Sharp XV-Z9000E Operation Manual

MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING XV-Z9000E PROJECTOR PROJEKTOR PROJECTEUR PROJEKTOR PROYECTOR PROIETTORE PROJECTOR

and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/ 336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/ 23/EEG, gewijzigd door 93/68/EEG. Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC. Quest’ apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC come emendata dalla direttiva 93/68/EEC. Η εγκατάσταση αυτή ανταπκρίνεται στις απαιτήσεις των δηγιών της Ευρωπαϊκής Ενωσης 89/336/ΕΚ και 73/23/ΕΚ, #πως ι καννισµί αυτί συµπληρώθηκαν απ# την δηγία 93/68/ΕΚ. Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida pela directiva 93/68/CEE. Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de la 93/68/CEE. Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/ 23/EEC så som kompletteras av 93/68/EEC. Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/ 23/EEC i endringen 93/68/EEC. Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.

Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that you have checked the contents of the carton thoroughly against the list of “Supplied Accessories” on page 12. Before using the projector, please read this operation manual carefully. OPERATION MANUAL ENGLISH Model No.: XV-Z9000E Serial No.: WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. ENGLISH WARNING: Intense light source. Do not look into the beam or view it directly. Be especially careful that children do not look directly into the beam. CAUTION: To reduce the risk of electric shock, do not remove cabinet. No user-serviceable parts are inside. Refer servicing to qualified service personnel. WARNING: The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During normal operation, when turning the power off always use the OFF button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.

See “Replacing the Lamp” on page 47. LAMP REPLACEMENT BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD. HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XVZ9000/1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL. REMPLACEMENT DE LA LAMPE. USER SERVICE SCREWS VIS POUR ENTRETIEN PAR L’UTILISATEUR PRECAUTIONS A OBSERVER LORS DU DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS. L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE. NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XVZ9000/1. RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX. ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN. LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE. A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI. CAUTION WARNING: Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments. Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or discompile the contents thereof.

the first time. Save these instructions for future reference. For your own protection and prolonged operation of your Projector, be sure to read the following “IMPORTANT SAFEGUARDS” carefully, before use. This projector has been engineered and manufactured to ensure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated into this Projector, observe the following basic rules for its installation, use and servicing. 17. Unplug the Projector equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the Projector. c. If the Projector has been exposed to rain or water. d. If the Projector does not operate normally when you follow the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may cause damage and will often require extensive work by a qualified technician to restore the Projector to normal operation. e. If the Projector has been dropped or the cabinet has been damaged. f. When the Projector exhibits a distinct change in performance—this indicates a need for service. 18. When replacement parts are required, be sure the ser- vice technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorised substitutions may result in fire, electric shock, or other hazards. 19. This Projector is provided with one of the following types of plugs. If the plug should fail to fit into the power outlet, please contact your electrician. Do not defeat the safety purpose of the plug. a. Two-wire type mains plug. b. Three-wire grounding type mains plug with a grounding terminal. This plug will only fit into a grounding type power outlet. 1. Unplug the Projector from the wall outlet before cleaning. 2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Do not use attachments not recommended by the Projector manufacturer, as they may cause hazards. 4. Do not use the Projector near water; for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, etc. Never spill liquid into the projector. 5. Do not place the Projector on an unstable cart, stand, or table. The Projector may fall, which may cause serious injury to a child or an adult, and/or serious damage to the unit. 6. Wall or Ceiling Mounting—The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 7. Projector equipment and cart combinations should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn. 8. Slots and openings in the cabinet back and bottom are provided for ventilation. To ensure reliable operation of the Projector and to protect it from overheating, these openings must not be blocked or covered. The openings should never be covered with cloth or other material. 9. This Projector should never be placed near or over a radiator or heating vent. The Projector should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 10. The Projector should be operated only from the type of power source indicated on the back of the projector or in the specifications. If you are not sure of the type of power supplied to your home, consult your Projector dealer or local power company. 11. Do not place the Projector where the cord will be abused by persons walking on it. 12. Follow all warnings and instructions marked on the Projector. 13. To prevent damage to the projector due to lightning and power-line surges, unplug the projector from the power outlet, when not in use. 14. Do not overload wall outlets and extension cords with too many products, because this can result in fire or electric shock. 15. Never push objects of any kind into the Projector through the cabinet slots as they may touch high-voltage points or cause a short circuit. This could result in a fire or electric shock. 16. Do not attempt to service the Projector yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

There is a potential hazard of glass particles if the lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorised Projector Dealer or Service Centre for a replacement. See “Replacing the Lamp” on page 47. Cautions Concerning the Setup of the Projector For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the lens and part of filter must be cleaned more often than usual. As long as the projector is properly maintained in this manner, use in these environments will not reduce the overall operation life. Please note that all internal cleaning must be performed by a Sharp Authorised Projector Dealer or Service Centre. • Do not expose the projector to extreme heat or cold. Operating temperature: +5°C to 35°C Storage temperature: –20°C to +60°C Notes on Operation • The exhaust ventilative hole, the lamp cage cover and adjacent areas may get extremely hot during projector operation. To prevent injury, do not touch these areas until they have sufficiently cooled down. • Allow at least 30 cm of space between the exhaust ventilative hole and the nearest wall or obstruction. • If the cooling fan becomes obstructed, a protection device will automatically turn off the projector lamp. This does not indicate a malfunction. Remove the projector power cord from the wall outlet and wait at least 10 minutes. Then turn on the power by plugging the power cord back in. This will return the projector to the normal operating condition. LAMP REPLACEMENT BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD. HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XVZ9000/1 ONLY. UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING. MEDIUM PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL. REMPLACEMENT DE LA LAMPE. USER SERVICE SCREWS VIS POUR ENTRETIEN PAR L’UTILISATEUR PRECAUTIONS A OBSERVER LORS DU DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS. L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE. NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XVZ9000/1. RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX. ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN. LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE. A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI. CAUTION This label is pasted the side of the projector.

If the projector starts to overheat due to setup problems or a dirty air filter, “TEMP.” and “ ” will flash in the lower-left corner of the picture. If the temperature continues to rise, the lamp will turn off, the TEMPERATURE WARNING indicator on the projector will flash, and after a 90-second cooling- off period the power will shut off. Refer to “Lamp/Maintenance Indicators” on page 45, for details. • The cooling fan regulates the internal temperature, and its performance is automatically controlled. The sound of the fan may change during projector operation due to changes in the fan speed. Lamp Monitor Function When the projector is turned on after the lamp has been used for 1,900 hours, “LAMP” and “ ” will flash in the lower-left corner of the picture to advise you to replace the lamp. See page 47 for lamp replacement. If the lamp has been used for 2,000 hours, the projector power will automatically turn off and the projector will enter standby mode. Refer to “Lamp/Maintenance Indicators” on page 45, for details. Using the Terminal Cover • When ceiling-mounting the projector, attach the terminal cover (supplied) to hide the connecting cables. • Use the terminal cover to hide the connecting cables when the projector is used on a desktop or high mounted. 1 Install the terminal cover using the two attached clips. 2 Attach the terminal cover by aligning with the tab on the projector. PUSH 1 1 1 2 2

The DMD Chip allows for a higher contrast image. Also, as it has an aspect ratio of 16:9, it is possible to view, in the best possible picture frame, software recorded on 16:9 from DVD or DTV. *1 Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. 2. Full 720P Resolution The high resolution panel of 921,600 pixels (1280 × 720 dots) allows for viewing high image quality just as the original as well as HDTV 720P signals. 3. Low Fan Noise A new optical engine has been developed for this product resulting in minimized fan noise for undisturbed viewing. 4. For Use with DTV*2 Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems. *2 DTV is the umbrella term used to describe the new digital television system in the United States. 5. New Progressive Mode and Film Mode Optimizes the image by converting the interlaced signal to the progressive. Useful for displaying slow- moving images or still images. Three modes are available. 6. Advanced Video Circuitry Provides high quality images with minimal dot crawl and cross colour noise. 7. Easy-to-use Graphical User Interface (GUI) A multi-colour, icon-based menu system allows for simple image adjustments. 8. Colour Temperature Adjustment The function can be used to adjust the colour temperature to suit the type of image input to the projector. 9. Gamma Correction Function The gamma value setting can be adjusted according to the input source for optimal image contrast. 10. Brightness Switchover Function Function with toggle switch to control the quantity of projected light. Select “NORMAL” or “BRIGHT” to decrease or increase brightness, power consumption and fan noise. 11. Component Video Input Utilizes a component video input signal (Y, CB, CR). The video signal is input as separate components to provide superior colour and image quality. 12. Direct Computer Compatibility A multi-scan RGB input accepts signals from VGA (640 dots × 480 lines) to SXGA (1,280 dots × 1,024 lines) and Macintosh (from 13" to 21") without the need for any additional hardware.

PDF operation manuals of supplied GAMMA control software “SharpVision Manager” in several languages are included in the CD-ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If you have not installed Acrobat Reader yet, you can download it from the Internet (http:// www.adobe.com) or install it from the CD-ROM. To Install Acrobat Reader from the CD-ROM For other operating systems: Please download Acrobat Reader from the Internet (http://www.adobe.com). For other languages: If you prefer using Acrobat Reader for languages other than those included in the CD-ROM, please download the appropriate version from the Internet. Accessing the PDF Manuals For Windows: 1 Insert the CD-ROM in the CD-ROM drive. 2 Double click on the “My Computer” icon. 3 Double click on the “CD-ROM” drive. 4 Double click on the “acrobat” folder. 5 Double click on the “windows” folder. 6 Double click on the desired installation programme and follow the instructions on the screen. For Macintosh: 1 Insert the CD-ROM in the CD-ROM drive. 2 Double click on the “CD-ROM” icon. 3 Double click on the “acrobat” folder. 4 Double click on the “mac” folder. 5 Double click on the desired installation programme and follow the instructions on the screen. For Windows: 1 Insert the CD-ROM in the CD-ROM drive. 2 Double click on the “My Computer” icon. 3 Double click on the “CD-ROM” drive. 4 Double click on the “MANUALS” folder. 5 Double click on the “SVM_E” folder. 6 Double click on the language (name of the folder) that you want to view. 7 Double click on the “SVM_EE” pdf file to access the SharpVision Manager manual. For Macintosh: 1 Insert the CD-ROM in the CD-ROM drive. 2 Double click on the “CD-ROM” icon. 3 Double click on the “MANUALS” folder. 4 Double click on the “SVM_E” folder. 5 Double click on the language (name of the folder) that you want to view. 6 Double click on the “SVM_EE” pdf file to access the SharpVision Manager manual. • If the desired PDF file cannot be opened by double clicking the mouse, start Acrobat Reader first, then specify the desired file using the “File”, “Open” menu. • See the “readme.txt” file on the CD-ROM for important information on the CD-ROM not included in this operation manual.

