Sharp 28LF-94EC Operation Manual

BAREVNÉ TELEVIZE FAREBNÝ TELEVÍZNY PRIJÍMAÈ PREVÁDZKOVÁ PRÍRUÈKA PÓÊÎÂÎÄÑÒÂÎ ÏÎ ÇÊÑÏËÓÀÒÀÖÈÈ ÖÂÅÒÍÎÃÎ ÒÅËÅÂÈÇÎÐÀ CARTE TEHNICà PENTRU TELEVIZOR ÎN CULORI Please read this operation manual carefully before using the colour television. Prosíme pøeètìte si pozornì tento návod k pou ití pøed pou itím barevné televize. Pred pou itím si pozorne preèítajte túto príruèku. Ïðocüáà âíèìàòåëüíî îçíàêîìèòüñÿ ñ íàñòîÿùèì Ðóêîâîäñòâîì ïåðåä âêëþ÷åíèeì òåëåâèçîðà . Gondosan olvassa el a Használati útmutatót, mielõtt használná a színes televíziót. Prosimy uwa¿nie przeczytaæ ten podrêcznik obs³ugi przed rozpoczêciem korzystania z telewizora. Consultati acest manual înainte de a utiliza televizorul color.

Contents Teletext.....................................................................16 To operate Teletext .........................................................16 To select a page of Teletext ............................................16 To Select Index Page .....................................................16 To Select Teletext with a TV Programme .......................16 Searching for a page while watching TV ........................16 To Select Double Height Text .........................................16 To Reveal “concealed” Information ................................16 To Stop Automatic Page Change ...................................16 Split Screen ....................................................................16 To Select a Subcode Page .............................................16 Fastext ...........................................................................16 To exit Teletext ...............................................................17 Connecting external equipment ............................17 Via the Euro connector ...................................................17 RGB mode .....................................................................17 S-VHS EXT2 Mode ........................................................17 Via the ANT (aerial) socket.............................................17 Via the RCA jacks ..........................................................17 TV and Video Recoder (VCR) ........................................17 NTSC Playback ..............................................................17 Copy Facility ...................................................................17 To connect to S-VHS input .............................................17 Connecting Headphones ................................................17 Connecting external equipment ............................18 Typical Connections ...............................................19 Typical Connections (Continued)..........................20 Typical Connections (Continued)..........................21 Typical Connections (Continued)..........................22 Typical Connections (Continued)..........................23 21-pin Euro-SCART and 21-pin Audio/Video........24 Troubleshooting ......................................................25 Specifications..........................................................26 Safety Precautions ................................................... 2 Supplied Accessories............................................... 4 Remote Control Buttons .......................................... 5 Control Panel Buttons .............................................. 6 Antenna Connections ............................................... 6 Preparation ................................................................ 7 Features ........................................................................... 7 Before Switching on your TV .................................. 7 Power connection............................................................. 7 Aerial Connections ........................................................... 7 How to connect external equipment ................................ 7 Remote Control Battery Installation .................................. 7 Switching the TV ON/OFF ........................................ 8 To switch the TV on .......................................................... 8 To switch the TV off .......................................................... 8 Initial Settings ........................................................... 8 Operating with the onset buttons...................................... 8 Operating with Remote Control ........................................ 8 Menu System ............................................................. 9 Sound menu ..................................................................... 9 Picture menu .................................................................. 10 Feature menu ................................................................. 12 Installation Menu ............................................................ 13 Other Features ........................................................ 15 Information On Screen ................................................... 15 Sound Mute .................................................................... 15 Sound Modes ................................................................. 15 Screen Format ............................................................... 15 No-Signal Timer Indicator............................................... 15 Still Picture ..................................................................... 15 To Display the Time ........................................................ 15 Flash back ( ) ............................................................. 15 Double-digit (- / - -) ......................................................... 15 AV Modes ....................................................................... 15

Safety Precautions This equipment complies with the requirements of Direc- tives 89/336/EEC, 92/31/EEC and 73/23/EEC as amended by 93/68/EEC. This receiver should only be operated from a 220-240V AC, 50 Hz outlet. Ensure you select the correct voltage setting for your convenience. AN T. E XT. 2 E XT. 1 Mains Socket Outlet AC 220~240 V, 50 Hz To prevent fire or electrical shock, do not use the TV set in an excessively damp place. Position the TV set out of direct sunlight and away from heat, as high temperatures can damage the cabinet, CRT, or other electronic parts. Do not cover ventilation slots with objects such as newspa- pers, tablecloths, curtains, etc. Do not cover the ventilation holes at the back of the TV set, this can cause fire or other serious problems. Leave an ade- quate open space behind the TV set for good ventilation. In order to ensure that the television is properly ventilated, leave a space of at least 10 cm around the set. Do not install this equipment in a confined space such as a bookcase or a built-in cabinet. Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn. To prevent electrical shock, do not subject the AC power cord to damage by bending or twisting it, or by placing heavy items on top of it and do not place the AC power cord under the TV set. If the AC power cord becomes damaged, unplug it from the wall outlet immediately and call your deal- er for service. Do not place this television equipment on an unstable cart, stand, or table. The television equipment may fall, causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manu- facturer, or sold with the television equipment. Never remove the back of the cabinet, as there is high volt- age in the TV set. Please call for service. When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards.

