Reebok Competitor Rt 5.1 Treadmill Operation & User’s Manual

Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.reebokservice.com/ registration. CUSTOMER CARE For service at any time, go to www.reebokservice.com. Or call 1-877-994-4999 Mon.––Fri. 6 a.m.––6 p.m. MT Sat. 8 a.m.––4 p.m. MT Please do not contact the store. Serial Number Decal

This drawing shows the locations of the warning decals. If a decal is missing or illegible, call the telephone number on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decals may not be shown at actual size. REEBOK and the Vector Logo are registered trademarks and service marks of Reebok. This product is manufactured and distributed under license from Reebok International. WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover TABLE OF CONTENTS

that all users of this treadmill are adequately informed of all warnings and precautions. 2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 3. Use the treadmill only as described in this manual. 4. The treadmill is intended for home use only. Do not use the treadmill in any commercial, rental, or institutional setting. 5. Keep the treadmill indoors, away from mois- ture and dust. Do not put the treadmill in a garage or covered patio, or near water. 6. Place the treadmill on a level surface, with at least 8 ft. (2.4 m) of clearance behind it and 2 ft. (0.6 m) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. 7. Do not operate the treadmill where aerosol products are used or where oxygen is being administered. 8. Keep children under age 12 and pets away from the treadmill at all times. 9. The treadmill should be used only by per- sons weighing 300 lbs. (136 kg) or less. 10. Never allow more than one person on the treadmill at a time. 11. Wear appropriate exercise clothes while using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recom- mended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals. 12. Plug the power cord into a surge suppressor (not included), and plug the surge suppres- sor into an appropriate outlet (see page 17). To avoid overloading the circuit, do not plug other electrical devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. 13. Use only a surge suppressor that meets all of the specifications described on page 17. To purchase a surge suppressor, see your local REEBOK dealer, call the telephone number on the front cover of this manual, or see your local electronics store. 14. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, which may result in a fall and serious injury. 15. Keep the power cord and the surge suppres- sor away from heated surfaces. 16. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 26 if the tread- mill is not working properly.) 17. Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 19). 18. Never start the treadmill while you are stand- ing on the walking belt. Always hold the handrails while using the treadmill. 19. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. IMPORTANT PRECAUTIONS

device. Various factors, including the user’’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determin- ing heart rate trends in general. 21. Never leave the treadmill unattended while it is running. Always remove the key, press the power switch into the off position (see the drawing on page 6 for the location of the power switch), and unplug the power cord when the treadmill is not in use. 22. Do not attempt to move the treadmill until it is properly assembled. (See ASSEMBLY on page 8 and HOW TO FOLD AND MOVE THE TREADMILL on page 24.) You must be able to safely lift 45 lbs. (20 kg) to move the treadmill. 23. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. 24. Do not change the incline of the treadmill by placing objects under the treadmill. 25. Never insert any object into any opening on the treadmill. 26. Inspect and properly tighten all parts of the treadmill regularly. 27. DANGER: Always unplug the power cord immediately after use, before clean- ing the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized ser- vice representative only. 28. Over exercising may result in serious injury or death. If you feel faint or if you experience pain while exercising, stop immediately and cool down. SAVE THESE INSTRUCTIONS

REEBOK® COMPETITOR RT 5.1 treadmill. The COMPETITOR RT 5.1 treadmill offers an impres- sive selection of features designed to make your workouts at home more enjoyable and effective. And when you’’re not exercising, the unique treadmill can be folded up, requiring less than half the  oor space of other treadmills. For your bene t, read this manual carefully before using the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, please note the product model number and serial number before contacting us. The model number and the location of the serial num- ber decal are shown on the front cover of this manual. Before reading further, please review the drawing below and familiarize yourself with the labeled parts. BEFORE YOU BEGIN Handrail Upright Tray Key/Clip Power Switch Walking Belt Platform Cushion Foot Rail Power Cord Idler Roller Adjustment Screws Console Heart Rate Monitor Length: 5 ft. 10 in. (178 cm) Width: 2 ft. 10 in. (86 cm)

Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat- tached. Extra parts may be included. 1/4" x 1/2" Screw (3)––4 5/16" x 1" Screw (5)––4 5/16" x 1 1/4" Bolt (2)––2 #10 x 3/4" Screw (4)––2 #8 x 1" Tek Screw (6)––4 3/8" x 4" Screw (7)––4 3/8" x 1 1/2" Screw (8)––2 3/8" x 2" Bolt (9)––5 3/8" Nut (10)––5 3/8" Star Washer (11)––6 #10 Star Washer (12)––2 5/16" Star Washer (13)––8 Base Foot Spacer (92)––2 5/16" Flat Washer (108)––4 #10 x 3/4" Flat Head Screw (109)––2 #8 x 1/2" Screw (16)––18

to assemble your exercise equipment, call 1-800-445-2480. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you  nish all assembly steps. •• After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. •• Left parts are marked ““L”” or ““Left”” and right parts are marked ““R”” or ““Right.”” •• To identify small parts, see page 7. •• Assembly requires the following tools: the included hex keys one adjustable wrench one Phillips screwdriver scissors To avoid damaging parts, do not use power tools. ASSEMBLY 1. Go to www.reebokservice.com/registration on your computer and register your product. •• activates your warranty •• saves you time if you ever need to contact Customer Care •• allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) and register your product. 1

the Upright Wire (88). Attach a Wheel (93) to the Base (91) with a 3/8" x 2" Bolt (9) and a 3/8" Nut (10). Do not over- tighten the Nut; the Wheel must turn freely. Press a Base Cap (110) into the Base (91). 91 9 10 3 93 110 Plastic Tie Cut 88 2. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Upright Wire (88) to the Base (91). Locate a plastic tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach two Base Feet (89) to the Base (91) in the locations shown with two #8 x 1" Tek Screws (6) and two Base Foot Spacers (92). Then, attach the other two Base Feet (89) with two #8 x 1" Tek Screws (6). 2 91 6 53 89 89 6 6 6 89 92 89 88 Hole 92

(91). Be careful not to pinch the Upright Wire (88). Insert two 3/8" x 4" Screws (7) and a 3/8" x 1 1/2" Screw (8) with three 3/8" Star Washers (11) into the Right Upright. Partially tighten the 3/8" x 4" Screws (7) until the heads of the Screws touch the Right Upright (81); do not fully tighten the Screws yet. Partially tighten the 3/8" x 1 1/2" Screw (8). 91 81 88 11 11 8 7 5 4. Identify the Right Upright (81). Hold the Right Upright near the Base (91) as shown. See the inset drawing. Tie the wire tie in the Right Upright (81) securely around the end of the Upright Wire (88). Then, pull the other end of the wire tie until the Upright Wire is routed through the Right Upright. Wire Tie 88 81 91 88 4 Wire Tie 81 88

Insert two 3/8" x 4" Screws (7) and a 3/8" x 1 1/2" Screw (8) with three 3/8" Star Washers (11) into the Left Upright. Partially tighten the 3/8" x 4" Screws (7) until the heads of the Screws touch the Left Upright (80); do not fully tighten the Screws yet. Partially tighten the 3/8" x 1 1/2" Screw (8). With the help of a second person, tip the tread- mill so that the Base (91) is flat on the floor. 80 7 91 11 11 8 7 8. Identify the Left Base Cover (86) and the Right Base Cover (87), which are marked with stickers. Slide the Left Base Cover onto the Left Upright (80). Slide the Right Base Cover onto the Right Upright (81). Identify the Left Upright Cover (78) and the Right Upright Cover (79), which are marked with stick- ers. Slide the Left Upright Cover onto the Left Upright (80). Slide the Right Upright Cover onto the Right Upright (81). 87 81 86 79 8 80 78 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Wheel (93) to the Base (91) with a 3/8" x 2" Bolt (9) and a 3/8" Nut (10). Do not over- tighten the Nut; the Wheel must turn freely. Press a Base Cap (110) into the Base (91). 6 9 53 10 91 110 93

