Sharp XG-NV5XB Quick Reference

1. Connecting an IBM or Compatible PC Remote mouse receiver (supplied) Use this terminal to connect the supplied mouse control cable to the remote mouse receiver. Mouse control cable for Mac (supplied) Mouse control serial cable (supplied) Computer cable (supplied) Computer cable (supplied) LCD Projector XG-NV5XB/QR(E-1) 1 2 4 3 2 Mouse control cable for IBM PS/2 (supplied) 1 ON MUTE TOOLS R-CLICK ENTER INPUT MOUSE LIGHT LCD PROJECTOR ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN VOL OFF 1 ON MUTE TOOLS R-CLICK ENTER INPUT MOUSE ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN VOL OFF TOOLS R-CLICK ENTER INPUT MOUSE ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN OFF LIGHT LCD PROJECTOR TOOLS R-CLICK ENTER INPUT MOUSE LIGHT ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN 2 2 1. Plug one end of the supplied computer cable into the blue “COMPUTER INPUT” port on the projector. 2. Plug the other end of the supplied computer cable into the “Monitor Output” port on the computer. (Also blue on many PCs.) Use the supplied Macintosh adaptor when using Macintosh computers with your Sharp projector. This adaptor may not be necessary with some Macintosh computers. 3. Plug the supplied power cord into the AC socket (1) on the back of the projector and press the MAIN POWER switch (2). 4. Press the POWER ON button on the projector or on the “Power” remote control. 5. Turn on the computer. 6. Press the AUTO SYNC button on the projector or on the “Power” remote control to adjust the image. POWER ON button AUTO SYNC button AUTO SYNC button 5. Plug the supplied power cord into the AC socket (1) on the back of the projector and press the MAIN POWER switch (2). 6. Press the POWER ON button on the projector or on the “Power” remote control. 7. Turn on the computer. 8. Press the AUTO SYNC button on the projector or on the “Power” remote control to adjust the image. POWER ON button 2. Using the “Wireless” Mouse (PC or Macintosh) • Make sure that your computer is turned off while making any mouse control cable connections. • When using the wireless mouse with an IBM or compatible PC, you can use either a PS/2 or Serial cable connection. (See diagram below.) • Use the supplied mouse control cable for Mac when using the remote mouse receiver with a Macintosh computer. 3. Connecting a Macintosh Macintosh adaptor (supplied) Macintosh adaptor (supplied) 1. Set the proper switches on the supplied Macintosh adaptor to the desired resolution. (See back of adaptor for specific resolutions.) 2. Connect the supplied Macintosh adaptor to one end of the supplied computer cable. 3. Connect the other end of the Macintosh adaptor to the “Monitor Output” port on your Macintosh computer. 4. Plug the other end of the supplied computer cable into the blue “COMPUTER INPUT” port on the projector. ON OFF

COMPUTER INPUT 2 VIDEO INPUT XG-NV5XB/QR(E-2) 4. Connecting Video Equipment 6. Turning the Projector Power off 5. Selecting and Checking the Input Mode (VCR, DVD Player, Laser Disc Player) MAIN POWER Switch To video output terminal To S-video output terminal To audio output terminals Use this terminal when the audio- visual equipment to be connected has an S-VIDEO output terminal. ON MUTE TOOLS R-CLICK ENTER INPUT MOUSE LIGHT ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN VOL OFF MOUSE LIGHT LCD PROJECTOR ADJ. TOOLS R-CLICK ENTER INPUT MOUSE LIGHT LCD PROJECTOR ADJ. IrCOM FREEZE AUTO SYNC KEYSTONE ENLARGE MENU LASER BLACK SCREEN Printed in Japan TINS-6598CEN1 T2054-A 9P07-JWG 1. Connect the yellow (Video) RCA connector to the corresponding yellow terminals on the projector and video source. 2. Connect the red and white (Audio) RCA connectors to the corresponding red and white terminals on the projector and video source. 3. Wait until the projector fan turns off, then press the MAIN POWER switch. 2. Press the POWER OFF button again while the following screen is displayed. 1. Press the POWER OFF button on the projector or on the “Power” remote control. 1. Press the INPUT SELECT button on the projector or on the “Power” remote control to select the desired input mode. 2. Press the INPUT SELECT button again to change the mode as shown below. POWER OFF button • For better quality video, the S-video connection can be used. INPUT SELECT button PDF operation manuals in several languages are included in the CD-ROM. See “How to Access the PDF Operation Manuals” in the operation manual of the projector for more details.