Sharp LC-19DV200E Operation Manual

• the actual operations. ENGLISH Contents ................................................................ 1 Introduction ........................................................... 2 Dear SHARP customer ................................... 2 Important Safety Precautions .......................... 2 Important Warning .......................................... 3 Trademarks ..................................................... 3 Remote control unit ........................................ 4 TV (Front view) ................................................ 5 TV (Rear view) ................................................. 5 Preparation............................................................ 7 Supplied accessories ...................................... 7 Mount the TV stand ........................................ 7 Wall mounting ................................................. 8 Installation of batteries .................................... 8 Using the remote control ................................ 8 Display the Menu Screen .......................... 8 Select an item by the remote control ......... 8 Exit the Menu Screen ................................ 8 Quick guide ........................................................... 9 Initial installation overview................................ 9 Watching TV ........................................................ 10 Daily operation .............................................. 10 Turning on/off the power ......................... 10 Changing channels ................................. 10 Selecting external video source ............... 10 Operation without a remote control ......... 10 EPG (Electronic Programme Guide) .............. 11 Teletext ......................................................... 12 Select a Teletext language ....................... 12 Using the MHEG5 application (UK only) .. 12 TV menu .............................................................. 13 Picture .......................................................... 13 Adjust picture settings ............................. 13 Use smart picture .................................... 13 HDMI overscan ....................................... 13 Audio ............................................................ 14 Adjust Audio settings .............................. 14 TV ................................................................. 14 Select a digital audio language ................ 14 Automatically install channels .................. 14 Update Scan ........................................... 15 Single RF Scan ....................................... 15 Channel Skip .......................................... 15 Channel Sort ........................................... 16 Channel Edit ........................................... 16 Analogue Ch Fine Tune ........................... 17 Features ....................................................... 17 Change picture format ............................ 17 Power Management ................................ 18 Change the time zone ............................. 18 Set the clock .......................................... 18 Automatically switch the TV on or off (On / Off time) ............................................... 18 Automatically switch the TV to standby (Sleep timer) ......................................... 18 No Operation Power Off ......................... 18 AV Input (Only shown in AV mode) ......... 19 Use subtitles ............................................. 19 Auto 4 : 3 Mode ........................................ 19 Reset Default ............................................ 19 Parental .......................................................... 20 Access Parental menu .............................. 20 Lock one or more channels ....................... 20 To set parental ratings ............................... 20 Set / Change password ............................ 20 DVD Operation ...................................................... 21 Disc ................................................................ 21 Playing Audio files ..................................... 22 Playing a disc .................................................. 23 Zooming (DVD/VCD) ....................................... 24 Locating desired scene (DVD/VCD/Audio CD) . 24 Changing Soundtrack Language (DVD/VCD)... 24 Subtitles (DVD) ................................................ 24 Changing angles (DVD) ................................... 25 Title selection (DVD) ........................................ 25 DVD menu (DVD) ............................................ 25 Disc status ...................................................... 25 Using HOME MENU ........................................ 25 Play mode ...................................................... 26 A-B repeat playback ................................. 26 Repeat playback ....................................... 26 Random playback ..................................... 26 Program playback ..................................... 26 Locating desired scene ............................. 27 Audio Settings menu ....................................... 27 Video Adjust menu .......................................... 28 Customizing The Function Settings ................. 28 Parental Control .............................................. 30 Language Code List ........................................ 31 Country/Area Code List .................................. 31 Connecting external devices ............................... 32 HDMI connection ............................................ 32 YPbPr (Component connection) ...................... 32 SCART connection ......................................... 33 S-Video connection ........................................ 33 Speaker / Amplifier connection ....................... 34 Inserting a CA Card ........................................ 34 Access CI Module service ......................... 34 Connecting a PC ............................................ 35 Digital connection ..................................... 35 Analogue connection ................................ 35 Supported display resolutions ................... 35 Appendix ............................................................... 36 Troubleshooting .............................................. 36 Troubleshooting-PC mode .............................. 36 Troubleshooting-DVD ...................................... 37 Specification ................................................... 38 ENGLISH 1 54B0101A_English.indd 1 54B0101A_English.indd 1 2/27/2010 17:23:06 2/27/2010 17:23:06

• product. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to • clean it. Chemicals may cause damage or cracks in the cabinet of the TV. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, • swimming pool and in a wet basement. Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing • fire or electric shock. Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause • the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, • excessive force and uneven floor surface can cause the product to fall from the cart. Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover • or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. The LCD panel used in this product is made of glass. Therefore, it can break when the product is • dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass. Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and • other heatgenerating products (including amplifiers). To prevent fire, never place any type of candle or naked flames on the top or near the TV set. • To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. • Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high • volume levels. Do not display a still picture for a long time, as this could cause an afterimage to remain. • There is power consumption always if main plug is connected. • Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and • other dangerous conditions. Request a qualified person to perform servicing. Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or • electric shock. Exercise special caution when using the product around children. Condensation — Moisture will form in the operating section of the player if the product is brought from cool • surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player’s performance will be impaired. To prevent this, let the product stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the product is exposed to the breeze from an air conditioner. In such cases, change the location of the product. Disc slot — Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal • injury. Laser beam — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of • the laser beam. Doing so may cause sight damage. Disc — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious • personal injury and product malfunction. The LCD panel is a very high technology product, giving you fine picture details. Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red. This is within product specifications and does not constitute a fault. Introduction Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Dear SHARP customer Important safety precautions WARNING To prevent the spread of fire, keep candles or other open flames away from this product at all times. 2 54B0101A_English.indd 2 54B0101A_English.indd 2 3/2/2010 11:01:11 3/2/2010 11:01:11

COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE UNIT. WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Precautions when transporting the TV When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two hands—one hand on each side of the TV. Wall mounting Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Trademarks “HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of • HDMI Licensing LLC.” The “HD TV” Logo is a trademark of DIGITALEUROPE. • DVB is a registered trademark of the DVB Project. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby • Laboratories. Manufactured under license under U.S.Patent#: 5,451,942 & other U.S. and worldwide patents issued & • pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. DivX • ® is a registered trademark of DivX, Inc., and is used under license. This product incorporates copy protection technology that is protected by U.S. and other intellectual property • rights. The use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited. • is a trademark of DVD Format/Logo Licensing Corporation. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such • technology outside of this product is prohibited without a license from Microsoft. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL • AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW. MPEGLA.COM 3 54B0101A_English.indd 3 54B0101A_English.indd 3 3/2/2010 11:01:11 3/2/2010 11:01:11

enter standby mode. Ø (INPUT SOURCE) Select an input source. TV/DVD Select to operate TV/DVD. DTV/ATV Switches between the analogue TV and the digital TV. EPG Press this button to display electronic programme guide when watching digital channels. ∏ (Picture format) Select picture format to Auto / 4:3 / 16:9/ 14:9 / Cinema / Real ¬ (MUTE) Press to toggle audio on and off. 0-9 DIGIT BUTTONS To select a TV channel directly. ” (+/-) Press to adjust the volume. P () Press to select the channel. Ë Display programme information, if available. (PRE PR) To display the previous selected TV channel. SKIP ┙/├ Skip chapter/track to forward or reverse direction. REV/FWD ┕/┗ Fast Forward/Review playback. PAUSE ƒ Pause picture of DVD. PLAY ° Playback. STOP ■ Stop. Remote control unit SETUP/TV MENU TV MENU : for TV operation - Display menu of TV SETUP : for DVD operation - Call up initial setup mode. ×÷±° Press ×÷±° to navigate and confirm your selection. SLOW / Forward/Reverse- slow motion. OK Memorize. Display channel list. DVD MENU Display DVD menu. RETURN Remove setup menu. TOP MENU Select title. CANCEL Reset information in the menu. (SUBTITLE) Press this button to toggle off / between available subtitle languages. AUDIO / (SIZE) Change sound track language. Teletext enlargement. PLAY MODE Select playback mode. (TELETEXT) Press this button to activate Teletext. (See page 12.) ANGLE / (REVEAL) Change playback angle/Reveal hidden information such as answers to a quiz. ZOOM / (SUBPAGE) Zoom/To select the subpage when the current page contains subpage(s). (HOLD) / FREEZE Press this button to stop the scrolling of pages. The text decoder stops receiving data. / Press to freeze a moving image on the screen. (Only available when your input source is TV). 4 54B0101A_English.indd 4 54B0101A_English.indd 4 2/27/2010 17:23:06 2/27/2010 17:23:06

B (Standby/On) indicator Remote control sensor TV (Rear view) 19” 22” AC INPUT EJECT button Volume +/Menu button Volume –/Menu button Channel /Menu /PLAY button Channel /Menu /STOP button MENU button INPUT SOURCE / OK button POWER button HEADPHONE AV1 (SCART) INPUT ANT. INPUT SERVICE socket PC/DVI AUDIO INPUT HDMI / DVI INPUT PC - INPUT AV2 VIDEO and AUDIO L/R INPUT AV2 S-VIDEO INPUT DIGITAL AUDIO COAXIAL OUTPUT COMPONENT VIDEO and AUDIO L/R INPUT COMMON INTERFACE slot 5 54B0101A_English.indd 5 54B0101A_English.indd 5 2/27/2010 17:23:07 2/27/2010 17:23:07

HEADPHONE INPUT COMMON INTERFACE PC/DVI AUDIO INPUT HDMI 1 (HDMI/DVI) HDMI 2 (HDMI) PC-INPUT AV 1 (SCART) INPUT AV 2 (SCART) INPUT COMPONENT VIDEO and L/R AUDIO INPUT DIGITAL AUDIO COAXIAL OUTPUT AV 3 (VIDEO and L/R AUDIO INPUT) ANT. INPUT AC INPUT AC INPUT HEADPHONE INPUT COMMON INTERFACE SERVICE socket PC/DVI AUDIO INPUT HDMI 2 (HDMI) HDMI 1 (HDMI/DVI) PC-INPUT AV 1 (SCART) INPUT AV 2 (SCART) INPUT COMPONENT (VIDEO and L/R AUDIO INPUT) DIGITAL AUDIO COAXIAL OUTPUT AV 3 (VIDEO and L/R AUDIO INPUT) ANT. INPUT Introduction 26” 32” EJECT button Volume +/Menu button Volume –/Menu button Channel /Menu /PLAY button Channel /Menu /STOP button MENU button INPUT SOURCE / OK button POWER button EJECT button Volume +/Menu button Volume –/Menu button Channel /Menu /PLAY button Channel /Menu /STOP button MENU button INPUT SOURCE / OK button POWER button SERVICE socket 6 54B0101A_English.indd 6 54B0101A_English.indd 6 2/27/2010 17:23:08 2/27/2010 17:23:08

