RCA RLED4250A Instruction Manual

Introduction 1. Front View 2. Rear View 4. Remote Control Basic Operation OSD Menu 1. Picture menu 2. Audio menu 3. Time menu 4. Setup menu 5. Lock menu 6. Channel menu Simple Troubleshooting 2 3 4 5-9 5 6 8-9 10 11-17 11 12 13 14 15 16-17 18 19-20 Contents 3. Instruction for Wall Mount 7

to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Correct disposal of this Product (Waste Electrical & Electronic Equipment (WEEE) Your product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end- of-life should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/ recycling centre. In the USA there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in! This unit complies with America Safety directives. This unit complies with FCC directives. CERTIFIED TO CSA STD. C22.2 No.60065 3124140

INPUT VOL+ VOL- EXIT MUTE MENU OK CH+ CH- 1 2 3 4 5 6 7 8 9 0 -/-- FAV CC EPG MTS Unit and Accessories Unit and Accessories Instructions for fixing stand Instructions for fixing stand Warranty Card

1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off. Indicator on(Red) Standby mode Indicator on(Green) Power on mode 2). The functions of the buttons: INPUT: Press to display the input source menu. MENU: Press to display the OSD menu, press again to exit the menu. CH+/-: Press to scan through channels. VOL+/-: Press to adjust the volume. POWER: Turn on/standby the TV set. The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 30 0 to the left or right side and 20 0 above or below the remote control window. Press INPUTbutton on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or / button on remote control to select the input source, press OK button on the remote control to enter. Note: Before you select the input source, make sure the connections are prepared. TV AV Component HDMI1 HDMI2 HDMI3 VGA INPUT MENU CH+ CH- VOL+ VOL- POWER Led Indicator Remote Control window (Keep clear)

Headphone out : Connect it to your headphone or other audio equipments. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal. COAX : Digital coaxial output. : Connect it to the HDMI of DVD or other equipment. HDMI1/2/3 YPbPr : Connect them to the video output terminal of DVD. VIDEO : Connect it to video output terminal of DVD. L/R-in : Connect them to audio output terminal of DVD. (shared with YPbPr) Service : For service use only. AC POWER IN: Connect to an earth 100-240V~ 50/60Hz outlet with the Power Cable. HDMI1 HDMI2 HDMI3 Service AC POWER IN VGA COAX VIDEO R-IN L-IN PC audio in RF Y Pb Pr Headphone out

- - Do not mount your RCA TV at more than a 15 degree tilt. - Always use two people to mount the TV to a wall. - Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. The wall mount kit (not included) with your purchase allows you to mount your RCA TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. RCA is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting. - 4 pcs of type M5 screws are required for installing the wall mount bracket to your RCA TV. Do not use screws that are longer than 15 mm. Screws that are too long may cause damage to the inside of the TV set. - Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal injury. RCA is not liable for these kinds of incidents Dimensions for Mounting Hole Pattern This RCA TV is compatible with a 200mm x 200mm mounting hole pattern. Introduction 200mm 200mm

The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote control may not work correctly if it is operated out of range or out of angle. CC: Press to display the closed caption. MTS: Press to select the audio channels. FAV: Press to add or remove favorite channel. EPG: Press to enter the EPG menu directly. DISPLAY: Display the information of current mode. Thumbstick( ): Allows you to navigate the on-screen menus and adjust the system settings to your preference. OK: CONFIRM button. MENU: Press to display the OSD menu. EXIT: Press to exit the OSD menu. MUTE: Press to mute the sound, press again or press VOL+ to unmute. VOL+/-: Press to adjust the volume. CH+/-: Press to scan through channels. SLEEP : Shutdown timer. Number Buttons: Choose channel directly. Select channel 5, Press button "5"; Select channel 62, Press button "6", then press button "2" in 2 seconds; Select channel 151, Press button "1", and press button "5" in 2 seconds, and press button "1" in 2 seconds; Select channel 5-1, Press button "5", and press button "- / - -" in 2 seconds, and press button "1" in 2 seconds; PICTURE: Press repeatedly to cycle through the available video picture modes. SOUND: Press to cycle through the different sound settings. PICTURE SOUND SLEEP DISPLAY INPUT VOL+ VOL- EXIT MUTE MENU OK CH+ CH- 1 2 3 4 5 6 7 8 9 0 -/-- FAV CC EPG MTS (RETURN): Return to the previous channel viewed. POWER(red button): Turn the TV on/standby. INPUT: Press to display the input source menu. Universal Remote Code:11359 Universal Remote Control not included.

