RCA DRC8295N Operation & User’s Manual

Specifications

Brand: RCA
Category: DVD VCR Combo
Model: DRC8295N (Operation & User’s Manual)
File Type: PDF
File Size: 12.88 Mb
Pages: 63

Read Online

Read the RCA DRC8295N Operation & User’s Manual online using the built-in PDF viewer.

Text of the manual

This symbol indicatesthat this product incorporates double

ins@adonbetween hazardousmainsvoltage and user accessibleparts. This symbol indicates"dangerous voltage" insidethe product that presents a risk of electric shock or personal iqury. This symbol indicates important instructions accompanyingthe product. FCC JNFORHATmON This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designedto provide reasonableprotection againstharmful interference in a residential installation.This equipment generates,usesand can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, maycause harmful interference to radio communications. However,there is no guaranteethat interference will not occur in a particular installation.If this equipment does causeharmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures, Reorient or relocate the receivingantenna. Increasethe separation between the equipment and receiver. Connect this equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This classB digital apparatusmeets al!requirements of the CanadianInterference - CausingEquipment Regulations.ThisclassB digital apparatuscomplies with CanadianCES-O03. Cet appareil num6rique de la classBest conforme _ lanorme du NHB-O03 du Canada. i eferto the identification/rating label located on the back par@ofpur product for its proper operating voltage. Product Registration Pleasefill out the product registration card and return it immediately,Returning the product registration card allows usto contact you if needed, Keep},our salesreceipt to obtain warranty parts and service and for proof of purchase.Attach it here and record the serial and model numbers in caseyou needthem,The numbers are located on the back of the DVD Recorder, Model No. DRC8:_eSN Purchase Date: Serial No. Dealer/Address/Phone: WARNIING To reduce the risk of fire or shock hazard,do not expose this DVD Recorder to rain or moisture, CAUTION THIS PRODUCT UTILIZESA LASER,USEOF CONTROLS OR ADJUSTHENTS OR PERFORMANCE OF PROCEDURESOTHERTHAN THOSE SPECIFIED HEREIN HAY RESULTIN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERSAND DO NOT REPAIRYOURSELEREFERSERVICJNGTOQUALIFIED PERSONNEL. CAUTION FCC Regulationsstate that unauthorized changesor modifications to this equipment mayvoid the user's authority to operate it. Note: This DVD Recorder isdesignedand manufactured to respond to the RegionNanagementInformation. If the Regionnumber of a DVD disc does not correspond to the Regionnumber of this DVD Recorder this DVD Recorder cannot play the disc.The Regionnumber for this DVD Recorder isRegion No I, Note: This device is protected by U.S.patent numbers4,631,603 and 4,577,216and 4,819,098 and other intellectual property rights,The useof Macrovision'scopy protection technology in the devicemust be authorized by !lacrovision and is intended for home and other limited pay=per-viewusesonly, unlessotherwise authorized in writing by Hacrovision. Reverseengineeringor disassemblyis prohibited. The apparatusshall not be exposed to dripping or splashing and that no objects filled with liquids,such asvases,shallbe placed on the apparatus. Ventilation: You must adequatelyventilate the product, Hake sure there isadequatespacearound the DVD RecorderNCR to provide proper air flow for ventilation, Seediagram, TheAC power cord ispolarized (one blade iswider than the other) and only fits into AC outlets one way,If the plugwon't go into the outlet completely,turn the plugover and try to insert it the other way,If it still won't fit, contact a qualified electrician to changethe outlet or usea different one. Do not attempt to bypass this safetyfeature,

Table of Contents

Chapter I: Connections and Setup Types of Discs ....................................................... 2 Thin_s to consider before yoe connoct ................................. 2 UnpasB tho Box ..................................................... 2 Choose yoor connection .............................................. 3 E×plenetion of jacks end Cebles ....................................... `$ Back of the DVD/VCR ................................................ 5 Front of the DVD/VCR ............................................... 7 ¢onnoctiom DVD/VCR ÷ TV ........................................... 8 Connection: DVD/VCR + TV + Coble Bo× .............................. 18 Connection: DVD!VCR ÷ TV ÷ Satellite Receiver ........................ t2 Advanced Aedio Connection Information .............................. I`$ Instaff batteries in tho remote control ................................. t5 Turn on the TV and the DVD/VCR .................................... J5 Complete Intoractive Setup .......................................... 15 What to Expect ..................................................... i 7 How to find your TV_s Video Input Channel ............................ 18 Next Steps ........................................................ 18 Chapter 2: The Remote Controt Explenetion of buttons .............................................. 28 Find oot if the remote can bo programmed to operate your TV ........... 21 Programming the remote to operate yoor TV .......................... 21 Programming the remote to operate other components ................. 22 Usin_ the remote to operate other components ........................ 28 Code list for programmin_ the remote control ......................... 23 Chapter 3: Using the Re¢order_s Features Watching TV ...................................................... 28 The Chonne_ Banner ............................................. 28 DVD Recording ..................................................... 28 Express recording ................................................ 28 Watching one channol while you record another channel ............. 28 Watchin_ e xideocessette tape while you record to disc .............. 28 Copyin_ e DVD disc (DVD+R or DVD+RW) to tape ................... 29 Timer Recordings .................................................. 30 Disc Library ....................................................... 3 t Editing the Genro of a Title ....................................... 3 l Findin_ a title (movie_ pro_ram_ etco) by using tho 8oft Foeture ........3 i DVD Playback ...................................................... 32 Editing DVD÷R and DVD+BW discs ................................ 33 Editin_ ti_esusin_ the Hide Chapter Feature ........................ 3`$ VCR Basics ........................................................ 3,$ Besic Playback .................................................. 3`$ Besic Rocording ................................................. 3`$ Advanced VCR Featoros ............................................. 35 Advenced Pleyback .............................................. 35 VCR Info Display ................................................ 35 VCR Recordin_ ..................................................... 36 Express Recordin_ ............................................... 36 Watchin_ one ¢hanno_whffe you recordanother channe_ ............. 36 WatchBt_ e DVD discwhile you record to tepe ...................... 38 ¢opyin_ e videocessette tape to a DVD disc (DVD+R or DVD+RW) .....36 Chapter 4:Pi_yingDiscs Be_ionel ¢odin_ .................................................... 38 Types of discs you can play .......................................... 38 How to Load end Pley Discs .......................................... 38 Usin_ Difforent Henus .............................................. 39 Search Options ..................................................... 39 Pleyback Options ................................................... 39 Usin_ the On-Screen Info Display ..................................... 39 Time Display ................................................... `$I Selectin_ e Title on DVDs or e Track on Audio CDs or VCDs ........... `$1 ¢hepter Icon ................................................... `$I SebDtle leon ................................................... `$I Repeat Icon .................................................... `$_ Audio Icon ...................................................... 4;_ Demote Angle Icon ............................................... 43 PlayHods Icon ................................................. 4`$ IntroScan (Audio CD only) ........................................ 44 PieyBeckControl (PBC)_Video CD only ............................ 44 Pleyin_rap3end/orJPBG B_es ........................................ 44 Viewin_ _PEGfi_es .................................................. `$5 Chapter 5: The Hen_ System Overview of the _onu System ....................................... `$7 The Moin Henu .................................................... 47 Watch TV ......................................................... `$8 Disc .............................................................. 48 Play Disc ....................................................... 48 Disc Title Hone ................................................. `$8 PleyerHenu .................................................... 48 Pleylist ........................................................ `$8 Copy Disc ...................................................... 48 Disc Options .................................................... `$9 Autoplay .................................................... 49 Screen Eormat ............................................... `$9 An_e Icon ................................................... 49 Tape .............................................................. 49 Pley Tape ...................................................... 49 P_eyfrom Stert ................................................. 49 Copy Tape ..................................................... 49 Review A-B Edits ................................................ `$9 De_ete A-B Edits ................................................ `$9 Tape Options ................................................... `$9 Tape AutoPIay ............................................... 49 Pleybeck Hode (Digitel or Analog) ............................... 49 AutoRewind .................................................. `$9 Disc Library ....................................................... 50 Timers ............................................................ 50 Setup ............................................................. 50 Parente_ Controls ............................................... 58 Lock/Un_ock ................................................. 50 Bering Limits ................................................. 50 Unreted Titles ............................................... 51 System Options ................................................. 5 l Digital Ootput ................................................ 5 l SR$/TroSurround ............................................. 5 l Block Level .................................................. 51 Display Dimmer ............................................... 5 l Audio Broadcast .............................................. 5 l Rocording Options .............................................. 5_ Becord Destination ........................................... 5:_ Becording Quelity ............................................. 5'_ Tape Speed .................................................. 52 Smart Record ................................................. $_ Disc Options ..................................... note to see pa_e `$_ Tape Options .................................... note to see pa_e 4_ Lan_ua_os ...................................................... 5'_ Display ...................................................... 5_ Aodio ....................................................... 5_ Subtitles .................................................... 5_ Disc ......................................................... 5'_ Instellation Heno ............................................... 53 Interactive Setop ............................................. 53 Channel Soorch ............................................... 53 Clock Sotop .................................................. 53 Channel List ................................................. 53 Chapter 6: Addition_()nfor_tion TroobleshooDn_ .................................................... 55 Hendlin_ Ceutions .................................................. 58 Heintenanse of Cabinet ............................................. 58 Limited Werranty .................................................. 59 Accessories ........................................................ 80

not be compatible

due to I_ser pickup end disc design° RECORDING; TYPES OF DISCS YOU CAN USE FOR RECORDING DVD+R 2,4×_4×_ or 8x ONLY; DVD+RW 2Ax and 4× ONLY. NOTES: ItisNOT possibleto recordon CD-R orCD_RW discs. IF_PORTANT:ItisNOT possibletorecordcontentthatiscopy-protected.This isusuallytrueformost premecordedDVD discsand most pre-recorded VHS tapes. PLAYBACK_ TYPES OF DISCS YOU CAN PLAY DVD discs - DVD movie discs(DVD=ROH); DVD+R; DVD+RW; DVD=RW (must be recorded using video mode orVH)', DVD-R (must be recorded using video mode orVH and mus_be finalized). ¢Ds (Audio ¢Ds, ODOR, ¢D-RW) -Audio CDs contain musicalor sound content only.rap3 discsare CDs (CDoR or CDoP,W) thor contain rap3 files.Thisproduct also playsCDs that contain JPEGfilesand HuNisessionCDs. Video ¢D O/¢D) and Super Video ¢D ($-VCD) discs - Like DVD video discs,VCDs contain picture and sound content.The difference issheamount of information thac canbe stored on the disc,VCDs typically havelower picture and sound quality than DVD discs,SuperVideo CDs (S°VCDs) can be usedto record up _o 70 minutes of digital soundand video, wizh HPEGo:Zs_andardvideo and HPEG-I s_andardaudie---bu_you must use DVD+R or DVD+RW discsto record on your DVD/VCR nor S-VCDs.Addizionally, SoVCDdisc compatibility is dependenton which HPEG coding software, disc designsoftware, and discwriter software are used',and the discs_hemselves, Things to co_sid÷r before yo_ co_ect Pro_ec_ components fr_r_ overhea_in_ Don'_ block ventilation holes on arty of the components.Arrange the components so that air cancirculate freely. Don'_ stack components. When you place components in a stan& makesure you allow adequateventilation. If you connect an audio receiver or amplifienplace i_on the top shelf. P_si_ion ¢_b[_s properly _o avoid_udio interference Insert eachcable firmly into _hedesignatedjack. If you place components above the TV,rouEeall cablesdown the side of Eheback of the TV insteadof s_raigh_down Ehemiddle of the back of the TV_ If your TV hasan antenna_hat uses300oohmtwin leadcables,do no_coil the cables.Also,keep _he_win leadcablesawayfrom audio/video cables. Con_ect4on Pictures Audio/video cablesare usually bundled together. For better visibility,the connection pictures in this book show eachcable separately (audio left, audio right, and video). Graphics containedwithin this publication are for represenr4tion onl4 U_pack the Box Your DVD/VCR camewith the following items: :@L Remote ¢or_tro[ and batteries (p_rt Bumber 26 [ 387) set of audio video c_bles (p_rt _u_ber _33086) RF C@gxial c_ble(p_rt number 2g [396) P_wer cord (part _urnber _8_04) Graphics contained within chis publication are for representation onJy.

are several ways to connect

your DVD/VCR, Please use the following chart to determine which connection is best for you,Turn to the appropriate page for specific instructions, TV TV TV Satellite Receiver Cables Heeded OeOe • Coaxial • Audio/video • S-Video Coaxial Audio/video S-Video ,, Coaxial ,' Audio/video • S-Video YV YV + satellite receiver po8 p01e po12 Connecting an opt;ionai audio receiver: Aft:or yell connect the DVD/VCR to your YV (choose an option abeve)_ ge te page 14 for generaH information about; connecting an audio/video receivero Graphics contained within this publication are for representation only 3

Explanation of mnput jacks

and Cables This section describesthe jacksarid cablesyou can usetomakeconnections (only a coaxial cableand a set of audio/video cablesare packedwith your DVD/VCR--you can purchase other cablesby calling 1-800-338-0376,order onfne at s_*w.rca,com, or go to your local electronics store),There are several 'waysto connect your DVD/VCR to your TV dependingupon the cablesyou haveand the jacksthat are on the back of your TV. Different jacksand cablesprovide a different levelof performance, It's important to remember, we're r_lking about degrees of picture improvement for comparison. If your TV hasComponent iacks (Y,Pb,Pr),S-VIDEO,and composite video (often color-coded yellow and grouped with Audio Left and Rightjacksthat arewhite and red); Component (Y,Pb,Pr),would be considered excellent, S-Video would be very good, and the composite video jack (yellow) would be considered good, yPI P_ Component Video (Y_ Pb, Pr) Jacks and Cables TheY, Pb,Priacks provide optimum picture quality becausethe video is separatedinto three signals (two signalsare dedicatedto the color portion of the image,and the other signalisdedicated to the black and white part of the image). To ensure maximum picture quafty, usethree video-gradecables(no_ supplied)for the connection. You can purchasebundled component video cables(not supplied) that are color-coded to match the Y,Pb,Pr jacks (red,green, and blue),ComponentVideo Input iacksare usually found on high-endTVs, such as HDTVs; multimedia monitors; and some of the"flat" LCD and PlasmaTVs or monitors, Notes; Also, remember to connect the left and right audio cablesbecause the Y, Pb, Pr jacks and cables carry on_ythe picture signal, not the sound, Nse the ComponentVideo connection (¥, Pb, Pr) for DVD playback a_d watching TV.Yo_must a_soco_ect yelow video came or S-Video for VCRp_aybad_i_ analog mode, S-WDEO $=Vi_eo jacks a_ Cables The S-Video (separatevideo) jack provides better picture quality than a composite video jack (sometimes labeledVIDEO and color

Back of the DVDiVCR

The back of your recorder might look a little overwhelming at first,This section explainswhat goes where and why.There are two sets of jackson the back of your DVD/ VCR--INPUT jacksand OUTPUT jacks, Eachjack is explained individuallybelow',but the basicidea is about sendingand receiving information to be playedon or through your DVD/VCR and displayingthat information on your TV screen, iNPUT The cablesconnected to INPUT jacks bring the signalthat carries the content INTO the DVD/VCR, such as the cable signal(programming) from the cable company or satellite programming from a satellite receiver. OUTPUT The cablesconnected to the OUTPUT jacksare sendingthe signalfrom the DVD/VCR OUTTO your TV so you can seeit on the screen,Thecorrect cables must be connected to the DVD/VCP.'sOutput jacksand the corresponding Input Jacl

These jacksseedthe content (audio and video) flora your DVD/VCR OUT to the TV so you can seeit on the TV screenand hear it through the TV's speakers.

VIDEO: Color coded yellow, the video cableyou usewith this jack provides better quality than an RFCoaxial cable but isn't asgood as S-Video. AUB|O L (_ef_): Color coded white, connect corresponding audio cable to TV'sAudio Left Input Jack, AUDIO R (right): Color coded red,connect corresponding audio cable toTV's Audio Right Input lack. ¢OHPON_T VJBEO OUTPUT (% Pb_ P_) - BVD PLAYBACK O_LY: Somehigh-endTVs and monitors haveComponentVideo input jacks.Thecablesthat send the video signalthrough these Output lacks provide the highest resolution becausethe video signalis divided into ] separate parts (cablesnot suppliedwith DVD/VCR),As withVlDEO and SoVIDEO,CONPONENTVIDEO (Y,Pb,Pr) only carries the picture signalso you need to connect the audio cablesso you'll hear the sound. If your TV has COHPONENT INPUT jacks,usethree video grade cablesto connect _he DVDNCR to thesejacks on the TV to get the best picture quality.However, makesure you also connect another video cable (either a RFcoaxial cable to the CABLE/ANTENNA OUTPUT jack;the yellow cable to theVlDEO Output bck; or an SoVideocable to the SoVlDEOOUT jack) becauseyou can only use ComponentVideo for DVD Playback.You'llneed to haveanotherVideo Output connected for playbackof VCR tapes, D|G|TAL AUDIO OPTICAL OUT - DVD PLAYBACK ONLY: If you havea Dolby Digital or DTS receiver or decoder with a DigitalAudio Optical input bck, you canachieveenhancedsound quality during DVD PLAYBACKby connecting a digital optical cable (not supplied), Note: _ake sure you connect regn_araudio cables in addition to connecting a Digital Audio cable because you can on_yuse the D_G_TALAUD_Oconnection for DVD Playback. Jf you're pJayinga VCRtape in analog mode (necessary for recording to DVD disc and p_ayinga tape at the same time) you'll need the other audio cables connected because the sound from the D_G_TALAUDIOwon't match up with the video in analog mode causing a "a ffp sync" problem. P_OG. SCAN switch - if you've connected your DVD/VCR to aTV thac usesprogressive scanningto displaythe imageviathe_ Pb,Pr bcks, turn the switch to the "on" position for progressivescan playbackof DVD discs,Typically,only some High Definition Televisionsand high-end mukimedia monitors use progressivescanning.Leavethe switch in the OFFposition for S-VIDEO or reguJarVlDEO(yellow') connections. Note: Jf you tern the P_0G SCANswitch on, and your TV isn't capable of progressive scanning you won't see a dear picture on the TVscreen.Additionally, when ptayingDVDsyou won't see any pkture--press STOP(the main menu appears) and turn the PROGSCANswitch to the OFFposition.Try ptayingthe disc again. A¢-_N -This iswhere you attach the power cord. Graphics contained within this publication are for representation only.

