RocketFish RF-MAB2 Quick Setup Manual

Hands-free Audio, then click Set Default. 10 On the Recording tab, select Headset Microphone 2-Bluetooth Hands-free Audio, then click Set Default. 11 Click OK. Computer running Windows XP: Note: Before you pair the headset with the computer, make sure that the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer. 2 Double-click the Bluetooth icon in the system tray, near the clock. My Bluetooth Places opens. 3 Click Add a New Bluetooth Device. The Add Bluetooth Device Wizard opens. 4 Click Next. 5 With the headset turned off, press and hold Talk until the LED blinks blue and red rapidly, indicating pairing mode is activated (This typically takes three to six seconds). 6 Double-click the RF-MAB2 icon on the computer or highlight the icon and click Next. Note: If you are unable to locate the RF-MAB2 icon, click the Search Again button. 7 Enter 0000 (four zeros) in the Bluetooth security code field, then click Next. 8 Select one of the Bluetooth hands-free types shown on the Add a Bluetooth Device Wizard screen, then click Next. 9 Select the services shown on the wizard screen to use with your Bluetooth headset, then click Finish. 10 To connect the device, double-click the MAB2 Hands-Free Unit icon or the RF-MAB2 Stereo Audio icon. Note: To use the headset, it must be selected as the default recording and playback device on the computer. If the headset is not the default playback device, complete Steps 11 through 14. 11 Click Start, then click Control Panel. 12 Click Sounds, Speech, and Audio Devices. 13 Click the Sounds and Audio Devices icon. 14 On the Audio tab, select Bluetooth Hands-free Audio or Bluetooth Stereo Audio in the Sound recording list, and select Bluetooth Hands-free Audio in the Sound playback list, if it is an option. QUICK SETUP GUIDE Bluetooth Stereo Headset RF-MAB2 Congratulations on your purchase of the Rocketfish Mobile Bluetooth Stereo Headset. Listen to music wirelessly with Bluetooth audio devices and answer phone calls hands-free. You can use the headset to answer and make calls and to play music stored on your cell phone. Features Package contents • Bluetooth Stereo Headset • AC wall adapter • USB charging cable • Quick Setup Guide • Replacement earphone pads Turning the headset on and off • To turn the headset on or off, press and hold the Power button for three seconds. The LED flashes blue. Pairing the headset Cell phone or MP3 player 1 With the headset turned off, press and hold Talk until the LED blinks blue and red rapidly, indicating pairing mode is activated (This typically takes three to six seconds). 2 On the phone or MP3 player when paring mode is activated, select RF-MAB2 from the list of discovered devices, then enter the password 0000 (four zeros) to pair your headset. For more information on pairing Bluetooth devices to your cell phone or MP3 player, see the device’s documentation. Note: After the headset has been successfully paired with the cell phone or MP3 player, the headset connects automatically to the phone or MP3 player the next time the headset is turned on near the phone or player. Computer running Windows 7: Note: Before you pair the headset with the computer, make sure that the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer. 2 Double-click the Bluetooth icon in the system tray, near the clock. 3 Click Add a device. 4 With the headset turned off, press and hold Talk until the LED blinks blue and red rapidly, indicating pairing mode is activated (This typically takes three to six seconds). 5 Double-click the RF-MAB2 icon on the computer or highlight the icon and click Next. 6 Click Close after the headset has been paired. Note: To use the headset, it must be selected as the default recording and playback device on the computer. If the headset is not the default playback device, complete Steps 7 through 11. 7 Click Start, then click Control Panel. 8 Click Hardware and Sound, then under Sound, click Manage audio devices. 9 On the Recording tab, select Headset Microphone Bluetooth Hands-free Audio, then click Set Default. 10 On the Playback tab, select Speakers Bluetooth Hands-free Audio, then click Set Default. 11 Click OK. Computer running Windows Vista: Note: Before you pair the headset with the computer, make sure that the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer. 2 Double-click the Bluetooth icon in the system tray, near the clock. 3 Click Add Wireless Device. 4 With the headset turned off, press and hold Talk until the LED blinks blue and red rapidly, indicating pairing mode is activated (This typically takes three to six seconds). 