Panasonic DMR-BWT735 Operating Instructions Manual

Please read these instructions carefully before using this product, and save this manual for future use. • This Blu-ray Disc Recorder is for viewing and recording free to view channels only. It does not receive pay TV or encrypted channels. Blu-ray Disc™ Recorder Model No. DMR-BWT735 Region management information BD-Video: This unit can play BD-Video discs supporting the region code “B”. DVD-Video: This unit can play DVD-Video discs supporting the region number “2” or “ALL”. e.g., e.g., 35 2 Model number suffix “EB” denotes UK model. Web Site: http://www.panasonic-europe.com until 2013/04/19 EB

to prevent swallowing. Unit • This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • Do not place sources of naked flames, such as lighted candles, on this unit. • This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone. • This unit is intended for use in moderate climates. Safety precautions WARNING Unit • To reduce the risk of fire, electric shock or product damage, - Do not expose this unit to rain, moisture, dripping or splashing. - Do not place objects filled with liquids, such as vases, on this unit. - Use only the recommended accessories. - Do not remove covers. - Do not repair this unit by yourself. Refer servicing to qualified service personnel. - Do not let metal objects fall inside this unit. - Do not place heavy items on this unit. AC mains lead • To reduce the risk of fire, electric shock or product damage, - Ensure that the power supply voltage corresponds to the voltage printed on this unit. - Insert the mains plug fully into the socket outlet. - Do not pull, bend, or place heavy items on the lead. - Do not handle the plug with wet hands. - Hold onto the mains plug body when disconnecting the plug. - Do not use a damaged mains plug or socket outlet. • The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately. CAUTION Placement • Place this unit on an even surface. • To reduce the risk of fire, electric shock or product damage, - Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. - Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. - Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration. Batteries • Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. • Mishandling of batteries can cause electrolyte leakage and may cause a fire. - Do not mix old and new batteries or different types at the same time. - Do not heat or expose to flame. - Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. - Do not take apart or short circuit. - Do not recharge alkaline or manganese batteries. - Do not use batteries if the covering has been peeled off. - Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place. • When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. 2. Replace the fuse and close or attach the fuse cover. Please check and identify the supplied accessories. (Product numbers are correct as of March 2013. These may be subject to change.) • Do not use AC mains lead with other equipment. Caution for AC Mains Lead Fuse cover Figure A Figure B Figure A Figure B Fuse (5 ampere) Fuse (5 ampere) Supplied accessories Remote control (N2QAYB000758): 1 pc. Batteries for remote control: 2 pcs. AC mains lead (K2CT2YY00098): 1 pc. RF coaxial cable (K1TWACC00003): 1 pc. Indemnity concerning recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit (including any other non-HDD related component). Restriction on use of unauthorized copied content This unit adopts the following technology for copyright protection. Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

Safety precautions . . . . . . . . . . . . . . . . . . . . . .2 Caution for AC Mains Lead. . . . . . . . . . . . . . . .3 Supplied accessories . . . . . . . . . . . . . . . . . . . .3 Getting started HDD and media information . . . . . . . . . . . . . . .6 - Recordable/playable contents. . . . . . . . . . . . . . . . .6 - Recording mode . . . . . . . . . . . . . . . . . . . . . . . . .8 - Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Control reference guide . . . . . . . . . . . . . . . . .12 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - Basic connections . . . . . . . . . . . . . . . . . . . . . . .14 - Amplifier/receiver connections . . . . . . . . . . . . . . .15 - Network connection . . . . . . . . . . . . . . . . . . . . . .17 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 - TV operation buttons . . . . . . . . . . . . . . . . . . . . .18 - Easy Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .19 - Easy Network Setting . . . . . . . . . . . . . . . . . . . . .21 FUNCTION MENU screen . . . . . . . . . . . . . . .23 Watching broadcasts Watching broadcasts . . . . . . . . . . . . . . . . . . .24 - Using Channel List. . . . . . . . . . . . . . . . . . . . . . .24 - Using TV Guide system. . . . . . . . . . . . . . . . . . . .25 - Using channel information . . . . . . . . . . . . . . . . . .25 - Operations while watching broadcast . . . . . . . . . . .26 - REWIND LIVE TV/PAUSE LIVE TV . . . . . . . . . . . .27 Recording Recording TV programmes. . . . . . . . . . . . . . .28 - Operation during Recording . . . . . . . . . . . . . . . . .29 Timer recording. . . . . . . . . . . . . . . . . . . . . . . .30 - Various functions with Freeview . . . . . . . . . . . . . .31 - Manually programming timer recording . . . . . . . . . .32 - Timer recording options. . . . . . . . . . . . . . . . . . . .33 - Timer recording from channel information . . . . . . . .33 - Remote recording from outside . . . . . . . . . . . . . . .34 - Notes on timer recording . . . . . . . . . . . . . . . . . . .34 - To confirm and edit a timer programme. . . . . . . . . .35 Playing back video Playing titles on the HDD . . . . . . . . . . . . . . . .36 - DIRECT NAVIGATOR (VIDEO) screen . . . . . . . . . .36 Playing titles on the media . . . . . . . . . . . . . . .39 - Notes for BD-Live discs. . . . . . . . . . . . . . . . . . . .41 Operation during play . . . . . . . . . . . . . . . . . . .42 - General operations. . . . . . . . . . . . . . . . . . . . . . .42 - 3D video playback . . . . . . . . . . . . . . . . . . . . . . .44 Editing video Deleting recorded titles. . . . . . . . . . . . . . . . . .45 Editing recorded titles . . . . . . . . . . . . . . . . . . .46 Copying video Copying titles . . . . . . . . . . . . . . . . . . . . . . . . .50 - Copying from media other than HDD with DIRECT NAVIGATOR . . . . . . . . . . . . . . . . . . . .52 - Copying titles with copying list . . . . . . . . . . . . . . .52 - Notes for copying. . . . . . . . . . . . . . . . . . . . . . . .55 - Copying a finalised disc. . . . . . . . . . . . . . . . . . . .56 - Copying Title Playing . . . . . . . . . . . . . . . . . . . . .57 - Copying HD Video (AVCHD) to the DVD-R in High Definition . . . . . . . . . . . . . . . . . . . . . . . . .57 Photo Playing photos . . . . . . . . . . . . . . . . . . . . . . . .58 - DIRECT NAVIGATOR (PHOTO) screen . . . . . . . . .58 - Photo play option. . . . . . . . . . . . . . . . . . . . . . . .59 - Slideshow settings . . . . . . . . . . . . . . . . . . . . . . .59 Editing photos. . . . . . . . . . . . . . . . . . . . . . . . .60 Copying photos. . . . . . . . . . . . . . . . . . . . . . . .61 - Selecting and copying the photos . . . . . . . . . . . . .61 - Copying automatically. . . . . . . . . . . . . . . . . . . . .61 Music Playing music . . . . . . . . . . . . . . . . . . . . . . . . .62 - Copying music (MP3) to HDD. . . . . . . . . . . . . . . .62 - Playing music recorded on HDD . . . . . . . . . . . . . .63 - Operations during music play . . . . . . . . . . . . . . . .64 Editing music/playlist . . . . . . . . . . . . . . . . . . .65 With Other Equipment Recording from external equipment . . . . . . . .66 - Manual Recording . . . . . . . . . . . . . . . . . . . . . . .66 - Flexible Recording via AV input. . . . . . . . . . . . . . .66 - Linked timer recording (Set Top Box, etc.) –EXT LINK. . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Copying the HD Video or the SD Video . . . . .68 - Copying HD Video (AVCHD) . . . . . . . . . . . . . . . .68 - Copying SD Video (MPEG2) . . . . . . . . . . . . . . . .69 Smart Home Networking (DLNA) . . . . . . . . . .70 - Using this unit as Server . . . . . . . . . . . . . . . . . . .70 - Using this unit as Client. . . . . . . . . . . . . . . . . . . .71 - Using this unit as Media Renderer . . . . . . . . . . . . .72 Convenient functions VIERA Connect (Enjoying Internet Service) . . . . .73 - To enjoy video communication (e.g., SkypeTM) . . . . .73 Media management . . . . . . . . . . . . . . . . . . . .74

