Sharp MD-MT170E Operation Manual

For the best performance, read this manual carefully. It will guide you in operating your SHARP product. MODEL MD-MT170E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101

Car adaptor (AD-CA20X)
Cassette adaptor (AD-CT14)
Connection cable (for digital recording) (AD-M1DC)
Connection cable (for digital recording) (AD-M2DC) Earphones x 1 AC Adaptor (RADPA8058AWZZ) x 1 Connection Cable (for analogue re- cording) x 1 Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1 Battery Carrying Case x 1
Parts and equipment mentioned in this operation manual other than those detailed above are not included.
The AC adaptor may be different from the one in the drawing.

Special Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Names of Controls and Indicators . . . . . . . . . . . . . . .6 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Power Source Using with the Rechargeable Battery . . . . . . . . . . . 8-9 Using with the AC Adaptor . . . . . . . . . . . . . . . . . . . . .9 Using with the Alkaline Battery . . . . . . . . . . . . . . . . .10
Preparation Inserting a MiniDisc . . . . . . . . . . . . . . . . . . . . . . . . . .11 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Basic Operation Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 Hold Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Page
Useful Features Advanced Playback . . . . . . . . . . . . . . . . . . . . . . . 18-19 Advanced Recording . . . . . . . . . . . . . . . . . . . . . . 20-25 Checking Displays . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Changing Default Settings . . . . . . . . . . . . . . . . . . . . 28
Advanced Features Titling a MiniDisc . . . . . . . . . . . . . . . . . . . . . . . . . 29-31 Editing a Recorded MiniDisc . . . . . . . . . . . . . . . 32-34 Listening through Another System . . . . . . . . . . . . . 35
References Other Features and Caution . . . . . . . . . . . . . . . . . . . 36 MiniDisc System Limitations . . . . . . . . . . . . . . . . . . 37 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43 TERMS OF GUARANTEE . . . . . . . . . . . . . .Back cover

parts. Never remove covers unless qualified to do so. It contains dangerous voltages, always remove the mains plug from the main outlet socket before any service operation or when not in use for a long period.
The AC adaptor supplied with the MD-MT170E must not be used with other equipment.
To prevent fire or shock hazard, do not expose this appliance to dripping or splashing liquids. No objects filled with liquids, such as vases, shall be placed on the apparatus.
Never use an AC adaptor other than the one specified. Otherwise, problems or serious hazards may be cre- ated.
Caution
When recording important selections, make a prelimi- nary test to ensure that the desired material is prop- erly recorded.
SHARP is not liable for damage or loss of your record- ing arising from malfunction of this unit.

may damage the user's hearing. This model complies with the law if used with the correct earphones (model number RPHOH0011AWZZ). If the earphones are damaged in any way, please order using the model number given above.
This product is classified as a CLASS 1 LASER PRODUCT.
Use the Portable MiniDisc Recorder only in accord- ance with the instructions given in this manual and do not attempt to interfere with the interlock switch or make any other adjustment as this may result in expo- sure to hazardous radiation. Laser Diode Properties
Material: GaAIAs
Wavelength: 785 nm
Pulse time: Read mode: 0.8 mW Continuous Write mode: max 10 mW 0.5S min cycle 1.5S Repetition
Notes
Recording and playback of any material may require consent, which SHARP is unable to give. Please refer particularly to the provisions of the Copyright Act 1956, the Dramatic and Musical Performers Protection Act 1958, the Performers Protection Acts 1963 and 1972 and to any subsequent statutory enactments and orders.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC.
US and foreign patents licensed from Dolby Laborato- ries.
The letters in brackets contained in the model number indicate the colour of the product only. Operation and specifications are unaffected.

Names of Controls and Indicators Reference page 1. Battery Case Connection Terminals . . . . . . . . . 10 2. 5 V DC Input Socket . . . . . . . . . . . . . . . . . . . . . . . 9 3. Optical/Line Input Socket . . . . . . . . . . . . . . . . . 12 4. Earphones/Line Output Socket . . . . . . . . . . 16, 35 5. Record/Track Mark Button . . . . . . . . . . . . . . 14, 24 6. Menu/Charge Button . . . . . . . . . . . . . 8, 15, 22, 28 7. Bass/Delete Button . . . . . . . . . . . . . . . . . . . 17, 30 8. Enter/Fast Play/Synchro Button . . . . . . 15, 19, 22 9. Volume/Cursor/Fast Forward/Fast Reverse/ Recording Level/Name Select Button 14, 16, 18, 30 10. Open Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11. Stop/Power Off/Hold Button . . . . . . . . . 15, 16, 17 12. Rechargeable Battery Cover . . . . . . . . . . . . . . . . 8 13. Play/Pause Button . . . . . . . . . . . . . . . . . . . . 15, 16 14. Level Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 15. Stereo Recording Indicator . . . . . . . . . . . . . . . . 20 16. Long-play/Recording Mode Indicator . . . . . . . . 20 17. Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 19 18. Monaural Mode Indicator . . . . . . . . . . . . . . . . . . 20 19. Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 14 20. Disc Mode Indicator 21. Synchro Recording Indicator . . . . . . . . . . . . . . 22 22. Total Track Number Indicator . . . . . . . . . . . . . . 26 23. Disc Name Indicator . . . . . . . . . . . . . . . . . . . . . . 26 24. TOC Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 25. Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 27 26. Random Indicator . . . . . . . . . . . . . . . . . . . . . . . . 19 27. Track Number Indicator . . . . . . . . . . . . . . . . . . . 26 28. Character/Time Information Indicator 14 15 16 17 18 19 20 21 22 23 24 25 28 27 26 1 2 3 4 5 6 7 8 9 10 12 13 11