COPY - Shortcut to transfer tapes (VCR) to disc (DVD), which is great for converting your camcorder

recordings that are on videocassette tape to a DVD disc,When you have a recordable DVD+R or DVD+RW disc in the DVD disc tray and a videocassette tape in theVCR, press COPY (theVCR starts playingand the DVD/VCR starts recording automatically). $TAND_Y/O_ -Turns the DVD/VCR on and off, V¢_ B_t_ons _ECO_D - Records to a videocassette tape, STOP/EJECT -When playinga tape, stops playback,When tape isn't playing,ejects the tape. _EV - Rewindsthe tape FWD - Fast forwards the tape PLAY/PAUSE - Starts pbybacl<, During playback, pauses playback, I_PUT -Just like a TV hasVideo Input Channels(page 16),the DVD/VCR hasoneVideo Input Channelfor eachset of INPUT jacks,TheVideo Input Channelis the "channeF'to which you tune the DVD/VCR so you can seethe picture and hear the sound that%coming from the component that isconnected to the DVD/VCR's INPUT jacks.For exampie_if you connected your camcorder to the Audio andVideo Input jacks on the front of the DVD/VDR, you *wouldpressthe INPUT button until INPUT2- Frontappears, _V_ _ttons ¢_°/SI(|P- (cha_el _ew_/skip reverse) - Goes to the previous channel in the channel list when you're watchingTV.When playinga disc,goes to the beginning of the current chapter or track unless you're within the first minute of a chapter or the first IS seconds of a track--then, you'll skip to the beginning of the preceding chapter or track_ CH÷/SKIP÷ (channel up/skip forward) - Goes to the next channel in the channel list when you're watchingTV.When playinga disc,goes to the beginning of the next title, chapter,or track on a disc (in effect,"skipping" the title, chapter,or track). OPEN/CLOSE - Opens and closesthe disc tray, _E¢O_D - Records content to a DVD disc (DVD+R or DVD+RW discsonly). STOP - Stops playback and/or recording. _EV (reverse) - Searchesbackwards through the disc. FWD (forward) - Searchesforwards through a disc. PLAY/PAUSE - Starts playbackof a disc. Pausesrecording or playback. Fron_ lnp_ Jacks: _NPUT _.: Audio/Vi_eo jacks -These Input Jacksare provided for conveniencewhen you are connecting a temporary component, such as a camcorden S-VIDEO - If a component youYeconnecting,such asa camcorder,hasan S-Video Output jack connect it to this jack for picture quality that is better than regular video (yellow), Remember,you still haveto connect audio cablesto hear sound. Graphics contained within this publication are for representation only 7

OI = antenna

® O_T DVD/VC_ i TV CABLE!ANTENNA The back of yo_ TV might look diffe_'_ than _:be one pic_:ured here. Deeaib; _bo_l_ the diffe_e_ kinds of ¢ab_e_ _ed 1_oco_e¢_: your DV_/V¢_ _e on page 4_ 3=0wa_:¢h one prog_a_ while yo_ record another: TunetheTV to itsInput I channelorVid I channel Tunethe DVD/VCR to the channelyou want to record, and press RECORD, Use the buttons on the TV (or the TV_sremote control ¢) to tune the TV to the channel you want to watch, To play a _isc er ¢ape: TunetheTV to its Input I channelorVid I channel, If yo_ need help finding your TV's various Video Input Cban_els, go to page 18. _:_The remote control packed with your DVD/VC_ is capable of being programmed to operate many brands a_d models of TVs and VCRs. _or i_structions, go to page 2 I. If the remote operates your TV, press TV and INPUT to access the Video Input Channel Graphics contained within this publication are for representation onJy.

Connect the signaJ(cabJeor antenna):

Note: Depending upon howyou currently have your TVconnected,you'll haveto disconnect the came from yourTV'sAntenna Input iack (sometimes tabe_edCABLE/ANTENNA)or your VCR's Input iad_ before you connect the cable as explained below. Cable service." If you havecable service viaa cablethat comes out of the wall,connect the end of that cableto the CABLE/ANTENNA INPUT jack on the DVD/VCR. Note: If you havea cable box, go to page l0 for comlectioninstructions. Off-airant:enna: If you usean off=air antennato getTV prograrnrning,connect the antenna'sRF coaxial cable to the CABLE/ANTENNA INPUT jack on the DVD/VCR. 2. Connect the DVD/VCR 1:o the TV You need to connect cablesfrom the DVD/VCR's OUTPUT jacksto the TV's INPUT jacksin order to seethe content horn the D'v'D/VCR. Use the RFCoaxial cable that was packedwith your DVD/VCR, and connect one end to the CABLE/ANTENNA OUTPUT jack on the DVD/VCR. Connect the other end to the Cable/ Antenna Input iacl

[f you have questionsaboutusing a cablebox withtie DVDIVCI,consultyourcame company.IDA canonlyprovidegeneral

instructions becausecame services and cableboxesdiffer invariousareas.This connectiono_[yshowsa basicIF CoaxialCaMe co_ectio_,},ourcab{ebox may haveAudioVideoor S-Videoiacks. If you connect your components as described,you must accessdifferentVideo Input Channels on your TV to see programming.If you don't know how to aceessVideoInput Channels on your TV,go to page 18 for heIp,A general explanation, basedon the connection shown above,follows: To watch one pro_ra_ whNe TunetheTV to its Input I channelorVid I channel. Tunethe DVDNCR to the cable box channel(usuallychannel 2, 3,or 4), Use the channel buttons on the cable box to tune to the channelyou want to record. Pressthe RECORD button on the DVD/VCR, Use the buttons on theTV (or theTV's remote control _)to tune theTV to the channelyou 'want to watch. To play a _isc o_ tape: TunetheTV to its Input I channelorVid I channel. Ifyou _eed helpD_di_gyour TV'svariousVideoI_putChar_eis, go topage Ig. *The remotecontrolpackedwithyour DVDIVCRiscapableofbeingprogrammed tooperatema_y bra_dsa_d modelsofTVs.Fori_structio_s, go topage 21,Ifthe remoteoperatesyourTV,pressTV a_d INPUTto accesstheVideoI_putCha_eL O Graphics contained within this publication are for representation only.

cable box signal

Note: tefore you connect the DVD/VCl,you'! need to tisconnect some of the cables first in order to reconnectthem. i b. Connect the RFCoaxial cable that isconnected to the cable box'sOutput jack (sometimes labeledCABLE OUT) to the CABLE/ANTENNA INPUT jack on the back of the DVD/VCR, 2+ Connect the DVD/VCR to the TV You need to connect cablesfrom the DVD/VCRg OUTPUT jacksto theTV's INPUT jacksin order to seethe content from the DVD/VCR (whether ifs aTV program or a disc you% pbying), 2a. Use the RFCoaxial cable that was packed with your DVD/VCR, and connect one end to the CABLE/ANTENNA OUTPUT jack on the DVD/VCR. Connect the other end to the Cable/Antenna Input jack on the back of your TV (sometimes labeled CABLE/ ANTENNA). If you want m be able to record oneTV program while you watch a different program,you need _o connect the audio/video cables (provided) in addition to connecting the RFCoaxial cable described in Step 2a. 2b. Connect the audio cables. A set of audio/video cableswas packedwith your DVD/VCR. Connect the audio cablesto the OUTPUTAUDIO L (left - white) and R(right - red) jackson the back of your DVD/VCR, and to the corresponding Audio Input jacks on your TV (sometimes labeledAUDIO IN L and R). 2e. Connect the video cable.The cablesyou usefor the video determine the quality of the picture you'll seeon your TV when you% playingDVDs. For more information about cablesand signalquality,go to page4, Connect the video cable (yellow) to the OUTPUTVIDEO jack on the back of your DVD/VCR,and to theVideo Input iack on yourTV (sometimes labeledVIDEO IN), 2d. S-VIDEO If your TV hasan S-VIDEO jacl<,connect one end of an S-Video cable (optional) to the S-VIDEO IN iack on the back of the TV and the other end to the S-VIDEO OUT jack on the back of the DVD/VCR. COMPONENT OUT ¥_ Pb_ Pr (not shown) if yourTV hasComponent Input Jacl

TunetheTV to its Input I channel orVid I channeJ

Tunethe DVD/VCR _o the INPUT I channel(press the iNPUT bu[ton on _heremote). Tune_he satellite receiver to the channelyou w_nt _o watch. T_ w_:¢h TV (s_eHi_e pro_rmmmim_) wi_h _he DVD/VC_ _rmed off: "Fdnethe TV to its CABLE/ANTENNA iNPUT channeJ(usu_Hy@anne}2, 3, or 4). Tune_he sateJJitereceiver to the channelyou w_nt _o watch. T_ pJ_y _ disc or _pe: :F_netheTV to Input I channel orVid I channel, _ Graphics contained within this publication are for representation onJy.

cables are usually

color-coded _d_ white_ and yellow. Red = r+gh_ audio; White = melt audio_ Y_IIow = video. Connection: DVDiVCR + TV + Satellite Receiver The foJJowinginstructions enableyou to record the programs from your satellite receiver. Becausethe _ _uration and labelsvar4I on different satellite receivers and televisions,the steps provided are _ guidelines.ConsuJtyour SateJJJteReceiver and/or Television User's Guides for additional information. If you havecableTV serviceAND satellite TV]you canconnect the cable signalto the DVD/ VCR's CABLE/ANTENNA INPUT jack. J. SateHit:e signah Leavethe cable in place that comes from the satellite dish and goesto the satellite receiver, 2,. Connect the satellite receiver to the DVD/VCR 2a. Connect a coaxial cable to the satellite receiver's OUT TO TV jack,and to the CABLE/ANTENNA INPUT jack on the DVD/VCR. 2b. Connect audio cabJes(red and white) to the satellite receivedsoutput jacks[sometimes labeledAudio Left (white) andAudio Right (red)], Connect the other endsof these cablesto the corresponding INPUT AUDIO L andAUDIO R jackson the back of the DVD/VCR. 2c. Connect the video cabJe(yellow) to theVideo Output jack on the satellite receiver (sometimes labeledVIDEO) to the INPUT VIDEO jack on the back of the DVD/VCR. If your sateJJitereceiver, hasan S-VIDEO OUT jaclqconnect an SoVideocable to that jack and to the SoVIDEOIN jack on the DVD/VCR for increasedpicture quality (not shown in connection diagram), 3. Connect the DVD/VCR to the TV You need to connect cables from the DVD/VCR's OUTPUT jacks to theTV's INPUT jacks in order to see tile content from the DVD/VCR (whether it's a satellite program or a disc you're playing). 3a. Connect an RFcoaxial cable to the DVD/VCR's CABLE/ANTENNA OUTPUT jack and to the TV'sAntenna Input jack (sometimes labeled CABLE/ANTENNA), 3b. Connect the audio cables. A set of audio/video cableswas packedwith your DVD/VCR. Connect the audio cablesto the OUTPUTAUDiO L (left - white) and R(right - red) iacl

Both Dolby Digital® and DTS® are audio formats usedto record 5. I=channelaudio signalsonto the digital track of film (while the film is beingmade). Both of these formats

provide up to six separatechannels:left, right, center,left rear,right rear,and common subwoofer,The discwill play 5, !ochannelsoundonly if you've connected a DTS or Dolby Digital receiver or decoder,and if the disc isencoded in the Dolby Digital or DTSformat. PleaseReadThisBefore Bsing the DIGITALAUDIOjack! Thisunit's digita_ audio output iack is designed for a connectionto a Bo_by BigRal or DTSrecdver or decoder. Older digital equipment may not be compatible with the Dolby Digital hitstream. Sucha connectioncan create a high level of noise that may be harmful to your ears, and could damage headphones or speakers, it b important to choosethe correct Digital Ootput setting in the System Options meno. For more information, go to page 51. AdditionaBy, the DiGiTALABDIO OBTconnection is for DVDplaybackonly. Hake sore yon connect aodio cables (white and red) for VCRplayback. Connecting your DVDiVCR to a_ audio/video receiver Y_u'B need te consult instructions tha_ came with yo_ audio video receive_ in order to commect it prope_y_ The information below provides general guidelinesfor the DVD/VCR'sAudio Output Jacks. For a basicconnection, connect the left and right audio cablesto your audio/video receiver and _o_he OUTPUT AUDIO L (left - white) and R (righ_- red) jackson the back of },our DVD/VCR. If you havea Dolby Digital or DTS receivecconnect an optical cable (SPDIF)_o the DIGITAL AUDIO OUT jack on the DVD/VCR and _he Digital Audio Input lack on the receiver (cables not suppibd with DVD/VCR).You must also adjust _he D_'#_e_ Ou_pu_ setting (go _o page51 for information). Rote: Removethe protecdve cover that's in the DIGITALABDIO OUTOPTICAL}ack before connectingthe cable, Hanut_c_,ured under Icense flora E)ob XLaboratories "E)olbr" anti t_e cloub{e D s' mbol are nademarl, s of E)obr Laboratories C:onficlentia unpublis led wori

Is Removethe battery compartment cover on the back of the remote.

2. insert new batteries, Hatch the polarities (+ and -) on the batteries with the diagram on the remote, 3. Put the battery compartment cover back on the remote. lmpor1:ant Ba1:tery Informal:ion if you're not going 1:o use 1:he remo1:e for a mon1:h or more_ be sure 1:o remove 1:he hal:reties because they can leak an_ cause _ma_e, * Dispose of b_;_eries in1:heproper manner, according 1:ofederal,s1:a1:e, and localregu|a1:ions. , Anyba1:1:erymay_eake_ec1:roly1:eifmixedwi1:h adifferen1:ba1:1:ery1:ype_if inse_edin¢orren1:ly, ifa_Iba_1:eries areno1:rep_ateda1:1:hesame1:ime_if disposed of infire_or ifan a_emp1: ismade I:ocharge a ba%1:ery no1:in1:ended1:obe recharged. * Discard leaky ba1:1:eries immedia1:ely, Leaking ba1:1:eries can cause skin burns or o1:her persona_ injury, Poin% _he Remo_:e in _he Right: Direct:ion and P_ i_: in DVD/V¢_ Hode Wben you want the remote to operate the DVD/VCR, point the remote _t the DVD/VCR, not the TV.The remote hasto be pointed in tbe correct direction and toward the correct component in order for the remote control's signalto communicate with the sensor on the component. Hake sure there is a clear path between the remote control and the component you want to operate, so the signalisn't blocked. Hake sure the remote is in DVD/VCR mode--press the DVD/VCR button, Turn on _he TV _d DVDiVCR Is Turn on the DVD/VCg--press the DVDNCR button on the remote. 2. Turn on the TV and tune it to the correctVideo Input Channel--if you havean RCA, GE,or ProscanTV, pressthe TV button on the remote (if the TV doesn't turn on, pressthe ON.OFF button) and then pressthe INPUT button on the remote until you get to theVideo Input Channelthat matches how the DVD/VCR is connected to the T\{ If you haveanother brand of TViturn on the TV and tune the TV to the correct Video Input Channel (if you don't Imow how to accessthe Video Input Channelon your TV,go to page 18for help). Note:Youcan programyourremotetooperatemost brandsofremotecontrollable TVs.instructions areon page2 i. L@_ o ft_pa' butto_ DoII/,I OtTOIi// -- button O_-OFF SAT A_X O ZO_ ANALO_ _PE_ A_ Up afro',,','bt,JttOl Ri,_l_tarrow button _"OKbutton Comple_ce _he interactive Setup The next few pagesstepyou through the seriesof screensthat will appear the first time you turn on your DVD/VCR, Use the remote control to follow the omscreen instructions,The arrow buttons move the on-screen highlight in the corresponding directions on the screen (up,down, left, right), Pressthe OK button to seJecta highlighted item, Notes: You can accessthesetupscreens from themain menu.ifyou move,geta different program providerforTVshows,or changeyourconnections, you'llneed to completethe interactive Setup again. if you don't seethe Languageselection screen (below) the first time you turn on the DVD/VCR, make sureyou'vetunedyourTV to theVideoinputChannelthatcorrespondstotheway you've connectedtheTV tothe DVD/VCR.if you need he_p,go topage 18. Use the aF_ow buttons on the re_o%e to move %h_ou_h on=screen menus and highlight different optio_, Press the OK bu_ton to select a menu item Ichor:is highli_hted_ I) Selec* on-screen men_ ian_:_a_e Hake sure the remote is in DVD/VCR mode (press the DVD/VCR button), If you want the on- screen menusto appear in English,pressthe OK button on the remote control, If you prefer another language,pressthe arrow' down button until that languageis highlighted.PressOK to seJectthe language.Next, the connection screen appears, Note: if you don't see the Languageselection screen the first time you t_rn on the DVD/VC_, make sureyou'vetunedyourTVto theVideoinputCbanne}thatcorrespondstotheway you've connectedtheTV tothe DVD/VCR.ifyou need he_p,go topage 18. Graphics contained within chis publication are for representation only, _

Completing this information lets the DVD/VCR know what program signalsare beingsent to it.

Choose the type of signalthat isconnected to the CABLE/ANTENNA INPUT jack.Press the right arrow button to accessthe choices: Here: If you've connecteda cable box or satellite receiver to the CABLEfAHTE_A I_PUT ]ack, torn on the came box or satellite receiver before completingthis step, Co_le-An_enn_ (cableservice) Antenno Only (no cable service,just off-air antenna) _ote: If the DVDIVCBdoesn't start searching for channels after you've selected the type of signa_connectedto the CA_LE/AHTE_A I_PUT iack, pressthe down arrow botton to highlight Done and press OK. 3) Chan_el Search The DVD/VCR automatically scansthe signalcoming through the cable connected to the CABLE/ ANTENNA INPUT jack and prepares the channel list.The channel list determines what channels appear when you pressthe CH+ and CH- buttons. A progressindicator appearson the TV screen.When the Channel Searchreaches lOB%,press OK (the Channel List appears).If the Channel List doesn't appear,check the CABLE/ANTENNA INPUT iack to makesure the cable is connected properly. _ote: If yoo are osing on_ya came box or satellite receiver, there wi_ be few, if any,channels in the channel list. Chan_el Lis_: The Channel List containsthe channelsyou tune to when you pressthe CH+ and CH= (channel up and channeldown) buttons on the remote control. From the Channel Lis; screen,you can delete channelsyou rarely watch.You'Hstill be ableto tune to the "deJe;ed"channelsdirectly by usingthe number buttons on the remote control, but the DVD/VCR won't tune to a channelyou delete when you pressthe CH+/CH= buttons on the remote control. Pressthe down arrow button to scrol! through the channels.A checkmark in the box next to the channel meansit hasbeen stored in the channel list.Highlight the channeland pressOK to check or uncheckthe box.You can also label channelsby pressingthe INFO button. To skip editing the channel list,pressthe right arrow button. 5) Time Ze_e Use the down arrow button to highlightyour time zone,and pressOK (the Daylight SavingsTime screenappears). 6) Dayli_h_ Savi_s Ti_e If you live an atea that recognizes Daylight SavingsTime,pressOK (the DVD/VCR's internal clock will automatically advancethe time by I hour in the spring and set the clock back by I hour in the f_ll). If you live in an areathat doesn't useDaylight SavingsTime, pressthe right arrow button to highlight No,and press OK, _ Graphics contained within chis publication are for representation only.

