Gefen COMPAUD-141 Operation & User’s Manual

8:00 AM to 5:00 PM Monday thru Friday PST Write To: Gefen Inc. C/O Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com [email protected] Notice Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Component w/ Audio Extender is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved ASKING FOR ASSISTANCE

INTRODUCTION / HOW IT WORKS / OPERATION NOTES FEATURES PANEL DESCRIPTION PANEL DESCRIPTION INSTALLATION INSTRUCTIONS / HOW TO ADJUST THE PICTURE CAT5 WIRING DIAGRAM SPECIFICATIONS WARRANTY 1 2 3 4 5 6 7 8

Extend your audio and video signal using the Gefen Component Audio Extender. Place your source anywhere and extend the signal up to 1000 feet (300 meters) away. The Component Audio Extender will extend Analog Component as well as Analog Audio and Digital Audio via SPDIF or TOSlink. Introduction 1 READ THESE NOTES BEFORE INSTALLING OR OPERATING THE Component Extender SYSTEM • Use industry standard Category-5e (CAT-5e) cable to operate the Component with Audio Extender system. CAT-5e cable is preferred. • Please connect all the cables between the source and the Component with Audio Extender before powering up the Component with Audio Extender unit. • The Component with Audio Extender units are housed in a metal box for better RF shielding. OPERATION Notes HOW IT WORKS The Component Audio Extender sender unit connects to any component video and audio source using the supplied Component and RCA cables. The receiver unit connects to your HDTV component video display and audio input up to 1000 feet (300 meters) away. One CAT-5e cable is used to connect the sender to receiver for perfect video extension up to 1080p. The sender and receiver will be powered individually by 5V power supplies.

• Supports analog L+R audio • Plug and play installation • Equalizations for different CAT-5 skews • One CAT-5 cable for extension Includes: (1) Component Audio Extender Sender (1) Component Audio Extender Receiver (1) 6ft. Component Cable (1) RCA Audio Cable (2) 5V Power Supply FEATURES 2

Panel descriptions 5V Power Supply Input Component Input Analog Audio Input SPDIF Input Optical / Toslink Input Power Light Indicator 3 Sender 5V Power Supply Input Component Output Analog Audio Output SPDIF Output Optical / Toslink Output Power Light Indicator Receiver

CAT-5e Cable Input CAT-5e Cable Input Brightness Trim Pot Focus Trim Pot Panel descriptions 4 Sender Receiver

Component Extender Sender Unit. Connect the audio output of your source / receiver to the input on the Component Extender Sender Unit. Connect the Component input of your display to the Component output on the Component Extender Receiver Unit. Connect the audio input of your display to the Component output on the Component Extender Receiver Unit. Connect a CAT-5 cable between the Component Extender sender and receiver’s CAT-5 input. Power on the display first and then the source. INSTALLATION INSTRUCTIONS 1. 2. 3. 4. 5. 6. 5 Note: Any of the 3 RCA lines can be used for any color. Both ends will need to be matched for the signal to be passed through correctly. BRIGHTNESS AND FOCUS TRIM PODS If your picture is too dark or if you see a “ghosting” effect on your display, then the trim pods will help correct this problem. If your picture is too dark then the brightness trim pod will help brighten up your display. If your picture has a “ghosting” effect and/or noise, then the focus trim pod will help sharpen up your picture. Turn trim pods to the left and right to eliminate any noise on your picture.

6

Actual Bandwidth...................................................................................................120MHz Input Video Signal...........................................................................................1.2 Volts p-p Input Sync Signal.....................................................................................5 Volts p-p (TTL) Horizontal Frequency Range.............................................................................15-70 KHz Vertical Frequency Range..................................................................................30-170 Hz Video In/Out...........................................................................................3 RCA component Audio In/Out...................................................................2 RCA Audio, 1 SPDIF, 1 TOSlink Link Connector...........................................................................................RJ-45 Shielded Power Supply...........................................................................................................5V DC Power Consumption.....................................................................................5 watts (max.) Dimensions..........................................................................................3”W x 1”H x 3.75”D Shipping Weight.........................................................................................................3 lbs. SPECIFICATIONS 7