problems, observe the precautions listed below.
Do not disassemble or modify the unit.
Do not drop or subject the unit to shock.
Do not use the unit near open flames.
Do not spill liquid on the unit.
Do not use an external power supply, other than the 5V DC supplied with this unit, as it may damage it.
SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorised serv- ice centre.
Storing the unit Avoid using or leaving the unit in the following places.
Places exposed to direct sunlight for many hours (especially in cars with the doors and windows closed) or near heaters. (The cabinet may deform, change col- our or the unit may malfunction.)
Places exposed to excessive dust.
Places exposed to water.
Places where temperatures are excessively high or low.
Places (bathrooms) where the humidity is extremely high.
Places with strong magnetic fields such as TVs or loudspeakers.
Places exposed to vibration.
Places where sand can easily enter the inside of the unit (beaches etc.).
If the unit is used near radio tuners or TVs, noise and/ or picture interference may result. If you experience these problems, move the unit away from such devices.
Do not wear your earphones when you are crossing streets or near traffic.
Do not use your earphones whilst driv- ing a motor vehicle, it may create a traf- fic hazard and may be illegal. Remember to obey all of the safety rules in your area.
Do not play the unit at a high volume. Hearing experts advise against extend- ed listening at high volume levels.
If you experience ringing in your ears, reduce the vol- ume or discontinue use.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Attention should be drawn to the environmental as- pects of battery disposal.
The apparatus is designed for use in moderate climate.
This portable MD should only be used within the range of 0°C - 40°C (32°F - 104°F).
It is not recommendable to put the MiniDisc into a rear pocket, as this may damage the product when sit- ting.

Using with the Rechargeable Battery
Charging the rechargeable battery When the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully.
After the rechargeable battery is charged or used, it will get slightly warm. This is normal.
When the portable MD is turned on or operating, the battery will not be charged.
For information about the battery life, see the battery item in the "Specifications" on page 43. Do not force the battery cover open too far. AC 230V, 50/60Hz To the DC IN 5V socket Insert from the – side. 1 Insert the rechargeable battery. A rechargeable battery other than the AD-N55BT cannot be charged. 2 Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 5V socket. 3 Press the MENU/CHRG button. The battery indicator will scroll, and the battery will begin charging. Scrolling

About charging time After about 3.5 hours have passed, " " will go out. The battery is charged up to 90% if it is completely discharged. To charge the battery fully, continue charging for about 2 more hours. In this case, you do not need to press the MENU/CHRG button. Even if the MENU/CHRG button is pressed, " " will not appear. Notes: Caution: Using with the AC Adaptor Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 5V socket. Caution:
Insert the plugs firmly.
When the unit is not in use for extended periods, remove the AC adaptor from the wall socket. Note:
If power failure occurs whilst playing a disc using the AC adaptor, disconnect it from the wall socket. Otherwise, playback may start automatically when the electricity sup- ply resumes.
Charge the battery within the range of 5°C - 35°C (41°F - 95°F).
The unit can be left in the charg- ing state after it is completed.
Carry the battery in the supplied case. Apply the case on the end.
Use the specified battery AD-N55BT only. Do not charge a battery (nickel-cadmium, alkaline, etc.) other than that specified.
Do not remove the outer cover of the rechargeable battery. It may cause heat generation, fire, or ex- plosion.
Do not dip the battery in water, do not dispose of it in a fire, and do not take it apart.
If the rechargeable battery terminal is dirty, charging may not start. In such a case, wipe off the dirt with a dry cloth.
Do not disassemble the battery. AC 230V, 50/60Hz To the DC IN 5V socket

Using with the Alkaline Battery If you use the separately available battery case (AD- M18BC) and the supplied rechargeable battery at the same time, the MD can play much longer than with only one source of battery power. Use one commercially available alkaline battery (LR6, "AA" size). When using the alkaline battery, be sure to insert the rechargeable battery also. Caution:
Whilst you are using the rechargeable battery and the alkaline battery at the same time, do not remove either of them. If you do, when the unit is in the play mode, playback will stop. When in the recording mode, the recorded contents will be erased, and the power may be disconnected.
Do not replace the battery or the rechargeable battery during operation.
Do not use a rechargeable battery (nickel-cad- mium battery etc.) in the battery case.
If the unit is not used for a long period of time, remove the battery. (Even if the power is turned off, the battery will be drained slowly but continuously.) 2 1 RELEASE LOCK Open Press Back of the portable MD 1 Open the case cover. 2 Insert an alkaline battery into the battery case. 3 Attach the battery case to the portable MD.

Inserting a MiniDisc Notes:
Do not place the MiniDisc under the holder.
If any resistance is felt, do not force the MiniDisc into the unit, as it may cause damage to the unit. If resist- ance is felt, remove the MiniDisc and reload it.
The lid cannot be opened if "TOC" is displayed; refer to the instruction on page 13. Recording prevented Recordable When you record on a MiniDisc, check that the erase prevention tab is set to the "Recordable" position. 1 Slide the OPEN lever to release the com- partment door. 2 Lift it up. 3 Insert a MiniDisc as shown. 4 Close the compartment door.