_ ___ ................%_

7) Time and Date Your DVD/VCR hasan automatic clock, but it maytake awhile for the DVD/VCR to find the correct channel for the dock.Therefore, you might want to set up the clock manuallyhere. Use the number buttons on the remote to enter Yeor,Date, and Time.Tochangethe AM/PM setting when you're entering theTime, pressthe right arrow button, Notes: If this screen doesn't appear, you can set the time later from the main menu--with the remote in DVD/VCRmode, pressMENU,select Setup,select Installation, select Clock Setup and foffow the on-screen instructions. The DYD/VCRis equipped with a dod_ that automaticaffy keeps the time accurate. If you have any problem with the time being accurate, simply turn off the AutoCJockoption (page 53). Accessthe main menu, choose System Options, and then Auto(:Jock. FoWIowthe instructions to disable it, and set the time manuaffy using the ClockSetup menu option that you access via the Setup/Installation menu. Watch TV When the set-up procedure iscomplete, the mainmenu appearswith the WatchTVmenu highlighted, To watchTV, just pressthe OK button on the remote, What to E×pece T_rn on the DVD/VCR _e Wa¢ch TV In order to usethe features of the DVD/VCR, you'll haveto get usedto turning on your DVD/VCR to 'watchT_A Youalso need to tune theTV to theVideo Input Channel--instead of changingchannelswith theTV's channel up and channeldown buttons, you changechannelsvia the DVD/VCR's channel up and down buttons (or number butmns).The TV stayson theVideo Input Channelthat corresponds to the Input Jackson theTV you usedto connect theTV to the DVD/VCR, If you need helpfinding theTV'sVideo Input Channel,go to page 18. The Hai_ _er_ Appears The main menu appearswhenever you turn on the DVDIVCR,To watch TV_pressthe OK button when the WatchTVmenu is highlighted.When you chan_echannels,the channelbanner appearsto give you programming information that isavailable(for more information, go to page28), Cha_ging ¢ha_e_s You might notice a slight delaywhen you're changingchannelsbecausethe signalgoesto the DVD/VCR and isthen sent out to the T_A Discs t_or Recording Recording to DVD discsis new to manypeople,There are severaldifferent formats of DVD discs.For your DVD/VCR, only DVD+R 2,4x,4x, or 8x and DVD+RW 2.4x and 4x type discscan be usedfor recording.A DVD+RW disc is"rewritable" which meansyou can usethe discover and over again(similar to how you useVCR tapesto record),Additionall}; DVD+RW discshavemany"digital features" for editing the disc'scontent. DVD+R discscanonly be usedone time--you can'_record over existing programs and you must get usedto"finalizing the disc" in order for other DVD playersto be ableto play DVD+R discs.Throughout this User's Guide,you'll notice that somefeatures and menu options are only availablefor a specific type of disc. Hake sure you use discsfrom a reputable manufacturen Manyproblems encountered when recording (or playing)discsare related to the wide variation in discquality due to the large number of brandsand manufacturers,If you encounter problems with one brand of disc,pleasetry another brand. VCA (Digital vs. Analog) YourVCR is equipped with two modes:digital and analog,Thedigital mode (or path) enablesyou to use an on=screenInfoDisplay during playback,ThisDVD/VCR isalso designedwith an analog mode (or path) so you areable to record to a DVD disc while watching aVCR tape;or record to aVDR tape while watching a DVD disc.The DVD functions alwaysgo through the digital path,There isonly one digital path,Therefore, if you are using anyVCR functions at the sametime you're using DVD functions,the DVDNCR switches to the analogpath, If you are playingaVDR tape and the DVD functions aren't in use,you can switch theVDR playback between the analogpath and the digital path by pressingthe ANALOG.DIGITAL button on the remote. Note:The DVD!VCRwill change to the analogVCR path automatically when needed.When the VCR is in analog mode, the on-screen InfoDisplay isn't avaffab_eand the VCRmenu systemwiff _ookdifferent than the menus represented in this _ser's _uide. Smote Play Your DVD/VCR is an integrated product,The DVD/VCR intuitively knows whether"aVCR tape or a DVD disc has been loaded,and acts accordingly when you pressthe PLAY button on the remote. If you haveboth aVDR tape and a DVD disc in the DVD/VDR, the main menu appearsand you must select the appropriate media(tape or disc) by highlightingthe appropriate menu (Tapeor Disc)so the DVD/VCR knows what to do, Graphics contained within _his publication are for representation only _ 7'

In order to see what's pbying on your DVD/VCR, you need to tune theTV to theVideo Input Channelthat corresponds to the Input Jackson your TV that you usedto

connect the DVD/VCR to theTVTheVideo input Channel(s) varies for different brands and different models of TVs. P,CA_ GE_ and Proscan TVs If ),our brand of TV is RCA, GE,or Proscan,the remote control packedwith your DVD/VCR will most likely accesstheTWsVideo Input Channel--with the DVD/VCR turned on, pressthe TV button, and then pressINPUT until you seethe DVD/VCR's menu on your TV screen. Other Brands of TVs Sinceaccessto aTWsVideo Input Channelvaries from one manufacturer to the next, it's difficult to provide specific instructions for your particular brand, However,a list of suggestionsis provided below. Consult the Instruction lqanualthat camewith your TV If you can't find the information in the manual,or can't find the manual,review the following list, • There might be a button on the TV's remote control that accessestheVideo Input Channel (see table below for examples), • YOumight select theVideo Input Channelfl om the TWs menu system, • You might tune to it by pressinga specific channelnumber (see table below). • Pressthe Channel up and/or down buttons on theTV's remote control (sometimes theVideo Input Channelis stored in your TV's channellist). o_ the TV VIDEO SIGNAL VID I VID 2. B_tte_ e_ the TV remete VID I S-VlD LINE INPUT VID SOURCE VIDEO AUX Cha_eJ Number O0 93 90 91 92 VID I VID 2 INPUT _e×t Steps This chapter isdedicacedto connecting your DVD/VCR. Choose what you want 1:odo next, and go to the appropriate chapter for instructions, Chapter :_: The _e_ete Ce_reJ (page _9) A description of eachbutton is in Chapter 2.Additionally, the universalremote control canbe programmedto operate many brandsand types of components.Go to page 19 for instructions, Chapter 3: _ecor_i_g_ Ptayback & Features (page 27) This chapter tells you how to record and playbackprograms, how to use the Disc Library and special editing features,Instructions for copyingaVHS tape to a DVD disc are in this chapter. Chapter 4: PJayi_g Discs (page 37) If you're ready to pop in a DVD (or a CD), this chapter explains how different discsfunction in the DVD/VCR and describesthe featuresyou can usewith different types of discs, Chapter 5: The DVD/VCR's He_ Sys_e_ (page 46) Sincethis product is muitiofunctionaJ,there are many on=screenmenusto control settingsand accessfeatures.Chapter S describesthe menusand why you would want to usethem. Chapter €: Ad_i_ie_a_ |_formatie_ (page 54) If you're havingtrouble, go to Chapter 6, It includes troubleshooting information, the product's warranty, and accessoriesyou might want to purchase. _ Graphics contaMed within this publication are for representation only.

Graphicscontained within this User_ Guide are for representationoniy_Some

of the menu screens,buttons, and display messagesmight be different in your product than they appear in this book. [he on-screenhelp text provides the most current operational information_ 19

You can usethis remote to operate _he DVD/VCR, and to accessthe featuresavailable.The remote

is also designedto operate most RCA, GE,and Proscan components (TVs,VCRs,DVD pbyers,audio components and satellite receivers),If you haveanother brand,you can program the remote control to operate _hosecomponents (go _o page 19for instructions), The descriptions that follow describe how each button works when operating the DVD/VCR. Hany bu_ons will perform differen_functions dependingupon the type of disc and menu functions of the disc, 0-9 (Number b_eon$) Use the number buttons _o input information suchas chapter numbers,track numbers,to make selectionson some menu screens,and/or to changechannels. A_w bu_to_ (up_ d_w_ [ef_ _igh_:) Usethe arrow bu_ons to highligh_options that appear on the screen (_hearrow buttons move the highligh_in the corresponding directions--up arrow movesthe highlight up'_left arrow moves_he highlightJeft_e_c,), ADVANCE Vv'henplayinga disc or tape_movesforward approximately 30 seconds,No_ applicablefor VCDs or mp3 files, AGAIN Accessesthe SceneAgainTMfeature--repl@,s the last severalseconds(approximately 10)of the DVD disc or r_peyou're pbying. Not applicableforVCDs or rap3files. ANALOG'DIG|TAL Switchesthe VCR from the digital path (InfoDispby available)to the analogpath (rio InfoDisplay arid different menu system), ANGLE Accessesvarious cameraanglesthat might havebeenadded to a pre-recorded disc when it was created. Not availableon all discs, ANTENNA Acts like aTV/VCR button that is on mostVCRs--on your DVD/VCR switches the RF Output between _heTV/cable signaland _he DVD/VCR output, A_DiO Pu_sthe remote in audio mode to operate a component_such asan audio receiver or amplifier,that you've programmed to work with this button, A_X Pu_sthe remote in auxiliary mode to operate a componen_(suchas a cable box,VCR, DVD player,satellite receiver_or audio receiver) that you've programmed to work with this button. CABLE Putsthe remo_e in cablebox mode so the remote operates a cable box tha: you've programmed to work with this button, CN+ Advances to the new chapter or track when you're playingdiscs.Goes to the next channel in the channel list when watching T\,: CH = When _layinga disc_g_est_ the beginning_f the current cha_ter _r track_un_essy_u_rewithin the first minute of a chapter or the first 15secondsof a track--then you'll skip to the beginningof the preceding chapter or track.When watching TV_goesto the previous channel in the channelslist. CLEAR During playback,removes on=screenmenusand dispbys, DVD/VCR "_drnson the DVD/VCR and puts the remote in DVD mode so it operates the DVD/VCR. FO_W'ARD Searchesforward @-oughthe disc or tape_ GO BACK Returns you to the previous menu.When watchingTV, goesback to the previous channel. iNFO Displaysthe on=screenInfo Display(for de_ailsabout the Info Displ@1go to page32,) iNPUT Accessesthe Input Jackson the Recorder (CABLE/ANTENNA INPUT,INPUT I, and INPUT 2 on the fron; of the DVD/VCR). LIVE When the Plain menu is on the screen,provides quick accessto watchT'_ _EN_ When you're not playinga disc,accesses_heDVD/VCR's menu.When you're playinga disc,accessesthe disc'smenu,if one isavailable, _TE Lowers the volume to i_.sminimum JeveLPressagainto restore volume. OPEN,CLOSE Opens and closes _hedisc tr_y, OK When a menu ison the sa een,selec;sthe highlighted item, ON,OFF Turns the DVD/VCR on and off. PA_SE Pausesdisc or _apeplay or recording. PLAY Beginsdisc or tape play. RECOI_D Records programming. REVE_S[[ Searchesbackward through a disc or tape. SAT Pu;sthe remote in Satellite mode in order for _he remote _o operate a satellite receiver,This remote iscapable of beingprogrammed to operate most brands of satellite receivers.This remote is alreadyprogrammed to operate most RCA, GE,and Proscanbrand satellite receivers, STOP Stops playbackor recording_ TIPIER.G_JDE Accessesthe list of Timer Recordings(the Timer List screen), TV Pu_sthe remo_e inTV mode in order for it ro operate your TV.This remote isalready programmed to operate RCA, GE,and Proscanbrand TVs.This remote is capableof being programmed to operate manybrands of TVs. VOL +/o Increasesand decreasesthe volume level.Is capableof operating your TV or audio receiver. Z@O_ Enlargesthe imageon the screen so you canzoom in on details.Topan and scan after you've zoomed in on an image_usethe arrow buttons,The Zoom feature isn't availableon all discs.Typica]ly_it works with DVD discsand CD=Rswith ]PEG files. _ Graphics contained within this publication are for representation onJy.

This remote control is designedto operate most RCA, GE,and ProscanTVs,

1. Pressthe TV button (if the TV turns on, this remote will operate your TV; if it doesn't turn on, go to step 2 below), 2. Pressthe ON.OFF button (if theTV turns on or off, this remote will operate theTV). 3. If that doesn't work, you cantry programmingthe remote by following the instructions below, Programming the remote to operate your TV There aretwo waysto program this remote control to operate other brands of TVs:Direct Entry andAutomatic Code Search(both methods are described below). Direct Entry 1. Turn on theTV, 2. Look up the brand and code number(s) from the list that starts on page23. 3. Pressand hold theTV button on the remote, 4. Keep holding down the TV button, and enter the first code from the code list for your brand (p,21), S. ReleasetheTV button. 6. Point the remote toward theTV and press the ON.OFF button to seeif the TV turns off, If it doesn't, pressthe TV button and then pressON.OFE if you get no response,follow steps 1-5 again,but enter the next code from the code list for your brand of television, 7. if you havetried all of the codes listedfor your brand and this remote still doesn't operate theTV, try the Automatic Code Searchmethod (next section), If Automatic Code Searchmethod doesn't find the correct code,this remote won't work with your TV and you'll haveto usethe remote that came with your TV. Note: Thisremote may not be compatible with al_ brands and models of televisions, Automatic Code Search TheAutomatic Code Searchmethod for the TV button tests allof the TV codes,If you want to stop the automatic code searchwithout programmingtheTV button to operate your TV,press CLEAR until the indicator on the remote turns off, 1. Turn on theTV: 2. Pressand hold the TV button,While you continue pressingthe TV button, pressand hold the ON.OFF button until the indicator light on the remote turns on--then releaseboth buttons. 3. Point the remote at the TV Pressand releasePLAY,then wait E secondsor until the indicatoron the remote stops flashing. At this point the remote issearchingfor the correct code to program (you'll know it'sfound the correct code when the TV turns off, go to step 4). If,after 5 seconds,the TV doesn't turn off, press PLAYagainto tell the remote to searchthe next set of codes. Continue pressingand releasingthe PLAYbutton (at 5 second intervals) or eachtime the indicator light stops blinking.When the indicator light turns off, and staysoff,the remote has searched allof the codes--which meansthis remote can't be programmed to operate your TV: You'll haveto usethe remote that camewith theTV. 4. When the TV turns off,the remote hasfound the proper code. Pressand releaseRE'v'ERSE,then wait 2 seconds.Repeat this step until the TV turns back ON. S. To finish,pressand hold STOPuntil the indicator on the remote turns off. Graphics contained wkchin this publication are for representa_:ion only _

This remote is alreadyprogrammed to operate most RCA, GE,and Proscancomponents--just

pressthe applicablecomponent button to operate the component (for a satellite receive_pressthe SATbutton', for an audio component, pressAUD!O, etc.), There aretwo waysto program this remote control to operate other brandsof sare/ite receivers,cable boxes,and/or other compatible components:Direct Entry and Automatic Code Search(both methods are described below), Direct: l!!ntry m. Turnon the component youwant to programthe DVD/VCRremote to operate (satellite receiver,VCR,etc,). 2. Lookupthe component,brand,and code number(s)from the list(pages23-26). 3. Pressand hold the appropriate component button on the remote (Le,SATfor satelite receiver;CABLEfor cabb box;or AUDIOfor an audiocomponent),TheAUX button cancontrol manydifferenttypes of components indudingVCRs,TVs,audiocomponents, sate/ite boxes,cableboxes,or DVDplayers.Youmust use the Direct Entrymethod to programthe AUXbutton unlessyou want to program itto operate aVCR(AutomaticCode Search for theAUXbutton onlyaccesses theVCR codes). 4. Keepholdingdownthe component button, and enter the first code from the code listfor your brand.Ifthe indicator lightflashes,you'veentered an invafdcode or the button isn'tprogrammable. _. Releasethe component button, 6. Pointtheremotetowardthe componentandpressthe ON*OFFbuttonto seeifit turnsoff,If it doesn't,pressthecomponentbuttonandthenpressON.OFEifyouget noresponse,followsteps14again,butenterthe nextcodefromthe codelist. Here:Thisremotemaynot be compatiMe withal brandsandmodelsof components. Au_:omatic Code Search TheAutomatic Code Searchmethod searchesa/of the codes for the default component of a specific component button, if you want to stop the automatic code search without programming the remot< pressCLEAR untt the indicator on the remote turns of[, Hote:You can only use Aitomatk Code Search f:o program the AUX button [f you want the button to operate a VCR--you mtst use Direct Eltry {above} [f you want to program the AUX button to operate other components. I. Turn on the component. 2. Pressand hold the component button (TV_SAT,CABLE, or AUD!O).While you continue pressingthe component button, pressand hold the ON.OFF until the indicator light on the remote toms on--then release both buttons. 3. Point the remote at the specific component you're programmingthe remote to operate (TV,satellite receiver,cable box,audio component, etc.). Pressand releasePLAY, then wait S secondsor until the indicator on the remote stops flashing. At this point the remote is searchingfor the correct code (you'l! know it'sfound the correct code when the component turns off, go to step 4).if, after Sseconds,the component doesn't turn off, pressPLAYagainto tell the remote to searchthe next set of codes, Continue pressingand releasingthe PLAYbutton (at S second intervals)or each time the indicator light stops blinking,When the indicator light turns off, and staysoff, the remote hassearched all of the codes--which meansthis remote can't be programmed to operate the particular brand/model of component,You'll haveto usethe remote that camewith the component, 4. When the component turns off, the remote hasfound the proper code,Press and releaseREVERSE,then wait 2 seconds.Repeatthis step until the component turns back ON. 5. Tofinish,pressand hold STOPuntil the indicator on the remote turns off. Using the remote's features Know _:he mode Once you've programmed the remote to operate other components, you need a basic understanding of how the remote control works.The codes in the remote control that make a component act a specific way are mode dependent--if you want to change setdngs in your TV's menu, you must press theTV button before you press the MENU button so the remote control knows that you want to access theTV's menu system, To summarize, to operate the DVD/VCR you must press the DVD/VCR button; to operate the TV,you must press the TV button; to operate a satellite receiver, you must press the SAT button; to operate the cable box, you must press the CABLE button; etc. To let you know which mode you're in,the component button that is activelights when you pressa button. Unders_:anding _:he _PUT bunt:on Another important button is the INPUT button.The INPUT button accesses the programming from a specific component.We call these channels,Video Input Channels, because you are telling the component to send the video (and audio) that corresponds to theVideo input iack you used to connect the component to the DVD/VCR, For exampl< ifyou cormected a satellite receiver to your DVD/VCR by using the S-VIDEO IN iack, you would need to press DVD/VCR (to tel the temote you want to operate the DVD/VCR) and then press INPUT until the S-Video Input Channel appears (if the satellite receiver is on, you'l! see the program it is tuned to, and S-VID appears in the DVDNCR's channel banner to let you know which "channel" the DVD/VCR hasaccessed. Low Bat_:ery lndica_o_ Whenthe batteriesarelow,the indicatorlightandthe componentbuttonlightflickers. _ Graphics contained within this publication are for representation only.

