Sharp LC-20AD5E Operation Manual

LCD-FARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE MANEJO LC-20AD5E LC-20AD5S LC-26AD5E LC-26AD5S LC-32AD5E LC-32AD5S ENGLISH FRANÇAIS DEUTSCH ITALIANO NEDERLANDS ESPAÑOL

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows; • The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. • The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: • If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. • The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

(×1) AC cord (×2) Cable clamp (×1) *1 Stand unit (×1) *2 (For Europe, except U.K. and Eire) (For U.K. and Eire) U.K. type 3-pin AC cord is only included with models LC-20AD5E, LC-26AD5E, LC-32AD5E. Page 5 and 6 Page 4 Page 4 Page 3 “AA” size battery (×2)............Page 5 Operation manual (This publication) • • *1 This optional cable clamp comes with LC-26AD5E, LC-26AD5S, LC-32AD5E and LC-32AD5S models only. *2 The stand unit is not supplied for the LC-20AD5E or LC-20AD5S model. The stand unit is attached before shipment. OPERATION MANUAL The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. The factory preset PIN (Personal Identification Number) for DTV is “0000”. The examples used throughout this manual are based on the LC-32AD5E model. • • • ENGLISH ENGLISH Contents Supplied accessories...................................................................1 Dear SHARP customer..................................................................2 Important Safety Precautions......................................................2 Trademarks....................................................................................2 Quick guide....................................................................................3 Attaching the stand (LC-26AD5E, LC-26AD5S, LC-32AD5E, LC-32AD5S)............ 3 Setting the TV........................................................................... 3 Inserting the batteries............................................................... 5 Using the remote control unit.................................................... 5 Cautions regarding the remote control unit....................... 5 Remote control unit.................................................................. 6 TV (Top/Rear view)................................................................... 7 TV (Front view)......................................................................... 8 Turning on the power................................................................ 8 Standby mode.......................................................................... 8 Initial auto installation............................................................... 8 Using external equipment............................................................9 Connecting a VCR.................................................................... 9 Connecting a game console or camcorder............................... 9 Connecting a DVD player......................................................... 9 Connecting a decoder............................................................ 10 Connecting a PC.................................................................... 10 Menu operations.........................................................................11 Menu operation buttons......................................................... 11 On-Screen Display................................................................. 11 Common operations............................................................... 12 Picture menu.......................................................................... 12 Picture adjustments........................................................ 12 Picture Mode Settings.................................................... 13 Audio menu............................................................................ 13 Audio adjustments.......................................................... 13 Audio Mode Settings...................................................... 13 Setup menu............................................................................ 14 Setup Settings................................................................ 14 Programmes................................................................... 15 Child lock........................................................................ 16 4:3 mode........................................................................ 17 Option menu.......................................................................... 17 Option Settings............................................................... 17 Useful features............................................................................18 WIDE MODE.......................................................................... 18 Still image.............................................................................. 18 Using the Programme Table................................................... 19 Teletext function..................................................................... 19 DTV menu operations.................................................................20 DTV menu operation buttons.................................................. 20 DTV On-Screen Display......................................................... 20 DTV common operations........................................................ 20 About using the character set screen............................. 21 Language Setup..................................................................... 21 Channel Organizer................................................................. 21 Installation.............................................................................. 23 Auto Scan....................................................................... 23 Manual Scan.................................................................. 23 Carrier Setup.................................................................. 24 System Configuration............................................................. 24 Display Setup................................................................. 24 Password Setup (Parental Lock)..................................... 25 Technical Information............................................................. 25 Version........................................................................... 25 Software upgrade........................................................... 25 Common Interface.................................................................. 26 Inserting a CA card ......................................................... 26 Useful features (DTV)..................................................................27 About EPG............................................................................. 27 Using the EPG................................................................ 27 Using the EPG Timer ..................................................... 27 Using the digital channel list................................................... 28 Viewing a service banner....................................................... 28 Using the multi audio function................................................ 29 Displaying subtitles................................................................ 29 Using the Digital Service (UK only)........................................ 29 Appendix......................................................................................30 PC compatibility chart..................................................... 30 RS-232C port specifications........................................... 30 Troubleshooting...................................................................... 32 Specifications......................................................................... 33 Optional accessories.............................................................. 33 End of Life Disposal....................................................................34 Supplied accessories

Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer. When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven floor surface can cause the product to fall from the cart. Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built- in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact applied. If the LCD panel is broken, be careful not to be injured by broken glass. Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat generating products (including amplifiers). To prevent fire, never place any type of candle or open flame on the top or near the TV set. To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items. Do not display a still picture for a long time, as this could cause an afterimage to remain. There is power consumption always if main plug is connected. The LCD panel is a very high technology product, giving you fine picture details. Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or red. This is within product specifications and does not constitute a fault. Precautions when transporting the TV When moving the TV, it should always be carried by two people, using both hands, be careful not to apply pressure to the display. Cleaning tips Make sure to brush off the dirt on the cloth before cleaning the cabinet. Make sure to spray water 4-6 times onto the cloth for this purpose before cleaning the cabinet wiping in one direction. After cleaning, wipe the cabinet to remove any moisture. • • • • • • • • • • • • Trademarks “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.” • The “HD ready” Logo is a trademark of EICTA. • The DVB logo is the registered trademark of the Digital Video Broadcasting-DVB-Project. •

Before performing work spread cushioning over the base area to lay the TV on, making sure the area is completely flat. This will prevent it from being damaged. Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal. 1 Confirm the 8 screws supplied with the TV. Short screws (X4) (used in step 2) Long screws (X4) (used in step 3) 2 Remove the covering sheet before use. Set the post for the stand unit onto the box. 2 Attach the base to the post. 3 Attach the base to the 4 screws into the 4 holes on the bottom of the base. NOTE • To detach the stand, perform the step in reverse order. Hex key Screw Soft cushion 3 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV. Setting the TV Removing the covering sheet For protection, sheets , and are covering the product. Please remove these sheets before use. ( : LC-20AD5E, LC-20AD5S Black models only / , : Black models only) Remove each sheet. Tear from the cut point and remove the sheet by peeling it back to either side. There is a protective film covering the face of the remote control. Please remove this film before use. Hex key Screw

outlet, and keep the power plug within reach. Standard DIN45325 plug (IEC 169-2) 75-ohm coaxial cable (For Europe, except U.K. and Eire) AC cord Antenna Connect the antenna cable from your antenna-/cable socket or the (room-/roof) antenna for antenna input terminal on the back of your TV set to receive digitally/ terrestrially broadcast stations. An indoor antenna can also be used under good reception conditions. Bundling the cables Cable clamp LC-26AD5E, LC-26AD5S LC-32AD5E, LC-32AD5S LC-20AD5E, LC-20AD5S LC-20AD5E, LC-20AD5S LC-26AD5E, LC-26AD5S LC-32AD5E, LC-32AD5S Removing the terminal cover Pull down the hooks to open the cover. LC-20AD5E, LC-20AD5S LC-26AD5E, LC-26AD5S LC-32AD5E, LC-32AD5S Cable clamp This cable clamp is already attached to the housing of the LC-20AD5E and LC-20AD5S models. (For U.K. and Eire) Setting the TV on the wall This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 33.) The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. When you use the AN-26AG1 (SHARP) for LC-26AD5E/LC-26AD5S or AN-37AG2 (SHARP) for LC-32AD5E/LC- 32AD5S wall mount bracket, set the angle of the TV up to 20°. Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask a qualified service p ersonnel about using an optional bracket to mount the TV to the wall. • • • •

Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries. 1 Open the battery cover. 2 Insert two supplied “AA” size batteries. 3 Close the battery cover. Place batteries with their terminals corresponding to the (+) and (−) indications in the battery compartment. • CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. Do not mix batteries of different types. Different types of batteries have different characteristics. Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth. The batteries supplied with this product may have a shorter life expectancy due to storage conditions. If you will not be using the remote control unit for an extended period of time, remove the batteries from it. Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation. • • • • • 30 o 5m 30 o Remote control sensor Cautions regarding the remote control unit Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit. The remote control unit may not work properly if the remote control sensor of the TV is under direct sunlight or strong lighting. In such case, change the angle of the lighting or TV, or operate the remote control unit closer to the remote control sensor. • • •

