Sharp LC-20B2UA Operation Manual

LC-20B2UA ENGLISH Printed in Japan Imprimé au Japon TINS-7604CEN1 02P01-JKK Printed on post-consumer recycled paper. Imprimé sur du papier recyclé. FRANÇAIS TÉLÉVISEUR COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) OPERATION MANUAL MODE D’EMPLOI MENU A

OPERATION MANUAL ENGLISH ENGLISH IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of impor- tant operating and maintenance (servicing) instructions in the literature accompanying the product.

not expressly approved by the manufacturer could void the user’s authority to operate this equipment. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.” IMPORTANT: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. U.S.A. ONLY Model No.: Serial No.: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. U.S.A. ONLY This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org

Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precau- tions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD color TV product, please read the following precautions carefully before using the product. I Read instructions—All operating instructions must be read and understood before the product is operated. I Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future reference. I Observe warnings—All warnings on the product and in the instructions must be observed closely. I Follow instructions—All operating instructions must be followed. I Attachments—Do not use attachments not recommended by the manufacturer. Use of inad- equate attachments can result in accidents. I Power source—This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another power source, refer to the operating instructions. I Power cord protection—The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. I If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a SHARP service center or your dealer. I Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. I Entering of objects and liquids—Never insert an object into the product through vents or open- ings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product. I Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous conditions. Request a qualified service person to perform servicing. I Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a.When the power cord or plug is damaged. b.When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d.When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e.When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. I Replacement parts—In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same character- istics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. I Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. I Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. I Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product. IMPORTANT SAFETY PRECAUTIONS (Continued) I Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. I Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. I Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manu- facturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. I When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. I Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause over- heating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instruc- tions are followed. I The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. I Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

I If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of antenna-discharge unit, connection to grounding elec- trodes, and requirements for the grounding electrode. I An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ELECTRIC SERVICE EQUIPMENT NEC—NATIONAL ELECTRICAL CODE GROUND CLAMP EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE I For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5 SUPPLIED ACCESSORIES ............................................................................................................. 7 PREPARATION............................................................................................................................8-10 Using the Remote Control ......................................................................................................... 8 Batteries for the Remote Control .............................................................................................. 8 Power Connection ...................................................................................................................... 9 Antenna Connection .............................................................................................................9, 10 FRONT AND REAR CONTROL OPTIONS ............................................................................. 11-13 Removing the Back Cover ....................................................................................................... 13 Listening with Headphones ..................................................................................................... 13 REMOTE CONTROL ...................................................................................................................... 14 BASIC OPERATION ................................................................................................................. 14-17 Turning on POWER................................................................................................................... 15 Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 15 Sound Volume ........................................................................................................................... 16 ON/OFF Standby ....................................................................................................................... 16 Changing the Channels............................................................................................................ 17 SELECTING MENU ITEMS ............................................................................................................ 18 ADJUSTMENT .......................................................................................................................... 19-34 Adjusting the SLEEP TIMER Settings .................................................................................... 19 Adjusting the BRIGHTNESS Settings..................................................................................... 20 Adjusting the LANGUAGE Settings........................................................................................ 21 Adjusting the VIDEO ADJUST Settings ...........................................................................22, 23 Adjusting the PRESET Settings .............................................................................................. 24 SET UP .................................................................................................................................25, 26 Adjusting the BLUE SCREEN Settings .................................................................................. 27 Adjusting the CLOSED CAPTION Settings ............................................................................ 28 Adjusting the V-CHIP Settings .......................................................................................... 29-34 CONNECTING WITH EXTERNAL DEVICES .......................................................................... 35-37 TROUBLESHOOTING ..............................................................................................................38, 39 SPECIFICATIONS........................................................................................................................... 40 DIMENSIONAL DRAWINGS .......................................................................................................... 41

SUPPLIED ACCESSORIES Operation Manual Remote Control AC Cord Antenna Cable “AAA” size (UM/SUM-4) Dry Battery (×2) AC Adapter QACCD3088CEZZ UBATU0026GEZZ QCNWG0003CEPA UADP-0212CEZZ RRMCG1559CESA TINS-7604CEN1 LHLDW1028GEZZ Cable Clamp (×2) LCD COLOR TELEVISION LC-20B2UA ENGLISH Printed on post-consumer recycled paper. Imprimé sur du papier recyclé. FRANÇAIS TÉLÉVISEUR COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) OPERATION MANUAL MODE D’EMPLOI MENU Imprimé au Japon 02P01-JKK Printed in Japan TINS-7604CEN1 RRMCG1664CESA QACCD3097CEPA UADP-0243CEPZ UBATU0026GEZZ LHLDW0109CESA

If the remote control fails to operate the LCD color TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2 Insert batteries (two “AAA” (UM/SUM-4) size batteries, supplied with product). 3 Close the battery cover. I Slide the cover while pressing down. I Place the batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment. Caution! Cautions regarding batteries Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. • Place batteries with their terminals corresponding to the (+) and (–) indications. • Different types of batteries have different characteristics. Do not mix batteries of different types. • Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals. • Remove batteries when they become weak. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. • The batteries supplied with the product may have a shorter life expectancy due to storage conditions. • If the remote control is not used for an extended period of time, remove the batteries from the remote control. Using the Remote Control I Use the remote control by pointing it towards the remote sensor window. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control I Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. I Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit. I The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window. ＋ー＋ー

