player cannot play back video which was not recorded normally. Proper playback may be impossible due to the state of the disc recording, a scratched, warped or dirty disc, the state of the pick-up, or compatibility issues between this Player and the disc being used. When the recorded time of a disc is unusually short, playback may not be possible. The settings have been erased. If the Player is unplugged (or there is a power failure) for more than about 1 hour while its power is on, the settings will be lost. Make sure that you turn off the Player before unplugging the power cord. When there is a power interruption or the power cord is unplugged from the power outlet with the power on, all settings return to the factory preset values. The Player power is turned off. Is "AUTO POWER OFF" set to "YES"? When "AUTO POWER OFF" is set to "YES", the power will be automatically turned off after 10 continuous minutes of inactivity (no playback). Screen freezes and operation buttons do not work. • Press [] STOP, then restart playback. • Turn off the power and turn on the power again. • If the power is not turned off, perform a reset. (Page 48) Is the disc damaged or dirty? Check the condition of the disc. See page 10 for details about disc cleaning. The remote control does not work. Set the remote control and the Player to the same remote control code. (Page 21) Use the remote control within its operating range. Replace the batteries. No sound, or sound is distorted. If the volume of the TV or amplifier is set to minimum, turn the volume up. • There is no sound during still mode, slow motion playback, fast forward and fast reverse. DVD audio recorded in DTS is only output from the DIGITAL AUDIO OUT terminal or jack. Connect a DTS compatible digital amplifier or decoder to the DIGITAL AUDIO OUT OPTICAL terminal or COAXIAL jack on this Player. • Check that the audio cable is connected correctly. • Check that the cable plugs are clean. • Take out the disc and clean it. Audio may not be output depending on the audio recording status, such as when audio other than an audio signal or non-standard audio is recorded for the audio content of the disc. The playback screen will be disturbed if DVD video is recorded to a VCR, or played back through a VCR. This Player complies with analogue copy protection. Some discs contain a copy prohibiting signal. If you try to play back such discs through a VCR, or record to a VCR and play back the signal, the copy protection will prevent normal playback. The TV operates incorrectly. Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this Player. Use such Ws away from this Player. There is just audio with no video. Is the connection cable for video output connected properly? Widescreen video appears vertically stretched, or black bands appear at the top and bottom of the screen. Is "TV ASPECT RATIO" set to match the connected TV? (Page 33) • If you are using a widescreen TV, is the "TV ASPECT RATIO" set to "WIDE"? (Page 33) CL X (_ - 47

• Blocks in images may be visible in scenes with rapid movement due to the characteristics of digital image compression technology. Video stops. Has the Player been subjected to shock or impact? Are you using it in an unstable location? The Player will stop if it senses shock or vibration. Left and right channels of audio are reversed, or sound comes out of only one side. Are left and right audio cables connected to the opposite terminal, or is one side disconnected? Disc does not play back automatically. Have you set a disc that has an automatic playback function? The Player heats up during use. When using this Player, the console cabinet may heat up depending on the usage environment. This is not a malfunction. The Player makes a snapping sound when starting playback or loading a disc. The player may sometimes make a snapping sound when starting playback if it has not been operated in a while. These sounds are not malfunctions of the player but are normal operating conditions, Cannot operate the Player. Are you operating the Player within the specified operating temperature range? (Page 52) STANDBY indicator will remain lit. ,, When the AC cord is removed from the outlet, the STANDBY indicator will remain lit for a short period. This is normal and is not a malfunction. NOTE Reset ,, If this Player receives strong interference from a source such as excessive static electricity, strong external noise, mah_unction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not accepting an operation may occur. Press and hold POWER on the Player until "_ E5 E L" appears on the front panel display when the Player does not operate properly even after the power has been turned off. Then, after the STANDBY indicator is lit, turn on the power. ,, When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take a few moments for the system processing to finish before the Player is ready for use. During the system processing, the BD and DVD/CD mode indicators on the front panel display of the Player will blink. Once the system processing has finished, the indicators will finish blinking and then light up normally. You can operate the Player when the BD and DVD/CD mode indicators are lit. ,, Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must be set again. ,, When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the problem, contact the nearest service center approved by SHARR (_) - 48

DVD The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation is not correct. Error message Possible Error Suggested Solution CANNOT PLAY. _ Check the disc, and load it correctly. INCOMPATIBLE DISC. CANNOT OPERATE. ® ® The disc cannot be played back with this Player. If you load a disc which cannot be played with this Player (i.e. a scratched disc), or if you load a disc upside down, this message will appear, and the disc tray will automatically pop out. Occurs if the loaded disc cannot be played because it is a non-standard disc or scratched, etc. Occurs if an operation is incorrect. Remove the disc. t_ I=x (_ - 49