1 4 2 3 6 7 8 16 17 18 19 13 20 21 22 23 24 9 10 11 25 12 14 15 5 1 (Standby/On) Enter standby mode or turn on the power. (See page 8.) 2 DTV/RADIO* DTV: Switch between RADIO and DTV mode. 3 DTV/TV Switch between analogue TV and DTV mode. 4 (Mute) Switch the sound on and off. 5 0–9 Set the channel in TV and DTV mode. Set the page in Teletext mode. 6 (Flashback) Press to return to the previous image in normal viewing mode. 7 (WIDE MODE) Select the wide mode. (See page 18.) 8 (Sound mode) Select the sound multiplex mode. (See below.) 9 EPG DTV: To display EPG (Electronic Programme Guide) screen. 10 (Teletext) Displays the Teletext mode screen. (See page 19.) DTV: Select DTV data broadcasting and TELETEXT. 11 END Exit the menu screen. 12 (Reveal hidden Teletext) TELETEXT: (See page 19.) 13 (Freeze/Hold) TV/DTV: You can freeze a motion picture on the screen. TELETEXT: (See page 19.) 14 (+/−) (Volume) (+) Increase the volume. (−) Decrease the volume * If “Sweden” was selected on the “First installation (Country)” screen, you can switch between RADIO, DATA and DTV modes. 15 P ( / ) TV/DTV: Select the channel. External: Switch to TV or DTV input mode. Teletext: Move to the next/previous page. 16 (INPUT SOURCE) Select an input source. (See page 9.) 17 SLEEP Set the sleep timer in units of 30 min. up to max. 2 hr. 18 (Display information) Display various information; channel number, sleep timer, etc. (See pages 27 and 28.) 19 DTV MENU DTV: Display DTV Menu screen. 20 MENU Display the MENU screen. (See page 11.) 21 ▲/▼/◀/▶ (Cursor) Select a desired item on the setting screen. OK Execute a command within the menu screen. DTV: Display the Channel list. 22 (Top/Bottom/Full) Set the area of magnification in Teletext mode. (See page 19.) 23 (Subpage) (See page 19.) 24 (Subtitle for Teletext) TELETEXT: To turn the subtitles on and off. (See page 19.) DTV: Display the subtitle selection screen. (See page 29.) 25 Colour (Red/Green/Yellow/Blue) TELETEXT: Select a page. (See page 19.) DTV: The coloured buttons are used to select correspondingly to the coloured items in the menu screen. ● Using on the remote control unit DTV mode: Press to open the multi audio screen. (See page 29.) Analogue TV mode: Each time you press , the mode switches as illustrated in the following tables. Broadcast Stereo Bilingual Monaural NICAM Mono Stereo Sound 2 Sound 1+2 Mono Sound 1 Mono Nicam A2 Stereo Mono Stereo Sound 2 Sound 1+2 Mono Sound 1 Mono NOTE When no signal is input, the sound mode will display “Mono”. •

(Input button) (Power button) P ( / ) (Programme [channel] buttons) (−/+) (Volume buttons) EXT 6 (HDMI) terminal EXT 5 (HDMI) terminal EXT 5/7, EXT 6 Audio terminals COMMON INTERFACE slot EXT 7 terminal RS-232C terminal Antenna input terminal EXT 4 (COMPONENT/AUDIO) terminals EXT 3 terminals OUTPUT (Audio) terminals Headphone jack EXT1, 2 (RGB) terminals AC INPUT terminal COMMON INTERFACE slot Headphone jack EXT 3 terminal EXT 4 (COMPONENT/AUDIO) terminals OUTPUT (Audio) terminals EXT1, 2 (RGB) terminals RS-232C terminal Antenna input terminal EXT 5 (HDMI) terminal EXT 5/6 Audio terminals EXT 6 terminal (Power button) (Input button) MENU button P ( / ) (Programme [channel] buttons) (+/−) (Volume buttons) LC-20AD5E, LC-20AD5S LC-26AD5E LC-26AD5S LC-32AD5E LC-32AD5S

Press on the TV. The indicator on the TV changes from red to green. Standby mode Press on the remote control unit when the TV is on. The TV enters standby mode and the image on the screen disappears. The indicator on the TV changes from green to red. You can turn the TV on by pressing on the remote control unit from standby mode. Weak electric power is still consumed even when is turned off. To completely turn off the TV, press on the TV. Display status indicator Off Power off Red The TV is in standby mode. Green The TV is on. Orange The TV screen is off and a Timer event has begun. NOTE If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. In DTV input mode, if the power is turned off immediately after a setting change from the menu screen, the new setting or channel information may not be memorised. Initial auto installation When the TV powers on for the first time after purchase, the initial auto installation is invoked. You can automatically set language, country and channels in successive operations. NOTE The initial auto installation functions only once. If the initial auto installation is not completed, (ex: When the power shut down, etc.), try First Installation from the Setup menu. (See page 14.) The initial auto installation can be stopped by pressing MENU or END. 1 Setting the on-screen display language ① Press ▲/▼/◀/▶ to select the desired language listed from “First installation (Language)”. ② Press OK to enter the setting. • • • • • • • • • • 2 Setting your country or area Press ◀/▶ to select your country or area listed from “First installation (Country)”. You can change “Colour system” and “Sound system” only when “Other count.” is selected in “Country”. • 3 Setting the Automatic search ① Press ▲/▼ to select “Start search”. ② Press OK to enter the setting. The programme auto search starts at the same time. • You do not need to do anything during the auto search. The setup menu disappears and you can watch the programme on channel 1. NOTE With “Automatic search” of “First installation”, digital broadcasts are scanned after scanning analogue broadcasts. If you want to operate the digital mode first, press END and then press DTV/TV. Follow the procedures in “Installation” on page 23. You can select a language from the Setup menu. Select from 13 languages. (English, Spanish, German, French, Italian, Swedish, Dutch, Russian, Portuguese, Turkish, Greek, Finnish, Polish) You can select a country from the Setup menu. Select from 16 countries. (Austria, Belgium, France, Germany, Netherlands, Italy, Spain, Switzerland, UK, Poland, Russia, Czech Republic, Hungary, Slovenia, Sweden, Other country) If you want to reconfigure the country setting, for instance after moving to another country, conduct “First installation” from the Analogue Menu again. If you select the country as “Germany” in the “First installation” of the Setup menu, the tuner works as follows. After “Auto Scan” is complete, carrier names are sorted in the same order of the “Channel Sort Table List (TV, Radio)”. Sorting is accomplished by checking whether the service name correspond to the “Received Service Name” of the “Channel Sort Table List”. Received carrier names are not changed to match the “Short Service Name”. The channel position moves up, if the service is not found after the “Auto Scan” is finished. A carrier that is not in the “Channel Sort Table List” will be positioned at the bottom of the sorted list. If the same service name is duplicated, the tuner selects the stronger signal, sorts it and places it in the list. The weaker signal listing is placed at the bottom of the list. TV and Radio presetting is done separately so LCN numbers are not duplicated between the two. If you select the Country as “Sweden” in the “First installation” of the Setup menu, tuner works as follows When there is a Channel List in the data after Auto Scan, Channel Type Selection Menu will be displayed and available to set Channel List Type. Select the Channel List Type by pressing ◀/▶ and press OK. • • • • • • • • • • • Quick guide TV (Front view) Remote control sensor (Standby/On) indicator

Setting the input source 1 Press on the remote control unit or TV. The “Input source” menu displays. • 2 Press ▲/▼ to select the desired source, and then press OK. Input source TV EXT1 EXT2 EXT3 EXT4 EXT5 EXT6 EXT7 NOTE EXT7: for LC-26AD5E, LC-26AD5S, LC-32AD5E, LC- 32AD5S only. The cables marked with * are commercially available items. Connection examples are based on LC-26AD5E, LC- 26AD5S, LC-32AD5E and LC-32AD5S. For LC-20AD5E, LC-20AD5S, please see “TV (Top/Rear view)” on page 7 for details. Connecting a VCR You can use the EXT 1 or 2 terminals when connecting a VCR and other audiovisual equipment. • • • NOTE TV-OUT from EXT 2 is not outputted when EXT 4 (COMPOMENT), EXT 5 (HDMI), EXT 6 (HDMI), EXT 7 (PC) or DTV is selected as the input. Connecting a game console or camcorder A game console, camcorder and some other audiovisual equipment are conveniently connected using the EXT 3 terminals. • NOTE EXT 3: The S-VIDEO terminal has priority over the VIDEO terminal. • Connecting a DVD player You can use the EXT 2, 3, 4, 5 (HDMI) or 6 (HDMI) terminals when connecting to a DVD player and other audiovisual equipment. NOTE EXT 3: The S-VIDEO terminal has priority over the VIDEO terminal. • NOTE For LC-20AD5E, LC-20AD5S: EXT6 is for connecting a PC (see page 10). When connecting an HDMI-DVI conversion adapter/ cable to the HDMI terminal, the image may not come in clearly. For LC-26AD5E, LC-26AD5S, LC-32AD5E, LC-32AD5S: Audio input is shared with EXT5 and EXT7. For LC-20AD5E, LC-20AD5S: Audio input is shared with EXT5 and EXT6. • • • • VIDEO S-VIDEO L-AUDIO-R AV OUTPUT VIDEO S-VIDEO L-AUDIO-R AV OUTPUT Y PB (CB) P L-AUDIO-R R (CR) COMPONENT AUDIO R/L SCART cable* SCART cable* EXT 1 or 2 VCR Decoder AUDIO cable* S-video cable* or Composite video cable* EXT 3 Game console Camcorder AUDIO cable* S-video cable* or Composite video cable* EXT 3 DVD player Component cable* ø 3.5 mm stereo minijack cable* DVD player EXT 4 DVD player HDMI cable* EXT 5 or EXT 6 When using an HDMI-DVI conversion adapter/cable, input the Audio signal here. AUDIO cable*