Outstanding Features ............................. 6 How to Access the PDF Operation Manuals............................................... 7 Contents................................................... 8 Part Names .............................................. 9 Supplied Accessories ............................. 12 Connections ............................................ 13 Power Supply ............................................ 13 Connecting to Video Equipment ............... 13 Connecting to a Computer ........................ 15 Operating the Remote Control .................. 16 Using as a Wired Remote Control ............. 16 Power ON/OFF .......................................... 17 Zooming and Focusing ............................. 17 Setting Up the Screen ............................. 18 Using the Adjustment Feet ........................ 18 Using the Lens Shift .................................. 18 Keystone Correction .................................. 19 Adjusting the Projection Distance ............. 20 Image Projection ..................................... 22 Rear Projection .......................................... 22 Projection Using a Mirror ........................... 22 Ceiling-mount Projection ........................... 22 Setup & Connections Operation Buttons Setup & Connections Operation Buttons Basic Operation Maintenance & Troubleshooting Appendix Using the Operation Buttons ................. 23 Selecting the Input Signal Source ............. 23 Adjusting the Picture Aspect Ratio............ 23 Gamma Correction Function ..................... 25 Basic Operation Using the GUI (Graphical User Interface) Menu Screen...................... 26 Basic Operations ....................................... 26 Maintenance & Troubleshooting Lamp/Maintenance Indicators................ 45 Lamp Maintenance .................................. 46 Confirming the Lamp Usage Time ............ 46 Replacing the Lamp .................................. 47 Cleaning the Air Filters ........................... 49 Using the Kensington Lock ....................... 49 Troubleshooting ...................................... 50 Appendix Connecting Pin Assignments ................ 51 (RS-232C) Specifications and Command Settings ............................ 52 Wired Remote Control Terminal Specifications..................................... 55 Computer Compatibility Chart ............... 56 Dimensions .............................................. 57 Specifications .......................................... 58 Glossary................................................... 59 Index ......................................................... 60 Menu Bars ................................................. 27 Adjusting the Picture ................................. 29 Adjusting the Computer Images (RGB menu only) ................................. 32 Reducing Image Noise (VIDEO menu only) .............................. 36 Turning On/Off the On-screen Display ...... 37 Setting the Video Signal (VIDEO menu only) .............................. 37 Theatre Mode Functions............................ 38 Selecting a Background Image................. 39 Subtitle Setting .......................................... 40 Selecting the Economy Mode ................... 41 Selecting the Transmission Speed (RS-232C) ............................................ 42 Reversing/Inverting Projected Images ...... 43 Selecting the On-screen Display Language ............................................ 43 Displaying the Adjustment Settings .......... 44

16 18 45 45 45 26 26 26 17 23 23 26 Focus ring Remote control sensor POWER indicator 4 Intake ventilative hole LAMP REPLACEMENT indicator TEMPERATURE WARNING indicator ADJUSTMENT buttons (∂/ƒ/ß/©) UNDO button ENTER button MENU button RESIZE button INPUT button POWER buttons (ON/OFF) Adjuster Zoom knob 18 Adjuster 12 Lens cap 18 17 17 Lens shift dial Side and Rear View Projector Numbers next to the part names refer to the main pages in this manual where the topic is explained.

Side and Rear View 14 13 14 15 4 4 13 Intake ventilative hole Exhaust ventilative hole 16 Remote control sensor 16 AC socket DC 12 V 200 mA OUTPUT terminal Intake ventilative hole 4 15 INPUT 5 COMPUTER-RGB port (15-pin Mini D-sub) INPUT 1 COMPONENT/ RGB terminals (RCA) INPUT 2 COMPONENT/ RGB terminals (RCA) Wired remote control jack VIDEO INPUT 4 terminal (RCA) 13 S-VIDEO INPUT 3 terminal (4-pin Mini DIN) DC 12V OUTPUT RS-232C port (9-pin D-sub)

Wired remote control jack • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • If you will not be using the remote control for a long time, remove the batteries. • Do not mix new and old or different types of batteries. • There are operations that can only be carried out by remote control. Handle the remote control carefully. BACKLIGHT button 17 23 38 25 35 26 26 26 26 23 23 23 23 23 30 19 16 POWER buttons (ON/OFF) ENTER button UNDO button INPUT 1 button INPUT 2 button INPUT 4 button THEATRE MODE button RESIZE button CLR TEMP buttons MENU button ADJUSTMENT buttons (∂/ƒ/ß/©) INPUT 3 button INPUT 5 button AUTO SYNC button GAMMA button KEYSTONE button Inserting the batteries 1 3 Pull down the tab on the battery cover and remove the cover towards the direction of the arrow. 2 Insert two AA size batteries, making sure the polarities match the
and  marks inside the battery compartment. Insert the lower tab of the battery cover into the opening, and press the cover until it clicks in place. Battery cover Battery compartment Battery cover

Two projector operation manuals SharpVision Manager operation manual Power cord (For Europe except U.K.) (For U.K., Hong Kong and Singapore) • The configuration of wall outlets differs from country to country. Use the power cord that corresponds to the wall outlet in your country. For Europe only Computer RGB cable 21 pin RCA conversion adaptor • The RGB cable and 21 pin conversion adaptor are only supplied with European models. Terminal cover Lens cap CD-ROM (SharpVision Manager) Video cable

Power Supply Connecting the Power Cord Plug the supplied power cord into the AC socket on the back of the projector. Connections Power cord CAUTION • Make sure the power cord is firmly connected into the AC socket. • The configuration of wall outlets differs from country to country. Use the power cord that corresponds to the wall outlet in your country. • The projector will enter the stand-by mode after turning the power off and then re-plugging the power cord into the AC socket. However, if you turned off the power by disconnecting the power cord or because of a power failure, the projector will automatically turn on without pressing the POWER ON button. 1 Connect one end of the S-video cable (commercially available) to the INPUT 3 S-VIDEO terminal, or one end of the video cable to the INPUT 4 VIDEO terminal on the projector. 2 Connect the other end of the S-video cable or the video cable to the S-video output or Video output terminal of the video source. The S-video input terminal uses a video signal system where the picture is separated into a colour and luminance signal to realise a higher-quality image. • For higher quality video, you may use the S-video input terminal on the projector. S-video cable is commercially available. • If your video equipment does not have an S-video output terminal, use the composite video output terminal. Connecting a video source (VCR, laser disc player, DVD player or DTV decoder) using the INPUT 3 S-VIDEO and INPUT 4 VIDEO terminals You can connect your projector to a VCR, laser disc player, DVD player, DTV* decoder and other video equipment. * DTV is the umbrella term used to describe the new digital television system in the United States. CAUTION • Make sure to turn both the projector and the video equipment off, before connecting. • As this projector is not equipped with audio input terminals, commercially available audio equipment or your own equipment (such as speakers or amplifiers) should be used. Connecting to Video Equipment

1 2 To S-video output terminal 2 To video output terminal 1 Projector VCR, Laser disc player, DVD player or DTV decoder Connecting to Video Equipment * * 2 To component output terminals 1 Component cable (commercially available) DVD player or DTV decoder 1 Connect each RCA connector of a component cable to the corresponding RCA INPUT 1 or 2 terminals on the projector. 2 Connect the other end of the cable to the corresponding terminals on a DVD player or DTV decoder. When connecting this projector to a DVD player or DTV decoder, select “Component” for “Signal Type” on the GUI menu. (See page 31.) CAUTION • Make sure to turn both the projector and the video equipment off, before connecting. S-video cable (commercially available) Video cable Projector * The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. Connecting a video source (DVD player or DTV decoder) using the RCA INPUT 1 or 2 terminals Connecting to a DTV decoder with analog RGB output 1 Connect each RCA connector to the corresponding RCA INPUT 1 or 2 terminals on the projector. 2 Connect the other end of cable to the corresponding terminals on a DTV decoder. When connecting this projector to analog RGB output of the DTV decoder, select “RGB” for “Signal Type” on the GUI menu. (See page 31). 2 To analog RGB output terminals DTV decoder Projector 1 D-sub/5BNC cable (Commercially available) Five RCA-BNC adaptors (Commercially available) CAUTION • Make sure to turn both the projector and the video equipment off, before connecting.

Connecting to a Computer You can connect your projector to a computer for projection of full colour computer images. Connecting to a computer using the INPUT 5 COMPUTER-RGB port 1 Connect one end of the COMPUTER-RGB cable to the INPUT 5 COMPUTER-RGB port on the projector. 2 Connect the other end of the corresponding port on a computer. CAUTION • Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector on first. The computer should always be turned on last. When connecting this projector to a computer, select “RGB” for “Signal Type” on the GUI menu. (See page 31) Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. When connecting this projector to a computer, select “RGB” for “Signal Type” on the GUI menu. (See page 31) • Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. Connecting RS-232C port When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 52, 53 and 54 for details. Connect an RS-232C cable (null modem, cross type, commercially available) to the serial port on the computer. CAUTION • Do not connect or disconnect an RS-232C cable to or from the computer while it is on. This may damage your computer. • Please read the computer’s operation manual carefully. • Refer to “Computer Compatibility Chart” on page 56 for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions not to work. • The RS-232C function may not operate if your computer port is not correctly set up. Please refer to the operation manual of the computer for details. • The arrows (→, ↔) in the configuration above indicate the direction of the signals. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorised Projector Dealer or Service Centre. RS-232C cable (null modem, cross type, commercially available) 1 2 Computer-RGB cable

Operating the Remote Control The remote control can be used to control the projec- tor within the range shown on the left. • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ due to the screen material. Remote Control Remote Control 45˚ 7 m 30˚ 30˚ 45˚ 30˚ Using the remote control in a dark room The backlights of the operation buttons can be turned on for five seconds and off by pressing BACKLIGHT. If you want to turn off the backlights while they are on, press BACKLIGHT again. BACKLIGHT button Using as a Wired Remote Control When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a 3.5 mm stereo minijack cable (commercially available) from the wired remote control jack on the top of the remote control to the Wired remote control jack on the back of the projector. 3.5 mm stereo minijack cable (commercially available)