Operation Manual Quick Setup Guide AC cord (x1) Product shape varies in some countries Remote control (×1) AA battery (×2) Stand unit and screws 26” 32” 19” 22” Mount the TV stand Before performing work spread cushioning over the base area to lay the TV on, making sure the area is completely flat. This will prevent it from being damaged. Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal. Confirm the 3 screws supplied with the TV. 1. Screws (X3) Remove the covering sheet before use. 2. 1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 3 screws into the 3 holes on the bottom of the stand. Soft cushion Screw 19” 22” Confirm the 8 screws supplied with the TV. 1. Short screws (X4) (used in step 2) Long screws (X4) (used in step 3) Remove the covering sheet before use. 2. Attach the base to the post. 2 Attach the base to the 4 screws into the 4 holes on the bottom of the base. Hex key Screw 3. Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV. Hex key Screw Soft cushion NOTE For protection, sheets are covering the product. Please • remove these sheets before use. To detach the TV stand, perform the steps in reverse • order. 19” 22” 26” 32” 7 54B0101A_English.indd 7 54B0101A_English.indd 7 2/27/2010 17:23:15 2/27/2010 17:23:15

Screw type 19”, 22” 100 x 100 mm Metric 4 x 10 mm 26” 200 x 100 mm Metric 4 x 10 mm 32” 200 x 200 mm Metric 6 x 10 mm NOTE At the time of purchasing wall bracket, please check if • there is enough space between the wall bracket and TV terminals for the terminal connection. Installation of batteries Insert two AA batteries into Remote control. 1. Make sure (k) and (l) are facing the proper direction. Replace the cover. 2. NOTE If the remote control will not to be used for a long • time, remove the batteries to avoid remote control damage. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. Do not mix batteries of different types. Different • types of batteries have different characteristics. Do not mix old and new batteries. Mixing old and • new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. Remove batteries as soon as they have worn out. • Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. The batteries supplied with this product may have a • shorter life expectancy due to storage conditions. If you will not be using the remote control unit for • an extended period of time, remove the batteries from it. Note on disposing batteries: The batteries provided contain no harmful materials such as cadmium, lead or mercury. Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses. Using the remote control Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation. 30° 30° Remote control sensor 5m Display the Menu Screen Press TV MENU and the menu screen displays. Select an item by the remote control Press 1. / / to select the desired menu. Press 2. / to select / adjust the item to the desired level. The setting on screen is applied immediately. Press 3. RETURN to return to the previous layer. Picture Option Lock 3 Picture Preference Brightness Contrast Colour Tint Sharpness Colour Temperature Advanced Settings DBC Reset Standard On 50 85 50 0 0 Exit the Menu Screen The operation will exit the menu screen if you press TV MENU before it is complete. 8 54B0101A_English.indd 8 54B0101A_English.indd 8 2/27/2010 17:23:21 2/27/2010 17:23:21

Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Preparation n Connect antenna cable to the antenna terminal. 75Ω o If necessary, insert CA card into the CI slot to watch scrambled broadcasts. p Connect the AC cord to the TV. 1 Power on and run the auto installation n Turn on the TV power with a. o Run the initial auto installation. ✔ Language setting Auto Installation Language English Deutsch Français Italiano Nederlands Español Ελληνιкά Please select your language then press “OK” on your remote control: ✔ Country setting Country UK Germany France Spain Italy Poland Belgium Auto Installation Please select your country then press “OK” on your remote control: ✔ TV Location setting TV Location Home Store Auto Installation Please select where the TV will be placed. The picture will be optimized for that location. 2 ✔ Start searching channels Channel Scan Scan Auto Installation TV will search for Digital CH, please connect aerial(RF) lead. Then press "OK". If you skip this step, it can be performed via MENU. 0% Channel Scan Scan Auto Installation TV will search for Analogue CH, please connect aerial(RF) lead. Then press "OK". If you skip this step, it can be performed via MENU. 100% Channel Scan Auto Installation Please wait, channel search in progress Status : Scanning... Analog Channels Found : 9 10% Watch TV n Congratulations! Now you can watch TV. Complete Auto Installation Congratulations !! Completed Initial Setup. Please press [OK] to exit. o If necessary, adjust the antenna to attain maximum signal reception. 3 AC cord (x1) Product shape varies in some countries. 9 54B0101A_English.indd 9 54B0101A_English.indd 9 2/27/2010 17:23:22 2/27/2010 17:23:22

Press B on the TV. Switch it off by pressing B on the TV. Changing channels With P<>: Standby mode E To standby mode If the TV set is switched on, you can switch it to standby by pressing B on the remote control. E Switching on from standby From standby, press B on the remote control. TV indicator status B indicator Status Off Power off Green Power on Red Standby NOTE If you are not going to use this TV for a long period of • time, be sure to remove the AC cord from the power outlet. A small amount of electric power is still consumed even • when B is turned off. Selecting external video source Once the connection is made, press b to display the Input Select screen, and then press / to switch over to the appropriate external source with OK. Input Select TV AV1 AV2 (CVBS) AV2 (S-Video) Component HDMI DVD PC 19” / 22” Input Select TV AV1 AV2 AV3 Component HDMI1 HDMI2 DVD PC 26” / 32” Operation without a remote control This function is useful when there is no remote control within your reach. Press 1. MENU briefly to display the direct control screen. Press 2. P <> instead of / or i k/l instead of / to select the item. Press 3. b to confirm the selection. NOTE The direct control menu screen will disappear if left • unattended for several seconds. 10 54B0101A_English.indd 10 54B0101A_English.indd 10 2/27/2010 17:23:22 2/27/2010 17:23:22

EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes. There are two types of EPG, “Now and Next” and “7 or 8 day” EPG. “Now and Next” is always available but the “7 or 8 day” EPG is only available in certain countries. With the EPG menu you can: View a list of currently broadcast digital programmes. • View upcoming programmes. • Switch on EPG NOTE The first time you use EPG, you may be prompted • to perform an update. If so, follow the on-screen instructions. Press 1. EPG on the remote control, the “Now and Next” EPG will appear and the detailed information about the current programme is displayed. Use the 2. colour buttons on the remote control to activate available actions. Date: Sun, 20 Aug Television l TV guide Prev page 1:00 ~ 1:01 No category 1:00 1:01 1:02 1:03 1:04 1:05 2:10 3:00 670 671 672 674 679 800 801 802 STU MNO VWXYZ TCM PQR ARTE DEF SAT.1 Next page Time: Sun, 20 Aug 01:00:52 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... 679_VWXYZ_Monosco_0820_... Service list Events list Service list • Prev page (Red): * List the previous service list. Next page (Green): * List the next service list. Events list • Prev day (Red): * List the previous day’s EPG. Next day (Green): * List the next day’s EPG. Info (Yellow): * Displays the information of your highlighted programme. Press 3. EPG or RETURN to exit . 11 54B0101A_English.indd 11 54B0101A_English.indd 11 2/27/2010 17:23:23 2/27/2010 17:23:23

Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning on and off Teletext Select a TV channel or external source 1. providing a Teletext programme. Press 2. to display Teletext. Many stations use the TOP operating system, • while some use FLOF (e.g. CNN). Your TV supports both these systems. The pages are divided into topic groups and topics. After switching on the teletext, up to 1000 pages are stored for fast access. If you select a programme with no Teletext • signal, “No Teletext ” displays. The same message displays during other • modes if no Teletext signal is available. Press 3. again to display the Teletext and normal image at the same time on the screen. NOTE Teletext will not work if the selected signal type is RGB. • Buttons for teletext operations Buttons Description P (rs) Increase or decrease the page number. Colour (R/G/Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (R/G/Y/B) on the remote control unit. 0 - 9 Directly select any page from 100 to 899 by using 0 - 9. (TEXT) Press this button to activate Teletext with TV. (SIZE) Switch the Teletext image to Top, Bottom or Full. (HOLD) Stop updating Teletext pages automatically or release the hold mode. (REVEAL) Reveal or hide hidden information such as an answer to a quiz. Buttons Description (SUBPAGE) Select the subpage when the current page contains subpage(s). Press number buttons on the remote control to access the subpage directly. (four digits) Select a Teletext language Press 1. TV MENU on the remote control and select ≥ Teletext. Press 2. OK or to enter Teletext menu and press / to select one of the following. Digital Teletext Language. • Analog Teletext Language. • Highlight your selection and press 3. / to make a selection. Follow the on-screen instructions to exit. 4. Using the MHEG5 application (UK only) Some services bring you programmes with the MHEG (Multimedia and Hypermedia Expert Group) application encoded, letting you experience DTV interactively. When provided, the MHEG5 application will start when you press (TELETEXT) or the Red button. Sample MHEG5 screen 12 54B0101A_English.indd 12 54B0101A_English.indd 12 2/27/2010 17:23:24 2/27/2010 17:23:24

