Panasonic WVPS11B - CAMERA DRIVE UNIT Operating Instructions Manual

WV-PS11B Before attempting to connect or operate this product, please read these instructions completely. 

MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the pres- ence of uninsulated "dangerous volt- age" within the product's enclosure that may be of sufficient magnitude to con- stitute a risk of electric shock to per- sons. The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important oper- ating and maintenance (servicing) instructions in the literature accompa- nying the appliance. The serial number of this product may be found on the bot- tom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. WV-PS11B Serial No. Warning: This equipment generates and uses radio frequency energy and if not installed and used properly, i.e., in strict accor- dance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PER- SONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SA 1965 SA 1966 For U.S.A Caution: Before attempting to connect or operate this prod- uct, please read the label on the bottom.

FEATURES ....................................................................................................................................................................... 2 PRECAUTIONS ................................................................................................................................................................ 3 MAJOR OPERATING COMPONENTS AND THEIR FUNCTIONS .................................................................................... 4 CONNECTIONS ............................................................................................................................................................... 5 SPECIFICATIONS ............................................................................................................................................................ 9

cially designed to drive specified cameras such as WV- BP70 or WV-CP100. This simple system is specially designed for surveil- lance and security needs at offices, factories, schools, hospitals, public or residential buildings, etc. FEATURES • Stable DC power is supplied to the specified cam- era by a regulator in the camera drive unit. • A single coaxial cable connects the specified cam- era and camera input of the camera drive unit. • Three signals, video, DC power and vertical drive pulses, are carried by a single coaxial cable (used with the WV-BP70 or WV-CP100 camera.). • Audio signals can be transmitted from the speci- fied camera to the camera drive unit (used with the WV-CP100 or WV-CF20 camera.). • VD/SYNC input and output connectors for synchro- nizing in the parallel operation. • Built-in protection circuit protects the appliance in case of wrong connection.

cover to prevent the appliance temperature from rising. • Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. • Handle the appliance with care. Do not abuse the appliance. Avoid striking, shak- ing, etc. It could be damaged by improper han- dling or storage. • Do not expose the appliance to rain or moisture. Avoid trying to operate it in wet areas. Take immediate action if ever the unit becomes wet. Turn the power off and refer servicing to quali- fied service personnel. Moisture can damage the appliance, and cause danger due to electric shock. • Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean the unit when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently. • Do not drop any metallic parts through slots. This action could damage the appliance perma- nently. Turn the power off immediately and refer servicing to qualified service personnel. • Use the appliance under conditions where temper- atures are within –10°C - +50°C (14°F - 122°F), and humidity is below 90%. The input power source is 120V AC 60 Hz. Do not operate the appliance in an extreme envi- ronment where is out of its specified temperature or humidity range, or power source ratings.

CAMERA IN VIDEO OUT AUDIO OUT VD/SYNC IN VD/SYNC OUT SIGNAL GND CAUTION USE WITH SPECIFIED EQUIPMENT SEE ITS MANUAL BEFORE CONECTING. POWER ON OFF q Power On/Off Switch (POWER, ON/OFF) This switch is used to turn the camera drive unit and connected specified camera power on or off. The indicator lights up when the power of the cam- era drive unit is on. w Camera Input Connector (CAMERA IN) This connector accepts either a color or B/W com- posite video signal from the specified camera. It also supplies DC power and vertical drive pulses or synchronizing signals to the camera, and receives video and audio signal from the camera. e Video Output Connector (VIDEO OUT) The video signal of the specified camera is provid- ed at this connector for input into the video monitor. r Audio Output Connector (AUDIO OUT) The audio signal of the specified camera is provid- ed at this connector for input into the video monitor (used with the WV-CF20 or WV-CP100 camera.). t VD/SYNC Input Connector (VD/SYNC IN) The VD (Vertical Drive) pulse or VS (Video Sync) signal is supplied to this connector for synchroniz- ing the system. y VD/SYNC Output Connector (VD/SYNC OUT) The VD (Vertical Drive) pulse or VS (Video Sync) signal is provided at this connector for synchroniz- ing other system component.

unit is ON during connections, the protection circuit that protects it in case of wrong connection will operate and prevent the camera from functioning. • Connect only a specified camera, WV-BP70, WV-CF20 or WV-CP100. If another camera is connected, the cam- era drive unit will not operate due to activation of the protection circuit. CAMERA IN VIDEO OUT AUDIO OUT VD/SYNC IN VD/SYNC OUT SIGNAL GND CAMERA IN AUDIO OUT Camera Drive Unit WV-PS11B VIDEO OUT Monitor Camera