Unplug the power cord from the wall outlet immediately if the TV set begins to make unusual noises or give off smoke or an odd smell, then call your dealer for service. Always disconnect your television from the mains and the aerial cables during thunderstorms. Even if your television is switched off, it can still be dam- aged by lightning striking the mains and/or aerial cable. Do not leave your TV set in Stand-by or operating mode when you leave the house. In order to prevent electrical shocks and fires, ensure that the television is not subjected to splashes or spills of wa- ter, and avoid inserting objects or pouring any type of liquid into the set. To prevent fire, never place any type of candle or naked flames on the top or near the TV set. If an object or liquid enters the set, disconnect the mains supply and contact technical service. Wall or shelf mounting should follow the manufacturer’s in- structions, and should use a mounting kit approved by the manufacturer. Do place the TV set onto an even stand, table or track which size is bigger than the TV set. If the TV set is put onto a smaller size or uneven stand, ta- ble or track may cause the TV cabinet distort. Do not put or insert anything between TV set and the stand, table or track. The tube of your TV has a special coating. Do not knock or rub on the tube face with sharp or hard surfaces, otherwise you will damage the coating. To prevent damaging the surface of the television screen, remove finger prints only with a soft cloth dampened with glass cleaner. Do not use any abrasive cleaners. Do not use thinner, benzene or other strong chemical clean- ers. Warning! Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture tube may lead to an increased concentra- tion of x-rays. Any television modified in this way no longer complies with license and must not be operated. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children. Batteries, including those which are heavy metal-free, should not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area. CAUTION: For environmental and safety reasons, it is recommended that this television set is not left in stand-by mode whilst not in use. Switch it off using the main switch. During periods of absence from home it is also wise to disconnect the set by unplugging the mains plug.

Supplied Accessories Remote control Operation Manual 28LF-94EC 32LF-94EC COLOUR TELEVISION OPERATION MANUAL INSTRUKCJA OBSŁUGI TELEWIZORA KOLOROWEGO SZÍNES TELEVÍZIÓKÉSZÜLÉK KEZELÉSI ÚTMUTATÓ NÁVOD K POUŽITÍ BAREVNÉ TELEVIZE FAREBNÝ TELEVÍZNY PRIJÍMAČ PREVÁDZKOVÁ PRÍRUČKA PУКОВОДСТВО ПО ЗКСПЛУАТАЦИИ ЦВЕТНОГО ТЕЛЕВИЗОРА CARTE TEHNICĂ PENTRU TELEVIZOR ÎN CULORI Please read th is operation manual carefully before using the colour television. Prosíme p řečtěte si po zorn ě tento návod k použití před použitím barevné televize. Pred použitím si pozorne prečítajte túto príru čku. Пр ocьб а внимательн о ознакомить ся с настоящим Руководством перед включ ениeм телевизора . Go ndo san olvassa el a Használati útmutatót, mielőtt használná a színes televíziót. Prosimy uw ażnie przeczytać ten podręcznik obsługi przed rozpoczęciem korzystania z telewizora. Co nsultati acest m anual înainte de a utiliza televizorul color. + + Respect the environment and put used batteries in a container that is especially designed for this purpose. Type-(R03 AAA) Dry Batteries

Remote Control Buttons CAUTION RISK OF ELECTRIC SHOCK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock of persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 = Stand By = Cursor Up = Cursor Right OK = Store / Still Picture = Info (Program Table) 0 - 9 = Direct Program - / - - = Double Digit = Screen Format button P/CH+ = Program Up + = Volume Up = TV / Quit Menu EXT = EXT button (EXT-1, EXT-2, S-VHS, S-VHS EXT2 or FRONT-AV) Yellow = Feature Menu Blue = Installation Menu = Hold 16 = Update = Index Page = Reveal = Expand = Mix 21 = Teletext = Time 23 Red = Sound Menu Green = Picture Menu = Mute I-II = Mono/Stereo - Dual I-II - = Volume Down - P/CH = Program Down = Flash back button 30 M = Menu 31 = Cursor Down 32 = Cursor Left

Control Panel Buttons Antenna Connections VIDEO AUDIO L (L/S/G/I) = Audio left AUDIO R (R/D/D/D) = Audio right = Headphone 3,6 mm Ø Speakers (left + right) = Power On / Off = Volume -/+ CH = Program -/+ S-VIDEO CH CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO FRONT PANEL

Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. “Use this apparatus in tropical and moderate climates.” Features • Remote Control Color Television • 100 UHF / VHF / Cable channel presets • Cable Channel Compatible • Menu Driven functions • 2 Euro connector Sockets • Front AV sockets • Front S-VHS connector • German+Nicam Stereo • Full function teletext (Fastext) • Direct Channel access • APS (Automatic Programming system) Tuning • Program custom name feature • Automatic search tuning • Sleep Timer • Child lock • Blue mute on no video signals • Audio mute on no video signals • Auto switch off after 5 mins of no signal • WSS (wide screen signal decoding) • NTSC playback • Headphone • Split Screen (Picture and Text) • CTI (Color Transient Improvement) • Automatic VCR detection • Simple 100 Hz. Before Switching on your TV Power connection Important: The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Aerial Connections • Connect the aerial plug to the aerial input socket located at the back of the TV. How to connect external equipment See “Connecting external equipment” on page 18. • See the instruction manuals provided with the external de- vices too. Remote Control Battery Installation Before using the TV set for the first time, install the supplied dry batteries in the remote control. 1. With your thumb nail, pull up the slit as indicated by the arrow to remove the battery cover. 2. Insert two batteries 1.5 V (R03 AAA size). Be sure to match the battery +/- terminals with the +/- marks inside the compartment. + + 1,5 V. (AAA R03) 3. Replace the battery cover. Notes: • Remove batteries if weak or if the unit is not in use for long periods. • Do not mix old and new batteries. • Incorrect installation of the batteries may damage the re- mote control.

