RCA P46729 Owner's Manual

registration card and return it immediately. Returning this card allows us to contact you if needed. Keep your sales receipt to obtain warranty parts and service and lot proof of purchase. Attach it here and record the serial and model numbers in case you every need them. The numbers are located on the bottom Of your camcorder. Model No. Pro808 Serial No. Purchase Date: Purchased From: AC Adapter/Charger Before using the AC adapter/charger, read all instructions and cautionary markings on (1) AC adapter/charger, (2) battery, and (3) product using battery. Caution: To reduce risk of injury, charge only rechargeable batteries type AV608 or AV8MM. Other types of batteries may burst causing personal injury and damage. Do not expose the adapter/charger tO moisture of any kind. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of.fire, electric shock, or injury to persons.. To reduce risk of damage to electric plug and cord, pull out the cord with the plug rather than the cord when disconnecting the adapter/charger from the wall outlet. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that: 1. Pins on the plug of the extension cord are the same number, size, and shape as those of the plug on the adapter/charger. 2. Extension cord is properly wired and in good electrical condition, and 3. Wire size below is met: Minimum Length of Extension AWG Size Cord (Feet) 18 Equal to or less than 100 16 Equal to or less than 150 Do not operate adapter/charger with a damaged cord or plug. Replace it immediately. Do not operate adapter/charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an Authorized RCA Compact Camcorder Servicenter. Do not disassemble the adapter/charger. Take it to an Authorized RCA Compact Camcorder Servicenter when service or repair is required. Incorrect reassembly may result in a risk of electric shock. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Be sure to save these operating instructions for future reference.

AC adapter/charger will operate on 120-240 volts AC, 50/60 Hz, and has a polarized plug. Because one blade of the plug is wider than the other, the plug fits in thc wall socket only one way. Do not defeat the safety feature of this plug. If you need an extension cord, use a polarized extension cord. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. MISE EN GARDE: POUR PR_VENIR LES CHOCS _LECTRIQUES, INTRODU1RE LA LAME IrA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. IF YOU SPILL LIQUID ON THE CAMCORDER OR ADAPTER/CHARGER, DISCONNECT THE AC ADAPTER/CHARGER'S POWER CORD TO PREVENT POSSIBLE FIRE OR SHOCK HAZARD AND CONSULT AUTHORIZED SERVICE PERSONNEL. MOISTURE CAN DAMAGE INTERNAL PARTS. REFER ALL SERVICE TO AUTHORIZED RCA COMPACT CAMCORDER SERVICENTER PERSONNEL ONLY. CAUTION: READ "IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER" ON THE PREVIOUS PAGE BEFORE USING THE AC ADAPTER/CHARGER. CAUTION: MAINTAIN ELECTRICAL SAFETY. POWERLINE-OPERATED EQUIPMENT OR ACCESSORIES CONNECTED TO THIS UNIT SHOULD BEAR THE UL LISTING MARK OR, IF PURCHASED IN CANADA, THE CSA CERTIFICATION MARK ON THE ACCESSORIES THEMSELVES AND SHOULD NOT HAVE BEEN MODIFIED SO AS TO DEFEAT THE SAFETY FEATURES. THIS WILL HELP AVOID ANY POTENTIAL HAZARD FROM ELECTRIC SHOCK OR FIRE. IF IN DOUBT, CONTACT QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE CAMCORDER OR AC ADAPTER/CHARGER TO RAIN OR MOISTURE. :CAUTION:-- AVOID oPeRATING !_C)OR CAMCORDER i_DIATELY _ MOVING IT FROM A COLD LOCATION TO A WARM LOCATION, GIVE THE CAMCORDER I-I/2 TO2 HOURS TO ......... REACH A STABLE TEMPERATURE BEFORE INSERTING A VIDEO CASSETTE, WHEN MOVED CAUTION DO NOT OPEN MISE EN GARDE !:::i._;i.... NE PAS OUVRIR The symbol of a lightning flash within a triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure and which may be of sufficient magnitude to constitute a risk of electric shock. An exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the product. CAUTION: FCC REGULATIONS STATE THAT ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY VOID THE USER'S AUTHORITY TO OPERATE IT.

attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instru- ment. However, safety is your responsibility too. Thesepages list important information that wil! help to assure your enjoyment and proper use of a camcorder, adapter/charger, and accessory equipment. Please read them carefully before operating your video products. Installation 1. Read and Follow InstructionsmAll the safety and operating instructions should be read before the video product is operated. Follow all operating instructions. 2. Retain Instructions--,-. The safety and operating instructions should be retained for future reference. 3. Heed Warnings--Comply with all warnings on the video product and in the operating instructions. 4. Polarization--This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician tO replace your obsolete outlet. To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension cord, use one with a polarized plug. 5. Power SourcesmThis video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your video dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. 6. Overloading--Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your service technician. 7. Power-Cord Protection_Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or ° o against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the video product. Ventilation--Slots and openings in the video products are provided for ventilation to ensure reliable operation of the video product and to protect them from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the video product manufacturer's instructions have been followed. Attachments--Do not use attachments unless recommended by the video product manufacturer as they may cause hazards. Caution: Maintain elec_cal Safety Powerline operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itsel.f and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shoekor fire. If in doubt, contact qualified service personnel ........... 10. Water and Moisture---Do not use this video product near water--for example, near a bath • tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like. 11. Accessories--Do not plac e this video product On an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult as well as serious damage to the video product. Use this video product only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the video product. Any mounting of the product should follow the manufacturer's instructions and use a mounting accessory recommended by the manufacturer. llA A video product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the video product and cart combination to overturn. 2

is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna- discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example below. Example of Antenna Grounding WIRE ROUND CLAMP ANTENNA DISCHARGE UNIT (NEC.SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION R10-21) ELECTRIC S POWER SERVICE GROUNDING EQUIPMENT . ELECTRODE SYSTEM (NEC ART 250, PART H) 13. Power Lines--An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer. Use 14. 15. Cleaning--Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Object and Liquid Entry--Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or "short-out" parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. 16. Lightning--For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power line surges. Service 17. 18. Servicing--Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Conditions Requiring ServiceMUnplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the video product. C. If the video product has been exposed to rain or water. D. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. E. If the video product has been dropped or the case has been damaged. F. When the video product exhibits a distinct change in performance--this indicates a need for service. 19. Replacement PartsEWhen replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the video product manufacturer can prevent fire, electric shock, or other hazards. 20. Safety Check--Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks recommended by the manufacturer to determine that the video product is in safe operating condition. 3