When recording, it is recommended to use the AC adaptor and also install the battery. Should the power failure occur, the power source would be automatically switched to the battery. DIGITAL OUT RIGHT LEFT I To connect to a stereo system with "LINE OUT" or "AUDIO OUT" sockets (Analogue connection) To the wall socket Red : To Right White : To Left Supplied connection cable I To connect to a stereo system with a "DIGITAL OUT" or "OPTICAL OUT" socket (Digital connection) Compared to analogue connection recording, it allows high-quality recording. Some audio systems do not have a DIGITAL OUT socket. Check before connecting. If the audio system has only one pair of sockets, they are usually for input only and recording via this connection is not possible. AC 230V, 50/60Hz Separately available connection cable (AD-M1DC) To the DC IN 5V socket To the LINE IN/ OPTICAL socket

After any recording or editing function, "TOC" (Table Of Contents) is displayed. To finalise the recording or editing function, turn the power off. During this process "TOC" will flash and "TOC EDIT!" will be displayed. During any recording or editing function, the MiniDisc unit lid is locked, and the MiniDisc cannot be removed until the process is finalised. Warning: If the power is removed (Battery/AC adaptor) whilst "TOC" is displayed, the MiniDisc unit lid will remain locked until the battery/main power is restored and the unit is turned on. Your new recordings or edited changes will be lost and your MiniDisc may become unusable. Caution: Whilst "TOC" or "TOC EDIT!" is displayed, follow the instructions below. Otherwise, tracks may not be recorded properly.
To prevent recorded MiniDiscs from being erased accidentally Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indicated by the arrow. The MiniDisc will then be protected against accidental erasure. To add a recording to such a MiniDisc, slide the acciden- tal erase prevention tab back to its original position.
Helpful tip when attaching a label When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and you may not be able to remove it. - Do not jerk or bump the unit. - Do not unplug the AC adaptor. - Do not remove the battery. - Do not subject the unit to shock.
If the label peels off or partially lifts away, replace it with a new one.
Do not put a new label on top of an ex- isting one.
Attach the label only in the specified location. Recording prevented Recordable

The portable MD does not work whilst in the hold mode. As for the details, see page 17. 1 Press the REC button. 2 Begin playback on the stereo system con- nected to this portable MD. 3 Press the REC LEVEL or button to adjust the recording level. Analogue recording Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between -4 dB and 0 dB. Level meter indicator Digital recording You can adjust the level in 1dB increments between +12dB and -12dB. +12dB to -12dB Once you adjust the digital recording level, the setting is retained even after the recording stops. (For cancel- lation instructions, see page 28.) 4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode. Here you can search for the track to be recorded.

the recording.
You cannot adjust the bass level whilst recording.
Complete the operation within 7 seconds whilst selecting the menus. To interrupt recording Press the button.
To resume recording, press the button again.
The track number will be increased by one each time the recording is interrupted. To stop recording Press the :OFF/HOLD button. Notes:
Whilst "TOC" appears, the MiniDisc recorded contents have not yet been updated.
To prevent the new recording from being lost, it is not possible to remove the MiniDisc whilst "TOC" is dis- played. To update the recorded contents of the MiniDisc Press the :OFF/HOLD button whilst in the stop mode. The power turns off after recorded contents have been updated on the MiniDisc. 5 Press the MENU/CHRG button repeatedly to select "REC MODE". 6 Press the ENTER/SYNC button. 7 Press the MENU/CHRG button repeatedly to select the recording mode (page 20). 8 Press the ENTER/SYNC button. The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed. 9 Press the button to start the MiniDisc unit recording. 10Begin playback on the stereo system, the output will be recorded. (2 times long recording) (4 times long recording) (Monaural recording) (Stereo recording) TOC display

Press the button. To resume playback, press the button again. To stop playback Press the :OFF/HOLD button. If the unit is not operated for at least 2 minutes whilst in the stop mode, the power will shut off automatically. To turn off the power Press the :OFF/HOLD button whilst in the stop mode.
Volume control Press the VOL+ button to increase the volume and the VOL- button to decrease the volume. L R Right channel Left channel To the PHONES socket 1 Insert the earphones plug into the PHONES socket. 2 Insert a MiniDisc (page 11). 3 Press the button. Playback starts automatically with a playback only MiniDisc or a MiniDisc which is protected against accidental erasure (Auto-play function). Volume (0 - 30)

Each time the BASS button is pressed, the tone will be switched as follows. Notes:
You cannot change the bass setting whilst selecting menus.
Reduce the volume before starting to play. MiniDiscs, compared to ordinary cassette tapes, have very little noise. If the volume is adjusted according to your usual expectations of noise, high volume may damage your hearing.
The sound escaping from your earphones may annoy people around you. In particularly crowded places (such as on trains or buses), reduce the volume. Hold Function The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. Press the HOLD button for 2 seconds or more. If the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. "HOLD OFF" will be shown. BASS 1 Emphasised slightly. BASS 2 Emphasised more. BASS 3 Emphasised fully. BASS OFF Cancelled. Hold Release If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained.

Normal playback will resume when the or but- ton is released.
When the end of the last track is reached during fast forward, the unit will enter the pause mode. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode.
To locate the beginning of a track
To skip a number of tracks at one time, press the or button repeatedly until the desired track number is shown.
When you press the button, playback starts from the beginning of the track. For audible fast forward: Press and hold down the button during playback. For audible fast reverse: Press and hold down the button during playback. To move to the beginning of the next track: Press the button during playback. To restart the track being played: Press the button during playback. To locate the next track: Press the button whilst the unit is stopped. To locate the previous track: Press the button whilst the unit is stopped.

Press the ENTER/SYNC button whilst a MiniDisc recorded in the monaural mode is being played.
If a track recorded in the stereo mode is reached during fast playback, the fast playback mode will be cancelled.
Depending on the contents recorded on a MiniDisc, it may be difficult to hear them. To interrupt fast playback Press the button during playback. When the button is pressed again, the unit will resume fast playback. To return to normal playback Press the ENTER/SYNC button.
Random play or repeat play Notes:
If the playback mode is selected whilst stopped, press the button to start playback.
When "TOC" is displayed, random play or repeat play is impossible.
In random play the unit will select and play tracks auto- matically. (You cannot select the order of the tracks.) After all of the tracks have been played once in random order, the unit will stop automatically.
During random, random repeat, or single track repeat play, you can forward or reverse the MiniDisc only within the track being played.
During random play, the unit cannot find the beginning of any track which has been played.
Repeat play lasts until you stop the unit.
Complete the operation within 7 seconds whilst selecting the menus. 1 During playback, press the MENU/CHRG button repeatedly to select "PLAY MODE". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button repeatedly to select the desired playback mode. RANDOM : Random play RANDOM REP : Repeat play of tracks in random order ALL REPEAT : Repeat play of all of the tracks 1Tr REPEAT : Repeat play of a single track NORMAL : Normal playback 4 Press the ENTER/SYNC button. The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed.