5 Double-click the RF-MAB2 icon on the computer or highlight the icon and click Next. 6 Click Close after the headset has been paired. Note: The headset should be automatically selected as the default playback device. If the headset is not the default playback device, complete Steps 7 through 9. 7 Click Start, then click Control Panel. 8 Click Hardware and Sound, then under Sound, click Manage audio device. FIND YOUR USER GUIDE ONLINE! We are going green so a copy of your User Guide is not provided in the box but is available online. Go to www.rocketfishproducts.com, click Support & Service, enter your model number in the box under Manual, Firmware, Drivers & Product Information, then click Search. Before using your new product, please read these instructions to prevent any damage. Play/Pause Power/Talk Logo with LED Receiver Receiver Volume USB port Microphone

To enable 3D sound while in music playback mode, press twice to select the next 3D sound effect from the available effects. Normal mode and four types of 3D sound effects are programmed in the order below. • Normal No 3D sound effect. (Two beeps indicate Normal mode.) • Provides a comfortable and consistent listening environment by reducing distracting sounds. • Delivers a natural and soft 3D sound field effect simulating that of a live performance. • Provides a panoramic 3D audio image of widely spread main vocal and center-placed instruments. • Low Delivers a wide stereo sound image, but enhances low-frequency sound to provide rich and deep bass tones. Resetting the headset • Press Play, Talk, and + simultaneously. Headset Status Power on Turning off Low battery Recharging Recharging complete Pairing mode Connection complete Receiving a call Talking on the phone LED Status Blue LED flashes Red LED dims and disappears Red LED blinks continuously Red LED stays on Blue LED stays on Blue and red LEDs flash rapidly Blue LED blinks every two seconds Blue LED flashes rapidly Blue LED brightens and dims repeatedly LED indicator messages Specifications Bluetooth version: 2.1 Supported profiles: A2DP, AVRCP, HFP, HSP Frequency spectrum: 2.4~2.4835 GHz Working distance: Maximum 33 feet (10 m) Operating temperature: 14~140° F (-10 ~ 60° C) Operating time: Talk: 14 hours; music: 12 hours Standby time: 340 hours Size: 6 × 5.4 × 2.4 inches (153 × 138 × 60 mm) Weight: 1.9 oz (54 g) Average charging time: 3 hours V6 ENGLISH 13-0118 Tell us what you think! Please go to www.bestbuy.com and write your review for this product. To: Play/Pause Select a song Rewind or fast forward a song Answer a call while playing music Change the volume Do this: Press to launch the phone’s MP3 player and begin playing music. Press to pause and resume playback. Press and hold stop playback. Press and release  or . While music is playing, press and hold  or . (Some phones may not support this feature.) Press Talk, or press to reject the call. Press Talk again to end the call. Music resumes playing after a call is rejected or ended. Press + or – . To: Voice dial Redial Answer a call End a call Refuse a call Change the volume Transfer a call between connected devices Do this: Press Talk once. (Some phones might not support this feature.) Press Talk twice. Press Talk once. Press Talk once. While your phone is ringing, press Play/Pause. Press + or – . Press Talk twice. Mac computer Note: Before you pair the headset with the computer, make sure that the computer is equipped with a Bluetooth radio. Refer to the computer’s documentation or contact the computer manufacturer for more information. If you do not have a Bluetooth radio, install a Bluetooth USB adapter (dongle). 1 Turn on Bluetooth on the computer. For instructions, see the computer’s documentation or contact the computer manufacturer. 2 Click the Bluetooth status menu. 3 Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens. 4 Click Continue. 5 Select Headset as the device type, then click Continue. 6 With the headset turned off, press and hold Talk until the LED blinks blue and red rapidly, indicating pairing mode is activated (This typically takes three to six seconds). 7 Select RF-MAB2, then click Continue. The computer gathers information. 8 Click Continue. 9 Enter 0000 (four zeros) into the Passkey field, then click Continue. 10 Click Quit when finished. Note: To use the headset, it must be selected as the default input and output device on the computer. If the headset is not the default input and output device, complete Steps 11 and 12. 11 Click System Preferences, then click Sound. 12 Under Input, select RF-MAB2, then under Output, select RF-MAB2. Making phone calls ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2013 BBY Solutions, Inc. All Rights Reserved.