Bell & !towell

1170 11511 1005 104{ 1126 1059 If}It 1079 1002 1157 1007 1029 lioldstar 1047 1147 1!02 1144 104] 104_ l)umont 1005 jVC 10411 ltEC 1!06 1155 1044 1005 1006 10!1 1055 1004 1!26 1157 1045 Itroksonk 1004 1007 10!2 1007 1005 1143 1!]0 llSIl 1067 Electroband 1011 10!7 1007 1006 IIU 1003 10!l/ 1077 1174 1007 Portland Realistic 1060 Celebrity 1005 1029 1107 1007 Electrohome 1033 1077 lib 1010 1006 1045 1104 1003 1074 1019 1129 Nikko 1007 1170 1107 Centurion 1004 1075 101t9 INl9 1007 10S IB7 1130 1009 100_ 1007 1090 blajestk 1015 1095 Runco 1177 Citizen 1007 1000 1105 1002 Onwa Prke Club 10114 1147 1005 1010 10% 1177 blarantx 1026 1063 Sampo 1157 1007 1019 10% 1146 1005 1000 1020 Hallmark Kawasho 1007 Optimus Prima 1005 Sharp 1106 1!42 1007 1005 1015 Emerson 1005 1007 1076 1126 1007 1026 100_ 1007 1005 1070 Prism 1095 1045 1007 ttisense 1007 1049 Optonica 1012 10% 101! 1061 Proscan 1156 1022 106} 1011 1!4! Renwood blegatron 1097 10B 1095 1021 ttitachi 1005 1007 1000 Samsung 106! lifo 1072 1005 1007 1076 Orlon 1001 1005 1069 Colortyme 1023 1007 1011/ blemorex 1025 1!04 1006 1070 1005 1074 1011 I(Ioss 1007 1109 1!]0 1007 1071 1007 1025 1017 Rovabeam 1006 Panasonk 1!32 10!l 1077 1010 1026 10B 1026 1007 1004 1!57 10N 1095 ContedCo W 1027 1036 1040 1029 1032 1!50 10!ll 1097 1011 1029 10)7 1041 1045 1030 Proton 1067 1094 1005 1067 Signature 1012 104_ 1!07 1090 MliA 1121 1007 1064 1007 1017 1070 1!26 I(TV 1005 1120 10!l 1095 1077 1026 10% 1!34 1076 1006 1152 Quasar 10% Sony Craig 1101 1!35 1042 1007 1153 1114 1003 1026 1102 1!76 10% 1011t 1004 lI}} 1115 1109 1!77 If0! 1020 1072 1127 1127 1!70 1070 1042 lIB Graphics contained within this publica'tion are for representation only 23

Code List for TV button TV(continued) So_de_ig_ Toshiba VCR 1005 1029 1007 1043 AUX button 1000 I044 Admiram I026 I045 2069 1027 1063 Aiko Starlite 1067 2024 1026 1074 Aiwa Supre-Nacy 1075 2023 1070 1091 1092 Akai Sylvania 1145 2003 1005 1147 2004 1007 2005 1000 lotevision 2058 1010 10g 2059 1030 Universal 2060 1040 1031 A@iovox 1041 1054 20!1 1046 Wards tell & Howell 1047 1001 2000 I040 I002 1055 1005 troksonk 1073 1006 2009 1092 1007 2022 1154 1010 2083 Symphonk 1021 Calix 1024 1024 20!1 1026 1027 Canon 1107 1031 20!0 Tandy I038 2019 I097 1040 Capehart I041 2017 Tatung 1046 2057 1004 I047 Carve Technics 1054 2038 1032 1055 CCE Techwood I061 2024 1005 1076 2037 1007 1130 1032 1157 Citizen 2010 leknika Yamaha 20!1 I002 I005 2012 1005 1006 20!3 1006 1007 20!4 1007 1010 2015 1000 Zenith 20!6 1011 1002 2024 1012 1005 I013 I004 Colort#me 2006 1015 1005 1026 I006 Craig 1027 1117 20!0 1047 2011 1063 2020 1094 2037 1095 CurtisNathes 1121 2002 1120 lelecaption 1074 2006 2@ Kenwood 2041 Philips 206! 2010 2002 2006 2042 2018 2064 20!3 2010 2007 2060 2030 2067 2013 2010 2008 2065 2040 207! 20!0 2019 2013 Nontgomery 2066 2074 2019 206! 2015 Ward Pioneer 2075 202! 2064 2058 2069 2007 2070 206! 2074 2065 Notorola 2034 2007 2074 2007 RLN 2010 2043 2000 Daewoo 2000 2037 2069 2063 Realistic 2012 GoVideo Kodak NTC Portland 2000 2014 2073 2011 20!0 2013 2010 2016 2076 2018 bhltite& 2014 2011 2022 Goldstar LG 2010 2016 2012 2023 2006 2011 20!3 2057 2018 2024 2011 Logik 2023 Proscan 2019 2037 2015 2037 2032 2000 2020 Daytron 2033 2037 200! 2023 LXl 2025 2057 2036 2002 2011 NEC 2030 Dimensia @adiente 2006 2074 2002 2023 Nagnavox 2048 2018 2007 2007 2069 2074 Narman 2019 2000 2000 Elearohome Rardon 2038 20!3 Quasar Rkoh 2011 2006 2039 2015 2013 2072 2025 Narwood 2053 2050 2019 Runco Emerson 2037 2055 2065 2067 2053 2003 Nitachi 2066 Nikko Radio Shack Samsung 2009 2034 Narantz 20!1 2011 2003 20!1 2035 2006 Noblex 2040 2010 2012 2036 2007 20!0 2069 2012 2018 2054 2000 Olympus Radio 2020 202! 2050 2013 20!0 Sha&/Realgtk 2032 2000 2059 2022 2064 2015 Optimus 2010 2079 2023 JC Penney 2010 20!1 2083 2023 2006 2030 2069 20!1 2010 Sansui 2026 2007 Natsushita Optonka 2019 2007 2027 2000 2018 2040 2020 2009 2020 2047 2029 2010 Nemorex Pa_asonk 2023 2050 2040 2011 2000 20!0 2023 2065 2060 2010 2010 20!9 2030 San#o 2062 2019 2011 2056 2040 2000 2060 2031 2018 2067 Radix 7010 2070 2034 7020 Pentax 2011 7020 2023 2013 2000 2004 2035 2053 RCA Fisher 2037 2034 2069 2000 Scott 2008 2030 2035 200! 7009 2020 2054 NGA 2054 2002 2012 2030 Jensen 2025 2064 2003 2022 203! 7034 7040 Pe_tex 2010 7027 Fuji 2035 2060 Research 2010 2029 2004 2050 Ninolta 20!5 2034 2040 2013 JVC 2034 Phiko 2035 2062 2063 2006 2035 20!0 2044 201! Funai 2007 2054 20!9 2043 2010 2023 2000 Nitsubishi 2030 2046 2023 Garrard 2013 2025 2039 2054 2052 2023 2050 2034 GE 2065 2035 2000 7077 2040 24 Graphics contained within this publication are for representation only,

Code List VCR (continued) AU× button Sears 20 0 PVR 0080 DVD Paoasoni< 2008 2023 0090 3006 2011 2052 AIJXbutton 009! DYDbutton 3021 2010 Toshiba Tivo 0092 Aiwa 3050 2020 2012 2002 0093 3004 3057 0094 Apex Pbilips 2030 2030 Satellite ,cA 3oo7 2031 203[ 3002 2034 2034 SATbutton 0000 3008 3044 2035 2040 AIphastar 5001 3040 3046 2054 2060 0060 0006 3049 Pioneer Sharp Totevision Chaparral 0007 Broksonk 3022 2014 2010 5050 5080 3009 3023 2025 Nil 0051 0090 3050 Proscan 2040 IJnitech Dghnet 009! Daewoo 3001 2049 2010 0067 5092 3010 3062 2069 0093 Vector Drake 0094 Emerson Qwestar Shintom Research 0082 3011 3024 2004 2006 0053 fleMgtic 3012 !tCA 5057 3052 3001 2035 2007 Ecbostar Sony Fnnai 3025 2037 2012 5074 5062 3012 3026 2050 2013 Express Vu Star Choice 3041 Signature Video 5084 GE 2069 Concepts 0085 3001 3060 ginger 2006 GE SISI 3061 2010 2007 0000 3013 5058 3062 2037 2012 0001 3062 2072 2013 0000 STS3 GoVideo Samsnng Sony 2060 5090 5059 3040 3027 2004 Wards 0091 STS4 Nitacbl 3037 0092 0060 3014 Sansni 2000 2010 0093 Toshiba 3032 2051 Nil jvc 0094 006! Sanyo 2063 2012 3041 2006 2010 General 0063 I(enwood 3043 STS 2020 Instruments 0076 3015 Sharp 2010 2023 5084 5077 3020 2054 2020 0085 0078 I(onka 3047 Sylvania 2034 0056 0079 3005 2010 2035 Hitachi 0080 I(oss Sony 2019 2037 0070 0081 300! 30303029 2023 2040 007! 0082 Lasonk 3031 0003 3030 2030 2054 Hughes 3050 2039 2062 Network Unidea Nagnavox Sylvania 2040 2069 Systems 0073 3002 3012 2066 2071 0066 ttl)TVTuner 3016 3059 Symphonk XR=IOOO 0075 ItCA Memorex Toshiba 2023 2010 JVC 3000 3017 3033 2023 0069 blintek 3034 Tandy 2037 Panasonic 3018 3035 2000 Yamaha 0064 Nitsubishi 3036 Tashiko 2006 Pbilips 3003 Zenith 2011 2007 0072 NAD 3037 Tatung 2000 Primestar 3011 3040 2000 2015 0065 Norcent Teac 2050 Proscan 3019 2023 Zenith 0000 Onlcyo 2058 2004 000! 3020 Technics 2050 Oritron 2010 2053 3024 2006 2063 leknika 2072 20If 2001 I)Vl)/VCll l)Vl) button & AtlX button Broksonic DV_3050 VCR2003 Emerson DVD3052 VCR2084 GoVideo DVD3040 VCR2077 jvc DVD304t VC02077 NCA DVD3042 VCR2070 Sanyo DVD3043 VCR2070 Sony DVD3058 VCR2086 Zenith DVD3048 7¢0208! CableBox CABLEbutton ABC 0003 0004 0005 0007 0046 Archer 00!0 0011 Cableview 0000 Contec 0016 Eastern 0017 GE 0002 0003 0004 Gemini 00!0 00!7 !ieneral Instruments 0004 Namlin 0020 002! 5022 0077 5034 Nitachi 0004 jerrold 0004 0010 5023 0024 5040 0046 blagnavox 5025 Motorola 5047 0040 0049 blovie Time 5026 NEC 5006 NSC 0026 Oak 00!6 0020 Panasonk 5042 0045 Philips 5012 5013 5014 8015 8019 8028 5029 8030 803! Pioneer 5032 5033 Proscan 5002 8003 8004 !lCA 5002 5000 504I 8043 5045 !lealistic 8010 Samsung 5033 Sdentiflc Atlanta 8007 5035 5036 8037 Signature 8004 Sprucer 8048 Standard Component 8038 5039 Starcom 8018 8046 Stargate 8010 Tocom 5005 8023 United Cable 5046 Universal 8009 8010 801! View Star 5016 5025 8026 Zenith 8044 Graphics contained within this publication are for representation only 25

are foF representation

only.

DVD Recording (DVD+R and DVD + RW)

Disc Library DVD Playback VCR Recording VCR Playback Graphicscontained within this User_ Guideare for representation oniy_Some of the menu screens,buttons, and disp/ay messagesmight be different in your product than they appear in this book. [he on-screenhelp text provides the most current operational information. page 27

1. Turn on the T_,_arid tune the TV to the correctVideo Input Channel (this channel corresponds to the input jackson your TV that you usedto connect the DVD/VCR to

the TV), 2. Turn on the DVD/VCR (the DVD/VCR's mainmenu appears), 3. Sincethe WatchTVmenu is alreadyhighlighted,just pressthe OK button on the remote (the DVD/VCR tunes to the last station you watched and a channelbanner appears).Toseethe channel banner after it disappearsfrom the screen,press INFO on the remote control, Channel B_rmer The Channel Banner While watchingTV, press INFO on the remote control to seethe channelbannenThe information that appearsin the channelbanner depends upon the information sent from the broadcaster.For example, the rating, the program name,and the time the program ends are not alwayssent by the broadcaster. DVD Recording Fpacea,_aiiableo_ disc Note:Whe_yo_s¢opre¢ordi_g_¢he_VD/VCR¢a[_essevera_secends te save in_r_io_ to _he dis¢_ A $til _r_me o_ _he recordi_ m_y appear on the screen before you are re_rne_ _o TV viewing+ IHPORTANT: When you record to a DVD+R disc,you must finalize it before you can play it in another DVD player. Tofinalize the disc(select the Disc menu from main menu,then select the DiscTitleMenu.With the disc name highlighted,pressOK. SelectFinalizeDiscand press OK, Once the disc is finalized you won't be able to changethe name of the disc or the nameof the titles on the disc, After you load a DVD+R or DVD+RW disc into the DVD/VCR's disc tray;there are several waysto record programming.When you insert a blank DVD+R or DVD+RW disc,the DVD/VCR will need to format the disc so you mayneed to wait several seconds,Thequickest way to start recording isto pressthe RECORD button while you're watching a show' (the recording banner appears),Youdon't even needto remember to pressthe stop button if you usethe Express Recordingfeature in the recording banner (see next section), Heros: The DVDIVC! won't record copy=protectedmaterial The first time you load a DVD+[_or DVD+RWdisc, the DVD/VCIwtl format it. Remember, if you're using a DVD+_ disc you must finalze it if you want to play the disc in another DVD player (page 33), Express Recordi_ Fea_:ore Eachtime you pressthe RECORD button on the remote the recording time increasesby }0 minutes, up to the maximum limit (the status is listed on the far right side of the recording banner).The DVD/VCR wi/record for the amount of time you specified and then stop automatically,If you press INFO,the amount of recording time left appears.At anytime during the recording, you can extend the recording time by pressingthe RECORD button, If you only pressRECORD once,the recording wil not stop automatica/y--you wil need to pressthe STOPbutton to stop recording, Wat¢hi_ o_e cha_el whle yo_ record a_other cha_el If you want to watch another channelwhile you're recording,you needto makesure you've connected an RFcoaxial cableto the CABLE/ANTENNA OUTPUT jack on DVDNCR and TV'scorresponding Cable/Antenna input jack. l, Hake sure the DVD/VCR and theTV are on._une theTV to the appropriateVideo input Channel (if you need help,go to page 18), 2, Using the DVD/VCR's channel buttons, tune to the programyou want to record. Pressthe RECORD button. 3, If the remote that camewith your DVD/VCR operates your TV,iust pressthe TV burton and usethe channel up and down buttons to changethe channel on the TV. If the remote doesn't operate your TV, usethe TV's remote control to changechannels, 4, When you're finished recording, remember to turn theTV back to itsVideo Input Channeland watchTV through the DVD/VCR, Hotes: Thisfeature might work differently if you receiveprogrammingvia a came box. [f you receiveprogrammingvia a satelite receiver,this feature isn't available--you can't record one satellite program and watch another satellite program. The remotethatcame withyour DVDIVCRisa programmaMe Universal remotethatcanbe programmed tooperatemany brandsand modelsofTVs.Go to page2[ if you want to program the remote. When you stoprecording, a delaymay occurwhle theDVD!VCRgeneratesinformationaboutthe recording forthe DiscLibrary, _ Graphics contained within ghis publication are for representation only.

Start recording on the disc (tune the DVD/VCR to the channelyou want to record) and press

RECORD), 2, Insert the videocassette tape you want to play after you've started recording on your DVD disc. 3, Hake sure the TV istuned to the channel that matches the jacksyou used to connect the DVD/ VCR to the TV (theTV's video input channel). 4, PresstheVCR's PLAYbu_ton, Note:The VOltwii[ use the analog path because the DVD Recording [s using the digital path. Therefore,the [nfo Display won't be available and the ¥CRmenus will be different More information [s available [n the VCRsection of this chapter, OlD RFCORDoutto_ Play Disc Copying a DVD disc (DVD+R o_ DVD+@_ e_ a Vide_casse_e Tape To copy a disc to tape, use the copy feature to savesome steps, I, Put a DVD+R or DVD+RW disc into the disc tray. g, Put a blank videocassette tape into theVCR deck, _, If the main menu isn't on the screen,press MENU, 4, Press the down arrow button until the Discmenu is highlighre&and pressOK. 5, Pressthe down arrow button until CopyDiscis highlighted,and pressOK, _. SinceCopyDiscis highlighted,just pressOK (the DVD/VCR starts playingthe disc and recording the disc to the videotape au_omatically).AIIthe titles on the disc will be copied, If you don't want to record the disc onto the videcasserretape, pressthe down arrow button to highlight Canceland pressOK. 7. If you only want to copy a specifictitle or a specific chapter,you can create a pUist (goto page 48 for instructions). Notes: You can'tcopy pro-recorded DVDs thatarecopy-protected, Most movieso_ DVD discsarecopy- protected, ifyou setup a p[ay[ist on theDVD disc,onlythecontentofthep[ay[ist willhe copied,Tocopy theentiredisc, you'_need tode_etethep[ay[ist first. Youcan also copy a disc to tape via the Timers menu by setting up a Transfer Timer (for more information, go to page 30), Graphics contained within chis publication are for representation only 2_

1, From the DVD/VCR's main menu,usethe remote's arrow buttons to highfght Timers,and press

the OK burton. Tip:Y0u can also accessthe Timers menu by pressir_gthe TIMEI*GLII)E button on the remote coatroL 2. SinceAddTimer is highfghte& just pressOK (theTimer Setupscreen appears). 3. If you want to give the Timer a name,highlght Name and pressthe INFO button (the on-screen keyboard appears--folow the on-screen instructions to namethe timer).When finished entering the name,make sure you pressthe right arrow button to highlight Doneand press OK. 4. Pressthe down arrow button to highlightthe Channelfield and usethe number buttons on the remote to enter the channel number,and pressQK (highfght moves to Day). To enter aVideo input ChanneJ,pressthe right arrow button. 5. Use the number buttons to enter month and day.Tochangethe frequency (once, daily,weeld}; etc.), ptess the right arrow button,When finishe& pressOK (highlight movesto StartTime). & Use the number buttons to enter the time you want to start recording. Pressthe right arrow button to changethe a,m,/p,m,setting.When finished,pressOK (the highlightmoves to StopTime). 7. Use the number buttons to enter the time you want the DVD/VCR to stop recording. Pressthe right arrow burton to changea,m./p,m,setting.When finished,pressOK (the highlight movesto Destination). 8+ With Destinationhighlighted--press the right arrow button to switch between Tape(to record to theVCR) and Disc(to record to a DVD+R or DVD+RW disc),When finished,pressOK (the highlight moves to RecordingQuality). 9+ You canchangethe quality of the recording by pressingthe right arrow button.The better the quali_T,the more spacethe recording takes up on the disc or tape--(go to page52 for more information). PressOK to confirm the quality recording setting. I O.When you're finishe& make sure KeepTimer is highlighted and pressOK. Notes: The DVD/VCI'sdock must be set in order for Ti_er [_ecordir_gsto work property. Set:_ing up ¢i_er recordings _:e transfer a _isc _:_ tape er tape _e _isc L From the DVD/VCR's main menu,usethe remote's arrow buttons to highlight Timers,and press the OK burton, 2, Pressthe right arrow butron to highlight SetTranslkrand pressOK (theTransfer Setupscreen appears), 3, If you want to give the Timer a name,pressthe INFO button when Name is highlighted (the on= screen keyboard appears--follow the omscreen instructions to namethe timer),When finished entering the name_makesure you pressthe right arrow button to highlightDone and pressOK (the on=screenkeyboard disappears),Press OK again(highlight movesto CopyFrom/To), 4, Pressthe right arrow button to choose whether you want to copy Discto Tapeor a Tapeto Disc, Press OK, the highlight moves to Day, 5, Use the number buttons to enter month and day,When finished,pressOK (highlight movesto StartTime). & Use the number buttons to enter the time you want to start recording. Pressthe right arrow button to changethe a.m./p,m,setting.When finished,pressOK (the highlightmoves to Quality), 7. To changethe quality,pressthe right arrow button, 8. When you're satisfied with the settings,pressthe arrow down button to highlight KeepTimer,and press OK, Hake sure the disc is in the disc tray and the tape is in theVCR deck before the Timer Recording isready to start. 30 Graphics contained within this publication are for representation only.