Household power outlet AC cord AC adapter Connect to the DC input terminal of the product. Notes: I Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet. I Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter. I Always unplug the AC adapter from the product and power outlet when not using for a long period of time. To DC input terminal (DC 13V) PREPARATION (Continued) Antenna Connection CABLE TV (CATV) CONNECTION Cable TV converter/ descrambler (not supplied) Two-set signal splitter (not supplied) Cable TV Line RF switch (not supplied) OUT IN • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. Please note: An RF switch provided with two inputs (A and B) is required (not supplied). “A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the TV’s channel keys. “B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/ descrambler by using the converter’s channel keys. I Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required. Note: VOL CH MENU TV/VIDEO MAIN POWER

OUTDOOR ANTENNA CONNECTION • Use one of the following two diagrams if you connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antennas. • Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set. B. Separate VHF and/or UHF Antennas F-type connector 75-ohm coaxial cable (round) 300-ohm twin-lead cable (flat) 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). 2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not supplied). Antenna Connection (Continued) • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. To antenna input terminal Antenna cable (supplied) VOL CH MENU TV/VIDEO MAIN POW 75-ohm coaxial cable 300-ohm twin-lead VHF/UHF antenna VHF/UHF antenna 300/75-ohm adapter (not supplied) 300-ohm twin-lead 300-ohm twin-lead 75-ohm coaxial cable OUT IN VHF antenna UHF antenna Combiner (not supplied) or or ANTENNAS

)/( ), VOL (+)/(–), and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation with the remote control. FRONT AND REAR CONTROL OPTIONS Main unit (front view) VOL CH MENU TV/VIDEO MAIN POWER POWER SLEEP VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER Speaker SLEEP indicator The SLEEP indicator lights up red when the SLEEP TIMER is set to on. Speaker Upper control panel Remote sensor window To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 50 degrees horizontally. Please adjust the angle so that the TV set can be watched most comfortably. POWER indicator A green indicator lights when the power is on and a red indicator lights when in the standby mode (the indicator will not light when the main power is off). Note:

FRONT AND REAR CONTROL OPTIONS (Continued) Antenna terminal AUDIO (L) AUDIO (R) HEADPHONE POWER INPUT (DC 13V) AUDIO (L) AUDIO (R) VIDEO Y PR PB AV-IN2/OUT COMPONENT AUDIO (L) AUDIO (R) VIDEO S-VIDEO AV-IN1

FRONT AND REAR CONTROL OPTIONS (Continued) I Before connecting a connection cord into the rear terminal, remove the back cover. Push in the tab and pull out the back cover carefully. I To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the back cover until the tab locks in place with a click. Removing the Back Cover I Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set. Headphones I Headphones are not included in the supplied accessories. I No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack. M On-screen display 60 VOLUME < Rear terminal Notes: VOL CH VOL CH MENU TV/VIDEO M

Argentina and Uruguay, set the color system according to the country before using this product by following the table below. Country TV broadcasting Factory setting of color system User setting system TV Video TV/Video U.S.A. Color: NTSC NTSC (N358) NTSC (N358) Not required TV ch: US ch US ch US ch or N/A Canada, Mexico, Color: NTSC NTSC (N358) NTSC (N358) Latin America TV ch: US ch US ch US ch Not required or N/A Brazil Color: PAL-M NTSC (N358) NTSC (N358) Set color system to TV ch: US ch US ch US ch PAL-M (see page 23) Argentina, Color: PAL-N NTSC (N358) NTSC (N358) Set color system to Uruguay TV ch: US ch US ch US ch PAL-N (see page 23) MENU/ ]/[/ (Cursor control) TV/VIDEO POWER DISPLAY*1 SLEEP MUTE VOL(+)/(–) MTS*3 BRIGHT FLASHBACK*2 CH ( )/( ) Channel Select *1Displays the receiving chan- nel for 10 seconds. *2Returns to the previous channel. *3Selects audio settings. I The 3 Dimensional Y/C separation circuit* only works when the color system is set to N358 in TV mode and Video mode. *The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding. Note:

Control section of main unit 1 Press MAIN POWER, located on the upper side of the main unit, to on. 2 The POWER indicator instantane- ously changes from red to green and the main unit is turned on. M On-screen display 2 STEREO