the image. Phase: * Eliminates the horizontal (PHASE) interfering lines. Clock: * Eliminates the vertical (CLOCK) interfering lines. Reset: • Select “Reset” to reset Picture Preference, Brightness, Contrast, Colour, Tint, Sharpness, Colour Temperature and Back Light to the factory preset values. Press 4. / to select / adjust the item to the desired level. Follow the on-screen instructions to exit. 5. NOTE When the DBC function is ON, the backlight cannot be • adjusted. Use smart picture Apart from manually adjusting picture settings, you can use Picture Preference to set your TV to a predefined picture setting. Press 1. TV MENU on the remote control and select . Press 2. OK or to enter and select Picture Preference. Press 3. / to select one of the following settings: • Sport • Standard Movie • Memory • Follow the on-screen instructions to exit. 4. HDMI overscan When you watch TV via HDMI input source, you could use this function to enlarge the picture. It may have few loss of video content. Press 1. TV MENU on the remote control and select ≥ Advanced Settings ≥ HDMI Mode. Press 2. / to select Auto, PC or Video. Follow the on-screen instructions to exit. 3. Picture Adjust picture settings Press 1. TV MENU on the remote control and select . Press 2. OK or to enter the list. Picture Option Lock Picture Preference Brightness Contrast Colour Tint Sharpness Colour Temperature Advanced Settings DBC Reset Standard On 50 85 50 0 0 Press 3. / to select one of the following settings: • Picture Preference: See right colum. Brightness: • Changes the level of light in the picture. Contrast: • Changes the level of bright parts in the picture keeping the dark parts unchanged. • Colour: Changes the level of saturation. Tint: • Changes the colours to reddish or bluish. Sharpness: • Changes the level of sharpness of fine details. Colour Temperature: • Press OK or to enter and press / to select one of the following item: Sets the colour temperature to Cool (bluer), Medium (balanced), Warm (redder), Memory (R Gain / G Gain / B Gain). Advanced Settings: • Press OK or to enter and press / to select one of the following item: DNR: * Filters and reduces the noise in the picture. Selects the level to Low / Medium / High. Or select Off to disable this function. Blue Back: * Auto blue screen and mute the sound if the signal is weak or absent. Back Light: * Adjusts the background brighter or darker. HDMI Mode: * See right colum. DBC: • Change the Black level automatically acording to the brightness an image. PC: • Press OK or to enter and press / to select one of the following item: Auto Adjust: * Hor Position, Ver Position, Phase and Clock are adjusted automatically as per the input PC video signal. When PC-input mode was selected and a PC-signal was input, Auto Adjust will be performed automatically. Hor Position: * To adjust the horizontal placing of the image. TV menu 13 54B0101A_English.indd 13 54B0101A_English.indd 13 2/27/2010 17:23:25 2/27/2010 17:23:25

This section describes how to adjust sound settings. Press 1. TV MENU on the remote control and select . Press 2. OK or to enter the list. Picture Option Lock Balance Bass Treble Surround Equalizer Speaker Audio Description Setting Reset Off Off On 0 50 50 Press 3. / to select one of the following settings: Balance: • Sets the balance of the left and right speakers to best fit your listening position. Bass: • Adjusts the amount of bass. Treble: • Adjusts the amount of treble. Surround: • Automatically switches the TV to the best surround sound mode available from a broadcast. Select On or Off. Equalizer: • Change the characteristic of audio frequency. Select the Off, Rock, Pop, Live, Dance, Techno, Classic or Soft. Speaker ( • 26” 32” ): You can set the audio output from speaker to “On” or “Off”. Audio Description Setting: • You can set the output audio of Visual Impaired Audio. This option is available, when the Audio Description setting is “On” only. Press OK or to enter the following options. Audio Description: * You can set the Visual Impaired Audio. Visual Impaired Audio is verbal narration inserted to explain detailed scene in parallel with normal audio for people with visual impairment. Volume: * You can adjust the audio volume of Visual Impaired audio. Reset: • Select “Reset” to reset Balance, Bass, Treble to the factory preset values. Press 4. / to select / adjust the item to the desired level. Follow the on-screen instructions to exit. 5. TV menu TV The first time you set up your TV, you are prompted to select an appropriate menu language and to perform automatic installation of TV and digital radio channels (If available). This chapter provides instructions on how to reinstall channels as well as other useful channel installation features. NOTE Re-installing channels modifies the channel list. • Select a digital audio language Press 1. TV MENU on the remote control and select . Press 2. OK or to enter TV menu. Press 3. / to select Audio Language or Audio Language 2nd. Highlight your selection and press 4. / to select an audio language. Follow the on-screen instructions to exit. 5. NOTE If your selected audio language is not broadcasted, the • default audio language will be displayed. Automatically install channels This section describes how to search and store channels automatically. Instructions are for both digital and analogue channels. E Step 1: Select your menu language Press 1. TV MENU on your remote control and select ≥ OSD Language. Press 2. / to select your language. Follow the on-screen instructions to exit. 3. 14 54B0101A_English.indd 14 54B0101A_English.indd 14 3/2/2010 18:51:46 3/2/2010 18:51:46

Select the country where you are located. The TV installs and arranges channels according to your country. Press 1. TV MENU on the remote control and select ≥ Country. Press 2. / or to select your country. Follow the on-screen instructions to exit. 3. E Step 3: Automatic installation Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Select 2. Auto Scan ≥ Start and press OK or to start channel installation. The installation may take a few minutes. When complete, follow the on-screen 3. instructions to exit. Update Scan Update Scan has similar function with Auto Scan. The difference is you could update channel list without erasing the original information. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Press 2. / to select Update Scan ≥ Start and press OK or to start channel update. When complete, follow the on-screen 3. instructions to exit. Single RF Scan If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Press 2. / to select Signal Status and press OK or to enter. Picture Option Lock Signal Strength Signal Quality Good 100 When the scan is completed, the result of 3. Signal Strength and Signal Quality appear on the screen. Follow the on-screen instructions to exit. 4. NOTE If the signal quality and strength is poor, reposition • the antenna or satellite dish and retest. If you have further problems with the reception of • your digital broadcast, contact a specialised installer. Channel Skip Channel skip allows you to skip one or more channels when pressing P <> on the remote control to switch between channels. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Press 2. / to select Channel Skip and press OK or to enter the channel list. Press 3. / to select one or more channels you preferred to skip. Press 4. OK to mark or cancel. Follow the on-screen instructions to exit. 5. NOTE To watch the skipped channels, enter the channel • numbers by using the digit buttons on the remote control or select from channel list. If you perform Auto Scan, your stored settings will be • erased and you will have to perform this operation again. 15 54B0101A_English.indd 15 54B0101A_English.indd 15 2/27/2010 17:23:26 2/27/2010 17:23:26

channel list. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Press 2. / to select Channel Sort and press OK or to enter the channel list. Press 3. / to select one channel and press OK to mark. Press 4. / to select another channel and press OK to mark. The two channels your marked are exchanged. Repeat step 3 to 4 to reorder more channels. 5. Follow the on-screen instructions to exit. 6. NOTE If you perform Auto Scan, your stored settings will be • erased and you will have to perform this operation again. Channel Edit Channel edit allows you to change the channel number or the channel name. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Press 2. / to select Channel Edit and press OK or to enter the channel list. Press 3. / to select one channel you prefer to edit. Press 4. OK to enter. Picture Option Lock Network Name: Channel Number: Channel Name : Frequency Colour system Sound system CESKE RADIOKOMU... 805 NOVA 498 Auto B/G Press 5. / to highlight one of the following: Channel Number: • Enter a new channel number by using the digit buttons on the remote control. Channel Name: • Press the digit buttons on the remote control to rename the channel. Please refer to the graphic below for available characters. (Press each button repeatedly to change between characters.) 0-9 digit buttons with available characters ( button works as "Back space".) Remote key Action 0 +, –, ., 0 1 ABC1 2 DEF2 3 GHI3 4 JKL4 5 MNO5 6 PQR6 7 STU7 8 VWX8 9 YZ9 Back space Frequency: • Enter the frequency value by using the digit buttons on the remote control. (Only for analogue channels) Colour system: • Press / to select the colour system. (Only for analogue channels) Sound system: • Press / to select the sound system. (Only for analogue channels) Follow the on-screen instructions to exit. 6. NOTE The new channel number you have entered can not • override the exist one. If you perform Auto Scan, your stored settings will be • erased and you will have to perform this operation again. 16 54B0101A_English.indd 16 54B0101A_English.indd 16 2/27/2010 17:23:27 2/27/2010 17:23:27

WSS: Public broadcasters include 16:9 identification, the WSS signal (WideScreenSignalling), during transmission in order to ensure automatic conversion to 16:9. Other formats Press ∏ until the desired size is reached. 4:3 The picture is displayed in 4:3 format with black bars to the right and left. 16:9 The width of the picture will be zoomed evenly. 14:9 The picture is increased somewhat but not up to the full screen width. Black bars remain on the right and left and also at the top and bottom. Cinema Use Cinema to increase a small 4:3 letterbox signal. If the picture is surrounded by a black border as in the illustration, this is a 4:3 letterbox signal. Cinema increases this picture that is too small as far as possible. Real (HDMI / PC mode) The picture is displayed with original size. NOTE In PC mode, the picture size feature is available only for • 16:9-, 4:3- or Real format. For PC input signal over WXGA, Real format is not • availabe and adjusted to 16:9 format. External receivers can automatically adjust the picture • size via a SCART cable. Please read the instructions for the external receiver. Analogue Ch Fine Tune You can manually fine tune analogue channels when reception is poor. Press 1. TV MENU on the remote control and select ≥ Channel Set Up. Then press OK or . NOTE You are prompted to enter current password to enter • Channel Set Up if Channel Block in the Parental menu is not the default setting. Press 2. / to select Fine and press OK or to enter the analogue channel list. Press 3. / to select one channel and press OK to enter. Press 4. / to adjust the frequency. When complete, press 5. OK to set the frequency. The fine tuned channel is stored under the current channel number. Follow the on-screen instructions to exit. 6. NOTE This option is unavailable if no analogue channels were • found. Features Change picture format Change the picture format to suit your content. Press 1. ∏ repeatedly to select one of the following picture formats. Auto The picture is automatically only then shown in a format-filling display when a WSS-TV signal is received. Example: If the analogue tuner receives a letterbox image with WSS signal then the resulting image looks like this: 17 54B0101A_English.indd 17 54B0101A_English.indd 17 2/27/2010 17:23:28 2/27/2010 17:23:28

