Sharp AQUOS LC-60LE550U Operation Manual

Page 9 [] Connection guide ( × 1) "AA" size battery (× 2) Stand unit (× 1) Page 10 Page 7 , Always use the AC cord supplied with the TV. , The illustrations above are for explanation purposes and may vary slightly from the actual accessories. , The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. The examples used throughout this manual are based on the LC-60LE550U model. 1

To aid reporting in case of loss or theft, please record I the TV's model and serial numbers in the space Serial No.: provided. The numbers are located at the rear and left side of the TV. IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the A L tothep .... ........ f important ill operating and maintenance i ,_ (servicing) instructions in the literature accompanying the product. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. Printed in Mexico TINS-F697WJ N1 13P01-MX-NM

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RESPONSIBLE PARTY: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 TEL: 1-800-BE-SHARP For Business Customers: URL http://www.sharpusa.com INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. i Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. i Consult the dealer or an experienced radio/TV technician for help. "Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical." This product qualifies for ENERGY STAR when "Home" is selected for "TV Location". Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use. Trademarks L Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of i Dolby Laboratories. I - High-Definition Interface, Logo are or ] .The terms HDMI and HDMI Multimedia and the HDMI trademarks __ registered trademarks of HDMI Licensing LLC in the United States and other countries. - are designed protect through superior ] * Products that have earned the ENERGY STARc_ to the environment [ energy efficiency.

Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product, IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time+ 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Additional Safety tnformation 15) Power Sources--This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 16) Overloading--Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17) Object and Liquid Entry--Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18) Damage Requiring Service--Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 19) Replacement Parts--When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 20) Safety Check--Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21) Wall or ceiling mounting--When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer+

connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and builbup static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead/in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 ELECTRODESYSTEM (NEOART250} NEC -- NATIONAL ELECTRICAL CODE fo Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the manufacturer. • Selecting the location Select a place with no direct sunlight and good ventilation. • Ventilation The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for buNtdn installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturePs instructions are followed. • The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks. • Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. • The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product. • Lightning For added protection for this television equipment during a lightning stom_, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and powerdine surges. • Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. • To prevent fire, never place any type of candle or flames on the top or near the TV set. • To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. • Do not display a still picture for a long time, as this could cause an afterimage to remain. • To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product. • Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or electric shock. Exercise special caution when using the product around childien. Precautions when transporting the • When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always _, carry the TV by two people holding it with two hands one hand on each side of the TV. aring for the Cabinet Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet. Using a chemical cloth (wet!dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking. Wiping with a hard cloth or using strong force may scratch the surface of the cabinet. If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth. Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off. Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.

• Turn offthe main power and unplug theAC cord from the wall outlet before handling. • Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.). To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet!dry _ _. _ _ sheet type cloth, etc.). This may damage the sur[ace of the display panel. • Wiping with a hard cloth or using strong force may scratch the surface of the display panel. Use a soft damp cloth to gently wipe the display panel when it is really dirty. (It may scratch the surface of the display panel when wiped strongly.) • If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it. • To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for _. ordering, or VISIT http://www.sharpusa.com/SharpDirect. f CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES Manutacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment sate and enjoyable. As you enjoy your television, please note that all televisions new and old _ must be supported on proper stands or installed according to the manufacturer's recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury. TUNE IN TO SAFETY ALWAYS tollow the manufacturer's recommendations for the sate installationof your television. ALWAYS read and follow all instructions for proper use o1your television. NEVER allow children to climb on or play on the television or the furniture on which the television is placed. NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers. ALWAYS install the television where it cannot be pushed, pulled over or knocked down. ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed. WALL OR CEILING MOUNT YOUR TELEVISION ALWAYS contact your retailer about protessional installation if you have any doubts about your ability to safely mount your television. ALWAYS use a mount that has been recommended by the television manutactarer and has a satet certification by an independent laboratory (such as UL, CSA, ETL). ALWAYS tollow all instructions supplied by the television and mount manufacturers. ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be moanted to walls and ceilings with steel studs or cinder block construction. Ifyou are unsure, contact a protessional installer. Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation. MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat panel television. Special care should be made in the placement of older CRT televisions. ALWAYS place your older CRT television on furniture that is sturdy and appropriate tor its size and weight. NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb. ALWAYS make sure your older CRT television does not hang over the edge of your furniture. CE.org/safety

and unphJg the AC cord. o Before performing work spread cushioning over the base area to laythe TV on. This will prevent it from being damaged. o Attach the stand in the correct direction. o Do not remove the stand from the TV unless using an optionam wall mount bracket to mount it. o Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. o After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV. 1 Confirm that there are 12 screws (8 long screws and 4 short screws) supplied with the stand unit. 2 @ Set the post for the stand unit onto the polystyrene foam. Attach the base to the post. Insert and tighten the 8 screws into the 8 holes on the bottom of the base. o Hold the stand unit securely with one hand, and then tighten the screws. [] LC-70LE550U ® ,_ Long screw_ 3 _ Insert the stand into the openings on the bottom of the TV. o Make sure that the stand is limply inserted into the TV. Improper installation may result in tilting of the TV set. Insert and tighten the 4 screws into the 4 holes on the rear of the TV. o Before detaching the stand, make sure to turn off the TV and unplug the AC cord. o Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. 1 Unfasten the four screws used to secure the stand in place. @ [] LC-60LE550U ® 2 Detach the stand from the TV. ft ® j¢<1 _ o In the installation procedure, be careful not to catch your fingers between the TV set and the floor. 7

on the wall only with the wall mount bracket AN-52AG4 (SHARP), The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. , Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves, SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV • You carl ask a qualified service professional about using an optional AN-52AG4 bracket to mount the TV to the wall. Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-52AG4 wall mount bracket. (See the bracket instructions for details.) Vertical mounting Angular mounting About setting the TV angle AN-52AG4 LC- 70LE550U The center of the display: 2s/e4inch (10 mm) above the "c" position. LC-60LE550U The "e" position is at the center of the display. Refer to the operation manual of AN-52AG4 for details. o Due to the terminal confFguratJon on this TV, when you wall mount this model, make sure there is enough space between the wall and the TV for the cables. o To use this TV mounted on a wall, remove the AC cord holder on the rear ot the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. Q • • o " - The listed optional accessory is available for the Liquid Crystal Television. Please purchase them at your nearest shop. • Additional optional accessories may be available in the near tuture. When purchasing, please read the newest catalogue tot compatibility and check the availability.

of the television. (See page 10.) 2 Connect the AC plug for the television into the AC outlet. o Place the TV close to the AC outlet, and keep the power phJg within reach. o TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. 3 When turning on the TV for the first time, press POWER on the television. POWER 4 Insert the batteries into tile remote control unit. (See page 10.) o Speakers cannot be detached from the TV. o TV angle cannot be adjusted. e- - • m ._ - An HD'I'V without an HD source is just an ordinary "iV. To enjoy HD images an the TV, you should get HD programming from the following: o Over the-air broadcasting via HD quality antenna o HD cable/satellite subscription o HD compatible external equipment o For intormation on updating to HD programming, ask your cable/satellite service provider. • I" _'Ho " ol • I| Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Remete__ _ The angle is 8° when the stand is attached. [] Cautions regarding the remote controE unit o Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. o Do not install or place the remote control unit under direct sunlight. The heat may cause detorrnation of the remote control unit. o The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote controE sensor. IMPORTANT: IF THE UNIT DOES NOT POWER ON UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800 BE-SHARP.

picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. fl.A 75 ohm system is generally a round cabb with F type connector _F type connector that can easily be attached to a terminal without toob (Commercially _- 75 ohm coaxial cable (round) available). 2. A 300 ohm system is a fiat "twin-bad" cabb that can be attached to a 75 ohm terminal through a 300/75 ohm adapter (Commercially availabb). 300 ohm twin lead cable (fiat) F-type connector should be finger-tightened only. When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set. (The breaking 75-ohm coaxial cable f Connecting Antenna Cable • connect the antenna cable to the TV using one of the methods in the illustration as shown (_1), (2), _,3 or 4h) Home Antenna ,_1) Cable without a CATV terminaE (75-ohm) converter (2) VHF/UHF antenna (3) Combination VHF/ UHF antenna ,_) Separate VHF/UHF antenna If the remote control fails to operate TV functions, replace the batteries in the remote control unit. I Open the battery cover. 2 Insert two "AA" size batteries 3 Close the battery cover. (supplied with the product). o Place the batteries with their terminals corresponding to the ( ) and (-) _ indications in the battery compartment. Improper use ot batteries can result in chemical leakage or explosion. Be sure to tollow the instructions below. o Do not mix batteries of different types. Different types ot batteries have different characteristics. o Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. o Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. o The batteries supplbd with this product may have a shorter life expectancy due to storage conditions. o Ifyou will not be using the remote control unit tor an extended period ot time, remove batteries from it. 10

_Hnn/' buttonsJ til [ ::::....... "1 See pages 13 and 18 for button operations. •20PC: Optical Picture Control (See page 19.) E PC IN terminal AUDIO iN terminal (shared for HDMI iN 1 and PC IN) *2 HDMI IN 1 terminal HDMI IN 2 terminal AUDIO OUT terminals -- Antenna!Cabb in A_I/CABLE COMPONENT IN terminals -- DIGITAL AUDIO OUT terminal j "1 See page 12 for external equipment connection. *2 See page 21 for details on the PC Audio Select function. 11 _-- HDMI IN 3 terminal -- VIDEO IN terminals

source images, select the input source from INPUT on the remote control unit or on the TV. (See page 16.) For connecting the TV to external equipment, use commercially available cables. , The illustrations of the terminals are for explanation purposes and may vary slightly from tile actual products. • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefWly before making connections. [] Connecting a Blu-ray Disc Player, DVD Player, Cable/Satellite Set-top Box, VOR, Game Console or Cameorder Terminalon external Cable Terminalon the TV equipment HD Quality ® DV_OUT AUD]OOUT co_pONENT 0_f L® ®. AUDIO OUT iiiiiiiiiiiiiiiii!i_ ® L® ®R VIDEO OUT AUDIO OUT Standard Quality ;q_c_--,_ HDMI certified cable DVI HDMI conversion cable o 3.5 mm stereo minijack cable Component video cable _q_-_ Audio cable _<:d"P AV cable NDMmmN1,2or 3 Hi.rift1 IN "1 *2 *3 _,o AUDIO [N ® COMPONENT mN *3 ®_ AUDIO VIDEO mN @ AUDI / IN @ L @VIDEO IN "1 Supported Audio format: Unear PCM, sampling rate32/44.t/48kHz. *2 When using a DVFHDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVl HDMI conversion cable to the HDMI IN I terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO iN terminal and set "PC Audio Select" to "HDMI1 ". (See page 21.) *3 To enjoy 1080p display capability, connect your external equipment using an HDMI certified cable or a component cable and Cable Optical fiber cable Audio cable :°_,h Terminalon the TV DIGmTALAUDIO *4 OUT IGI;A AUDIO *5 AUDIO OUT AUDIO Om @ @ set the equipment to 1080p output. [] Connecting an Audio Amplifier Terminalon external equipment AUDIO iNPU1 *4 The DIGITAL AUDIO OUT terminal does not output the audio signals from external equipment connected to the HDMI IN terminals. In this case, make analog audio connections to the AUDIO OUT terminals. *5 See page 25 for details on the Output Select function. [] Connecting a PC Terminal on PC ANALOG RGB ® AUDIO OUT i,,li311rl i ® DV] OUT AUDIO OUT Cable Analog RGB cable (D-sub 15-pin cable orVGA cable) o 3.5 mm stereo minijack cable _m m_ /_/J:L:,_-_ HDMI-certified cable ;:i_"" "" DVI-HDMI conversion cable e 3.5 mm stereo minijack cable Terminal on the TV _,o AUDIO IN ® HDMI IN 1, 2 or 3 _mn IN *_,o AUDIO IN ® *6 When connecting a PC to the PC IN, set "PC Audio Select" to "PC iN". (See page 21.) *7 Depending on the board, only video signals may be output. [n this case, in addition to connecting an HDMI certified cable to the HDM[ IN I terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO iN terminal and set "PC Audio Select" to "HDMI1 ". (See page 21.) The HDM[ [N terminals one/support digital signal. Refer to page 28 for a list of PC signals compatible with the TV. 12

control unit to turn the power on. o The Initial Installation starts when the TV powers on for the first time. if the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Setup menu on page 21. Press POWER on the TV or on the remote control unit again to turn the power off. o The TV enters standby and the image on the screen disappears. o If you are not going to use this TV tot a long period of time, be sure to remove the AC cord from the AC outbt. o Weak electric power is still consumed even when the TV is turned o_. When you turn on the TV for the first time, it will Air/Cable (Antenna setting) automatically memorize the broadcasting channels available Make sure what kind of connection is made with your TV in the region where you live. Perform the following steps when selecting "Air" or "Cable". before you press POWER on the remote control unit. 3 Press _1/_ to select "Air" or "Cable", and then 1. insert the batteries into the remote control unit. (See page press ENTER. to,) 2. Connect the antenna cable to the TV. (See page 10.) 3. Plug in the AC cord to the AC outlet. (See page 9.) j I Language (Language setting) Select from among 3 languages: English, French and Spanish. 1 Press 41/1_ to select the desired language listed on the screen, and then press ENTER. CH Search (Channel search) Channel auto search makes the TV look tot all channels viewabb in the set area, 4 After "Air/Cable" has beet set, the cursor moves to "CH Seareh". Press _,, or ENTER to start channel search. TV Location Select "Home" or "Store" for the location where you plan to install the TV. This product qualifies for ENERGY STAR in Home mode default setting. 2 Press _/_- to select "Home" or "Store", and then press ENTER. o If no channel is found, confirm the type of connection made with your TV and try "EZ Setup" again. (See page 21.) o For changing the settings of the Initial Installation, perform "E7 setup" on the Setup menu on page 21. Home: AV Mode is set to "STANDARD (ENERGY STAR)". Store: AV Mode is set to "DYNAMIC (Fixed)". o ENERGY STAR qualification is based on AV Mode "STANDARD (ENERGY STAR)". 13