Connecting a decoder You can use the EXT 1 terminal when connecting a decoder and other audiovisual equipment. NOTE Do not connect the decoder to the EXT 2 terminal. Connecting a PC Use the EXT 7 terminals to connect a PC. • NOTE For LC-20AD5E, LC-20AD5S: EXT6 is for connecting a PC. The PC input terminals are DDC1/2B-compatible. Refer to page 30 for a list of PC signals compatible with the TV. Macintosh adaptor may be required for use for some Macintosh computers. When connecting to a PC, the correct input signal type is automatically detected. For LC-26AD5E, LC-26AD5S, LC-32AD5E, LC-32AD5S: Audio input is shared with EXT5 and EXT7. For LC-20AD5E, LC-20AD5S: Audio input is shared with EXT5 and EXT6. • • • • • • • SCART cable* EXT 1 Decoder PC PC EXT 7 EXT 7 ø 3.5 mm stereo minijack cable* ø 3.5 mm stereo minijack cable* RGB/DVI conversion cable* RGB cable*

Backlight [ +8 ] － + Contrast [ 50 ] － + Brightness [ 0 ] － + Colour [ +4 ] － + Tint [ 0 ] Sharpness [ +4 ] － + Black Film mode Colour temp. Reset :Select :Back :Exit MENU END Picture Audio Setup Option Menu operations Menu operation buttons Use the following buttons on the remote control unit to operate the menu. MENU: Press to open the menu screen or return to the previous step. ▲/▼/◀/▶: Press to select a desired item on the screen or adjust a selected item. OK: Press to complete the setting. END: Press to close the menu screen. On-Screen Display Example ① Picture menu To adjust the picture settings. • ② Audio menu To adjust the audio settings. • ③ Setup menu To set up TV channels, select the language displayed on-screen and other settings. • ④ Option menu To customize various features. • ⑤ Navigation buttons To navigate within the Menu screen. • NOTE The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. • ① ② ③ ④ ⑤

① Press MENU and the MENU screen displays. ② Press ◀/▶ to select the desired menu. ③ Press ▲/▼ to select the desired menu item, and then press OK (Example: AV mode, Film mode, etc.). AV mode [ DYNAMIC ] Backlight [ +8 ] － + Contrast [ 50 ] － + Brightness [ 0 ] － + Colour [ +4 ] － + Tint [ 0 ] Sharpness [ +4 ] － + Black Film mode Colour temp. Reset Picture ④ Press ▲/▼ to select the desired item, and then press OK. Select option DYNAMIC STANDARD SOFT ECO USER Menu Operation: B ① Press MENU and the MENU screen displays. ② Press ◀/▶ to select the desired menu. ③ Press ▲/▼ to select the desired menu item (Example: Backlight, Contrast, etc.). ④ Press ◀/▶ to adjust the item to your desired position. AV mode [ DYNAMIC ] Backlight [ +8 ] － + Contrast [ 50 ] － + Brightness [ 0 ] － + Colour [ +4 ] － + Tint [ 0 ] Sharpness [ +4 ] － + Black Film mode Colour temp. Reset Picture Picture adjustments Menu Operation: B (page 12) Adjust the picture to your prefer­ence with the following picture settings. Adjustment items for AV source Selectable items ◀ button ▶ button Backlight The screen dims The screen brightens Contrast For less contrast For more contrast Brightness For less brightness For more brightness Colour For less colour intensity For more colour intensity Tint Skin tones become purplish Skin tones become greenish Sharpness For less sharpness For more sharpness Adjustment items for PC source Selectable items Description Backlight To adjust the screen brightness for improved picture clarity. Contrast To adjust the contrast of PC Monitor screen. Brightness To adjust the brightness of PC Monitor screen. V-Pos. To adjust the vertical position of the image on the PC Monitor screen. Each video standard will require a different value for this setting. H-Pos. To adjust the horizontal position of the image on the PC Monitor screen. Each video standard will require a different value for this setting. Clock To minimize any vertical bars or stripes visible on the screen background. Phase This must be adjusted after the frequency has been set to optimize picture quality. Red Adjust red colour intensity. Green Adjust green colour intensity. Blue Adjust blue colour intensity. Select “Reset” to reset all adjustment items to the factory preset values. • AV mode [ DYNAMIC ] Backlight [ +8 ] － + Contrast [ 50 ] － + Brightness [ 0 ] － + Colour [ +4 ] － + Tint [ 0 ] Sharpness [ +4 ] － + Black Film mode Colour temp. Reset Picture

Menu Operation: A (page 12) You can make various picture mode settings. Selectable items Description AV mode DYNAMIC*1 For a clear-cut image emphasising high contrast for sports viewing. STANDARD*1 For a highly defined image in a normally bright room. SOFT*1 Creates a softer image. ECO*1 Reduces power consumption. USER Allows the user to customise settings as desired. You can set the mode for each input source. Black On For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image. Off Film mode On Automatically detect a film- based source (originally encoded at 24/25 frames/ second, depending on the vertical frequency), analyses it then recreates each still film frame for high-definition picture quality. Off Colour temp.*2 Adjust the colour temperature to give the best white image. High White with bluish tone Middle Natural tone Low White with reddish tone XGA mode*3 1024×768 When you select the XGA mode on the PC, you can select from the three resolutions. 1280×768 1360×768 *1 You can adjust the factory preset parameters given in “STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The parameters chosen affect each of the input sources. *2 Colour temp. setting also can be made in PC mode. *3 This item is visible only when TV is PC mode. Select “Reset” to reset each adjustment item in AV mode to the factory preset values. • Audio menu Audio adjustments Menu Operation: B (page 12) You can adjust the sound quality to your preference with the following settings. Selectable items ◀ button ▶ button Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio from the right speaker Decrease audio from the left speaker Select “Reset” to reset all adjustment items to the factory preset values. Audio Mode Settings Menu Operation: A (page 12) Selectable items Description Loudsp.*1 sound Stereo This function changes the sound mode. (See page 6.) Mono Sound 1 Sound 2 Sound 1+2 Nicam Auto vol. On Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. The Automatic Volume Control (Auto vol.) solves this problem and equalises the volume levels. Off Surround On Surround function allows you to enjoy realistic “live” sound. Off Clear voice On This function emphasises speech voice against the background noise for more intelligibility. It is not recommended for music sources. Off HDMI1/ HDMI2*2 HDMI When you connect the HDMI device to the TV, select this setting. DVI When you connect the DVI device to the TV with analog audio cords, select this setting. *1 This item is visible only when TV is TV mode. *2 LC-20AD5E, LC-20AD5S: HDMI only. Select “Reset” to reset all adjustment items to the factory preset values. • • Treble [ 0 ] － + Bass [ 0 ] － + Balance [ 0 ] L R Loudsp . sound Auto vol . Surround Clear voice HDMI1 HDMI2 Reset Audio

The sound output modes differ depending on whether or not a NICAM or A2 stereo signal is received. (See page 6.) For the “Auto vol.” setting Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. The Automatic Volume Control (Auto vol.) solves this problem and equalises the volume levels. For the “Clear voice” setting This function emphasises speech voice against the background noise for more intelligibility. It is not recommended for music sources. For “HDMI” setting Refer to your external equipment operation manual for the signal type. When connecting an HDMI-DVI conversion adapter/ cable to the HDMI terminal, the image may not come in clearly. • • • • • Setup menu Programmes First installation Child lock 4:3 mode EXT connections Language Setup Setup Settings Menu Operation: A (page 12) Selectable items Choice/Description Programmes*1*2 See page 15. First installation*1*2 See page 8. Child lock See page 16. 4:3 mode See page 17. EXT connections It is possible to manually adjust various settings for connections with external devices on the “EXT connections” screen. Select the appropriate signal type and colour standard for the signals from the video equipment connected to the EXT1, EXT2 or EXT3 terminal. EXT1 EXT2 EXT3 (Y/C) EXT3 (CVBS) Signal type*3 Press ◀/▶ to select option. CVBS, RGB, Y/C: To select the signal type of external equipment. Colour system Press ◀/▶ to select option. Auto, PAL, SECAM, NTSC4.43, NTSC3.58, PAL60 Language The language for the on-screen display can be selected from English, Spanish, German, French, Italian, Swedish, Dutch, Russian, Portuguese, Turkish, Greek, Finnish, and Polish. *1 “Programmes” or “First installation” can be set when the TV is TV mode. *2 If you have defined a PIN on the “Child lock” screen, the PIN input screen is displayed. Input the four-digit PIN (0–9) first. (See page 16.) *3 This item is visible only when “EXT1” or “EXT2” is selected for the “EXT connections” setting. NOTE EXT connections: If no (colour) image is displayed, try to change to a different signal type. Switching between AV input signals may be slow, depending on the settings in “Colour system”. If you want to speed up signal switching, select “Auto” in “Colour system” to the current reception colour system. • •