Editing video Copying video Photo Music With Other Equipment Convenient functions Troubleshooting Reference VQT4W68 5 Registering the external HDD (USB HDD) . . 76 - Connecting the USB HDD . . . . . . . . . . . . . . . . . 76 - Disconnecting the USB HDD. . . . . . . . . . . . . . . . 76 - Registering the USB HDD . . . . . . . . . . . . . . . . . 77 VIERA Link functions. . . . . . . . . . . . . . . . . . . 78 Playback menu . . . . . . . . . . . . . . . . . . . . . . . 79 Changing the unit’s settings (Setup) . . . . . . . 81 - Common procedures. . . . . . . . . . . . . . . . . . . . . 81 - Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 - HDD / Disc / USB HDD . . . . . . . . . . . . . . . . . . . 85 - Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 - Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 - Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 - Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 - Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 - Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 - Language code list . . . . . . . . . . . . . . . . . . . . . . 95 Software (Firmware) Update . . . . . . . . . . . . . 96 Other operations . . . . . . . . . . . . . . . . . . . . . . 97 - Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 97 - Switching the aspect ratio of the screen . . . . . . . . . 97 - HOLD function. . . . . . . . . . . . . . . . . . . . . . . . . 97 Troubleshooting Troubleshooting guide. . . . . . . . . . . . . . . . . . 98 - General operation. . . . . . . . . . . . . . . . . . . . . . . 98 - Displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 - TV screen and video . . . . . . . . . . . . . . . . . . . . . 99 - Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 - Recording, timer recording and copying . . . . . . . . 101 - Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 - Edit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 - Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 - Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 - USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - Broadcast. . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - VIERA Link . . . . . . . . . . . . . . . . . . . . . . . . . . 104 - Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 - Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 - Messages on the unit’s display . . . . . . . . . . . . . 106 - When you experience problems with Easy Network Setting . . . . . . . . . . . . . . . . 108 Reference Specifications . . . . . . . . . . . . . . . . . . . . . . . 110 Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 About descriptions in these operating instructions • Pages to be referred to are indicated as “> ±±”.

Getting started For more details, refer also to the specifications. (> 110) (–: Impossible) Recordable/playable contents Media type Standard symbol Recordable contents Playable contents Built-in hard disk drive (HDD)§1 [HDD] • Video • AVCHD/AVCHD 3D • JPEG • MPO (3D photo) • MP3 External hard disk drive (USB HDD)§1 (> 9) [USB_HDD] • Video§2 – • AVCHD/AVCHD 3D§3, 4 • SD Video (MPEG2)§5 • MP4 • Xvid • JPEG • MPEG2 • MKV • MPO (3D photo) • MP3 BD-Video [BD-V] – • Video BD-RE§1 [BD-RE] • Video • AVCHD/AVCHD 3D • JPEG • MPO (3D photo) BD-R [BD-R] • Video • AVCHD/AVCHD 3D§3 – • Xvid • MKV DVD-Video§6 [DVD-V] – • Video DVD-RAM§1 [RAM] • Video • JPEG • MPO (3D photo) – • AVCHD§3 DVD-R DVD-R DL [DVD-R] • Video • AVCHD§3 – • Xvid • MKV • JPEG • MPO (3D photo) • MP3

§2 It cannot be recorded directly. (Only compatible with copying from the built-in HDD) §3 Recorded with AVCHD format compatible devices (Panasonic video camera, etc.). It may not be able to play back, add, or edit depending on the device. §4 It cannot be played back directly from the USB HDD or USB memory. Playback is possible by copying to the built-in HDD. (> 68) §5 Recorded with SD-Video format compatible devices (Panasonic video camera, etc.). It can be played back only after copying to the HDD. (> 69) §6 Includes finalised DVD-R, DVD-R DL, DVD-RW, +R and +R DL. • [+RW] This unit cannot record to 8X Speed +RW disc. • The producer of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully. • With certain recording states and folder structures, the play order may differ or playback may not be possible. Media type Standard symbol Recordable contents Playable contents DVD-RW§1 [DVD-RW] • Video – • AVCHD§3 +R/+R DL [+R] • Video – • AVCHD§3 +RW§1 [+RW] • Video – • AVCHD§3 Audio CD (CD-DA) [CD] – • Music CD (including CD-R/RW) – • Xvid • MKV • JPEG • MPO (3D photo) • MP3 SD Cards§1 [SD] • JPEG • MPO (3D photo) • AVCHD/AVCHD 3D§3 • SD Video (MPEG2)§5 • MP4 • JPEG • MPO (3D photo) USB memory [USB] – • AVCHD/AVCHD 3D§3, 4 • SD Video (MPEG2)§5 • MP4 • Xvid • MPEG2 • MKV • JPEG • MPO (3D photo) • MP3 Playable contents as DLNA client Refer to “Playable contents”. (> 71)

• The video file and subtitle text files are inside the same folder, and the file names are the same except for the file extensions. • Some files may not be played back even if they have these extensions. §1 The SD quality programme can not be converted to HD quality. §2 You cannot select during play whether it activates or deactivates. §3 You cannot select during play whether it appears or disappears. Approximate recording times Refer to “Recording modes and approximate recording times”. (> 114) About extension of files MP4: “.MP4” “.mp4” “.MOV” “.mov” MPEG2: “.MPG” “.mpg” “.MPEG” “.mpeg” “.M2TS” “.m2ts” “.MTS” “.mts” “.TS” “.ts” Xvid: “.AVI” “.avi” Subtitle text files: “.SRT” “.srt” “.SUB” “.sub” “.TXT” “.txt” MKV: “.MKV” “.mkv” Subtitle text files: “.SRT” “.srt” “.SSA” “.ssa” “.ASS” “.ass” “.SUB” “.sub” “.TXT” “.txt” JPEG: “.JPG” “.jpg” MPO: “.MPO” “.mpo” MP3: “.MP3” “.mp3” Recording mode Recording Mode DR HG/HX/HE/HL/HM XP/SP/LP/EP/FR Feature Programmes can be recorded in a nearly perfect broadcasted state. Recording can be done with reduced recording volume in HD quality. Recording can be done with reduced recording volume in SD quality. Quality Quality as the broadcast High definition§1 Standard definition Recordable media Multiple audio Record all multiple audio Record only one audio§2 Audio Description Can be recorded Can be recorded§2 Subtitles Can be recorded Can be recorded (only one subtitle)§3 Surround audio Surround audio as the broadcast Surround audio produced by conversion of broadcast audio format Stereo audio • FR (Flexible Recording Mode) The unit automatically selects the best possible recording rate between XP and EP (8 hours).

simultaneously.) • For recorded titles Moving titles in the built-in HDD to a USB HDD to save the capacity of the built-in HDD. • The USB HDD must first be registered on this unit. (> 76) • For data files Playing back MP4, JPEG, MP3, etc. (data files) in a USB HDD with this unit. • The USB HDD must be formatted in FAT12, FAT16, FAT32 and NTFS file system. • The USB HDD over 2 TB is not usable. • This unit supports USB 2.0 High Speed. • Although this unit can use USB 3.0 devices as USB 2.0 devices, in certain cases USB 3.0 devices cannot be used due to differing connector shape, larger current ratings, etc. (Use of USB 2.0 devices is recommended.) • This unit does not recognize USB HDDs other than those in which the size of one sector is 512-bytes. (For details, consult the dealer of your USB HDD.) • This unit does not guarantee connection with all USB devices. • Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control CDs, etc.) cannot be guaranteed. Notes Notes for an External HDD (USB HDD) Notes for the disc • Disc recorded on another device • It may be necessary to finalize the disc, create Top Menu or close the session on the equipment used for recording to play on this unit. • [DVD-RW] Recorded in DVD Video Recording (DVD-VR) format - This unit can play back and copy to HDD. - This unit does not support editing or recording. - It is possible to record and edit with DVD-Video (DVD-V) format by formatting discs with this unit. • Recording may not be possible to discs which were used for recording on other equipment. • Play on other players • [BD-RE] [BD-R] When these discs cannot be played back on other Blu-ray Disc players, etc. (e.g., title recorded with HE-AAC audio format), convert the recording mode to play them back. (> 48, File Conversion) • [DVD-R] [DVD-RW] [+R] Finalisation is needed. (> 75) • [+RW] If the disc failed to play on other equipment, we recommend you create a Top Menu (> 75). • Regarding 8 cm Disc This unit cannot record or edit the 8 cm disc. Only playback or copy to the HDD is possible. • Discs that cannot be played - DVD-RAM that cannot be removed from their cartridges - 2.6 and 5.2 GB DVD-RAM, 12 cm - DVD-Audio - HD DVD - CD-ROM, Photo CD, PD, etc. - Super Video CD, Super Audio CD, Video CD