Upright (81) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (13), and a 5/16" x 1 1/4" Bolt (2). Do not fully tighten the Screws and Bolt yet. Attach the Left Handrail (84) in the same way. 10 80 85 84 2 2 5 5 13 13 81 11. Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Remove the two Screws (A). Next, lift off the Crossbar (107). Discard the two Screws. Remove and save the four 1/4" x 1/2" Screws (3). They will be used in step 13. 107 Console Assembly A 3 3 11 9. Cut the plastic ties in the Left Handrail (84) and the Right Handrail (85). If necessary, press the 5/16" Cage Nuts (31) back into place. Identify the Right Handrail (85), and hold it near the Right Upright (81). Insert the Upright Wire (88) through the bracket on the bottom of the Right Handrail. Pull the Upright Wire out of the end of the Right Handrail. 84 85 9 81 31 88 Tie 31 Tie

sole assembly near the Right Handrail (85). Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON- NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Assembly Console Wire Wire Tie 85 88 88 Console Wire 13 12. IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and do not overtighten the #10 x 3/4" Screws (4) or the #10 x 3/4" Flat Head Screws (109). Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (84, 85) with two #10 x 3/4" Flat Head Screws (109), two #10 x 3/4" Screws (4), and two #10 Star Washers (12) as shown. Start all four Screws, and then tighten them. 107 84 4 4 12 109 109 85 12 12

the two 3/8" x 1 1/2" Screws (8) (only one side is shown). Slide the Left Base Cover (86) and the Right Base Cover (87) downward. 15 86 7 87 8 14. Set the console assembly on the Left Handrail (84) and the Right Handrail (85). Be careful not to pinch any wires. Insert the excess Upright Wire (not shown) into the Right Handrail. Attach the console assembly with six #8 x 1/2" Screws (16), four 1/4" x 1/2" Screws (3), four 5/16" Flat Washers (108), and four 5/16" Star Washers (13) as shown. Start all ten Screws and then tighten them. See step 9. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Bolts (2). 84 14 Console Assembly 16 16 16 16 85 3 13 13 108 3 108

console assembly. Align the holes in the Left Upright Cover with the holes in the Left Upright (80). Attach the Left Upright Cover with three #8 x 1/2" Screws (16). Attach the Right Upright Cover (79) to the Right Upright (81) in the same way. 17 80 16 16 Console Assembly 78 81 16 79 16. Slide the Left Handrail Cover (83) onto the Left Handrail (84). Slide the Right Handrail Cover (55) onto the Right Handrail (85). Attach the Handrail Covers with two #8 x 1/2" Screws (16). 16 83 55 16 16 85 84

carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). 19. Raise the Frame (53) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (52) so that the large barrel and the latch knob are oriented as shown. Attach the Latch Bracket (51) and Storage Latch (52) to the Base (91) with two 3/8" x 2" Bolts (9) and two 3/8" Nuts (10). Attach the upper end of the Storage Latch (52) to the Frame (53) with a 3/8" x 2" Bolt (9) and a 3/8" Nut (10). Lower the Frame (53) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). 19 52 91 10 Large Barrel 9 53 10 51 9 Latch Knob 18. Attach the Left Tray (101) and the Right Tray (102) to the console assembly with four #8 x 1/2" Screws (16). 101 102 18 Console Assembly 16 16 16