Showsyou'verecordedto a DVD+R or

DVD+RW dsc are called t_tles. ' Show Disc Library You canfind a show you recorded to disc more quickly by using the DVD/VCR's Disc Library. Everytime you useyour DVD/VCR to record a program,the DVD/VCR assignsthe disc a numbe_and keeps track of whacyou've recorded andwhen you recorded it,The disc'slibrary stores the following information about eachdisc: Disc Name and Number The number of titles (recordings) on a disc Recording spaceavailableon a disc Name of the title (show,ptogram, movie) Date the program was recorded Genre of the program (you mayneed to assign) Which disc is loaded (indicated by a round disc symbol next to the title or disc name) Editing t,he Genre of a Title Most of the Disc Library's contents are automatically created if the informationisavailable,but you canadd or changethe genre when the disc is loaded in the DVD/VCR, I + Insert the DVD+R or DVD+RW disc into the DVD/VCR that hasthe recorded program with the genre informationyou want to edit, 2. HighNghtOiscLibrary,and pressOK. If you want to edit the genre information for one of the recorded programs,use up/down arrow buttons to highlightthe program.The round disc should be next to the title, indicating that the disc is loadedin the DVD/VCR. 3. Press right arrow (the Sort byTitleoption ishighlighted), 4. Press down arrow until Assiw_Genreis highNghted,and pressOK (aNstof genresappears), 5+ Use the up/down arrow buttons to highlighta Genre and pressOK, It win take about 15 seconds for the DVD/VCR to savethe information, Sincethe Disc Library issavedin the DVD/VCR, you havea limited amount of spaceto keep disc contents, if the Disc Library becomes ful, youG!haveto delete some of the discsfrom the Disc Library to make room. Finding a t,itle (_evie_ pre_:rarn_ e_:¢) by using the Sort Feature I+ Press MENU (the main menu @pears), 2+ Pressthe down arrow button urltil DiscLibraryishighlighted,and pressOK (alist of titles appears). 3+ Pressthe right arrow button, Eachtime you pressthe down arrow button, the next option appears, $o_ by Title When you pressOK with Sort byTitlehighlighted,the on-screen keyboard @pears.Enter the first character of the title you're trying to find and select Done (the titles s_rting with that letter @pear, with the first in the list highlighted). Sort by Genre Lists contents of the disc bythe Genre (you mayneed to assigna genre to recordings),Use the arrow buttons to highlight a Genre, and pressOK (all titles that you've assignedto that Genre appear), Sort by Da_e Lists contents of the disc bythe dare recorded. Other Sorting Opt:iens_$how All Discs When you choose ShowAIIDiscs,additional sorting options appear: $or_ _y ._p_¢," Lists the discsby the amount of recording space left. Se_ _y Disc N_,: Liststhe discsnumerically. Se_ _y Dt_¢ Tit_e; Lists discsalphabeticallyby disctitle, $ffew AH Tlt_le_:Lists all the titles recorded. Delete D_¢_: Deletes the discthat is highlighted and the its contents from the Disc Library_but doesn't delete the contents from the discithe titles are still on the disc, Graphics contained within this publication are for representation only 3

To play recordings, do the following:

I. Turn on theTV and the DVD/VCR. 2. Hake sure theTV istuned to the correct Video input Channel(for help,go to p. 18). 3, Insert the DVD+R or DVD+RW disc you want to play. 4. Once the DVD/VCR reads the disc'scontents, the main menu appears.If the main menu doesn't appear,press HENU (the main menuappears). Notes: If you selectedAutopJay On in the Disc Options menu (page 49), the disc's title menu appears automaticaffy when you insert the disc. If the screenis blank, you might not haveyour TV tuned to the correctVideo Input Channel For more information about Vi_]eoInput Channels,go to page 18. 5. Use the up and down arrow buttons on the remote to highlightthe Discmenu,and pressOK (the options appear). €. There are two waysto accessyour recordings within these menu options: PlayDisc If you want to play allof the recordings on the disc (or there isonly one recording), just press OK when this menu is highlighted (the first recording plays). biscTitle/Vlenu:PressOK when this menu option is highlighted (all of the recordings/titles on the disc appear).Use the arrow buttons to highlightthe title you want to select: To watch the program that you've highlighted, pressPLAY, if you want to namethe program,delete it, or changethe playmode, press OK (the options appear). ReaameTitJe:For DVD+RW discsor DVD+R discswhich havenot been finalized. PlayTitle:Playsthe movie, program or show. PlayFallTitle:Can only be selectedfor DVD+RW discsthat mayhavehidden chapters. DeleteTitle:For DVD+RW discsonly. Hate:You can delete a tit_e from a _VD+_ discthat hasn't been finalized but the program wiff stitl be on the disc.Youwill net he able to accessthe program once the tit_e has been deleted. Dear Chapters:For DVD+RW discsonly. $ - _for_a¢io_ba_:shows howm_ch spacei_dividuait_t|es a_e_a_i_po_thedis¢, For e×ar_p_e_'_he first ba_eprese_ts _he_it_eCa_o_i_e'_ Bday;¢he_o_ges¢ reco_din_ (l:itle} is the _hird e_e_ ¢_¢itled A_iversary. 4- showshowm_¢h re¢ordin_ _pace is left o_ €he disc Disc lnfo_a_io_ in addition to providing in_rmation about individualtitles on the disc,the D_c T/tieMenu givesyou helpful in_rmation about the disc itself,After you've inserted the DVD+_W disc or DVD+R disc, select Disc from main menu,highlight DiscTideMenu and press OK, The picture above isan example of what you'l! see(details are on the next page). _2 Graphics contained within ehis publication are for representation only.

i _ Disc

name The top menu bar isthe nameof the disc.With the disc name highlighted,press OK and the options described below appear: Note:You cannot select the disc name for a finalized DVD+R disc, The Edit icon Rename DIsc: Press OK, on=screenkeyboard appearsso you canchangethe name of the disc ([ on illustration above left), Erase Disc: DVD+RW discsonly.Erasesa DVD+RW disc so you can record new programming onto it (not availablefor DVD+R disc). lack Disc: DVD+RW discsonl>;Protects contents of the DVD so nobody canrecord new programming onto it. If the disc hasbeen locked,the menu option changesto UnlockDisc(not availablefor DVD+R discs). Finalize Disc: DVD+R only.Enablesa DVD+R disc to be played in other DVD players,Not availableif the disc hasalreadybeen finalized.After a disc is finalized,you can't record more programs to the disc, Make Campattb/e: DVD+RW discsonly.If you have madeedits to the disc (described in the next section),such asadding or deleting chapter markers or hiding chapters,this option enablesthe edited version of the discto be compatible with other DVD players. If you pressOK when a title is highlighted,the following options appear: Rename Title: PressOK when highlighted,and the omscreen keyboard appears.Follow the on-screen instructions to give the disc a different name.Highlight Donewhen you're finished,and pressOK. Play Title: PressOK when highlightedto pby the title. Play Full Tttle: PressOK when highlighted to play a title which hasbeen edited by hiding chapters if you want to play the title initsentirety (eventhe hiddenchapters).Not availablefor DVD+R discs. De/ere T/tie: PressOK when highlighted to delete the title, Follow the on-screen instructions on the confirmation scteen to deletethe title. (Not availablefor finalized DVD+R discs.) If you delete a title from a non-finalized DVD+R disc,the information will Slimbe on the disc but the title will be erased so there won't be any 'wayto accessthe title. Clear Chapters:The DVD/VCR addsa chapter marker every 5 minutes of recording,You canalso add chapters manually.Whenyou highlightthis option and pressOK, all chapter markers areerased.(Not availablefor DVD+R discs), F:di_:ing DVD+R and DVD+RW discs While playingthe disc,press the INFO button on the remote (the Info Displayappears),Details about the different icons appear in Chapter 4: PlayingDiscs.However, the edit feature includes special options for DVD+RWdiscs, 1. While playinga disc,pressthe INFO button. 2. Pressthe right arrow button to highlight the Edit icon _, and press OK.The following choices appear (use the up/down arrow buttons to highlighta choice and pressOK to select). /nsert Chortler Marker (DVD+RW discsonly).When you're recording to a disc,the DVD Recorder addsa chapter marker automatically every 5 minutes,Additionall_ you can insert chapter markers manuallyto segment different parts of the title.To insert a chapter marker, simply highlight InsertChopterfVJarkerduring playbackat the point where you want the chapter to start. Delete C;hapter Marker (DVD+RW discs only). Since the DVD/VCR automatically adds chapter markers every 5 minutes, you may want to make each chapter longer by deleting a chapter marker during playback, _ide Cha_te_ (DVD+RW discsonly). During playbackyou can hide a specific chapter so it isautomatically skipped,For more information, go to page_4. New TItle Frame You canchangethe thumbnail imagethat appearsin the PIoyeriVlenu (described in the next section).When the video appearsthat you want to useto visually represent the title_ press OK (the next time you access the PlayerfVlenua still image of this video will appear). Split Title (DVD+RW discsonly).you can divide one recording into smaller segmentsso that eachtitle appearsseparately in the DiscTit/eMenu.This isa helpful feature when you record a block of programming that containsseveral shows and/or when you copy camcorder videocassette tapes to a disc. Graphics contained within this publication are for representation only _

As with most editing features on recorded discs,Hide Chapter is only availablewith DVD+RVVdiscs.

Some people useit to hide comme_cialsor introductions to programs.Youhaveto Insert a Chapter P1arkerat the beginningand the end of the part of the recording you want to"hide." Note; Since the DVD/VCRautomatically adds a chapter marker ever}, 5 minutes during recording, it might be a good idea to Great At/Chepter Merkers before using the HideChapter feature. To find the Clear Chaptersoption, go to the Disc menu and select Disc Title Menu. Highlight the title you want to dear chapters from, and pressOK.Highlight _teer _hept_e_, and press OK. L While playingthe recording (called a title), press INFO (the Info Displayappears), 2. Press right arrow until the Edit icon _ is highlighted,and pressOK. 3. When you're at the beginningof the place you want to hide, pressPAUSE.Then,highlight Insert ChapterMarker (if the Info Displayisn't on the screen,press INFO and selectthe Edit icon _), 4. Use FASTFORWARD or ADVANCE to go to the end of the segmentthat you want to hide,and select InsertChapterMarker again, 5. To"hide the chapter" you must be playingit.Therefore, press REVERSEorAGA[N until playback is between the two chapter markersyou just inserted. If the Info Displayisn't on the screen,press INFO, selectthe Edit icon, and select Hide Chapter(eachtime the title playsthis chapter win be automatically skipped). _. To"undo" the Hide Chapter feature for normal playback,go to the DiscTitleMenu and selectP/ey Fu/ITitle. o CbEbC3E3 ddd ddd ddd -;; Safety Tab VC_ Basics TheVCR part of your DVD/VCR hasall the basicfunctions of otherVCRs.The basicconcepts are explained below and the advancedVCRfeatures are explainedon page32, Basic Playback [. Tunethe TV to your DVD/VCR viewing channel(03,04, or theVideo Input Channel). 2. Insert a tape in the DVD/VCR. 3. Press PLAYto play the tape. Press FORVVARDor REVERSEto cuethe tape to the desired position during Playmode, To advancethe tape approximately 30 secondsat a time during Playmode, pressthe ADVANCE button on the remote control. To go back approximately 10secondsduring play mode, presstheAGAIN button, Press PAUSEto stop action, For slow-motion playback,press FORWARD (while picture is paused), To move one frame at a time, press PAUSEon the remote (while paused)--each time you press PAUSE,the video moves fol ward one frame, Pressthe CH +/CH- buttons to remove any streaks from the picture, if necessary. Press STOP to stop playback. _ote: [f both a DVD disc a_d VC_ tape are in the DVD/VC_,go to the main menu (press _E[IU), select Tape,and press PLAYto start playing the tape. Tape Eject Press the STOP/E_ECT button on the DVD/VCR when stopped to eiect the tape,You can also press the OPEN.CLOSE button on the remote control to eject the tape. Basic _eco_ding I. If necessary, change the tape speed (SP or SLP) in Recordin_Options menu (page 52). _. If you're watching TVIpress the RECORD button on the front of the DVD/VCR (the VCR's RECORD button tha_ is next to the STANDBY/ON button turns on) to begin recording. 3. Press the STOP button to halt recording. If you just want to pause the recording for a short time (like during a commercial), press PAUSE instead of STOPTo resume recording, pressthe RECORD button on the remote control. Check the Safety Tab Hake sure there isa tape in the DVD/VCR with its safetytab in place,Youcannot record on a tape if the safety tab hasbeen removed, if the safer' tab is removed and you want to record, simply cover the hole with adhesivetape. 34 Graphics contained within this publication are for representation only.

o' o' n'

'W D°%_' -- INFO burro PLAYbuttol Advanced VCR Features TheVCR portion of your DVD/VCR combo works like mostVCRs, but hassome additional features for playbackand copying tapesto disc.Most importantly, you need to understandthe difference between digital and analogasit appliesto theVCR portion of your DVD/VCR combo. The analogsetting provides standard playbackthat the majority of VCRs provide--play; stop_pause_ record. In addition to standardVCR playbackfunctions,the digital path provides you with all kinds of neat features that mimic a DVD,You canonly use one path at a time; digital or analog, All DVD functions must usethe digital path--there isonly one digital path.Therefore, there are times when the tape will play through the analogpath (for example,when you record to a DVD disc and play aVCR tape at the sametime). The easiestway to see if you are usingthe DigitalVCR path, isto press INFO during playback.If youYe in the digital mode, an Info Display@pears. Advanced Playback I_ Insert atape, :_+ Press PLAY, 3. Press INFO (if the Info Displaydoesn't appear,pressANALOG DIGITAL on the remote control), 4+ With the Info Displayon the screen,use the lefdright arrow buttons on the remote to highlight different icons to accesstheVCR playbackfeatures. T,n e Playback Dispk;y ii4cat@ Reset Counter Index %a<)_ Zero Seard A B Fdit P!ay Mode: Xa_da,a orAB Repeat VCR lnfo Display Above, the time display shows the amount of time that haselapsedon the tape. Below the time display is the play indicator that tells you the state of playback(play,pause,stop,erc,). _ote;These items are for display onJy--yol caBllot adjust or change the_, _ese¢ ¢o_¢er: Setsthe 0 point,which meansthe elapsedtime in the Timer Displaystarts from the point when you pressOK with the ResetCounter icon highlighted. Zero Search: FastfoPwardsor rewinds the tape to the point that you selectedasthe 0 point (above). Ir_e× Search; Eachtime you press RECORDon theVCR, the tape records an index marl<.Use index Searchto quickly find the beginningof a program.With the index Searchicon highlighted,you can qukkly go back or go forward to the next index point, Press FORWARD to go to the next index Mark, press REVERSEto go to the previous Index mark.The Tapemenu will he displayedwhile the DVD/VCR searchesfor the next Index Mark. A-B E_i_: This feature was designedso that you can copyyour videotape collection of home movies to DVD discsin separate segmentsso the events appear asseparatetitles on the DVD disc,For example,you might haveyour wedding;a birthday party; and your family reunion on a tape from your camcorder recordings.If you set up A-B Edits,these events will appear asseparatetitles on the DVD disc,With the AB Editicon highlighted,pressOK (the options appear on the screen), Inser_ A _oi_/Ir_ser_ B _oi_: pressOK to marl

After you put a videocasse_e tape in theVCR deck,there are severalw_s to record programming,The quickest wv to start recording isto pressthe RECORD button

(on the front of the DVD/VCR next to the STANDBY/ON button) while you're watching a show,You don't evenneed to remember to pressthe stop button if you usethe ExpressRecording feature in the recording barmen Note:The DVD/VC!supports Macrovbion and won't record copy-protected material. Express Recording Feature Eachtime you pressthe RECORD button on the remote the recording time increasesby 30 minutes, up to the maximum limit (the status is listed on the far right side of the recording banner).The DVD/VCR will record for the amount of time you specified and then stop automatically.At anytime during the recording,you canextend the recording time by pressingthe RECORD button. Watching one ¢han_e! while ye_ record a_o_her ¢ha_e[ If you want to watch another channelwhile you're recording, yOUneedto make sure you've connected the DVD/VCR to theTV properly (both audio/video cablesand art RF coaxial cable need to be connected): 1. Hake sure the DVD/VCR and theTV are on,Tune theTV to the appropriateVideo input Channel (if you need help,go to page 18). 2. Put a tape with its safety tab intact into theVCR deck. 3. Using the DVD/VCR's channel buttons, tune to the program you want to record. Press the RECORD button, 4. _therem_tethatcamewithy_urDVD/VCR_Peratesy_urTV_iustPresstheTVbuttonandusethechannel up and down buttons to go to a differont channel [fthe remote doesn't operate your TV,use the TV's remote control to change channels. [fyou don't see a picture on the TV or the picture looks fuzzy ("noisy"), press the ANTENNA button on the remote control, _. When you're finished recording, remember to turn theTV back to itsVideo Input Channeland watchTV through the DVD/VCR, Notes: This feature might work differently if you receive programming via a cable box, If you receive programming via satellite receiver, this feature isn't available--you can't record one satellite program and watch another satellite program. The remote that came with your DVDIVC! is a programmable U_iversalremote that ca_ be programmed to operate many brands and models of TVs.Go to page21 if you want to program the remote, Recording _o _ape whNe you watch e DVD disc 1. Hake sure the DVD/VCR and theTV are on._une theTV to the appropriateVideo input Channe} (if you need help,go to page 18), 2. Put a tape with its safetytab intact into theVCR deck, 3. Using the DVD/VCR's channel buttons, tune to the programyou want to record. Press the RECORD button, 4. Put the DVD disc into the disc tra_ and close it. 5. Press PLAYto start playingthe DVD disc. Notes: Since you're using the digital path to play the DVDdisc, the YC! wli be recordingin true analog mode.Therefore, the advanced V(R features i_ the InfoDispiay won't be avalable when you play the tape, Timer Recordings Go to p_ge _0 for i_str_ctio_s to set _p Timer Recordings (both Add Timer _ Set Transfer). CO_Ybutto;i if yo_ set _p A-B Edits (p_ge 3_)_ o_ly the A=B Edits wil be recorded eo disc whe_ yo_ _se _he COPY b_o_ o_ _he fro_ of eh_ DVD/VC_. Copying e Vi_eo¢_sse_e Tape to _ DVD disc (DVD+@ or DVD+RV_ To copy a disc to tape, use the COPY button on the front of the DVD/VCR to savesteps. 1. Put a DVD+R or DVD+RWdisc into the disc tray (if i(s a blank disc,you'/need to wait for the DVD/VCR to initiafze the disc). 2. Put the videocassette tape you want to transfer to a disc,into theVCR deck and makesure it's cued up or rewound to the beginning, 3. Pressthe COPY button on the fi ant of the DVD/VCR. The current record quality setting isdisplayedalongwith the Copy Hode, Press OK to confirm and beginthe copy (the DVD/VCR starts playingthe tape and recording onto the disc automatica/y). If you want to changethe record quality setting, pressthe down arrow button to highlight Canceland pressOK.The record quality canbe changedin the Setupmenu (select Recurdin_Options). 4. To watch TV while the tape is copyingto disc,you'll need to changechannelson theTV because the DVD/VCR is conducting two functions--playback of the tape and recording onto a DVD. Note:You can't copy pro-recorded videocassette tapes that are e_crypted with Nacrovisio_ software+ _ Graphics contained within this publication are for representation only.