2 times and 4 times long recording Double or quadruple time of stereo recording is possible. Monaural recording In monaural, you can record twice as long as the stereo recording. A track recorded in monaural can be played back in dou- ble speed, see page 19. Notes:
The recording mode remains unchanged until a new mode is selected.
Complete the operation within 7 seconds whilst selecting the menus. 1 When a recording is paused, press the MENU/CHRG button repeatedly to select "REC MODE". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button repeatedly to select the desired recording mode. 4 Press the ENTER/SYNC button. The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed. 5 Start recording. Stereo recording(SP) 2 times long recording(LP2) 4 times long recording(LP4) Monaural recording(MONO)

times long recording mode, and 4 times long recording mode on one MiniDisc.
In monaural recording, the sound on the right and left channels is mixed even if the input source is in stereo. Although you can hear the stereo sound from the ear- phones, the recorded sound is monaural.
Tracks recorded in 2 times long recording and 4 times long recording modes cannot be played with the unit that does not support these modes. On such a unit, no sound is heard. (The operation may vary depending on the unit.)
Tracks recorded in monaural cannot be played if equipment does not support the monaural playback.
About ATRAC The ATRAC (Adaptive TRansform Acoustic Coding) sys- tem compresses the sound data into 1/5 by cutting out the inaudible sound. Since the sound is selected based on psychoacoustics masking, the sound quality is not impaired. This unit is equipped with the ATRAC3 com- pressing system that can reduce the sound data to 1/10 or 1/20 of its original size. By employing this system, 2 times and 4 times long recordings are enabled in stereo mode.
About the recording mode You can select the recording mode from stereo recording, 2 times long recording, 4 times long recording, and mon- aural recording. Recordable time varies depending on the recording mode. If the tracks are recorded on an 80- minute MiniDisc, its recording time changes as follows:
Caution for 4 times long recording (LP4) Special compressing method allows the 4 times long recording to realise long-time stereo recording. There- fore, some noise is recorded occasionally. If sound qual- ity should be emphasised, stereo recording or 2 times long recording is recommended. Indication Recording mode Recording time SP Stereo MAX. 80 min. LP2 2 times long (stereo) MAX. 160 min. LP4 4 times long (stereo) MAX. 320 min. MONO Monaural MAX. 160 min.

Playback sound-actuated recording Recording automatically starts or pauses by detecting sound from the stereo system (Synchronised recording). To interrupt recording
When the stereo system is stopped, the unit will enter the synchro recording pause mode. When playback is resumed, the recording will be resumed.
If a silence lasts for 3 seconds or more, the recording will be paused (pause function does not work for approximately 10 seconds after a recording starts). When the unit receives sound again, recording auto- matically starts.
A new track number is created when the recording resumes. 1 Press the REC button. 2 Begin playback on the stereo system con- nected to this portable MD. 3 Press the REC LEVEL or button to ad- just the recording level (see page 14). 4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode. Select the starting point for your recording and press the PAUSE button. 5 Press the MENU/CHRG button repeatedly to select "REC MODE". 6 Press the ENTER/SYNC button. 7 Select the recording mode (step 3, page 20) and press the ENTER/SYNC button. The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed. 8 Press the ENTER/SYNC button again.
"SYNC" will flash.
To cancel the operation, press the :OFF/HOLD button. 9 Begin playback on the stereo system. Recording will begin automatically.

track You can erase a portion of a track and make a new recording. All of the tracks that follow the newly recorded track will be erased. Note: To keep a track after the point you want to make a new recording, move the track and then make recording after that point. (See "Editing a Recorded MiniDisc", page 34.) 1 During playback, press the button at the point where you want to begin recording. 2 Press the REC button. To cancel the operation, press the :OFF/HOLD but- ton. 3 Press the ENTER/SYNC button. All of the tracks and track names will be erased, fol- lowing the point where the playback is paused. 4 Press the MENU/CHRG button repeatedly to select "REC MODE". 5 Press the ENTER/SYNC button. 6 Press the MENU/CHRG button repeatedly to select the recording mode (step 3, page 20). 7 Press the button. Recording will start.

To create your own track numbers You can create your own track numbers at any point. Whilst recording, press the REC button at the point where you want to create track numbers. The track number will be increased by one. One track number will be added every time the REC but- ton is pressed. Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the oper- ation will be disabled. In that case, wait until the next operation can be resumed.
Recording tracks as a single track You can record several pieces of music as a single track by disabling the auto marker function. When a recording is paused or whilst recording... Notes:
When making digital recordings using a CD player or an MiniDisc player, track numbers will be created auto- matically regardless of the setting of the auto marker function.
Complete the operation within 7 seconds whilst select- ing the menus. In stereo recording Within 40 seconds In 2 times long recording Within 80 seconds In 4 times long recording Within 160 seconds In monaural recording Within 80 seconds 1 Press the MENU/CHRG button repeatedly to select "MARK". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button to select "MARK OFF".