2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 30 feet(7m) and 30 0 to the left and right of the IR receive at the front of the LED TV. - Used batteries should be disposed properly.

10 Power on/off 1. -To turn on the Switch Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display input source menu, and use CH+/- button on the TV set or ġĢbutton on remote control to select the input source, press OK button on the remote control to enter. Note: Before you select the input source, make sure the connections are prepared. Basic OSD Menu operation Use / ġ / Ģ ġ Ģ Ģ button to select the main menu, and press button to enter the submenu. In the submenu, use / Ģ ġ Ģ or press button to enter the submenu. * (Press MENU button to return to the upper menu.) * (Press EXIT button to exit the menu display.) Note1: Only when you input the suitable signal, the relevant items can be activated Note2: Please operate the OSD menu according to hint on the bottom of the banner. Main menu Picture Audio Time Setup Lock Channel Submenu (Setup menu for example) Hint---you should operate the OSD menu according to the hint. Press MENU button to display the OSD menu as below: Basic Operation TV AV Component HDMI1 HDMI2 HDMI3 VGA

Description Picture mode: Select between Standard, Dynamic, Mild, SportsˈUser and Power Saving. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Set the amount of fine detail in the picture. Color Temp.: Select between Normal, Cool and Warm. Note: when select the "Power Saving", the machine is in energy-saving status. OSD Menu

Description Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequency intensity. Treble: High frequency intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. SPDIF Type: Allows you to select between PCM and RAW. Audio Language: Select audio language. Setup Lock 12 6 Time Channel Sound Mode Bass Treble Balance Surround SPDIF Type Audio Language Flat English Move Select Exit MENU 50 50 50 Off PCM Picture Audio OSD Menu

Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly. OSD Menu

Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Clock, Phase or even perform an Auto adjustment. Closed Caption: CC Mode: Allow you to select the CC Mode among: On, Off and CC on Mute. Basic Selection: Allow you to select the basic selection among: CC1, CC2, CC3, CC4, Text1, Text2, Text3 and Text4. Advanced Selection: Allow you to select the advanced selection among: Service1, Service2, Service3 Service4, Service 5 and Service 6. Option: Use thumbstick buttons to operating in option menu as your desire. XVS: Activate/deactivate the automatic dynamic brightness function. Restore Default: Restore all settings in SETUP menu to factory settings. OSD Menu

You must enter the password to gain access to the Lock menu. The default password is 0000. You may modify the following options: Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. System Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don’t work. This option menu allows you to lock any TV channel or adjust the Movie rating filter. US: TV: Use buttons to select the desired rating and press button to block or unblock rating. MPAA: The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America (MPAA) as broadcasted on cable TV and not edited for television. Use button to select N/A, G, PG, PG-13, R, NC-17 or X. ġ  Ģ ġ  Ģ Ģ Canada English: Select among: E, C, C8+, G, PG, 14+ and 18+. Canada French: Select among: E, G, 8ans+, 13ans+, 16ans+ and 18ans+. G: General Audiences. Movie is appropriate for all ages. PG: Parental Guideance Suggested. May contain material not suited for younger viewers. PG-13: Contains content that may not be appropriate for viewers under the age of 13. R: Restricted. Contains adult content, no one under 17 admitted without parent. NC-17: No one 17 and under admintted. X: Adults only. Canada: Reset RRT: Allow you to reset the RRT setting. OSD Menu