"BD-J" offers content providers almost unlimited functionality when creating interactive BD-ROM titles. BD=R (pages 6, 26) A BD-R (Blu-ray Disc Recordable) is a recordable, write-once Blu-ray Disc. Since contents can be recorded and cannot be overwritten, a BD-R can be used to archive data or for storing and distributing video material. BD-RE (pages 6, 26) A BD-RE (Blu-ray Disc Rewritable) is a recordable and rewritable Blu-ray Disc. BD=ROM BD-ROMs (Blu-ray Disc Read-Only Memory) are commercially produced discs. Other than conventional movie and video contents, these discs have enhanced features such as interactive content, menu operations using pop- up menus, selection of subtitle display, and slide shows. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format for playback on Blu-ray Disc players. Blu-ray Disc (BD) (page 6) A disc format developed for recording/playing high-definition (HD) video (for HDTV, etc.), and for storing large amounts of data. A single layer Blu-ray Disc holds up to 25 GB, and a dual-layer Blu-ray Disc holds up to 50 GB of data. Chapter number (page 32) Sections of a movie or a music feature that are smaller than titles. A title is composed of several chapters. Some discs may only be comprised of a single chapter. DTS This is a digital sound system developed by DTS, Inc. for use in cinemas. This system uses 6 audio channels and provides accurate sound field positioning and realistic acoustics. (By connecting a DTS Digital Surround decoder, you can also listen to DTS Digital Surround sound.) DVD video (pages 6, 7, 24} A disc format that contains up to eight hours of moving pictures on a disc the same diameter as a CD. A single-layer single sided DVD holds up to 4.7 GB; a double layer single- sided DVD, 8.5 GB; a single layer double-sided DVD, 9.4 GB; double-layer double-sided DVD, 17 GB. The MPEG 2 format was adopted for efficient video data compression. It is a variable rate technology that encodes the data to according to the status of the video for reproducing high-quality images. Audio information is recorded in a multi-channel format such as Dolby Digital, allowing for a realistic audio presence. DVD+/=R (pages 6, 26) A DVD+/-R is a recordable, write-once DVD. Since contents can be recorded and cannot be overwritten, a DVD+/-R can be used to archive data or for storing and distributing video material. The DVD+/-R has two different modes: VR mode and Video mode. DVDs created in Video mode have the same format as a DVD video, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. DVD+/=RW (pages 6, 26) A DVD+/-RW is a recordable and rewritable DVD. The re- recordable feature makes editing possible. The DVD+/-RW has two different modes: VR mode and Video mode. DVDs created in Video mode have the same format as a DVD video, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. Copy guard This function prevents copying. You cannot copy discs marked by the copyright holder with a signal which prevents copying. Disc menu (page 25) This lets you select things like the subtitle language or audio format using a menu stored on the DVD video disc. Dolby Digital A sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to audio output when the product is connected to a Dolby Digital processor or amplifier. Dolby Digital Plus A sound system developed as an extension to Dolby Digital, this audio coding technology supports 5.1 multi-channel surround sound. Dolby TrueHD Dolby TrueHD is a Iossless coding technology that supports up to 8 channels of multi-channel surround sound for the next generation optical discs. The reproduced sound is true to the original source bit-for-bit. HDMI HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection. The HDMI connection carries standard to high definition video signals and multi-channel audio signals to AV components such as HDMI equipped TVs, in digital form without degradation. Interlace format Interlace format shows every other line of an image as a single "field" and is the standard method for displaying images on television. The even numbered field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image. Letter Box (LB 4:3} (page 33) A screen size with black bars on the top and bottom of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV. (_) =50

and on some DVD and Blu-ray discs. The sound on Audio CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD video discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD video discs.) MPEG=2 MPEG-2 (Moving Picture Experts Group phase 2) is one of the video data compression schemes, which is adopted for DVD videos and digital broadcasts worldwide. Some Blu-ray Discs also use high bitrate MPEG-2. Resume playback (page 24) If you stop playback while it is in progress, the Player stores the stop position in memory, and this function lets you playback from that point. Skip (page 28) This returns to the start of the chapter (or track) being played, or skips to the next chapter (or track). Subtitles (pages 29, 31, 32} These are the lines of text appearing at the bottom of the screen which translate or transcribe the dialogue. They are recorded on many DVD and BD video discs. Multi Angle (pages 30, 31) This is a feature of DVD and BD video discs. In some discs, the same scene is shot from different angles, and these are stored in a single disc so you can enjoy playback from each angle. (This function can be enjoyed if the disc is recorded with multiple angles.) Multi Audio This is a feature of DVD and BD video discs. This function makes it possible to record different audio tracks for the same video, so you can enhance your enjoyment by switching the audio. (You can enjoy this function with discs recorded with multiple audio tracks.) Pan Scan (PS 4:3) (page 33) A screen size that cuts off the sides of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV. Parental control (page 41) In some digital broadcasts and BD/DVD video discs, a control level for disc viewing is set depending on the age of the viewer. With this Player, you can set the control level for viewing such broadcasts and discs. Time number This indicates the play time which has elapsed from the start of a disc or a title. It can be used to find a specific scene quickly. (It may not work with some discs.) Title number (pages 31, 32) These numbers are recorded on DVD and Blu-ray discs. When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc. Top menu (page 25) In a BD/DVD video, this is the menu for selecting things like the chapter to be played back and the subtitle language. In some DVD videos, the top menu may be called the "Title Menu". Track number These numbers are assigned to the tracks which are recorded on audio CDs. They enable specific tracks to be located quickly. Pop-up menu (page 25) An enhanced menu operation available on BD video discs. The pop-up menu appears when POP-UP MENU is pressed during playback, and can be operated while playback is in progress. Progressive format Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames/60 fields in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper. Region code (page 6) Code identifying a geographic region of compatibility for a BD/DVD. Remote control code (page 21) This is the type of the remote control signal for operating the Player. There are three types of remote control signals: "Remote Control No. 1" (RC-1), "Remote Control No. 2" (RC- 2) and "Remote Control No. 3" (RC-3). X (_ -51