Switching the TV ON/OFF You can operate your TV either using the remote con- trol handset or directly using the TV onset buttons. To switch the TV on Your TV will switch on in two steps: 1- Press the power button located on the front of the TV. Then the TV switches itself to standby mode and the RED LED located below the TV turns on. 2- To switch on the TV from stand-by mode either: Press a digit button or stand-by button on the remote control so that a programme number is selected, or, Press Power Button and “P/CH+” or “-P/CH” buttons on the TV or on the remote control respectively, so the TV will switch on and the RED Led will turn GREEN. To switch the TV off • Press the stand-by button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will be- come RED, or, • Press the power button located on the front of the TV. Initial Settings The message “PLEASE CHECK ANTENNA CABLE!” will be displayed when you turn on your TV for the first time. PLEASE CHECK ANTENNA CABLE! LANGUAGE ENGLISH COUNTRY SPAIN START TV CANCEL EXECUTION APS Note: If you connect Video Recorder to your TV via antenna input (ANT socket); to tune the VCR channel automatically you must set the VCR in play mode before you start APS. (Please use a PAL / SECAM Video Cassette). 1- Select LANGUAGE with “ ” or “ ” button, then press the “ ” or “ ” button to select a menu language. 2- Select COUNTRY with “ ” or “ ” button, then press the “ ” or “ ” button to select the correct country. 3- Select START with “ ” or “ ” button, then press the “ ” button to start APS. APS, (Automatic Programming System) automatically pro- grammes the received channels in your TV’s programme numbers. During APS, “APS IS RUNNING PLEASE WAIT” message will be displayed. After APS is finalized, the “PRO- GRAM TABLE” appears. To cancel APS, press the “ ” button. EXECUTION APS APS IS RUNNING, PLEASE WAIT! PROGRESS 35% CHANNEL TV CANCEL - - - - - 11 12 13 14 15 16 17 18 19 20 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 - - - - - 22 - - - - - 23 - - - - - 24 - - - - - 25 - - - - - 26 - - - - - 27 - - - - - 28 - - - - - 29 - - - - - 30 - - - - - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 3 4 5 6 7 - - - - - 8 9 10 - - - - - - - - - - - - - - - change delete TV i EXIT / Moving cursor to four direction you can reach 30 pro- grammes in the same page. By scrolling the pages up or down by pressing the navigation buttons you can select all the programmes. By cursor action, programme selection is done automatical- ly. Programme Number is between 1 and 99. Programme Name has a name string with 5 characters. After autostore process the Programme Names are set to: • Channel search "C-01" or "S-01" (band and channel num- ber) or name of the tuned channel if defined. Change: This function is used to change the places of the pro- grammes in Program Table. Select the programme you want to move and press BLUE button. Selected programme will be highlighted. Move the cursor to desired program place and press BLUE button again. Delete: Select the programme you want to delete and press RED button. The programme will be deleted from the Program Table without any warning. • "delete" string becomes green while the selected channel is being deleted from the Program Table. • Press “ ” or “ TV ” button to exit Program Table. Operating with the onset buttons Volume setting and programme selection can be made us- ing the buttons on the front of the TV. Volume Setting: • Press “ ” button to decrease volume or “ ” button to increase volume, so a volume level scale will be dis- played on the screen. Programme Selecting: • Press “CH ” button to select next programme or “ CH” button to select the previous programme. Operating with Remote Control The remote control handset of your TV is designed to control all the functions of the model you selected. The functions will be de- scribed in accordance with the menu system of your TV. Functions which you can use out of menu system are de- scribed below.

Volume Setting: Press “ +” button to increase volume. Press “- ” button to decrease volume. Programme Selecting (Previous or next programme): • Press “-P/CH” button to select the previous programme. • Press “P/CH+” button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected program after a short delay. • For a two digit program number press “- / - -” button. Press the first digit and then second digit of the programme channel you want to watch. Menu System Your TV has been designed with a menu system to provide an easy manipulation of a multifunction system. "M" button has two functions. The first function of it is open and close the menu, the second function is closing the submenu and then opening its parent menu. The short way in order to en- ter the menus, press: “M” button Menu Red button Sound menu Green button Picture menu Yellow button Feature menu Blue button Installation menu “ ” button Program Table When you press "M" button, the following menu appears on the screen. Press “ ” or “ ” button to select a menu title and then “ ” or “OK” button to enter the menu. Sound menu First icon belongs to the sound menu. By pressing “ ” or “OK” button, Sound menu appears on the screen. You can enter Sound menu directly by pressing RED button. Volume When you entered the sound menu Volume will be the first selected item. Press “ ” button to increase volume level. Press “ ” button to decrease volume level. SOUND VOLUME BALANCE SOUND MODE MONO SURROUND MODE OFF BASS Balance By pressing “ ” or “ ” button, select Balance. Press “ ” button to move headphone balance rightward. Press “ ” but- ton to move headphone balance leftward. SOUND VOLUME BALANCE SOUND MODE MONO SURROUND MODE OFF BASS Sound Mode By pressing “ ” or “ ” button, select Sound Mode. You can change the sound mode to MONO, STEREO (NICAM STE- REO), DUAL 1 (NICAM 1) or DUAL 2 (NICAM 2) by press- ing “ ” or “ ” button.

SOUND VOLUME BALANCE SOUND MODE MONO SURROUND MODE OFF BASS Surround Mode By pressing “ ” or “ ” button, select Surround Mode. You ou can change the surround mode to *INCR. STEREO, INCR. MONO or OFF by pressing “ ” or “ ” button. * INCR.: Incredible SOUND VOLUME BALANCE SOUND MODE MONO SURROUND MODE OFF BASS Bass By pressing “ ” or “ ” button, select Bass. Press “ ” but- ton to increase Bass level. Press “ ” button to decrease Bass level. SOUND VOLUME BALANCE SOUND MODE MONO SURROUND MODE OFF BASS Treble By pressing “ ” or “ ” button, select Treble. Press “ ” but- ton to increase Treble level. Press “ ” button to decrease Treble level. SOUND BASS AVL OFF TREBLE HEADPHONE SURROUND MODE OFF Headphone Menu By pressing “ ” or “ ” button, select Headphone. Press “ ” button to enter Headphone menu. Volume By pressing “ ” or “ ” button, select Volume. Press “ ” button to increase headphone volume level. Press “ ” but- ton to decrease headphone volume level. HEADPHONE VOLUME BALANCE SOUND MODE MONO Balance By pressing “ ” or “ ” button, select Balance. Press “ ” button to move headphone balance rightward. Press “ ” but- ton to move headphone balance leftward. Sound Mode By pressing “ ” or “ ” button, select Sound Mode. You can change the sound mode to MONO, STEREO (NICAM STE- REO), DUAL 1 (NICAM 1) or DUAL 2 (NICAM 2) by press- ing “ ” or “ ” button. AVL Automatic Volume Limiting (AVL) function normalizes sound to obtain fixed output level between programs, having differ- ent sound levels. Pressing “ ” or “ ” button will turn ON or OFF this feature. SOUND BASS AVL OFF TREBLE HEADPHONE SURROUND MODE OFF To Store the Settings • Press “OK” button to store Sound menu settings. • “STORED” will be displayed at the bottom of the menu. Picture menu By pressing “ ” or “ ” button, select the second icon. By pressing “ ” or “OK” button, Picture menu appears on the screen. You can enter Picture menu directly by pressing GREEN button. Setting Brightness When you entered the Picture menu Brightness will be the first selected item. Press “ ” button to increase Brightness level. Press “ ” button to decrease Brightness level. PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TILT Setting Contrast • Using “ ” or “ ” button select Contrast. • Press “ ” button to increase contrast level. • Press “ ” button to decrease contrast level.

PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TILT Setting Color • Using “ ” or “ ” button select Color. • Press “ ” button to increase color level. • Press “ ” button to decrease color level. PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TILT Setting Sharpness • Using “ ” or “ ” button select Sharpness. • Press “ ” button to increase sharpness level. • Press “ ” button to decrease sharpness level. PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TILT Setting Tilt • Using “ ” or “ ” button select Tilt. • Press “ ” button to increase tilt level. • Press “ ” button to decrease tilt level. PICTURE BRIGHTNESS CONTRAST COLOR SHARPNESS TILT Setting Tint This item is used to change the Colour Temperature. By pressing “ ” or “ ” button you may select one of these op- tions: COOL, WARM, NORMAL. PICTURE TILT SCREEN FORMAT PICTURE SMART NORMAL AUTO PERSONAL TINT SHARPNESS Setting Hue (In AV mode only) (During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu.): • Using “ ” or “ ” button select Hue. • Press “ ” button to increase hue level. • Press “ ” button to decrease hue level. PICTURE TINT SCREEN FORMAT PICTURE SMART NORMAL AUTO PERSONAL HUE TILT Screen Format By pressing “ ” or “ ” button, select Screen Format. You ou can change the screen format to AUTO, NORMAL, FULL, 14:9, CINEMA, PANORAMA or SUBTITLE by pressing “ ” or “ ” button. PICTURE TILT SCREEN FORMAT PICTURE SMART NORMAL AUTO PERSONAL TINT SHARPNESS Screen Format can be set by “ ” button also. If “ ” button is pressed once, Screen Format indicator ap- pears on the screen. Each time you press the “ ” button, the width of the pic- ture changes as indicated: AUTO* NORMAL FULL 14:9 CINEMA PANORAMA SUBTITLE When you select 14:9, CINEMA, PANO or SUBTIT you can change the vertical scroll by pressing “ ” / “ ”. * Auto mode (WSS data): The WSS data is sent by some broadcasting stations with information of the original size. When the TV is in AUTO mode and receives the WSS data, it changes the size automatically as indicated below: When the TV is receiving WSS data 16:9 the TV selects CINEMA automatically. When the TV is receiving WSS data 14:9 the TV selects 14:9 automatically. When the TV is receiving WSS data 4:3 the TV selects NORMAL automatically. When the TV does NOT receive WSS data the TV selects FULL automatically. External source: When you are watching the TV set through the Euro-SCART EXT.1 terminal and it receives in- formation of 16:9 format (through the audio-video control pin) the TV selects FULL automatically.

Screen Format (Special detail information) Special detail information about AUTO, NORMAL, FULL, 14:9, CINEMA, PANORAMA and SUBTITLE. NORMAL You can watch 4:3 programs in 4:3 format by switching to NORMAL Mode function. FULL With Full Mode you adapt the picture 16:9 format while also stretching the centre of view. This is an advantage, for ex- ample, when watching sports games where there is no real fixed centre of the picture. 14:9 ( ) Adapts the 14:9 broadcast cinema movies to the 14:9 Mode. CINEMA ( ) Adapts the 16:9 broadcast cinema movies to the 16:9 Mode, thereby getting rid of the black borders. PANORAMIC ( ) This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the pic- ture appear unnatural. • The top and bottom of the picture are slightly cut off. SUBTITLE ( ) Adapts up to the wide picture (16:9 aspect ratio) with subtitle to the full screen. SUBTITLE Adjusting the visible area of the picture: If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1. Press “ ” button once. The SCREEN FORMAT indicator appears. The SCREEN FORMAT will not be changed. 2. While it is displayed, press “ ” or “ ” to change the po- sition of the picture. AUTO FORMAT NORMAL FORMAT FULL FORMAT 14:9 FORMAT CINEMA FORMAT PANO FORMAT SUBTIT FORMAT • You cannot adjust the visible area in NORMAL or FULL mode. Picture Smart By pressing “ ” or “ ” button, select Picture Smart. You ou can change the picture smart to PERSONAL, RICH, NATU- RAL or SOFT by pressing “ ” or “ ” button. PICTURE TILT SCREEN FORMAT PICTURE SMART NORMAL AUTO PERSONAL TINT SHARPNESS To Store the Settings • Press “OK” button to store Picture menu settings. • “STORED” will be displayed at the bottom of the menu. Feature menu By pressing “ ” or “ ” button select the third icon. By pressing “ ” or “OK” button, Feature menu appears on the screen. You can enter Feature menu directly by pressing YELLOW button. Sleep Timer As you enter the Feature menu, Sleep Timer will be the first selected option. Use “ ” or “ ” button to change the Sleep