On / Off time switches the TV to power on or standby at a specified time. NOTE Before using off time function, you have to set the time • on your TV correctly. Press 1. TV MENU on your remote control and select ≥ Time Setup. Press 2. OK or to enter Time Setup. Press 3. / to select Time and press OK or to enter. Press 4. to select Timer and press / to select: Both On / Power On Timer / Power Off • Timer: Press to highlight the Power On Timer or Power Off Timer box and set power on or off time by using the digit buttons on your remote control. Off: • Disable Timer. Follow the on-screen instructions to exit. 5. Automatically switch the TV to standby (Sleep timer) Sleep timer switches the TV to standby after a defined period of time. Press 1. TV MENU on your remote control and select ≥ Time Setup. Press 2. OK or to enter Time Setup. Press 3. / to select Sleep Timer. Press 4. / to select the period of time before TV enters to standby. Follow the on-screen instructions to exit. 5. No Operation Power Off When the Set and Remote key operation are not operated with specified period by this setting (1/2/4 Hours), the power status is changed to stand by mode automatically. Press 1. TV MENU on your remote control and select ≥ Time Setup. Press 2. OK or to enter Time Setup. Press 3. / to select No Operation Power Off. Press 4. / to select the period of time before TV enters to standby. Follow the on-screen instructions to exit. 5. TV menu Power Management Press 1. TV MENU on the remote control and Select ≥ Power Management. Press 2. / to select: On: If a period of time is elapsed with no video signal in PC mode, the power status is changed to stand by mode automatically. When there is available video signal again, the power status is returned to power on mode automatically. Off: Disable Power Management. Change the time zone Press 1. TV MENU on your remote control and select ≥ Time Setup. Press 2. OK or to enter Time Setup. Select 3. Time Zone and press / to select your time zone. Follow the on-screen instructions to exit. 4. Set the clock Press 1. TV MENU on your remote control and select ≥ Time Setup. Press 2. OK or to enter Time Setup. Press 3. / to select Time and press OK or to enter. Auto Synchronization Date Time On 2009/10/21 01:01:39 Timer Power On Timer Power Off Timer Off 00:00:00 00:00:00 Select 4. Auto Synchronization and press / to select: On: • Sets the clock automatically the same with the digital signal time. (Only if digital signal is available). Off: • Press / to set your system Date or system Time manually by using the digit buttons on your remote control. When the clock setting is completed, follow the 5. on-screen instructions to exit. 18 54B0101A_English.indd 18 54B0101A_English.indd 18 2/27/2010 17:23:28 2/27/2010 17:23:28

It is possible to manually adjust various settings for connections with external devices. Select the appropriate signal type for the signals from the video equipment connected the AV1 or AV2 ( 26” 32” ). Press 1. TV MENU on your remote control and select . Press 2. / to select AV1 Input or AV2 Input. Press 3. / to select the desired signal type. Auto: Factory setting, normally OK. RGB (only for AV1 input): When RGB is input. CVBS: When Composite is input. S-Video: When S-Video is input. Use subtitles You can enable subtitles for each TV channel. Subtitles are broadcasted via teletext or DVB-T digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language. E Set analogue subtitles Press 1. TV MENU on the remote control and select ≥ Subtitle. Press 2. OK or to enter Subtitle. Select 3. Analog Subtitle. Press 4. / to select On to display subtitle always. Select Off to close subtitles. Follow the on-screen instructions to exit. 5. E Select a subtitle language on digital TV channels When you select a subtitle language on a digital TV channel as described below, the preferred subtitle language set in the TV menu is temporarily overruled. Press 1. TV MENU on the remote control and select ≥ Subtitle. Press 2. OK or to enter Subtitle. Press 3. / to select Digital Subtitle Language or Digital Subtitle Language 2nd. Highlight your selection and press 4. / to select a subtitle language. Follow the on-screen instructions to exit. 5. NOTE If your selected subtitle language is not broadcasted, the • default language subtitle will be displayed. If the • Digital Subtitle Language you selected is not available, the Digital Subtitle Language 2nd will be displayed. E Select Hearing impaired subtitle When watching channels with hearing impaired services, you can enable the subtitle commentary for hearing impaired. For digital channels only. Press 1. TV MENU on the remote control and select ≥ Subtitle. Press 2. OK or to enter Subtitle. Press 3. / to select Hearing Impaired. Press 4. / to select On or Off as your subtitle type. Follow the on-screen instructions to exit. 5. Auto 4 : 3 Mode This option selects the default way that a 4:3 signal is shown - either as normal “4:3” or expanded in the “16:9” mode, according to your preferences. Press 1. TV MENU on the remote control and select ≥ 4 : 3 Mode. Press 2. / to select 4 : 3 or 16 : 9. Follow the on-screen instructions to exit. 3. Reset Default When you activate the Reset Default, the TV enters to first time installation. Press 1. TV MENU on the remote control and select ≥ Reset TV Setting. Press 2. OK or to enter. Input password (0000: default password). 3. Follow the on-screen instructions to reset your 4. TV settings. 19 54B0101A_English.indd 19 54B0101A_English.indd 19 2/27/2010 17:23:29 2/27/2010 17:23:29

children from watching unauthorized content. Access Parental menu Press 1. TV MENU on the remote control and select . Press 2. OK or to highlight the password box. Picture Option Lock Password * * * * Enter your password by using the 3. digit buttons on the remote control. If your password is correct, the Parental menu appears. NOTE You have to enter a 4-digit password everytime to • access Parental menu. Enter “0000” as the default password. • If you forget your password, enter “3001” to override • any existing passwords. Lock one or more channels Enter your password to access the 1. Parental menu. (See “Access Parental menu” on this page) Select 2. Channel Block and press OK or to enter the channel list. Press 3. / to select one or more channels you preferred to lock. Press 4. OK to lock or unlock the channel you selected. Follow the on-screen instructions to exit. 5. NOTE If you switch to the locked channel, you will be • prompted to enter your password. (If your password is correct, the locked channel will be unlocked before the TV restarts from standby.) TV menu To set parental ratings Some digital broadcasters rate their programmes according to age. You can set TV to display only programmes with age ratings higher than your child’s. Enter your password to access the 1. Parental menu. (See “Access Parental menu” on this page) Press 2. / to select Program Block and press OK or to enter. Press 3. / to select an Age Rating. Follow the on-screen instructions to exit. 4. NOTE If you switch to the locked channel, you will be • prompted to enter your password. (If your password is correct, the locked input source will be unlocked before the TV restarts from standby.) Set / Change password Enter your password to access the 1. Parental menu. (See “Access Parental menu” on this page) Press 2. / to select Change Password and press OK or to enter. Enter your new password in the 3. New Password box by using the digit buttons on the remote control. Enter your new password again in the 4. Confirm Password box. When complete, the TV reruns to the 5. Parental menu. Follow the on-screen instructions to exit. 6. 20 54B0101A_English.indd 20 54B0101A_English.indd 20 2/27/2010 17:23:29 2/27/2010 17:23:29

The loaded Disc (DVD and Audio-CD) will be recognized automatically. The suitable disc formats are: DVD-Video, DVD-R/-RW (Video format only), Audio CD, Fujicolor CD, KODAK Picture CD, CD-R/CD-RW, Video CD, SVCD and DivX. Some CD-R/RW discs may be incompatible. This unit can play an 8cm disc. Please do not use a disc adapter. It may cause trouble. • Please do not insert any disc of an irregular shape into the unit, as it may interfere with the function of the unit. • You may not be able to remove it. If you tilt or move the unit while DVD or CD discs are placed inside, your discs may be damaged. • Please do not use after market accessories, such as a ring protector, as this may cause trouble with the operation of the • unit. When you play a movie that has been edited with a DVD recorder (partially deleted, etc), it may be paused for a moment • where edited. When you play a movie that has been edited with a DVD recorder or such, it may not be played exactly as you edited it. • Do not play DVD-ROM, DVD-Audio, CD-G or Photo CD to prevent accidental erasure of prerecorded material. Title When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a “TITLE”. Chapter The titles can be subdivided into many sections. Each section is called a “CHAPTER”. Track An Audio CD/VCD can contain several items. These are assigned to tracks. Removing Disc from Case Be sure to hold the edge of disc. Do not touch the surface of the disc. Pick up the disc gently from the case. Do not scratch the disc. • Do not get dirt on the surface of the disc. • Do not stick a label or adhesive tape on the disc. • Do not drop or bend the disc. • Storing Disc Store the disc in the case to avoid risk of scratches, dirt or damage. • Do not leave disc exposed to direct sunlight or in hot or humid places. • Cleaning Disc Wipe the disc with a clean, dry cloth from center to edge. Do not wipe in circular direction. • Do not use liquid or aerosol cleaners. • On Video CDs This unit supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) You can enjoy two playback variations depending on types of discs. Video CD not equipped with PBC function • (Version 1.1) Sound and movie can be played on this TV/DVD in the same way as an audio CD. Video CD equipped with PBC function • (Version 2.0) In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this owner’s manual may not work with some discs. To turn off the PBC Press one of the track numbers by Number buttons (0-9) in the Stop mode. Press OK. To turn on the PBC Once remove the disc with EJECT and insert it again. CHAPTER 1 TITLE1 TITLE2 DVD DISC CHAPTER 2 CHAPTER 2 CHAPTER 3 CHAPTER 1 TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 Audio-CD/VCD 21 54B0101A_English.indd 21 54B0101A_English.indd 21 2/27/2010 17:23:30 2/27/2010 17:23:30