Selectable items Choice/ Value range Description Channel 0–99 The channel changes to the higher or lower channel. Frequency 42.00 – 863.25 (MHz) Receivable frequencies depending on TV norm, installation site, and range. Colour system Auto, PAL, SECAM Colour norm Sound system Auto, B/G, I, D/K, L/L’ TV norm Name Alphabets, numerical values (e.g. t, 7, etc.) Programme name (up to 5 characters). Press ◀/▶ to select which character will be changed. Press ▲/▼ to change the selected character. Press OK to accept the input name. Skip On Off The channel numbers set with Skip are indicated in gray. Sort Press ▲/▼/◀/▶ to select the desired programme, and press OK to sort. When OK is pressed, the Move mode is activated. Press ▲/▼ to move the currently marked programme to the desired programme position. When the channel has moved to the desired position, all the preceding/subsequent channel position will go up/down. Press OK to exit the Move mode. • Erase Press ▲/▼/◀/▶ to select the programme to be erased, and press OK. All the subsequent programmes move up. • NOTE Depending on the settings in the colour system of the channels, switching between channels may be slow. If you want to speed up channel switching, switch “Auto” in “Colour system” to the current reception system (PAL or SECAM). • Programmes This section describes how to set up analogue TV channels manually. 1 Press MENU to display the Menu screen. 2 Press ◀/▶ to select “Setup”. 3 Press ▲/▼ to select “Programmes”, and press OK. 4 Press ▲/▼ to select the desired item, and press OK. 5 Press ▲/▼/◀/▶ to select the desired option, and press OK. 6 Press END to exit. Automatic search Perform the procedure above to search for and store new TV programmes after the First Installation routine. Selectable items Choice/Description Country Select your country or area from the displayed items. Colour system Auto, PAL, SECAM Sound system Auto, B/G, I, D/K, L/L’ Start search Start Automatic search. NOTE You can change “Colour system” and “Sound system” only when “Other count.” is selected in “Country”. See page 8 for details on the search process. • • TV only

DISENGAGING ADVANCED CHILD LOCK (TV)”. The Child lock function blocks the viewing of any channels and prevents access to “Programmes”, “First installation”, and “Reset TV setting” screens. To use this function, you need to define your PIN (Personal Identification Number) first. [1] Defining a PIN 1 Press MENU to display the Menu screen. 2 Press ◀/▶ to select “Setup”. 3 Press ▲/▼ to select “Child lock”, and press OK to display the PIN input screen. 4 Input the desired four-digit PIN (e.g. 1234) with 0–9. P l e a s e d e f i n e y o u r P I N 1 2 3 4 NOTE Be sure to make a note of your PIN before pressing OK. The PIN will not be set if MENU or END is pressed before the fourth digit has been input. • • 5 Press OK to accept the input PIN. 6 Press END to exit. [2] Setting a Child Lock There are two different ways of activating a Child lock: General child lock for all programmes Programme-position-related child lock To set a Child Lock for all programmes 1 Perform steps 1 to 3 in [1] Defining a PIN to display the PIN input screen. 2 Input your four-digit PIN (e.g. 1234) with 0–9. P l e a s e i n p u t y o u r P I N ? ? ? ? When the PIN is correctly input, the “Child lock” screen is displayed. • 3 Press ▲/▼ to select “For all programmes”, and press OK. F o r a l l p r o g r a m m e s F o r i n d i v i d u a l p r o g . o n l y C h a n g e P I N C a n c e l P I N 4 Press ▲/▼ to select “Yes”, and press OK. The lock remains effective until “No” is selected. • 5 Press END to exit. • • 1. 2. To set a Child Lock for individual programmes 1 Perform steps 1 and 2 in [2] Setting a Child Lock to display the “Child lock” screen. 2 Press ▲/▼ to select “For individual prog. only”, and press OK. F o r a l l p r o g r a m m e s F o r i n d i v i d u a l p r o g . o n l y C h a n g e P I N C a n c e l P I N 3 Press ▲/▼/◀/▶ to select the desired programme. 4 Press OK to lock the programme. The locked programme is displayed in red. NOTE To unlock the programme, select the locked programme, and press OK. The Child lock remains effective until it is cancelled. • • • 5 Press END to exit. [3] Changing/Cancelling a PIN To change a PIN 1 Perform steps 1 and 2 in [2] Setting a Child Lock to display the “Child lock” screen. 2 Press ▲/▼ to select “Change PIN”, and press OK. F o r a l l p r o g r a m m e s F o r i n d i v i d u a l p r o g . o n l y C h a n g e P I N C a n c e l P I N 3 Input the new four-digit PIN (e.g. 5678) with 0–9, and press OK. 4 Press END to exit. To cancel a PIN 1 In step 2 above, press ▲/▼ to select “Cancel PIN”, and press OK. 2 Press ▲/▼ to select “Yes”, and press OK. [4] Temporarily cancelling the Child Lock setting You can view a programme for which a Child lock has been set by temporarily cancelling the Child lock setting. Perform the procedure below to input your PIN and cancel the Child lock if you are prompted to do so. When the PIN input screen is displayed, input your PIN with 0–9. The normal screen appears when the PIN is correctly input. • P l e a s e i n p u t y o u r P I N ? ? ? ? Menu operations

No operation off Blue screen Rec screen status Reset TV setting Option Option Settings Menu Operation: A (page 12) Selectable items Description Power management*1 On If there is no signal input for 8 minutes, the TV enters the standby mode. Even if you start using the PC and the signal inputs again, the TV stays in standby mode. The TV turns on again by pressing on the remote control unit. (See page 8.) • • • Off Sleep timer*2 Off You can set “Sleep timer” to automatically turn off the LCD TV set. 30 min 60 min 90 min 120 min DNR High Produce a clearer image. Middle Low Off No signal off On You can set the power to automatically turn off if there is no signal for 5 minutes. Off No operation off On When set to “On” the TV will automatically enter the standby mode if no operations are performed for 3 hours. Five minutes before the TV enters standby mode, the remaining time displays every minute. • Off Blue screen On You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent when TV is TV mode. Off Rec screen status On This function determines whether the TV screen switches on or not when a programmed timer setting begins. Off Reset TV setting*3 Yes If you select “Yes”, the TV turns off. All parameters settings are reset to the factory settings and tuning data will be lost. No *1 This item is visible only when TV is PC mode. *2 The status display appears by pressing SLEEP. *3 If you have defined a PIN on the “Child lock” screen, the PIN input screen is displayed. Input the four-digit PIN (0–9) first. (See page 16.) 4:3 mode Menu Operation: A (page 12) The WSS signal has 4:3 auto-switching that allows you to select between Normal and Panorama. Selectable items Description Normal Normal range keeping 4:3 or 16:9 aspect ratio Panorama Wide image without side bars WSS signal Wide screen 4:3 mode “Panorama” 4:3 mode “Normal”

size varies with the type of signal received. Selectable items (for SD (Standard) signal) Description Auto WSS allows a television to switch automatically among the different screen formats. Normal For 4:3 “standard” pictures. A side bar appears on each side. Panorama In this mode the picture is progressively stretched toward each side of the screen. Full For 16:9 squeeze pictures. Cinema 16:9 For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes. NOTE When receiving a High Definition (HD) signal, the screen format is set to “Full”. Display with the Overscan image. Crop all sides of screen. Manual Selection 1 Press . Each time pressed this button, you can change the screen format. • Auto Selection If you select the screen format to “Auto” by pressing button, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information. 4:3 mode menu To set the type of the wide screen, select “Normal” or “Panorama” in the 4:3 mode menu. (See page 17.) 4:3 mode set to “Normal” 4:3 mode set to “Panorama” NOTE If the signal contains no WSS information, Auto Selection will not function even when the screen format is set to “Auto”. • • WIDE MODE You can select the picture size. You can freeze a motion picture on the screen. 1 Press . Each time pressed this button, you can change the screen format. • NOTE Connect the PC before making adjustments. (See page 10.) Selectable picture size may vary with input signal type. EXAMPLE Normal Full Selectable items Description Normal Keeps the original aspect ratio in a full screen display. Full An image fully fills the screen. NOTE If you set the resolution to “1280 x 768” or “1360 x 768” in the XGA mode menu and a WXGA signal is received, the image is displayed dot by dot while being received, will be normal screen, and a black band is attached on both sides of the screen. Still image You can freeze a motion picture on the screen. 1 Press . 2 Press again to exit still image. NOTE When this function is not available, “No still image display available.” will display. The still image automatically goes out after 30 minutes. • • • • • TV/DTV/AV only PC only

Colour (Red/ Green/Yellow/ Blue) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (Red/Green/Yellow/Blue) on the remote control unit. 0–9 Directly select any Teletext page from 100 to 899 by using 0–9. (Top/ Bottom/Full) Switch the Teletext image to Top, Bottom or Full. (Reveal hidden Teletext) Reveal or hide hidden information such as an answer to a quiz. (Hold) Stop updating Teletext pages automatically or release the hold mode. (Subtitle for Teletext) Display the subtitle or exit the subtitle screen. Subtitle will not be displayed when the service does not contain the subtitle information. • (Subpage) Reveal or hide subpages. Red button: Move to the previous subpage. Green button: Move to the following subpage. These two buttons are shown on the screen by the signs − and +. • • • OK Display the Index page. Useful features Using the Programme Table The Programme table shows a list of all receivable programmes. They are located in channels 1 to 99. To select the desired programme 1 Press OK to display the Programme table. 2 Press ▲/▼/◀/▶ to select the desired programme. To display the next or previous list of the Programme table, press ▲/▼ when the cursor is at a programme in the lower-right or upper-left position, or press ◀/▶ when the cursor is at a programme in the right or left column. • 3 Press OK to display the selected programme. Teletext function What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning on and off Teletext 1 Select a TV channel or external input source providing the Teletext programme. 2 Press to display the Teletext. 3 Press again to display the Teletext and normal image at the same time on the screen. Each time you press , the screen switches as shown below. • TELETEXT TELETEXT DATA* * May appear in DTV input mode. If you select a programme with no Teletext signal, “No teletext transmission” displays. The same message displays during other modes if no Teletext signal is available. • •