To format an SD card Refer to “Format Disc/Format Card”. (> 74) • Usable memory is slightly less than the card capacity. • If the SD card is formatted on other equipment, the time necessary for recording may be longer or the card may not be able to be used on this unit. In these cases, format the card on this unit. • SDHC Memory Cards and SDXC Memory Cards can be used in equipment that is compatible with the appropriate cards. (SDHC Memory Cards can also be used in equipment compatible with SDXC Memory Cards) USB memories support FAT12, FAT16, FAT32 and NTFS file systems. • The USB memory over 2 TB is not usable. • This unit supports USB 2.0 High Speed. • This unit does not guarantee connection with all USB devices. • Do not touch the recorded surface of the discs or the terminal surface of the SD cards. • If there is dirt or condensation on the disc, wipe with a damp cloth and then wipe dry. Notes for the SD cards • Compatible SD card - SD Memory Card (from 8 MB to 2 GB, FAT12 and FAT16 formats) - SDHC Memory Card (from 4 GB to 32 GB, FAT32 format) - SDXC Memory Card (48 GB, 64 GB, exFAT format) • Using miniSD card or microSD card Mini-type and micro-type cards can also be used, but must be used with adaptor cards (optional). Notes for the USB memories Media handling • Do not attach labels or stickers to discs. • Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. • Do not use ballpoint pens or other hard writing implements, when writing on the label side of the disc. • Do not drop, stack, or impact discs. • Do not place objects on discs. • Do not use the following discs: - Discs with exposed adhesive from removed stickers or labels (rental discs, etc.). - Discs that are badly warped or cracked. - Irregularly shaped discs. • Do not expose the terminals of the SD card to water, garbage or other strange things. • Do not place in the following areas: - In hot places, such as under the direct sunlight. - In very dusty or humid areas. - Locations susceptible to significant difference in temperature (condensation can occur). - Where static electricity or electromagnetic waves occur. DO DO NOT DO DO NOT DO NOT

recorded content cannot be recovered. • The unit may breakdown if cigarette smoke or bug spray/vapour, etc. gets inside the unit. Before moving the unit, ensure the disc tray is empty. 1 Switch the unit to standby mode. (Wait until “BYE” disappears from the display.) 2 Remove the AC mains lead from the household mains socket. 3 Move only after the unit has come to a complete stop (approx. 3 minutes) in order to avoid subjecting to vibration and shock. (Even after the unit is switched to standby mode, the HDD continues operating for a short time.) The registration of the USB HDD may be cancelled in the process of repairing this unit. You can use the USB HDD again by re-registering, but all recorded content already on the USB HDD will be lost. In such cases, the recorded content (data) cannot be recovered. This unit may contain private information. Before disposing of or transferring this unit, perform the following to delete the data, including personal or secret information: - Format HDD (> 81, 87) - Perform “Shipping Condition” (> 81, 95) HDD/USB HDD handling care • The HDD is a high precision device The HDD is a high precision recording instrument and is easily susceptible to damage. Therefore, be careful of the following points while the unit is turned on, especially during operation, otherwise the HDD and the recorded content may be damaged: - Do not subject the unit to any vibration and shock. - Do not remove the AC mains lead from the household mains socket. • The HDD is a temporary storage device • The HDD is not an everlasting storage device. It is recommended to save the recorded content on a disc or to keep the original data or CDs that they were copied from. • If you notice a problem with the HDD such as repetitive strange sounds, immediately save (backup) all content and request service. If you continue using the HDD with a problem, the unit or the recorded content will be damaged. Setup precautions • Place the unit on a surface that is flat and not subject to vibration or impact. • Do not place on anything that generates heat like a Set Top Box, etc. • Place in an area where condensation does not occur. Conditions where condensation may occur - When there is an extreme change in temperature (e.g., when subjected to an air conditioner or when cooled air directly impacts the unit). - When there is high humidity or a lot of steam in the room. In the above situation, without turning the unit on, let the unit adjust to the room temperature and wait 2–3 hours until condensation is gone. When moving the unit Cleaning • This unit - Wipe with a soft, dry cloth. - Never use alcohol, paint thinner or benzine to clean this unit. - Before using chemically treated cloth, carefully read the instructions that came with the cloth. • This unit’s lens Use the Lens cleaner (optional) to clean the unit’s lens. Lens cleaner: RP-CL720AE • This lens cleaner may not be available for sale in all countries, e.g. not available in Germany, please consult your Panasonic dealer for advice. When requesting this unit for repair To dispose or transfer this unit

Instructions for operations are generally described using the remote control. 1 Transmit the remote control signal • Point it at remote control signal sensor on this unit. (> 13) 2 Switch the unit from on to standby mode or vice versa 3 Select drive (HDD, BD, SD or USB) 4 Select channels and title numbers, etc./Enter numbers or characters 5 Switch to the previously watched channel (> 24) 6 Basic operations for recording and play, REWIND LIVE TV/PAUSE LIVE TV (> 27) 7 Show Information (> 25, 37, 42) 8 Selection/OK, Frame-by-frame (> 42) 9 Show DIRECT NAVIGATOR, Top Menu, Pop-up Menu (> 36) : Show OPTION menu (> 46, 60, 65) ; Colour buttons (Use in accordance with instruction on the screen.) < Start recording (> 28, 66) = Select a conversion mode/recording mode (> 28, 66) > Show the Timer Recording screen (> 32) ? Create chapter (> 43) @ Input select (> 24, 66) A Listen to Audio Description (> 26, 43) B TV operation buttons (> 18) C Channel select (> 24)/Change pages in the DIRECT NAVIGATOR screen etc. D Show the VIERA Connect screen (> 73) E Switching to the radio channel list (> 24) F Start up a video communication (> 73) G Exit the menu screen H Show the TV Guide screen (> 25) I Show the FUNCTION MENU screen (> 23) J Return to previous screen K Show subtitles (> 26, 43) L Show Digital teletext (> 26) M Show NETFLIX screen (> 73) N To delete unwanted recorded titles, timer programmes, photos or music (> 45) O Skip approx. 1 minute forward (> 43) P Skip approx. 10 seconds backward (> 43) Insert batteries Insert so the poles (i and j) match those in the remote control. Remote control STATUS F U N C T I O N M E N U D I R E C T N A V I G A T O R G U I D E BACK/ RETURN PLAY/x1.3 PAUSE PAUSE LIVE TV STOP SLOW/SEARCH SKIP CH PAGE TV RADIO/ CH AV INPUT  TV DRIVE SELECT  EXIT OK OPTION VOL 0 2abc 5jkl 8tuv 1 4ghi 7qrs p 3def 6mno 9xyz w PROG/CHECK AD NETFLIX -10s +60s REC MODE INPUT SELECT REC TEXT STTL CHAPTER MANUAL SKIP REWIND LIVE TV INTERNET LAST VIEW DEL                                 R6/LR6, AA (Alkaline or manganese batteries)

unit to standby mode or remove the media. Such action may result in loss of the media contents. • When inserting the media, ensure that it is facing the right way up. Main unit 1 Standby/on switch (Í/I) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 Open/close disc tray 3 Disc tray 4 USB port 5 SD card slot • When removing the SD card, press on the centre of the card and pull it straight out.   Pull to flip down the front panel.    SD card USB memory Disc 6 Recording indicator • The indicator will light up while recording. • The indicator will blink while recording is paused and before recording starts. 7 Remote control signal sensor • Angle: Approx. 20° up and down, 30° left and right • Distance: Within approx. 7 m in front of the unit 8 Stop 9 Start play : CALL LED • The LED will light up when this unit receives incoming call etc. of the video communication. (> 73) Display 1 Drive (HDD, BD or SD) indicator 2 Disc indicator 3 Copying indicator 4 USB port indicator 5 SD card slot indicator 6 EXT LINK indicator 7 Timer recording indicator • This indicator lights up when the timer recording standby is activated. 8 Remote control signal indicator 9 Main display section indicator - Current time - Playback counter - Various messages (> 106) 10 Playback indicator      Display PLAY COPY EXT -L SD USB HDD SD BD 1 2 5 6 7 8 4 3 9 10

• Before connection, turn off all equipment and read the appropriate operating instructions. To connect and register the USB HDD (optional) Refer to “Registering the external HDD (USB HDD)”. (> 76) To connect the Communication Camera (optional) Refer to “VIERA Connect (Enjoying Internet Service)”. (> 73) About HDMI cable Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI Cables 5.0 meters or less. Basic connections AV IN (EXT) VIDEO S VIDEO HDMI VHF/UHF RF IN This unit’s rear panel Household mains socket (AC 220 to 240 V, 50 Hz) Cooling fan AC mains lead (supplied) • Connect only after all other connections are complete. HDMI cable To the aerial Aerial cable RF coaxial cable (supplied) TV’s rear panel

HDMI terminal. • Keep the RF coaxial cables as far away as possible from other cables. • Do not roll up the RF coaxial cables. • The HDMI connection supports VIERA Link “HDAVI Control” (> 78). • You cannot connect this unit to DVI devices that are incompatible with HDCP. Depending on the device, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.) • If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.) § A 21-pin Adaptor is required for AUDIO/VIDEO terminal. • VIERA Link function is possible by connecting to a TV or amplifier/receiver compatible with VIERA Link. • When using a TV or an amplifier/receiver that does not display “ARC compatible” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver. When the unit is not to be used for a long time To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when the unit is in standby mode. [approx. 0.2 W (“Quick Start” is not activated and “RF OUT ( Aerial Signal )” is set to “Off”)] Connect the Set Top Box or video equipment AV IN (EXT) VIDEO S VIDEO AV Set Top Box or video equipment 21-pin Scart cable § Amplifier/receiver connections HDMI terminal HDMI HDMI IN HDMI OUT HDMI cable Amplifier/ receiver TV HDMI cable (ARC compatible) (ARC compatible) 3D programmes can be played back when this unit is connected to a 3D compatible amplifier/receiver and a 3D compatible TV. • You will not be able to view 3D programmes with this connection if your amplifier/receiver is not 3D compatible.