You may not be able to play discs recorded using a • personal computer or recorder for disc compatibilities, scratches or marks on the disc, dirty lenses of the unit or condensation and so on. Discs recorded using a personal computer may not be • playable in this unit due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information. Playable files ISO 9660 Level 1 or 2 compliant. • Romeo and Joliet file systems are both compatible with this player. DRM (Digital Rights Management) protected files will not • play in this player. For detailed information, please see the instruction manuals or help files that came with your PC and/or software. File structure (may differ): Up to 299 folders on a disc; • up to 648 files within each folder. Folder and file names can be displayed as long as they • are typed in alphabets and numbers. If folder and file names are other than alphabets and numbers, they may be replaced and displayed as “_”. Garbled characters may also be displayed in this case. Playing image files JPEG files recorded in DVD-R/-RW and CD-R/-RW can be played. JPEG file compatibility Image files should be saved in JPEG format. • Files recorded in Fuji Colour CD, Kodak Picture CD or • CD-R/-RW can be played. Compatible formats: Baseline JPEG and EXIF 2.2* still • image files up to a resolution of 3072 x 2048. *File format used by digital still cameras. Files with extensions .jpg or .JPG can be played. • Progressive JPEG formatted files do not work. • It may take some more time to start to play larger files • than usual. JPEG files with different aspect ratio may be displayed • with black bands (either vertical or horizontal). Playing Audio files WMA and MP3 files recoded in DVD-R/-RW, CD-R/- RW can be played. Windows Media Audio (WMA) compatibility WMA is an acronym for Windows Media Audio and • refers to an audio compression technology developed by Microsoft Corporation. You can encode your files by using Windows Media • Player Ver.7, 7.1, Windows Media Player for Windows XP or Windows Media Player 9 Series. When encoding your files, use only applications • approved by Microsoft Corporation. If you use non- approved application, it may not work properly. This unit is compatible with audio files recorded with the • following sampling frequency: 32 kHz, 44.1 kHz and 48 kHz. It is not compatible with loss-less encoding. • Files with extensions .wma or .WMA can be played. • Playing MP3 (MPEG-1 Audio Layer-3) files This unit is compatible with audio files recorded with the • following sampling frequency: 32 kHz, 44.1 kHz and 48 kHz. Files with extensions .mp3 or .MP3 can be played. • For the best quality of sound, 128 kbps or higher bit rate • is recommended. Copy Control CD (CCCD) This product is designed to conform to CD-DA (Compact Disc Digital Audio). Any other discs than CD-DA are not guaranteed with their operation and performance in this product. DivX DivX • ® media files contain highly compressed video with high visual quality that maintains a relatively small file size. ABOUT DIVX VIDEO: • DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: • This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. 22 54B0101A_English.indd 22 54B0101A_English.indd 22 2/27/2010 17:23:30 2/27/2010 17:23:30

This section shows you the basics on how to play a disc. E Basic playback (DVD/VCD/Audio CD) Preparation Make sure that the B (Power) key on the unit is pressed (ON). (The B (Standby/On) indicator lights up.) Press 1. TV/DVD on the remote control to select the DVD mode. Place the disc in 2. the disc slot with the label side facing forward. (If the disc has a label.) Do not place a disc which is unplayable in this • unit. On the TV-screen, “ 3. ” changes to “Loading” and then playback commences. A menu screen will appear on the TV screen if • the disc has a menu feature. Press • / / / to select title, then press OK. Title is selected and play commences. Press 4. STOP to end playback. The unit can record where you stop a video, • but it depends on a disc you are using. Press PLAY to resume a playback point. The unit can store a memory of stopped point of last five discs that you have played. When one of these discs is next loaded, you can resume playback from where you stopped playing last time. If you press • STOP again (“Resume off” appears on the screen.), the unit will clear the memory of its stopped point. It is only DVD videos that a stopped point can • be stored in the unit with. You cannot save a stopped point for some • discs. If a number of discs played and stored in the unit exceeds five, a new memory will overwrite the old stored memory. E To start playback in the stop mode Press PLAY . NOTE If the unit does not operate property: • Static electricity, etc., may affect the player’s operation. Disconnect the AC power cord once, then connect it again. If a disc is inserted during some modes other than DVD • mode, it may switch to DVD mode and then playback may be begun automatically. E To pause playback (still mode) Press PAUSE during playback. To resume normal playback, press PLAY . The sound is muted during still mode. • E To stop playback Press STOP . E To remove the disc Press EJECT . Remove the disc after the disc comes out. Using inferior discs may result that you cannot remove • the disc. In this case, press PLAY to play the disc and then press EJECT on the unit. When a Disc is inserted on TV mode, the TV will • automatically change to DVD mode and start playback. (In some case it takes some time to insert a disc for loading.) When a Disc has been inserted previously, no other Disc can be inserted. Please insert Disc once again after removing previous disc on DVD mode. NOTE If a non-compatible disc is loaded, “Can’t play disc” or • “Incompatible disc region number Can’t play disc” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 21 and 37). Some discs may take a minute or so to start playback. • When you set a single-faced disc label backwards (i.e. • the wrong way), “Loading” will appear on the display for a few minutes and then “Can’t play disc” will continue to be displayed. Some playback operations of DVDs may be intentionally • fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs. Do not move the unit during playback. Doing so may • damage the disc. In many instances, a menu screen will appear after • playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press Power ( ) on your remote control once the movie is completed. There may be a slight delay between the button is • pressed and the function activates. E Playing in fast reverse or fast forward directions (DVD/VCD/Audio CD) Press REV or FWD during playback. REV : Fast reverse playback FWD : Fast forward playback Each time you press REV or FWD , the playback speed changes. To resume normal playback, press PLAY . NOTE The unit mutes sound during reverse and forward scan • of DVD/VCD discs. The playback speed may differ depending on the disc. • DVD Operation 23 54B0101A_English.indd 23 54B0101A_English.indd 23 2/27/2010 17:23:30 2/27/2010 17:23:30

Press PAUSE during playback. Each time you press REV or FWD , the picture advances one frame. To resume normal playback, press PLAY . NOTE The sound is muted during frame by frame playback • Reverse frame by frame does not work on VCD. • E Playing in slow-motion (DVD/VCD) Press SLOW or SLOW during playback. Each time you press SLOW or SLOW , the slow- motion speed changes. To resume normal playback, press PLAY . NOTE The sound is muted during slow-motion playback. • Reverse slow ( • ) does not work on VCD. E Locating a chapter or track (DVD/VCD/Audio CD) Press SKIP or SKIP repeatedly to display the chapter or track number you want. Press SKIP to playback starts from the selected chapter or track. Press SKIP to locate succeeding chapters or tracks. Playback starts from the beginning of the current chapter or track. NOTE A prohibition message “Depending on the disc, this • operation may be prohibited” or “This operation can’t be performed” may appear at the screen. This message means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit. Zooming (DVD/VCD) This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Press 1. ZOOM during playback. The centre part of the image will be zoomed in. Each press of ZOOM will change the Zoom 2x and 4x. Press 2. / / / to view a different part of the frame. You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode, press 3. ZOOM repeatedly to return to a 1:1 view. NOTE You can select the Pause or Slow in the zoom mode. • Some discs may not respond to zoom feature. • Locating desired scene (DVD/VCD/Audio CD) Use the title, chapter or track recorded on the disc to locate the desired point to playback. To check the title and chapter/track, press . Press 1. Number buttons (0–9) to input the number during playback or stop mode. If you input a wrong number, press • CANCEL. Refer to the package supplied with the disc to • check the numbers. Press 2. OK. Playback starts. When you change the title, playback starts • from Chapter 1 of the selected title. Some discs may not work in the above • operation. NOTE In case of the VCD playback with PBC, this feature does • not work. Turn off the PBC (see page 21). This Function cannot be used for DivX disc. • Changing Soundtrack Language (DVD/VCD) You can select the language when you play a multilingual disc. Press 1. AUDIO during playback. The current soundtrack language will appear. Current/Total Audio 1/2 English Dolby Digital 2/0CH Press 2. AUDIO repeatedly until the desired language is selected. The on screen display will disappear after a few • seconds. E In case of Video CD playback Audio type changes as follows each time you press AUDIO. Audio Left Audio Right Audio Stereo Subtitles (DVD) When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. Press 1. repeatedly during playback until the desired language is selected. Current/Total Subtitle 1/2 English To turn off the subtitle, press 2. until “Off” appears. The on screen display will disappear after a few • seconds. DVD Operation 24 54B0101A_English.indd 24 54B0101A_English.indd 24 2/27/2010 17:23:31 2/27/2010 17:23:31

• several times, the language is not recorded on the disc. The selected soundtrack language is cancelled when • you eject the disc. The initial default language or available language will be heard if the disc is played back again.It does not go back to the initial default language if the unit has a resuming memory. When you want to play DTS audio, connect this unit to a • DTS-compatible amplifer or decoder using a digital audio cable. Depending on the DVD, you may not be able to change • subtitles, or to turn subtitles on or off. While playing a DVD, the subtitle may change when you • loaded or eject the disc. In some cases, a selected subtitle language may not be • changed immediately. Changing angles (DVD) When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. Press 1. ANGLE during playback. The current angle will appear. Current/Total Angle 1/2 Press 2. ANGLE repeatedly until the desired angle is selected. NOTE Depending on the DVD, you may not be able • to change the angles even if multi-angles are recorded on the DVD. This function cannot be used for DivX disc. • Title selection (DVD) Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. Press 1. TOP MENU during playback. Title menu appears on the screen. Press 2. / / / to select the desired title. Press 3. OK. The playback of the selected title will start. NOTE Some DVDs allow you to select the disc • contents using the menu. When you playback these DVDs, you can • select the subtitle language and soundtrack language, etc. using the menu. DVD menu (DVD) Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. Press 1. DVD MENU during playback. The DVD menu appears on the screen. Press • DVD MENU again to resume playback at the scene when you pressed DVD MENU. Press 2. / / / to select the desired item. Press 3. OK. The menu continues to another screen. Repeat steps 2 and 3 to set the item completely. NOTE Depending on the DVD, you may not be able • to resume playback from the scene point when you press DVD MENU. Disc status With press of , the status of the disc will appear on the screen. To cancel the display, press again. Display messages may change at every time when you • press for some discs or files. Using HOME MENU E Playing a disc Press 1. SETUP during stop mode. HOME MENU will appear. Press 2. / / / to select Disc Navigator, then press OK. Audio Settings Video Adjust Disc Navigator Play Mode Initial Settings HOME MENU DVD Press 3. / to select desired option, then press OK. Disc Navigator Title Chapter Some discs may not work • Disc Navigator. Depending on a disc, you can select Title, • Chapter, or both. Press 4. / / / or Number Buttons (0-9) to select Title, Chapter, Track or Time, then press OK. Press • SKIP or SKIP to move next/ previous page. Press • RETURN to go to previous step. DVD Operation 25 54B0101A_English.indd 25 54B0101A_English.indd 25 2/27/2010 17:23:31 2/27/2010 17:23:31

