Generac Power Systems 00919-0 Owner's Manual

ITEM PART NO. QTY. DESCRIPTION 25 R e c r e a t i o n a l V e h i c l e G e n e r a t o r 1 90953 1 SCROLL, FLYWHEEL 2 45756 8 SCREW, TAPTITE M6-1.0 x 10 LG 3 90388 1 SCREW, TAPTITE M6-1.0 x 12 LG 4 91222-A 1 FLYWHEEL (20 DEG.) 5 67198-N 1 WASHER, BELLVILLE M20 6 67890 1 NUT, M20 x 1.5 7 A4456 1 3/8” SPECIAL LOCK WASHER 8 56893 23 SCREW, CRIMPTITE #10-24 x .5 LG 9 98769 1 COVER,TOP FLYWHEEL NP50 11 91646 1 DEFLCT., EXHAUST PORT 12 92572 1 ASSY., IGNITION COIL 13 92079 2 SCREW, TAPTITE M6-1.0 x 25MM 14 22717-A 1 GROMMET, RUBBER 15 73132 1 BOOT, SPARK PLUG 16 9 ...

vicing this equipment. Become familiar with the Owner’s Manual and with the generator. The generator can operate safely, efficiently and reliably only if it is properly installed, operated and maintained. Many accidents are caused by failing to follow simple and fundamental rules or precautions. Generac cannot possibly anticipate every possible circumstance that might involve a hazard. The warnings in this Manual and on tags and decals affixed to the unit, are therefore, not all-inclusive. If you use a procedure, work ...

Generac NP-50LPG Recreational Vehicle Generator GENERATOR APPLICABILITY These generators have been designed and manufactured for supplying electrical power for recreational vehicles. You should not modify the generator or use it for any application other than for what it was designed. If there are any questions pertain- ing to its application, write or call the factory. Do not use the unit until you have been advised by a competent authority. DANGER: FOR FIRE SAFETY, THE GENERATOR MUST HAVE BEEN PROPERLY INSTALLED IN COMPLIANCE WITH ...

21 R e c r e a t i o n a l V e h i c l e G e n e r a t o r 1 BASE, MOUNTING 92603 1 2 GROUND CABLE 90141 1 3 MOUNT, (RUBBER) 46911 4 4 CAPSCREW, .-3/8"-16 x 1/2" 25017 8 5 LOCKWASHER-M10 46526 10 6 LOCKWASHER-M8 22129 4 7 SKID, RUBBER MOUNT 72391 2 8 SAFETY BOLT 5/16"-18 x 3 1/2" 77603 2 9 NUT, HEX-5/16-18 22259 2 10 NUT, FLANGED LOCK-M8-1.25 52858 6 11 CAPSCR. -M8-1.25 x 60MM 51730 2 12 SPRING, BELT TENSION 29459 2 13 WASHER, SPRING CNTR. 75215 2 14 SLIDE (NYLON) 73146 4 15 SUPPORT, NYLON SLIDE 75209 2 16 MANIFOLD, EXHAUST 91032 ...

Generac NP-50LPG Recreational Vehicle Generator GENERATOR CONTROL PANEL Mounted on the generator control panel (Figure 2) are the fol- lowing features: Figure 2 — Generator Control Panel FUEL PRIMER Before starting a cold engine (if it has not been started in more than two weeks), you must press this switch to bring fuel from the tank to the fuel regulator. This rocker type switch springs back into its original position when you release it. START/STOP SWITCH To crank and start the engine, hold this switch at its START position. Re ...

The voltage regulator also incorporates a “voltage surge pro- tection circuit.” This circuit prevents troublesome surges in the generator AC output voltage. Voltage surge is a common cause of damage to electronic equipment. 25-HOUR BREAK IN PERIOD The first 25 hours of operation is the break-in period for the generator. Properly breaking in the generator is essential to minimize fuel consumption and provide maximum engine per- formance. During this 25-hour break in period, follow this procedure: • Run the unit at varying elec ...

ITEM PART NO. QTY. DESCRIPTION 25 R e c r e a t i o n a l V e h i c l e G e n e r a t o r 1 90953 1 SCROLL, FLYWHEEL 2 45756 8 SCREW, TAPTITE M6-1.0 x 10 LG 3 90388 1 SCREW, TAPTITE M6-1.0 x 12 LG 4 91222-A 1 FLYWHEEL (20 DEG.) 5 67198-N 1 WASHER, BELLVILLE M20 6 67890 1 NUT, M20 x 1.5 7 A4456 1 3/8” SPECIAL LOCK WASHER 8 56893 23 SCREW, CRIMPTITE #10-24 x .5 LG 9 98769 1 COVER,TOP FLYWHEEL NP50 11 91646 1 DEFLCT., EXHAUST PORT 12 92572 1 ASSY., IGNITION COIL 13 92079 2 SCREW, TAPTITE M6-1.0 x 25MM 14 22717-A 1 GROMMET, RUBBER 15 73132 1 BOOT, SPARK PLUG 16 9 ...