• VIERA Link function is possible by connecting to a TV or amplifier/receiver compatible with VIERA Link. • When using a TV or an amplifier/receiver that does not display “ARC compatible” on the HDMI terminal, it is necessary to connect the TV and the amplifier/receiver with a digital audio cable to enjoy the TV audio on the amplifier/receiver. ∫Using Optical digital audio cable ∫Using Coaxial cable • When you do not want the audio to be output from the TV, set “HDMI Audio Output” to “Off” (> 81, 90). • Connect to terminals of the same colour. HDMI IN HDMI HDMI HDMI cable Amplifier/receiver TV HDMI cable (ARC compatible) (ARC compatible) 3D programmes can be played back when this unit is connected to a 3D compatible TV. • This connection only supports up to 5.1ch. DIGITAL AUDIO OUT terminal AUDIO OUT terminal AV IN VIDEO S VIDEO OPTICAL IN Amplifier/receiver Optical digital audio cable AV IN VIDEO S VIDEO COAXIAL IN Amplifier/receiver Coaxial cable AV IN (EX VIDEO S VIDEO AUDIO IN L R Audio cable Amplifier/receiver

can enjoy network functions (DLNA function, VIERA Connect, Remote Recording, etc.). For details about connection method, refer to the instructions supplied with the connected equipment. After you make the LAN cable/Wireless LAN connection, the network setting is needed. (> 21, Easy Network Setting) • Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. • Inserting any cable other than a LAN cable in the LAN terminal can damage the unit. • For up-to-date compatibility information on your Wireless router refer to http://panasonic.jp/support/global/cs/ (This site is in English only.) • The unit is not compatible with public wireless LAN services. Network connection ∫Precautions of Wireless LAN connection The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit. • Data transmitted and received over radio waves may be intercepted and monitored. • This unit contains delicate electronic components. Please use this unit in the manner in which it was intended and follow the following points: - Do not expose this unit to high temperatures or direct sunlight. - Do not bend, or subject this unit to strong impacts. - Keep this unit away from moisture. - Do not disassemble or alter this unit in any way. LAN cable connection Wireless LAN connection Broadband router, etc. Internet LAN (ethernet) cable Internet Wireless router, etc.

buttons of the remote control. • Perform the setting if you cannot operate the TV with the TV operation buttons. While pressing [TV Í], enter the code with the number buttons. Manufacturer and Code No. • If the brand of your TV is not listed or the code number is invalid for the TV, this remote control is not compatible with your TV. • If your TV brand has more than one code listed, select the one that allows correct operation. TV operation buttons (> right) Select and enter buttons To return to the previous screen To exit the screen FUNCTION MENU (> 23) STATUS D I R E C T N A V I G A T O R G U I D E BACK/ RETURN PLAY/x1.3 PAUSE PAUSE LIVE TV STOP SLOW/SEARCH SKIP CH PAGE TV RADIO/ CH AV INPUT  TV DRIVE SELECT  EXIT OK OPTION VOL 0 2abc 5jkl 8tuv 1 4ghi 7qrs p 3def 6mno 9xyz w DEL PROG/CHECK AD NETFLIX REC MODE INPUT SELECT REC TEXT STTL CHAPTER REWIND LIVE TV INTERNET LAST VIEW F U N C T I O N M E N U -10s +60s MANUAL SKIP TV operation buttons Brand Code Brand Code AIWA 35 BENQ 58/59 BRANDT 10/15 CENTREX 66 CURTIS 05 DESMET 05 ELEMIS 05 FINLUX 61 Panasonic 01/02/03/04 AKAI 27/30 BEKO 05/71/72/73/74 BUSH 05 DAEWOO 64/65 DUAL 05 FERGUSON 10/34 FISHER 21 MITSUBISHI 05/19/20/47 METZ 05/28/79 MIVAR 24 NEC 36 NOKIA 25/26/27/60/61 OLEVIA 45 ORION 05 PHILCO 41/48/64 PHONOLA 05 PROVIEW 52 RADIOLA 05 NOBLEX 33 NORDMENDE 10 ONWA 30/39/70 PEONY 49/69 PHILIPS 05/06/46 PIONEER 37/38 PYE 05 SABA 10 FUJITSU 53 ITT LG GOLDSTAR 05/50/51 GRADIENTE 36 25 JVC 17/30/39/70 KOLIN 45 05/50/51 MAG 52 FUNAI 63/67 GOODMANS 05 GRUNDIG 09 IRRADIO 30 KDS 52 KONKA 62 HITACHI 05/22/23/40/41 SALORA 26 SANSUI 05 32/42/43/65/68 SAMSUNG SCHNEIDER 05/29/30 SELECO 05/25 SIEMENS 09 SONY 08 TELEFUNKEN 10/11/12/13/14 TOSHIBA 16/57 YAMAHA 18/41 05 WHITE WESTINGHOUSE SANYO 21/54/55/56 05/69/75/76/77/78 SEG SINUDYNE 05 31/33/66/67/69 TCL TEVION 52 THOMSON 10/15/44 SHARP 18

AV input to suit the connections to this unit. 2 Press [Í] on the remote control or [Í/I] on this unit. • The Easy Setting will start at the initial power on. Auto Setup starts. (This operation may take some time.) e.g., After tuning has been completed, clock will be set automatically. • If the region selection screen appears, select repeatedly until you reach the available region. • If the clock setting screen appears, set the time manually (> 94, Clock). 3 Enter the PIN. This PIN will be used only for the Owner ID-Data Entry screen. 1 Press the number buttons to enter 4-digit PIN. 2 Repeat step 1 to confirm. • Make a note of PIN in case you forget it. The PIN number cannot be reset. • Steps 3 – 5 will be skipped in the Easy Setting after “Shipping Condition” (> 95) is performed. (> go to step 6 on page 20) 4 Set the Owner ID-Data Entry (“NAME”, “HOUSE NO” and “POSTCODE”). e.g., 1 Select the item, then press [OK]. 2 Select the character, then press [OK]. Repeat this step. 3 Press [BACK/RETURN ]. 4 Repeat steps 1-3 to enter all data. 5 Press [BACK/RETURN ] to exit from the Owner ID-Data Entry screen. 5 Enter the new PIN for parental control. • The default PIN is “0000”. 1 Enter the new 4-digit PIN with the number buttons. • Make a note of the PIN you have decided on in case you forget it. 2 Press [OK]. Easy Setting Progress DVB Auto Setup CH 21 68 CH Free TV: 2 Pay TV: 0 Data: 0 Radio: 0 Searching Actual number of channels may differ due to channel duplication. Quality Type Channel Name RETURN This will take about 3 minutes. 35 10 10 35 Free TV Free TV Owner ID Please enter new PIN PIN 0 PIN entry 9 You now have the opportunity to enter your details and help the police to crack crime. See Instruction Book. * * * * RETURN Owner ID-Data Entry NAME HOUSE NO POSTCODE PIN 0000 RETURN Change PIN Select 0 Number 9 - PIN Entry Enter a new 4-digit PIN, then press OK. This PIN will be used for controlling viewing and playback. PIN will be set to “0000” by pressing “RETURN” when there is no number input. - - - RETURN