Press 1. SETUP during stop mode. HOME MENU will appear. Press 2. / / / to select Disc Navigator, then press OK. Press 3. / to select folder, then press OK. Folder1 Folder2 Folder3 Folder4 00:00/ 00:00 0kbps Press 4. / to select file, then press OK. If you select JPEG file, unit shows the pictures • one after another automatically. Press • RETURN to return to HOME MENU screen. Press • SETUP to exit the menu. NOTE When music files and JPEG files are recorded • in one disc, you can play simultaneously. Please select the music file then select the JPEG file. File names of up to 14 letters can only be • shown on screen. Play mode A-B repeat playback A-B repeat playback allows you to repeat selection between two selected points. Press 1. PLAY MODE during playback. Play Mode screen will appear. A(Start Point) B(End Point) Off A-B Repeat Repeat Random Program Search Mode Play Mode Press 2. / to select A-B Repeat, then press or OK. Press 3. / to select A(Start Point), then press OK. The start point is selected. Press 4. / to select B(End Point), then press OK. The end point is selected. Playback starts at the point that you selected. Playback stops at the end point and returns to Point A automatically, then starts again. E To resume normal playback Select Off in step 3. NOTE Some discs may not work • Play Mode function. A-B Repeat playback does not work with MP3/WMA • CD. Repeat playback Press 1. PLAY MODE during playback. Play Mode screen will appear. Press 2. / to select Repeat, then press or OK. Press 3. / to select desired repeat option, then press OK. The unit automatically starts repeat playback after finishing the current title or chapter. E To resume normal playback Select Repeat Off in step 3. NOTE Some discs may not work with the repeat operation. • Random playback Press 1. PLAY MODE during playback. Play Mode screen will appear. Press 2. / to select Random, then press or OK. Press 3. / to select desired random playback option, then press OK. The unit automatically starts random playback. E To resume normal playback Select Random Off in step 3. NOTE You cannot play Random for programmed contents • (Random play is not permitted during Program playback). During Random playback, it may repeat the same title, • chapter or track. During stop mode, you can also enter • Play Mode screen by selecting Play Mode in HOME MENU. Program playback Press 1. PLAY MODE during playback. Play Mode screen will appear. Press 2. / to select Program, then press or OK. Press 3. / to select Create/Edit, then press OK. Create/Edit display differs, depending on discs or files. DVD Operation 26 54B0101A_English.indd 26 54B0101A_English.indd 26 2/27/2010 17:23:32 2/27/2010 17:23:32

File, then press OK. When you add a program, find where you • want to add it (Program Step) and select Title, Chapter or Track then press OK. (It will be added to the bottom if File is added.) To go to previous step, press • RETURN. To delete a program, select Program Step that • you want to delete and press CANCEL. Press 5. PLAY . To play existing programmed contents, select • Playback Start from Play Mode screen and press OK. To resume normal playback, select • Playback Stop in Play Mode screen and press OK. Your programmed contents are saved. To delete all programmed contents, select • Program Delete in Play Mode screen and press OK. NOTE You can repeat the programmed contents. • Select Program Repeat from Repeat in the Play Mode screen during Program playback. During stop mode, you can also enter • Play Mode screen by selecting Play Mode in HOME MENU. Locating desired scene Press 1. PLAY MODE during playback. Play Mode screen will appear. Press 2. / to select Search Mode, then press or OK. Press 3. / to select desired search mode option, then press or OK. Search Mode options differs, depending on • discs or files. Input Title, Chapter, Track or Folder number 4. or Time by using Number buttons (0-9) and press OK. 0 0 1 Title Search Chapter Search Time Search Input Chapter A-B Repeat Repeat Random Program Search Mode Play Mode For instance, if you want to enter 1hr 4min • (64:00), input 6, 4, 0, 0. NOTE You can locate desired scene in Menu screen • for some DVD video. During stop mode, you can also enter • Play Mode screen by selecting Play Mode in HOME MENU. Audio Settings menu The Audio Settings menu offers features for adjusting the way discs sound. Press 1. SETUP during stop mode. HOME MENU will appear. Press 2. / / / to select Audio Settings, then press OK. Audio Settings Video Adjust Disc Navigator Play Mode Initial Settings HOME MENU DVD Press 3. / / / to setting the option, then press OK. Audio Settings Equalizer Audio DRC Dialog Off Rock Pop Live Dance Techno Classic Soft Press 4. SETUP to save the setting. Equalizer Select the most suitable setting to match a category of music that you are listening to. Audio DRC Loud sound level goes down and quiet sound • level goes up while playing. This is useful, for instance, when you watch a film in the late night. It only works with Dolby Digital Sound. • The effect depends on your AV amplifier and • speakers volume. Adjust the sound as you wish and find the most effective setting. Dialog Adjust setting when you cannot hear dialogs very well. NOTE It may not be very effective for some discs or files. • DVD Operation 27 54B0101A_English.indd 27 54B0101A_English.indd 27 2/27/2010 17:23:32 2/27/2010 17:23:32

From the Video Adjust menu you can adjust various settings that affect how the picture is presented. Press 1. SETUP during stop mode. HOME MENU will appear. Press 2. / / / to select Video Adjust, then press OK. Audio Settings Video Adjust Disc Navigator Play Mode Initial Settings HOME MENU DVD Press 3. / / / to setting the option, then press OK. Sharpness Brightness Contrast Gamma Hue Chroma Level Fine Standard Soft Video Adjust Press 4. SETUP to save the setting. Sharpness Adjust sharpness of images. Brightness Adjust brightness of images. Contrast Adjust a ratio of brightness between the brightest part and the darkest part. Gamma Emphasize dark part of images. Hue Adjust a balance between green and red. Chroma Level Adjust color density. It is effective with animation or something with high color density. NOTE It may not be very effective for some discs or files. • DVD Operation Customizing The Function Settings You can change the default settings to customize performance to your preference. E Setting procedure Press 1. SETUP during stop mode. HOME MENU will appear. Press 2. / / / to select Initial Settings, then press OK. Audio Settings Video Adjust Disc Navigator Play Mode Initial Settings HOME MENU DVD Press 3. / / / to select the desired option, then press OK. Change the selection using 4. / / / or OK, by referring to the corresponding page 29. Repeat steps 3 and 4 to change other option. • To clear 5. HOME MENU screen, press SETUP. 28 54B0101A_English.indd 28 54B0101A_English.indd 28 2/27/2010 17:23:33 2/27/2010 17:23:33

Digital Out On Digital audio is output from the digital outputs. Off No digital audio output. Dolby Digital Out Dolby Digital Dolby Digital encoded digital audio is output when playing a Dolby Digital DVD disc. Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being output. DTS Out DTS DTS encoded digital audio is output when playing a DTS disc. (Noise will be output if your amplifier/receiver is not compatible with DTS audio.) Off No digital audio is output. 96kHz PCM Out 96kHz > 48kHz 96 kHz digital audio is converted to 48 kHz for digital output. 96kHz 96 kHz digital audio is output as is at 96 kHz. MPEG Out MPEG MPEG encoded digital audio is output as is. MPEG > PCM MPEG encoded digital audio is converted to PCM audio for digital output. Video Output settings TV Screen 4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are shown with black bars top and bottom. 4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are shown with the sides cropped so that the image fills the screen. 16:9 (Wide) Set if you have a widescreen TV. NTSC Out NTSC Output NTSC discs as NTSC-TV system. NTSC > PAL Output NTSC discs converting to PAL-TV system. Language settings Audio Language English If there is an English soundtrack on the disc then it will be played. Languages as displayed If there is the language selected on the disc, then it will be played. Other Language Select to choose a language other than the ones displayed. (see Language Code List on page 31) Subtitle Language English If there is an English subtitle on the disc, then it will be displayed. Languages as displayed If there is the subtitle language selected on the disc, then it will be displayed. Other Language Select to choose a language other than the ones displayed. (see Language Code List on page 31) DVD Menu Lang. w/Subtitle Lang. DVD disc menus will be displayed in the same language as your selected subtitle language, if possible. Languages as displayed DVD disc menus will be displayed in the selected language, if possible. Other Language Select to choose a language other than the ones displayed. (see Language Code List on page 31) Subtitle Display On Subtitles are displayed according to your selected subtitle language (see above). Off Subtitles are always off by default when you play a DVD disc (note that some discs override this setting). Display settings Angle Indicator On A camera icon is displayed on-screen during multi-angle scenes on a DVD disc. Off No multi-angle indication is shown. Options settings Parental Lock See page 30. DivX VOD Activate Display the player’s registration code required to play DivX VOD files. Deactivate Display the VOD deactivation code. DivX® VOD content is protected by DRM (Digital Rights Management) system. This restricts playback of content to specific registered devices. If the incorrect DRM file is loaded, “Authorization Error” will appear on the screen. When you attempt to play DivX® VOD, the number of plays is limited will appear on the screen. If the number of plays goes over the limit, then “Rental Expired” will be displayed. • Customizing The Function Settings DVD Operation NOTE If you want to change the OSD language, you can perform it by TV menu. • 29 54B0101A_English.indd 29 54B0101A_English.indd 29 2/27/2010 17:23:34 2/27/2010 17:23:34