HOW TO CONNECT THE POWER CORD Use a Surge Suppressor Your treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your home’’s power. Voltage surges, spikes, and noise interfer- ence can result from weather conditions or from other appliances being turned on or off. To decrease the risk of damaging the treadmill, always use a surge suppressor with the treadmill. To purchase a surge suppressor, see precaution 13 on page 3. Use only a surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must also be electri- cally rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill and serious injury to users. Plug in the Power Cord The treadmill must be grounded. If it should malfunc- tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. The treadmill power cord has a plug with a grounding pin (see drawing 1 on this page). Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. The outlet must be on a nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical devices, except for low- power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. IMPORTANT: The treadmill is not compat- ible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets. A temporary adapter may be used to connect the surge sup- pressor to a 2-pole receptacle if a properly grounded outlet is not available. The lug or wire extending from the adapter must be connected with a metal screw to a permanent ground such as a properly grounded outlet box cover. Some 2-pole receptacle outlet box covers are not grounded. Before using an adapter, contact a quali- fied electrician to determine whether the outlet box cover is grounded. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. DANGER: Improper connection of the power cord increases the risk of elec- tric shock. Do not modify the plug——if it will not fit an outlet, have a proper outlet installed by a qualified electrician. If you are unsure whether the treadmill is properly grounded, contact a qualified electrician. 1 Surge Suppressor Grounding Pin Grounded Outlet 2 Adapter 2-pole Receptacle Lug Grounding Pin Metal Screw

The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the con- sole will display instant exercise feedback. You can even measure your heart rate using the handgrip heart rate monitor. In addition, the console features the weight loss center and sixteen onboard workouts—— ve timed workouts, seven calorie workouts, and four distance workouts. Each workout automatically controls the speed and incline of the treadmill as it guides you through an ef- fective exercise session. The console also features the iFit interactive work- out system. The iFit system accepts iFit cards with workouts that help you achieve speci c  tness goals. For example, lose unwanted pounds with the 8-week Weight Loss workout. iFit workouts automatically con- trol the treadmill. iFit cards are available separately. To purchase iFit cards at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. iFit cards are also available at select stores. You can even listen to your favorite workout music or audio books with the console’’s stereo sound system while you exercise. To turn on the power, see page 19. To use the man- ual mode, see page 19. To use an onboard work- out, see page 21. To use the weight loss center, see page 22. To use an iFit workout, see page 23. To use the information mode, see page 24. To use the stereo sound system, see page 24. Note: The console can display speed and distance in either miles or kilometers. To  nd which unit of mea- surement is selected, see THE INFORMATION MODE on page 24. For simplicity, all instructions in this manual refer to miles. IMPORTANT: If there are sheets of plastic on the console, remove the plastic. To prevent damage to the walking platform, wear clean athletic shoes while using the treadmill. The  rst time you use the treadmill, observe the alignment of the walking belt, and center the walking belt if necessary (see page 28). CONSOLE DIAGRAM

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 17). Next, locate the power switch on the tread- mill frame near the power cord. Press the power switch into the reset position. IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and press the power switch into the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 24 to turn off the demo mode. Next, stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Then, insert the key into the console. After a moment, the displays will light. IMPORTANT: In an emergency, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully tak- ing a few steps backward; if the key is not pulled from the console, adjust the position of the clip. HOW TO USE THE MANUAL MODE 1. Insert the key into the console. See HOW TO TURN ON THE POWER at the left. 2. Select the manual mode. If the manual mode is not already selected, press the Manual Control button on the console. 3. Start the walking belt. To start the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons. If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph. Note: After you press the button, it may take a moment for the walking belt to reach the selected speed setting. If you press one of the numbered Quick Speed but- tons, the walking belt will gradually change speed until it reaches the selected speed setting. To stop the walking belt, press the Stop button. The time will begin to  ash in the display. To restart the walking belt, press the Start button or the Speed increase button. 4. Change the incline of the treadmill as desired. To change the incline of the treadmill, press the Incline increase or decrease button or one of the numbered Quick Incline buttons. Each time you press one of the buttons, the treadmill will gradually adjust to the selected incline setting. Reset Key Clip

