Panasonic CS-XE12EKE Operating Instructions Manual

■ About Filter cleaning Filter cleaning function helps to: • Clean the filters automatically on a regular basis. • Avoid airflow blockage caused by dusty filter. • Prevent growth of mold inside the unit. • Improve heating/cooling effect that saves energy consumption. Auto Filter Cleaning Filter Cleaning Device • By default, filter cleaning will run automatically once the unit is turned off if the air conditioner: - Operates continuously for at least 2 hours and above, and - Accumulative operation time is at least 2 hours and above. • The filter surfac ...

TIMER • The timer allows you to turn the air conditioner on or off automatically. • The unit may start in preliminary operation before the actual set time when ON timer has been set. • The set timer repeats daily once set. • If there is a power failure, you can restore the previous setting (once power is resumed) by pressing the button. • If the timer is cancelled, press to restore the previous setting. ● The timer is valid only when the clock is set correctly. ● You can set your preferred time for ON and OFF timers. The unit will turn on or off a ...

• Checking of remote control batteries. • No obstruction at inlet and outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between inlet and outlet vents: Cooling: ≥ 8°C Heating: ≥ 14°C INSPECCIÓN PERIÓDICA TRAS NO UTILIZAR LA UNIDAD DURANTE UN TIEMPO PROLONGADO DE TIEMPO: • Verifi que las pilas del mando a distancia. • Compruebe que las tomas de entrada y salida de aire no están obstruidas. • Tras 15 minutos de funcionamiento, es normal que se produzca la siguiente diferen ...

• To aerate the room. • As a default setting, ventilation will be turned on automatically once the air conditioner operation starts. • Operates simultaneously with Auto/ Cooling/Heating/Drying operation. • Press repeatedly to select your desired ventilation setting. Auto/Cooling/Heating/Drying operation remains as normal regardless of ventilation setting. • When is pressed, all of the air conditioner operations are turned off. • Ventilation operates independently. • Ventilation can be turned on when t ...

• Checking of remote control batteries. • No obstruction at inlet and outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between inlet and outlet vents: Cooling: ≥ 8°C Heating: ≥ 14°C INSPECCIÓN PERIÓDICA TRAS NO UTILIZAR LA UNIDAD DURANTE UN TIEMPO PROLONGADO DE TIEMPO: • Verifi que las pilas del mando a distancia. • Compruebe que las tomas de entrada y salida de aire no están obstruidas. • Tras 15 minutos de funcionamiento, es normal que se produzca la siguiente diferen ...

● To cancel fi lter cleaning timer, press , then press . Press to set cleaning timer. 1 Press to turn on cleaning timer. ON is shown on the display. 2 Press to confi rm the setting. is shown on the display. Press to select your desired time. 3 4 ■ About • Filter cleaning timer can be set to run at a specified time daily, given that the air conditioner accumulative operation time is at least 30 minutes and above. • Filter cleaning timer overrides air-conditioner’s timer in any given setting. • Once filter cleaning timer starts, air conditioner operation wi ...