Power ON/OFF Press POWER ON. • The flashing blue LAMP REPLACEMENT indicator shows that the lamp is warming up. Wait until the indicator stops flashing before operating the projector. • If the power is turned off and then immediately turned on again, it may take a short while before the lamp turns on. • After the projector is unpacked and turned on for the first time, a slight odour may be emitted from the exhaust ventilative hole. This odour will soon disappear with use. When the power is on, the LAMP REPLACEMENT indicator lights, indicating the status of the lamp. Blue: Lamp is ready. Flashing blue: Warming up. Red: Change the lamp. Press POWER OFF. Press POWER OFF again while the message is displayed. • If you accidentally pressed POWER OFF and do not want to turn off the power, wait until the message disappears. • When POWER OFF is pressed twice, the POWER indicator will light up red and the cooling fan will run for about 90 seconds. The projector will then enter standby mode. • Wait until the cooling fan stops running before disconnecting the power cord. • The power can be turned on again by pressing POWER ON. When the power is turned on, the POWER indicator and the LAMP REPLACEMENT indicators light blue. TEMP. LAMP POWER POWER buttons Projector Remote control Maintenance indicator Zooming and Focusing The picture can be zoomed in or out, and focused by the Zoom knob and the Focus ring. 1 Slide the Zoom knob. The image can be adjusted to the desired size within the zoom range. 2 Rotate the Focus ring until the image on the screen becomes clear. 1 2

Using the Adjustment Feet Setting Up the Screen You can adjust the height of the image by raising the projector with the foot releases. 1 Press the foot releases and lift the projector to the desired angle. 2 Remove your hands from the foot releases. Once the adjustment feet have locked in position, release the projector. 3 If the screen is at an angle, the adjusters can be used to adjust the angle of the image. Returning the projector to its original position While holding the projector, press the foot releases and slowly lower the projector to its original position. CAUTION • Do not hold the lens when lifting or lowering the projector. • When lowering the projector, be careful not to get your fingers caught in the area between the adjustment feet and the projector. • The projector is adjustable up to approximately 5° from the standard position. • When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative positions of the projector and the screen. See page 19 for details on the keystone correction. The picture can be adjusted within the shift range of the lens by rotating the lens shift dial on the top of the projector using your finger. Using the Lens Shift Lens shift dial DOWN UP Projector Projected Image UP DOWN 1 3

Keystone Correction This function can be used to adjust the Keystone settings. 1 Press KEYSTONE on the remote control. 2 Press ENTER to display the test pattern. 3 Press / / / to make adjustments. 4 a. Press KEYSTONE to return to the normal screen. b. To reset the Keystone setting, press UNDO. • Straight lines and the edges of the displayed image may appear jagged, when adjusting the Keystone setting. 3 4b 2 1,4a

Adjusting the Projection Distance Position the projector perpendicular to the screen with all feet flat and leveled to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted. • The projector lens should be centred in the middle of the screen. If the lens centre is not perpendicular to the screen, the image will be distorted, making viewing difficult. • Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out colours, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room. • A polarising screen cannot be used with this projector. Standard Setup (Front Projection) Place the projector at the required distance from the screen according to the desired screen size. (See the tables below.) The figures in the tables are based upon projecting an image so that it occupies the entire screen. The formula for screen size and projection distance • There is an error of ±3% in the formula above. • Values with a minus (–) sign indicate the distance of the lens centre below the bottom of the screen. The formula for screen size and projection distance • There is an error of ±3% in the formula above. • Values with a minus (–) sign indicate the distance of the lens centre below the bottom of the screen. When using a wide screen (16:9) In case of displaying the 16:9 picture on the whole of the 16:9 screen. y1 (Max.) = (0.05058x – 0.0447) × 3.28 y2 (Min.) = (0.03734x – 0.0447) × 3.28 z1 (Upper) = 0 z2 (Lower) = –0.45x Diag. (x) 762 cm (300") 635 cm (250") 508 cm (200") 381 cm (150") 338 cm (133") 269 cm (106") 254 cm (100") 234 cm (92") 213 cm (84") 183 cm (72") 152 cm (60") 102 cm (40") Width 663 cm (261") 554 cm (218") 442 cm (174") 333 cm (131") 295 cm (116") 234 cm (92") 221 cm (87") 203 cm (80") 185 cm (73") 160 cm (63") 132 cm (52") 89 cm (35") Height 373 cm (147") 312 cm (123") 249 cm (98") 188 cm (74") 165 cm (65") 132 cm (52") 125 cm (49") 114 cm (45") 104 cm (41") 89 cm (35") 74 cm (29") 51 cm (20") Maximum (y1) 16.5 m (54'1") 13.7 m (45'1") 11.0 m (36') 8.2 m (26'12") 7.3 m (23'11") 5.8 m (18'11") 5.5 m (17'11") 5.0 m (16'5") 4.6 m (15') 3.9 m (12'10") 3.3 m (10'8") 2.2 m (7'1") Minimum (y2) 12.2 m (39'11") 10.1 m (33'3") 8.1 m (26'7") 6.1 m (19'11") 5.4 m (17'7") 4.3 m (13'11") 4.0 m (13'2") 3.7 m (12'1") 3.4 m (11'1") 2.9 m (9'6") 2.4 m (7'10") 1.6 m (5'2") Upper (z1) 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") Screen size (16:9) Projection Distance (y) Distance from the lens centre to the lower edge of the image (z) Lower (z2) –374 cm (–12'3") –311 cm (–10'3") –249 cm (–8'2") –187 cm (–6'2") –166 cm (–5'5") –131 cm (–4'4") –125 cm (–4'1") –114 cm (–3'9") –105 cm (–3'5") –90 cm (–2'11") –75 cm (–2'5") –50 cm (–1'8") x : Screen size (diag.) y : Projection distance z : Distance from the lens centre to the lower edge of the screen When using a normal screen (4:3) In case of setting the 16:9 picture to the full horizontal width of the 4:3 screen. y1 (Max.) = (0.05510x – 0.04593) × 3.28 y2 (Min.) = (0.04068x – 0.04369) × 3.28 z1 (Upper) = 0 z2 (Lower) = –0.4904x Diag. (x) 635 cm (250") 508 cm (200") 381 cm (150") 254 cm (100") 213 cm (84") 183 cm (72") 152 cm (60") Width 508 cm (200") 406 cm (160") 305 cm (120") 203 cm (80") 170 cm (67") 147 cm (58") 122 cm (48") Height 381 cm (150") 305 cm (120") 229 cm (90") 152 cm (60") 127 cm (50") 109 cm (43") 91 cm (36") Maximum (y1) 12.6 m (41'4") 10.1 m (33') 7.5 m (24'9") 5.0 m (16'5") 4.2 m (13'9") 3.6 m (11'10") 3.0 m (9'10") Minimum (y2) 9.3 m (30'6") 7.4 m (24'4") 5.6 m (18'3") 3.7 m (12'1") 3.1 m (10'2") 2.6 m (8'8") 2.2 m (7'2") Upper (z1) 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") 0 cm (0") Screen size (4:3) Projection Distance (y) Distance from the lens centre to the lower edge of the image (z) Lower (z2) –286 cm (–12'6") –229 cm (–10') –171 cm (–7'6") –114 cm (–5') –96 cm (–4'2") –82 cm (–3'7") –69 cm (–3') x : Screen size (diag.) y : Projection distance z : Distance from the lens centre to the lower edge of the screen z x y 3 4 : Screen area : Picture area 9 16 : Picture area

Adjusting the Projection Distance Upper and Lower Lens Shift Position • This projector is equipped with a lens shift function that lets you adjust the projection height. • Adjust it to match the setup configuration. • The screen can be moved maximum the length of one screen vertically using the lens shift. • Optimal image quality is produced with the projector positioned perpendicular to the screen with all feet flat and level. Tilting or angling the projector will reduce the effectiveness of the lens shift function. Screen size: 254 cm (100 inches) Aspect ratio: 16:9 90° 90° Screen Upper and Lower Lens Shift Position (Ceiling Mount) When the projector is in the inverted position, use the upper edge of the screen as the base line, and exchange the lower and upper lens shift values. Screen Upper lens shift position (High mount setup) Lower lens shift position (Desktop setup) Lens centre Lens centre 90° 90° Screen size: 254 cm (100 inches) Aspect ratio: 16:9 Lower edge of screen (White portion) = Standard (0) point

Rear Projection • Place a translucent screen between the projector and the audience. • Use the projector’s menu system to reverse the projected image. (See page 43 for use of this function.) • Optimal image quality can be achieved when the projector is positioned perpendicular to the screen with all feet flat and leveled. Projection Using a Mirror • When the distance between the projector and screen is not sufficient for normal rear projection, you can use a mirror to reflect the image onto the screen. • Place a mirror (normal flat type) in front of the lens. • Project the normal image onto the mirror. • The image reflected from the mirror is projected onto the translucent screen. CAUTION • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. • It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. • Before mounting the projector, contact your nearest Sharp Authorised Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket (sold separately). (AN-TK202 ceiling-mount bracket, AN-TK201 extension tube, AN-NV6T ceiling adaptors for AN-TK202 or AN-TK201) • When the projector is in the inverted position, use the upper edge of the screen as the base line. • Use the projector’s menu system to select the appropriate projection mode. (See page 43 for use of this function.) Ceiling-mount Projection Image Projection

Using the Operation Buttons Press INPUT on the projector, INPUT 1, INPUT 2, INPUT 3, INPUT 4 or INPUT 5 on the remote control to select the desired input mode. • When no signal is received, “NO SIGNAL” will be displayed. When a signal that the projector is not preset to receive is received, “NOT REG.” will be displayed. On-screen Display Adjusting the Picture Aspect Ratio This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose SIDE BAR, SMART STRETCH, CINEMA ZOOM, STRETCH, NORMAL, or DOT BY DOT image. 1 Press RESIZE. Each time RESIZE is pressed, the picture mode changes as shown on the next page. 2 To return to the standard image, press UNDO while “RESIZE” is displayed on the screen. INPUT buttons 1 2 INPUT 1 Mode INPUT 2 Mode INPUT 5 Mode INPUT 4 Mode INPUT 3 Mode

1280
720 480i 480P NTSC PAL SECAM 960
720 1280
720 480P – – 720P – – 1280
720 1280
720 1280
720 SIDE BAR STRETCH CINEMA ZOOM SMART STRETCH 1280
720 – – 1280
720 1280
720 1080i For 4:3 aspect ratio For 16:9 aspect ratio EXAMPLE VGA SVGA XGA SXGA Input Signal NORMAL Output screen image DOT BY DOT For 4:3 aspect ratio (640
480) For 4:3 aspect ratio (800
600) For 4:3 aspect ratio (1024
768) For 5:4 aspect ratio (1280
1024) 960
720 800
600 SVGA (800
600) NORMAL DOT BY DOT For 4:3 aspect ratio For without 4:3 aspect ratio 960
720 1024
720 XGA (1024
768) 960
720 1280
720 SXGA (1280
960) 900
720 1280
720 SXGA (1280
1024) 480i 480P NTSC PAL SECAM 720P 1080i Input Signal SIDE BAR SMART STRETCH Output screen image STRETCH CINEMA ZOOM For 4:3 aspect ratio Letter box image For 16:9 aspect ratio With squeeze VIDEO/DVD/DTV Adjusting the Picture Aspect Ratio

