Roadmaster Wireless Back-up Camera System VRBCS335WCA Installation And Operation
Text of the manual
RoadmasterUSA.com – Car Audio and Entertainment
VRBCS335WCA
Wireless Rear View Camera and Monitor with Wired Option
Installation & Operation Section:
Some of our cameras have the ability to be hardwired to the monitor. This will eliminate
interference by completely shutting down the wireless reception.
The cable that is needed for this is of a proprietary
RoadmasterUSA.com – Car Audio and Entertainment
Monitor Connections:
A. There are three ways to supply power to the Monitor.
1. The 12 VDC Cigarette Lighter Plug cable.
2. The 12 VDC Hard Wire cable to the fuse box.
3. When the Wired Option is used, Monitor power is supplied directly from the camera.
B. USB Charging Port Only for use with 12 VDC Cigarette
RoadmasterUSA.com – Car Audio and Entertainment
5. Some vehicles may have a hole available to pass the wire through (Fig. 3) such as where the
license plate lamp is mounted, or you may need to drill a 1⁄2 hole to pass the wire through. If you
are able to use an existing opening, skip the next two steps.
6. If you drill a 1⁄2 hole for the wire, choose