Air/Cable: Allow you to select antenna between Air and Cable. If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. If you select “Cable” as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use button to highlight the “Start to Scan”, then press button to search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU to stop. ƾ Ģ Ģ ƾ Ģ If you select “Air” as input signal in Antenna item, you can press button to search the channels automatically. The receivable channels will be stored automatically. When searching channels, press MENU to stop. NOTE: It will take a while to auto scan in NTSC or ATSC mode, please wait patiently. Use / button to highlight the desired item, then press OK button to add or remove the highlighted channel as favorite. Ģ Ģ Favorite: Allow you to add these channels which you desired as the favorite channels. OSD Menu

Channel Label: Allow you to setup a label for the channel. Press / button to select the position of the table, and press / button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, Bad. 17 Show/Hide: Allow you to show or hide the channels. Use / button to highlight the desired item, then press OK button to show or hide the highlighted channel. Ģ Ģ Ģ Ģ Ģ Ģ OSD Menu

with the following instructions.Remember to check the peripherals topinpiont the source of the failure. If the display still fails to perform as expected,connect your helpline for assistance. No power - Check all connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power is on. - Ensure that the aerial is connected. - Try a different programme. Poor picture quality - Check the aerial connections. - Check that the channel is tuned in properly. - Adjust the picture settings:brightness,colour,sharpness,contrast,hue. - Make sure that the TV is not located close to electrical appliances that may emit radio frequency interference. No colour - Adjust the colour setting. - Check that the programme is broadcast in colour. - Check that the cannel is tuned properly. TV does not respond to remote control - Check that there are no obstructions between the remote control and the unit. - Check that the remote control is within range of the unit. - Check that the batteries in the remote control and not weak or exhausted. This LED TV is for household use and registered as harmless on electromagnetic waves. Therefore,you can use it in every location as well as residential areas.

H: 30-75KHz V: 56-75Hz impedance 300 cd/m 2 0.7Vp-p@75ohm NTSC 3000:1 1920x1080 Max 1920X1080@60Hz M, J, 4.43. ATSC/NTSC Brightness Signal Video System Contrast Resolution MODE Sound * Product specifications and appearance are subject to change without notice. Technical Specifications ATV DTV Impedance 75 Bandwidth 6MHz Modulation ATSC:8VSB QAM:64QAM, 256QAM Video System MPEG 2 MP@ML Sound System MPEG 1/ layer 1/AC-3 AV Color system PAL/NTSC/SECAM Video 1Vp-p@75ohm Audio 500mV rms YPbPr Video Y:1Vp-p@75ohm,PbPr:0.7Vp-p@75ohm Audio 500mVrms Format Max. 1080P HDMI Video Standard TMDS Format Max. 1080P 2 X 8W @ 8ohm Amplifier CLASS D System

VGA FORMAT MODE HDMI FORMAT MODE Format Resolution Hor.Freq(KHz) Vert.Freq(HZ) 480i 480 15.734 60 480p 480 31.465 31.500 59.94 60 576i 576 15.625 15.734 50 576p 576 31.250 50 720p 720 44.955 60 1080i 1080 28.125 33.750 50 60 1080p 1080 56.250 67.500 50 60 Resolution Refresh Rate Z H K 5 . 5 5 Z H 0 6 1366X768 1920X1080 Z H K 9 . 9 5 Z H 0 6 Z H 0 6 Z H 0 6 Z H K 74 Z H K 74.6 Z H K 4 . 8 4 Z H 0 6 70HZ 56.5KHZ 1024X768 Z H K 0 . 0 6 Z H 5 7 Z H K 9 . 7 3 Z H 0 6 Z H K 2 . 7 4 Z H 0 7 800X600 Z H K 9 . 6 4 Z H 5 7 Z H K 5 . 1 3 Z H 0 6 Z H K 9 . 7 3 Z H 0 7 640X480 Z H K 5 . 7 3 Z H 5 7 720X400 Z H K 5 . 1 3 Z H 0 7 20