DTV menu operation buttons Use the following buttons on the remote control unit to operate the DTV Menu. DTV/TV: Switch between analogue TV and DTV mode. 0 - 9: Aside from direct channel entry, each of the 1 - 8 numeric buttons have a unique function assigned in the Channel Organizer screen. DTV/RADIO: Press to switch between DTV and RADIO mode. DTV MENU: Press to open the DTV Menu screen or return to the previous step. ▲/▼/◀/▶: Press to select a desired item on the screen or adjust a selected item. OK: Press to go to the next step or complete the setting. END: Press to exit the DTV Menu screen. Colour: Each of the coloured buttons have a unique function assigned in the menu screen. DTV On-Screen Display Example ① ② ③ ④ ⑤ ⑥ ⑦ ① Language Setup To customise the language preference for Menu, Audio, Subtitle and Digital Service application. • ② Channel Organizer To configure various settings for each service. These include: Fav (Favourite), Lock, Skip, Go To, Delete, Rename, Move, Move To and View functions. • ③ Installation To scan all services available in your area, or to Rename/Delete/Rescan the selected carrier. • ④ System Configuration To configure On-Screen Display and Password Setup settings. If the broadcast contains the Time zone region, you can select “Time zone” menu on “System Configuration” menu and you can set the Time zone. • • ⑤ Technical Information To display the current Version of the Hardware and Software. • ⑥ Common Interface To display the current Common Interface details. • ⑦ Navigation buttons To navigate within the DTV Menu screen. • DTV common operations DTV common menu operation ① Press DTV/TV to access the DTV mode. ② Press DTV MENU and the DTV Menu screen displays. ③ Press ▲/▼/◀/▶ to select the desired menu, and then press OK. From this point, menu operations differ depending on the item you are going to adjust. See the respective section of the menu operation. Press DTV/RADIO to switch between DTV and Radio mode. • •

In some cases you may be prompted to enter characters. See below for details. Sample Alpha Numerical Character Set screen DTV menu operations ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 ; : < _ > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ ` = a b c d e f g h i j k l m n o p q r s t u v w x y z SAT.1 Rename END Select Navigate OK ① Input area ② Character select area ③ YELLOW (Select) button Press to move between the input area and character select area. ④ ▲/▼/◀/▶ button Press to move the cursor. ⑤ OK button While in the input area: Confirms the new name. Once OK is pressed to confirm, a confirmation message displays. Press ◀/▶ to select “Yes”, and then press OK. While in the character select area: Confirms the input of a character. ⑥ END button Press to exit the DTV Menu screen. Language Setup Select language settings for Menu, Audio or Subtitle (if a programme is broadcast in more than one language) and Digital Service. 1 Press OK while the cursor is on “Language Setup”. 2 Press ▲/▼ to select “Menu Language”, “Pref. Audio Language”, “Pref. Subtitle Language” or “Pref. Digital Service Language”. If you have already selected a language during “Initial auto installation” (see page 8) or on the “First installation” menu (see page 14), “Menu Language” is automatically set to the one selected. • Language Setup Menu Language English Pref. Audio Language English Pref. Subtitle Language English Pref. Digital Service Language English END Navigate OK Available language list * Languages available only for Digital Service 3 Press ◀/▶ to select a desired language for each item. 4 Press END or OK. NOTE See page 14 to change the language displayed on- screen. See page 29 to change the subtitle language. See page 28 for details on the Digital Service. If “Sweden” was selected on the “First installation (Country)” screen, two languages are displayed for each item and the first selected language has priority. The language output depends on the languages contained in the broadcast. • • • • Dutch Polish English Portuguese Finnish Russian French Spanish German Swedish Greek Turkish Italian Welsh* Gaelic* Channel Organizer Configure various settings for each service. Press the preassigned 1 - 8 numeric buttons to access each of the functions explained below. Press OK while the cursor is on “Channel Organizer” in the Main menu. Sample Channel Organizer screen 002 BBC News 004 BBC ONE 005 BBC TWO 006 BBC THREE 008 CBBC S.No Service Name Fav Lock Skip Del Move 1. Fav 2. Lock 3. Skip 4. Go To 5. Delete 6. Rename 7. Move 8. Move To OK. View Channel Organizer TV 0..9 Navigate RADIO END OK D.MENU NOTE The picture window shows a blank image if Radio services are listed. • ③ ⑤ ⑥ ① ② ④

Fav (Favourite) Assign services to four different favourite groups. 1 Press ▲/▼ to select the desired service. 2 Press 1 on the remote control. A selection box displays. 3 Press ▲/▼ to register the selected service to any of the four favourite groups (None, Fav1 ... Fav4) and then press OK. An icon displays indicating the favourite status. S.No Service Name Fav Lock Skip Del Move 1. Fav 2. Lock 3. Skip 4. Go To 5. Delete 6. Rename 7. Move 8. Move To OK. View Channel Organizer TV None Fav1 Fav2 Fav3 Fav4 002 BBC News 004 BBC ONE 005 BBC TWO 006 BBC THREE 008 CBBC 0..9 Navigate RADIO END OK D.MENU 4 Press DTV MENU. 5 Now you can easily select your favourite service from the Channel List. (See page 28.) NOTE You cannot register the same service to two different favourite groups. Lock When the service is locked, you must enter your PIN whenever you tune to the service. 1 Press ▲/▼ to select the desired service. 2 Press 2 on the remote control. If you already set the PIN, enter it here. If not, enter the factory preset PIN “0000”. An icon displays indicating the service is locked. Pressing 2 will turn the lock icon on and off. (PIN entry is required.) • 3 Press DTV MENU. NOTE See page 25 for setting the PIN. • • Skip Services that are set to skip will not be picked up when pressing P ( / ). 1 Press ▲/▼ to select the desired service. 2 Press 3 on the remote control. An icon displays indicating the service to be skipped. Pressing 3 will turn the skip icon on and off. • 3 Press DTV MENU. NOTE To view services that are set to be skipped, use 0 - 9 numeric buttons or select from the Channel List. Go To Use this function to jump to the specific service in one step. This is useful when there are many services displayed on screen to scroll through. 1 Press 4 on the remote control. Now you can change the service number on the left side of the screen. 2 Enter the number using 0 - 9 numeric buttons, and then press OK. The highlight moves to the selected service. Delete Delete the selected service(s) from the memory. 1 Press ▲/▼ to select the desired service. 2 Press 5 on the remote control. An icon displays indicating the service to be deleted. Pressing 5 will turn the delete icon on and off. • 3 Press DTV MENU. A confirmation message displays. • 4 Press ◀/▶ to select “Yes”, and then press OK. Rename Change individual service names. 1 Press ▲/▼ to select the desired service. 2 Press 6 on the remote control. A character set screen displays. 3 Enter new name for the service. See page 21 for operations using the character set screen. 4 Press OK. A confirmation message displays. • 5 Press ◀/▶ to select “Yes”, and then press OK. •

settings after conducting Initial auto installation on page 8. Auto Scan The TV automatically detects and stores all available services in your area. 1 Press ◀/▶ to select “Installation”. 2 Press ▲/▼ to select “Auto Scan”, and then press OK. A confirmation message displays. • 3 Press ◀/▶ to select “Yes”, and then press OK. The TV starts scanning all available DTV and radio services in your area. • NOTE To cancel the scan in progress, press END. Manual Scan Manually add a new carrier by entering the desired carrier number or frequency band. 1 Press ◀/▶ to select “Installation”. 2 Press ▲/▼ to select “Manual Scan”, and then press OK. Manual Scan Channel list Ch-5 Frequency (kHz) 177500 0..9 Navigate OK END 3 Press ▲/▼ to select “Channel list”, then ◀/▶ to enter the carrier number, and then press OK. The frequency of the selected carrier in the below cell changes correspondingly. • 4 After the scan is complete, the screen shows all available services for the selected range. A confirmation message displays. • 5 Press ◀/▶ to select “Yes”, and then press OK. NOTE If “Sweden” is selected on the “First installation (Country)” screen, the “Frequency (kHz)” cannot be used. When the Country is set to Sweden in the “First installation (Country)” When there is a Channel List in the data after Auto Scan or Manual Scan, Channel Type Selection Menu will be displayed and available to set Channel List Type. Select the Channel List Type by pressing ◀/▶ and press OK. • • Move Sort the order of the selected service by moving the service position. 1 Press ▲/▼ to select the desired service. 2 Press 7 on the remote control. An icon displays indicating the service to be moved. Pressing 7 will turn the move icon on and off. • 3 Move the selected service to the desired position using ▲/▼, and then press OK to register the change. Move To Sort the order of the selected service by modifying the service number. 1 Press ▲/▼ to select the desired service. 2 Press 8 on the remote control. Now you can change the service number on the left side of the screen. 3 Enter the number using 0 - 9 numeric buttons, and then press OK. The service moves to the new position. NOTE If on the “First installation (Country)” screen “UK” is selected, “Move To” cannot be used in U.K. View Change to the service shown in the picture window. 1 Press ▲/▼ to select the desired service. 2 Press OK on the remote control. The image shown in the picture window changes. • 3 Press END to exit the Channel Organizer screen to view the image in full screen. • DTV menu operations

