Edirol FA-101 Owner's Manual

Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. EUROPE EDIROL (Europe) Ltd. Studio 3.4 114 Power Road London W4 5PY U. K. TEL: +44 (0)20 8747 5949 FAX:+44 (0)20 8747 5948 http://www.edirol.com/europe Deutschland TEL: 0700 33 47 65 20 Italia TEL: 02 93778329 CANADA Roland Canada Ltd. (Head Office) 5480 Parkwood Way Richmond B. C., V6V 2M4 CANADA TEL: (604) 270 6626 Roland Canada Ltd. (Toronto Offi ...

1. Power up the FA-101, and then start up Cubase. 2. From the Devices menu, choose Device Setup to open the Device Setup dialog box. 3. In the Devices list at the left side of the dialog box, choose VST Multitrack. 4. Select the Setup tab in the right side of the dialog box. 5. From the drop-down list for ASIO Driver, choose EDIROL FA-101. 6. Click [OK] to close the Device Setup dialog box. fig.cubase-1.eps If you experience clicks or pops in the sound, click [Expert] to open the VST Engine Expert Settings ...

14 A dialog box entitled “Completing the Found New Hardware Wizard” appears. Click [Finish]. Once again, the “Found New Hardware” message appears near the taskbar. Please wait. 15 A dialog box entitled Welcome to the Found New Hardware Wizard appears. Make sure that the box indicates “EDIROL FA-101 Sub 2,” choose “Install the software automatically (Recommended),” and click [Next]. 16 A dialog box entitled “Completing the Found New Hardware Wizard” appears. Click [Finish]. The “Found New Hardware” message appears near the taskbar. 17 I ...

If you will be using the Windows Media Player application with the FA-101, specify the input/output devices as follows. The method in which you make device settings will depend on the software you are using. For details, refer to the owner’s manual for your software. 1 Open the Sound, Speech, and Audio Devices Properties dialog box. 1. From the Windows start menu, choose Control Panel. 2. In “Pick a category,” click Sound, Speech, and Audio Devices. 3. In “or Pick a Control Panel icon,” click the Sounds and Audio Devices icon. 2 Click the Audio tab. ...

Use Maximum Buffer Setting. If this item is checked, the slider and the settings of the WDM and ASIO items will be ignored, and an even larger buffer size will be used. If you still experience clicks or pops even after doing this, the problem may lie elsewhere. Please refer to the Troubleshooting section. * Depending on your software, there may also be a buffer size and latency adjustment in the audio settings of your software. For details, refer to the owner’s manual for ...

8 From the Windows start menu, choose “Run...” The “Run” dialog box will appear. 9 Input the name into the dialog box as shown, and click [OK]. fig.win-run (Drive name): \Driver\XP_ENG\setup.exe * The drive name is “D:” in the example shown here, but this may be different on your system. Specify the drive name for your CD-ROM drive. 10 The EDIROL FA-101 Driver Setup dialog box appears. Click [Install]. 11 A dialog box entitled “Setup is now ready to install the drivers” appears. Use a FireWire (IEEE 1394) cable to connect the FA-101 to your ...