by pressing POWER on the TV or on the remote control unit. (See page 13.) You can change channels by pressing CHA/V or 0-9, (DOT). Examples: To select a 1 or 2=digit channel number (e.g,, Channel 5): Press 5 _ ENT. To select a 3=digit channel number (e,g., Channel 115); Press 1 _ 1 > 5 _ ENT. To select a 4-digit channel number (e,g., Channel 22.1): Press 2 2 o (DOT) 1 _ENT. o When selecting a 1-digit channel number, it is not necessary to press 0 before the number, o When you enter C_9 only, channel selection will be made if there is no operation within a few seconds. o If you push "0" by itself, nothing will happen. o Complete the above steps within a few seconds. o When you enter C_9 and • (DOT), channel selection will be made if there is no operation within a few seconds. You can select 4 preset favorite channels in 4 different categories. Press A, B, C or D. While watching the TV, you can toggle the selected channels by pressing A, B, C and D. See page 25 for details of favorite channel settings. You can change the volume by pressing VOL +/- on the TV or on the remote control unit. To increase the volume, press VOL +. To decrease the volume, press VOL -. @} Audio status When "Output Select" is set to "Variable", the indicator on the screen changes as shown below. See page 25 for details on the Output Select function. Mutes the current sound output. Press MUTE. "(_" will be displayed on the screen for 40 seconds, and the sound is silenced. The Mute function will not be canceled even atter the icon has disappeared. Press MUTE or VOL +/- to cancel the function. When the Mute function is canceled, the volume returns to the previous level. Allows you to set a time when the TV automatically switches to standby. Press SLEEP. The remaining time displays when the sleep timer has been set. Each time you press SLEEP, the remaining time switches as shown below. Off -'_ 5 -'_ 10 -'_ 15 -_ 30 -'_ 45 240 _ 180 _ 120 _ 90 _ 60 When set, the time automatically starts counting down, Ifyou want to adjust the sleep timer, you can press SLEEP twice then change the time setting. When it is I minute before the time expires, the remaining time will start to appear. Select "Off" by pressing SLEEP to cancel the sleep timer. The %/will enter standby when the remaining time reaches 0. Press FLASHBACK to switch to the previously tuned channel. Press FLASHBACK again to switch back to the currently tuned channel. FLASHBACK will not work if no channel has been changed after the TV is turned on. This function is available only when the input source is TV. 14

options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected. There are seven pre-set AV Modes: STANDARD (ENERGY STAR), MOVIE, GAME, PC, USER, DYNAMIC and DYNAMIC (Fixed). You can use USER Mode to create customized settings for each TV input. These settings will be automatically saved on each input for convenience. Press AV MODE. Current AV Mode displays. o Press AV MODE again before the mode displayed on the screen disappears. The mode changes as shown below: Example: When using the VIDEO IN or COMPONENT IN terminals SfANDARD (ENERGY SfAR) _ MOVIE _ GAME l I DYNAMIC i DYNAMIC (Fixed)i USER ExampNe: When using the HDMI IN terminals s fANDARD (ENERGY SfAR) iMOVIE i GAME t ! PC _ DYNAMIC _ DYNAMIC (Fixed)_USER ExampNe: When using the PC IN terminal STANDARD (ENERGY STAR)_ USER _ PC t H STANDARD (ENERGY STAR): For a highly defined image in normal lighting. MOVIE: For a movie, GAME: Lowers image brightness for easier viewing. PC: For PC. USER: Allows the user to customize settings as described above. DYNAMIC (Fixed): Changes the image and sound settings to the factory preset values. No adjustments are allowed. DYNAMIC: For a clear cut image emphasizing high contrast, useful for sports viewing. o You can select a different AV Mode for each input, allowing you to optimize your picture quality for different devices. (For example, select STANDARD (ENERGY STAR) for watching TV in a normal lighting environment.) o If power is lost, USER Mode settings may need to be reset. [] MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information. You can enjoy Hi-Fi stereo sound or SAP broadcasts where available, o Stereo broadcasts: View programs like live sporting events, shows and concerts in dynamic stereo sound. o SAP broadcasts: Receive TV broadcasts in either MAIN or SAP sound, MAIN sound: The normal program soundtrack (either in mono or stereo). SAP sound: Listen to a second language, supplementary commentary or other information. (SAP is mono sound.) If stereo sound is difficult to hear. o Obtain a clearer sound by manually switching to fixed mono sound mode. You can change MTS as shown below to match the television broadcast signal. Press AUDIO to toggle between audio modes. Examples: when receiving MTS and SAP STEREO mode: STEREO_ MONO STEREO + SAP mode: STEREO_SAP_ MONO m MONO mode: MONO [] DigitaE broadcasting audio mode The types ot audio transmitted ina digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track. 1 Press AUDIO. • A list ot selectable audio is displayed, 2 Press A/T" to select audio. o MTS only operates while in TV mode. 15

and freeze a moving image that you are watching. Press FREEZE. o A moving image is captured. o Press FREEZE again to cancel the function. o When this function is not available, "No displaying still image availabb." will display. o The still image automatically goes out after 30 minutes. o Ifyou are using the freeze function and a broadcast activates the V CHIP BLOCK, the freeze function will be canceled and a V CHIP BLOCK message will appear. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1 Press iNPUT. • A list of selectabb sources appears. 2 Press INPUT again or press A/_' to select the input source. o Each time INPUT is pressed, the input source toggles. HDMI1 _, HDMI2 _ HDMI3 t l rv _,,,,,m PO iN_m,,,,,_ COMPONENT _VlDEO o An image from the selected source automatically displays. o If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand. o See page 12 for external equipment connection. o Press PC to switch to an image from the PC. Displays channel information being viewed. Press DISPLAY. Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider). It is a more flexible system than the original Closed Caption system, because it allows for a variety of caption sizes and font styles. When the Digital Closed Caption service is in use, it will be indicated by the appearance of DTVCC. Not all programs and VHS videotapes offer closed captions. Please look for the "[_]" symbol to ensure that captions will be shown. In the Closed Caption system, there can be more than one caption service provided. Each is identified by its own number. The "CC1 ", "CC2", "CC3" and "CC4" services display subtitles of TV programs supenmposed over the program's picture. In the Closed Caption system, the TEXT1, TEXT2, TEXT3 or TEXT4 services display text that is unrelated to the program being viewed (e.g., weather or news). These services are also superimposed over the program currently being viewed. Press CC. On: Displays the closed caption. Off: Does not display the closed caption. o You can adjust the closed caption screen appearance to your preference. (See page 25.) Allows you to gain quick access to PC mode. Press PC. You can operate the on-screen display menu by using the following buttons. MENU: Displays the menu screen. ,i,/Y/,,9/l_, ENTER: Select a desired item on the screen. RETURN: Returns to the previous menu screen. EXIT: Turns off the menu screen. o For operating the on-screen display menu, see "Menu Operation Buttons" on page 18. 16

screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at the top and bottom ot the screen, Dot by Dot (Fall Screen) Dot by Dot (1080i/p only): Detects the resohJtion ot the signal and displays an image with the same number of pixels on the screen. Full Screen (720p enmy): You can select "Full Screen" only when receiving a 720p signal. Zoom Suitable for viewing wide- screen 2.35:1 aspect ratio programs in full screen. S,Stretch (Smart stretch) Suitable for stretching 4:3 programs to fill the screen. o When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please change view mode to correct this. Zoom [] For 4:3 programs Example: Screen size images Side Bar Suitable tor viewing conventional 4:3 programs in their normal format. S.Stretch (Smart stretch} Suitable for stretching 4:3 programs to fill the screen. Suitable for viewing wide- screen 2.35:1 anamorphic DVDs in full screen. Stretch This mode isusefulfor 1.78:1 DVDs.Whenviewing 1.85:1 DVDs,stretch mode will still show very thin black bands at the top andboltom 01the screen. [] For PC input mode , Connect the PC before making adjustments. (See page 12.} o Sebctabb screen size may vary with input signal type. Example: Screen size images Normal Stretch FOq Keeps the original An image fully fills the aspect ratio in a full screen. screen display. Dot by Dot El Detects the resolution of the signal and dispbys an image with the same number of pkels on the screen. 17

is an operational guide for the remote control. The icon of the button | operated by the remote control will turn white. J 1 Press MENU to display the MENU screen. 2 (t_ Press _/_. to select the desired menu. (25 Press A/Y to select a specific adjustment item. :_3_Press 4/1_ (or ,_,/_') to select or adjust the desired setting, and then press ENTER. 3 Press MENU to exit. Item displayed in light blue • This indicates the item currently selected. ® This indicates the current setting for the item. ® Item displayed in white • This indicates that the item can be selected. Item displayed in gray o This indicates that the item cannot be selected. There are various reasons why the items cannot be selected, but the main reasons are as follows: --Nothing is connected to the selected input terminal. --The function is not compatible with the current input signal. o Menu options differ inthe selected input modes, but the operating procedures are the same. o The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. o The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen. II iiii_:, Using the remote control Use the following buttons on the remote control to operate the menu. Using the control panel of the main unit You can also operate the menu with the control panel of the main unit. Button operations on the control panel correspond to the ones on the remote control as shown below. MENU: Press to open or close the menu screen. A/T/41/D,-: Press to select a desired item on the screen or adjust a selected item. ENTER: Press to confirm the settings of Reset. RETURN: Press to return to the previous step. _ i _ M E N U : MENU on the rer_ote control. INPUT: ENTER on the remote control CHA/V: Cursor A/T on the remote control. VOL + I- :Cursor _II_ on the remote control. 18

The screen brightens Contrast For less contrast For more contrast Brightness For less For more brightness brightness Color For less color For more color intensity intensity Tint Skin tones Skin tones become reddish become greenish Sharpness For less For more sharpness sharpness For resetting all Picture adjustment items to the factory preset values, press A/T to select "Reset", press ENTER, press 4/i_ to sebct "Yes", and then press ENTER. The current setting of AV Mode is displayed. (See page 15 for details of AV Mode settings.) Automatically adjusts the brightness of the screen. On:Display: Displays the OPC effect on the screen whib adjusting the brightness of the screen. On: Automatbaliy adjusts. Off: The brightness is f_xed at the value set in "Backlight". o When set to "On", the Optical Pbture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light. o When set to "On:Display", OPC effect displays on the screen while the OPC adjusts the screen brightness. o The OPC effect on the screen will not be displayed when "Closed Caption" is set to "On", even if you set "OPC" to "On:Display"[i II This TV provides various advanced functions for optimizing tlqe picture quality. For a better white balance, use color temperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone Use Motion Enhancement to view fast-action video more clearly. On(High)/On(Low}: For obtaining a clearer image. Off: Normal image. o "Motion Enhancement" may cause image noise. If this occurs, turn the function "Off". o When AV MODE is set to "GAME" or "PC", or PC format is being input, "Motion Enhancement" is not available. a This function provides high-quality playback of images originally encoded at 24 frames/second, such as films. Advanced(High)/Advanced(Low): Select a desired level to remove jerkiness from film contents. Standard: Detects, analyzes, converts film soume. Off: Normal viewing mode. o "Film Mode" does not function depending on input signal type. "Film Mode" does not function when you set AV MODE to "GAME" or "PC". "Standard" does not function depending on input signal type. Automatically adjusts the image contrast according to the scene. On: Automatically adjusts the image contrast. Off: No adjustment. Produces a clearer video image. Off: No adjustment High/Middle/Low: Sebct a desired bvel for viewing a chafer video image. The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the ()PC sensor can be set to a maximum of 16 and a minimum of -16. Max.: -15 through 16 Min,: 16 through 15 o The maximum setting cannot be set to a smaller number than the minimum setting. o The minimum setting cannot be set to a bigger number than the maximum setting. o Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small a You can display the product feature on screen. o This function will be cancebd when you press EXIT or RETURN on the remote control unit. • To enable this function, set "TV Location" to "Store". 19

with the following settings. Example Example Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio Decrease auclo from the right from the left speaker speaker , Audio menu is grayed out when "Output Select" is set to "Variable". (See page 25.) , For resetting all Audio adjustment items to the factory preset values, press _./T to select "Reset", press ENTER, press _/1_ to select "Yes", and then press ENTER. The current setting of AV Mode is displayed. (See page 15 for details of AV Mode settings.) The surround function produces Surround effect from the speakers. On: Makes it possible to enjoy natural, realistic surround sound. Off: Outputs the normal sound. , Audio menu is grayed out when "Output Select" is set to "Variable". (See page 250 , For some discs, setup may be required on your BD/DVD player. In this case, please refer to the operation manual of your BD/DVD player. This function allows you to enjoy bass-enhanced sound. On: Bass Enhancer function is on. Off: Normal sound. , Audio menu is grayed out when "Output Select" is set to "Variable". (See page 25.) This function allows the TV to automatically shut the power down when there is no signal received. Enable: The power will automatically shut down if there is no signal for 15 minutes. Disable: This function does not work. o When it is I minute before the power shuts down, the remaining time will start to appear. o When a TV program finishes, this function may not operate. You can set the time length the TV takes to automatically shut the power down when there is no operation. 30 rains/3 hours/Disable o When it is 1 l_inute before the power shuts down, the remaining time will start to appear. 2O

again, even after setting up the preset channels. Language: Select from among 3 languages (English, French and Spanish). TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifies for ENERGY STAR in Home mode default setting. Home: AV Mode is setto "STANDARD(ENERGYSTAR)". Store: AV Mode isset to "DYNAMIC(Fixed)". = ENERGYSTARqualificationis basedon AV Mode "STANDARD(ENERGYSTAR)". Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. o See Initial Installation on page 13 for setting each item. o If no channel is found, confirm the type of connection made with your TV and try "EZ Setup" again. ;_!_'_ ............ If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. CH Memory: You can select the channels to skip. Show/Hide: Removesthe checkmarks to letthe channelsbe skipped. Signal Strength: The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel. o See Initial Installation on page 13 for setting each item. o If no channel is found, confirm the type of connection made with your TV and try channel search again. Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press _1/1_ to select the new name for the input mode. m Setting the Names to Your Preference 1 Press 41/1_ to select "Custom". 2 Press A/T" to enter the desired characters. • You can use alphanumeric characters (including spaces or some symbols) to set the name to your preference. o If you press T when "Default" is selected, the "Custom" setting display appears. Determines whether the AUDIO IN terminal is used for PC IN or HDMI IN 1. HDMIt: Select this item when the audio signal is input via the HDMI IN 1 terminal using a DVFHDMI conversion cable. PC IN: Select this item when the audio signal is input via the PC IN terminal using an analog RGB cable (D sub 15 pin cable or VGA cable). o When "PC Audio Select" is set to "HDMI1 ", sound will not be produced if you use only an HDMFcertifled cable to connect HDMI compatible equipment. To produce sound, you should make an analog audio connection. • If you want to connect HDMFcompatible equipment using only an HDMFcertifled cable, set "PC Audio Select" to "PC IN". To watch an HDMI IN or PCqN equipment image, select "HDMI1 ", "HDMI2" or "HDMI3" from the INPUT SOURCE menu using INPUT on the remote control unit or on the TV. Enable: To use View Mode based on signal recognition, including an HDMI signal. Disable: No function. o Refer to your external equipment operation manual for the signal type. o When connecting a DVI HDMI conversion adapter/cable to the HDMI IN terminal, the image may not come in clearly. You can output digital audio to an AV arrlplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. PCM: The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM". Dolby Digital: The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital. 21