• Gamma is an image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. • Four gamma settings are available to allow for differences in the images displayed and in the brightness of the room. • When you are displaying images with frequent, dark scenes, such as a film or concert, or when you are displaying images in a bright room, this feature makes the dark scenes easier to see and gives the impression of greater depth in the image. Gamma Modes On-screen Display s s s STANDARD GAMMA 1 GAMMA 2 CUSTOM Gamma mode Selected Mode STANDARD GAMMA 1 GAMMA 2 CUSTOM Standard picture without gamma correction. Brightens darker portions of images for more enhanced presentations. Gives greater depth to darker portions of images for a more exciting theatre experience. Allows you to adjust gamma value using SharpVision Manager (supplied). 1 Press GAMMA to display “GAMMA”. 2 Then, the present Gamma mode is displayed. Each time GAMMA is pressed, the gamma level toggles as shown on the left. 3 To return to the standard image, press UNDO while “GAMMA” is displayed on the screen. • The CUSTOM setting of VIDEO mode optimizes the video source to reproduce the image more beautifully. It darkens bright portions of the image and gives greater depth to darker portions of the image. Select CUSTOM as your default setting if you prefer a smooth textured image to a sharply contrasted one. • STANDARD and GAMMA 2 settings of VIDEO mode (except COMPONENT 480P/720P/1080i) incorporate a DYNAMIC GAMMA function for optimizing GAMMA correction frame by frame in real time, thus providing a more beautiful image. • GAMMA 1 settings are the same for both RGB and VIDEO modes. 3 1,2

(GUI) On-screen Display 1 INPUT 3, 4 (VIDEO) mode 1 INPUT 1, 2 (COMPONENT) or 5 (RGB) mode 4 1 Press MENU to display the INPUT 1, 2, 3, 4 or 5 mode menu bar. 2 Press / to select an adjustment main menu on the menu bar. 3 Press / to select a specific adjustment item. 4 To display a single adjustment item, press ENTER after selecting the item. Only the menu bar and the selected adjustment item will appear. 5 Press / to adjust the item. 6 Press UNDO to return to the previous screen. 7 To exit the GUI, press MENU. • For details on items on the menu screen, see the tree charts on pages 27 and 28. This projector has two sets of menu screens that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector or the remote control with the following procedure. 5 5 2 3 2 3 2 5 1,7 4 6 2,3,5 Main menu Sub menu

Main menu Sub menu Main menu Sub menu Picture Tint
30 30 Color
30 30 Sharp
30 30 Contrast
30 30 Brightness
30 30 Red
30 30 Blue Reset
30 30 CLR Temp Lamp Timer Progressive Mode
3 3 2D Progressive 3D Progressive Film Mode Economy Mode Background [ON/OFF] Auto Power Off RS232C Port [ON/OFF] Options 3D DNR OSD Display [ON/OFF] Video System Normal PAL (50/60Hz) Level A SECAM Level B Auto NTSC3.58 PAL–M PAL–N NTSC4.43 Language English Deutsch Español Nederlands Français Italiano Svenska Português Status Blue None RS-232C 9600bps 115200bps 38400bps Subtitle
30 30 PRJ Mode Front Ceiling
Front Rear Ceiling
Rear * Theater Mode [NORMAL/BRIGHT] * These values may be changed using the RESIZE mode. • Only the items highlighted in the tree charts above can be adjusted. • To adjust the items under the sub menu, press after selecting the sub menu.

Main menu Sub menu Main menu Sub menu Picture PRJ Mode Options Fine Sync Tint
30 30 Color
30 30 Sharp
30 30 Contrast
30 30 Brightness
30 30 Red
30 30 Blue Reset
30 30 CLR Temp Progressive Mode Signal Type
3 3 Component RGB 2D Progressive 3D Progressive Film Mode Auto Sync Clock
150 150
150 150 Auto Sync Disp [ON/OFF] Phase
60 60 H-Pos V-Pos Reset Save Setting Select Setting Special Modes
60 60 Signal Info 1 2 • • 7 Resolution 800600 640480 Resolution 640480 720480 1 2 • • 7 Vert Freq 75 Hz 72 Hz 1 2 • • 7 Resolution 800600 640480 Vert Freq 75 Hz 72 Hz Resolution Hor Freq Vert Freq 640480 37.5 kHz 72 Hz Economy Mode OSD Display Background [ON/OFF] [ON/OFF] Auto Power Off RS232C Port [ON/OFF] Subtitle
30 30 DNR Blue None Normal Level A Level B Language English Deutsch Español Off Normal High Speed Nederlands Français Italiano Svenska Português Status Lamp Timer [ON/OFF] RS-232C *,** * 9600bps 115200bps 38400bps Front Ceiling
Front Rear Ceiling
Rear * Theater Mode [NORMAL/BRIGHT] * Not displayed in the INPUT 5 mode. The “3D” function is not available in INPUT 1, 2 or 5. (Therefore, “DNR” is displayed on the On-screen Display of INPUT 1, 2 or 5.) ** These values may be changed using the RESIZE mode. • The resolution, vertical frequency and horizontal frequency figures displayed above are for example purposes only. • “Color”, “Tint”, and “Sharp” appear only when Component is selected in INPUT 1 or 2 mode. • Only the items highlighted in the tree charts above can be adjusted. • To adjust the items under the sub menu, press after selecting the sub menu.

You can adjust the projector’s picture to your prefer- ences with the following picture settings. Description of Adjustment Items For less contrast For less brightness For less colour intensity Skin tones become purplish For less sharpness For weaker red For weaker blue Selected item For more contrast For more brightness For more colour intensity Skin tones become greenish For more sharpness For stronger red For stronger blue button button All image adjustment items are returned to the factory preset settings. Contrast Brightness Color Tint Sharp Red Blue Reset (GUI) On-screen Display e. g. (VIDEO input in INPUT 3 or 4 mode) 1 2 1,4 2,3 • “Color”, “Tint” and “Sharp” do not appear for RGB input in INPUT 5 mode. 1 Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed. 2 Press / to select a specific adjustment item. 3 Press / to move the mark of the selected adjustment item to the desired setting. 4 To exit the GUI, press MENU. • To reset all adjustment items, select “Reset” on the “Picture” menu screen and press ENTER. • The adjustments can be stored separately in the INPUT 1 to 5 modes.

Adjusting the Colour Temperature This function can be used to adjust the colour temperature to suit the type of image input to the projector (DVD, video, computer image, TV broadcast, etc.). This function can be operated using the CLR TEMP buttons on the remote control, as well as the GUI menu screen. Adjusting the Colour Temperature with the Remote Control 1 Press CLR TEMP (–/+) on the remote control. Then, the present colour temperature level is displayed. 2 Press CLR TEMP (–/+) to change the colour temperature level. • The descriptions of each of the button operations are shown on the table below. • “ ” disappears after four-seconds of no- operation. Adjusting the Colour Temperature using the GUI Menu Screen Description of Colour Temperature 1 Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed. 2 Press / to select “CLR Temp”. 3 Press / to move the mark of the colour temperature setting to the desired setting. 4 To exit the GUI, press MENU. Increases colour temperature for cooler, bluish, florescent-like images. (High colour temperature) Decreases colour temperature for warmer, reddish, incandescent-like images. (Low colour temperature) 3
3 (Red) button button (Blue) 1,2 (GUI) On-screen Display 1,4 2,3 On-screen Display

This function allows you to select the input signal type COMPONENT or RGB for INPUT 1 or 2. 1 Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed. 2 Press / to select “Signal Type”, and then press . 3 Press / to select “RGB” or “Component”. 4 Press ENTER to save the setting. 5 To exit the GUI, press MENU. Adjusting the Picture (GUI) On-screen Display (GUI) On-screen Display Progressive Mode This function allows you to select the progressive display of a video signal. The progressive display projects a smoother video image. 1 Press MENU. Menu bar and “Picture” menu screen appear. GUI operation guide is also displayed. 2 Press / to select “Progressive Mode”, and then press . 3 Press / to select “2D Progressive”, “3D Progressive” or “Film Mode”. 4 Press ENTER to save the setting. 5 To exit the GUI, press MENU. Selects the following progressive conversion mode. 2D Progressive This function is useful to display fast-moving images such as sports and action films. This mode optimizes the image in a displayed frame. 3D Progressive This function is useful to display relatively slow-moving images such as drama and documentary more clearly. This mode optimizes the image by estimating the movement of a number of preceding and succeeding frames. Film Mode Reproduces the image of film software clearly. Displays the optimized image of film transformed with three-two pull down enhancement to progressive mode images. • Film Mode cannot work with PAL 50 Hz. • The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progressive video at 60 frames/second to play back a high-definition image. 4 1,5 2,3 1,5 2,3 4

detailed (tiling, vertical stripes, etc.), interference may occur between the DMD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the optimum computer image. • Computer image adjustments can be made easily by pressing AUTO SYNC ( ) on the remote control. See page 35 for details. (Select the desired computer input mode with INPUT 1 or 2.) 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select a specific adjustment item. 4 Press / to move the mark of the selected adjustment item to the desired setting. 5 To exit the GUI, press MENU. • To reset all adjustment items, select “Reset” on the “Fine Sync” menu screen and press ENTER. • The adjustable area of each item may be changed using the input signal. (GUI) On-screen Display Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centres the on-screen image by moving it to the left or right. Centres the on-screen image by moving it up or down. All computer image adjustment items are returned to the factory preset settings. Clock Phase H-Pos V-Pos Reset Description of Adjustment Items 2 Description Selected item Adjusting the Computer Images (RGB menu only) 3 1,5 2,3,4

Saving and Selecting Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are stored, they can be easily selected each time you connect a computer to the projector. Saving the adjustment setting 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select “Save Setting”, and then press . 4 Press / to select the desired memory location of the setting. 5 Press ENTER to save the setting. 6 To exit the GUI, press MENU. Selecting a saved setting 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select “Select Setting”, and then press . 4 Press / to select the desired memory setting. 5 Press ENTER to select the setting. 6 To exit from the GUI, press MENU. • If a memory position has not been set, the resolution and frequency setting will not be displayed. • When selecting the stored adjustment setting with “Select Setting”, the computer system should match the stored setting. (GUI) On-screen Display 2 3 3 1,6 5 2,3,4

Special Mode Adjustment Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match the computer display mode. 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select “Special Modes”, and then press . 4 Press / to select the optimal resolution. 5 Press ENTER to save the setting. 6 To exit the GUI, press MENU. • Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see.) • When inputting DTV 1080i signal, select the corresponding type of signal in step 4 above. • When inputting 720P RGB signal, select the corresponding type of signal in step 4. (GUI) On-screen Display (GUI) On-screen Display Checking the Input Signal This function allows you to check the current input signal information. 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select “Signal Info” to display the current input signal. 4 To exit the GUI, press MENU. 1,6 5 2,3,4 1,4 2,3

Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing the AUTO SYNC button on the remote control, or automatically by setting “Auto Sync” to “Normal” or “High Speed” in the projector’s GUI menu. Off • Synchronized adjustment is not automatically performed. • Press AUTO SYNC to perform manual adjustment. Normal • Synchronized adjustment is automatically performed the same as the “High Speed” setting. • Adjustment using the “Normal” setting takes longer to perform than using the “High Speed” setting, but it is more accurate. High Speed • The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed. • The Auto Sync adjustment setting previously made is cleared when the projector’s setting is changed. 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select “Auto Sync”, and then press . 4 Press / to select “Normal” or “High Speed”. 5 To exit the GUI, press MENU. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 32.) • When performing AUTO SYNC in off or High Speed mode, if you press AUTO SYNC once, then press it again within one minute, AUTO SYNC will be executed in Normal mode. During Auto Sync adjustment, the On-screen Display changes as shown on the left. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. (GUI) On-screen Display g 1,5 2,3,4 AUTO SYNC button On-screen Display g When “Normal” is selected When “High Speed” is selected

Auto Sync Display Function Normally, an image is not superimposed during Auto Sync adjustment. You can, however, choose to superimpose a background image during Auto Sync adjustment. 1 Press MENU. 2 Press / to select “Fine Sync”. 3 Press / to select “Auto Sync Disp”. 4 Press / to select “ ” to superimpose a background image or “ ” to remove the background image during Auto Sync adjustment. 5 To exit the GUI, press MENU. 2,3,4 1,5 (GUI) On-screen Display Adjusting the Computer Images (RGB menu only) 3D Digital Noise Reduction (3D DNR) provides high quality images with minimal background. 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “3D DNR”. 4 Press / to select “ ” (ON). 5 To exit the GUI, press MENU. • If the image is clear, select “ ” (OFF) to prevent any blurring. • The “3D” function is not available in INPUT 1, 2 or 5. (Therefore, “DNR” is displayed on the On-screen Display of INPUT 1, 2 or 5.) (GUI) On-screen Display 2,3,4 1,5

This function allows you to turn on or off the on-screen messages that appear during input select. 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “OSD Display”, and then press . 4 Press / to select the desired On-screen Display. 5 Press ENTER to save the setting. 6 To exit the GUI, press MENU. (GUI) On-screen Display Setting the Video Signal (VIDEO menu only) The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode if the selected system mode is not compatible with the connected audiovisual equipment. 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “Video Systems”, and then press . 4 Press / to select the desired video system mode. 5 Press ENTER to save the setting. 6 To exit the GUI, press MENU. • When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. • AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL- M and PAL-N input signals. (GUI) On-screen Display Description Selected item Normal Level A Level B Description of OSD Display All On-screen Display are displayed. INPUT and AUTO SYNC are not displayed. All On-screen Display are not displayed (except MENU, KEYSTONE and warning display (Power off, Temp., Lamp etc.)). 1,6 5 2,3,4 1,6 5 2,3,4

Function as a toggle switch for controlling the quantity of projected light. Select “NORMAL” or “BRIGHT” to decrease or increase brightness, power consumption and fan noise. This function can be operated using the THEATER MODE button on the remote control, as well as the GUI menu screen. Description of Theatre Modes Operating the Theatre Mode Function with the Remote Control 1 Press THEATER MODE on the remote control. The present Theatre Mode is displayed. “ ” disappears after four-seconds of no-operation. • “Theatre Mode” is factory preset to “NORMAL” . • When selecting “BRIGHT“ in “Theater Mode”, the fan noise is increased. • Even when selecting “NORMAL” in “Theater Mode“, fan noise may increase if internal temperature rises enough to activate the cooling function. Operating the Theatre Mode Function Using the GUI Menu Screen 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “Theater Mode”. 4 Press / to select “ ” or “ ”. 5 To exit the GUI, press MENU. Quantity of light is 70%. Power consumption is 310 W. Quantity of light is 100%. Power consumption is 345 W. NORMAL ( ) BRIGHT ( ) 1 On-screen Display (GUI) On-screen Display 1,5 2,3,4 Description

(GUI) On-screen Display This function allows you to select the image displayed when no signal is being sent to the projector. Description of Background Images 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “Background”, and then press . 4 Press / to select the background image you want to display on the screen. 5 Press ENTER to save the setting. 6 To exit the GUI, press MENU. Selected item Blue None Description Blue screen Black screen 1,6 5 2,3,4

the display to allow for subtitles. Description of Subtitle Setting 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “Subtitle”. 4 Press / to move the mark of the subtitle setting. 5 To exit the GUI, press MENU. • The RESIZE modes that are available for the Subtitle setting are SMART STRETCH and CINEMA ZOOM only. Please refer to the page 24 for details. • The value of the Subtitle setting may be changed using the INPUT and RESIZE mode. • When changing the screen with the Subtitle setting, not only the bottom of the screen rises up but also the upper side is changed to a certain point. Digital shift When the normal image is projected (without the menu screen or most On-screen Displays* displayed), / can be used to shift the image down or up. Press UNDO to return the image center. * This function does not work when most On-screen Displays are displayed. However, it can be used when “INPUT 1”, “INPUT 2”, “INPUT 3”, “INPUT 4” or “INPUT 5” appears on the screen. • This function only works with certain picture mode displays. (GUI) On-screen Display Subtitle Setting 1,5 2,3,4 Enlarges the image to adjust the vertical size of the display. Compresses the image to adjust the vertical size of the display.
30 30 button button UNDO '/" Press '. Press ". Press UNDO. On the final hole On the final hole. On the final hole.

(GUI) On-screen Display These functions allow you to reduce the power consumption when the projector is in stand-by mode. RS-232C Off Function This projector consumes power when using a computer connected to the RS-232C port. When not using this port, “RS-232C Port” can be set to “ ” for reducing stand-by power consumption. Description of RS-232C Off 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “RS-232C Port”. 4 Press / to select “ ” or “ ”. 5 To exit the GUI, press MENU. • Set “RS-232C Port” to “ ” when using the SharpVision Manager (supplied). 1,5 2,3,4 On-screen Display (GUI) On-screen Display Automatic Power Shut-off Function When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen message on the left will appear five minutes before the power is automatically turned off. Description of Automatic Power Shut-off 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “Auto Power Off”. 4 Press / to select “ ” or “ ”. 5 To exit the GUI, press MENU. • “RS-232C Port” is factory preset to “ ”, and “Auto Power Off” is factory preset to “ ”. Power automatically shuts off after 15 minutes without an input signal. Automatic Power Shut-off disabled. Stand-by power for RS-232C connection turned off. RS-232C on

This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the baud rate. 1 Press MENU. 2 Press / to select “Options”. 3 Press / to select “RS-232C”, and then press . 4 Press / to select the desired baud rate. 5 Press ENTER to save the setting. 6 To exit the GUI, press MENU. • Make sure that both the projector and computer are set for the same baud rate. Refer to the computer’s operation manual for instructions for setting the baud rate. (GUI) On-screen Display 1,6 5 2,3,4

This projector is equipped with a reverse/invert image function which allows you to reverse or invert the pro- jected image for various applications. Description of Projected Images Selected item Front Ceiling
Front Rear Ceiling
Rear Description Normal image Inverted image Reversed image Reversed and inverted image 1 Press MENU. 2 Press / to select “PRJ Mode”. 3 Press / to select the desired projection mode. 4 Press ENTER to save the setting. 5 To exit the GUI, press MENU. • This function is used for the reversed image and ceiling- mount setups. See page 22 for these setups. (GUI) On-screen Display 4 1,5 2,3 Selecting the On-screen Display Language (GUI) On-screen Display English is the preset language for the On-screen Display; however, this can be changed to German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. 1 Press MENU. 2 Press / to select “Language”. 3 Press / to select the desired language. 4 Press ENTER to save the setting. The On-screen Display is now programmed to display in the language selected. 5 To exit the GUI, press MENU. 4 1,5 2,3

This function can be used to display all the adjusted settings on the screen simultaneously. 1 Press MENU. 2 Press / to select “Status”. 3 Press ENTER to display all the adjustment settings. 4 To exit the GUI, press MENU. * The “3D” function is not available in INPUT 1, 2 or 5. (Therefore, “DNR” is displayed on the On-screen Display of INPUT 1, 2 or 5.) 2 3 INPUT 3, 4 (VIDEO) mode 2 3 INPUT 1, 2 (COMPONENT) or 5 (RGB) mode (GUI) On-screen Display 1,4 3 2

• Clogged air filter. • Cooling fan breakdown. • Internal circuit failure. • Burnt-out lamp. • Lamp circuit failure. • Lamp has been used for over 1,900 hours. Maintenance Indicator Condition Possible Solution • Relocate the projector to an area with proper ventilation. • Clean the filters. (See page 49.) • Take the projector to your nearest Sharp Authorised Projector Dealer or Service Centre for repair. • Carefully replace the lamp. (See page 48.) • Take the projector to your nearest Sharp Authorised Projector Dealer or Service Centre for repair. Maintenance Indicators • The warning lights on the projector indicate problems inside the projector. • There are two types of warning lights: a TEMPERATURE WARNING indicator that warns you when the projector is too hot, and a LAMP REPLACEMENT indicator that warns you when to change the lamp. • If a problem occurs, either the TEMPERATURE WARNING indicator or the LAMP REPLACEMENT indicator will light up red. After turning off the power, follow the procedures given below. • If the TEMPERATURE WARNING indicator lights up, follow the above possible solutions and then wait until the projector has cooled down completely before turning the power back on. (At least 5 minutes.) • If the power is turned off and then turned on again, for example during a brief rest, the LAMP REPLACEMENT indicator may be triggered, preventing the power from going on. Should this occur, unplug the power cord from the wall outlet and plug it back in again. TEMPERATURE WARNING indicator POWER indicator LAMP REPLACEMENT indicator LAMP REPLACE- MENT indicator The lamp does not light up. The lamp requires replacement. TEMP. LAMP POWER TEMPERATURE WARNING indicator The internal temperature is abnormally high.