Timer values between OFF, 15 MIN, 30 MIN, 45 MIN, 60 MIN, 90 MIN, 120 MIN, 150 MIN and 180 MIN. If sleep timer is activated, at the end of the selected the time, the TV goes automatically to stand-by mode. FEATURE SLEEP TIMER OFF OFF OFF TV CHILD LOCK BLUE SCREEN EXT2 OUTPUT Child Lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. without remote con- trol. The Child Lock feature can be set by “ ” or “ ” button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Power On/ Off button) will not work. FEATURE SLEEP TIMER OFF OFF OFF TV CHILD LOCK BLUE SCREEN EXT2 OUTPUT While the CHILD LOCK is ON, pressing any of the front/ right panel buttons (except Power on/off button) causes the warning menu to appear on the middle of the screen. CHILD LOCK Blue Screen In case, no valid signal is detected (in TV or AV mode) Blue Screen is activated. During search process Blue Screen is not active. The Blue Screen feature can be set by “ ” or “ ” button to either ON or OFF. FEATURE SLEEP TIMER OFF OFF OFF TV CHILD LOCK BLUE SCREEN EXT2 OUTPUT EXT2 Output • You can use this menu to select the internal or external source that will be output at EXT.2 terminal. • In the “Feature” menu select “EXT2 Output” using “ ” or “ ” button. Then select the source you want to be output at EXT.2 pressing “ ” or “ ” button (one of the sources: TV, EXT-1, FRONT-AV or SCREEN. FEATURE SLEEP TIMER OFF OFF OFF TV CHILD LOCK BLUE SCREEN EXT2 OUTPUT To Store the Settings • All settings are stored automatically in Feature menu. There is no need to press “OK” button. Installation Menu By pressing “ ” or “ ” button, select the fourth icon. By pressing “ ” or “OK” button, Installation menu appears on the screen. You can enter installation menu directly by pressing BLUE button. INSTALLATION LANGUAGE ENGLISH COUNTRY TXT LANGUAGE UK WEST EUROPE PROGRAMMING EXECUTION APS Language By pressing “ ” or “ ” button, select Language. You can select the language by pressing “ ” or “ ” button. Country By pressing “ ” or “ ” button, select Country. You can se- lect the country by pressing “ ” or “ ” button. Txt Language By pressing “ ” or “ ” button, select Txt Language. You ou can select the Teletext Language by pressing “ ” or “ ” button. The options are WEST EUROPE, EAST EUROPE, GREEK - TURKEY and RUSSIAN. WEST EUROPE EAST EUROPE GREEK-TURKEY RUSSIAN ENGLISH FRENCH ENGLISH CZECH/SLOVAK FRENCH SWEDISH FRENCH GERMAN/DUTCH SWEDISH FINNISH SWEDISH RUSSIAN FINNISH DANNISH FINNISH LITHUANIAN DANNISH CZECH/SLOVAK DANNISH LETTISH CZECH/SLOVAK GERMAN/DUTCH GERMAN/DUTCH UKRANIAN GERMAN/DUTCH ITALIAN PORTUGUESE ESTONIAN PORTUGUESE HUNGARIAN SPANNISH BULGARIAN SPANNISH POLISH ITALIAN ITALIAN SLOVENIAN HUNGARIAN HUNGARIAN RUMANIAN TURKISH ICELANDIC CROATIAN GREEK NORWEGIAN ICELANDIC Programming By pressing “ ” or “ ” button, select Programming. You ou can enter the programming menu by pressing “ ” button. PROGRAMMING PROGRAM 12 COLOR NORM AUTO STANDARD BG SEARCH FINE TUNING 0

Program By pressing “ ” or “ ” button, select Program. By pressing “ ” / “ ” or digit buttons, you can select the program num- ber. There are 100 program storage between 0 and 99. Color Norm By pressing “ ” or “ ” button, select Color norm. By press- ing “ ” or “ ” button, you can change the standard to AUTO, PAL or SECAM. Standard By pressing “ ” or “ ” button, select Standard. By pressing “ ” or “ ” button, you can change the standard to BG, L, I or DK. Search By pressing “ ” or “ ” button, select Search. By pressing “ ” button, you can enter Search menu. SEARCH SEARCH CHANNEL 00 BAND C If you can not tune to a channel, try APS. Search By pressing “ ” or “ ” button, select Search. By pressing “ ” button, you can start Search. When you start the chan- nel searching “SEARCHING…” is written and when a chan- nel was found which has been searched, “FOUND” is writ- ten across the SEARCH item in the menu above. When word “FOUND” it appears, is not possible to select “CHANNEL” or “BAND” by pressing the “ ” or “ ” button. Press “M” button to select these items. Channel By pressing “ ” or “ ” button, select Channel. By pressing “ ” / “ ” or digit buttons, you can change the channel num- ber. Band By pressing “ ” or “ ” button, select Band. By pressing “ ” or “ ” button, you can change the Band to C or S. To Store the Settings • Press “OK” button to store Search menu settings. • “STORED” will be displayed. To exit the Search menu, press “M” button. Fine Tuning By pressing “ ” or “ ” button, select Fine Tuning. By pressing “ ” or “ ” button, you can fine tune the program manually. PROGRAMMING NAME - - - - - COLOR NORM AUTO STANDARD BG SEARCH FINE TUNING 0 Name By pressing “ ” or “ ” button in Programming menu, se- lect Name. You can change the program name. When you select the Name, cursor is on the first letter. By using “ ” or “ ”‚ buttons you can select the letter. By pressing “ ” or “ ” button, you can move the cursor to second or third letter of the program name. Name can be 5 digit length. To Store the Settings • Press “OK” button to store Programming menu settings. • “STORED” will be displayed at the bottom of the menu. • Press “M” button to exit programming menu. Execution APS: By pressing “ ” or “ ” button, select Execution APS in In- stallation menu. By pressing “ ” button, you can enter Exe- cution APS menu. EXECUTION APS ALL PROGRAMS WILL BE CLEARED! OK START TV CANCEL If you want to cancel APS, press “ ” button, you return to Installation menu. If “OK” button is pressed, APS function starts and the following menu comes to the screen. APS IS RUNNING, PLEASE WAIT! PROGRESS 35% CHANNEL TV CANCEL - - - - - EXECUTION APS After APS is completed, the PROGRAM TABLE is dis- played. 11 12 13 14 15 16 17 18 19 20 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 - - - - - 22 - - - - - 23 - - - - - 24 - - - - - 25 - - - - - 26 - - - - - 27 - - - - - 28 - - - - - 29 - - - - - 30 - - - - - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 3 4 5 6 7 - - - - - 8 9 10 - - - - - - - - - - - - - - - change delete TV i EXIT / • Press “ ” or “ TV ” button to exit Program Table. Note: To enter PROGRAMME TABLE directly, press “ ” button. • See Page 8 Program Table explanation.