a language from the Setup menu. Select from among 3 languages: English. French and Spanish. _'_"_!_ ............ If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. Select "Yes". o After the reset has been completed, the power shuts oft and then comes back on. The screen will have returned to its original settings. o The Channel Setup settings will not be changed. o The Language settings will not be changed. o The Parental CTRL settings wJ, not be changed. o The TV Location settings will not be changed. Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number. On: Enables Parental CTRL Off: Disables Parental CTRL V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so autornatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. 1 Press A/T" to select the desired rating system, and then press I_ or ENTER. iii!i;_i_i_'_i _!i_!i_i _!i!!_!!_i_i_i_ii_ii_ii_ii_iiiiiiiiiiiiii_i_i_i_i_i_i_!i_i!iiiiiii_ii_ii_i_i!_i!_!_i_ii_ii_ii_ii_i_!i_i!i!_! ¸il¸il¸i_ii!_i!!ii!_i!i!!!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!_!i_i!_!_!_!_!! ¸libel ¸I:I Allows you to use a secret number to protect certain settings from being accidentally changed. iMPORTANT: Three conditions must be met to enable the V-Chip (see pages 22 to 24): 1.Secret No. is registered. 2.V-Chip/V-Chip (DTV Only) settings have been made. o The "V-Chip (DTV Only)" will only be selectable when a new rating system can be downloaded via digital broadcasting in the U.S. 3. "Status" is set to "On". [] New Secret No. Yeu can set and change the secret number by using 0-9. Input Secret Nez When you change the secret number. enter the old 4 digit secret number here. The cursor moves to "New Secret No.". New Secret No.: When you set the new secret number. enter the new 4-digit secret number here. The cursor moves to "Reconfirm". Reconfirm: Enter the same 4 digit number you set in "New Secret No.". [] Secret No. Clear You oar] clear your secret number. Yes: Your secret number is cleared. No: Your secret number is not cleared. . As a precautionary measure, make a note of your secret number and keep it in a familiar place. If the secret number is cleared, the Status setting automatically sets to "Off". "V Chip" and "Status" will not be selectable from the menu. 2 Press A/_" to adjust the item to your desired position. "Block" indicates the item is blocked. 3 Press MENU to exit. The U.S. has two rating systems tot viewing content: TV Parental Guidelines and movie ratings. The TV Parental Guidelines work in conjunction with the V CHIP to help parents screen out inappropriate television shows from their children. Movie ratings are used for original movies rated by the Motion Picture Association d America (MPM) as watched on cable TV and not edited tot television. The V CHIP can also be set to block MPM rated movies. The setting automatica,y enters "Block" for any ratings below your selection. If Status is not set to "On". the configuration settings will not work. 22

Guidelines Example Pressj,/T to adjust the item to your desired position. "Block" indicates the item is blocked. Press MENU to exit. Example When setting an individual content-based rating item: 1 Press _, or ENTER to access blocked content iterns from the currently selected age-based rating item. 2 PressA/Y to select an individual item, and then press ENTER to unblock it ("Block" is removed). Repeat the same steps for the other items. 3 Press _ or RETURN to register after all individual content rating items are set. Content FV V S L D (Fantasy (Violence) (Sexual (Adult (Sexually violence) situation) language) suggestive dialog) TV Y (All children) [] [] [] [] [] TV Y7 (Directed to eider children) X [] [] [] [] Suggested TV G (General audience) [] [] [] [] age TV PG (Parental Guidance suggested) X X X X TV 14 (Parents strongly cautioned) X X X X TV-MA (Mature audience only) X X X [] : The content rating can be set, but this rating is not normally broadcast by TV stations. X : Content rating can be set. [] MPAA (Voluntary movie rating system) Example G: General audiences, All ages admitted, PG: Parental guidance suggested. Some material may not be suitable tor children. PG-13: Parents strongly cautioned. Some material may be inappropriate tor children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions). NO-t 7: No one 17 and under admitted. X: X is an older rating that is unified with NC 17 but may be encoded in the data ol older movies. o Voluntary movie rating system only uses an age based rating. 23

and Tebcommunications Commission (CRTC) policy on viobnce in tebvision programming. o While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes. o When setting the V CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French ratings. [] Canadian English Ratings Example C: Children: Intended for younger children under the age of 8 years. Pays caretul attention to themes that could threaten their sense of security and well being. 08+: Children over 8 years old: Contains no portrayal of violence as the preterred, acceptable, or only way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on the screen. G: General: Considered acceptable for all age groups. Appropriate viewing for the entire tamily, contains very little violence, physical, verbal or emotional. PG: Parental Guidance: Intended tot a general audience, but may not be suitable for younger children (under the age of 8) because it could contain controversial themes or issues. 14+: Over 14 years: Could contain themes where violence is one of the dominant elements ot the storyline, but it must be integral to the development of plot or character. Language usage could be profane and nudity present within the context of the theme. 18+: Adults: Intended tor viewers 18 years and older and might contain depictions ot violence, which while related to the development ot plot, character or themes, are intended for adult viewing. Could contain graphic language and portrayals of sex and nudity. E: Exempt programming. [] Canadian French Ratings Example G: General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a humorous or unrealistic manner. 8arts+: General but inadvisable for young children: May be viewed by a wide public audience, but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations. Recommended for viewing with parent. 13ans+: Over 13 years: Could contain scenes ot frequent violent scenes and therefore recommended for viewing with parent. 16ane+: Over 16 years: Could contain trequent violent scenes and intense violence. 1Sans+: Over 18 years: Only tot adult viewing. Could contain frequent violent scenes and extreme violence. E: Exempt programming. [] How to temporarily release the V-CHIP BLOCK When the V-CHIP BLOCK is working and censors a broadcast, the message "V-CHIP HAS BEEN ACTIVATED." appears and the secret number setting box will be displayed under the message. o Enter the 4 digit secret number by using 0_9. Now V CHIP BLOCK is temporarily released. [] Reactivating the temporariEy released V-CHIP BLOCK You can reactivate the temporarily released V-CHIP BLOCK as shown below. o Select "Status" setting from the Parental CTRL menu to reactivate BLOCK. (See page 22.) o Select "V Chip" setting ("TV Guidelines", "MPAA", "Can. English Ratings" or "Can. French Ratings") from the Parental CTRL to reactivate BLOCK. (See pages 22 to 24.) o Switch ofl the TV power. o Performing any of the three above will activate the V CHIP BLOCK. 24