Graphicscontained within this User_ Guide are for representation on/y_Some

of the menu screens,buttons_ and display messagesmight be di[ferent in your product than they appear in this book. The on-screenhelp text provides the most current operational information. page 37

discs may not be compatible

due _o laser pickup and design. This is an example of a one- sided disc. This is an e×a_ple of a two- sided disc--the tJtJe is usually in the center of the disco When youstopplayinga disc,the player [email protected] start playingthe discagain,the DVD/VCB picksup whereyouleft off unlessthe discis removedor the playerisunplugged,or you pressthe STOPbuttontwice, Regional Coding Both the DVD/VCR and the discsare coded by region,These regional codes must match in order for a pre-recorded DVD to play.ThispJayetscode is region h However, discsyou usefor recording (DVD+R and DVD+RW) aren't assignedregion numbers. Types of discs you can play DVD+R and DVD+RW discs- used to record programming.Instructions about playingand recording these discsare in Chapter 3. DVDVideo discs- contain picture and sound [DVD-R, DVD-RW (video mode only),DVD+R, DVD+RW, and DVD ROH are compatible with this player],DVD-R discsmust be finalized, CDs (CD-R, CD-RW) -Audio CDs con_in musical or sound content only, rap3 discsare DDs tha_ contain rap3 files,This playerisalso capableof playingCDs that contain JPEGfiles,and Multisession CDs. Video CD discs- Like DVD video discs,VCDs contain picture arid sound content, The difference isthe amount of information that canbe stored on the disc,VCDs typically havelower picture and sound quality than DVD discs, SuperVideo CDs (S-VCDs) hold up to 70 minutes of digital sound and video,with HPEG-2 standard video and HPEG-I standardaudio (but you must use DVD+R or DVD+RW discsto record on your DVD/VCR, NOT S-VCDs),Additiona}ly,S-VCD disc compatibility is dependent on which P1PEGcoding software, disc design software, and/or disc writer software are used;and the discsthemselves. Yo_ ca_'_ play,he _olowi_ypes of _Jscs:_Laser_isc$_ CD=I_ ¢D= RO_ (co_p_er o_ty discs)_discs_ec_ed_sir_go'_herb_oadcas_st._nda_s(i.e.PALo_$ECA_)_DVD=_ discs, Note: Some discs may net he compatibJe due to laser pickup and disc design. To Lead a_d P|ay D_scs Turn on the TV and your DVD/VCR (pressON'OFF on the remote or pressthe STANDBY/ON button on the DVD/VCR). J. Hake sure the TV istuned to itsVideo Input channel(if you need more information, go to page 18), _+ Pressthe OPEN/CLOSE burton (the disc tray opens), 3, Placea disc gendy into the tray with the disc'slabel facing up (double-sided discshavecontent on both sides,so you can place either side up). 4. Pressthe OPEN/CLOSE or PLAY button.The disc tray doses,The DVD/VCR readsthe disc'stable of contents, and then one of three things happensdependingon how the disc was prowammed: The discstarts playing, The disc menuappears on the screen.One of the options will start disc play.Highlight that option and pressOK. The DVD/VCR's main menu appearson the screen.Highlight the Disc menu and pressPLAY, Note: If you don't seea picture, pressSTOP(the main menu appears), and check the position of the PROOSCANswitch on the back of the unit, Make snre the PROQSCANswitch is in the OFF position.Try playing the disc again. The on_ytime the PROGSCANswitch should be in the ON position is if yet connected this unit to a progressivescan TV via Y,PI, Pr COHPOIEIT jacks, 3_ Graphics contained within this publication are for representation only.

Eachdisc isprogrammed with different features.There are three separatetypes of menusthat you can

use to access features: The Disc menu - The Disc menu is part of eachdiscand is separatefrom the DVD/VDWs menu. The contents of eachDisc menu vary according to how the disc was authored and what features are included. To makethe Disc menu appeanpressthe MENU button while the disc is playing. The DVD/VCR's lnfo Display-The Info Displayappearsas iconsacrossthe top of the screen when a disc isplaying.It can only be accessedwhile you are playinga disc.It's turned on and off with the INFO button on the remote.The Info Displayicons changebasedon the type of disc you're playing.Go to page40 for more information. The DVD/VCR menu - If you're playinga disc,press STOP(the DVD/VCR's menu appears automatically). Remember: A feature will only wer_ Jf the disc wes programmed with thet _eaeure° For exclmple, Jf you cheese s_b_e_ on t:he_n_eD_sp_, t:hesub't_t,teswH_en_y_ppe_r _f _he d_s¢ w_ ¢re_ted v_h sub_l_les,_ _ menu or _¢en is _rc_yed eu_" i_ means _h_ i_em {or _ee_ure) _sn't; _val_Me. N;k/N _ t.it t Og RE',/ERSE butto _ F ....................................... IR-_)FF C, ZIO_ ARALOR OPEl ARRLE D[E_AL CLOSE "AD/ANCE button FORWARD butto_ PAlJ_Ebt,itto ! Search Options Picl:_re Scan To searcha disc during playback,use the FORWARD or REVERSEbutton. Eachtime you press FORWARD or REVERSE,your DVD/VCR scansthe disc faster until you reach the fastest scan speed. To resumenormal playback,press PLAY. Note: Many DVDtitles are programmed to prohibit skipping of warnings or credits so that yo_ can't fast forward through them. Free=e Frame and Frame Advance Whte a disc is playing,press PAUSEto freeze the picture.To advanceone frame at a time, pressPAUSE again(the on-screen icon changesfrom PAUSEto FRAME).Eachtime you pressthe FORVv'ARDor REVERSEbutton, the picture goesto the next (or previous) frame.To resume normal playback,press PLAY. Slow Hotien (in _reeze Frame Mode) - DVD discs only While a disc is playing,press PAUSE.PressREVERSEor FORWARD (each time you press REVERSEor FORWARD the slow morion will get a little faster until you reach the fastest slow motion speed).To resume normal playback,pressPLAY Time Search - DVD an_ VCD discs only Makesure the Time Display(top left side of the hfo Display) ishighlighted,and then usethe number buttons to enter a specific time on the discthat is playing.Go to page4! for more information about theTime Displa}: Q_iek Fas_ Forwar_ and Q_cR Reverse - _VD and Audio CD only While you're playinga disc, press the AGAIN burton on the remote (the disc automatically repeats the last 10 seconds of the movie). Similarly, press the ADVANCE bugon to go forward approximately 30 seconds. PiaybacR ept:io_s Manyof your DVD/VCR's playbackfeatures are accessedthrough the Info Display(described on pages 40 through 44).Additionaly, with some discsyou can usethe Zoom Featureto seederails of an image. _oem i, While you're playinga dis< pressZOOM (the playerzooms in on the image).Eachtime you press ZOOM, the picture is magnifiedeven more (until you get to the maximum zoom level). 2, To see other parts of the picture when you've zoomed in on the image,pressthe up,down, lef:c, and/or right arrow buttons to go in corresponding directions. Graphics contained within this publication are for representation only, 3_

Using the On°Screen

|nfo Display The on=screenInfo Dispby con_ins manyplaybackfeatures,To seethe Info DispJ3_pressthe INFO button on the remote while a disc isplaying(the Info Displayappears acrossthe top of the screen).Eachfeature is illustrated with an icon, Usethe left and right arrow buttons to move through the different icons in the Info Display.Whenan icon is highlighted,usethe up and down arrow buttons on the remote to scrol! through the choices. Remembe_you canonly accessthe Info Dispby when you're playinga disc (or when playinga videotape via the digital path).AJso,the {nfoDisplayfeatures are only available if the disc was created with that particular feature (i.e. if you select the Angle icon,you won't be able to changethe camera angleunlessthe disc was created with different cameraangles).If one of the icons is"grayed out," the Info Displayfeature isfft availablefor the disc you're playing. The invalid symbol appearson the screenwhen you pressa button that doesfft haveanyfunction.To makethe Info Displaydisappearfrom the screen,press INFO on the remote control, PLAY Text will appear here as you highlight di_erent icons to help you use the Info Display. This is the lnfo DispJay youth see when you're playing a pre-_'eco_'ded DVD disc. To make _he !nfoDisp_y_pp÷_; p_'ess_he _NFO b_on o_ _he re_o_e control Use _he_ef__nd _'igh_?ow _u%%o_s %0 hi_h_i_h%diff÷_'en_ icons.Use %he up and down a_ow bu%%ons %0 sc_oH%h_ou_h %h÷ choices _vai_b_. DIGITAL AUDIO Time display Tr_ck Piay Hode _epea_ #n_o$ca_ (p_ge 41) (page 4_) (page 43) (p_ge 4_) (p_ge 44) Time display T_ack PlayBack Control Audio Repe_ (p_e 4_) (p_ge 4_) (p_ 4_) (p_ge _) (p_ge 4_) This is _he _nfo Display youth see when you_e pl_ying a Video CD, _lso ¢_Hed VCD. I_ PLAY DVD+P_nd DVD+RW_nfo Display... go _o p_ge 32. VCR _nfo Displ_y..o go _o p_ge 35. 4_ Graphics contained within this publication are for representation only.

This feature displaysthe drne that haselapsedduring playback,For DVD discs,the time displayedrefers to the current title and acts asa

Time Searchfeature. For example,if you like a particular scene in a movie,you can enter the elapsedtime the scene playsand skip right to it. L Highlight the Time Display and use the number buttons on the remote to enter the elapsed time you want to go to in that title.You must use two digits for each field. For example, ifyou enter O1:35:12,playback will start one hour, 35 minutes, and 12seconds into the title. Notes: For Audio CDs,the time displayed refers to the track that's playing. Some portions of a disc might prohibit searching or scanning, such as warnings or opening credits. Selecting a Title on DVDs or a Track on Audio ¢Ds or Video CDs Some discscontain rnore than one title. For example,there might be four movieson one disc (each movie might be considered a title). Eachtitle is divided inca chapters. To select a title via the Info Display; highlight the Title icon with the right arrow button on the remote control, Press the up or down arrow button to go to the next title:When you're playing aVCD or an Audio CD, use these instructions to go to a different Track. Notes: You can alsousethe number buttonson theremotetoenterthetit_e/track number. Hany disks only have one tit_e. Shortcut While you'replayinga disc,youcanusethe CH +/CH- buttonsto goto the next chapter or previouschapter. Chapter ken (DVD) BecauseDVD discs usedigital technology,a title can be divided into individual chapters (similar to tracks on a CD).You canskip to a specific chapter by usingthe Chapter feature in the Info Display. L While a disc is playing,press JNFOon the remote (the Jnfo Displayappears), 2,. Press the right arrow button until the chapter icon is highlighted. 3. Press the up and/or down arrow buttons to go to different chapters. Notes: You can alsousethe number button(s)on theremoteto enterthechapteryou want to play--youmay need to enter2 digits, dependingon teenumber ofchapterthereareon thedisc(forexample,ifthereare 14 chapters, to go to chapter4,press0 and then press4).The moviestartsp_aying at thebeginningofthechapteryou entered. The Chapterfeaturewon'twork ifthediscisn'tformattedwithseparatechapters. When you'rerecordingonto DVD+R and DVD+RW discs, a chaptermark isaddedautomatically every5 minutesofrecording. Subtitle Icon (DVD) To changethe subdfle language,highlightthe subtitle icon and pressthe up or down arrow bur_onsto scroll through the choices (the subtitle languageoptions appear in the box at the bottom of the Info Display). Notes: Changb_gthesubtitlelanguagewith theInfoDisplaywillonlyaffectthediscyou arecurrently playing. When thediscisremoved or theplayeristurnedoff,thesubtitle languagewiff revertto the_anguagesettingspecified throughtheDVDIVCRN Language menu. If the disc doesn't contain the language you want to use, the disc's default _anguage is automatically selected. Some discsareprogrammed toonlyallowyou toaccessthesubtitle featurethroughthedisc'smenu.Ifchangingsubtitle languageviatheInfoDisplaydoesn'twork (asdescribedabove),pressHENU and changethesubtitle_anguageviathe disc's menu. Graphics contained within this publication are for representation only 4

By default,the Repeatfeature isOff.There are three Repeat eptions:

Title - repeatsthe title that is playing Disc - repeatsthe disc that is playing A-B - repeats a segmentof the discthat you select, For DVD discsandVCDs, play modesare also availab{efrom the Repeat Icon: DVD andVCDs: Playmode standardplaysthe discschapters in the order they were placedon the disc. DVD: Playmode playlistplaysa playlistyou create in the menu system (page48), Repeating Tittles, Chapters_ er Tracks I+ While a disc isplaying,pressINFO (the Info Displayappears). 2. Pressthe right arrow button until the Repeat icon is highlighted. 3. Pressthe up _r d_wn arr_w button to scr_ thr_ugh the di_erent Repeatoptions_Re_edt _de_Re_e_tdisc_P`e_eatA_ and Re_edt Stondord(the modesappear at the bottom of the Info Display), 4+ To turn off the Repeatfeature, pressthe up er down arrow button repeatedly until P/dyMode:Stonddrdappears. AB Repeat: AB Repeatlets you define a specific segment on the disc that you want te repeat. For example,you might want to watch a specific scene from a movie repeatedly: L Fol{ow steps I and 2 above, 2+ Pressthe up (or down) arrow button until "Repedt/Mode:AB.PressOKto setA;_eint"appearsat the bottom of the Info Display,Press OK when the discgets te the beginningpoint of the segment (theA point) that you want te repeat. 3. Go to the end of the segment you want to repeat. PressOK to set the B point (the segment you markedwill play repeatedly until you turn off the Repeat feature). 4. To turn off the Repeatfeature, highlight the Repeat icon, and pressthe up arrow button en the remote until Play/Mode:Stdndord appearsat the bottom of the Info Display. Audio icon (DVD and Video CD) ifthe disc was created with different languagetracks (recorded in different languages)er different audio fermats (Dolby, DTS,stereo_ etc.), you canchangethe audio option while you're playingthe disc. L While a disc is playing,press {NFO (the info displayappears). 2. Press the right arrow butten untl the Audio icon is hightghted. 3. Press the down arrow button on the remote to scroll through the availableaudio options. 4. When the option you want to use ishighlighted, pressthe OK button, Notes: The _anglage feature only WOrkSif the disc was created with muttiple language tracks. If the disc doesn't conrail the language you selected, the disc wil play in the default language, Wher_you cheese an audio language durilg disc p_ayback,you orty override the audio _anguagesetting in the DVDIVCI's Languagemenu temporarly, Some discs are programmed to only alow the audio setting to be cha_gedvia the disc's rae_. If cha_gingaudio option via the I_fe Display doesn't work (as described above), press _E_U and cha_ge the audio settingvia the disc'sme_u. _ Graphics contained within this publication are for representation only.

Some discscontain multiple anglesof a particular scene or sequence,if the disc only hasone angle,this feature won't work. Currently,

very few discshavethis feature. I. While a disc isplaying,pressANGLE on the remote, if the disc wasn't created with multiple angJes,the invalid symbol appears.If the disc contains multiple angles,theAngle icon appearswith the current anglenumber and the number of anglesavailable.For example, I of 4 indicatesthat Angle I isdisplayedand there are 4 different anglesavailable. 2,. Pressthe up arrow button to go to the second cameraangle,Press the arrow button againto go to the third angle,etc. 3. To resume normal playback,scroll through the camera anglesuntil you get to the original angle. Play Merle Icon (Audio ¢D) When you playaudio CDs,the various PlayModesare availablefrom the Info Display,The PlayMode feature lets you set up the order in which you want the tracks on the CD to play.Thereare three PlayModes: Standard; the tracks playin the sameorder aslisted on the CD (starting with track I).This isthe default play mode. Randem, the tracks on the CD play in a random arden Program: the tracks play in the order you designate.Tousethe Program play mode, you must set up the order in which you want the tracks to play in the DVD/VCR's main menu system (goto page48 for instructions), Random The Random option playsthe tracks in a random arden L While you're playinga disc,press iNFO (the Info Displayappears). 2,. Pressthe left or right arrow button to highlightthe PlayMode icon. 3. Pressthe d_wn arr_w butt_n unti_P_y M_de:R_nd_ma_ears _nthe text at the b_t_m _f the _nf_D_s_ay(the tracks start _aying in random order). To switch back to StandardPlayback,follow steps I through 3 above unti{ PlayMode:Standardappearsunderneath the Info Displayicons, Note:The player defaults to Standard Playbackwheneveryou put a new CDinto the DVD/VCR. Program The Program PlayHode isonly availableafter you set up a playlist viathe DVD/VCR's Disc menu (page48). Graphics contained within ehis publication are for representaeion only _3

mntroScan icon (Audio

CD) Use the IntroScan feature to preview each track on the CD, 1. While the CD is playing, press INFO (the Info Display appears). 2,. Use the arrow buttons to highlight the IntroScanicon, 3. Press OK (the first 20 secondsof eachtrack starts playing). Playback Control (PBC) Icon (Video CD) Use the arrow buttons to highlight the Playback Control icon. Press the up or down arrow button to go back and forth between On and Off, How Playback Control (PBC) works varies for differentVideo CDs.WRh mostVideo CDs, turning on Playback Control enables you to access theVideo CD's menu if it has one and requires that you navigate through theVideo CD's contents by using theVideo CD menu instead of the DVD/VCR's Info Display.When PBC is on, you won't be able to use any repeat modes or skip titles in the DVD/VCR's Info Display. Playing Discs You Recorded (DVD6R and DVD÷RW) Playbackof DVD+R and DVD+RW discsthat you used to record programs is explainedin Chapter 3 (goto page32). Playing _p3 or JPEG fi|es Your DVD/VCR can pby rap3 files and JPEG files.You can also create a musical slide show by putting both rap3 (PIPEG-I, layer 3) and ]PEG files on the same disc. _p3 is an audio file format which compresses recorded music. It was developed by Fraunhofer Gesellsch_ff in collaboration withThomson Inc,The main advantage of the rap3 format is the ability to store CD=quality music tracks that are user-friendly and compressed on a personal computer, rap3 (MPEG=3,which stands for Notion Picture Experts Group=Layer 3,meaning the third layer of information) is a format used to compress digital audio. Since the audio is compressed, it takes up less space. Note:You can only play true rap3 files in the DVD/VCR--some products usesoftware to compress rap3 files and convert them to other formats such as MPX.Your DVD/YCRwon't recognize or play _IPX files or other types of converted rap3 flies. JPEG files are imagefiles. Makesure that they havea resolution of lessthan S me_pixels (approximately 2MB). Note:The time taken for the contents of the disc to he displayed variesaccording to the size and number of JPEGfliesactually on the disc. If nothing is displayed after a few minutes, it is likely that certain flies are too large. In this case,reducethe files' resolution to less than 5 megapixeis (approximately 2H8) and write another disc. Creating an rap3 Disc on Your Computer Your DVD/VCR handles HPEG=I, layer 3 audio.If you encodeyour own rap3files from an audio CD,avoid using the features of HPEG=2,such asthe 22kHz sampling frequency, Be sure to make a data CD ra_herthan an audio CD,If you makean audio CD, you will lose the extra features and compression of the rap3format. Notes: Some transport modes (reverse and fast forward) are not availaMe for rap3 C_s. When h_r_i_ mu_tisessio_ CDs,mahe s_re yo_ close the _astsession. i. Placethe disc in the disc tray with the printed sidefacing up. 2. if the gutoPluyoption in the PlayMode menu isenabled (see page49),the disc'scontents are displayed,otherwise pressthe PLAYbutton to displaythem, 3. Selecta folder usingthe A and _ buttons on the remote control, then pressOK to displaythe list of files or pressPLAY to start playingall the files contained in the leiden Example of folder list. 44 Graphics contained within this publication are for representation only.