1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK BASIC OPERATION (Continued) 1 Press VOL (+) to increase the sound volume. The segment of the indicator increases. 2 Press VOL (–) to decrease the sound volume. The segment of the indicator decreases. 1 Press MUTE to temporarily turn off the sound. The MUTE mark is displayed for 4 seconds. 2 Press MUTE or VOL (+)/(–) to turn the sound back to the previous level. The mute function is automatically turned off when any of the following buttons are pressed: POWER, VOL (+)/(–), or MTS. To turn off the LCD TV Press POWER on the remote control. The POWER indicator will turn red. To turn the LCD TV back on Press POWER again. The POWER indicator will turn green. POWER MUTE VOL (+)/(–) MTS 50 VOLUME 10 VOLUME 30 VOLUME To select MTS (Multi ch TV Sound) 1 Press MTS to display the MTS screen. 2 Press MTS to select the MTS settings. [STEREO]: stereo audio [SAP]: second audio program [MONO]: monophonic audio 2 STEREO

button. 2 Press the 5 button. BASIC OPERATION (Continued) Changing the Channels Changing channels by using Channel Select on the remote control To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2- or 3-digit number. 1 Press the button. 2 Press the button. 3 Press the 5 button. To select a 3-digit channel number (e.g., Channel 115): Complete the following procedure within 4 seconds. I When selecting a 1-digit channel number, do not fail to press the button first. Changing channels with CH ( )/( ) on the remote control Air Press CH ( ) and the channels change in the order shown below: 2 → 3 → . . . → 68 → 69 → 2 → 3 → . . . Press CH ( ) and the channels change in the order shown below: 3 → 2 → 69 → 68 → . . . → 3 → 2 → . . . Cable Press CH ( ) and the channels change in the order shown below: 1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . . Press CH ( ) and the channels change in the order shown below: 3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . . 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK Note: Channel Select 0 – 5 1–– 1 1– 1 15 I The 3 -digit channel number can be selected only when the receiving mode is set to CABLE in CH-SETTING. (For details on setting the receiving mode, see page 25.) Note:

• This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. 1 Press MENU to display the MENU screen. 2 Press ]/[ to select the desired menu item. 3 Press to enter. 4 Press MENU to exit. I The TINT display only appears when the color system is set to N358 or N443. I The displayed items differ depending on the setting conditions. I The selected item changes to yellow. I Items in magenta cannot be selected. I This product is factory set to comply with the color system in the United States (NTSC-N358). For Brazil (PAL-M), Argentina (PAL-N) and Uruguay (PAL-N), set the color system before using this product. I To return to the previous screen, select RETURN. I You can adjust some settings with the special buttons: SLEEP and BRIGHT (see page 19 and page 20). Selecting Menu Items Notes: 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK * The screen indications shown above are larger than actual for easy reading. (Page 19) (Pages 22, 23) (Pages 20, 24) (Page 28) (Pages 31–34) (Pages 21, 25–27) MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU SLEEP T IMER SELECT : ADJUST : EX I T : MENU RETURN SLEEP T IMER [ ––– REMAI N] P I CTURE [ 30 ] T I NT COLOR BLACK LEVEL SHARPNESS SELECT : ENTER : EX I T : MENU V IDEO ADJUST ( TV ) RETURN [ 0 ] [ 0 ] [ 0 ] [ 0 ] BR IGHTNESS [ BR IGHT ] AUTO POWER OFF UPS IDE R IGHT / LEFT AV2 IN/ OUT SELECT : EX I T : MENU RETURN [OFF ] [NORMAL ] [NORMAL ] [ IN ] PRESET ADJUST : MODE [OFF ] DATA SELECT : EX I T : MENU RETURN [ CH 1 ] ADJUST : CLOSED CAPT ION INPUT SECRET NO. – – – – EX I T : MENU BLUE SCREEN [OFF ] LANGUAGE SELECT : EX I T : MENU RETURN ADJUST : SET UP CH–SETT ING COLOR SYSTEM RESET [ N358 ] MENU/ ]/[/

1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). The time can be set in increments of 30 minutes and in the range between 30 and 120 minutes. The SLEEP TIMER is turned off when --- is displayed. ADJUSTMENT Adjusting the SLEEP TIMER Settings 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK ––– REMA IN SLEEP Setting the SLEEP TIMER on the MENU screen 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to SLEEP TIMER. 3 Press to display the SLEEP TIMER screen. 4 Press to set the sleep timer (in minutes). The time can be set in increments of 30 minutes and in the range between 30 and 120 minutes. The SLEEP TIMER is turned off when --- is displayed. 5 Press MENU to return to the main screen. 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU 60 REMA IN MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU SLEEP T IMER SELECT : ADJUST : EX I T : MENU RETURN SLEEP T IMER [ ––– REMAI N] You can set the SLEEP TIMER to automatically turn off the TV. Note: I The SLEEP TIMER screen automatically disappears in 3 seconds. Notes: I When you set the SLEEP TIMER, the SLEEP indicator lights. I After you set the SLEEP TIMER, if you turn off the MAIN POWER on the TV set or press the POWER button on the remote control, the SLEEP TIMER setting is cancelled and the SLEEP indicator goes out. I 5 minutes before the SLEEP TIMER turns off the TV, 5 REMAIN is displayed on the screen for 4 seconds. The SLEEP TIMER counts down and shows a similar 4-second display for each remaining minute until the timer turns off the TV.