Power consumption (Normal) 25 W Power consumption (Standby) 0.5 W (When "FRONT DISPLAY/LED" is set to "ON") Dimensions Approx. 16 5%64X 2 "/16 X 13 6/_6inch (W x H x D) Weight Approx. 4.0 kg Operating temperature 5°C to 35°C Storage temperature -20°C to 55°C Operating humidity 10 % to 80 % (no condensation) TV systems NTSC system, 525 lines, 60 fields Playback Playable discs BD-ROM, BD-RE (Ver.2.1 1L), BD-R (Ver. 1.1 1L), DVD Video, DVD-R DL, DVD- RW/R, DVD+RW/R, Audio CD (CD-DA), CD-RW/R (CD-DA) Input/Output HDMI HDM119-pin standard connector Component video output Output level: Y: 1 Vp-p (75 ohms) PdCB, PR/CR:0.7 Vp-p (75 ohms) Jacks: RCA jack S-Video output Y-Output level: 1 Vp-p (75 ohms) C-Output level: 0.3 Vp-p (75 ohms) Jack: 4 pin mini DIN Video output Output level: 1 Vp-p (75 ohms) Jack: RCA-pin jack 5.1 ch Audio output Output level: 2 V rms (Output impedance: 1K ohms) Jacks: RCA jack Digital audio optical output Terminal: Square Optical terminal Digital audio coaxial output Jack: RCA jack Audio output Output level: 2 V rms (Output impedance: 1K ohms) Jacks: RCA jack Specifications are subject to change without notice. (_) =52

PUERTO RICO only) CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commer- cial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warran- ties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLI- CABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclu- sive remedy available to the purchaser and only for the time periods set forth herein. No other representations or prom- ises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or other- wise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, altera- tion, modification, tampering, improper operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply. THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND PUERTO RICO Model Specific Section Your Product Model Number & Description: Warranty Period for this Product: Additional Item(s) Excluded from Warranty Coveraqe (if any): BD-HP20U BLU-RAY DISC PLAYER (Be sure to have this information available when you need service for your Product.) One (1) year parts and labor from the date of purchase. Non-rechargeable batteries. Where to Obtain Service: What to do to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARR Please transport the Product in its original packaging and ensure that the Product is covered to avoid scratches and damage. Sharp shall not be responsible for lost, stolen or misdirected mail or for damage to the product incurred during shipping. TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com (_ - 53

Sharp Electronics of Canada Ltd. (hereinafter called "Sharp") gives the following express warranty to the first consumer purchaser for tbis Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein. This warranty shall not apply to: (a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner's manual. (b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres or Sharp's Authorized Servicing Dealers. (c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to head cleaning tapes and chemical cleaning agents. (d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and paper. (e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear. (f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage. (g) Any product received without appropriate model, serial number and CSA/cUL markings. (h) Any products used for rental or commercial purposes. (i) Any installation, setup and/or programming charges. Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp's discretion on any Sharp television with the screen size of 27" or larger and on any Sharp Over-the-Range Microwave Oven. This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with respect to the product and shall constitute fall satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. WARRANTY PER|ODS: Parts & Labour (exceptions noted) Audio Product 1 year Camcorder t year DVD Product 1 year Projector 1 year (lamp 90 days) LCD TV t year Microwave Oven t year (magnetron component-4 additional years) Air Purifier t year Portable Air Conditioner t year To obtain the name and address of die nearest Authorized Sharp Service Centre or Dealer, please contact: SIiARP ELECTRONICS OF CANADA LTD 335 Britannia Road East, Mississauga, Ontario L4Z 1W9 For more information on this Warranty, Sharp Extended Warranty Offers, Sharp Canada Products, Accessory Sales, Dealer or Service SHAFeF' Locations, please call (905) 568-7140 _, Visit our Web site: www,sharp.ca _.. -- sE.wcE Revision 12/16/05 (_) =54

New Jersey 07430-2135 SHARP CORPORATION Printed in Malaysia Imprim6 en Malaisie Impreso en Malasia TINS-D348WJQZ @ 07P09-MA-NG