The matrix——When you select the manual mode, the matrix will display a track that rep- resents 1/4 mile (400 m). As you exercise, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession. The left display——The left display will show the elapsed time, the incline of the treadmill, and the approximate number of calories you have burned for a few seconds each. Press the left Display button until the display shows the information that you are most interested in viewing. Note: When some workouts are selected, the display will show the time remain- ing in the workout instead of the elapsed time. The right display—— The right display will show the distance that you have walked or run and the speed of the walking belt for a few seconds each. Press the right Display button until the display shows the information that you are most interested in viewing. The display will also show your heart rate when you use the handgrip heart rate monitor (see step 6). To reset the console, press the Stop button, remove the key, and then reinsert the key. 6. Measure your heart rate if desired. Before using the handgrip heart rate monitor, re- move the sheets of plastic from the metal contacts on the pulse bar. In addition, make sure that your hands are clean. To measure your heart rate, stand on the foot rails and hold the pulse bar with your palms on the metal con- tacts; avoid moving your hands. When your pulse is detected, several dashes will appear and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. 7. Turn on the fan if desired. The fan features multiple speed settings. Press the fan increase or de- crease button to select a fan speed or to turn off the fan. Note: If the fan is on when the walking belt is stopped, the fan will turn off automatically after a few minutes. 8. When you are  nished exercising, remove the key from the console. Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest set- ting or you may damage the treadmill when you fold it to the storage position. Next, remove the key from the console and put it in a secure place. When you are  nished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill’’s electrical components may wear prematurely. Contacts Decrease Increase

1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 19. 2. Select an onboard workout. To select an onboard workout, press the Timed button, the Calories button, or the Distance button repeatedly until the desired workout appears in the display. When you select an onboard workout, the displays will show the maximum incline, the maximum speed, and the duration of the workout. In addition, a pro le of the speed settings of the workout will appear in the matrix. If you select a distance work- out, the distance will appear instead of the pro le. 3. Start the workout. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the  rst speed and incline settings of the workout. Hold the handrails and begin walking. Each workout is divided into segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/ or incline setting may be programmed for consecu- tive segments. During a timed workout or a calorie workout, the pro le will show your progress. The  ashing segment of the pro le represents the current segment of the workout. The height of the  ashing segment indicates the speed setting for the current segment. At the end of each segment, a series of tones will sound. If a new speed and/or incline setting is pro- grammed for the next segment, the new speed and/ or incline setting will  ash in the displays for a few seconds. The treadmill will automatically adjust to the new speed and/or incline setting. The workout will continue in this way until the last segment of the pro le  ashes in the display and the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting is too high or too low at any time during the workout, you can manu- ally override the setting by pressing the Speed or Incline buttons; however, when the next segment of the workout begins, the treadmill will auto- matically adjust to the speed and incline set- tings for the next segment. To stop the workout at any time, press the Stop button. The time will begin to  ash in the display. To resume the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 4. Follow your progress with the displays. See step 5 on page 20. 5. Measure your heart rate if desired. See step 6 on page 20. 6. Turn on the fan if desired. See step 7 on page 20. 7. When you are  nished exercising, remove the key from the console. See step 8 on page 20. Current Segment

1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 19. 2. Select a weight loss workout. To select a weight loss workout, press the 200 Cals button, the 300 Cals button, the 400 Cals button, or the 500 Cals button. When you select a weight loss workout, the displays will show the maximum incline and speed of the workout and the approxi- mate number of calories you will burn during the workout. If you have not entered your weight, press the Wt. increase and decrease buttons repeatedly to enter your weight. Each weight loss workout is divided into segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed and/or incline setting may be programmed for consecutive segments. 3. Start the walking belt. The weight loss workout will function in the same way as a distance workout (see step 3 on page 21). 4. Follow your progress with the displays. See step 5 on page 20. Note: The calorie goal is an estimate of the number of calories that you will burn during the workout. The actual number of calories that you burn will depend on various factors such as your weight. In addition, if you manu- ally change the speed or incline of the treadmill during the workout, the number of calories you burn will be affected. 5. Measure your heart rate if desired. See step 6 on page 20. 6. Turn on the fan if desired. See step 7 on page 20. 7. When you are  nished exercising, remove the key from the console. See step 8 on page 20.