Lamp Maintenance The lamp in this projector operates for approximately 2,000 cumulative hours, depending on the usage environ- ment. (As the usage environment can vary significantly, the projector lamp may not operate for 2,000 hours.) It is recommended that the lamp be replaced after approximately 1,900 cumulative hours of use or when you notice a significant deterioration of the picture and colour quality. The lamp usage time can be checked with the On-screen Display. CAUTION • Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating. This function allows you to check the accumulated lamp usage time. 1 Press MENU. 2 Press / to select “Options”. The lamp usage time will be displayed in the “Lamp Timer” of “Options”. 3 To exit the GUI, press MENU. • It is recommended that the lamp be replaced after approximately 1,900 cumulative hours of use. See page 48 for lamp replacement. (GUI) On-screen Display Problem • Lamp has been used for over 1,900 hours. • Lamp has been used for over 2,000 hours. Possible Solution • Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-XVZ9000/1 from your nearest Sharp Authorised Projector Dealer or Service Centre. • Replace the lamp. (See page 48.) If you wish, you may have the lamp replaced at your nearest Sharp Authorised Projector Dealer or Service Centre. Condition The LAMP REPLACEMENT indicator lights up red, and “LAMP” and “ ” will flash in yellow in the lower-left corner of the picture. A significant deterioration of the picture and colour quality occurs. The power will automatically turn off and the projector will enter stand-by mode. “LAMP” and “ ” will flash in red in the lower-left corner of the picture, and the power will turn off. 1,3 2

It is recommended that the lamp be replaced after approximately 1,900 cumulative hours of use or when you notice a significant deterioration of the picture and colour quality. Carefully change the lamp by following the steps on the next page. If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorised Projector Dealer or Service Centre for repair. Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-XVZ9000/1 from your nearest Sharp Authorised Projector Dealer or Service Centre. Then carefully change the lamp by following the instructions on the next page. If you wish, you may have the lamp replaced at your nearest Sharp Authorised Projector Dealer or Service Centre. CAUTION • There is potential glass particles hazard if the lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorised Projector Dealer or Service Centre for replacement. • Do not remove the lamp cage directly after operation of the projector. The lamp may be extremely hot. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp cage to fully cool down before removing the lamp cage.

• Be sure to remove the lamp cage by the handle. Do not touch the glass surface of the lamp cage or the inside of the projector. • To avoid injury to yourself and damage to the lamp, carefully follow the steps below. • Replace the lamp after turning off the power and unplugging the power cord. Removing and installing the lamp unit CAUTION 4 6 Remove the lamp cage. 5 Insert the new lamp cage. 1 3 Turn off the power. 2 Unplug the power cord. Remove the lamp cage cover. Attach the lamp cage cover. Close the lamp cage cover in the direction of the arrow (to the close mark) on the side of the projector. Then tighten the user service screw. Remove the three-securing screws from the lamp cage. Hold the lamp cage by the handle and pull it horizontally towards you. Loosen the user service screw that secures the lamp cage cover on the side of the projector. Then lower the cover in the direction of the arrow (to the open mark). Press POWER OFF. Wait until the cooling fan stops running. Press the lamp cage firmly into the lamp cage compartment. Fasten the three-securing screws. 7 Plug in the power cord. Press POWER ON on projector to reset lamp timer. While holding down ENTER, " and |, press POWER ON. 8 • You need to reset lamp timer every time when replacing the lamp and confirm it to be reset on “Lamp Timer” menu. 1 2 User service screws User service screws

• Periodically clean the air filter by vacuuming it off with a vacuum cleaner. • The air filter should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dirty or smoky location. How to clean the air filters Side and Rear view Cleaning the Air Filters Air filter Using the Kensington Lock Kensington Security Standard connector This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. Clean the dust off by putting the cleaner hose on the intake ventilative hole of the air filters. Clean the air filters. 2 Unplug the power cord. 1 Side view Air filter Bottom view Cleaner hose Cleaner hose

• Selected input is wrong. (See page 23.) • Cables incorrectly connected to back panel of the projector. (See pages 13–15.) • Remote control batteries have run down. (See page 11.) • “Contrast” and “Brightness” adjustments are set to minimum position. (See page 29.) • “Color” and “Tint” adjustments are not correct. (See page 29.) • Adjust the focus. (See page 17.) • Projection distance is too long or too short to allow for proper focus. (See pages 20 and 21.) • OSD Display is set to “Level A” or “Level B”, preventing to display some or all On-screen Displays. (See page 37.) • If the picture is normal, the sound is due to cabinet shrinkage caused by temperature changes. This will not affect operation or performance. • Refer to “Lamp/Maintenance Indicators” on page 45. • Adjust the “Phase” setting. (See page 32.) • Noise may appear when used with certain computers. Set the NOISE FILTER to ON using the RS-232C command. (See pages 52–54.) • Change the input signal type. (See page 31.) Problem No picture appears. Colour is faded or poor. Picture is blurred. No OSD appears. An unusual sound is occasion- ally heard from the cabinet. Maintenance indicator lights up. Picture noise appears. Image is green on INPUT 1 or 2 COMPONENT. Image is pink (no green) on INPUT 1, 2 RGB.

INPUT 5 RGB Signal Input Port: 15-pin Mini D-sub female connector RGB Input Analog 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Composite sync 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) 9. Not connected 10. GND 11. GND 12. Bi-directional data 13. Horizontal sync signal 14. Vertical sync signal 15. Data clock RS-232C Port: 9-pin D-sub male connector of the DIN-D-sub RS-232C cable 11 6 1 15 10 5 Pin No. Signal Name I/O Reference 1 Not connected 2 RD Receive Data Input Connected to internal circuit 3 SD Send Data Output Connected to internal circuit 4 Reserved Connected to internal circuit 5 SG Signal Ground Connected to internal circuit 6 Reserved Connected to internal circuit 7 Reserved Connected to internal circuit 8 Reserved Connected to internal circuit 9 Not connected 9 6 5 1

PC control A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type, commercially available) to the projector. (See page 15 for connection.) Communication conditions Set the serial port settings of the computer to match those of the table on the next page. Signal format: Conforms to RS-232C standard. Baud rate: 9,600 bps Data length: 8 bits Parity bit: NONE Stop bit: 1 bit Flow control: None Basic format Commands from the computer are sent in the following order: command, parameter, and return code. After the projector processes the command from the computer, it sends a response code to the computer. Return code (0DH) C1 C2 C3 C4 P1 P2 P3 P4 Response code format Normal response O K Return code (0DH) Problem response (communication error or incorrect command) E R R Return code (0DH) Command 4-digits Parameter 4-digits Command format When more than one code is being sent, send each command only after the OK response code for the previous command from the projector is verified. • When using the computer control function of the projector, the projector operating status cannot be read to the computer. Therefore, confirm the status by transmitting the display commands for each adjustment menu and checking the status with the On-screen Display. If the projector receives a command other than a menu display command, it will execute the com- mand without displaying the On-screen Display. Commands EXAMPLE • When “Brightness” of INPUT 1 Picture Adjustment is set to
10. → ← R A B R 1 0 _
O K Projector Computer