program, you can turn the screen off and enjoy audio only. On: Audio is output without screen image. Off: Both screen images and audio are output. o The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE) is pressed. When this function is set to "On", tile LED on the front of the TV turns on. If you select "Off" for tile function, the confirmation screen appears. Selecting "Yes" on the screen will turn the LED off. o "On" is the factory preset value. Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL+/- on the remote control unit or on the TV. Sound via the AUDIO OUT terminal is not adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUT terminal is adjusted with VOL +/- on the remote control unit or on the TV. Sound via speaker is muted. N Select the video signal system corrlpatible with your equipment from the list below: Auto/NTSC 3.58/PAL- M/PAL- N o "Color System" can only be set for the VIDEO IN. You can select a desired Closed Caption. Off/CCI-CC4/TEXTf-TEXT4 You can select a desired service. Off/Servicer-Service6 mMode Default: The default settings will be displayed. Custom: You can adjust the closed caption screen appearance to suit your preference. The following items can be adjusted. Font Style/Font Size/Font Edge/Edge Color/ Font Color/Background Color/Font Opacity/ Background Opacity This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register" and then press ENTER. Press _./T/4/ to select the position in the category, and then press ENTER to register. To delete your favorite channel: Select "1 Data Clear" and then press ENTER. Press A/T/_I/I_ to select the channel you want to delete, and then press ENTER. Select "Yes" and then press ENTER. To delete all the favorite channels, select "All Data Clear". o Before setting the channel, select the channel you want to register as a favorite channel. Ordinarily you can easily adjust the picture as necessary to change image position using "Auto Sync.". In some cases, however, manual adjustment is needed to optimize the image. H-Position Centers the image by moving it to the left or right. V-Position Centers the image by moving it up or down. Clock Adjust when the image flickers with vertical stripes. Phase Adjust when characters have low contrast or when the image flickers. •%%_, • For resetting all "Fine Sync." adjustment items to the factory preset values, press _./T to select "Reset", press ENTER, press 41/_- to select "Yes", and then press ENTER. o It is not necessary to adjust the "Clock" or "Phase" when a d_g_ta_ s_gna_ Jsbe,_g ,_put, so_t.......tbeselected. o The default cursor position may not be in the center, You can switch the Closed Caption modes, because the screen position variable ranges may be On: Displays the closed caption, asymmetrical. Off: Does not display the closed caption. 25

manually to display properly. The pair of input signals (resolutions) 3 Press A/_' to select "Software Update", and then in the list below is not distinguishable when received, press I_ or ENTER. In such a case, you have to set the correct signal Example manually. After setting once, it will display when the same signal (resolution) is input again. 11024 x 768 1360 x 768 I o You can only select the "Input Signal" on the Option menu when receiving one of the 2 input signals listed above. For automatically adjusting the PC image. Yes: Auto Sync. starts. No: This function does not work. o "Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing "Auto Sync.". o Be sure to connect the PC to the TV and switch it on before startEng "Auto Sync.". Tile current version of the TV software is displayed. This function allows software updates by inserting a USB mernory device with tile update file into the USB for SERVICE terminal on tile TV. To check for the availability of a software update, visit htt p://v,_/w.sharpusa.corn/products/support/. If you have any questions, please call 1-800-BE-SHARP (1-800-237-4277). • Do not remove the USB memory device or unplug the AC cord while the software is being updated. • Be sure to properly follow the whole procedure described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail. Software Update 4 Press 41/1_ to select "Yes", and then press ENTER to start updating. ! Example • DO not remove the USE} memory device or unplug the AC cord while the software is being updated. 5 When the software is successfully updated, a screen is displayed indicating that the update process is completed. A few seconds later, the TV restarts automatically. Example 1 Insert the USB memory device with the update file into the USB for SERVICE terminal on the TV. o When the software is being updated: The LED on the TV blinks. o When the software update is completed: The LED on the TV blinks faster. o If the update has tailed, check the file in the USB memory device, reinsert the USB memory device correctly, and then try Software Update again. 6 Remove the USB memory device after the TV has restarted. 26

o Check if you pressed POWER on the remote control unit. ,_ Page 13 If the indicator on the TV does not light up, press POWER on the TV. o Is the AC cord disconnected? _ Page 9 o Has the power been turned on? ,_ Page 13 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation, in this case, operate the unit atter first turning off the power of the TV or unplugging the AC cord and rephJgging it in after 1 or 2 minutes. o Remote control unit does not o Are batteries inserted with polarity ( , -) aligned? o Page 10 operate, o Are batteries worn out? (Replace with new batteries.) o A_e you using it under strong or fluorescent lighting? o Is a fluorescent light ilhJminated near the remote control sensor? o Picture is cat off/with sidebar o Is the image position correct? ,_ Pages 25 and 26 screen, o Are screen mode adjustments such as picture size made correctly? _ Page 17 o Strange color, light color, or o Adjust the picture tone. _ Page 19 color misalignment o Is the room too bright? The picture may look dark in a room that is too bright. o Power is suddenly tamed off. o Is the sleep timer set? _ Page 14 o Check the power control settings. ,_ Page 20 o The unit's internal temperature has increased. Remove any objects blocking vent or clean. o No sound o Is connection to other components correct? _ Page 12 o Is the volume too low? ,_ Page 14 o Is "Variable" selected in "Output Select"? ,_ Page 25 • Have you pressed MUTE on the remote control unit? _ Page 14 o Check the audio output of the connected external equipment. Is the vohJme too low or mated? o When external equipment is connected via an HDMI cable, you may need to configure the audio to be output through the HDMI cable. o When audio is not output from external equipment connected to the PC IN or HDMI IN 1 terminal, check the "PC Audio Select" setting. _ Page 21 o Even when external equipment is connected using an HDMI certified cable, an audio cable connection may be required depending on the type of equipment and the media being played back. In this case, in addition to connecting an HDMI certified cable to the HDMI IN 1 terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "PC Audio Select" to "HDMI1 ". _ Page 21 o When connecting a PC via an HDMI-certified cable, check the tollowing: Is the audio output of the PC configured correctly? Check the audio output settings and output audio tormat in Sound Properties on the PC. Only PCM format audio can be output. Compressed audio (with a sampling rate of 32kHz, 44.1kHz, or 48kHz) and DTS format audio cannot be output. Depending on the board, one/video signals may be output. In this case, in addition to connecting an HDMI certified cable to the HDMI IN 1 terminal, connect a e 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "PC Audio Select" to "HDMI1 ". _ Page 21 o If you are using a DVl HDMI conversion cable to connect external equipment to the TV, check the tollowing: Is an audio cable connected? The DVI HDMI conversion cable is tor video one/. Connect a e 3.5 mm stereo minijack cable to listen to the audio. Is HDMI IN 1 being used? When the TV is connected to another HDMI IN terminal, the audio and video are not output together even if a e 3.5 mm stereo minijack cable is connected to the shared AUDIO IN terminal tor PC IN and HDMI IN 1. Is "PC IN" selected in "PC Audio Select"? _ Page 21 27