Setting for Quick Start”, then press [OK]. When “Easy Setting has been completed.” appears, Easy Setting is complete. • Select “Yes” to proceed to “Easy Network Setting”. (> 21) • Select “No” to finish the Easy Setting. To stop partway Press [BACK/RETURN ]. To restart setup 1 Press [FUNCTION MENU]. (> 18) 2 Select “Setup” in “Others”, then press [OK]. 3 Select “Auto Setup” in “Tuning”, then press [OK]. 4 Select “Yes”, then press [OK]. To display the Owner ID information on TV 1 While the unit is on, press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds. - “00 RET” is displayed on the unit’s display. 2 Repeatedly press [1] (right) on the remote control until “01 OID” is displayed on the unit’s display. 3 Press [OK] on the remote control. The PIN is not displayed. To confirm that channels have been tuned correctly Refer to “Using Channel List”. (> 24) To change PIN for parental control Refer to “PIN Entry”. (> 94) To change the region for Channel Sorting Refer to “Channel Sorting by Region”. (> 84) • If tuning is cancelled partway through, it may not be possible to receive the channels. Restart setup again. • On It is possible to start quickly from standby mode. • Off Power consumption in standby mode is minimized. (> 110) However, startup time from standby mode will be longer. • Timer Setting for Quick Start “Quick Start” is activated when the set time comes. (If the clock has not been set, this function is not activated at all hours.) Quick Start On Off Timer Setting for Quick Start 6:00 23:00

with “Easy Network Setting”. 1 Select “Wired” or “Wireless”, then press [OK]. 3 When “Easy Network Setting is finished.” appears. Press [OK]. • If your wireless network is encrypted, Encryption Key Input Screen will be displayed. Input the encryption key of your network. Easy Network Setting 2 Follow the on-screen instructions and make the following confirmation and settings. “Wired” connection: - Home Network Connection Check - Home Network function - Remote Recording function - Internet Connection Test “Wireless” connection: • Before beginning wireless connection setup obtain your Network name (SSID). An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices. - Wireless Settings - Home Network Connection Check - Home Network function - Remote Recording function - Internet Connection Test OK RETURN Easy Network Setting Settings and tests for connection required for home network and the Internet will be conducted. First, please select a connection mode. LAN cable connection: Connect a LAN cable to the unit and select “Wired”. Wireless LAN connection: Select “Wireless”. Current setting : Wired Wired Wireless Connection method to wireless access point Search for wireless network: 1 Select “Search for wireless network”, then press [OK]. 2 The available wireless networks will be displayed. Select your network name and press [OK]. - If your Network name is not displayed search again by pressing the red button on the remote control. - Stealth SSID will not be displayed. Enter manually by using “Wireless Settings”. (> 81, 91) WPS (PUSH button): If your Wireless router supports WPS (PUSH button), you can easily perform the settings by pressing WPS button on it. WPS (Wi-Fi Protected Setup™) is a standard that facilitates settings relating to the connection and security of wireless LAN devices. 1 Select “WPS (PUSH button)”, then press [OK]. 2 Press WPS button or corresponding button of Wireless router until the lamp starts flashing. • Wi-Fi Protected Setup™-compatible Wireless router may have the mark. • For details, refer to the operating instruction of Wireless router. 3 Press [OK]. e.g.,

Refer to “When you experience problems with Easy Network Setting”. (> 108) To restart Easy Network Setting 1 Press [FUNCTION MENU]. (> 18) 2 Select “Setup” in “Others”, then press [OK]. 3 Select “Easy Network Setting” in “Network”, then press [OK]. To redo settings individually If “Easy Network Setting” did not work properly or when you change the settings individually, perform the following steps: 1 Press [FUNCTION MENU]. (> 18) 2 Select “Setup” in “Others”, then press [OK]. 3 Select “Network Settings” in “Network”, then press [OK]. 4 Refer to “Network Settings”. (> 91) Check security before using Home Network function If you set “Home Network function” to “On”, all connected devices on the same network can access this unit. Ensure that the router for your home network has adequate security system to prevent unauthorized access. • Refer to the operating instructions of the hub or router. • If you set “Home Network function” or “Remote Recording function” to “On”, the setting for “Quick Start” is fixed to “On”. • Do not use this unit to connect to any wireless network for which you do not have usage rights. During automatic searches in a wireless network environment, wireless networks (SSID) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access. • After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router. • Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.

You can easily access the desired functions, such as playback, timer recording, the unit’s settings etc. via the FUNCTION MENU. 1 Press [FUNCTION MENU]. 2 Select the item, then press [OK] • Selectable items will change depending on the type and status of the media. FUNCTION MENU Drive Select OK RETURN Timer Recording Copy Others Disc / SD Card / USB / USB HDD Network Playback Contents TV Guide HDD Timer Recording Playback Contents TV Guide Video Photo Music BACK/ RETURN Press OK Press e.g., FUNCTION MENU list FUNCTION MENU Playback Contents Video (> 36) Video (AVCHD) (> 40) Video (MP4) (> 39) Photo (> 58) Music (> 62) Top Menu (> 39) Menu (> 39) TV Guide (> 25) Timer Recording (> 32) Copy Copy Video (> 52) Copy Video (AVCHD) to DVD-R (> 57) Network Home Network ( DLNA Client ) (> 71) Home Network ( Media Renderer ) (> 72) Network Service (> 73) Remote Recording (> 34) Others Ext Link Standby (> 67) Playlists (> 39) Flexible Recording via AV input (> 66) Copy Video ( AVCHD ) (> 68) Copy Video ( MPEG2 ) (> 69) Copy New Photos (> 61) Blu-ray Disc Management (> 74) DVD Management (> 74) SD Card Management (> 74) BD-Video Data Management (> 41) Setup (> 81) • You can change the unit’s settings of Tuning, Sound, Display, Connection, Network etc. in the Setup menu. Drive Select HDD Blu-ray Disc / DVD SD Card USB Device USB HDD

watched Press [LAST VIEW ]. • This function will work only for the channels you have watched for more than 10 seconds. To switch to the radio channels or to the all channels Press [RADIO/TV]. • When you are watching the 3D programme, subtitles and TV Guide, etc., may not display correctly depending on the settings. (> 44, 3D Type, Signal Format) If you have locked channels (> 85, Child Lock List), you may be asked to enter the PIN. In that case, enter the 4-digit PIN with the number buttons by following the on-screen instructions. • PIN can be changed via “PIN Entry”. (> 94) You can select from the list of channel names. 1 Press [OK]. 2 Select the channel, then press [OK]. To edit the channel list Refer to “Channel List”. (> 83) • Encrypted channels cannot be watched. Instructions for operations are generally described using the remote control. (> 12) 1 Press [INPUT SELECT] and select “TV”, then press [OK]. 2 Press [CH W X] to select the channel. • You can also select the channel by the following operations. - Using number buttons - Using Channel List (> right) - Using TV Guide system (> 25) - Using channel information (> 25) About the PIN for parental control Using Channel List All DVB Channels Select View RETURN 7 6 5 4 3 2 1 Page down Page up Channel names Encrypted channel

2 Select the programme, then press [OK]. 3 Select “View”, then press [OK]. Page up/down Press [CH W X]. To view a programme list for another day Press the green button (Previous) or the yellow button (Next). To see programme information Press [STATUS ]. To retrieve the programme data for the area where data have not been acquired Select the area, then press [STATUS ]. • Some broadcasters may not send the programme data. You cannot retrieve the data from them. To set a timer Recording using the TV Guide System Refer to “Timer recording”. (> 30) • Selection of channel is made easy by creating a Favourite of the channels you watch often. (> 83, Favourites Edit) • If you make access to Rovi Guide via VIERA Connect, you can use an additional TV Guide which can search programmes by keywords and can display the detailed information, etc. (current as of March, 2013). (> 73) While watching a programme Press [STATUS ]. Channel information appears. 1 Set timer (> 33) 2 Current Category 3 Programme with Guidance information for parental control (> 86, Child Lock) 4 Audio Description 5 Subtitle 6 Digital teletext 7 Multiple audio To show detailed information Press [STATUS ] again. To hide the information screen Press [EXIT ]. To change Category Press the blue button. To switch between the current programme and the next programme Press [2, 1]. To switch to another channel Press [3, 4], then press [OK]. Using TV Guide system Page Down Information Page Up Category +24 hours Timer Rec. TUE 01/01 8:00 - 9:45 TUE 01/01/2013 8:05 Category: All DVB Channels 8:00 8:30 9:00 9:30 10:00 10:30 OK RETURN Using channel information • To register your favourite channels 1 Press [OPTION]. 2 Select “Digital TV Menu”, then press [OK]. 3 Select “Favourites Edit”, then press [OK]. 4 Refer to “Favourites Edit”. (> 83) HDD 71:20 DR 1 10:30 1 Now MPEG STTL TEXT Change category All DVB Channels 9:00 - 11:00 Set timer 10:30 1 Now AD MPEG Change category All DVB Channels 9:00 - 11:00 Set timer        STTL TEXT Multi Audio G e.g.,

