GE AJEQ10DCD Specifications

area are calculated by the Association of Home Appliance Manufacturers’ standards. AJEQ10DCD GE® 230/208 Volt Window/Wall Mount Heat and Cool Unit Wall Case Dimensions and Installation Information (in inches) Listed by Underwriters Laboratories For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Specification Created 9/09 390365 Note: When installing slide-out chassis units in through-the-wall applications, keep louvers free. Do not restrict air flow areas. Perpendicular 230/208V 20 Amp AJCQ12DCD Premium, Deluxe and Value Model Wall Case Dimensions (in inches) Note: When installing units in through-the-wall ap Do not restrict air flow areas. 15-5/8 26 16-7/8

area are calculated by the Association of Home Appliance Manufacturers’ standards. AJEQ10DCD GE® 230/208 Volt Window/Wall Mount Heat and Cool Unit Wall Case Dimensions and Installation Information (in inches) Listed by Underwriters Laboratories For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Specification Created 9/09 390365 Installation Information: A finished opening of 26-1/8" x 15-3/4" clear of intrusions is required. Keep clearance of 4" from side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields. Note: Units should be caulked on all four sides of case to the building exterior to assure building integrity. Two Wall Cases for Tenant Option Installation When the air conditioner is offered as a tenant option, these wall cases provide protection against outside elements. RAB47 – includes wall case, exterior grille and steel closure panels. RAB48 – includes wall case, exterior grille, steel closure panel and two layers of insulation. Standard Wall Case RAB46 Solid-sided wall case fabricated of galvanized steel with baked enamel finish. Welded areas are coated with a sealing compound to help resist rust and corrosion. Polymer gasket surrounds opening to assure tight weather seal. Aluminum grille (RAG13) is included. Panels on interior and between case and grille provide weather protection prior to installation of chassis. Provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields. Built-in RAC Installation . 1-G003 pg. 138) April 30.1993 Make frame if desired or caulk between case and siding 15-3/4 26-1/8 Frame Construction Brick Block and Brick Frame Construction Fill open cells with mortar or insulation 15-3/4 26-1/8 Lintel Lintel OUTSIDE INSIDE 16-7/8 Caulking Drip Rail Trim Molding (if desired) Plaster Line n Room Air Conditioners Opening for RAB36/37/38 Case hed opening of 26-1/8" x 15-3/4", clear of ons, is required. Keep clearance of 4" from alls. Brick veneer or frame walls should have studding surrounding case to provide firm ring with screws. Case can be fastened directly k or block walls with screws sunk in lead sion shields. Flexible Mounting Position Built-in RAC Installation ub. 1-G003 pg. 138) April 30.1993 Make frame if desired or caulk between case and siding 15-3/4 26-1/8 Frame Construction Brick Block and Brick Frame Construction Fill open cells with mortar or insulation 15-3/4 26-1/8 Lintel Lintel OUTSIDE INSIDE 16-7/8 Caulking Drip Rail Trim Molding (if desired) Plaster Line lt-In Room Air Conditioners all Opening for RAB36/37/38 Case nished opening of 26-1/8" x 15-3/4", clear of usions, is required. Keep clearance of 4" from e walls. Brick veneer or frame walls should have od studding surrounding case to provide firm horing with screws. Case can be fastened directly rick or block walls with screws sunk in lead ansion shields. Flexible Mounting Position 15-3/4 26-1/8 Frame Construction Brick Block and Brick Frame Construction Fill open cells with mortar or insulation 15-3/4 26-1/8 Lintel Lintel OUTSIDE INSIDE 16-7/8 Caulking Drip Rail Trim Molding (if desired) Plaster Line side walls. Brick veneer or frame walls should have wood studding surrounding case to provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields. Flexible Mounting Position

area are calculated by the Association of Home Appliance Manufacturers’ standards. AJEQ10DCD GE® 230/208 Volt Window/Wall Mount Heat and Cool Unit Listed by Underwriters Laboratories For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Specification Created 9/09 390365 Features and Benefits • R-410A Refrigerant • 10,400/10,200 Cooling BTU • 11,600/9,500 Heating BTU • 9.4/9.4 EER • 230/208 Volts • Electronic controls with remote • Electronic digital thermostat • Four-way air direction • Up-front, washable air filter • 2 cool/2 heat/2 fan only speeds • Remote thermostat capable • Unit dimensions: 14-7/8"W x 24-3/4"H x 19-7/8"D • Model AJEQ10DCD – Soft Gray AJEQ12DCD