poor. o The TV sometimes makes a cracking sound. Possible Solution o o o o Is connection to other components correct? ,,_ Page 12 Is the correct input selected? _ Page 16 Is "On" selected in "Audio Only"? _ Page 25 If the PC image is not displayed, check the tollowing: When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. Check the resolution setting on the PC. Is a non compatible signal being input? "PC Compatibility Chart" below , To enjoy HD images from external equipment, you are required to set up HDMI connection or component connection. , If the program content is not of HD quality, HD images cannot be displayed. Check that the program you are viewing provides HD images. , The HD cable/satellite set top box may need to be configured to output HD images via cable/satellite. , The cable/satellite broadcast may not support a signal resolution of 1080p. , This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV's performance. The example of an error message Possible Solution displayed on a screen o Failed to receive broadcast, o Check the antenna cable. Check that the antenna is correctly setup. It is necessary to set the PC correctly to display XGA and WXGA signal. PC Resolution Horizontal Frequency 720 x 400 31.5 kHz 31.5 kHz VGA 640 x 480 37.9 kHz 37.5 kHz 35.1 kHz 37.9 kHz SVGA 800x 600 48.1 kHz PC 46.9 kHz 48.4 kHz XGA 1024 x 768 56.5 kHz 60.0 kHz WXGA 1360 x 768 47.7 kHz SXGA 1280 x 1024 64.0 kHz 1080p 1920 x 1080 67.5 kHz J VGA and XGA trademarks of International Business Machines registered Corp. are Vertical Frequency 70 Hz 60 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz 60 Hz 60 Hz VESA Standard O O O O O O O O O O O O CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 Select "Parental CTRL" on the Setup menu to display the secret number screen. (For operating the on- screen display menu, see page 18.) 2 Press and hold both CR/X. and VOL + on the TV simultaneously until the message appears on the screen. The secret number is I I I I I m o As a precautionary measure, make a note of your secret number above, and keep it in a sate place. 28

60" Class (60 _/s2"Diagonal) panel Resolution 2,073,600 pbxels(1,920 x 1,080) TV standard (CCIR) American TV Standard ATSC/NTSC System VHF/UHF VHF 2 13ch, UHF 14 69ch CATV 1-135ch (non-scrambled channel only) TV Receiving DigitalTerrestrial 2 69ch Function Channel Broadcast (8VSB) Digitalcable*_ 1 135ch (non-scrambled channel only) (64/256QAM) Audio multiplex BTSC System Audio out 10W x 2 HDMI IN 1 HDMI in with HDCP, Audio in (e 3.5 mm stereo minijack) HDMI IN 2 HDMI in with HDCP COMPONENT IN COMPONENT in PC IN ANALOG RGB (PC) in (15-pin mini D sub female connector), Rear Audio in (e 3.5 mm stereo minijack) ANT/CABLE 75 £_Unbalance, F Type x 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE) Terminals AUDIO IN Audio in (e 3.5 mm stereo minijack) DIGITALAUDIOOUT Optical Digital audio out x 1 (PCM/Dolby Digital) AUDIO OUT Audio out HDMI IN 3 HDMI in with HDCP Side VIDEO IN AV in USB for SERVICE So.are update OSD language English/French/Spanish Power Requirement AC 120 V, 60 Hz On Mode Power 107 W 96 W Power Consumption 214 W (0.2 W Standby with AC 120 V) 178 W (0.2 W Standby with AC 120 V) TV + stand 82.7 Ibs./37.5 kg 61.7 Ibs./28.0 kg Weight TV only 76.1 Ibs./34.5 kg 55.1 Ibs./25.0 kg Dil._]ension*2 TV + stand 62 S9/64 _( 38 19/64X 14 _/_ inch 54 _9/64X 33 _/2 X 14 _/e4 inch (W x H x D) TV only 62 89/64_( 37 21/64X 3 9/82inch 54 19/64_( 32 17/32X 3 1/32inch Operating temperature 32°F to I 104°F (0°C to I 40°C) Emergency alert messages via Cable are unreceivable. *2 The dimensional drawings are shown on the Spanish operation manual. o As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. o On Mode Power Consumption is measured according to Energy Star program requirements for televisions. Cautions regarding use in high and low temperature environments . When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. o Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: -4°Fto 140°F -20°Cto i60°C 29

License for This Product [] Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. [] Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties. [] Obtaining source code Some of the open source software licensors require the distributor to provide the source code ,with the executable software components. For information on obtaining the source code for the open source software, and other license agreement information, visit the following website: http://www.sharpusa.corn/software We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed. [] Acknowledgements The following open soume software components are included in this product: • SIL OPEN FONT LICENSE Version 1.0/Bitstream Vera Fonts/LARABIE FONTS [] Software Copyrights SIL OPEN FONT LICENSE Version 1.0 This Font Software is Copyright © 2003-2005, SIL International (http://scripts.sil.org/). All Rights Reserved. Bitstream Vera Fonts Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts accompanying this license ("Fonts") and associated documentation files (the "Font Software"), to reproduce and distribute the Font Software, including without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons to whom the Font Software is furnished to do so, subject to the following conditions: The above copyright and trademark notices and this permission notice shall be included in all copies of one or more of the Font Software typefaces. The Font Software may be modified, altered, or added to, and in particular the designs of glyphs or characters in the Fonts may be modified and additional glyphs or characters may be added to the Fonts, only if the fonts are renamed to names not containing either the words "Bitstream" or the word "Vera". This License becomes null and void to the extent applicable to Fonts or Font Software that has been modified and is distributed under the "Bitstream Vera" names. The Font Software may be sold as part of a larger software package but no copy of one or more of the Font Software typefaces may be sold by itself. THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFTWARE. Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Font Software without prior written authorization from the Gnome Foundation or Bitstream Inc., respectively. For further information, contact: fonts at gnome dot org. LARABIE FONTS This Font Software is Copyright © 1996-2001, Ray Larabie. All Rights Reserved. 3O