You can set the brightness of the screen. Directly setting the BRIGHTNESS 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK BRIGHT MENU BR IGHTNESS [BR IGHT ] MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU BR IGHTNESS [ BR IGHT ] AUTO POWER OFF UPS IDE R IGHT / LEFT AV2 IN/ OUT SELECT : EX I T : MENU RETURN [OFF ] [NORMAL ] [NORMAL ] [ IN ] PRESET ADJUST : Setting the BRIGHTNESS on the MENU screen 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to PRESET. 3 Press to enter. 4 Press ]/[ to move the cursor to BRIGHTNESS. 5 Press to set the brightness. 6 Press MENU to return to the main screen. BRIGHT NORMAL DARK Notes: I The BRIGHTNESS screen automatically disappears in 3 seconds. I [BRIGHT]: maximum brightness [NORMAL]: 60% brightness (suitable for viewing in a well-lit area and saves energy) [DARK]: 20% brightness (sufficiently bright when viewing in a dimly lit area)

The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to SET UP. 3 Press to enter. 4 Press ]/[ to move the cursor to LANGUAGE. 5 Press to enter. 6 Press ]/[ to select the lan- guage. 7 Press MENU to return to the main screen. ADJUSTMENT (Continued) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU BLUE SCREEN [OFF ] LANGUAGE SELECT : EX I T : MENU RETURN SET UP CH–SETT ING ENTER : LANGUAGE ENGL I SH ESPAÑOL FRANCA I S SELECT : EX I T : MENU

1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to VIDEO ADJUST. 3 Press to enter. 4 Press ]/[ to move the cursor to the desired item. 5 Press to enter. 6 Press to change the setting. 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU P I CTURE [ 30 ] T I NT COLOR BLACK LEVEL SHARPNESS SELECT : ENTER : EX I T : MENU V IDEO ADJUST ( TV) RETURN [ 0 ] [ 0 ] [ 0 ] [ 0 ] COLOR SYSTEM RESET [ N358 ] SELECT : ADJUST : EX I T : MENU RETURN P I CTURE 30 – + Note: I See page 23 for the settings. 7 Press MENU to return to the main screen.

Higher color intensity BLACK LEVEL Less bright More bright SHARPNESS Soft picture Hard picture RED-BLUE More red level More blue level GREEN Less green level More green level COLOR SYSTEM Press to select the COLOR SYSTEM. I When the COMPONENT mode is selected Notes: I TINT is displayed only when N358 or N443 is selected. I In BLUE SCREEN, PICTURE setting displayed in magenta cannot be selected. I Selecting RESET will return all settings to the factory settings. I This product is factory set to comply with the color system in the United States (NTSC-N358). For Brazil (PAL- M), Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using this product. ADJUSTMENT (Continued) Selected item Press <. Press >. PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL Less bright More bright SHARPNESS Soft picture Sharp picture COLOR SYSTEM TV mode AV mode Adjusting the VIDEO ADJUST Settings (Continued)

screen. ADJUSTMENT (Continued) Adjusting the PRESET Settings Selected item Factory setting Setting change BRIGHTNESS [BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area. Saves energy. [DARK] Brightness 20% → Sufficiently bright when viewing in a dimly lit area. AUTO POWER OFF [OFF] [ON] The power of the LCD TV set is turned off when there is (only TV mode) no signal for 5 minutes. [OFF] This feature is inactive. UPSIDE [NORMAL] Normal vertical [DOWN] Inverted image → To display images upside down for image orientation special uses. RIGHT/LEFT [NORMAL] Normal horizontal [MIRROR] Mirror image → To display mirror images for special uses. image orientation AV2 IN/OUT [IN] [OUT ] Line Output is selected, Output volume is fixed, Speaker output is available. [OUT ] Line Output is selected, Output volume is variable, Speaker output is Mute. ABC 2 Press ]/[ to move the cursor to PRESET. 3 Press to enter. 4 Press ]/[ to move the cursor to the desired item. 5 Press to change the setting. 6 Press MENU to return to the main screen. ABC 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU BR IGHTNESS [ BR IGHT ] AUTO POWER OFF UPS IDE R IGHT / LEFT AV2 IN/ OUT SELECT : EX I T : MENU RETURN [OFF ] [NORMAL ] [NORMAL ] [ IN ] PRESET ADJUST :

programs. 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to SET UP. 3 Press to enter. 4 Press ]/[ to move the cursor to CH-SETTING. 5 Press to enter. 6 Press ]/[ to move the cursor to AIR/CABLE. 7 Press to enter. 8 Press ]/[ to move the cursor to the desired mode. 9 Press MENU to return to the main screen. Note: I Receivable channels of your TV set are: AIR channels: CABLE channels: VHF: 2 through 13. 1 (HRC and IRC mode only) UHF: 14 through 69. 2 through 125 (STD, HRC and IRC) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU BLUE SCREEN [OFF ] LANGUAGE SELECT : EX I T : MENU RETURN SET UP CH–SETT ING ENTER : CH–SETT ING A I R/ CABLE CH SEARCH CH MEMORY SELECT : ENTER : EX I T : MENU RETURN A IR/ CABLE SELECT : EX I T : MENU A IR CABLE

I Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press ]/[ to move the cursor to SET UP, and press to enter. 2 Press ]/[ to move the cursor to CH-SETTING, and press to enter. 3 Press ]/[ to move the cursor to CH SEARCH, and press to enter. I Adding weak or additional channels or erasing unwanted channels from TV memory 1 Press MENU to display the MENU screen, press ]/[ to move the cursor to SET UP, and press to enter. 2 Press ]/[ to move the cursor to CH-SETTING, and press to enter. 3 Press ]/[ to move the cursor to CH MEMORY, and press to enter. 4 Use ]/[ or Channel Select to select each desired channel to add or erase. 5 Press > to add the channel to the TV’s memory or press < to erase the channel from the TV’s memory. 6 Press MENU to exit. > to add channel 2 to the TV memory < to erase channel 2 to the TV memory ADJUSTMENT (Continued) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ CH–SETT ING A I R/ CABLE CH SEARCH CH MEMORY RETURN 4 Press >. The tuner will search through all available channels in your area and add them to the TV’s memory. START : EX I T : MENU CH SEARCH A IR 2 Note: I To interrupt CH SEARCH, press <. CH SEARCH will stop at the current channel and will not add any higher channels. 5 Press MENU to exit. Note: I If CH SEARCH is performed again, the previously memorized channels will be lost. 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ Channel Select CH–SETT ING A I R/ CABLE CH SEARCH CH MEMORY RETURN TO ADD: EX I T : MENU CH MEMORY A IR 2 TO ERASE : EX I T : MENU CH MEMORY A IR 2

Automatically turns the screen blue if a broadcast signal is not received. 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to SET UP. 3 Press to enter. Adjusting the BLUE SCREEN Settings 4 Press ]/[ to move the cursor to BLUE SCREEN. 5 Press to select ON or OFF. 6 Press MENU to return to the main screen. 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU BLUE SCREEN [OFF ] LANGUAGE SELECT : EX I T : MENU RETURN ADJUST : SET UP CH–SETT ING BLUE SCREEN [ON ] LANGUAGE SELECT : EX I T : MENU RETURN ADJUST : SET UP CH–SETT ING Notes: I When received signals are weak or interfered with by some other signals, the BLUE SCREEN function may be activated. To watch the TV under such conditions, set BLUE SCREEN to OFF. I When the AV-IN1, AV-IN2 or COMPONENT input mode is selected, if no signal is being input, the BLUE SCREEN function is activated.

1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to CLOSED CAPTION. 3 Press to enter. CAPTION TEXT OFF CH 1 CH 2 MODE: DATA: I If a broadcast has CLOSED CAPTION and MUTE is pressed, the set enters [CAPTION] mode automatically. Pressing MUTE again will return the set to its previous condition. I Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with your set. I If any button is pressed to call up the On-Screen Display while viewing a Closed Caption broadcast, the closed captions will disappear momentarily. I If no TEXT broadcast is being received while viewing in the [TEXT] mode, the screen may become dark and blank for some programs. Should this occur, switch the Closed Caption mode to OFF. I SETTING CLOSED CAPTION • This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). • Not all the programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown. • The Closed Caption broadcasts can be viewed in two modes: [CAPTION] and [TEXT]. For each mode, two channels are available: CH1 and CH2. The [CAPTION] mode shows subscripts of dialogs and commentaries of TV dramas and news programs while allowing a clear view of the picture. The [TEXT] mode displays various information over the picture (such as TV program schedules and weather forecasts, etc.) that is independent of the TV programs. Notes: 4 Press ]/[ to move the cursor to MODE or DATA. 5 Press to change the CLOSED CAPTION setting. 6 Press MENU to return to the main screen. ADJUSTMENT (Continued) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP SELECT : ENTER : EX I T : MENU MODE [OFF ] DATA SELECT : EX I T : MENU RETURN [ CH 1 ] ADJUST : CLOSED CAPT ION MODE [OFF ] DATA RETURN [ CH 1 ] CLOSED CAPT ION MODE [ CAPT ION] DATA RETURN [ CH 2 ] CLOSED CAPT ION

I V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. • Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content. • Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control. [1] MPAA RATING MPAA RATING (examples) Example 1: PG-13 in the age-based rating is blocked, this will also automatically block the higher ratings R, NC-17 and X. Example 2: R in the age-based rating is blocked, this will also automatically block the higher ratings NC-17 and X. ote: I The MPAA rating is only age-based. RATING G GENERAL AUDIENCES. All ages admitted. PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PG-13 PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13. R RESTRICTED. Under 17 requires accompanying parent or adult guardian. NC-17 NO ONE 17 AND UNDER ADMITTED. X X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.: age base Note: ADJUSTMENT (Continued)