(> 25) Press [STTL ]. • Press again to hide subtitle. When “Multi Audio” appears in channel information (> 25) 1 Press [OPTION]. 2 Select “Multi Audio” in “Digital TV Menu”, then press [OK]. 3 Select the desired audio. • Press [EXIT ] to exit from the screen. Audio Description adds an additional soundtrack to describe events on screen (narration) and aids understanding and enjoyment, particularly for visually-impaired viewers. When “AD” appears in channel information (> 25) 1 Press [AD]. 2 Select “Audio Description” and set to “Automatic”. 3 Select “Volume”, then adjust the volume with [2, 1]. • Audio Description may not be available depending on the type of audio format. • When “Dolby D / Dolby D + / Dolby TrueHD”, “MPEG” or “HE-AAC” is set to “Bitstream”, the Audio Description may not work. Set them to “PCM” (> 88, Digital Audio Output). • You can also set “Audio Description” active in the Setup menu. (> 85) When “TEXT” appears in channel information (> 25) 1 Press [TEXT ]. 2 Use [3, 4, 2, 1], number buttons or colour buttons, etc. according to on-screen instructions. • Some functions of Digital teletext are deactivated during recording. • “Freeview Players” applies access control for some MHEG services. If you have locked viewing of Digital teletext (MHEG) (> 85, Freeview Players), PIN is required to start viewing. You can switch the screen mode. Refer to “Switching the aspect ratio of the screen”. (> 97) Operations while watching broadcast To show subtitle Switching audio To listen to the Audio Description To show Digital teletext (MHEG) Aspect

you are watching with this unit’s tuner on HDD. REWIND LIVE TV You can rewind live TV programme to the point where temporary save has started (up to 1.5 hours). • REWIND LIVE TV does not work when watching a programme via external input. PAUSE LIVE TV You can pause live TV programme and restart watching from the paused position. While pausing or rewinding a broadcast: Press [STATUS ]. • Press [STATUS ] again. While pausing a programme via external input: Press [STATUS ]. 1 The time that you can rewind the live programme. 2 The amount of time temporarily saved on HDD. 3 The time of the current playback position. To stop REWIND LIVE TV or PAUSE LIVE TV 1 Press [STOP ∫]. 2 Select “Yes”, then press [OK]. To hide the display information Press [EXIT ]. • The unit cannot rewind and play more than 1.5 hours prior to the current time. • Temporary save stops in the following cases: - When switching to other channels or other screen - When recording of the watching programme is started - When two programmes simultaneous recording is started - When performing PAUSE LIVE TV or REWIND LIVE TV for more than 8 hours (This may vary depending on the HDD free space.) • These functions do not work in the following cases: - When the clock is not set - While recording two programmes simultaneously - While copying - While watching a programme being recorded - When a radio programme is selected - REWIND LIVE TV: When “REWIND LIVE TV” is set to “Off” (> 86) - PAUSE LIVE TV: When a timer recording via external input is started while watching a programme via external input • PAUSE LIVE TV: You can operate this unit with the TV remote control by using VIERA Link (> 78). Refer to the TV operating instructions. REWIND LIVE TV/PAUSE LIVE TV 1 While watching TV REWIND LIVE TV: Press [SLOW/SEARCH 6] to rewind. PAUSE LIVE TV: Press [PAUSE ;] to pause. • The maximum amount of the temporary save is 1.5 hours. 2 When you want to resume: Press [PLAY/a1.3 1]. • You can perform search or Quick View, etc. • If temporary save stops (> right), playback will be performed by that point. Display information Pause 8:05 9:35 8:50    8:50:55 01/01/2013 Play  8:50.50 8:50:55 01/01/2013 Play   8:50.50

Recording To convert the recording mode after recording in DR mode Refer to “File Conversion”. (> 48) To confirm whether the conversion is completed Refer to “To confirm whether the conversion is completed”. (> 49) To cancel a conversion Refer to “To cancel a “During standby” conversion”. (> 49) • One recording will terminate when simultaneous recording is being done and timer recording starts. • Digital teletext will not be recorded. • Following contents or media cannot be played back while recording. - Xvid and MKV file - photo - USB HDD (For data files) and USB memory • Copying cannot be performed while recording. • When “Automatic Standby after OTR” is set to “On” (> 93), this unit is turned to standby mode if this unit is not operated for approximately 5 minutes after completing “Automatic Stop” or “Recording Time”. • The title before conversion (the title recorded in DR mode) will be deleted once the conversion is completed. • Conversion will take about the same time as the recorded duration. • When the HDD does not have enough remaining space, conversion will not start. • Conversion is stopped when this unit is turned on. Conversion will start from the beginning again once the unit is switched to standby mode. • The conversion will not start if the timer recording is scheduled within the time required for the conversion. • When converted, audio content and subtitle will be converted with the same settings as at the start of recording. • This operation will only record to built-in HDD. • This unit can record two programmes being broadcasted at the same time. 1 Select the channel to record. 2 Press [REC MODE] and select the conversion mode, then press [OK]. • This unit will record the programmes in DR mode once, and then automatically convert to the selected recording mode while this unit is in standby. • Recording mode (> 8) • The conversion mode set here is used as an initial value for the next recording. 3 Press [REC ¥]. Recording starts. • “REC1” or “REC2” will light on the unit’s display. 4 Select “Automatic Stop”, then press [OK]. • One touch recording (OTR) Recording stops automatically when the programme ends. • You can also select “Recording Time” or “Continuous recording”. (> right) HG HX HE HL HM XP SP LP EP Off (DR) Conversion Mode Setting OK RETURN HDD Remain: (DR) m h High Definition Data Size Large Small Large Small Standard Definition Automatic Stop (Guide Link) at 8:45 REC1/OTR Recording Time Continuous recording 30 min 8:00 - 8:45 To set the recording time 1 Select “Recording Time” or “Continuous recording” in step 4 (> left). Recording Time: You can set the length of recording time from 30 minutes to 4 hours. • You can select the recording time with [2, 1]. Continuous recording: The recording is continued until you press [STOP ∫]. 2 Press [OK].

Press [STOP ∫]. When recording one programme: If the following screen appears Select “Yes”, then press [OK]. When recording two programmes: If the following screen appears 1 Select the programme, then press [OK]. 2 Select “Yes”, then press [OK]. After displaying the recording programme, press [PAUSE ;]. • Press again to restart recording. (A title is not split into separate titles.) • Timer recording programme cannot be paused. While recording, perform steps 1–4 on page 28. • Channel or input can only be switched between the recording programmes. You can play the recording title from the beginning or the titles previously recorded to the HDD. Operation during Recording To check the recording programme To stop recording REC2 HDD REC1/OTR AUTO 5 Recording programme displayed on the TV Recording programme not displayed on the TV Stop Recording Yes No Recording of this programme is in progress. Stop this recording ? OK RETURN 1 Stop Recording 2 recordings are in progress. Which recording would you like to stop ? OK RETURN 1 2 To pause recording To record two programmes simultaneously Simultaneous rec and play 1 Press [DIRECT NAVIGATOR]. • If the DIRECT NAVIGATOR screen of music is displayed, press the red button, then select “VIDEO”. “[” is displayed on the recording programme. 2 Select the title, then press [OK]. Page Select OPTION Start Time Prog.Type: Rec Time Play RETURN PHOTO / MUSIC Channel Date Title Name Delete Drama 9:00 0h10m 04/10 04/10 29/10 29/10