settings. Display Setup The On-Screen Display appearance and the position/ duration of the service banner information can be customised. 1 Press ◀/▶ to select “System Configuration”. 2 Press ▲/▼ to select “Display Setup”, and then press OK. Display Setup END Navigate OK Banner timeout 4 Secs Banner position Bottom Display Transparency 10% 3 Press ▲/▼ to select the desired item. 4 Press ◀/▶ to select the desired parameter, and then press END. OSD Setup items Selectable items Description Banner timeout 1 Sec/2 Secs/ ... 7 Secs Select how long the service banner information appears on screen. Banner position Top/Bottom Select whether the service banner information appears on top or bottom of the screen. Display Transparency None/10%/20%/ ...50% Select the desired level of On-Screen Display transparency. DTV menu operations Carrier Setup This is provided for you to rename (label), delete, or re-scan carriers. “Carrier” in this context refers to a service station that provides a set of individual services. 1 Press ◀/▶ to select “Installation”. 2 Press ▲/▼ to select “Carrier Setup”, and then press OK. 001 DVB-T 16QAM 184500 03 01 002 DVB-T 16QAM 506000 03 01 003 DVB-T 64QAM 842000 05 00 FEC :7/8 FFT : 2k Frequency (kHz): 506000 QAM :16 GI : 1/32 S.No Carrier Name Frequency TV Radio Carrier Setup END Navigate OK Rename Delete Rescan ① To rename the selected carrier: Select the carrier, and then press RED (Rename). The character set screen displays. Enter a new name for the carrier. See page 21 for details on using the character set screen. Press OK. A confirmation message displays. Press ◀/▶ to select “Yes”, and then press OK. ② To delete the selected carrier: Select the carrier, and then press GREEN (Delete). An icon displays indicating the carrier to be deleted. Pressing GREEN will turn the delete icon on and off. Press OK. A confirmation message displays. Press ◀/▶ to select “Yes”, and then press OK. ③ To re-scan the selected carrier: Select the carrier, and then press BLUE (Rescan). Re-scanning starts. A confirmation message displays. Press ◀/▶ to select “Yes”, and then press OK. NOTE If “Sweden” is selected on the “First installation (Country)” screen, DATA is displayed on the “Carrier Setup” screen. •

This function allows TV and Radio services to be restricted. It prevents children from watching violent or sexual scenes that may be harmful. 1 Press ◀/▶ to select “System Configuration”. 2 Press ▲/▼ to select “Password Setup”, and then press OK. 3 If you already set the PIN, enter it here. If not, enter the factory preset PIN “0000”. 4 Press ▲/▼ to select “Parental Lock”. 5 Press ◀/▶ to select the desired age/rating (4 ...18/None). Password Setup END Navigate OK Parental Lock None Change password - - - - 6 Press ▲/▼ to select “Change password”. 7 Enter the 4-digit number as a PIN using 0 – 9. 8 Enter the same 4-digit number as in step 7 to confirm. “Successfully updated” displays. • 9 Press END. NOTE To view a locked channel, you must enter a PIN. When you select a locked channel, a PIN prompt message pops up. Enter the 4 digit number using 0–9. As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. See page 34 for resetting the current PIN to the factory preset “0000” if you lose or forget your PIN. Technical Information Check the version information of the digital module and allow it to be upgraded (when available). Version Check the version information of the digital module. 1 Press ◀/▶ to select “Technical Information”. 2 Press ▲/▼ to select “Version”, and then press OK. The hardware and software versions are displayed. • • • • DTV menu operations Software upgrade The software for controlling the built-in DTV decoder can be upgraded when necessary. In Great Britain this can be achieved via an Over Air Download. Preparation Confirm and make a note of the current software version number as in step 2 of Software Version. Manual upgrade 1 Press ◀/▶ to select “Technical Information”. 2 Press ▲/▼ to select “Software upgrade”, and then press OK. The TV checks all carriers if there is a new software available for upgrade. ① If upgrade via Over Air Download is available at the time: A confirmation message appears asking you to accept the upgrade or not. To download now, press ◀/▶ to select “Yes”, and then press OK. After the upgrade is completed, the TV restarts automatically with the new software version installed. To postpone the download, press ◀/▶ to select “No”, and then press OK. Enter the download time for more convenient time as instructed. The software upgrade will not be carried out if there is no new software available at the specified download time. ② If upgrade via Over Air Download is NOT available at the time: A message tells you that there is no software available to be downloaded. 3 Check the new software version number to confirm the successful upgrade. Auto upgrade 1 When you tune to the service that provides the upgrade via Over Air Download, a confirmation message displays. 2 Follow the screen prompts. 3 Check the new software version number to confirm the successful upgrade. NOTE To scan all carriers for upgrade availability, perform the manual upgrade. The software upgrade may take about 30 minutes, but may take longer (up to 1 hour) depending on the signal status. While updating, you can switch to TV or external input mode or enter standby mode using on the remote control unit. CAUTION Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires. • • •

NOTE To view paid TV broadcasting, you need to make a contract with a service provider. Please contact a service provider for details. The Common Interface Module and the CA card are neither supplied nor optional accessories. Leaving your CA card inserted does not affect free to view channels. About The Common Interface Slot (LC-20AD5E, LC-20AD5S only) At the time of purchase a dummy CI card is already loaded into the Common Interface slot. When you are ready to load your CI card, press the button indicated by the arrow and remove the dummy CI card. When you remove your CI card, replace it with the dummy CI card to prevent dust or other material from getting into the Common Interface slot. • • • Dummy CI card Push to eject Common Interface Check the detailed information on the Common Interface module card in use. 1 Press OK while the cursor is on “Common Interface”. The CI module name is displayed. • Cl Module Module Name Top Up TV END OK 2 Press OK to access the CI menu. Detailed information on the CI card in use is displayed. • 3 Press ▲/▼ to select the item, and then press OK. Detailed information on the selected item is displayed. • Inserting a CA card A single DVB Common Interface (CI) slot is provided to allow adoption of a Conditional Access (CA) system by means of a plug-in CA module. Scrambled Broadcasting service can be routed via the CA system. To allow the use of smart-card type CA system, a Conditional Access Module (CAM) is required. This should be obtained along with the CA card at the time of purchase. Please follow the service provider’s instructions to activate the card. When the compatible card is not inserted: ①Select the programme which needs the compatible CA card. The caution screen appears. • ②Insert the compatible CA card. The caution screen disappears and you can view the programme. • CA system supported by Crypto Works Aston CAM VIAccess Nagra Vision Irdeto MR CAM Conditional Access Module CA card C.I. Slot

About EPG With the Electronic Programme Guide (EPG), you can check the schedule of DTV and Radio events, view detailed information about them, tune to an event currently on-air and set a timer for future events. General EPG screen No Event Name No Description 0011 BBC News Sun 20/08/2006 Guide TV Sun 20/08/2006 01:00 Navigate View Info Channels 01:00 01:30 02:00 672_P... 679_V... 671_MNO_10step_0820_... 673_STU_SDTV Moving_... 671_MNO_ 672_PQR_SMPTE Color Bar_... 673_STU_ 679_VWXYZ_Monosco_082... No Event Name BBC News BBC ONE BBC TWO BBC THREE CBBC Page - Page + Prev.Day Next Day RADIO END OK ① Service name ② Event name ③ Picture window ④ Service list Shows the list of all services currently available. As you scroll down the list, the rows in the Event name list on the right will be refreshed correspondingly. • ⑤ Event name list Shows the names of current events in a grid of rows and columns. You can check scheduled event information up to several days ahead, depending on conditions. • Using the EPG 1 Press EPG. Pressing DTV/RADIO will switch between DTV and Radio mode. • 2 Press ▲/▼/◀/▶ to access the desired service or event. The image shown in the picture window changes. In the Service list: ① Press ▲/▼ to scroll the page up/down. Or, ② Press RED (Page −) or GREEN (Page +) to skip to the previous/next page in one step. In the Event name list: ① Press ◀/▶ to scroll the page left/right. Or, ② Press YELLOW (Prev.Day) or BLUE (Next Day) to skip to the previous/next day in one step. • 3 To watch an event currently on-air, press OK. The “ OK ” button of Navigation buttons will be displayed as “ View OK ” when the cursor is selecting an event currently on-air, and other than this will display “ Timer OK ”. The TV will show the image in full screen. Selecting an event that has not yet started will activate the EPG Timer mode instead. • • • NOTE Pressing opens the EPG Description screen that provides more information about the selected event. Press , OK or END to exit. Using the EPG Timer When the Timer is set, the TV automatically tunes to a preset TV event when its on-air time begins. 1 Press EPG. 2 Press ▲/▼/◀/▶ to select the desired event to be preset from the Event name list, and then press OK. Select an event not yet started. A confirmation message displays. • • 3 Press ◀/▶ to select “Yes”, and then press OK. 4 Press RED (Timer mode), and then press ▲/▼ to select the desired parameter (“Once”, “Daily” or “Weekly”), and then press OK. BBC ONE Once 20/08/06 01:05 01:05 Service Name Mode Date Time Duration Event Timer Timer mode Delete Timer Edit Timer Edit Duration Once Daily Weekly END Navigate OK NOTE If using this function for recording, make sure to set the timer of your recording equipment as well. Do not switch channels while recording using this function. This function cannot be set for locked services or when Parental lock applies. (See pages 22 and 25.) Up to 8 events can be preset using the Timer function. You can choose whether or not the screen switches on when the timer event begins. See Rec screen status on page 17. This is so that if you are using the timer to make a recording to your VCR or other device, the TV screen will not switch on unless you want it to. If you are watching another event, an alarm message displays on the screen a few seconds before the preset time. To cancel the preset, select the event to delete, press GREEN (Delete Timer), press ◀/▶ to select “Yes”, and then press OK. An alert message displays when the preset events overlap one another. • • • • • • • • • ① ③ ② ④ ⑤