To purchase iFit cards at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. iFit cards are also available at select stores. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 19. 2. Insert an iFit card and select a workout. To use an iFit workout, insert an iFit card into the iFit slot; make sure that the iFit card is oriented so the metal contacts are face-down and are inserted into the iFit slot. When the iFit card is correctly inserted, the iFit logo will light up. Next, select an iFit workout by pressing the iFit increase and decrease buttons next to the iFit slot. When you select an iFit workout, the displays will show the maximum incline and speed of the work- out and the approximate number of calories you will burn during the workout. Each iFit workout is divided into several segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed and/or incline setting may be programmed for consecutive segments. 3. Start the walking belt. Press the Start button or the Speed increase but- ton to start the workout. A moment after you press the button, the treadmill will automatically adjust to the  rst speed and incline settings of the workout. Hold the handrails and begin walking. During the workout, the voice of a personal trainer will guide you through the workout. If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- ride the setting by pressing the Speed or Incline buttons; however, when the next segment be- gins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 1 mph. When the next seg- ment of the workout begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment. 4. Follow your progress with the displays. See step 5 on page 19. 5. Measure your heart rate if desired. See step 6 on page 19. 6. Turn on the fan if desired. See step 7 on page 19. 7. When you are  nished exercising, remove the key from the console. See step 8 on page 19. CAUTION: Always remove iFit cards from the iFit slot when you are not using them. iFit Slot iFit Card iFit Logo

The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select miles or kilometers to measure distance, and to turn on and turn off the display demo mode. To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown: The left display will show the total number of hours that the treadmill has been used. The right display will show the total number of miles or kilometers that the walking belt has moved. Press the Stop button again to view the following information: The console features a dis- play demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a ““d”” will appear in the left display while the information mode is selected. To turn on or turn off the demo mode, press the Speed de- crease button. An ““E”” for English miles or an ““M”” for metric kilome- ters will appear in the right display. Press the Speed increase button to change the unit of measurement if desired. To exit the information mode, remove the key from the console. HOW TO USE THE STEREO SOUND SYSTEM To play music or audio books through the console’’s stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the con- sole through the audio jack. Plug one end of your audio wire into the audio jack on the console. Plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that your audio wire is fully inserted. Next, press the play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- ume on your personal audio player or press the volume increase and decrease but- tons on the console. If you are using a personal CD player and the CD skips, set the CD player on the  oor or another  at surface and not on the console. Decrease Increase

HOW TO FOLD THE TREADMILL To avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame  rmly in the location shown by the arrow below. CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight. 2. Raise the frame until the latch knob locks in the storage position. CAUTION: Make sure that the latch knob locks. To protect the  oor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C). HOW TO MOVE THE TREADMILL Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch knob is locked in the storage position. Moving the treadmill may require two people. 1. Hold the frame and one of the handrails, and place one foot against a wheel. 2. Pull back on the handrail until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface. 3. Place one foot against a wheel, and carefully lower the treadmill. HOW TO LOWER THE TREADMILL FOR USE 1. See drawing 2. Hold the upper end of the tread- mill frame with your right hand. Then, pull the latch knob to the left. IMPORTANT: Do not turn the latch knob. If necessary, push the frame forward slightly. Pivot the frame downward a few inches, and release the latch knob. 2. See drawing 1 at the left. Hold the metal frame  rmly with both hands, and lower it to the  oor. CAUTION: Do not hold the frame by the plastic foot rails, and do not drop the frame. Bend your legs and keep your back straight. Handrail Frame Wheel Frame 1 1 Latch Knob 2 Frame

the simple steps below. Find the symptom that applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. SYMPTOM: The power does not turn on a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 17). Use only a surge suppressor that meets all of the speci cations described on page 17. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets. b. After the power cord has been plugged in, make sure that the key is inserted into the console. c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown, the switch has tripped. To reset the power switch, wait for  ve minutes and then press the switch back in. SYMPTOM: The power turns off during use a. Check the power switch (see the drawing above). If the switch has tripped, wait for  ve minutes and then press the switch back in. b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for  ve minutes, and then plug it back in. c. Remove the key from the console, and then reinsert it. d. If the treadmill still will not run, please see the front cover of this manual. SYMPTOM: The console displays remain lit when you remove the key from the console a. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE INFORMATION MODE on page 24 to turn off the demo mode. SYMPTOM: The displays of the console do not function properly a. Remove the key from the console and UNPLUG THE POWER CORD. With the help of a second person, carefully tip down the Uprights (80, 81). There may be three #8 x 2" Screws (15) in the bottom of the Belly Pan (73). If there are, remove them. Note: A Phillips screwdriver with a shaft at least 5 in. (13 cm) long is required. Then, raise the Uprights (80, 81). Reset Tripped c 15 15 80 73 81 a