CONTROL CONTENTS POWER ON POWER OFF KEYSTONE (
127 — 127) INPUT 1 (COMPONENT 1) INPUT 2 (COMPONENT 2) INPUT 3 (S-VIDEO) INPUT 4 (VIDEO) INPUT 5 (COMPUTER-RGB) AUTO SYNC START INPUT 1 (COMPONENT 1) RESIZE : SIDE BAR INPUT 1 (COMPONENT 1) RESIZE : SMART STRETCH INPUT 1 (COMPONENT 1) RESIZE : CINEMA ZOOM INPUT 1 (COMPONENT 1) RESIZE : STRETCH INPUT 2 (COMPONENT 2) RESIZE : SIDE BAR INPUT 2 (COMPONENT 2) RESIZE : SMART STRETCH INPUT 2 (COMPONENT 2) RESIZE : CINEMA ZOOM INPUT 2 (COMPONENT 2) RESIZE : STRETCH INPUT 3 (S-VIDEO) RESIZE : SIDE BAR INPUT 3 (S-VIDEO) RESIZE : SMART STRETCH INPUT 3 (S-VIDEO) RESIZE : CINEMA ZOOM INPUT 3 (S-VIDEO) RESIZE : STRETCH INPUT 4 (VIDEO) RESIZE : SIDE BAR INPUT 4 (VIDEO) RESIZE : SMART STRETCH INPUT 4 (VIDEO) RESIZE : CINEMA ZOOM INPUT 4 (VIDEO) RESIZE : STRETCH INPUT 5 (COMPUTER-RGB) RESIZE : NORMAL INPUT 5 (COMPUTER-RGB) RESIZE : DOT BY DOT RGB GAMMA : STANDARD RGB GAMMA : GAMMA1 RGB GAMMA : GAMMA2 RGB GAMMA : CUSTOM VIDEO GAMMA : STANDARD VIDEO GAMMA : GAMMA1 VIDEO GAMMA : GAMMA2 VIDEO GAMMA : CUSTOM INPUT 1 (COMPONENT 1) CONTRAST (
30 — 30) INPUT 1 (COMPONENT 1) BRIGHTNESS (
30 — 30) INPUT 1 (COMPONENT 1) RED (
30 — 30) INPUT 1 (COMPONENT 1) BLUE (
30 — 30) INPUT 1 (COMPONENT 1) COLOUR (
30 — 30) INPUT 1 (COMPONENT 1) TINT (
30 — 30) INPUT 1 (COMPONENT 1) SHARP (
30 — 30) INPUT 1 (COMPONENT 1) CLR TEMP (
3 — 3) INPUT 1 (COMPONENT 1) DISPLAY INPUT 1 (COMPONENT 1) ADJUSTMENT RESET INPUT 2 (COMPONENT 2) CONTRAST (
30 — 30) INPUT 2 (COMPONENT 2) BRIGHTNESS (
30 — 30) INPUT 2 (COMPONENT 2) RED (
30 — 30) INPUT 2 (COMPONENT 2) BLUE (
30 — 30) INPUT 2 (COMPONENT 2) COLOUR (
30 — 30) INPUT 2 (COMPONENT 2) TINT (
30 — 30) INPUT 2 (COMPONENT 2) SHARP (
30 — 30) INPUT 2 (COMPONENT 2) CLR TEMP (
3 — 3) INPUT 2 (COMPONENT 2) DISPLAY INPUT 2 (COMPONENT 2) ADJUSTMENT RESET INPUT 5 (COMPUTER-RGB) CONTRAST (
30 — 30) INPUT 5 (COMPUTER-RGB) BRIGHTNESS (
30 — 30) INPUT 5 (COMPUTER-RGB) RED (
30 — 30) INPUT 5 (COMPUTER-RGB) BLUE (
30 — 30) INPUT 5 (COMPUTER-RGB) CLR TEMP (
3 — 3) OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR P P K I I I I I A R R R R R R R R R R R R R R R R R R G G G G G G G G R R R R R R R R R R R R R R R R R R R R R R R R R O O E R R V V R D A A A A B B B B B B B B A A A A C C A A A A A A A A A A A A A A A A A A B B B B B B B B B B C C C C C W W Y G G E E G J S S S S S S S S S S S S S S S S S S M M M M M M M M P B R B C T S C R R P B R B C T S C R R P B R B C R R S B B D D B S R R R R R R R R V V V V V V V V R R R R R R V V V V I R D E O I H T E E I R D E O I H T E E I R D E T _ _ * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * * * * * * _ _ _ * * * * * * * _ _ _ * * * * _ _ _ * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * * * * * * * _ _ * * * * * * * * _ _ * * * * * 1 0 * 1 2 2 1 3 1 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 1 3 1 2 3 4 1 2 3 4 * * * * * * * * 0 1 * * * * * * * * 0 1 * * * * * BUTTONS & REMOTE CONTROL KEY PICTURE COMMAND PARAMETER RETURN CONTROL CONTENTS INPUT 5 (COMPUTER-RGB) DISPLAY INPUT 5 (COMPUTER-RGB) ADJUSTMENT RESET INPUT 1 (COMPONENT 1) SIGNAL TYPE : RGB INPUT 1 (COMPONENT 1) SIGNAL TYPE : COMPONENT INPUT 2 (COMPONENT 2) SIGNAL TYPE : RGB INPUT 2 (COMPONENT 2) SIGNAL TYPE : COMPONENT INPUT 1 (COMPONENT 1) 2D PROGRESSIVE INPUT 1 (COMPONENT 1) 3D PROGRESSIVE INPUT 1 (COMPONENT 1) Film MODE INPUT 2 (COMPONENT 2) 2D PROGRESSIVE INPUT 2 (COMPONENT 2) 3D PROGRESSIVE INPUT 2 (COMPONENT 2) Film MODE INPUT 3 (S-VIDEO) CONTRAST (
30 — 30) INPUT 3 (S-VIDEO) BRIGHTNESS (
30 — 30) INPUT 3 (S-VIDEO) RED (
30 — 30) INPUT 3 (S-VIDEO) BLUE (
30 — 30) INPUT 3 (S-VIDEO) COLOUR (
30 — 30) INPUT 3 (S-VIDEO) TINT (
30 — 30) INPUT 3 (S-VIDEO) SHARP (
30 — 30) INPUT 3 (S-VIDEO) CLR TEMP (
3 — 3) INPUT 3 (S-VIDEO) DISPLAY INPUT 3 (S-VIDEO) ADJUSTMENT RESET INPUT 4 (VIDEO) CONTRAST (
30 — 30) INPUT 4 (VIDEO) BRIGHTNESS (
30 — 30) INPUT 4 (VIDEO) RED (
30 — 30) INPUT 4 (VIDEO) BLUE (
30 — 30) INPUT 4 (VIDEO) COLOUR (
30 — 30) INPUT 4 (VIDEO) TINT (
30 — 30) INPUT 4 (VIDEO) SHARP (
30 — 30) INPUT 4 (VIDEO) CLR TEMP (
3 — 3) INPUT 4 (VIDEO) DISPLAY INPUT 4 (VIDEO) ADJUSTMENT RESET INPUT 3 (S-VIDEO) 2D PROGRESSIVE INPUT 3 (S-VIDEO) 3D PROGRESSIVE INPUT 3 (S-VIDEO) Film MODE INPUT 4 (VIDEO) 2D PROGRESSIVE INPUT 4 (VIDEO) 3D PROGRESSIVE INPUT 4 (VIDEO) Film MODE CLOCK (
150 — 150) PHASE (
60 — 60) H-POSITION (
150 — 150) V-POSITION (
60 — 60) RGB INPUT DISPLAY RGB ADJUSTMENT RESET SAVE SETTING (1 — 7) SELECT SETTING (1 — 7) RGB HORIZONTAL FREQUENCY CHECK RGB VERTICAL FREQUENCY CHECK NORMAL AUTO SYNC HIGH SPEED AUTO SYNC AUTO SYNC OFF AUTO SYNC DISPLAY ON AUTO SYNC DISPLAY OFF OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR kHz (***. *OR_) Hz (***. *OR_) OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR R R I I I I R R R R R R V V V V V V V V V V V V V V V V V V V V V V V V V V I I I I I I M M T T A A A I I C C A A B B A A A B B B B B B B B B B B B B A A A A A A A A A A B B B A A A N N A A A A E E F F A A A M M R R S S S S I I I I I I P B R B C T S C R R P B R B C T S C R R I I I I I I C P H V R R M M R R D D D A A E E I I I I P P P P P P I R D E O I H T E E I R D E O I H T E E P P P P P P L H P P E E S L Q Q J J J S S _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * * * * * _ _ _ _ _ _ _ _ _ _ * _ * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * * * * * * _ _ _ * * * * * * * _ _ _ _ _ _ _ _ _ * * * * _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ * * * * * * * * _ _ * * * * * * * * _ _ _ _ _ _ _ _ * * * * _ _ _ _ _ _ _ _ _ _ _ 0 1 1 2 1 2 0 1 2 0 1 2 * * * * * * * * 0 1 * * * * * * * * 0 1 0 1 2 0 1 2 * * * * 0 1 * * 1 2 1 2 0 1 0 PICTURE FINE SYNC *1 COMMAND PARAMETER RETURN

• If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. • *1 FINE SYNC can only be set in the displayed RGB mode. CONTROL CONTENTS THEATRE MODE NORMAL THEATRE MODE BRIGHT VIDEO 3D DNR OFF VIDEO 3D DNR ON OSD DISPLAY ON OSD DISPLAY OFF (LEVEL A) OSD DISPLAY OFF (LEVEL B) VIDEO SYSTEM SELECTION : AUTO VIDEO SYSTEM SELECTION : PAL VIDEO SYSTEM SELECTION : SECAM VIDEO SYSTEM SELECTION : NTSC4.43 VIDEO SYSTEM SELECTION : NTSC3.58 VIDEO SYSTEM SELECTION : PAL_M VIDEO SYSTEM SELECTION : PAL_N BACKGROUND SELECTION : BLUE BACKGROUND SELECTION : NONE AUTO POWER OFF : NO USE AUTO POWER OFF : USE LAMP USAGE TIME REVERSE OFF REVERSE ON INVERT OFF INVERT ON OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR 0–9999 (INTEGER) OK OR ERR OK OR ERR OK OR ERR OK OR ERR T T 3 3 I I I M M M M M M M I I A A T I I I I H H D D M M M E E E E E E E M M P P L M M M M M M N N D D D S S S S S S S B B O O T R R I I D D R R I I I Y Y Y Y Y Y Y G G W W T E E N N _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 1 0 0 1 1 2 0 1 2 3 4 5 6 7 1 2 0 1 1 0 1 0 1 1 2 3 4 5 6 7 8 9 0 1 OPTIONS PRJ MODE COMMAND PARAMETER RETURN CONTROL CONTENTS LANGUAGE SELECTION : ENGLISH LANGUAGE SELECTION : DEUTSCH LANGUAGE SELECTION : ESPAÑOL LANGUAGE SELECTION : NEDERLANDS LANGUAGE SELECTION : FRANÇAIS LANGUAGE SELECTION : ITALIANO LANGUAGE SELECTION : SVENSKA LANGUAGE SELECTION : LANGUAGE SELECTION : PORTUGUÊS LANGUAGE SELECTION : LANGUAGE SELECTION : OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR OK OR ERR M M M M M M M M M M M E E E E E E E E E E E L L L L L L L L L L L A A A A A A A A A A A _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 1 1 LANGUAGE COMMAND PARAMETER RETURN

Specifications of wired remote control input • ø3.5 mm minijack • External: GND • Internal: +3.3V Function and transmission codes Wired remote control function code 1 0 1 1 0 * * * * * * * * 1 0 C1 System Code C5 C6 Data Code C13 C14 C15 • System codes C1 to C5 are fixed at “10110”. • Codes C14 and C15 are reverse confirmation bits, with “10” indicating “Front” and “01” indicating “Rear”. LSB MSB Sharp remote control signal format Transmission format: 15-bit format Wave form of output signal: Output using Pulse Position Modulation D D D D D D D D D D D D D 67.5 ms 67.5 ms “0” “1” “0” D “0” “0” “0” “1” T0 T1 t t 26.4 µs • t  264 µs • T0  1.05 ms • T1  2.10 ms Transmission control code 15 bit • Pulse carrier frequency  37.91 kHz • Duty ratio  1:1 C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 System Address D to D Common Data Bit Reverse in D Function Key Data Bit Data Expansion Data Deter- mination Mask C15 C1 1 D C2 0 C3 1 C4 1 C5 0 C6 1 C7 0 C8 0 C9 0 C10 0 C11 0 C12 0 C13 0 C14 1 C15 0 C1 1 D C2 0 C3 1 C4 1 C5 0 C6 0 C7 1 C8 1 C9 1 C10 1 C11 1 C12 1 C13 1 C14 0 C15 1 CONTROL ITEM SYSTEM CODE C1 1 1 1 1 1 1 1 1 1 1 ON OFF MENU ∂ ƒ ß © ENTER UNDO THEATRE MODE 0 0 0 0 0 0 0 0 0 0 C2 1 1 1 1 1 1 1 1 1 1 C3 1 1 1 1 1 1 1 1 1 1 C4 0 0 0 0 0 0 0 0 0 0 C5 C6 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 1 1 0 0 C7 1 1 1 1 1 0 1 1 0 0 C8 0 0 0 1 1 0 1 0 1 1 C9 1 1 0 1 1 1 0 1 1 1 C10 C11 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0 1 1 1 1 0 C12 0 1 1 1 1 0 0 0 0 0 C13 1 1 1 1 1 1 1 1 1 1 C14 0 0 0 0 0 0 0 0 0 0 C15 DATA CODE JUDGEMENT CODE JUDGEMENT CODE CONTROL ITEM SYSTEM CODE C1 1 1 1 1 1 1 1 1 1 1 1 RESIZE GAMMA CLR TEMP + CLR TEMP – AUTO SYNC KEYSTONE INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 0 0 0 0 0 0 0 0 0 0 0 C2 1 1 1 1 1 1 1 1 1 1 1 C3 1 1 1 1 1 1 1 1 1 1 1 C4 0 0 0 0 0 0 0 0 0 0 0 C5 C6 0 0 1 1 0 1 0 0 1 0 1 1 0 0 0 1 1 1 1 1 1 0 C7 1 0 1 0 0 1 0 0 1 0 1 C8 1 0 1 1 1 1 1 1 0 0 0 C9 1 0 1 1 1 1 1 1 1 1 1 C10 C11 0 0 1 1 1 1 0 1 1 1 1 1 1 0 1 1 0 0 0 0 0 0 C12 0 0 0 1 1 1 0 0 0 0 0 C13 1 1 1 1 1 1 1 1 1 1 1 C14 0 0 0 0 0 0 0 0 0 0 0 C15 DATA CODE Example of Reverse D to

