RCA IP110 Operation Manual

conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference). • Reorient or relocate and increase the separation between the telecommunications equipment and Receiver. • Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful boOKlet, “How To Identify and Resolve Radio/TV Interference Problems.” This boOKlet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies. Warning: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The RCA IP110 phone is dedicated to business environment use. It is a full-featured and a flexible SIP solution. It is compatible with most IP PBX and VoIP providers. Please read through the administrator’s guide before installing your phone. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or oper- ated in conjunction with any other antenna or transmitter.” This is a class B device, in a domestic environment; this product may cause radio interference, in which case the user may be required to take adequate measures. To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electri- cal and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted munici- pal waste and have to collect such WEEE separately.

Getting Started 5 Packing List 5 Assembling IP110 6 Configuration and Registration 7 Basic Configuration via Web Page 7 Account Settings 8 Basic Configuration using phone keypad 9 Overview 11 LEDs 12 Icons 12 User Interface 13 User levels 15 Administrator Mode 15 Reboot 16 Customizing Your Phone 16 General Settings 16 Phone Status 16 Time and Date 17 Keypad Lock 18 Audio Settings 18 Volume 18 Ring Tones 19 Codec Selection 19 Contact Management 20 Edit/Add/Delete Contacts 21 Basic Call Functions 23 Outgoing calls 23 Call Devices 23 Call Methods 23 Send Key configuration 24 Hot Line 24 Anonymous call 25 Dial Plan 26 Incoming calls 27 DND 28 Call Forward 28 Auto Answer 29 Call log 30 Accessing Call log 30 Accessing Missed Calls list 30 Accessing Dial Calls list 30 Call list items management 30 During an Active Call 31 Mute 31 Call Hold 31 Call Waiting 31 Handling a waiting call 31 Call Waiting Configuration 32 Call Transfer 32 3-way Conference 33 Voicemail 33 Voicemail settings 33 Retrieving your Voicemail messages 33 Advanced Functions 34 Account Setting 34 Network Settings 35 Advanced Network Settings 35 VLAN 35 HTTPS 36 802.1X 36 Reset to Factory 36 Firmware Update and Autoprovisioning 37 Decryption 37 System Export 38 Keys configuration 38 Send Key configuration 38 Programmable keys 39 Line keys Configuration 40 Line 40 Speed Dial 41 Confernce 41 Forward 41 Transfer 41 Hold 42

DND 42 Call Return 42 Pick Up 42 Call Park 43 Voice Mail 43 Prefix 43 Redial 43 Trouble shooting 44 Appendix A. 46 Line Key configuration menu 46 Memory Key configuration menu 47 Service 48 Warranty 49

your package: IP110 Handset & Handset Cord AC Adapter Ethernet Cable Quick Start Guide Setting up your IP110 This section introduces how to set up the phone with the components in the packing list: Connecting the Handset Cord Connecting to the Network and Power. Connecting the Handset and Headset (not included) Getting Started