Example of rap3 files_

IE×ample of _PEG files. 4. Select a file usingthe A and _'_buttons, press OK (the playbackoptions appear).Usethe A and V buttons to scroll through the options and pressOK when desired option appears. rap3file: if you pressplay when a file is highlighted (andyou selected PlayAII),the playerbegins by playingthe selected file, then al! the files and subfoJderscontained in the samefolde_:The playerthen playsthe contents of the folders at the same levelas the folder containing the file selectedat the start. If you chose StundardPlay,playbackwill stop after all of the flies in the current folder (andits subfolders) haveplayed. Notes: WflHe listening you can use the F_ or _ button to go back to the previous track or go to the next one, and press the NENU button to display the disc's contents. Some file names are too long to be completely displayed. JPEGfile: the playerstarts the slide show with the JPEGfile you haveselected and proceeds to displayall the JPEGfiles in the samefolder, then all the JPEGfiles in the subfolders located in the samefoJden Note: During the slide show you can use the ANGLEbutton to rotate the picture 90%the ZOON buttonto magnifythepicture, the_ or_,Hbuttonsto go back tothe previous pictureor go on to thenextone,theFORWARD and REVERSEbuttonstochange the speedoftheslideshow (thespeedselection variesdependingupon thesizeofthe)PEG fi(es), and the NENU button to interrupt the slide show and display the disc's contents. N. When the playerhasplayed allthe files,the disc'scontents appean €. Press STOPto end playback, Play Disc Nusical SHale Show: Playing JPEG and rap3 fi|es at the same time The way the JPEGfiles and rap3files are displayedwhen you put the CDoRdisc in the DVD/VCR, varies depending upon how you set up the files and folders when you created the CD,The musical slide show enablesyou to displayJPEGfiles while listening to rap3 musicfiles that are on the same disc, If you want to control the order in which the rap3 musicfiles play,you need ro set up a playiistby goingto the Discmenu and choosing Playlistand enter the individual rap3files in the order you want to play them,Then, you choose PlayDisc and choose go_hfrom the submenu.Whenthe JPEGlist appears, select the picture you want to useas the first slideshow picture.When playbackstarts,the rap3 playlist will start playingautomatically in the order you designatedas the ]PEGfiles are displayed. The order the rap3files and JPEGfiles play in the !qusiealSlideShow as described in the instructions that follow are designatedbythe order the files were placed on the disc. 1. Insert the discthat hasthe rap3and jpegfiles on it into the DVD/VCR disctray. 2. Close the disctray (pressOPEN/CLOSE), 3. After the DVD/VCR readsthe disc, highlightthe Disc menu and pressOK. 4. SincePlayOiscis highlighted,just press OK. S. Pressthe arrow down button on the remote to highlightBoth,and pressOK, 6. Select the rap3folder and the JPEGfolder. 7. To try different options, pressthe right arrow button to highlight StandardPlay.Usethe up/down arrow buttons to scroll through the choices available. Graphics contained within this publication are for representation only _

of the DVD/VCPJs Menu System

Watch YV Menu Disc Menu Tape Henu Disc Library Henu Timer Menu Setup Menu GraphicscontainedwithinthisUser'sGuideareforrepresentation on/y.Some ofthemenu screens, buttons,and disp/a}/ messagesmightbe different in}!our productthanthe}/appear in thisbook.Theon-screenhe/ptextprovidesthe most current operationa[ information. page 46

Sincethis product hasmanyfeatures,it hasa wealth of menusand options.To accessthe main menu during playback,pressthe STOPbutton on the remote.To accessthe

main menu when you're not playinga disc or tape, pressthe MENU burton. NeW te navigate threugh on-screen menus Throughout the DVD/VCR's menu system,you'll seearrows on the on-screen menu bars.Thesearrows indicate you can usethe correhting arrow buttons on the remote control ro navigateto different menusand accesschoices.When a menu item is highlighted,press OK to select the menu. If you seethe left arrow button, you canpressthe left arrow button on the remote control to return to the previous menu.Throughout the menu system,the GO BACK button takesyou to the previous menu. Press the left arrow butfcon on the re_ote to go to the previ@u$ menu. Press the right arrow button or the OK but_o_ Pressthe up or do_s arrow butf¢on op¢io_s, The Main Menu The main menu is divided into thefollowing submenus: Wet¢_ TV = shows current channelnumber or input. D_¢ = playsa disc,accessesthe disc title menu,enablesyou to cop>,a disc to tape,enablesyou to crea_ea customized phylist (audio CDs and DVDs), selects the screenformat for DVDs,and accesses rifle menusand disc menusfor DVDs. Go to page48 for details, Tape - provides options forVCR playback,such asAutoPiay;allows you to copy a tape to disc;allows you to select segmentsof the rape for editing. Go to page49, D_¢ Library - contains information about all programs you've recorded usingthis DVD/VCR.You cart usethe DiscLibraryasa searchtool by sorting recorded programs,As much information aspossible is stored automatically,The information is stored in the DVD/VCR's memory and hasstorage limits.You may needto delete some library contents in the future to make room for new recordings. For detailed information about the DiscLibrary,go to page3 I. Timers = set up timer recordings and view the list of existing timer recordings. Go to page50 for general information about this menu.For instructionsto set up a time_ go to Chapter 3 (page30), Setup - accessesall of the menusfrom the interactive Setup(the menusyou went through the first time you turned on the product); parental controls (radng limits); record quality settings;language options for on-screen menusand discs;and advancedsettingsfor audio and component video. Go to page50 for more information. Graphics contained within _his publication are for representation only 47

The WutchTV menu shows the current channel or input,To watch TV, pressOK when the WatchTV

menu ishighlighted (the channel banner appearsto show you availableprogram information, such as channel,name,and time). For more information, go to page28. Play Disc Disc You canonly accessthe disc menu when you've inserted a compatible disc into the DVD/VCR,The submenusfollow: Play Disc: starts playingthe disc. The DVD/VCWs PlayerMenu shows hew a DVD+R or DVD+RWdiscreenuwillappearinanother DVDplayer. Note: not a_l I)VD#ayers support DVD+Rand DVO+RWdiscs. Disc T[,tle Menu: _vailabieonly when you've inserted a DVD+R or DVD+RW disc that you've recorded in this DVD/VCR.With DiscTitle highlighted,pressOK to accessthe disc'stitle menu (the disc name appearson the top and eachrecording is listed below the disc name). For details about the Disc TJf;leMenu_ go to Chapter 3 (page 32). If you pressOK when the disc nameis highlighted,the following choices appear: Reneme Disc: PressOK when highlighted (the on=screenkeyboard appears).Follow the on- screen instructions to givethe disc a different name.Highlight Donewhen you're finished,and pressOK,You cannot select the disc namefor a finalized DVD+R disc. Erase DJs¢:Erasesa DVD+RW disc soyou canrecord new programming onto it, Not available for DVD¢R disc. Leek Disc."Protectscontents of the DVD so nobody canrecord new programmingonto it. If the disc is locked,this option changesto unlock,This option isn't availablefor DVD+R discs, FJneltxe Disc: Only appears if you havea DVD+R disc in the DVD/VCR. In order for a DVD+R disc to be playedinother DVD player,you must finalize it. Make Cempattble: DVD+RW discsonly.If you havemade edits to the disc,such asaddingor deleting chapter markers or hiding chapters,this option enablesthe edited version of the disc to be compatible with other DVD players. If you pressOK when one of the recordings (titles) is highlighted,the following choices appear: Renametitle',Pby title; Playfull title; Delete title; and Clear chapters. PMyer Menu. • shows you how a DVD+R or DVD+RW disc'smenu will appear in other DVD Players. A small still4rame from eachtitle you record (program,show,movie) appearsasa thumbnail image. Use the DVD player's left and right arrow buttons to highlighta thumbnail so you can playthe recording, If you havemultiple recordings and want re get back to the beginningquickly,highlight Goto page / (if availableon the screen) and press OK, Here: Not all [_VDplayersare able to play DVD+Rand DVD+RWdiscs. Checkthe DVD player's owner's manual PMyHst: (availablefor Audio CDs and DVDs):You cancreate a customized pJaylistjust like you can with manyCD playerswhere you rearrangethe order in which the songsplay.The playlist isplayed viathe Program Playoption in the Info Display(page43),When you want to cop}, a singletitle from a DVD+R or DVD+RW discto a tape,you canset up a pJaylistfor the disc with only the title you want to copy,To set up a playlist,follow the onscreen instructions. Cepy DJsc:Simultaneouslystarts playingdisc and recording the discto tape in theVCR. Noce: If you've created a playlist on the disc,only the playlistwill be recorded.To copy the entire disc,you would haveto delete the playlistfrom the disc before you choose CopyDisc. _ Graphics contained within this publication are for representation only.

you select On, a pre=recorded

DVD disc immediately starts playing after you insert it into the player (there's no need to press the PLAY button).With AutoPlay On, recordable discs (DVD+R or DVD+RW) with content recorded on them will automatically display contents. Note: For CDs with rap3 or _PEG files on them_ instead of pWaying automatically_ the contents of the CD (the files and/or folders) appear automaticaffy. Screen _ormat: the setdng you choose adiusts the way a movie appears on your TV (DVD discs only). Standard TVs are 4 x 3 format. Depending on the type of television you have, you may want to adjustthe screen setting (also called the aspect ratio).The choices follow: # x 3 Le_;t_erba×- Choose this setting if you want to see moviesin their original aspect ratio (height=to=width ratio).You'll seethe entire frame of the movie, but it will take up a smaller portion of the screenvertically,The movie might appear with black bars at the top and bottom of the screen. # × 3 Standard - Choose this setting if you want the movie to fill the entire scteen of your TV.Thismight meanthat parts of the picture (the left and right edges)won't be seen, Host discsthat are produced in a widescreenonly format can't be cropped in this fashion. 16 x 9 - Choose this setting if your DVD/VCR is connected to a widescreenTV: If you choose this setting and you don't havea widescreenTV:the imageson the screen might appear distorted clueto vertical compression. If you play a disc recorded in 4 x 3 format on a widesc_eenTV_the left and right sidesof the screenwill appear black, Angle _¢an: Some DVDs are produced with multiple camera angles,However, it is difficult to know when the anglefeature isavailablethroughout a movie. If you turn on the Angle Display, an icon will appear on the screenwhenever multiple anglesare availablefor a particular scene in a movie. Ta_e P_ay Ta_e: starts playingthe tape. P_ay from Sea_: Rewindsthe tape to the beginningand starts playback. _y Tape: Allows you to copy the contents of a tape to a DVD+R or DVD+RW disc,The copy will beginfrom the current position on the tape to the end of the _pe, Note:Tapes (movies) that have been encoded with copy-protection cannot be copied to disc. _ee_ew A_B Ed_s:AlJowsyou to reviewA-B Edit segmentsyou created usingtheVCR Info Display(see page35 for more information).Also allows you to playA-B Edit segments, DeCeiVeA-B Ed_s: Allows you to deleteA-B Editsegments, Tape Operant: Tape Au_aP_ay: When you select On,the tape starts pbying automatically after you insert it intoVCR (there's no need to pressthe PLAY button). P_ay'ba¢_ Made: Gives you two options forVCR playback: D_'ft_a_ - Sendsthe VCR content through the digital part of the DVD/VCR, which enablesyou to usetheVCR InfoDisplay during playback(for more information, go to page 35). Ana_a_ - Choose Analogif you want to play a tape and view the picture in true analog format without going through the digital encodeand decode process,which isapplied through the digital path. In the Analog mode, you will not be ableto seethe on-screen Info Displaydesctibed on page35, _uf;aRew_nd: When you select On,the tape automatically starts rewindingas soon asyou reach the end of the tape. Graphics contained wRhin _his publication are for representation only _

The disc library accessesinformation about whatyou've recorded onto discs.Details of this feature and the submenusare described on page3 I,

Timers Timer You canadd timers and view or edit existing timers flora this menu for automatic recording.Timer recordings are especiallyuseful when you havea favorite program that you want to record everyweek and/or every day.If you usea cable box,the cable box must be On and tuned to the channelyou want to record, during the timer recording; if you're recording from satellite, the satellite serotopbox, also called a receive_must be On and tuned to the channelyou want to record. For details about setting up a timer, go to page30. Setup The Setup menu contains manysubmenustha_ are explainedon the following pages.Follow the instructions at the bottom of the screen. Note:To return to a previousraenu, pressthe left arrow button or GO BACK. Parental ControJs You canset up ratings limits and turn on the ParentalControl feature in order to control the type of discspeople can play in the DVD/VCR.The padlock icon on the Loci< menu indicates whether the playeris locked or unlocked, Le¢ked:You need to enter the password in order to play discsthat havea higher rating than what you've allowed.When the player is locked,nobody can accessthe Lock menu without entering the password. Unlocked: No passwordrequired to play discs,Evenif you've set ratingslimits, they won't be enforced when the playeris unlocked. I_otes: The player is shipped unlocked without any rating ffmits set, If yon want to use the Parental Control feature, set Ratings LimKs and then lock the player, Don't confuse the DVDfVCR's Parental Control feature with a pareatal centro_ feature that may be in your T¥, often referred to as V-Chip. The ratings described here refer to discs that you play in the recorder, not TV prograras. Parental Control Lock Lock (and Unlock) I. From the DVD/VCR's main menu,select Setupand pressOK (the Setupmenu items appear), 2. SincePorentdlControlis highlighted,just pressthe OK button (the PdrentdlControlmenu items appear). 3. SinceLock ishighlighted,just pressthe OK button on the remote. 4. If prompted to enter a password, usethe number buttons on the remote control and pressOK (ConfirmPasswnrdappears).Enter the samenumbers you entered before and press OK. 5, To return to the previous menu, pressthe left arrow button. Once the playeris locked,you'll needto enter the passwordeverytime you accessthe PurentdCentrals menu. Note:The player isshipped without any rating limitsset.You need to set Ratings Umits(go to page50 for instructions) in order for the player to prevent people from playingdiscs with certain ratiags. Rating Limits The RatingLimitsmenu lets you determine what types of discscanbe playedin the player,and what types of discswill require a password to override the rating limit that you'veset. In the U.S.,the ratingsfeature isbasedon the ratingsset up by the PIPAA(Notion PicturesAssociation of America) such as R,PG,G, etc, The system ranksthe ratingsfrom I to 8 in order to accommodateratings systems usedin other countries ( ! isconsidered material that is least offensiveand 8 is considered the most offensive), Note: In order for the Ratingsto he enforced, the DYD/VCt_faust be locked and the disc you're playing must contain a movie (or a tit_e) that is rated. _0 Graphics contained within this publication are for representation only.

To set Ratings:

h From the DVD/VCR's main menu,select Setupand pressOK (the Setupmenu items appear), 2+ SincePorentdlControlis alreadyhighlighted,just press OK (the ParentalControlmenu items appear). 3. Highlight RatingLimitsand pressOK (the 8-level rating list appears). 4. Usethe up and down arrow buttons to movethe bar to the rating level you find acceptable. Ratingsthat don't require a password (free access)appear under the bar. Ratingsthat require a passwordappear abovethe ban $. PressOK, Note:Yea must lock the player (page 5@)in order for the ratings to be enforced. Unrated Titles Some discscontain titles (or movies) that don't havea rating assignedto them. Sometimes,moviesyou mightfind the most expfcit are unrated. However, muchof the new programming on discs,such as interviews with actors and directors, is also unrated.Additionall); the discsyou useto record (DVD+R and DVD+RW} are considered unrated. In order to prevent unrated titles from being playe&you need to choose PasswordRequiredfrom the UnmtedTidesmenu,and lock the playen if you want this setting to applyto discsyou recorded (DVD+R and DVD+RW discs),simply highlight the check box next to ApplyDVD+R,+RWand pressOK. System OptNons: Contains settingsand menusfor audiofeatures,aswel! as black levelsettings and dimmer options for the front display of your DVD/VCR. DBgttal Out,put, If you connected your DVDNCR to a receiver via the DIGITAL AUDIO OUT lack on the back of the player,choose the type of receiver (or decoder) you have:Dolby Digital or DTS. Note: If you select DT$,and you don*t have a DT$receber connected to the DVD/VCRyou won't bear any audio or the audio wN be distorted. SR$/TruSurround_ TheTruSurround® feature simulatesa six-speaker listening experience through just two speakers.Thedefault setting isOi/fiToturn on theVirmal Surround®feature highlightSRS/TruSurround, and pressOK. Highfght Onand pressthe OK button. Block Leve_: Adiusts how bright the picture appears.Choose between Dark and Light.Usethe arrow buttons to highlighta choice and pressthe OK button to select the choice that's highlighted. D_mmer: Adiusts the brightnessof the displayon the front of the DVD/VCR. Use the arrow buttons to highight a setting, and the OK button to select the option that's highlighted.The choices follow: Automatic(the display automatica/y dims during playback);Bright;Dim. Audio B_e_d¢_st_, Default setting for type of audio recorded and played.Choices are Stereo,None, SAP(SecondAudio Program). Aui_o¢_e¢_: Keepsthe DVD/VDR's time current by downloading time from broadcast signal.If the DVD/VCRg clock isout of sync andAutoCIock ison, try turning offAutoCfeck and set the time manuallyviathe Clock Setup menu (page 53). S $_(_] Trm urround _ is a trademark of SRS Labs Inc. TruSmTound technology is incoxt_orated under licex_se agreement ii'om SRS Labs Inc. Graphics contained within this publication are for representation only _

you want to record to a disc (DVD) or a tape (VCR),

Recording Quality: The better the quality,the more memory (space) the recording will use on the DVD+R or DVD+RW disc or tape,The choices for a disc are: t Best I hour recording time on an empty 4.7 GB disc 2 High 2 hours recording time on an empty 4,7 GB disc 9 Good 3 hours recording time on an empty 4,7 GB disc 4 Normal 4 hours recording time on an empty 4,7 GB disc $ Basic 6 hours recording time on an empty 4,7 GB disc 6 Low 8 hours recording time on an empty 4,7 GB disc Tope Speed: Choose between SP(Standard Play)or SLP(Super Long Play)setting for recording on tape. $morl_Record: UsedwithTimer Recordingsto ensureyou haveenoughspaceon a DVD+R or DVD+RW disc to record the program.When SmartRecord ison, the DVD/VDR automatically detects how much recording time is left on the disc and adjuststhe Recording Quality automatically if necessary,Does not applyforVCR recordings to rape. Disc Options: Takesyou to Disc Henu options--Autoplay, Screen Format,andAngle Icon,Go to page49 for more information, Tape Opinions: Takesyou toTape Henu options--Autoplay, PlaybackHode, andAutoRewind, Go to page49 for more information, Lengueges: Db'sploy: the languagethat appearswhen you accessthis menu the first time reflects the option you chose during the interactive setup.To changethe languageof the onscreen displays (menus),use the arrow buttons to highlighta languageand pressOK to select it. Audio: the languagethat appearswhen you accessthis menu the first time reflects the option you chose during the interactive setup.Youcan changethe audio languageby highlightingan op'don and pressingthe OK but'ton,The languageselectedwill only apply when i't isavailable on the disc. Subt_tt_les:Some movieson DVD discshavesubtitles. Set up your default settingsin this menu. You canquickly override these settingswhile playinga disc by using the Info Display (goto page4 ! for information). Aut_omot_ic: If the languageyou selectedin the interactive setup isn't availablefor the title you're playing,but subtitles are availablein that language--the subtitles for that language will appearautomatically during playback. Off: subtitles won't appear on the screen, On: if the title (movie) has subtitles _vailable,they will appear automatically, OrJgJnol:subtitle languagewill match the original audio (dialogue) languageof the title (movie). Disc Menu: Manydiscshavetheir own menu that appearson the screen.Youcanselect the languagein which you want the disc menu displayed,in order for your setting to _ke effect, the disc'smenu must havebeen created with the corresponding languageoption. _ Graphics contained within this publication are for representation only.