Viewing a service banner A service banner shows event names, start/end time of event, and other useful information. 1 Press . Service banner 0011 BBC ONE Stereo 4 261_ABC_Mono 01:02:43 17:08 17:38 20/08/2006 Unclassified Age:4 ① Service No. ② Service name ③ Channel group (Favourite) ④ Lock status ⑤ DVB Teletext available ⑥ DVB Subtitle available ⑦ Pay TV ⑧ Audio mode ⑨ Duration graph ⑩ Starting time/Ending time of current programme ⑪ Genre ⑫ Programme name ⑬ Parental rating ⑭ Time and date 2 To display more detailed information, press again. You can verify the signal strength and quality of the selected service here. When the Country setting has been set to Sweden, press once more to display the advanced detailed information. • • Changing the start time of the Event 1 Select the start time of the event to change and press the YELLOW (Edit Timer). 2 Change the start time with ▲/▼ and press OK. NOTE You cannot hasten the start time from the original start time of the Event. You cannot set with the same date and time of another Event. Changing the time duration of the Event 1 Select the time duration of the event to change and press the BLUE (Edit Duration). 2 Change the time duration with ▲/▼ and press OK. Displaying the stored timer events 1 Press EPG twice. You can confirm and edit the stored timer events. • Using the digital channel list Select services by using the Channel list instead of using 0 - 9 numeric buttons or P ( / ). 1 Press OK when no other menu screen is displayed. Channel list TV S.No Services Carrier DVB-T 64QAM Freq 842000 kHz 002 BBC News 004 BBC ONE 005 BBC TWO 006 BBC THREE 008 CBBC Channel group All Navigate RADIO END OK 2 The screen shows the service list in either TV or Radio mode sorted by favourite type (All, Fav1 - 4) as configured in page 22. 3 Press ▲/▼ to select the desired service, and then press OK. The image shown in the picture window changes. • 4 Press END to exit the Channel list to watch the image in full screen. • • Currently tuned service Service shown in picture window ① ② ③④⑤⑥⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭

TEXT to quit Use UP/DOWN and SELECT FULL SCREEN BACK HELP MENU WORLD FOOTBALL 2007 Angola 0-1 Portugal Serb&M 0-1 N’lands Mexico 3-1 Iran England water plea Ballack set to return World Football Interactive News Latest headlines from Germany Using the Digital Service (UK only) Some services bring you programmes with the Digital Service, letting you experience DTV interactively. When provided, the Digital Service will start when you press . Sample Digital Service screen Using the multi audio function Change the audio mode and language for the currently viewed service. 1 Press when no other menu screen is displayed. No. Language Code Multi audio 001 ENG 002 SPA Audio mode Stereo END Navigate OK 2 Press ◀/▶ to select the desired audio mode (Left, Right, L+R, Stereo), and then press ▼ to move down. 3 Press ▲/▼ to select the desired language available for the service, and then press END. NOTE Once you tune to another service or the power is turned off, the setting returns to the parameter set in the Language Setup menu (page 21). Displaying subtitles Set the desired language for the subtitle display and enable/disable the subtitle display. 1 Press when no other menu screen is displayed. Language English Subtitle 2 Press repeatedly to select desired subtitle language in available languages. To turn off the subtitles, select “Off”. • NOTE The subtitle may not be displayed depending on the broadcast. • •

Resolution Horizontal Frequency Vertical Frequency VESA Standard VGA 640 × 480 31.5 kHz 60 Hz  SVGA* 800 × 600 37.9 kHz 60 Hz  XGA 1024 × 768 48.4 kHz 60 Hz  WXGA 1280 × 768 47.7 kHz 60 Hz  48.1 kHz 60 Hz  1360 × 768 47.7 kHz 60 Hz  * We recommend that the output setting from the PC be set to VGA as SVGA will produce less than optimal viewing quality. VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Co., Inc. NOTE This TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the VESA 60Hz standard. Any variations from this standard will result in picture distortions. If you set the resolution to “1280 x 768” or “1360 x 768” in the XGA mode menu and a WXGA signal is received, the image is displayed dot by dot while being received, will be normal screen, and a black band is attached on both sides of the screen. Depending on the graphics card, resolutions of 1360 x 768 may not display correctly. RS-232C port specifications PC Control of the TV When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. Attach an RS-232C cable cross-type (commercially available) to a 9 pin D-sub/MINI-DIN (optional: AN-A1RS) for the connections. NOTE This operation system should be used by a person who is accustomed to using PCs. • • • • • • 9 pin D-sub/MINI-DIN conversion cable (optional: AN-A1RS) RS-232C serial control cable (cross type, commercially available) Communication procedure Send the control commands from the PC via the RS- 232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the next command. Command format Eight ASCII codes + CR C1 C2 C3 C4 P1 P2 P3 P4 Command 4-digits Parameter 4-digits Return code Command 4-digits: Command. The text of four characters. Parameter 4-digits: Parameter 0 – 9, ×, blank, ? Parameter Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that four values are input for the parameter.) When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.) When “?” is input for some commands, the present setting value responds. Response code format Normal response Problem response (communication error or incorrect command) 0 0 5 5 1 0 0 – 3 0 0 0 0 9 0 ? ? ? ? ? O K Return code (0DH) E R R Return code (0DH) Communication conditions Set the RS-232C communications settings on the PC to match the TV’s communications conditions. The TV’s communications settings are as follows: Baud rate: 9,600 bps Data length: 8 bits Parity bit: None Stop bit: 1 bit Flow control: None

Broadcasted rating User‑ adjusted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal  − − − − − − − − − − − − − − Parental      − − − − − − − − − − X-rated                Broadcasted rating User‑ adjusted rating Universal Parental X-rated Universal − − − Parental  − − X-rated   − CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF (STANDBY) INPUT SELECTION A I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) I T V D _ _ _ _ TV (CHANNEL FIXED) I D T V _ _ _ _ DTV (CHANNEL FIXED) I A V D * _ _ _ For LC-26AD5E, LC- 26AD5S, LC-32AD5E, LC-32AD5S: EXT1 to EXT7 (1 to 7) For LC-20AD5E, LC- 20AD5S: EXT1 to EXT6 (1 to 6) I A V D ? ? ? ? For LC-26AD5E, LC- 26AD5S, LC-32AD5E, LC-32AD5S: 1 to 7, ERR (TV/DTV) For LC-20AD5E, LC- 20AD5S: 1 to 6, ERR (TV/DTV) CHANNEL D C C H * * _ _ TV DIRECT CHANNEL (00 to 99) D C C H ? ? ? ? 00 to 99 C H U P _ _ _ _ CHANNEL UP C H D W _ _ _ _ CHANNEL DOWN D T V D * * * _ DTV DIRECT CHANNEL (001 to 999*) D T V D ? ? ? ? 1 to 999* D T U P _ _ _ _ DTV CHANNEL UP D T D W _ _ _ _ DTV CHANNEL DOWN INPUT SELECTION B I N P 1 0 _ _ _ EXT1 (Y/C) I N P 1 1 _ _ _ EXT1 (CVBS) I N P 1 2 _ _ _ EXT1 (RGB) I N P 1 ? ? ? ? 0 to 2 I N P 2 0 _ _ _ EXT2 (Y/C) I N P 2 1 _ _ _ EXT2 (CVBS) I N P 2 2 _ _ _ EXT2 (RGB) I N P 2 ? ? ? ? 0 to 2 I N P 3 0 _ _ _ EXT3 I N P 4 0 _ _ _ EXT4 (COMPONENT) I N P 5 0 _ _ _ EXT5 (HDMI) I N P 6 0 _ _ _ EXT6 (HDMI) (Except LC- 20AD5E, LC-20AD5S) I N P 6 0 _ _ _ EXT6 (RGB) (For LC- 20AD5E, LC-20AD5S) I N P 7 0 _ _ _ EXT7 (RGB) (Except LC- 20AD5E, LC-20AD5S) AV MODE SELECTION A V M D 0 _ _ _ AV MODE SELECTION (TOGGLE) A V M D 1 _ _ _ STANDARD A V M D 2 _ _ _ SOFT A V M D 3 _ _ _ ECO A V M D 4 _ _ _ USER A V M D 5 _ _ _ DYNAMIC A V M D ? ? ? ? 1 to 5 CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS VOLUME V O L M * * _ _ VOLUME (0 -50) V O L M ? ? ? ? 0 to 50 POSITION H P O S * * * _ H-POSITION PC (-30 to +30) H P O S ? ? ? ? PC (-30 to +30) V P O S * * * _ V-POSITION PC (-10 to +10) V P O S ? ? ? ? PC (-10 to +10) C L C K * * * _ CLOCK (0 to 180) C L C K ? ? ? ? 0 to 180 P H S E * * _ _ PHASE (0 to 40) P H S E ? ? ? ? 0 to 40 WIDE MODE W I D E 0 _ _ _ WIDE MODE (TOGGLE) W I D E 1 _ _ _ NORMAL (TV, AV) W I D E 2 _ _ _ ZOOM 14:9 (TV, AV) W I D E 3 _ _ _ PANORAMA (TV, AV) W I D E 4 _ _ _ FULL (TV, AV) W I D E 5 _ _ _ CINEMA 16:9 (TV, AV) W I D E 9 _ _ _ NORMAL (PC) W I D E 1 0 _ _ FULL (PC) W I D E ? ? ? ? 1 to 5, 9 to 10 MUTE M U T E 0 _ _ _ MUTE (TOGGLE) M U T E 1 _ _ _ MUTE ON M U T E 2 _ _ _ MUTE OFF M U T E ? ? ? ? 1 to 2 SURROUND A C D V 0 _ _ _ SURROUND (TOGGLE) A C D V 1 _ _ _ SURROUND ON A C D V 2 _ _ _ SURROUND OFF A C D V ? ? ? ? 1 to 2 AUDIO CHANGE A C H A _ _ _ _ SOUND SELECT (ST/ BILINGUAL/MONO) SLEEP TIMER O F T M 0 _ _ _ OFF O F T M 1 _ _ _ 30 min O F T M 2 _ _ _ 60 min O F T M 3 _ _ _ 90 min O F T M 4 _ _ _ 120 min O F T M ? ? ? ? 0 to 120 TEXT T E X T 0 _ _ _ TELETEXT OFF T E X T 1 _ _ _ TELETEXT CHANGE (TOGGLE) T E X T ? ? ? ? 0 to 1 D C P G * * * _ DIRECT PAGE JUMP (100 to 899) D C P G ? ? ? ? 100 to 899 NOTE If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. * If on the “First installation (Country)” screen “Sweden” is selected, input a 4-digit number 0001 to 9999. • •

