Sitecom WL-130 Manual 

1. Introduction.................................................................................... 1 Package Contents.................................................................................................................................................... 2 Features................................................................ ...

access point to build up a wireless LAN. Any wireless LAN station can join the wireless network by using the “Infrastructure Mode”. Another option is the Universal Repeater mode with which you can extend the range of your existing ...

y One Access Point with antenna y One Power Adapter y One User’s Manual Features y Complies with the IEEE 802.11b/g (DSSS) 2.4GHz specification. y High data rate 54Mbps network speed. y Seamlessly integrate wireless and wired Ethernet LAN networks. y Auto rate fallback in case o ...

Front Panel On the Access Point’s front panel there are LED lights that inform you of the Access Point’s current status. Below is an explanation of each LED. LED Color Status Description Lit Power is supplied. Power Green Off No Power. Flash Antenna is transmitting or receiving data. WLAN Green Off Antenna is not t ...

connection port. y Antenna Connector: This round connection is standard Reverse SMA connector where any antenna with Reverse SMA connector can connect to the Access Point. y DC Adapter Port Insert the power jack of the power adapter int ...

5 3. Hardware installation Use the WL-130 as an Access Point 1. Locate an optimum location for the WL-130. The best location for your Access Point is usually at the center of your wireless network, with line of sight to all of your mobile stations. 2. Connect the WL-130 to your router, hub or switch. Connect on ...

6 4. Wireless LAN Access Point Configuration This Access Point provides a web-based configuration tool allowing you to configure from wired or wireless stations. Follow the instructions below to get started configuration. From Wired Station 1. Make sure your wired station is in the same subnet as the Access Poi ...

7 1b) Windows XP 1: Click the Start button and select Settings, then click Network Connections. The Network Connections window will appear. 2: Double-click Local Area Connection icon. The Local Area Connection window will appear. 3: Check your list of Network Components. You should see Internet Protocol [TCP ...

8 2. Enter 192.168.0.254 in the address bar of your web browser to access the Universal Repeaters configuration page. 3. A screen will pop up and request you to enter a user name and password. Enter the following: User Name: admin Password: admin Enter the default user name and password, then press the OK button ...