Such discs can be limited not to playback with the unit. E How to into the Parental menu Press 1. SETUP during stop mode. HOME MENU will appear. Press 2. / / / to select Initial Settings, then press OK. Press 3. / to select Options, then press . Then press to enter the Parental Lock menu. E Set Password Press 1. or to select Password, then press OK. Parental Lock DivX VOD Digital Audio Out Video Output Language Display Options Initial Settings Password Level Change Country Code Press 2. Number buttons (0–9) to input the password, then press OK. Digital Audio Out Video Output Language Display Options Initial Settings Parental Lock: Register Code Number E Change Password Press 1. or to select Password Change, then press OK. Press 2. Number buttons (0–9) to input the current password, then press OK. Press 3. Number buttons (0–9) to input the new password. Press OK. Now your new password has been set. Be sure to remember this number! Parental Lock: Password Change Password New Password Digital Audio Out Video Output Language Display Options Initial Settings E Level Change Press 1. or to select Level Change, then press OK. Parental Lock Digital Audio Out Video Output Language Display Options Initial Settings Password Change Level Change Country Code DivX VOD Press 2. Number buttons (0–9) to input the current password, then press OK. Digital Audio Out Video Output Language Display Options 1 2 3 4 5 6 7 8 Off Initial Settings Parental Lock: Level Change Password Press 3. or to select from the level 1 to level 8. The limitation will be more severe as the level number is lower. Then press OK. Digital Audio Out Video Output Language Display Options 1 2 3 4 6 7 8 Off Initial Settings Parental Lock: Level Change Password 5 Level 1: DVD software for adults cannot be played back. Level 8: Virtually all DVD software can be played back. Level Off: The parental control setting does not function. E Country Code Press 1. or to select Country Code, then press OK. Parental Lock Digital Audio Out Video Output Language Display Options Initial Settings Password Change Level Change Country Code DivX VOD Press 2. Number buttons (0–9) to input the current password, then press OK. Digital Audio Out Video Output Language Display Options Initial Settings Parental Lock: Change Country Code Password Country Code List Code us 2 1 1 9 Press 3. or to select the input mode from Country Code List or Code. Digital Audio Out Video Output Language Display Options Initial Settings Parental Lock: Change Country Code Password Country Code List Code us 2 1 1 9 When you selected • Country Code List : Press or to select Country Code, then press OK. When you selected • Code : Press then use the Number buttons (0-9) to enter the 4-digit Country Code. Press OK. (see Country/Area Code List on page 31) NOTE Depending on the discs, the unit cannot limit playback. • Some discs may not be encoded with specific rating • level information though its disc jacket says “adult.” For those discs, the age restriction will not work. If you input a wrong number, press • , then input correct number. 30 54B0101A_English.indd 30 54B0101A_English.indd 30 2/27/2010 17:23:34 2/27/2010 17:23:34

Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish (es), 0519 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba), 0201 Byelorussian (be), 0205 Bulgarian (bg), 0207 Bihari (bh), 0208 Bislama (bi), 0209 Bengali (bn), 0214 Tibetan (bo), 0215 Breton (br), 0218 Catalan (ca), 0301 Corsican (co), 0315 Czech (cs), 0319 Welsh (cy), 0325 Danish (da), 0401 Bhutani (dz), 0426 Esperanto (eo), 0515 Estonian (et), 0520 Basque (eu), 0521 Persian (fa), 0601 Finnish (fi), 0609 Fiji (fj), 0610 Faroese (fo), 0615 Frisian (fy), 0625 Irish (ga), 0701 Scot-Gaelic (gd), 0704 Galician (gl), 0712 Guarani (gn), 0714 Gujarati (gu), 0721 Hausa (ha), 0801 Hindi (hi), 0809 Croatian (hr), 0818 Hungarian (hu), 0821 Armenian (hy), 0825 Interlingua (ia), 0901 Interlingue (ie), 0905 Inupiak (ik), 0911 Indonesian (in), 0914 Icelandic (is), 0919 Hebrew (iw), 0923 Yiddish (ji), 1009 Javanese (jw), 1023 Georgian (ka), 1101 Kazakh (kk), 1111 Greenlandic (kl), 1112 Cambodian (km), 1113 Kannada (kn), 1114 Kashmiri (ks), 1119 Kurdish (ku), 1121 Kirghiz (ky), 1125 Latin (la), 1201 Lingala (ln), 1214 Laothian (lo), 1215 Lithuanian (lt), 1220 Latvian (lv), 1222 Malagasy (mg), 1307 Maori (mi), 1309 Macedonian (mk), 1311 Malayalam (ml), 1312 Mongolian (mn), 1314 Moldavian (mo), 1315 Marathi (mr), 1318 Malay (ms), 1319 Maltese (mt), 1320 Burmese (my), 1325 Nauru (na), 1401 Nepali (ne), 1405 Norwegian (no), 1415 Occitan (oc), 1503 Oromo (om), 1513 Oriya (or), 1518 Panjabi (pa), 1601 Polish (pl), 1612 Pashto, Pushto (ps), 1619 Quechua (qu), 1721 Ladin (rm), 1813 Kirundi (rn), 1814 Romanian (ro), 1815 Rwanda (rw), 1823 Sanskrit (sa), 1901 Sindhi (sd), 1904 Sangho (sg), 1907 BCS (sh), 1908 Sinhalese (si), 1909 Slovak (sk), 1911 Slovenian (sl), 1912 Samoan (sm), 1913 Shona (sn), 1914 Somali (so), 1915 Albanian (sq), 1917 Serbian (sr), 1918 Siswati (ss), 1919 Sesotho (st), 1920 Sundanese (su), 1921 Swahili (sw), 1923 Tamil (ta), 2001 Telugu (te), 2005 Tajik (tg), 2007 Thai (th), 2008 Tigrinya (ti), 2009 Turkmen (tk), 2011 Tagalog (tl), 2012 Setswana (tn), 2014 Tonga (to), 2015 Turkish (tr), 2018 Tsonga (ts), 2019 Tatar (tt), 2020 Twi (tw), 2023 Ukrainian (uk), 2111 Urdu (ur), 2118 Uzbek (uz), 2126 Vietnamese (vi), 2209 Volapuk (vo), 2215 Wolof (wo), 2315 Xhosa (xh), 2408 Yoruba (yo), 2515 Zulu (zu), 2621 Country/Area Code List Country/Area, Country/Area code, Country/Area code letter Argentina, 0118, ar Australia, 0121, au Austria, 0120, at Belgium, 0205, be Brazil, 0218, br Canada, 0301, ca Chile, 0312, cl China, 0314, cn Denmark, 0411, dk Finland, 0609, fi France, 0618, fr Germany, 0405, de Hong Kong, 0811, hk India, 0914, in Indonesia, 0904, id Italy, 0920, it Japan, 1016, jp Republic of Korea, 1118, kr Malaysia, 1325, my Mexico, 1324, mx Netherlands, 1412, nl New Zealand, 1426, nz Norway, 1415, no Pakistan, 1611, pk Philippines, 1608, ph Portugal, 1620, pt Russian Federation, 1821, ru Singapore, 1907, sg Spain, 0519, es Sweden, 1905, se Switzerland, 0308, ch Taiwan, 2023, tw Thailand, 2008, th United Kingdom, 0702, gb USA, 2119, us 31 54B0101A_English.indd 31 54B0101A_English.indd 31 2/27/2010 17:23:35 2/27/2010 17:23:35

HDMI connection Example of connectable devices E DVD E Blu-ray player/recorder The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversion is no longer necessary in the connected devices, which also would result in quality losses. HDMI DVI PC IN DVI/HDMI conversion Using an DVI/HDMI adapter cable, the digital video • signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. Both HDMI and DVI use the same HDCP copy • protection method. Supported video signal: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p See page 35 for PC signal compatibility. YPbPr (Component connection) Example of connectable devices E VCR E DVD E Blu-ray player/recorder You will enjoy accurate colour reproduction and high quality images through the (YPbPr) when connecting a DVD recorder or other recording equipment. COMPONENT E Before connecting ... Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you • get the best possible audiovisual quality to maximise the potential of the TV and the connected device. HDMI device HDMI cable DVI-HDMI cable Audio cable (YPbPr) Component Connection Component cable Audio cable 19” 22” 26” 32” 32 54B0101A_English.indd 32 54B0101A_English.indd 32 2/27/2010 17:23:35 2/27/2010 17:23:35

E Decoder E When using the SCART 1 Full SCART, which transmits RGB, S-Video and CVBS in, and CVBS tuner out. SCART SCART AV1 Example of connectable devices E VCR E DVD recorder E When using the SCART 2 Half SCART, which transmits S-Video or CVBS in, and CVBS monitor out. SCART AV2 Connecting external devices NOTE In cases when the decoder needs to receive a signal • from the TV, make sure to select the appropriate input source. Do not connect the decoder to the SCART 2. • You cannot connect the VCR with Decoder using a fully • wired SCART cable under the SCART 2 source. S-Video connection Example of connectable devices E VCR E DVD E Blu-ray player/recorder E Game concole E Camcorder You can use the S-Video when connecting to a game console, camcorder, a DVD recorder and some other equipment. NOTE When using a S-video cable, you also need to connect • an audio cable (R/L). SCART cable Decoder SCART cable VCD / DVD recorder S-Video connection Audio cable S-video cable 26” 32” 26” 19” 32” 22” 19” 22” 33 54B0101A_English.indd 33 54B0101A_English.indd 33 2/27/2010 17:23:36 2/27/2010 17:23:36

Speaker / Amplifier connection E Connecting an amplifier with digital audio input DIGITAL AUDIO COAXIAL OUT Inserting a CA Card In order to receive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of your TV set. The CI Module and the CA Card are not supplied accessories. They are usually available from your dealer. Inserting the CA Card into the CI Module With the side with the gold coloured contact 1. chip facing the side of the CI Module marked with the provider’s logo, push the CA Card into the CI Module as far as it will go. Note the direction of the arrow printed on the CA card. Inserting the CI Module in the CI slot. 2. Carefully insert the CI Module in the CI slot with 3. the contact side forward. The logo on the CI Module must be facing forward from the rear of the TV. Do not use excessive force. Make sure the module is not bent in the process. Access CI Module service After inserting and activating the CI Module, make sure the input source is TV. Press 1. TV MENU on the remote control. Go to 2. > Common Interface. On-screen applications and content are provided by your digital TV service operator. Speaker / Amplifier connection Digital audio in (COAXIAL) Digital audio cable 34 54B0101A_English.indd 34 54B0101A_English.indd 34 2/27/2010 17:23:38 2/27/2010 17:23:38