Track numbers may not always be created in the right place, depending on the source to be recorded from, such as signals with noise.
The track numbers on the playback side may not match the track numbers recorded on the MiniDisc.
When recording, if a programmed playback is per- formed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source.
Track numbers may not be created properly, depend- ing on the connected stereo system.
About sampling rate converter This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders.
Note for digital recording You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected. 1. Track numbers are created automatically during re- cording via the analogue connection when a silence of 1 second or more is detected (Auto marker func- tion). A series of tracks can be recorded as one by disabling the auto marker function (see page 24). 2. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). About 1 second First track Silence Second track First track First track Second track Third track Third track Second track Track A Track A Track B Track B Track C Track C Playback side Recording side Digital signals Digitally recorded MiniDisc Cannot record CD player, MiniDisc player, etc. Digital connection Digital connection

ing time of the track Notes:
If the disc name or the track name was not originally recorded on the MiniDisc, "NO NAME" will be displayed.
Elapsed playback time and remaining playback time may be different from the actual time.
The selected display will not change even after the disc is replaced.
Complete the operation within 7 seconds whilst selecting the menus.
To check the remaining recording time and the total playing time 1 During playback, press the MENU/CHRG button repeatedly to select "DISPLAY". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button. Each time the button is pressed, the display will change as follows. Track number Elapsed playback time Track name Remaining playback time A B C D 1 Whilst in the stop mode, press the MENU/ CHRG button repeatedly to select "DIS- PLAY". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button. Each time the button is pressed, the display will change as follows. Total number of tracks Remaining recording time Disc name Total playing time
Remaining recording time varies depending on the set recording mode.
Remaining recording time will not be displayed with a playback only MiniDisc. A B C D

vidual track
Checking the remaining amount of bat- tery level The remaining amount of battery level is shown by the battery indicator ( ) during operation.
When the battery is completely discharged, the bat- tery indicator will flash. Recharge the battery.
When the battery has run out completely, "BATT EMPTY" will appear. Then, the power will be discon- nected automatically. Notes:
If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged.
The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on.
When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown.
The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. This is normal. 1 Whilst in the stop mode, press the or button to display the track number and track name. Track number Track name 2 Press the MENU/CHRG button repeatedly to select "DISPLAY". 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button to select the playing time. Playing time Each time the or button is pressed, the play- ing time of the previous or next track will be dis- played. How to read the battery indicator When the battery level is high When the battery level is very low

Changing Default Settings (*) indicates default setting.
Beep sound You can eliminate the confirmation sound that beeps when you press a button.
Auto play You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc.
Auto power save When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. (Battery will drain faster.) What is auto power save function? During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this function is cancelled, the storage time cannot be adjusted.
If this unit is used with the AC adaptor, the storage time will be 40 seconds regardless of the settings.
The storage time varies depending on the recording mode.
Digital recording level "D.L MODE 1" The digital recording level you set will be kept even after cancelling recording. "D.L MODE 2" Every time you cancel recording, the level will return to [D.L 0dB]. Whilst in the stop mode ... 1 With a MiniDisc inserted, press the MENU/ CHRG button for 2 seconds or more. "SET UP" will appear. When you release the button, "BEEP" will appear. 2 Press the MENU/CHRG button to display the menu. 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button to switch items. 5 Press the ENTER/SYNC button. MENU SETTING ITEM BEEP (Confirmation sound) BEEP ON* Beep BEEP OFF Silent AUTO PLAY (Auto play) A-PLAY ON* Set. A-PLAY OFF Cancelled. POWER SAVE (Auto power save) AUTO Psave* Set. Psave OFF Cancelled. D-LEVEL (Digital re- cording level) D.L MODE 1* Setting re- tained. D.L MODE 2 Cancelled.

Titling a MiniDisc
Creating disc and track names Load a MiniDisc to be named. A playback only or record- ing prevented MiniDisc cannot be edited. 1 Whilst in the stop mode, press the MENU/CHRG button to select "EDIT". Whilst in the pause mode, press the MENU/CHRG button to select "EDIT". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button to select "DISC NAME". Press the MENU/CHRG button to select "TRACK NAME". 4 Press the ENTER/SYNC button.
The unit will enter the character input mode.
To cancel the operation, press the :OFF/HOLD button. 5 Press the button repeatedly to select the type of characters. Cursor The first 3 characters in the group of the selected characters will be displayed for about 1 second. 6 Press the or button repeatedly to se- lect the letter. 7 Press the ENTER/SYNC button to enter it. Position where the next letter will be entered 8 To enter more letters, repeat steps 5 - 7. 9 When the name has been completely en- tered, press the MENU/CHRG button.
"TOC" will be displayed. To write the updated con- tents to the MiniDisc, press the :OFF/HOLD but- ton.
You cannot remove the MiniDisc whilst "TOC" is displayed. "TOC" will not disappear until the re- corded contents have been updated. Note:
Complete the operation within 7 seconds whilst se- lecting the menus. (Capital letters) (Lower-case letters) (Numbers and symbols)

Titling a MiniDisc (continued)
To add characters
To erase a character Press the VOL+ or VOL- button to move the cursor to the character you want to erase, and then press the BASS button.
To enter a space Press the VOL+ button to move the cursor to the right. Note: One disc name and up to 255 track names can be cre- ated per disc (a maximum of 100 characters for the disc and each track name and a total of 1,700 characters can be entered. However, if any tracks are recorded in the 2 times or 4 times long recording mode, the number of characters to be entered is decreased, since the informa- tion of the recording mode is stored by the track).
Characters (symbols) 1 Put the unit in the character input mode. (Perform steps 1 - 4 on page 29.) 2 Press the VOL+ or VOL- button to move the cursor to the character before which you want to add a new character. 3 Select the character to add. (Perform steps 5 - 7 on page 29.) 4 Press the MENU/CHRG button.
"TOC" will be displayed. To write the updated con- tents to the MiniDisc, press the :OFF/HOLD but- ton.
You cannot remove the MiniDisc whilst "TOC" is displayed. "TOC" will not disappear until the re- corded contents have been updated. Space A C D E F G H B 1 3 4 5 6 7 8 2 a c d e f g h b I J K L M S U V W X Y Z T R N Q P . , / / . , ! " # : ( + $ * 9 0 & ' < ; = O i j k l m s u v w x y z t r n o q p . , / % _ ` @ > ? ) Capital letters Lower-case letters Numbers and symbols indicates a space.