Other Features Information On Screen Programme Number, Programme Name (or AV) and Sound Indicator are displayed on the upper right of the screen. They are displayed after programme change for 3 seconds. - - C01 Programme Number and Programme Name (5 characters) , , Sound Indicator (Mono, Stereo, Dual) The alternatives of Sound Indicator are Mono, Stereo, Dual which shows the current sound mode. Programme Number, Programme Name and Sound Indica- tor OSD’ s are displayed when a new programme is entered by pressing digit or "- / - -" button, " " button, "P/CH+" or "-P/CH" button. Sleep Timer Indicator (If activated) Screen format Indicator Sleep Timer and Screen format indicators are displayed with Programme Number, Programme Name and Sound Indica- tor by pressing " TV " button. Sleep Timer Indicator shows the time left if enabled. Sound Mute To cut off the sound from the TV press “ ” button. To restore the sound press the “ ” button again or use the “ +” or “- ” buttons, in this case the volume will start from minimum setting. Sound Modes This is a stereo option. The alternatives of Sound Modes are Mono, Stereo, Dual 1 and Dual 2. This indicator is dis- played in the lower middle side of the screen. "I-II" button is used to select Mono, Stereo, Dual 1 or Dual 2. In Mono broadcast or in forced-mono (for stereo broadcast). In Stereo broadcast. If dual broadcast detected. Dual 1 is selected in default and also can be selected after Dual 2 by Remote Control. If Dual 2 selected by Remote Control. Screen Format The picture mode OSD is displayed below the sound indica- tor, by TV Status OSD’s. According to the WSS data, inside of the OSD box AUTO, NORMAL, FULL, 14:9, CINEMA, PANORAMA or SUBTITLE is written. By pressing “ ” button (if Teletext is not active) the picture mode can be switched into AUTO, NORMAL, FULL, 14:9, CINEMA, PANORAMA or SUBTITLE Mode. AUTO FORMAT NORMAL FORMAT FULL FORMAT 14:9 FORMAT CINEMA FORMAT PANO FORMAT SUBTIT FORMAT No-Signal Timer Indicator It is displayed in the middle of the screen when no valid sig- nal detected. It shows the remained time for the switching to the Stand-By mode (it will take 5 minutes). The indicator is displayed in 3 seconds when there is no valid signal. After a Remote Control command (if No-Signal Timer is ac- tive) the timer stops and if no signal detected again the tim- er is initialized to 5 minutes and starts 3 seconds later again to count down. NO SIGNAL 4 : 50 MIN Still Picture Pressing “OK” button makes the picture on the screen fro- zen. Pressing this button again enables moving pictures again. To Display the Time • While watching a TV programme with Teletext transmis- sion press “ ” button. The current time information, cap- tured from Teletext will be displayed at the upper right cor- ner of the screen. • If the programme being watched does not have Teletext transmission, no time information will be displayed. • The time information will disappear after pressing “ ” button again. Flash back ( ) This button is used to return to the previous viewed preset. By pressing the " " button repeatedly it is possible to tog- gle between two presets. Double-digit (- / - -) This OSD is displayed when the "- / - -" button pressed in place of the programme number indicator. After then, in order to enter a programme it must be pressed to two digit consecutively. When it is late to press any digit button this function will be ignored and the display will be erased. In the same way it must not be late to press any dig- it button after entering the first digit. The limit of the delay time is 3 seconds. AV Modes By pressing the “ “ button you can switch your TV to AV modes (except being in Teletext). Pressing this button will switch the TV in one of the optional AV modes: EXT-1, EXT-2, S-VHS, S-VHS EXT2 or FRONT-AV. EXT.1 supports the RGB mode and EXT.2 supports S-VHS EXT2 mode un- less there is an S-VHS socket.. In order to quit the AV mode press the “ TV ”, digit buttons or “P/CH+” / “-P/CH” button.

Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). No on screen display will be available in text mode. No contrast, brightness or colour control, but volume control is available in text mode. To operate Teletext • Select a TV station on which Teletext is being transmitted. • Press (TELETEXT) “ ” button. Usually the list of contents (index) is displayed on the screen. To select a page of Teletext • Press the appropriate digit buttons for the required Teletext page number. The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen. • Press “P/CH+” button to move the Teletext screen forward one page at a time. • Press “-P/CH” button to move the Teletext screen back- ward one page at a time. To Select Index Page • To select the page number of the index (generally page 100), press “ “ button. To Select Teletext with a TV Programme • Press “ “ button. The text is now superimposed over the programme on the screen. • Press “ “ button again to return to the Teletext page. Searching for a page while watching TV • To search for a specific page whilst viewing the TV picture, whilst viewing teletext enter the desired Page number, then press the “ button will restore the TV picture. Once the desired page is found the Header of this page will ap- pear on the screen. Press the “ “ button to view the full page. To Select Double Height Text • Press “ “ button for the top half of the information page to be displayed in double height text. • Press “ “ button again for the bottom half of the informa- tion page to be displayed in double height text. • Press “ “button once more for the full page of normal height text. To Reveal “concealed” Information • Pressing “ “ button once will reveal answers on a quiz or games page. • Pressing “ “ button again will conceal the revealed an- swers. To Stop Automatic Page Change The teletext page you have selected may contain more in- formation than can be displayed on one screen, in such cas- es the page will update periodically. • Press “ “ button to stop the automatic page change. • Press “ “ button again to allow the next page to be dis- played. Split Screen • To watch a TV programme and teletext at the same time on the screen this function is used. • While watching a TV programme with teletext transmission press “ ” button. • Teletext is displayed on the screen. Press “ ” button again. The screen is divided into two parts. TV program is displayed on the left side of the screen. Teletext is dis- played on the right side of the screen. • To exit split screen press “ ” button one more time. To Select a Subcode Page Subcode pages are subsections of long teletext pages that can only be displayed on the screen one section at a time. • Select the required teletext page. • Press “ ” button. number / - - will be displayed on the left top corner of the screen. • Select the required subcode page number by pressing 2 digit buttons. (e.g. 0 5) • You can go to other subcode pages by pressing “ ” or “ ” buttons or, • After number / - - displayed, you can simply press “ ” button again to update the subcode pages automatically. Fastext Teletext mode will be selected according to transmission au- tomatically. Your TV supports the 10 page Teletext system. When the page number of any of the 10 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. • Press “ ” button to move the Teletext screen forward one page at a time.