RATING ⇑ age base ⇓ Adjusting the V-CHIP Settings (Continued) ⇐ content base ⇒ FV V S L D (Fantasy (Violence) (Sexual (Adult (Sexually Violence) Situation) Language) Suggestive Dialog) TV-Y (All children) TV-Y7 (Direct to Older Children) ✕ TV-G (General Audience) X TV-PG (Parental Guidance ✕ ✕ ✕ ✕ Suggested) xxx TV-14 (Parents Strongly ✕ ✕ ✕ ✕ Cautioned) X TV-MA (Mature Audience Only) X ✕ ✕ ✕ : The content rating can be set, but this rating is not normally broadcast by TV stations. ✕: The content rating can be set. TV PARENTAL GUIDELINES (examples) Example 1: When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings: TV-G, TV-PG, TV-14 and TV-MA. In addition, D, L, S, V and FV in CONTENT are automatically blocked unless you manually set BLOCK CONTENT. Example 2: When no item in the age-based rating is blocked, D in the content-based rating will be automatically blocked. I Age-based ratings can be modified by the content-based ratings, but only in the combinations indicated by an X in the table above. I Choosing a lower age-based rating blocks the higher age-based ratings regardless of content rating settings. I If you set TV-Y and TV-Y7 to BLOCK, CONTENT will display all items. Notes: ADJUSTMENT (Continued)

I SETTING V-CHIP Adjusting the V-CHIP Settings (Continued) 2 Press ]/[ to move the cursor to V-CHIP BLOCK, and press to enter. 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using the channel select keys. 4 Press to move the cursor to MPAA, and press to enter. 5 Press ]/[ to move the cursor to PG, and then press to select BLOCK. If you set PG to BLOCK, PG-13, R, NC-17 and X are automatically blocked. 6 Press MENU to return to the main screen. I If you set G to BLOCK, all ratings are automatically blocked. I If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked. Notes: 1 Press MENU to display the MENU screen. ADJUSTMENT (Continued) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ Channel Select MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP INPUT SECRET NO. – – – – EX I T : MENU MPAA TV GUIDEL I NES STATUS SELECT : ENTER : EX I T : MENU RETURN V–CH IP BLOCK [OFF ] MPAA G [ ––––– ] SELECT : ADJUST : EX I T : MENU RETURN PG [ BLOCK ] PG–13 [ BLOCK ] R [ BLOCK ] NC–17 [ BLOCK ] X [ BLOCK ]

Parent Control (V-CHIP Operation Continued) Adjusting the V-CHIP Settings (Continued) 1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press ]/[ to move the cursor to TV GUIDELINES. 3 Press to enter. 4 Press ]/[ to move the cursor to TV-Y7, and press to select BLOCK. If you set TV-Y7 to BLOCK, TV-G, TV-PG, TV-14 and TV-MA are automatically blocked. In addition, D, L, S, V and FV in CONTENT are automatically blocked. 5 Press MENU to return to the main screen. 1 Press ]/[ to move the cursor to BLOCK CONTENT, and press to enter. 2 Press ]/[ to move the cursor to the desired item, and press to select BLOCK or ----- (un- block). 3 Press MENU to return to the main screen. Note: ADJUSTMENT (Continued) I If you set TV-14 to BLOCK, TV-MA is automatically blocked. Contents D, L, S and V are automatically blocked by X in the table on page 30. 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ I Setting MPAA I Setting BLOCK CONTENT 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ MPAA TV GUIDEL I NES STATUS SELECT : ENTER : EX I T : MENU RETURN V–CH IP BLOCK [OFF ] TV GUIDEL I NES TV–Y [ ––––– ] SELECT : ADJUST : EX I T : MENU BLOCK CONTENT [D L S V FV ] RETURN TV–Y7 [ BLOCK ] TV–G [ BLOCK ] TV–PG [ BLOCK ] TV–14 [ BLOCK ] TV–MA [ BLOCK ] TV GUIDEL I NES TV–Y [ ––––– ] SELECT : EX I T : MENU BLOCK CONTENT [ ] RETURN TV–Y7 [ ––––– ] TV–G [ ––––– ] TV–PG [ ––––– ] TV–14 [ ––––– ] TV–MA [ ––––– ] ENTER : D [ ––––– ] SELECT : ADJUST : EX I T : MENU RETURN L [ BLOCK ] S [ ––––– ] V [ ––––– ] FV [ ––––– ] BLOCK CONTENT

Adjusting the V-CHIP Settings (Continued) 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to V-CHIP BLOCK, and press to enter. 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using the channel select keys. (The secret number is not displayed on the screen.) 1 V-CHIP HAS BEEN ACTIVATED will be displayed if you watch the program with Program Rating data as same as you configured. [4] CANCELING THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK IS ACTIVATED Note: I V-CHIP HAS BEEN ACTIVATED will not be displayed if STATUS is not configured to ON. 2 Press MENU to display INPUT SECRET NO. 3 Input the 4-digit secret number by using the channel select keys; V- CHIP BLOCK is temporarily canceled. If you input an incorrect secret number, SECRET NO. IS INCORRECT is displayed. In this case, input the correct secret number. I If you turn the power on from off, V-CHIP BLOCK will be activated again. If you select V-CHIP BLOCK again by using MENU, V-CHIP BLOCK will be turned on again. Note: ADJUSTMENT (Continued) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU/ ]/[/ Channel Select 4 Press MENU to register the secret number. MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP MENU SLEEP T IMER V IDEO ADJUST PRESET CLOSED CAPT ION V–CHI P BLOCK SET UP INPUT SECRET NO. ENTER : MENU 0 1 2 3 V–CHIP HAS BEEN ACT I VATED TV–Y INPUT SECRET NO. – – – – EX I T : MENU 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK MENU Channel Select