Stamping titles from another MiniDisc Before stamping When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the Master MiniDisc to another MiniDisc (for stamping). Note: If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display "Can'tSTAMP" and turn off the power. If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation. 1. What is a master MiniDisc? A recordable MiniDisc that contains tracks and character information. (You cannot transfer the information from a playback-only MiniDisc.) 2. What is a MiniDisc for stamping? A MiniDisc that contains the same tracks in the same or- der as the master MiniDisc. (Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same.) Master MiniDisc operation 1 Insert a master MiniDisc. Do not mistake the master MiniDisc for the target one. 2 Whilst in the stop mode, press the MENU/ CHRG button repeatedly to select "EDIT". 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button repeatedly to select "NAME STAMP". 5 Press the ENTER/SYNC button. To cancel the operation, press the :OFF/HOLD button. 6 Press the ENTER/SYNC button. 7 When the unit displays "CHANGE MD", re- move the master MiniDisc. Remove it without turning off the power. Or, the operation will be cancelled. Operation of the MiniDisc for stamping 8 Load a MiniDisc for stamping. 9 Press the ENTER/SYNC button. The unit will finish recording the character information and enter the stop mode.

Editing a Recorded MiniDisc
To erase one track at a time
To erase all of the tracks at once Caution: Once a track has been erased, it cannot be recov- ered. Check the track number before erasing it. 1 Start playing the track to be erased, and press the button. 2 Press the MENU/CHRG button repeatedly to select "EDIT". 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button repeatedly to select "ERASE". 5 Press the ENTER/SYNC button. To cancel the operation, press the :OFF/HOLD but- ton. 6 Press the ENTER/SYNC button again. The track will be erased. 7 To erase other tracks, repeat steps 1 - 6. Note:
Complete the operation within 7 seconds whilst se- lecting the menus. 1 Whilst in the stop mode, press the MENU/ CHRG button repeatedly to select "EDIT". 2 Press the ENTER/SYNC button. 3 Press the MENU/CHRG button repeatedly to select "ALL ERASE". 4 Press the ENTER/SYNC button. To cancel the operation, press the :OFF/HOLD but- ton. 5 Press the ENTER/SYNC button again. All of the tracks will be erased.

To divide a track
To combine tracks 1 Start playing the track to be divided into two. Press the button at the point where you want to divide the track. 2 Press the MENU/CHRG button repeatedly to select "EDIT". 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button repeatedly to select "DIVIDE". 5 Press the ENTER/SYNC button. To cancel the operation, press the :OFF/HOLD but- ton. 6 Press the ENTER/SYNC button again. The track will be divided into two tracks, and the unit will be paused at the beginning of the second of the two new tracks. 1 Start playing the last of the two tracks to be combined, and press the button. 2 Press the MENU/CHRG button repeatedly to select "EDIT". 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button repeatedly to select "COMBINE". 5 Press the ENTER/SYNC button. To cancel the operation, press the :OFF/HOLD but- ton. 6 Press the ENTER/SYNC button again. The two tracks will be combined, and the unit will be paused at the beginning of the combined track.

Editing a Recorded MiniDisc (continued)
To move a track When a track has a name before dividing: The two new tracks will have the same name. However, in the "TOC FULL" condition, the second track may not be named. Total number of tracks that can be divided: Each disc can hold up to 255 tracks. However, even if the number of assigned tracks has not reached 255, it might not be possible to make any further divisions of tracks. To combine two non-adjacent tracks: First, put the two tracks next to each other in the order you want using the MOVE function. Then combine them using the COMBINE function. When one or both tracks to be combined have a name: The first track name will be used. However, when the first track does not have a name, the second track name will be used. In the following cases, tracks may not be combined. 1 Play the track to be moved, and press the button. 2 Press the MENU/CHRG button repeatedly to select "EDIT". 3 Press the ENTER/SYNC button. 4 Press the MENU/CHRG button repeatedly to select "MOVE". 5 Press the ENTER/SYNC button. To cancel the operation, press the :OFF/HOLD but- ton. 6 Press the or button to select the di- rection. 7 Press the ENTER/SYNC button again. The track will be moved, and the unit will be paused at the beginning of the track.
Tracks recorded by different input modes/sources can- not be combined. Example: Digital recorded track and analogue recorded track. Different recording modes (stereo recording, 2 times long recording, 4 times long recording, monaural record- ing).
Tracks whose recording time is less than 12 seconds.

Listening through Another System
Listening through a stereo system Notes:
It is recommended that the volume level of the MiniDisc unit be set to maximum when listening through a stereo system.
When recording with stereo system, eliminate the con- firmation sound (page 28). Otherwise, it will also be recorded.
The recording will be made in the analogue mode.
Character information will not be recorded.
Listening through a car stereo Notes:
Adjust the volume of both this portable MD and a car stereo.
Do not operate this portable MD whilst you drive a car. It may distract your attention and cause a traffic acci- dent.
Do not use any car adaptor except for the separately available AD-CA20X.
Remove the battery when you power the unit from the car battery. To the LINE INPUT sockets To the PHONES socket White: To the left Red: To the right Separately available car adaptor (AD-CA20X) Separately available cassette adaptor (AD-CT14) To the PHONES socket To the DC IN 5V socket