CAMERA IN VIDEO OUT AUDIO OUT VD/SYNC IN VD/SYNC OUT SIGNAL GND CAMERA IN VIDEO OUT AUDIO OUT VD/SYNC IN VD/SYNC OUT SIGNAL GND 6 5 4 3 2 1 CAMERA IN VD/SYNC Camera Drive Unit WV-PS11B VIDEO OUT Monitor Camera Camera CAMERA IN Camera Drive Unit WV-PS11B VIDEO OUT Monitor TL VTR

and CAMERA IN connector of the camera drive unit. The approximate maximum cable length is as follows: Coaxial DC R/1000 ft. of Maximum Cable Type Inner Conductor Cable Length RG-59/U Less than 30 Ω 200 m (660 ft.) RG-6/U Less than 12 Ω 500 m (1650 ft.) The maximum DC resistance of the cable between the camera and camera drive unit is 20 Ω. 2. Connect the coaxial cable between the video moni- tor and VIDEO OUT connector of the camera drive unit. The approximate maximum cable length is as follows: Type of coaxial cable RG-59/U (3C-2V) RG-6/U (5C-2V) RG-11/U (7C-2V) Recommended Maximum cable length (m) (ft) 250 825 500 1,650 600 1,980 Note: If the length of the coaxial cable between the camera drive unit and the video monitor exceeds the distance shown in the above table, a cable loss compensator should be used between the camera drive unit and the video monitor. 3. After connecting the specified camera to the cam- era drive unit, connect the audio cable between the monitor and AUDIO OUT connector of the camera drive unit. External VD/SYNC Signal Signal Level The VD/SYNC IN connector accepts the VD or VS syn- chronizing signal for external synchronization. • VD: 4 V[p-p] / 75 Ω

Composite signal VD signal Composite signal No signal VD signal Composite signal Relation between VD/SYNC IN and VD/SYNC OUT The signal from the VD/SYNC OUT connector differs according to the connected camera and the signal sup- plied to the VD/SYNC IN connector of this unit. The signal supplied from VD/SYNC OUT is as follows: Accuracy of vertical signal Vertical frequency: 59.940052 Hz ± 0.00161 Hz • VS: 1 V[p-p] /75 Ω

Power Consumption: Approx. 16 W Camera Input: 1.0 V[p-p] / 75 Ω, BNC Connector Video Output: 1.0 V[p-p] / 75 Ω, BNC Connector Audio Output: –10 dB / 600 Ωunbalanced, RCA pin jack Camera Power Supply: Regulated current multiplex method (310 mA) Maximum Distance to Camera: Maximum DC Resistance: Between camera and camera drive unit: 20 Ω. VD/SYNC Input: 4.0 V[p-p] /75 ΩNegative going or VS 1 V[p-p] /75 Ω, BNC Connector VD/SYNC Output: 4.0 V[p-p] /75 ΩNegative going, BNC Connector Ambient Operating Temperature: –10 °C – +50 °C (14 °F – 122 °F) Ambient Operating Humidity: Less than 90 % Dimensions: 138 (W) X 44 (H) X 185(D) mm 5-7/16” (W) X 1-3/4” (H) X 7-5/16” (D) Weight: 1.3 kg (2.9 lbs.) Weight and dimensions shown are approximate. Specifications are subject to change without notice. Coaxial DC R/1000 ft. of Maximum Cable Type Inner Conductor Cable Length RG-59/U Less than 30 Ω 200 m (660 ft.) RG-6/U Less than 12 Ω 500 m (1650 ft.)

Division of Matsushita Electric Corporation of America IMAGING SYSTEMS DIVISION Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Northeast: 43 Hartz Way, Secaucus, NJ 07094 (201) 348-7303 Southeast: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30174 (770) 338-6835 Midwest: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200 Southwest: 4500 Amon Carter Blvd., Fort Worth, TX 76155 (817) 685-1117 Western: 6550 Katella Ave. 17A-5, Cypress, CA 90630 (714) 373-7265 MATSUSHITA ELECTRIC OF CANADA LIMITED 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. San Gabriel Industrial Park, 65th Infantry Ave. KM. 9.5 Carolina, Puerto Rico 00630 (809)750-4300 N1096-0 V8QA4372AN Printed in Japan N 30