Adjusting the V-CHIP Settings (Continued) 1 Repeat steps 1 to 3 of [1] MPAA RATING, then INPUT SECRET NO. will be displayed. 2 Input the 4-digit secret number by using the channel select keys; the V-CHIP select mode will be displayed. Set V-CHIP BLOCK again. [6] CHANGING OR CLEARING THE SECRET NUMBER 1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [4] CANCELING THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK IS ACTIVATED, then INPUT SECRET NO. will be displayed. 2 Press and hold both CH ( ) and VOL (+) on the TV set simultane- ously until the message INPUT SECRET NO. blinks. 3 Press MENU to exit. ADJUSTMENT (Continued) 1 4 7 MTS 2 5 8 0 3 6 9 100 POWER DISPLAY SLEEP BRIGHT MENU MUTE TV/VIDEO CH VOL FLASHBACK INPUT SECRET NO. – – – – EX I T : MENU INPUT SECRET NO. * * * * EX I T : MENU Channel Select If you forget the secret number, clear the secret number as follows. VOL CH MENU Upper control panel of the main unit VOL (+) CH ( ) MENU

You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage. • Video camera • Home video game system External devices that can be connected to COMPONENT terminal * If your external device has an S-Video terminal, S-VIDEO connection is recommended. Notes: I PC connection is not possible. I For the cable, use a commercially available audio/video cord. I Only connect audio/video signals to AV-IN1 and 2 terminals. Connecting other signals may result in a malfunction. I AV-IN1 has 2 video input terminals: VIDEO and S-VIDEO. When you connect external devices to both terminals (and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. To view the picture from the VIDEO terminal, do not connect any external device to the S-VIDEO terminal. I For more information about external device connections, see the manuals of your external devices. VOL CH MENU TV/VIDEO MAIN POWER TUNER/BAND DVD AUX 1 AUX 3 AUX 2 SURROUND ON/OFF TUNER/BAND DVD AUX 1 AUX 3 AUX 2 SURROUND ON/OFF Example of external devices that can be connected External devices that can be connected to AV-IN2 terminal * If your external device has a component terminal, COMPONENT connection is recommended (you can view high-quality pictures). If your external device does not have a component terminal, S-VIDEO connection is recommended. • DVD, etc. • VCR • Laser disc player * If your external device has an S-Video terminal, S-VIDEO connection is recommended. External devices that can be connected to AV-IN1 terminal

Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) Notes: I If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended. (Use an S-video cord.) I When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select AV-IN1), you can only view pictures from the S-VIDEO terminal. I You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use care to connect the video and audio cables to the corresponding terminals. I Do not connect antennas or headphones to AV-IN2. TUNER/BAND DVD AUX 1 AUX 3 AUX 2 SURROUND ON/OFF TUNER/BAND DVD AUX 1 AUX 3 AUX 2 SURROUND ON/OFF VIDEO AUDIO L Y PB PR R AUDIO L R COMPONENT AV-IN2/OUT ANT. VIDEO S-VIDEO AUDIO L R HEAD PHONE POWER INPUT DC13V AV-IN1 VOL CH MENU TV/VIDEO MAIN POWER To AV-IN2 terminal To audio/video output terminal To component input (Video) terminal To component input (Audio) terminal To AV-IN1 terminal To audio/video output terminal Video Audio (L) Audio (R) Audio (L) Audio (R) Y PB PR DVD Player VCR Video Audio (L) Audio (R) Video camera To S-video input terminal To S-video output terminal S-Video VCR

Outputting video and audio (video output) You can output video and audio data from the TV set through the AV output terminals (AV-OUT). Note: I AV2 has 2 OUT modes (see page 24). I When using the S-Video input for AV-IN1, no video output will be made to the AV output terminal, but audio output will be made for connection to external audio systems. Notes: Connect a VCR, Audio amplifier, etc. How to fix the cables • Fix cables and cords with the attached cable clamps so that they do not get caught when mounting the cover. • Connect the cables and cords after fixing the cable clamps (2 positions). VOL CH MENU TV/VIDEO MAIN POWER Cable clamps VIDEO AUDIO L Y PB PR R AUDIO L R COMPONENT AV-IN2/OUT VOL CH MENU TV/VIDEO MAIN POWER