fully pivot the Motor Hood (61) off. Locate the Reed Switch (71) and the Magnet (48) on the left side of the Pulley (49). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If neces- sary, loosen the #8 x 3/4" Truss Head Screw (17), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (not shown) with the #8 x 3/4" Screws. Reattach the #8 x 2" Screws, if necessary. Run the treadmill for a few minutes to check for a correct speed reading. SYMPTOM: The incline of the treadmill does not change correctly a. Hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Press the Stop button and then press the Incline increase or decrease button. The tread- mill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline does not begin calibrating, press the Stop button again, and then press the Incline increase or decrease button again. When the incline is calibrated, remove the key from the console. SYMPTOM: The walking belt slows when walked on a. Use only a surge suppressor that meets all of the speci cations described on page 17. b. If the walking belt is overtightened, treadmill per- formance may decrease and the walking belt may become damaged. Remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened. c. Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may deterio- rate the walking belt and cause excessive wear. If you suspect that the walking belt needs more lubricant, see the front cover of this manual. d. If the walking belt still slows when walked on, see the front cover of this manual. Idler Roller Screws 2––3 in. b 61 1 Top View 48 17 71 49 1/8 in.

when walked on a. If the walking belt is off-center,  rst remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclock- wise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered. b. If the walking belt slips when walked on,  rst remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walk- ing belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened. a b

program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper inten- sity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise. To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the near- est ten years). The three numbers listed above your age define your ““training zone.”” The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise. Burning Fat——To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone. Aerobic Exercise——If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. WORKOUT GUIDELINES Warming Up——Start with 5 to 10 minutes of stretch- ing and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Training Zone Exercise——Exercise for 20 to 30 min- utes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise; never hold your breath. Cooling Down——Finish with 5 to 10 minutes of stretch- ing. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems. EXERCISE FREQUENCY To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exer- cise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life. WARNING: Before beginning this or any exercise program, consult your physi- cian. This is especially important for persons over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical device. Various factors may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determin- ing heart rate trends in general.

