RCA M29400 Operation & User’s Manual

to read this manual before operating this unit for the first time. TOCOM 15257750 C O

shock hazard, do not expose this TV to ram or moisture. RISK OF ELECI_IC SHOCK DO NOT OPEN i TO REDUCETHE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. If fixed (non-moving) images are left on the screen for long periods, they may be permanently imprinted on the screen. Such images include network logos, phone numbers, and video games. This damage is not covered by your warranty. Extended viewing of channels displaying these images should be avoided. Cable TV Installen This reminder is provided to call your attention to Article 820-40 of the National Electrical Code which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. i \

Important Information- Warning Quick Guide to Your TV Startup 2-3 Hook up, Plug in TV, Put Batteries in the Remote, Turn on the TV, Place Channels into Memory, Set the Time Basic Tour of the Remote 4 Basic Button Layout and Functions Menu Basics 5 Colors, Menu Buttons, Moving through, the Menus Using Your TV and Remote With Remote Buttons With VCRs With a Satellite Receiver With a Cable Box With a Laserdisc Player With Audio Equipment 6-7 8-10 11 12-13 14 15 Adjusting Your TV Overall Picture 16 Picture Settings 17 Color, Tint, Brightness, Sharpness, Autocolor, Picture Reset Sound Settings 18-19 Stereo, Expanded Stereo, SAP, Tone, Speakers Using Advanced Features Placing Channels in Memory/Autoprogra.m Adding and Deleting Channels in Memory Naming the Channels Setting the Sleep Timer Setting the Alarm Clock Selecting a Language Watching ClosedCaptioning Setting Your TV for Antenna or Cable 20 21 22 23 24 25 26 27 References Front Panel Buttons Displays on the Screen Trouble Checks 30 31 32-33

Startup The steps below will get your TV connected and ready for watching. For more details, see the page numbers listed. 1. Hook up your TV Details are in the Connections Guide. Hook u.p any antennas, cables or other equipment to your TV before you follow the steps below. 2. Plug in the TV For Model M29400: Plug the cord into the outlet, matching the wide and the small end of the plug with the outlet. For Model C29400: A. Plug cord into adapter as shown at the left. B. Plug the adapter into the outlet, matcl_ng the prongs with the outlet. 3. Put Batteries in the Remote 2 A. Pull off the cover of the ba.ttery compartment. B. Place the batteries, matching the + and - end of each battery the compartment. C. Replace the cover.

Startup 4. Turn on the TV %pw 'O 20 30 'O sO'O 70 'O 90 Press TV on the remote. OR Press POWER on the TV. 5. Place all available channels in memory (Autoprogram) Details for adding and deleting channels are on page 21. Controls Alarm Ad 13 A. Press MENU.PROG until the Setup :menu is selected. This menu is white. B. Press MOVE • to start placing channels in the TV's memory. C. Wait _cmtilTV has cycled through all the channels and returns to original channel. 6. Set the Time 12:21 AM 13 A. Press MENUoPROG until the Alarm. menu is selected. This menu is green. B. The Clock is automatically highlighted the first time you set it. If it is not, press MOVE • (down) to highlight it. C. Press MOVE • to set the hour. D. Press MOVE • to set the minutes. 3