Horizontal Frequency: 15–81 kHz Vertical Frequency: 43–100 Hz Pixel Clock: 12–120 MHz Compatible with sync on green and composite sync signals SXGA compatible in advanced intelligent compression or intelligent compression AICS (Advanced Intelligent Compression and Expansion System) resizing technology PC/ MAC/ WS Horizontal Frequency (kHz) Vertical Frequency (Hz) VGA PC PC SVGA XGA VESA Standard              Resolution 640  350 1,152  864 1,152  882 720  350 640  400 720  400 640  480 800  600 1,024  768 Display Upscale Advanced Intelligent Compression 27.0 60 27.0 60 27.0 60 60 31.5 70 31.5 70 31.5 70 31.5 60 34.7 70 37.9 72 37.5 75 43.3 85 47.9 53.0 90 100 31.4 50 35.1 56 37.9 60 44.5 70 48.1 72 46.9 75 53.7 85 56.8 90   64.0 100 31.5 70 37.9 85 37.9 27.0 85 37.9 85 26.2 50 PC/ MAC/ WS Horizontal Frequency (kHz) Vertical Frequency (Hz) Resolution Display Advanced Intelligent Compression Advanced Intelligent Compression 54.3 60 67.5 75 75.7 80 65.9 72 54.8 60 67.4 74 45.0 60 VESA Standard SXGA   64.0 60  MAC 16" MAC 21" PC/ MAC 13" PC/ MAC 19" PC (WS) SGI (WS) SUN (WS) 640  480 832  624 Advanced Intelligent Compression Upscale 34.9 1,152  870 68.5 67 60.0 60.0 60 1,024  768 1,280  960 1,280  720 VGA 720P SVGA SXGA SXGA    XGA 48.4 60 75 46.8 75 1,280 1,024 53.5 50 1,152  900 60.9 66 71.9 76 49.6 75 75 64.0 70 64.1 72 35.5 43 40.3 50 58.1 72 68.7 85 73.5 90 77.2 96 80.6 100 56.5 70 Upscale True • This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can be found in your notebook computer’s operation manual. • This projector can receive 640  350 VESA format VGA signals, however, “640  400” will appear on the screen.

57 Appendix Dimensions 406 178 475 Units: mm Front View Bottom View Side View Top View Side View Rear View

S-video input signal Component input signal Horizontal resolution RGB input signal Pixel clock Vertical frequency Horizontal frequency Computer control signal Rated voltage Input current Rated frequency Power consumption Power dissipation Operating temperature Storage temperature Cabinet I/R carrier frequency Dimensions (approx.) Weight (approx.) Supplied accessories Replacement parts Projector XV-Z9000E PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43 DTV 480i/480P/720P/1080i Single Panel Digital Micromirror Device (DMD™) by Texas Instruments, RGB optical shutter method Panel size: 0.8 Drive method: Digital Light Processing (DLP™) by Texas Instruments No. of dots: 921,600 dots (1,280 [H]  720 [V]) 1–1.35 zoom lens, F3.0, f=32.5–44.0 mm 250 W NSH lamp RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 Ω terminated 4-pin Mini DIN connector (INPUT 3) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated RCA Connector (INPUT 1, 2) Y: 1.0 Vp-p, sync negative, 75 Ω terminated CB: 0.7 Vp-p, 75 Ω terminated CR: 0.7 Vp-p, 75 Ω terminated 520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input) 15-PIN MINI D-SUB CONNECTOR (INPUT 5): RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only) VERTICAL SYNC. SIGNAL: Same as above 12–120 MHz 43–100 Hz 15–81 kHz 9-pin D-sub connector (RS-232C Port) AC 100–240 V 3.6 A 50/60 Hz 345 W (SELECTING “BRIGHT” in the “Theatre Mode”) 310 W (SELECTING “NORMAL” in the “Theatre Mode”) 1,400 BTU/hour 5°C to 35°C
20°C to 60°C Plastic 38 kHz 475  178  406 mm (W  H  D) (main body only) 475  178  496 mm (W  H  D) (including terminal cover) 9.5 kg (main body only) Remote control, Two AA size batteries, Power cord (1.8 m), 21-pin RCA conversion adaptor, Video cable, Computer RGB cable, Terminal cover, Lens cap (attached), CD- ROM, Two projector operation manuals, SharpVision Manager operation manual Lamp unit (Lamp/cage module) (BQC-XVZ9000/1), Remote control (RRMCG1657CESA), AA size batteries, Power cord (QACCV4002CEZZ, QACCB5024CENA), 21-pin RCA conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Computer RGB cable (QCNW-5050CEZZ), Terminal cover (GCOVA1985CEKA), Lens cap (PCAPH1056CESA), CD-ROM (UDSKA0047CEN1), Two projector operation manuals (TINS-7521CEZZ, TINS-7522CEZZ), SharpVision Manager operation manual (TINS- 7523CEZZ) This SHARP projector uses a DMD chip. This very sophisticated chip contains 921,600 pixels. As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit. Specifications are subject to change without notice.

and 21 : 9. Auto Sync Optimises projected computer images by automatically adjusting certain characteristics. Background Initial setting image projected when no signal is being input. Cinema zoom Mode that projects the 16:9 image which uses the centre of the image signal on the full-screen. Clock Clock adjustment is used to adjust vertical noise when clock level is incorrect. CLR Temp (Colour temperature) Function that can be used to adjust the colour temperature to suit the type of image input to the projector. Decrease the colour temperature to create warmer, reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture. Composite sync Signal combining horizontal and vertical sync pulses. Digital keystone correction Function to digitally correct a distorted image when the projector is set up at an angle, smoothes out jaggies on keystone images and compresses the image not only horizontally but vertically keeping the 4 : 3 aspect ratio. Digital shift Shifts image up or down easily by / buttons when RESIZE mode of input image is SMART STRETCH, CINEMA ZOOM, or DOT BY DOT of COMPUTER, VIDEO and DTV inputs. Dot by dot Mode that projects images in their native resolution. GAMMA Image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter portions. You can select four different modes : STANDARD, GAMMA 1, GAMMA 2 and CUSTOM. Intelligent compression and expansion High quality resizing of lower and higher resolution images to fit the projector’s native resolution. Lens shift The lens can be easily raised and lowered to minimise or eliminate “Keystone” type effect. Phase Phase shift is a timing shift between isomorphic signals with the same resolution. When phase level is incorrect, the projected image typically displays horizontal flicker. Progressive Mode The progressive display projects a smoother video image. You can select three different modes : 2D Progressive, 3D Progressive and Film Mode. RESIZE Allows you to modify or customise the picture display mode to enhance the input image. You can select six different modes: SIDE BAR, SMART STRETCH, CINEMA ZOOM, STRETCH, NORMAL, and DOT BY DOT. RS-232C Function to control the projector from the computer by using the RS-232C ports on the projector and computer. Side bar Mode that projects the normal 4:3 image at the 4:3 area for the centre of the screen. Smart Stretch Mode that stretches the right and left sides of the 4:3 image horizontally while maintaining the aspect ratio around the centre of the image to display it on the WIDE screen. Status function Displays the settings of each adjustment item. Stretch Mode that stretches the 4:3 image horizontally to display it on the WIDE screen. Sync on green Video signal mode of a computer which overlaps horizontal and vertical sync signal to green colour signal pin. 3D DNR (3D Digital Noise Reduction) Provides high quality images with minimal background.

ADJUSTMENT buttons...................................................... 26 Adjusting the Picture ......................................................... 29 Adjustment feet ................................................................. 18 Air filters ............................................................................ 49 Aspect ratio ....................................................................... 23 Automatic power shutoff function ..................................... 41 Auto sync adjustment ....................................................... 35 AUTO SYNC button........................................................... 35 Auto Sync Display ............................................................. 36 B Background ...................................................................... 39 BACKLIGHT button ........................................................... 16 C Ceiling-mount .................................................................... 22 Ceiling+Rear ..................................................................... 43 CINEMA ZOOM................................................................. 23 Clock ................................................................................. 32 CLR TEMP (Colour Temperature) buttons......................... 30 COMPONENT/RGB terminals ........................................... 14 COMPUTER-RGB port ...................................................... 15 D Digital shift ........................................................................ 40 DOT BY DOT ..................................................................... 23 E Economy Mode ................................................................. 41 ENTER button...................................................................... 9 Exhaust ventilative hole....................................................... 4 F Fine Sync .......................................................................... 32 Focus ring ......................................................................... 17 G GAMMA button ................................................................. 25 GUI (Graphical User Interface)......................................... 26 I INPUT buttons ................................................................... 23 INPUT port ........................................................................ 10 K Kensington Lock ............................................................... 49 KEYSTONE button ............................................................ 19 L LAMP REPLACEMENT indicator ....................................... 45 Lamp Timer ....................................................................... 46 Lens shift ........................................................................... 18 M MENU button..................................................................... 26 O On-screen display............................................................. 37 On-screen display Language ........................................... 43 P Phase ................................................................................ 32 POWER buttons ................................................................ 17 Power cord ........................................................................ 13 POWER indicator .............................................................. 45 PRJ Mode.......................................................................... 43 Progressive Mode ............................................................. 31 R Rear projection................................................................. 22 Remote control ................................................................. 11 Remote control sensor ..................................................... 16 Remote control signal transmitter .................................... 11 RESIZE button .................................................................. 23 RS-232C Off Function ...................................................... 41 RS-232C port ................................................................... 51 RS-232C Transmission Speed ......................................... 42 S Save Setting ..................................................................... 33 Select Setting ................................................................... 33 SIDE BAR ......................................................................... 23 Signal Info ........................................................................ 34 Signal Type ...................................................................... 31 SMART STRETCH ............................................................ 23 Special Mode ................................................................... 34 Status function ................................................................. 44 STRETCH ......................................................................... 23 Subtitle ............................................................................. 40 S-VIDEO INPUT terminal.................................................. 13 SXGA................................................................................ 24 Sync ................................................................................. 35 Sync on green .................................................................. 51 T TEMPERATURE WARNING indicator ............................... 45 THEATER MODE button ................................................... 38 Transmission Speed (RS-232C) ....................................... 42 U UNDO button ................................................................... 26 V VIDEO INPUT terminal ..................................................... 13 Video System ................................................................... 37 W Wired remote control input jack ........................................ 16 Z Zoom knob ........................................................................ 17 No. 3D DNR (3D Digital Noise Reduction) .............................. 36

In Japan gedruckt Imprimé au Japon Triykt i Japan Impreso en Japón Stampato in Giappone Gedrukt in Japan TINS-7521CEZZ XV-Z9000E