Other Features and Caution
Resuming auto play When you stop playback and replay the MiniDisc without removing it, playback starts from the point you stopped it. Once you remove the MiniDisc, playback starts from the first track. The unit provides the following functions when you use it with the separately available car adaptor (AD- CA20X) (when the battery is removed):
Rechargeable battery
A rechargeable nickel-metal hydride battery is the only kind that can be used. Even if the battery is not used, you should charge it at least once every three months because of the special quality of this battery.
The rechargeable battery can be charged approxi- mately 300 times.
When the operating time is reduced to about half the normal amount of time, even after a full charge is per- formed, replace the battery with a new one (AD- N55BT).
When the battery is charged for the first time or is charged after not being used for a long period, the operating time may be shorter than normal. The bat- tery life will recover with normal use i.e. charging and discharging.
To avoid shortening the service life of the battery only recharge the battery after it has been completely dis- charged.
If the rechargeable battery is used in a cold environ- ment, the operating time will be reduced.
Do not carry the battery in your pocket or a bag together with metal objects (keys, coins, jewelry, etc.). The battery may short out and generate significant amounts of heat.
Do not short-circuit the terminals as they will become very hot and will damage the battery.
Do not drop or subject the battery to shock.
Do not insert objects (metal etc.) into the battery com- partment of this product. 1. When you turn off the engine, the power of this porta- ble MD also turns off. (It may not work with some types of cars.) 2. When you restart the engine, playback starts from the beginning of the stopped track. Stopped track Stopping Playing First track First track Stopped track Stopping Playing First track Stopped track Stopping Playing

MiniDisc System Limitations The unit may have the following symptoms whilst recording or editing. The unit is not out of order. SYMPTOM LIMITATIONS "DISC FULL" or "TOC FULL" appears even though the MiniDisc still has re- cording time left. More than 255 tracks (maximum) cannot be recorded regardless of the recording time. If the MiniDisc is recorded or edited repeatedly or if it has scratches (recording skips scratched parts), you may not be able to record the maximum tracks above. The remaining recording time does not increase even though you erased tracks. The unit does not count non-recorded portions that last 12 or fewer seconds to display the remaining recording time. The time may not increase even if you erase short tracks. The total of the recorded time and the remaining time does not match the max- imum recordable time. One cluster (approximately 2 seconds) is the minimum unit for re- cording. For example, a 3-second track uses 2 clusters (approxi- mately 4 seconds). Therefore, the actual recordable time may be shorter than the displayed time. (The number of seconds indicates that in the stereo recording mode (SP). It varies depending on the recording mode.) Combine function does not work. A MiniDisc on which recording and editing are repeated may not al- low the combine function. Sound skips in fast reverse/forward. If one track is divided and recorded in separate places on a repeat- edly recorded or edited MiniDisc, sound may skip. A track number is created in the middle of a track. A track number may be created if there are scratches or dust on the MiniDisc.

ERROR MES- SAGES MEANING BATT EMPTY
The battery has run down. BLANK MD
Nothing is recorded. (Replace the disc with a recorded disc.) Can't COPY
You tried to record from a copy prohib- ited MiniDisc. (Record using the analogue cable.)
You tried to record signals other than music (such as data). Can't EDIT
A track cannot be edited. (Change the stop position of the track and then edit it.) Can't PLAY
You tried to play back a track that can- not be played with this equipment. Can't READ (*)
The disc data cannot be read because the disc is damaged. (Reload the Minidisc or replace it with an- other one.) Can't REC
Recording cannot be performed cor- rectly due to vibration or shock. ERROR MES- SAGES MEANING Can'tSTAMP
Stamp function does not work. (Check the number of tracks.) Can'tWRITE
Cannot save the TOC information cor- rectly to a MiniDisc. DEFECT!
The disc is scratched. (If the recorded sound is not right, retry recording or replace the disc with a re- cordable one.) DISC FULL
The disc is out of recording space. Er-MD (**)
The microprocessor has reported a system fault and the unit is out of or- der. (To have it repaired, go to the distributor where you purchased the unit.) HOLD
The unit is in the hold mode. LOCKED
You removed a MiniDisc whilst record- ing or editing. (Turn off the power before removing the MiniDisc.) NO DISC
A disc has not been loaded.

ERROR MES- SAGES MEANING NO SIGNAL
Poor connection of the digital cable.
No output signal comes out from the connected unit to playback. (Use the AC power for the connected unit.)
The input signal has improper sam- pling frequency. PLAY MD
You tried to record on a playback-only disc. PROTECTED
The write protection tab of a MiniDisc is set to the protected position.
You tried to record on a playback-only disc. SORRY
Since a track number is currently be- ing located or updated, the unit cannot accept your command. (Wait for a while and try the operation again.) ERROR MES- SAGES MEANING TEMP OVER
The temperature is too high. (Turn off the power, and wait for a while.) TOC FORM (**)
There is an error in the recording sig- nal. (Erase all of the tracks, and then record again.) TOC FULL
There is no space left for recording character information (track names, disc names, etc.). Tr. Protect
The track has been protected from be- ing erased. (Edit the track with the device on which it was recorded.) ? DISC
A disc which contains data other than music was played. (A disc which contains nonmusic data cannot be played.)
There is an error in the signal recorded on the disc.

with this product, check the following before calling your authorised SHARP dealer or service centre. The unit does not turn on.
Is the AC adaptor disconnected?
Is the battery exhausted?
Is the unit in the hold mode?
Has condensation formed inside the unit?
Is the unit being influenced by mechanical shock or by static electricity? No sound is heard from the earphones.
Is the volume set too low?
Are the earphones plugged in?
Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music? When the operation buttons are pressed, the unit does not respond.
Is the unit in the hold mode?
Is the battery exhausted?
Is the earphones plug inserted firmly? Some sounds are skipped.
Is the battery exhausted?
Is the unit being subjected to excessive vibration? The MiniDisc cannot be ejected.
Has the track number or character information been written on the disc yet?
Is the unit in the recording or editing mode? Recording and editing are impossible.
Is the MiniDisc protected against accidental erasure?
Is the unit connected properly to the other equipment?
Is the AC adaptor unplugged or did a power failure oc- cur whilst recording or editing?
Is the unit in the hold mode?
Is an optical signal being output from the stereo sys- tem? Read the operation manual for the stereo sys- tem.