Connecting a PC Supported display resolutions Computer formats (PC) Resolution Refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 720 60Hz 1280 x 768 60Hz 1360 x 768 60Hz Video formats (HDMI only) Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz, 60Hz 1080i 50Hz, 60Hz 1080p 24Hz, 50Hz, 60Hz HDMI cable DVI-HDMI cable Ø 3,5 mm stereo mini jack cable Ø 3,5 mm stereo mini jack cable DVI-I / RGB Ø 3,5 mm stereo mini jack cable conversion cable RGB cable 35 54B0101A_English.indd 35 54B0101A_English.indd 35 2/27/2010 17:23:39 2/27/2010 17:23:39

• Make sure the RGB cable is properly connected. (See page 35.) • Make sure the output signal of the PC and the input signal setting of the • LCD TV set are matched. (See page 35.) Some software prohibit video playback on an external display when playing • back a video with a notebook PC. This is not attributable to a problem with the LCD TV set. There is no sound. • Make sure the PC audio cable is properly connected. (See page 35.) • Check if the mute function activates, or if the volume is set to minimum. • (See page 4.) The text is blurred. • Adjust “Clock” and “Phase” using the PC Setting menu. (See page 13.) • The image is not displayed in the • center of the screen. Adjust “Hor Position” and “Ver Position” using the PC Setting menu. (See • page 13.) Troubleshooting Troubleshooting-PC mode Problem Possible Solution No power. • Check if you pressed • on the TV. (See page 9.) If the indicator on the TV lights up red, press • B on the remote control unit. Is the AC cord disconnected? (See page 9.) • Check if you pressed • B on the remote control unit. (See page 10.) Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause • improper operation. In this case, operate the unit after first turning the power off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes. Remote control unit does not • operate. Are batteries inserted with polarity (+, −) aligned? (See page 8.) • Are batteries worn out? (Replace with new batteries.) • Are you using it under strong or fluorescent lighting? • Is a fluorescent light illuminating the remote control sensor? • Picture is stretched vertically. • Are wide mode adjustments made correctly? (See page 17.) • Strange colour, light colour, or dark, • or colour misalignment. Adjust the picture tone. (See page 13.) • Is the room too bright? The picture may look dark in a room that is too • bright. Power is suddenly turned off. • The unit’s internal temperature has increased. • Remove any objects blocking vent or clean. • No picture. • Is connection to other components correct? (See pages 32 - 35.) • Is the correct input source selected? (See page 10.) • Is picture adjustment correct? (See page 13.) • Is the antenna connected properly? (See page 9.) • No sound. • Is the volume too low? (See page 4.) • Make sure that headphones are not connected. (See page 5.) • Check if you pressed • on the remote control unit. (See page 4.) The TV sometimes makes a cracking • sound. This is not a malfunction. This happens when the cabinet slightly expands • and contracts according to change in temperature. This does not affect the TV’s performance. 36 54B0101A_English.indd 36 54B0101A_English.indd 36 2/27/2010 17:23:40 2/27/2010 17:23:40

• No disc is inserted. (See page 23.) • The disc may be dirty. Clean up the disc. (See page 21.) • The TV/DVD cannot play CD-ROMs, etc. (See page 21.) • No picture. • TV/DVD selector is not set correctly. (See page 23.) • No sound. • Check the input selector of the amplifier is set properly. • The TV/DVD is in the special playback mode. (See pages 23, 24.) • Select the correct Audio Output position on AV amplifier. • Picture is distorted during fast • reverse/forward playback. The picture will be distorted occasionally. • Stopping playback, search, slow • motion play, repeat play, or program play, etc. cannot be performed. Some discs may not do some of the functions. • No surround sound. • The setup does not match your stereo system. • The TV/DVD or remote operation • key is not functioning. Turn off the TV/DVD and unplug the AC power cord for several minutes, • then replug it. Playback does not start when the • title is selected. Check the Parental setup. (See page 30.) • Audio soundtrack and/or subtitle • language is not changed when you playback a DVD. Multilingual language is not recorded on the DVD disc. (See page 24.) • No subtitle. • Some discs have no subtitles. (See page 24.) • Subtitles are cleared. Press • . (See page 24.) Angle cannot be changed. • Multi-angles are not recorded on the DVD disc. (See page 25.) • “This operation can’t be performed” • appears on the screen. The function is prohibited with the TV/DVD or the disc. (See page 24.) • Cautions regarding use in high and low temperature environments When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear • slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct • sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: –20°C to +60°C. Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11). NOTE For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can • be connected to television distribution systems. Troubleshooting-DVD 37 54B0101A_English.indd 37 54B0101A_English.indd 37 3/2/2010 11:01:12 3/2/2010 11:01:12

Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L/L’) Digital DVB-T (2K/8K OFDM, 16QAM/64QAM), DVB-T HD (H.264) Receiving Channel VHF/UHF ATV : Ire-E69, DVB-T : E5-E69 CATV S-band, S1–S41ch TV-Tuning System Auto Preset 2,000 ch, Auto Label, Auto Sort STEREO/BILINGUAL NICAM/A2 Audio out 1.5W x 2 Terminals Rear AV 1 SCART (AV input, Y/C input, RGB input, TV output) AV 2 S-VIDEO (Y/C input), RCA pin (AV input) COMPONENT Y/Pb(Cb)/Pr(Cr), RCA pin (L/R) HDMI / DVI HDMI in with HDCP PC / DVI AUDIO Ø 3.5mm jack (Audio input) PC - INPUT D-sub 15 pin (AV input) OUTPUT Coaxial Digital audio output ANTENNA UHF/VHF 75 q HEADPHONE Ø 3.5mm jack (Audio output) Side C. I. (Common Interface) EN50221, R206001 OSD language English, German, French, Italian, Dutch, Spanish, Greek, Portuguese, Swedish, Finnish, Russian, Polish, Turkish, Hungarian, Czech, Slovak, Danish, Norwegian, Estonian, Latvian, Lithuanian, Slovenian, Ukrainian Power Requirement AC 220-240 V, 50 Hz Power Consumption 36 W (0.7 W Standby with AC 230V) 49 W (0.7 W Standby with AC 230V) Weight TV + stand 4.8 kg 5.3 kg TV only 4.2 kg 4.7 kg Size TV + stand 472 mm x 361 mm x 201 mm 536.5 mm x 396 mm x 201 mm TV only 472 mm x 332 mm x 67 mm 536.5 mm x 367.5 mm x 67 mm DVD section Signal system NTSC, PAL Applicable disc DVD (12 cm, 8 cm), CD (12 cm, 8 cm) Frequency response DVD : 4 Hz - 22K Hz / CD : 4 Hz - 20K Hz Wow and flutter Below Measurable Level Pickup CD : Wavelength: 780 - 790 nm Maximum output power: 7 mW DVD : Wavelength: 652 - 662 nm Maximum output power: 5 mW Operating temperature +5°C to +40°C Specification 38 54B0101A_English.indd 38 54B0101A_English.indd 38 2/27/2010 17:23:41 2/27/2010 17:23:41

Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L/L’) Digital DVB-T (2K/8K OFDM, 16QAM/64QAM), DVB-T HD (H.264) Receiving Channel VHF/UHF ATV : Ire-E69, DVB-T : E5-E69 CATV S-band, S1–S41ch TV-Tuning System Auto Preset 2,000 ch, Auto Label, Auto Sort STEREO/BILINGUAL NICAM/A2 Audio out 10W x 2 Terminals Rear AV 1 SCART (AV input, Y/C input, RGB input, TV output) AV 2 SCART (AV input, Y/C input, TV monitor) AV 3 RCA pin (AV input) COMPONENT Y/Pb(Cb)/Pr(Cr), RCA pin (L/R) HDMI / DVI HDMI in with HDCP HDMI HDMI in with HDCP PC / DVI AUDIO Ø 3.5mm jack (Audio input) PC - INPUT D-sub 15 pin (AV input) OUTPUT Coaxial Digital audio output Side C. I. (Common Interface) EN50221, R206001 ANTENNA UHF/VHF 75 q HEADPHONE Ø 3.5mm jack (Audio output) OSD language English, German, French, Italian, Dutch, Spanish, Greek, Portuguese, Swedish, Finnish, Russian, Polish, Turkish, Hungarian, Czech, Slovak, Danish, Norwegian, Estonian, Latvian, Lithuanian, Slovenian, Ukrainian Power Requirement AC 220-240 V, 50 Hz Power Consumption 65 W (0.5 W Standby with AC 230V) 95 W (0.5 W Standby with AC 230V) Weight TV + stand 9.6 kg 11.5 kg TV only 8.2 kg 10.0 kg Size TV + stand 661 mm x 508 mm x 243 mm 796.2 mm x 596.6 mm 243 mm TV only 661 mm x 462.5 mm x 100.5 mm 796.2 mm x 546.6 mm x 105.5 mm DVD section Signal system NTSC, PAL Applicable disc DVD (12 cm, 8 cm), CD (12 cm, 8 cm) Frequency response DVD : 4 Hz - 22K Hz / CD : 4 Hz - 20K Hz Wow and flutter Below Measurable Level Pickup CD : Wavelength: 780 - 790 nm Maximum output power: 7 mW DVD : Wavelength: 652 - 662 nm Maximum output power: 5 mW Operating temperature +5°C to +40°C As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes • for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE Refer to the inside back cover for dimensional drawings. • Audio cannot be output through the HDMI terminal. • Specification Appendix 39 54B0101A_English.indd 39 54B0101A_English.indd 39 2/27/2010 17:23:41 2/27/2010 17:23:41

1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. 2. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch. B. Information on Disposal for Business Users 1. In the European Union If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of your used products. 2. In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal. For EU: The crossed-out wheeled bin Implies that used batteries should not be put to the general household waste ! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the selling point. For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery. Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. 40 54B0101A_English.indd 40 54B0101A_English.indd 40 2/27/2010 17:23:41 2/27/2010 17:23:41