Refer to “Using TV Guide system”. (> 25) To select the programmes of a specific category 1 On the TV Guide screen: Press the blue button. 2 Select the item, then press [OK]. • To return to the previous TV Guide list Select “All DVB Channels”. To edit the timer recording on the TV Guide screen 1 Select the programme to edit, then press the red button. 2 Select “Timer Rec Edit”, then press [OK]. 3 Go to step 3 on page 32, “Manually programming timer recording”. • Some options cannot be changed when “Guide Link” is effective. (> 31, 33) To cancel a timer recording on the TV Guide screen 1 Select the programme to cancel, then press the red button. 2 Select “Timer Rec Cancel”, then press [OK]. (“F” disappears) If the screen for selecting single or series timer recording appears Select “Single Timer Rec.” or “Series Timer Rec.” (> 31), then press [OK]. If “Programme Selection” screen appears Depending on the signal sent from the broadcaster, both High Definition picture programme and Standard Definition picture programme exist. Select the programme, then press [OK]. • This operation will only record to built-in HDD. • This unit can record two programmes being broadcasted at the same time. Preparation If you want to change the recording mode: Press [REC MODE] and select the recording mode, then press [OK]. 1 Press [GUIDE]. TV Guide screen appears. 2 Select the programme, then press the red button. The timer icon “F” (red) is displayed. • If on-screen instructions are displayed, follow them. Page Down Information Page Up Category +24 hours Timer Rec. TUE 01/01 8:00 - 9:45 TUE 01/01/2013 8:05 Category: All DVB Channels 8:00 8:30 9:00 9:30 10:00 10:30 OK RETURN Programme Selection SUN 01/01/2012 19:40 Channel Schedule Contents MON 02/01 23:00 - 0:00 TUE 03/01 23:00 - 0:00 3/6 Comedy-drama series about housemates who are actually awere... 3/6 Comedy-drama series about housemates who are actually awere... HD RETURN The same programme in High Definition picture quality exists. Please choose programme. OK

appears You can eliminate the overlapping or may change with repeat event for the duplicated programme. 1 Select “Change”, then press [OK]. 2 Follow the on-screen instructions. Operation during Recording Refer to “Operation during Recording”. (> 29) • This unit has several functions that enable timer recordings to be controlled by the signal sent from the broadcaster. (> right) If the signal is not sent correctly, the recording may lack the beginning or the ending part of the programmes. • Category may not be assigned correctly depending on the programme information. • Some broadcasters may not send programme information. When programme information is not displayed correctly, use manual timer recording. (> 32) • The receipt of the TV Guide data via Set Top Box is not possible. • When timer recording from the external equipment, use manual timer recording. (> 32) • Titles recorded using “Series Timer Rec.” are bundled and displayed as a “group” in the DIRECT NAVIGATOR screen (> 36). • If the unit cannot record the selected programme, the unit will record the repeat programme if it is available. However, this unit will not record the repeat programme, if any part of the selected programme is recorded. • The series recording will be cancelled if there has been no episode of the series for 13 weeks. Guide Link The recording’s start and stop times can be controlled by the broadcaster, e.g. delayed start. • This is indicated by “Guide Link” in the Timer Recording screen (> 33). • The “Guide Link” function may not work if you manually change the start time or the stop time over 10 minutes. Series Timer Recording You can record all the episodes of a series by setting just one timer recording. • To check the schedule of the series On the Selection Screen (> 32, Recording recommended programme, step 1): Press the blue button. Split Programme You can record a programme separated into two or more parts by some other programmes, e.g. news. When setting timer from the 1st split programme, other parts of the programme will be automatically set and indicated by the timer icon on the TV Guide. • This is indicated by “Split” in the Timer Recording screen (> 33). Red: Delete programme Green: Record Repeat programme Yellow: Exit (Overlapping is not resolved) Timer programme overlaps with others. Some part or all of programmes may not be recorded completely. OK RETURN Overlapped Timer Recording Keep Change Please delete unnecessary programme to resolve. OK RETURN Overlapped Timer Recording New Programme Confirm Delete Repeat THU 11/10 23:15 - 23:45 TWO Wales Existing Programmes THU 11/10 23:00 - 23:30 Holiday THU 11/10 23:00 - 23:30 Animals Episode 01/ 02 R S Various functions with Freeview F Programme for which you set the timer recording The episode to be recorded Repeat programme High definition programme Series Information TUE 01/01/2013 19:40 TUE 01/01 23:00 - 0:00 2/6 Comedy-drama series about housemates who are actually awere... HD Channel Schedule Contents WED 02/01 23:00 - 0:00 THU 03/01 23:00 - 0:00 3/6 Comedy-drama series about housemates who are actually awere... 3/6 Comedy-drama series about housemates who are actually awere... S S HD HD RETURN S R HD

recommends. 1 On the TV Guide screen: Select the programme, then press [OK]. 2 Select “Recommended”, then press [OK]. 3 Select the programme, then press [OK]. • If the screen for selecting single or series timer recording, or “Programme Selection” screen appears, refer to page 30. 4 Press [OK]. The timer icon (red) is displayed on the Recommendation List. • To exit from the screen Press [EXIT ]. To cancel the timer recording on the Recommendation List 1 Select the programme with the timer icon (red), then press [OK]. 2 Select “Yes”, then press [OK]. (The timer icon disappears.) • “Recommended” cannot be selected if there is no recommended programme. 1 Press [PROG/CHECK]. 2 Select “New Timer Programme”, then press [OK]. To confirm and edit the timer programme Refer to “To confirm and edit a timer programme”. (> 35) Operation during Recording Refer to “Operation during Recording”. (> 29) • When recording from the external equipment, “Mode” (recording mode) is XP, SP, LP, EP or FR. Recording recommended programme (Recommendation Booking) Selection Screen TUE 01/01/2013 19:40 RETURN OK Drama TUE 01/01/2013 20:00 - 21:00 View Single Timer Rec. Series Timer Rec. Delete Recommended Series Info SAT 10/03 19:45 - 20:00 Recommendation List Manually programming timer recording 3 Select the items and change the items. (> 33, Timer recording options) 4 Press [OK]. The timer programme is stored. Channel Name Schedule Mode Space OK RETURN Page Up Page Down Turn Timer Off Resolve overlap Total 0/32 Timer Recording 30:30 DR HDD TUE 01/01/2013 8:05 Delete New Timer Programme Info Channel Name Schedule Mode Space Timer Recording 30:30 DR HDD TUE 01/01/2013 8:05 New Timer Programme OK Programme Name MON 02/01 8:00 - 9:00 DR

Channel • You can select Category/AV with the red button. Start/Stop • Press and hold [3, 4] to alter in 15-minute increments. Mode/Conv. Refer to step 2. (> 28) Subtitles (Only when item other than “OFF” is selected in “Conv.”) Title Name 1 Select “Title Name”, then press [OK]. 2 Refer to “Entering text”. (> 97) You can make timer recording of the current or next programme. 1 While watching a programme Press [STATUS ]. 3 Press the yellow button. 4 Go to step 3 on page 32, “Manually programming timer recording”. • Some options cannot be changed when “Guide Link” is effective. (> 31) Timer recording options Day/Date • You can select “Date” or “Weekly” by pressing the green button. • Auto Renewal Recording (Only daily/weekly/series timer recording) The unit will record the new programme over the old one. Press the yellow button. “Renew : ON” is displayed. Timer Recording TUE 01/01/2013 8:05 30:24 DR Channel 1 TUE 01/01 Day/Date Stop 8:00 9:00 Start RETURN Category/ AV Date/ Weekly Title Name DR OFF Mode OFF Conv. Subtitles OK HDD e.g., Timer recording from channel information 2 Display the channel information of a programme to record. • Switch the programme with [2, 1]. • Switch the channel with [3, 4]. 10:30 1 Now MPEG Change category All DVB Channels 9:00 - 11:00 Set timer STTL TEXT e.g.,

PC, etc. away from home. (You must register to a service to use this function.) For details, please check the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.) Preparation • Network connection (> 17, 21) • Remote Recording Function Settings (> 81, 92) • This unit will always be connected to the Internet when this function is activated. • Please note that a regular maintenance or unexpected trouble may interrupt the service, and that the service content may be changed or revoked and operation menu screens may be changed with or without a prior notice. Remote recording from outside Notes on timer recording • You can enter up to 32 programmes within a month in advance. (Each daily, weekly or series programme is counted as one programme.) • When the programme recorded in DR mode is converted, the audio content and subtitle language will be selected according to the following settings: - “Multi Audio” and “Audio Description” of “Preferred Multi Audio” (> 85) - “Subtitles” of “Preferred Subtitles” (> 85) - Audio for HG / HX / HE / HL / HM Recording (> 89) • Even if you switch the unit to standby mode during the timer recording, the recording is continued. • When you programme successive timer recordings to start, about last 1 minute of earlier programme will not be recorded. • Timer recording will not start while: - copying a title in high speed mode [with finalising or creating Top Menu ([+RW])] - copying a title in normal speed mode - converting a title in “File Conversion” (Only when “Now” is selected) - copying HD Video (AVCHD) from USB device or SD card - copying photos/music - formatting - finalising/creating Top Menu • When “Pure Sound mode” is activated, timer recording does not start during playback of BD-Video, DVD-Video or music CD. (> 86)