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: –20°C to +60°C. • • Problem Possible Solution No power. • Check if you pressed on the TV. (See page 8.) If the indicator on the TV lights up red, press on the remote control unit. Is the AC cord disconnected? (See page 4.) Check if you pressed on the remote control unit. (See page 8.) • • • Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after first turning the power off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes. • Remote control unit does not operate. • Are batteries inserted with polarity (+, −) aligned? (See page 5.) Are batteries worn out? (Replace with new batteries.) Are you using it under strong or fluorescent lighting? Is a fluorescent light illuminating the remote control sensor? • • • • Picture is stretched vertically. • Are wide mode adjustments made correctly? (See page 18.) • Strange colour, light colour, or dark, or colour misalignment. • Adjust the picture tone. (See page 12.) Is the room too bright? The picture may look dark in a room that is too bright. Check the colour system setting. (See page 15.) • • • Power is suddenly turned off. • The unit’s internal temperature has increased. Remove any objects blocking vent or clean. Check the No signal off setting. (See page 17.) Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off. • • • No picture. • Is connection to other components correct? (See page 9.) Is input signal type selected correctly after connection? (See page 14.) Is the correct input source selected? (See page 9.) Is picture adjustment correct? (See page 12.) Is the antenna connected properly? (See page 4.) • • • • • No sound. • Is the volume too low? (See page 6 and 7.) Make sure that headphones are not connected. (See page 7.) Check if you pressed on the remote control unit. (See page 6.) • • • The TV sometimes makes a cracking sound. • This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV’s performance. •

For LC-20AD5E, LC-20AD5S: Audio input is shared with EXT5 and EXT6. As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE Refer to inside back cover for dimensional drawings. • • Item 20” LCD COLOUR TV, Model: LC-20AD5E LC-20AD5S 26” LCD COLOUR TV, Model: LC-26AD5E LC-26AD5S 32” LCD COLOUR TV, Model: LC-32AD5E LC-32AD5S LCD panel 20” Advanced Super View & BLACK TFT LCD 26” Advanced Super View & BLACK TFT LCD 32” BLACK TFT LCD Number of dots 3,147,264 dots (1366 × 768 × 3 dots) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Function TV-Standard Analogue CCIR (B/G, I, D/K, L, L’) Digital DVB-T (2K/8K OFDM) Receiving Channel VHF/UHF E2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch, (Digital: E5-E69ch) CATV Hyper-band, S1–S41ch TV-Tuning System Auto Preset 99 ch, Auto Label, Auto Sort STEREO/BILINGUAL NICAM/A2 Brightness 450 cd/m2 Backlight life 60,000 hours (at Backlight Standard position) Viewing angles H : 176° V : 176° Audio amplifier 2 W × 2 10 W × 2 Speaker 71 mm × 30 mm 122 mm × 41 mm Terminals Rear Antenna input UHF/VHF 75Ω Din type (Analogue & Digital) EXT1 SCART (AV input, Y/C input, RGB input, TV output) EXT2 SCART (AV input/output, Y/C input, RGB input) EXT3 S-VIDEO (Y/C input), RCA pin (AV input) EXT4 COMPONENT (Y/PB (CB)/PR (CR) input), RCA (Audio input) EXT5 HDMI, Ø 3.5 mm jack (Audio input*) EXT6 Ø 3.5 mm jack (Audio input*), 15 pin mini D-sub (PC/ Component) HDMI, Ø 3.5 mm jack (Audio input) EXT7 – Ø 3.5 mm jack (Audio input*), 15 pin mini D-sub (PC/Component) RS-232C 9 pin MINI-DIN male connector C. I. (Common Interface) EN50221, R206001 OUTPUT RCA pin (Audio) Headphones Ø 3.5 mm jack (Audio output) OSD language English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish/Greek/ Russian/Polish Power Requirement AC 220–240 V, 50 Hz Power Consumption 84 W (1.0 W Standby) (Method IEC60107) 155 W (1.0 W Standby) (Method IEC60107) 180 W (1.0 W Standby) (Method IEC60107) Weight 6.5 kg (Display only), 7.3 kg (Display with stand) 11.5 kg (Display only), 13.5 kg (Display with stand) 14.5 kg (Display only), 16.0 kg (Display with stand) Operating temperature 0°C to +40°C No. Part name Part number 1 Wall mount bracket (LC-26AD5E, LC-26AD5S) AN-26AG1 2 Wall mount bracket (LC-32AD5E, LC-32AD5S) AN-37AG2 Optional accessories The listed optional accessories are available for the LCD colour TV. Please purchase them at your nearest shop. Additional optional accessories may be available in near future. When purchasing, please read the newest catalogue for compatibility and check the availability. •

1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. 2. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens. ch. B. Information on Disposal for Business Users 1. In the European Union If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities. For Spain: Please contact the established collection system or your local authority for take-back of your used products. 2. In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal. Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. End of Life Disposal IMPORTANT NOTE ON DISENGAGING ADVANCED CHILD LOCK (TV) If you have forgotten your personal identification number and cannot disengage ADVANCED CHILD LOCK, follow the procedure below. 1. Press MENU to display the Menu screen. 2. Press ◀/▶ to select “Setup”. 3. Press ▲/▼ to select “Child lock”, and press OK. 4. The PIN input menu is displayed. 5. Input “3001” with 0 - 9, and press OK. The Child lock setting menu is displayed. ADVANCED CHILD LOCK will now be disengaged. RESETTING THE PIN (DTV) If you forget the PIN, reset the PIN. 1. Press and hold both − on the TV and press 3 on the remote control simultaneously for a few seconds. The factory preset PIN for DTV is set to “0000”. IMPORTANT NOTE ON RESETTING THE PIN We suggest that you remove the following instruction from the operation manual to prevent children from reading it. As this operation manual is multilingual, we also suggest the same with each language. Keep it in a safe space for future reference.

567.5 663 500 451 49 320.5 293 79 116 243 100 500 100 60 LC-26AD5E, LC-26AD5S 318 522 360 395 36 445.2 251.5 100 32 178 75 103 225 100 LC-20AD5E, LC-20AD5S Unit: mm

Gedruckt in Polen Imprimé en Pologne Stampato in Polonia Gedrukt in Polen Impreso en Polonia J32A0101B 07P05-TH-NO SHARP ELECTRONICS (Europe) GmbH Sonnistraße 3, D-20097 Hamburg, Deutschland Printed on environmentally friendly paper Auf ökologischem Papier gedruckt Imprimé sur papier écologique Stampato su carta ecologica Afgedrukt op ecologisch papier Impreso en papel ecológico J32A0101B SH 07/05 P SHARP ELECTRONICS (Europe) GmbH Sonnistraße 3, D-20097 Hamburg, Deutschland