Sharp Authorized Service, or to obtain product literature, accessories, suppties, or customer assistance, please call 1-800+BE-SHARP. LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the "Product"), when shipped _n its odginal container, w_ll be free from defective workmanship and materials, and agrees that it w_ll, at its option, either repe_r the defect or replace the defective Product or part thereof with a new or remanufactured equNalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product or Efthe serial number or model number affixed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover instaE_at_on or signal reception problems. This limited warranty w[EEnot appEy _f the Product has been or _s being used in a commerciaJ setting or appHcaEon; tMs warranty is meant solely for the non commercEaE, beusebeld use of the Product by consumers _n their home or residence. If you intend to or aJreedy use tMs Product for commercEal purposes or in a commerciaJ setting, there are warranties available to cover your use of this Product, the terms of which may vary. Please contact 1-EE8-GO-SHARP for further _nformation. In order to enforce your dghts under this Hmited warranty, you should follow the steps set forth below. You must be able to provide proof of purchase to the servicer, wMch proof must include the date of purchase. To the extent permitted by applicabEe state law, the warranbes set forth are in Heu of, and exdusNe of, all other warranties, express or implied. Specgica_Ey ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND IMPUED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABIUTY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPUED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPUED WARRANTIES IS UMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. The warranties gNen here_n shatl be the sole and exctusNe warranties granted by Sharp and shall be the sole and exclusive remedy avaEEable to the purchaser and only for the time periods set forth herein. No other representations or promEses made by anyone are permEtted. Correction of defects, _n the manner and for the peded of time desedbed herein, sha_ constitute complete fulfi_lment of aU Habi_bes and respensibiHties of Sharp to the purchaser w_th respect to the Product, and shal_ constitute full satisfaction of aH claims, whether based on contract, negligence, stdct liability or otberw_se. Sharp does not warrant nor shah Sharp be liable, or _n any way respensiMe, for Products which have been subiect to abuse (including, but not _im[ted to, _mproper vo_tape), accident, misuse, negligence, lack of reasonable care, a_teration, medg_cation, tampering, misuse, _mproper operation or maintenance or any damages or defects _n the Product which were caused by repairs or attempted repe_rs performed by anyone other than a Sharp authorized servicer. Nor sha_l Sharp be Hab_e or in any way respensib_e for any _ncidenta_ or consequen tia_ economic or property damage. Some states do not allow l_m_ts on warranties or on remedies for breach _n certain transactions; _n such states, the l_mits herein may not apply. THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO. Model Specific Section Your Product Model Number & Description: LC 70LEEEOU/LC 60LE550U LCD Color Television (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: Additional Exclusions from Warranty Coverage (if any): Wbere to Obtain Service: Wbet to do to Obtain Sen/ice: One (1) year parts and labor from the date of purchase. _n order for the Product to be serviced, the Product must be reed_ly available to the servicer, free and dear of any complex or non standard _nstaHation, mounting or other encumbrance which wou_d unreasonably interfere w_th servicing the Product. The ,servicer w_ll remount the Product after service, provided that such remounting _s not _nto a complex or non-standard installation. Any additional 1abor and matedals requited to remove anWor reinstall a Product above and beyond the foregoing are not covered by this warranty, may result in additional charges and are the responsibility of the consumer. image Retention resulting from a fixed imege being displayed for long periods of time is not covered by this Limited Warranty (see Operation Manual on how to prevent this). From a Sharp Authorized Servicer located in the United States. To find the Iocaben of the nearest Sharp Autbedzed Servicer, please call Sharp ton free at I 8OO BE-SHARR Contact your Sharp Author_ed Servicer to obtain in home service for this product. The Servicer win come to your _ocation and _f necessary remove the unit for repe_r at the ServicePs facility and return the set to you once completed. Be sure to have Proof of Purchase available. TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP OR VISIT www,sharpusa,com SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION 31

[] Sharp Elec_eda Ltd. ("Sharp") warrants to the first purchaser for this Sharp brand product ("Product"), when shipped in its original container and sold or distributed in Canada by Sharp or by an authorized Sharp dealer, and Product was not sold "as is" or "sales final" that the Product will during the applicable warranty period, be free from defects in material and workmanship, and will within the applicable warranty period, either repair the defective Product or provide the first purchaser a replacement of the defective Product. [] (a) Any d_ repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner's manual or other applicable Product documentation. I _ _e°dhaer aaresult °f any Pr°duct that has been tampered with' medified' adjusted °r repaired by any [] person other than Sharp, a Sharp authorized service centre or a Sharp authorized servicing dealer. [] _ua_Uret'_t°r: e result of th ..... f the Prod .... ,th it......... pecgied or approved by Sharp, including [] _c aningbut not limited to, head cleaning tapes and chemical cleaning agents. [] _ t, _aeSa:d ......... bleor peripheral i....... quired through ..... I .... f the Product, including but [] _e ote con rols.,_not limited to, earphones, remote controls, AC adapters, batteries, temperature probe, trays, filters, belts, dbbons, cables and paper. _ , .o .ct2.ao ........,orthathasboeodofaood .......dby.....,......d..... [] (f) An_ or repairs required as a result of damage caused by any external or environmental conditions, including but not limited to, transmission line/power line voltage or liquid spillage or acts of God. | ....,thootappropr,atomode,,ser,a, oumboro dCS oULmark,ngs [] (h) Any ProdUct rental or commercial purposes. I (_, upand/or programming charges. [] Now to get _ranty service may be obtained upon delivery of the Product, together with proof of purchase (including date of [] purchase) a_s limited warranty statement, to an authorized Sharp service centre or an authorized Sharp servicing dealer. In | __ctrO/Ohome warranty service will be carried out to locations accessible by on-road service vehicle and within 50 km of an authorized Sharp service centre on any Sharp Television with the screen size of 42" or larger and on any Sharp Over-The-Range Microwave Oven or Home Use _ _ud_ngCany Sharp deal ......... i..... tre) is aL_thorized to extend, erllarge or transfer thi ....... ty | _w Ilbe espcon behalf of Sharp. The purchaser will be responsible for any and all removal, reinstallation, transportation and insurance costs incurred. | _d warrrar/ty ........ ptf ........... purch ..... dorqiciled in Quebec, in lieu of arid ..... pt to the | extent prohibited by applicable law, Sharp disclaims all other warranties and conditions, express or implied, whether arising by law, statute, by course of dealing or usage of trade, including, without limitation, implied warranties or conditions of merchantability and/or quality, _ _/odrnon-infring ....... t. Lim,tations (not applicable t........... purch ..... domiciled in Quebec [] to t_nder Quebec law): (a) Sharp shall not be liable for any incidental, special, consequential, economic, exemplary or [] indirect damages of any kind or pature (including lost profits or damages for loss of time or loss of use or loss of data) arising from or in [] _pertorma ce ofanyconnection with the use or performance of a Product or a failure of a Product, even if Sharp is aware of or has been advised of the [] _T, )theremendiesdescr,bed in this limited ........ y ..... ,......... plete fulfill ........ f allobligati ...... d responsibilities of Sharp to the purchaser with respect to the Product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Some provinces may not allow the exclusion or limitation of certain damages, or limits on the duration or voiding of implied warranties or conditions; in such provinces, the exclusions and limits herein may not apply. This limited warranty is, except for consumer purchasers domiciled in Quebec, governed by the laws of the Province in Canada in which the purchaser has purchased the Product. For consumer purchasers domiciled in Quebec this limited warranty is governed by the laws of Quebec. i _!he date of original purchase): Parts & Labour (excepti ..... ted) Audio Product I year BIu-Ray Product t year [] LCDTVLCD TV I year [] Microwave O ..... year (mag ................... 4 additional ..... ) Air Purifier t year Portable Air Conditioner t year Plasmacluster Ion Generator I year 3D Glasses I year Wireless LAN Adapter 1 year "I) obtain the 1sameand address of 1he nearest Authorized Sharp Service Cenlre or Dealer, ol fbr more in[ommtion oll this Lhnited V/a_anty, Sharp Extended Warranty ()_er_, Sharp Canada Produc_s ol Accessol y Sales, please contact Sharp: • By writing to Sharp Electronics Of Canada Ltd. at 335 Britannia Road East Misaissauga, Ontario L4Z lW9 _ site ..... hai'p.ca _ _ THIS LiMiTED WARRANTY iS VALID ONLY _N CANADA Revision 01/01/t2 32