• Press “ ” button to move the Teletext screen backward one page at a time. For Fastext The subject-heading for the information may have a particu- lar colour or can be in a form located in a coloured box. • Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly. To exit Teletext • Press “ TV ” button. The screen will switch to TV mode. Connecting external equipment Via the Euro connector Your TV set has two euro connector sockets. If you wish to connect external equipment (e.g. video recorder, decoder, etc.) which have Euro connectors, to your TV, use the EXT.1 (EXT-1) or EXT.2 (EXT-2) terminals. If an external device is connected via Euro connector sock- ets the TV will be switched to AV mode automatically. RGB mode If a piece of equipment outputs RGB signals use the EXT-1 Euro connector as this is RGB ready. S-VHS EXT2 Mode If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better pic- ture quality by selecting S-VHS EXT2 mode and connecting your equipment to the EXT.2 (S-VHS EXT2) terminal of TV. See your equipment's booklet to check if your equipment has such feature. Via the ANT (aerial) socket If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment. • To store the test signal that comes from the equipment, see “Installation Menu” on page 13 and store it to the programme number 0. You can watch images from that equipment to select the programme number which you stored the test signal. Via the RCA jacks If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the FRONT-AV terminal with the video and audio cables. • If the equipment has the mono audio jack, connect it to the AUDIO-L jack. TV and Video Recoder (VCR) • Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable. • Connect the Video Recorder to the EXT.1 or EXT.2 termi- nal with the SCART cable, or connect it to the FRONT-AV terminal with the audio and video cables. • VCR is detected automatically. NTSC Playback Connect a NTSC video recorder to a terminal. Then press “ EXT ” button to select the corresponding AV mode. NTSC 3.58/4.43 system is detected automatically in AV mode. Copy Facility You can output the video and audio signals which inputs from TV, EXT.1 (EXT-1), FRONT-AV or SCREEN terminal to the video recorder connected to the EXT.2 (EXT-2) terminal. • To select the output source, see “EXT2 Output” on page 13. To connect to S-VHS input Connect your camera or camcorder at the front or back side of your TV. • Connect your equipment to the TV via S-VHS input and audio inputs of FRONT-AV inputs by using S-VHS cables. Connecting Headphones Use the stereo headphone socket on the lower front side of your TV, to connect headphones.

Connecting external equipment Before connecting anything • Switch off all equipment. • Read the manuals provided with the equipments. To select an AV mode Pressing “ EXT ” button on the remote control selects one of AV modes (EXT-1, EXT-2, S-VHS, S-VHS EXT2 or FRONT-AV) • To return to the TV mode, repeatedly press “ EXT ” button. EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART) • Video input, Audio L/R inputs and RGB inputs are available. • TV broadcast outputs (Video and Audio L/R) are available. EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART) • Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available. • Video and Audio L/R outputs are available. (see “EXT2 Output” on page 13.) FRONT-AV terminal: RCA connectors x 3 • Video input and Audio L/R inputs are available. S-VHS terminal: • S-VIDEO (Y/C) input. Do not use S-VHS and FRONT-AV inputs at the same time even if those options available in the set. EXT.2 EXT.1 Antenna EXT-2 EXT-1 DECODER FOR SATELLITE RECEIVER VIDEO HEADPHONE AUDIO CAMERA Video Input Terminal Audio Input Terminal FRONT-AV Headphone CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO S-VHS

Typical Connections Note: For further details, please refer to operation manual of your VCR. Aerial Connections - TV and VCR - Aerial (Not supplied) Aerial Lead (Not supplied) ANT. EXT.2 EXT.1 Aerial Lead (Not supplied) Scart Lead (Not supplied) BACK OF TV Aerial IN BACK OF VCR Audio/Video RF OUT AV/TERMINAL (EXT-1) Aerial IN

Typical Connections (Continued) Note: For further details, please refer to operation manuals of your DVD Player, DECODER and VCR. Connections - TV, DVD Player, DECODER and VCR (Videorecorder) - AV/TERMINAL (EXT-1) BACK OF TV DVD PLAYER DECODER Scart Lead (Not supplied) Scart Lead (Not supplied) AV/TERMINAL (EXT-2) Scart Lead (Not supplied) Aerial Lead (Not supplied) Aerial (Not supplied) Aerial Lead (Not supplied) Aerial IN Audio/Video BACK OF VCR RF OUT Aerial IN ANT. EXT.2 EXT.1

Typical Connections (Continued) Note: For further details, please refer to operation manuals of your DVD Player and Digital Set Top Box. Connections - TV, DVD Player and Digital Set Top Box - BACK OF TV ANT. EXT.2 EXT.1 DVD PLAYER Scart Lead (Not supplied) AV/TERMINAL (EXT-2) Aerial IN Aerial (Not supplied) Satellite dish (Not supplied) Dish Lead (Not supplied) Aerial Lead (Not supplied) Scart Lead (Not supplied) Aerial Lead (Not supplied) DIGITAL SET TOP BOX RF OUT AERIAL IN TV SCART DISH IN ANT. E X T.2 E X T.1