The submenuscontained in the Inseallationmenu pertain to the type of signalthat is connected to

your DVD/VCR (cableor off-air antenna). If you move,or changeany of the information you entered when you first set up your DVD/VCR, you need to changethe information in the following menus. lnterQctive Setup: The first time you turned on your DVD/VCR, you had to camp{ere an interactive setup so your DVD/VCR could havethe information it needsto function properly. For detailsabout the Interactive Setup,go to page 13.To go through this procedure againto changesettings,highlight InterdctiveSetupand pressthe OK button. Channel Sear€if: If you've changedprogram providers (cableand/or satellite),the Channel Searchwill automatically searchthe signaland put the latest channelsin the DVD/VCR's channel list. Usethe arrow buttons to highlight ChannelSearch,and press OK to begin(a progress indicator appearsto lecyou know how quickly the searchis beingcompleted). Clock Set,up: If the clock isincorrectly set or you skippedthis stepduring the interactive setup,you can set the DVD/VCR's clock using the number buttons on the remote and the arrow buttons to navigate.Fo/ow the on-screen instructions. Note: In order for Timer lecordings to work, you must set the clock to the correct time and date. Cffannel L.tsi_:Enablesyou to changewhat channelsare accessedwhen you pressthe DVD Recorder's channelup and down buttons (if you delete a channelfrom the channel list, you can still accessit by usingthe number buttons on the remote). For more exphnation, go to page 16. Graphics contained within ehis publication are for representaeion only _

most currentoperationa[ information.

page $4

Player won'_ work (locks up)

Try unplugging theAC power cord and plugging it back in. Reset the DVD/VCR: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP button--wait at least 3 seconds before you release both of the buttonsXou'll need to set up your menu preferences because this Reset Procedure returns the DVD/VCR's menus to the factory default settings and also erasesthe contents of the Disc Library, No power Plug in the DVDIVCR_ Make sure both ends of the AC power cord are securely plugged into the Recorder and into an AC outlet. Make sure you've plugged it into a working outlet and/or a power strip that is turned on, Don't plug the unit into an outlet that is operated by a wall switch. No pic_ure Turn on theTV. Tune your TV to theVideo Input Channel that corresponds to the jacks you used to connect theTV to the DVD/VCR (go to page 18for more help) Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position.Try playing the disc again. Hake sure your DVD/VCR is connected properly, If you connected a satellite receiver or a cable box, make sure it isturned on, Press the ANTENNA button, A screen saver oppeors on _he TV Your player is equipped with a screen saverthat appears on the TV after your player hasbeen idle for several minutes.To make it dis@pear, press STOP or CLEAR on the remote. The menu is di@loyed in a foreign languoge The Languagemenu (Display menu) is set to that language,Go to the Setup menu and choose Languages(in Spanish,shown as ldiomas;in French, as Langues)_ choose the Displayoption. Highlight the languageyou prefer, and press OK. I forgo_ my password Press the STOP button on the front of the unit while you press the STOP button on the remote control--keep pressing both buttons for approximately 3 seconds (until the _1 icon disappears fl_omthe front panel display) Releaseboth buttons (the player should be unlocked)If that doesn't work, try resetting the DVD/VCR (instructions are listed below), Reset the DVD/VCR: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP button--wait at least 3 seconds before you release both of the buttonsXou'll need to set up your menu preferences because this Reset Procedure returns the DVD/VCR's menus to the factory default settings and also erasesthe disc library. The _ime (clock) is wrong Go to the SystemOptions menu and select AutoOock. Set it to off and then set the time manually via the Clock Setupmenu, which is found in the Installation menu. DVD P_e_e_s Disc won'_ eject: When you put a disc into the player,the player may take up to IS seconds to read the disc You won't be able to eiect the disc during this time Wait IS seconds and try again. Maybe the Tray Lock feature has been activated_To unlock the disc tray, press and hold the STOP button on the front of the unit and then press and hold the OPEN/CLOSE button on the front of the unit at the same time--wait 3 seconds before releasing both buttons. Disc_rey won't open P1aybethe Tray Lock feature has been activated.To unlock the disc tray, press and hold the STOP button on the front of the unit and then press and hold the OPEN/CLOSE button on the front of the unit at the same time--wait 3 seconds before releasing both buttons. Disc won*_ play Many problems encountered when playing (or recording) a disc are lelated to the "wide variation in disc quality due to the large number of brands and manufacturers.We highly recommend using discs from a reputable manufacturer. If you encounter problems with one brand, please try another brand. Insert a disc with the label side facing up. Check the type of disc you put into the player.This player only plays DVD video discs,Video CDs, audio CDs, and CDs with true rap3 files and/or JPEGfiles. rap3 files that havebeen converted to HPX files (or similar types of files) won't be recognized by your DVD/VCR. Both the DVD/VCR and the disc are coded by region_if the regional codes don't match, the disc cannot be played.This player is Region No. !. Region coding isn't applicable to discsyou use to record (DVDcR and DVD+RW)_ Press STOP (the main menu appears). Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position.Try playing the disc again. If you've put both a DVD in the disc tray and a videotape in theVCR deck, select the Disc menu from the main menu and choose Pby Disc (or press the PLAY button when the menu is highlighted). If you're playing a PluJtisession CD, you might not have closed the session before ejecting it from your computen Close the session and try the disc again. If you're trying to play a DVD+R or DVD+RW disc you recorded in this DVD/VCR in another DVD player,the DVD player may not support DVD+R or DVD+RW discs_Also,if it is a DVD+R disc make sure you finalize it (p_4 I). If you're trying to play a DVD-RW disc, it must havebeen recorded using the video mode (VP1)and it must have been finalized. If it's a DVD+R or DVD+RW disc,check the setdng in the ParentalControlsmenu. Go to Unmted Titles,and see if the box is checked next to Apply to DVD+R and DVD+RW dis_s.If there is a check in the box and you set Unroted Titlesto PasswordRequired,simply highlight the checkbox and press OK.Try to play the disc again, Graphics contained within _his publication are for representation only _

The disc is dirty. Clean it.

Condensation hasformed in the DVD/VCR,AJiow it to dry out. The picture is di$_orted ond/or fuzzy; or _j_*mps_ during disc pIwbocR The disc might be damaged.Try another disc. It is normal for some distortion to appear during forward or reverse scan The disc might be dirty, Clean it (go to page 58 for instructions). Some discs havedefects that cause them to jump from one scene to the next, Turn the PROG SCAN switch on the back of the DVD/VCR to the"off" position.This switch should only be turned on if you've connected the DVD/VCR to a television that uses progressive scanningto display the image,Some, but not all High Definition Televisions (HDTVs) and multimedia monitors use progressive SCan. If you have a progressive scan TV connected, a slight jumping of the signal is normal when you first play a DVD discA more detailed explanation follows: If you have a progressive scan TV connected to the DVD/VCR via the COMPONENT }arks (Y,Pb, Pr) and turned on the PROG SCAN switch, the DVD/VCR automatically switches between progressive scan and regular interlace because progressive scan is only available when you play DVD discs.As the signal is converted from inter{ace to progressive (and vice versa), the Recorder resynchronizes the signal Depending upon yourTV, this resynchronization process might cause a slight"jump" in the picture when you start playing a DVD disc and again when you return to watchingTVi No sound or dis{orted sound Make sure your player is connected properly, Make sure all cables are securely inserted into tile appropriate jacks. You may need to readjust the Digital Output setting (from the SystemOptions menu), Go to page SI. If you select DTS, and your DVD/VCR isn't connected to a DTS-capabie receiver, you won't hear any sound, or the sound wiJJbe distorted Turn your TV to itsVideo Input Channel (go to page 18). Sound is muted when you're using search features (fast forward, reverse, fl-ame advance, etc.). If you connected an audio receiver to your DVD/VCR, make sure you chose the correct input setting on the receiver. Can'_ advance _hro_gh o mov_e You can't advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to prohibit that action. Sub{i{Je ond/or oudio Jong_oge is no* {he one seJec{ed from {he in*{ioJ ge_;{ing If the subtitle and/or audio language does not exist on the disc, the disc's priority language will be selected instead. Set the subtitle and/or audio language manually through the Info Display or the DVD/VCR's menu system. P_aydoesn'_ beg_n The rating of the title on the disc exceeds the rating limit set in the Ratings Limits menu, Unlock the player and/or changethe rating limit in those menus. Go to page S0 for more information. No for_ord or rever_e scan Some discs havesections that prohibit rapid scanning,or title and chapter skip. If you're trying to skip through the warning information and credits at the beginning of a movie, you won't be able to,This part of the movie is often programmed to prohibit skipping through it. Desired ong_econno_ be changed Host discs don't havethe multi-camera angle system, and some discs only have multiple angles during certain parts of the movie, Change the Screen Format in the menu system. Go to page 49 for more information. Picture is _oo shor_ ond verde Change the Screen Format in the menu system. Go to page 49 for more information. b_sc_recorded won'_ pgoy in another DVD p_oyer If it's a DVD+R disc, make sure you finalize the disc (p 33). Some DVD players won't play DVD+R and/or DVD+RW discs. Check the DVD player's manual Rec@ 'dingiCopying P 'obJems No_ enough spoee on {he DVD+R or DVD+RW d_sc To get more recording time, you can change the Recording Quality setting (page 52). If it is a DVD+RW disc, you can delete some titles to create more space. V¢O_ record You can't record content that is copy-protected, If a messageappears notifying you that you can't record the materiaJ, press CLEAR on the remote to remove the message from the screen. Make sure you've inserted a DVD+R or DVD+RW disc Make sure the disc isn't Jacked, which protects contents of disc but prevents recording_ Go to page 48 for more information Many problems encountered when recording (or playing) disc are related to the wide variation in disc quality due to the large number of brands and manufacturers.We highly recommend using discs from a reputable manufacturer, If you encounter problems with one brand of disc, please try another brand. Press the DVD's RECORD button on the front of the DVD/VCR.The remote control's RECORD button activates recording on the part of the DVD/VCR selected in the Recording Options menu (Tape or Disc) You can changethe selection (page 52), _ Graphics contained within this publication are for representation only.

The followingrecommendations can't be taken as a guarantee that the DVD/VCRwill playrap3 recordings, or as an assurance of sound quality.Certain technologies

and methods for rap3 file recording on CD-R discs prevent optimal playbackof these flieson your product. Hake sure the file is a true rap3 file.Youcan only playtrue HP3 files inthe DVD/VCR--some products use software to compress rap3 fliesand convert them to other formats such as HPX.Your DVD/VCRwon't recognize or playHPX filesor other types of converted rap3 files. When namingrap3 flies,don't exceed 12characters, and enter .rap3 as the file extension_When usinga general name format of:Tide.rap3, make sure the title is 8 characters or less,don't use spaces,and don't use special characters (such as, = +,/, %,&,etc.). Whatever the real recording capacity of the CD-R,don't use more than 630HB of recording space on the disc_ Use a decompression transfer *-ateof at least i28 kb/sec (kilobits/second) when recording rap3 flies_Sound qualitywith rap3 files basicallydepends on the rate of compression you choose_Getting audio CD qualitysound requires an analog/digitalsampling rate, that isconversion to rap3 format, of at least 128 kb/sec and up to 160kb/sec. However; choosing higher rates like 192kb/sec or more, only rarely give even better sound quality.Conversely,fileswith samplingrates below 128 kb/sec won't be played. Cen'_ ge_ _a DVD/VCR_s main mena Press the STOP button until the main menu appears or press the left arrow button to return to the previous menu.Ifthat doesn't work, remove the rap3 disc #am the disctray. Can't make {he Infa Display appear The Info Displayisonly availablewhen playingDVD discs,VCRtapes usingthe digitalpath,Audio CDs,Video CDs, and watchingTV VCR ProMems No picture or _a_/ p_c_re Turnon theTV Checkthe PROGSCANswitchon the backof the unitto makesure it isin the OFFposition. Hake sureyour DVD/VCRisconnectedproperJy_ If youconnectedasatellitereceiveror a cablebox,makesure it isturned on_ Somesnow or streaksale normalduringsearch,stopaction,frameadvance,andslow-morionplayback. Adjustthe tracl

You might be in the wrong mode.To

operate your DVD/VCR, press the DVD/VCR button on the remote before you press any other buttons. If you're operating the T_] press the TV button first, etc. (this remote operates most RCA, GE, and Proscan TVs and satellite receivers, and you can program it to operate other brands of televisions). Insert new batteries in the remote. Operate the remote control at a distance of no more than 20 feet. Remove any obstacles between the remote and the DVD/VCR or other component. If your DVD/VCR is in an entertainment cabinet, the glass doors might obstruct the remote control from operating the DVD/VCR. Open the doors. Cen'_ program the remo_e The universal remote control that came with your DVD/VCR is already programmed to operate most RCA, GE, and Proscan componentsi_'ou can program it to operate many other brands and models of TVs, cable boxes, digital satellite receivers, audio components, etc. However, the remote doesn't support all brands and all models so there is a possibility the remote can't be programmed to operate your component. Instructions for programming the remote control are on page 2 I If you're trying to program the AUX button, you must use the Direct Entry method, NOT the Automatic Code Search method, Los_ the remo_e control To order a new remote control, go to page 6O.The buttons on the front of the DVD/VCR operate the DVD/VCR's basic functions, but you won't be able to use the menu system without the remote control.The buttons on the front of the unit are described on page 7.Also, if you have another RCA, GE, or Proscan brand product with a remote control that has a DVD button, some of the buttons will probably operate this product if you press the DVD button first. Hand|ing Cautions Before connecting other components to this DVD/VCR, be sure to turn all components off. Don't move the playerwhile a disc is beingplayed.The disc m_yget scratched or broken_and the player's internal parts may be damaged. Don't put anycontainer filled with liquid or any small metal objects on the DVD/VCR, Don't put your hand into the disc tr@ Don't placeanything other than the disc in the disc tray, Exterior influencessuch aslightning and static electricity canaffect normal operation, If this occurs,turn the unit off and on againwith the STANDBY.ON button, or disconnect and then reconnect the AC power cord to the AC power outlet.The unit should operate normally. Be sure to remove the disc and turn off the playerafter use, Maintenance of Cabinet For safety reasons,when cleaningthe cabinet be sure to disconnect the AC power cord from the AC outlet. Do not usebenzene,thinner, or other solvents for cleaning. Wipe the cabinet with a soft cloth, Format:ion of Condensation Due to sharp changes in temperature and humidity, condensation may form ifwarm air comes in contact with any cold parts inside the playen When condensation forms insidethe player,the playermay not operate correctly, If this occurs_leavethe playerat room temperature until the insideof the player becomes dry and operational. If condensation forms on a disc,wipe the disc with a soft, dry cloth by moving the cloth from the center hole toward the outer edge, Handling Discs Don't touch the disc'ssignalsurfaces,Hold by the edgesor byone edge and the hole in the cente_ Don't affix labelsor adhesivetape to label surfaces.Don't scratch or damagethe label. Do not usedamaged(cracked or warped) discs. _ Graphics contained within this publication are for representation only.

One year from date of purchasefor parts and labon

The warranty period for rental units begins with the first rental or 45 daysfrom date of shipment to the rental firm, whichever comes first, what we will do: PayanyAuthodzed RCA Service Center the laborchargesto repair your DVD/VCR, PayanyAuthorized RCA Service Center for the new or,at our option_refurbished replacement parts required to repair your DVD/VCR, How you get service: Takeyour DVD/VCR to anyAuthorized RCA Service Center To identifyyour nearestAuthorized RCA ServiceCenter, askyour dealer,look in the Yellow Pages,or call I-800-336=1900, Proof of purchasein the form of a bill of sale or receipted invoice which is evidencethat the product is within the warranty period must be presented to ob_in warranty service.For rental firms, proof of first rental is also required. Pick up your DVD/VCR when repairs are completed, What your warranty does not cover: Acts of nature, such as but not limited to lightning damage, Adiustment of customer controls, Damagefiom misuseor neglect, A unit that hasbeen modified or incorporated into other products or isused for institutional or other commercial purposes, Batteries. Units purchased or serviced outside the U.S.A, Product Registration: Pleasecomplete the online Product Registration on RCA,com or complete and rnaiJthe Product R%istradon Card packedwith your unit, It will make it easierto contact you should it ever be necessary.Thereturn of the card is not required for 'warranty coverage, Limita1:Jon of Warranty; THEWARRANTY STATEDABOVE ISTHE ONLY WARRANTY APPLICABLETO THIS PRODUCT.ALL OTHERWARRANTIES, EXPRESSOR IHPLIED (INCLUDING ALL IMPLIEDWARRANTIES OF HERCHANTABILITY OR FITNESSFORA PARTICULARPURPOSE)ARE HEREBYDISCLAIHED.NOVERBAL ORWRITTEN INFORMATION GIVEN BYTHOHSON INC., ITSAGENTS OR EMPLOYEESSHALL CREATEA GUARANTY OR IN ANYWAY INCREASETHE SCOPEOFTHIS WARRANTY, REPAIROR REPLACEMENTAS PROVIDED UNDERTHISWARRANTY iSTHE EXCLUSIVEREHEDYOFTHE CONSUHER.THOHSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGESRESULTINGFROMTHE USEOFTHIS PRODUCT ORARISING OUT OFANY BREACH OFANY EXPRESSOR !PIPLIEDWARRANTY ONTHIS PRODUCT,THIS DISCLAIHEROFWARRANTIES AND LIHITED WARRANTYARE GOVERNED BYTHE LAWS OF THE STATEOF INDIANA. EXCEPTTOTHE EXTENT PROHIBITED BYAPPLICABLE LAW,ANY IHPLIEDWARRANTY OF HERCHANTABILITY OR FITNESSFORA PARTICULARPURPOSEON THIS PRODUCT ISLlblITED TO THEAPPLICABLEWARRANTY PERIOD SETFORTHABOVE, How state law relates to warranty: Somestates do not allow the exchsion nor limitation of incidental or consequential damages,or limitations on how longan implied warranty lasts,so the above limitations or exclusions may not apply to you. This warranty givesyou specific levi rights,and you also mayhaveother rights that vary from state to state. If you purchased your product outside the |Jnited St:ares: Thiswarrantydoesnotapply,Seeyourdealerfor warrantyinformation. Graphics contained within this publication are for representation only _9

There arevarious accessoriesavailableto complement your DVD/VCR, P_¢es are subject

te change witheut notice. AH accessories are subject to avaimabifft_ A shippingand handlingfee will be chargedupon ordering, and we are required by law to collect the appropriate salestax for eachindividual state, country, and locality to which the merchandiseisbeing sent, For more information about ac¢essories_ go on-line to w_w,rca,cem Optical Plug to Optical P_ug for Optical Audio cermet€ion to a compatible receiver, 3 feet (part nurnber DV3)I price $ R5,95 6 feet (part number DV6); price $ R9,95 Optical Plug to Hi_i P_u_ feet. (part n_r_ber DV$H)I price $ B5,95 _ee_ (part n_ber DV_H)I price $ _9,95 Surge Protector (part _ber SCTV4000¢); price $49,95 o ddd dd_ o ddd 'E d% °° part _ur_ber _ i 3871 $2.3, _0 Hew Order To place an order by phone,haveyourVisa, HasterCard, or Discover Card ready and call the toll-free number listed below, Use this number only to place an order for accessory items. _-8e0_338_0376 _0 Graphics contained within this publication are for representation only.

Please do not send any products

to the indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson |nc° m0330 North Meridian Street IndianapoHs_ iN 46:Z90 @I_004 Thomson Hnco Trademark(s) @ R÷gistered Ma_'ca(s) R÷gistraaa(s) Print÷d in China TOCOM m64m3540 THOMSON _

Other DVD VCR Combo Manuals