When this product is subjected to strong external interfer- ence (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following:
Moisture condensation When the unit has condensation inside, the disc signals cannot be read, and the unit may not function properly. In the following cases, condensation may form inside the unit.
Shortly after turning on a heater.
When the unit is placed in a room where there is excessive steam or moisture.
When the unit is moved from a cool place to a warm place. To remove condensation: Remove the MiniDisc and leave the unit for approxi- mately 1 hour. The condensation should evaporate and the unit will work properly. Maintenance
Cleaning Clean the plugs and the connecting sockets. If the plugs or sockets are dirty, noise may be heard. Cleaning will prevent noise. Caution:
Do not use chemicals for cleaning (petrol, paint thin- ner, etc.). It may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions. 1. Unplug the AC adaptor from the wall socket. 2. Remove the battery. 3. Leave the unit completely unpowered for approxi- mately 30 seconds. 4. Plug the AC adaptor back into the wall socket and re- operate the unit. When the unit becomes dirty Clean it with a soft cloth. When the unit is excessively dirty, use a soft cloth dampened in water (external sur- faces only).

es for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Power source: DC 1.2 V: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1 DC 5 V: AC adaptor (AC 230 V, 50/60 Hz) DC 1.5 V: Separately available battery case, AD-M18BC (Commercially available, "AA" size (LR6), alkaline battery x 1) DC 4.5 V: Optional car adaptor, AD-CA20X (for cars with a 12-24 V DC negative earth electrical system) Power consumption: 7 W (AC adaptor) Output power: RMS: 20 mW (10 mW + 10 mW) (0.2 % T.H.D.) Charging time: Approx. 3.5 hours (90 %) Approx. 5.5 hours (fully charged)(When using the AC adaptor included with the unit) Dimensions: Width: 76 mm (3") Height: 22.9 mm (29/32") Depth: 83 mm (3-9/32") Weight: 148 g (0.33 lbs.) with rechargeable battery Input socket: Line/optical digital Output socket: Earphones (impedance: 32 ohms) Type: Portable MiniDisc recorder Signal readout: Non-contact, 3-beam semiconductor laser pickup Audio channels: Stereo 2 channels/monaural 1 channel Frequency response: 20 - 20,000 Hz ( 3 dB) Rotation speed: Approx. 400 - 1,350 rpm Error correction: ACIRC (Advanced Cross Interleave Reed-Solomon Code) Coding: ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type Recording method: Magnetic modulation overwrite method Sampling frequency: 44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.) Wow and flutter: Unmeasurable (less than 0.001 % W. peak)

tery, an optional battery case is required.
The continuous recording time is for analogue inputs when the volume level is set to "VOL 0".
The continuous play time shows the value when the volume level is set to "VOL 15".
The above values are the standard values when the unit is charged and used at an ambient temperature of 25°C (77°F).
The operating time when using an alkaline battery may be different, depending on the type and manufac- turer of the battery, and on the operating temperature. Stereo 2 times long 4 times long When using the rechargeable battery (fully charged) included with the unit Continuous recording: Approx. 7 hours Continuous play: Approx. 11 hours Continuous recording: Approx. 9.5 hours Continuous play: Approx. 13 hours Continuous recording: Approx. 12.5 hours Continuous play: Approx. 15 hours When using one, commercially available, high capacity, "AA" size (LR6), alkaline battery (The rechargeable battery is in the unit, discharged.) Continuous recording: Approx. 6 hours Continuous play: Approx. 15.5 hours Continuous recording: Approx. 9.5 hours Continuous play: Approx. 19 hours Continuous recording: Approx. 13 hours Continuous play: Approx. 22 hours When using one, commercially available, high capacity, "AA" size (LR6), alkaline battery with the rechargeable battery (fully charged) Continuous recording: Approx. 15.5 hours Continuous play: Approx. 27 hours Continuous recording: Approx. 23 hours Continuous play: Approx. 32 hours Continuous recording: Approx. 30 hours Continuous play: Approx. 38 hours Reference input level Input impedance LINE 100 mV 20 kohms Specified output Maximum output level Load imped- ance Earphones - 10 mW + 10 mW 32 ohms LINE 250 mV (-12 dB) - 10 kohms

Ltd. (hereinafter called “the Company”) guarantee to pro- vide for the repair of, or at its option replace this Sharp Equipment, or any component thereof, (other than bat- teries), which is faulty or below standard, as a result of inferior workmanship or materials. The conditions of this guarantee are: 1. The guarantee shall only apply to defects which occur within one year from the date of purchase, provided that this equipment is sent to the repair address within this period. 2. This guarantee covers equipment intended for private domestic use only. This guarantee does not apply to equipment used in the course of a business, trade or profession. 3. The guarantee does not cover MiniDiscs or batteries. A0110.TO TINSE0406AWZZ 4. This guarantee does not cover any faults or defects caused by accident, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempt at ad- justment or repair other than by a Service Facility ap- pointed by Sharp. 5. In the unlikely event of a defect occuring, the product must be returned to the Company’s repair centre with proof of purchase. A postage paid label and a fault re- port form are supplied with the product for this purpose. It is your responsibility to ensure that the packaging is adequate, and to obtain proof of posting. Further details of the repair service, which is available after the guarantee period on a chargeable basis, and additional report forms and labels can be obtained by telephoning 0870 738 0000. 6. No person has any authority to vary the terms or condi- tions of this guarantee. 7. This guarantee is offered as an additional benefit to the consumer’s statutory rights and does not affect these rights in any way. TERMS OF GUARANTEE SHARP ELECTRONICS (U.K.) LTD. Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE SHARP CORPORATION 9906 (0101)