Typical Connections (Continued) Note: For further details, please refer to operation manuals of your DVD Player, VCR and Digital Set Top Box. Connections - TV, DVD Player, VCR and Digital Set Top Box - BACK OF TV ANT. EXT.2 EXT.1 DVD PLAYER Scart Lead (Not supplied) Aerial IN AV/TERMINAL (EXT-2) Aerial (Not supplied) Satellite dish (Not supplied) Dish Lead (Not supplied) Aerial Lead (Not supplied) Scart Lead (Not supplied) DIGITAL SET TOP BOX BACK OF VCR Aerial Lead (Not supplied) Scart Lead (Not supplied) RF OUT Aerial IN Audio/Video Aerial Lead (Not supplied) RF OUT AERIAL IN TV SCART DISH IN ANT. E X T.2 EXT.1

Typical Connections (Continued) BACK OF TV Connection-TV power cable to a 220 ~ 240 V system - Mains Socket Outlet AC 220~240 V, 50 Hz ANT. EXT.2 EXT.1 Note: For further details, please refer to operation manual of your Video Camera. AN T. E XT. 2 E XT. 1 BACK OF TV CAMCORDER IN OUT IN OUT Audio/Video lead (Not supplied) Connections - TV and Video camera - Front connections -TV and Video camera- Note: For further details, please refer to operation manual of your Video Camera.

21-pin Euro-SCART and 21-pin Audio/Video REAR TV RF Input 1. Aerial terminal 21-pin In/Out 2. 21-pin Audio/Video (RGB) (EXT.1) With PAL/SECAM/NTSC 3. 21-pin Audio/Video (EXT.2) With PAL/SECAM/NTSC/S-Video Input 21-pin Euro-SCART with RGB input (EXT.1) 1. Audio right output 8. Audio-video control 15. Red input 2. Audio right input 9. Earth for green 16. Red/Green/Blue control 3. Audio left output 10. Not used 17. Earth for video 4. Common earth for audio 11. Green input 18. Earth for Red/Green/Blue control 5. Earth for blue 12. Not used 19. Video output 6. Audio left input 13. Earth for red 20. Video input (PAL/SECAM/NTSC) 7. Blue input 14. Not used 21. Plug shield 21-pin Audio/Video with S-Video Input (EXT.2) 1. Audio right output 8. Audio-video control 15. Chroma S-Video input 2. Audio right input 9. Earth 16. Not used 3. Audio left output 10. Not used 17. Earth for video 4. Common earth for audio 11. Not used 18. Earth 5. Earth 12. Not used 19. Video output 6. Audio left input 13. Earth 20. Video input (PAL/SECAM/NTSC/S-Video) 7. Not used 14. Not used 21. Plug shield EXT.2 EXT.1 1 2 3

Troubleshooting The following conditions do not always denote trouble. Therefore, performs the checks described below before calling for service. If the problem cannot be corrected by the use of this guide, pull the power plug out from the electrical outlet and call for service. TV not plugged in Outlet power OFF Main power button of TV not ON Turn OFF using the Main Power button, then turn ON again after a minute Remote control does not work Check batteries in the Remote Control Try a new channel to check for possible station trouble If outside aerial is used, check for broken wires Adjust COLOUR control Try fine tuning to correct Aerial not connected to terminal at the back of the TV set No colour / Picture weak Try a new channel to check for possible station trouble Aerial not connected to terminal at the back of the TV set If outside aerial is used, check for broken wires Check for local interference Poor reception on some channels Try a new channel to check for possible station trouble Aerial not connected to terminal at the back of the TV set If outside aerial is used, check for broken wires Check for local interference Adjust COLOUR control Try fine tuning to correct Sound OK, poor picture Check if the Brightness or Contrast setting in the picture setting mode might be all the way to the minus side Try a new channel to check for possible station trouble Check for local interference Increase the volume / Check Audio levels Picture OK, poor sound Try a new channel to check for possible station trouble TV not plugged in Outlet power OFF Main power button of TV not ON Aerial not connected to terminal at the back of the TV set If outside aerial is used, check for broken wires Turn OFF using the Main Power button, then turn ON again after a minute Check if the Brightness or Contrast setting in the picture setting mode might be all the way to the minus side Increase the volume / Check Audio levels No picture or sound PROBLEMS POSSIBLE CAUSES / REMEDIES CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO CH S-VIDEO VIDEO L/S/G/I R/D/D/D AUDIO

Specifications TV BROADCASTING PAL SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BANDI/III) UHF (BAND U) HYPERBAND CABLE-TV (BG: S01-S41 / S75-S79 L: S01-S41 / S75-S77 I: S01-S41 DK: S01-S19, S22-S41) NUMBER OF PRESET CHANNELS 100 CHANNEL INDICATOR ON SCREEN DISPLAY RF AERIAL INPUT 75 Ohm Unbalanced OPERATING VOLTAGE 220-240V AC, 50 Hz. POWER CONSUMPTION (W) (28LF-94EC) (32LF-94EC) 120 Watt Power Consumption at Stand-by < 3 W AUDIO OUTPUT (RMS) 2x10 W AUDIO SYSTEMS (Receiving) Mono FM, German Stereo (IGR) and Digital Stereo NICAM PICTURE TUBE 28” 16:9 32” 16:9 Safety CE - MARK EMC CE - MARK DIMENSIONS (DxLxH) (mm) (28LF-94EC) D L H Weight (kg) 507 827 495 39 DIMENSIONS DIMENSIONS (DxLxH) (mm) (32LF-94EC) D L H Weight (kg) 562 930 556 54 DIMENSIONS Cleaning The Screen Your TV is fitted with a „True Flat" picture tube. The sur- face of the screen is covered with a foil. Under no cir- cumstances may this be damaged. To clean Clean the laminated screen with a soft cotton cloth. Only non-alkaline, thinned soapsuds on a basis of water or alkohol be used to moisten the cloth. Rub the surface gently with the cloth until the surface is completely dry. Under no circumstances... may the screen be wiped with conven tional glass clean- ing fluid. may the screen be brought into contact with abrasive materials. may soiling be renoved by polishing or scouring. To clean off sticky substances, the cloth can be moistened with acetone. Under no circumstances clean with this acetone cloth the TV-Cabinet.