the encountered symptoms. TV set Problem Check item Reference Pages There is no picture. There is no picture from AV-IN 1. 9 15 15 Sound Picture • Make sure the AC adapter is properly inserted in the power outlet. • Reception other than those of broadcasting stations can be considered. • Make sure the input mode is set to TV. • Make sure the main power switch of the main unit is on. There is no picture or sound. Picture • Make sure the BLACK LEVEL is properly adjusted. • Fluorescent lamp may have reached the end of service life. • Make sure the S-Video terminal is free of connections. There is no sound. • Make sure the volume is not set to minimum. • Make sure the sound is not set to mute. • Make sure that headphones are not connected. There is no picture or sound, just noise. • Make sure the antenna cable is properly connected. • Consider whether TV signals are being properly received. Picture is not clear. • Make sure the antenna cable is properly connected. • Consider whether TV signals are being properly received. Picture is light or improperly tinted. • Check color adjustment. • Check color system setting. The picture is too dark. • Press the Brightness button. • Check PICTURE and BLACK LEVEL adjustment. • Fluorescent lamp may have reached the end of service life. Remote control does not work. • Check the batteries of the remote controller. • Make sure the remote sensor window is not under strong fluorescent lighting. 22, 23 – 36 16 16 13 9 – 9 – 22, 23 22, 23 40 8 8

• The state of the broadcast may also be bad. • Make sure the antenna is facing the right direction. • Make sure the outside antenna is not disconnected. The picture is not sharp. TROUBLESHOOTING (Continued) The picture moves. The picture is doubled or tripled. • Make sure the antenna is facing the right direction. • There may be reflected electric waves from mountains or buildings. The picture is spotted. • There may be interference from automobiles, trains, high voltage lines, neon lights, etc. • There may be interference between the antenna cable and power cable. Try positioning them further apart. There are stripes on the screen or colors fade. • Is the unit receiving interference from other devices? Transmission antennas of radio broadcasting stations and transmission antennas of amateur radios and cellular phones may also cause interference. • Use the unit as far apart as possible from devices that may cause possible interference. I Use in hot and cold rooms (locations) • When the unit is used in a low temperature rooms (location), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. • Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. (Storage temperature: –20°C to +60°C)

Number of dots 921,600 dots VGA Video color systems N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 Destination USA/Latin A/Twn TV Standard (CCIR) NTSC/PAL-M/PAL-N TV function TV Tuning System PLL 181 ch. STEREO MTS+SAP CATV 125 ch. 3 Dimensional Y/C separation circuit Yes (N358 only) Digital comb filter Yes Brightness 430 cd/m2 Lamp life 60,000 hours Viewing angles H: 170° V: 170° Audio amplifier 2.5 W × 2 Speakers ø 2 in. (5 cm), 2 pcs. AV1 AV-IN1, S-VIDEO-IN AV2 AV-IN2/AV-OUT Terminals COMPONENT COMPONENT-IN, AUDIO-IN Antenna F-Type Headphone Mini-jack for stereo (3.5 ø) OSD language English/French/Spanish Power supply DC 13 V, AC 110–240 V, 50/60 Hz Weight 18.5 lbs (8.4 kg), w/o accessories Accessories Remote control, Batteries, Antenna cable, AC adapter, AC cord, Cable clamps As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

41 DIMENSIONAL DRAWINGS Unit: inch/mm POWER INPUT DC12V ANT. HEAD PHONE S-VIDEO R AUDIO VIDEO AV-IN1 L AV-IN 2/OUT COMPONENT R AUDIO VIDEO L R AUDIO L PR PB Y 24.8/630 15.8/401.3 6.5/163.9 1.2/30.5 2.6/65.5 9.0/229.4 18.6/473.5 11.8/298.8 18.5/468.8 15.0/381.5 7.4/188 7.6/193.5 4.2/107.3 2.9/72.6

Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION LIMITED WARRANTY END-USER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first end user purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all other warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. If, under applicable state law, implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is limited to the period(s) from the date of purchase set forth below. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply. Model Specific Section Your Product Model Number & Description: LC-20B2UA LCD Color Television (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: One (1) year parts and labor from the date of purchase. Additional Item(s) Excluded from Warranty Coverage (if any): None Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. What to do to Obtain Service: Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and packaged securely. TO OBTAIN PRODUCT INFORMATION, CALL 1-888-LCD-SHARP. CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.

Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein. This warranty shall not apply to: (a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner’s manual. (b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres or Sharp’s Authorized Servicing Dealers. (c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to head cleaning tapes and chemical cleaning agents. (d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and paper. (e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear. (f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage. (g) Any product received without appropriate model, serial number and CSA/cUL markings. (h) Any products used for rental or commercial purposes. (i) Any installation, setup and/or programming charges. Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven. This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. WARRANTY PERIODS: Parts & Labour (exceptions noted) Audio Products 1 year Camcorder 1 year DVD Products 1 year LCD Projector 1 year (lamp 90 days) LCD TV 1 year Microwave Oven 2 years (magnetron component-3 additional years) Television Products 1 year (picture tube component-1 additional year) VCR Product 1 year Vacuum Cleaner 1 year To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact: SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East Mississauga, Ontario L4Z 1W9 For more information on this Warranty, Sharp Extended Warranty Offers, Sharp Canada Products, Accessory Sales, Dealer or Service Locations, Tronto please call (905) 568-7140 1-877-SHARP-CC (1-877-742-7722) Visit our Web site: www.sharp.ca VALID IN CANADA ONLY