GE GSD3400 series Owner's Manual

Low inlet water temperature What ToDo Make sure inlet water temperature is correct (see page 12). Select HI TEMPRINSE m-z(l/or HEATEDDRY. Che_k tlle rinse agent dispenser. (;all tor service, Replace tilse or reset circuit breaker. Remove any other appliances fl'om the cir_alit. Tx) resetting the START/RESETpad. Control panel responded to inputs but dishwasher never filled with water Rinse agent dispenser is empty Door latch may not be properly seated Dishwasherwon'trun Fuse is blown, orthe circuit breaker tripped Steam This is normal Saoitizedlightdoes not illu ...

described in this Owner's Manual PROPER INSTALLATION ANDMAINTENANCE This dishwasher must be properly installed and located in accordance with the Installation Instructions before #is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by calling us toll-free at the GEAnswer Cente_ 800.626.2000. s_,Connect to a grounded metal, permarmr_t wiring system; or run an equipment- grourldir_o conductor with the cirolit conductors and connect to the equipment- groundino terminal or lead of the appl ...

or an authorized Customer Care®technician. For service, call 800-GE-CARES. One Year From the date of the original purchase SecondYear From thedate of the originalpurchase Ten Years From the date of the original purchase GEWill Replace: Anypart ot the dishwasher whkh tilils due 1o a defect in materials or workmanship, l)uring this full one-year warran_ GE will also provide, free of charge, all labor and in-home service to replace the (tet_ctive part. Any part of the Water Distribution Systemwhich tails due to a ...