Description Key No. Qty. Description 1 16 #8 x 3/4" Screw 2 2 5/16" x 1 1/4" Bolt 3 4 1/4" x 1/2" Screw 4 2 #10 x 3/4" Screw 5 4 5/16" x 1" Screw 6 4 #8 x 1" Tek Screw 7 4 3/8" x 4" Screw 8 2 3/8" x 1 1/2" Screw 9 6 3/8" x 2" Bolt 10 6 3/8" Nut 11 6 3/8" Star Washer 12 2 #10 Star Washer 13 8 5/16" Star Washer 14 5 #8 x 3/4" Tek Screw 15 3 #8 x 2" Screw 16 20 #8 x 1/2" Screw 17 11 #8 x 3/4" Truss Head Screw 18 2 #8 x 1 1/2" Screw 19 2 5/16" x 1 1/2" Bolt 20 2 5/16" x 3 5/8" Bolt 21 2 3/8" x 1" Screw 22 1 1/4" x 1" Screw 23 2 1/4" x 2 1/2" Screw 24 1 3/8" x 1 3/4" Bolt 25 1 3/8" x 1 1/2" Bolt 26 2 3/8" x 3/4" Bolt 27 8 #8 x 1/2" Washer Head Screw 28 8 #12 x 1 1/4" Screw 29 2 1/4" x 3/8" Screw 30 4 #8 Belt Guide Screw 31 2 5/16" Cage Nut 32 1 1/4" Star Washer 33 4 3/8" Jam Nut 34 4 5/16" Flange Nut 35 3 Hood Clip 36 1 Roller Ground Wire 37 4 #8 x 1" Screw 38 2 Foot Rail Decal 39 1 Left Foot Rail 40 1 Right Foot Rail 41 2 Platform Cushion 42 1 Caution Decal 43 1 Idler Roller 44 1 Walking Platform 45 2 Belt Guide 46 2 Frame Cap 47 2 Frame Spacer 48 1 Magnet 49 1 Drive Roller/Pulley 50 1 Walking Belt 51 1 Latch Bracket 52 1 Storage Latch 53 1 Frame 54 2 Idler Roller Bracket 55 1 Right Handrail Cover 56 1 Right Rear Foot 57 1 Left Rear Foot 58 1 Hex Key 59 1 5/32" Hex Key 60 1 Hood Accent 61 1 Motor Hood 62 1 Incline Frame 63 1 Motor Belt 64 1 Drive Motor 65 1 Ground Wire 66 1 Controller Ground Wire 67 1 Power Cord 68 1 Grommet 69 1 Power Switch 70 1 Controller 71 1 Reed Switch 72 1 Reed Switch Clamp 73 1 Belly Pan 74 2 Wire Tie 75 1 15" Tie 76 4 Releasable Tie 77 8 8" Tie 78 1 Left Upright Cover 79 1 Right Upright Cover 80 1 Left Upright 81 1 Right Upright 82 2 Handrail Cap 83 1 Left Handrail Cover 84 1 Left Handrail 85 1 Right Handrail 86 1 Left Base Cover 87 1 Right Base Cover 88 1 Upright Wire 89 4 Base Foot 90 2 Caution Decal 91 1 Base 92 2 Base Foot Spacer 93 2 Wheel 94 1 Incline Motor 95 1 Incline Motor Spacer 96 0 Not Used 97 1 Key Clip 98 1 Cable Tie 99 1 Console Back 100 1 Console PART LIST Model No. RBTL59211.0 R0113A

Description Key No. Qty. Description 101 1 Left Tray 102 1 Right Tray 103 1 Console Frame 104 2 Ground Wire 105 2 Console Clamp 106 1 Console Back 107 1 Crossbar 108 4 5/16" Flat Washer 109 2 #10 x 3/4" Flat Head Screw 110 2 Base Cap * –– User’’s Manual Note: Speci cations are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.

Model No. RBTL59211.0 R0113A

Model No. RBTL59211.0 R0113A

Model No. RBTL59211.0 R0113A

Model No. RBTL59211.0 R0113A

Printed in USA © 2013 ICON IP, Inc. ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame is warranted for a lifetime. The drive motor is warranted for twenty- ve (25) years from the date of purchase. Parts and labor are warranted for one (1) year from the date of purchase. This warranty extends only to the original purchaser (customer). ICON’’s obligation under this warranty is limited to repairing or replacing, at ICON’’s option, the product through one of its authorized service centers. All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to a service center, freight charges to and from the service center will be the customer’’s responsibility. If replacement parts are shipped while the product is under warranty, the customer will be responsible for a minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend to freight damage to the product. This warranty will automatically be voided if the product is used as a store display model, if the product is purchased or transported outside the USA, if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used, or if the product is used for commercial or rental purposes. No other warranty beyond that speci cally set forth above is authorized by ICON. ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in con- nection with the use or performance of the product; damages with respect to any economic loss, loss of property, loss of revenues or pro ts, loss of enjoyment or use, or costs of removal or installation; or other consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to the customer. The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of merchantability or  tness for a particular purpose are limited in their scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to the customer. This warranty provides speci c legal rights; the customer may have other rights that vary from state to state. ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813 LIMITED WARRANTY IMPORTANT: To protect your fitness equipment with an extended service plan, see page 5. To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) •• the name of the product (see the front cover of this manual) •• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) ORDERING REPLACEMENT PARTS