operations. To exit the timer recording list Press [EXIT ]. • “No Data” is displayed on a series recording item if there will be no episode of the series for the next 8 days. We recommend you delete the “No Data” item after you confirm the last episode of the series is recorded. To confirm and edit a timer programme To deactivate a timer programme Press the red button. • The timer icon “F” will change from red to grey. • Press the red button again to activate timer recording standby. (The timer icon “F” will change to red.) To delete a timer programme Press [DEL]. To edit a timer programme 1 Press [OK]. 2 Change the timer recording options. • Refer to “Timer recording options”. (> 33) 3 Press [OK]. To show programme information Press [STATUS ]. Channel Name Schedule Mode Space New Timer Programme TUE 08/01 TUE 08/01 10:00 - 11:50 11:00 - 11:45 11:30 - 1:00 8:00 - 10:45 TUE 08/01 TUE 01/01 DR HG DR DR OK OK OK RETURN Page Up Page Down Turn Timer Off Resolve overlap Total 3/32 Timer Recording 30:30 DR HDD TUE 01/01/2013 8:05 Delete Info e.g., Screen icons F Red: Timer recording standby is activated. Grey: Timer recording standby is deactivated. [ Currently recording programme A part or all of the programme will not be recorded since the programme is overlapping. • Programme overlapping can be resolved with repeat programme if available. Select the programme, then press the green button. (> 31, If “Overlapped Timer Recording” screen appears) • This function is not available for the timer programmes that were set manually. The HDD is full. Copy-protected programme It was not recorded. The recording of the programme was not completed because of some reason. Auto Renewal Recording is set (> 33). Guide Link (> 31) Split Programme (> 31) Series Timer Recording (> 31) OK Displayed if the recording can fit in the remaining space (Date) Daily or weekly timer programme is set. ! It may not be possible to record because: - there is not enough space left. - the number of possible titles has reached its maximum. (> 112) - programmes are deactivated, etc. Guide S/P

VQT4W68 36 Playing titles on the HDD Playing back video Resume play function If the following screen appears, select the point to start playback. § “For recorded titles” only 1 Press [DRIVE SELECT] to select “HDD”, then press [DIRECT NAVIGATOR]. • If the DIRECT NAVIGATOR screen of photo or music is displayed, press the red button, then select “VIDEO”. e.g., 1 Tab (> 37) 2 Programme type • [USB_HDD] When connecting registered USB HDD, “USB HDD” tab and registration number appears. Select “USB HDD” tab. e.g., 2 Select the title, then press [OK]. Playback starts. § Time Remaining 45h54m (DR) HDD Page Select Copy Grouped Titles VIDEO OPTION Start Time Prog.Type: Rec Time Play RETURN PHOTO / MUSIC Drama Sport AVCHD Movie Not Viewed DIRECT NAVIGATOR Channel Date Title Name Titles All Delete Page Up Page Down Movie 9:00 0h01m (DR) 003/003 04/10 04/10 29/10 29/10   Time Remaining 45h54m (DR) Registration number 1 USB HDD Grouped Titles VIDEO Drama Sport AVCHD Movie Not Viewed DIRECT NAVIGATOR All USB HDD Playback Last Stopped Beginning Where do you want to start playback from ? OK RETURN DIRECT NAVIGATOR (VIDEO) screen Screen icons [ Currently recording programme Protected title Title was not recorded due to recording protection t Title cannot be played (When data is damaged etc.) Grouped titles Title has not yet been played Title is recorded using a different encoding system from that of the unit. Change the “TV System” (> 81, 89). Radio programme 3D contents • This icon will not display even with 3D programmes when a broadcast programme is recorded. Recorded in 1080/50p contents Recorded in 1080/60p contents This icon is displayed with the following titles when “Child Lock” is set to “On”. (> 86) - Title with Guidance information - Title restricted by Child Lock List (> 85) • PIN is required to play. Title has been recorded in Series timer recording. Title has been recorded in Series timer recording and has not yet been played. &

VQT4W68 37 Titles will be categorised automatically. You can quickly find the recorded titles by selecting the tab. To select the tab Press [2, 1]. To change the displayed programme type tab 1 Select the programme type, then press the green button. 2 Select the item, then press [OK]. To change the programme type of title Refer to “Changing programme type of title”. (> 47) 1 Press the red button. 2 Select “PHOTO” or “MUSIC”, then press [OK]. Select the title, then press [STATUS ]. 1 On the Grouped Titles screen: Select the item marked with . Titles cannot be copied to the disc in high definition quality mode (DR, HG, HX, HE, HL, HM) any more. Titles can be copied to the disc in high definition quality mode (DR, HG, HX, HE, HL, HM) once. Recording did not complete as the timer recording has started. Title cannot be played from DLNA client not compatible with DTCP-IP (> 70) Tab Switching to the PHOTO or MUSIC screen 0 1 Showing Information Switching the appearance 1 Press [OPTION]. 2 Select “Grouped Titles” or “All Titles”, then press [OK]. Grouped Titles: Two or more titles recorded in the daily/weekly/series timer recording mode are bundled and displayed as one item. All Titles: Displays all titles. Playing back grouped titles 2 When playing all titles: Press [PLAY/a1.3 1]. When playing the individual title: Press [OK] and select the title, then press [OK].

VQT4W68 38 Playing titles on the HDD 1 Select the group, then press [OPTION]. 2 Select “Edit”, then press [OK]. 3 Select “Enter Title Name”, then press [OK]. 4 Refer to “Entering text”. (> 97) To edit the chapter in Chapter View Refer to “Editing chapters”. (> 49) Editing the grouped titles 1 Select the title or the group, then press the yellow button. • A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. • If you perform “Remove”, select the title in the group. 2 Press [OPTION]. 3 Select the item, then press [OK]. Create Group: Selected titles are bundled to form a group. Select “Create”, then press [OK]. Release Grouping: All the titles in the group are released. Select “Release”, then press [OK]. Remove: Selected titles are removed from the group. Select “Remove”, then press [OK]. Changing the group name Playback from Chapter View Regarding chapters You can divide a title into multiple chapters. Each section between the division points (Chapter Marks) becomes a chapter. • Chapter Creation This unit can create chapters automatically while recording broadcasting. (> 86) 1 Select the title, then press [OPTION]. 2 Select “Chapter View”, then press [OK]. e.g., [HDD] 3 Select the chapter, then press [OK]. Chapter Title Chapter Marks Press OK to start playing from the selected chapter. Selected chapter can be edited via OPTION. Press RETURN to go back to previous menu. Page 001/001 0:00.00 001 0:12.29 Play Select Edit Chapter Mark OK RETURN OPTION Delete

VQT4W68 39 Playing titles on the media To play back the playlist created on other equipment 1 Press [FUNCTION MENU]. 2 Select “Playlists” in “Others”, then press [OK]. 3 Select the playlist, then press [OK]. • [BD-V] You cannot play back while recording from external equipment. Also, playback stops when the timer recording starts from external equipment. • Some files may not be played back, depending on the video resolution and frame rate condition. Selecting screen for each operation is displayed when the media is inserted, and you can access the operation screen easily. e.g., [USB] • Display items differ depending on what is recorded in each media. If the menu screen is not displayed, display it by performing the following operation. 1 While stopped Press [OPTION]. 2 Select “Drive Select”, then press [OK]. 3 Select the media, then press [OK]. e.g., Screen icons: § “For data files” only 1 Insert the media. Depending on the type of the media, play starts from the specified position, or the screen appears. • AVCHD: If the menu screen is not displayed Press [PLAY/a1.3 1]. 2 When the DIRECT NAVIGATOR screen or menu screen etc., appears: Select the item or title, then press [OK]. • Repeat this step if necessary. Playback starts. § Menu screen Video list screen Folder Titles Move to the parent folder USB OK RETURN USB device is inserted. View Photos Play Video Play / Copy Music ( MP3 ) Copy Video ( MPEG2 ) Copy Video ( AVCHD ) Copy New Photos OK RETURN Page 0001 / 0003 Parent Folder Videos \ Video \ USB Folder 01 Folder 02 video01.mkv video02.mkv video03.mkv video04.mkv Page Up Page Down

VQT4W68 40 Playing titles on the media e.g., Switching to the PHOTO screen Press the red button. The screen switches to “PHOTO”. Showing Information Select the title, then press [STATUS ]. [SD] e.g., Showing Information 1 Select the title, then press [OPTION]. 2 Select “Information”, then press [OK]. About screen icons on the DIRECT NAVIGATOR Refer to “Screen icons”. (> 36) DIRECT NAVIGATOR screen Playback from Chapter View 1 Select the title, then press [OPTION]. 2 Select “Chapter View”, then press [OK]. 3 Select the chapter, then press [OK]. • Regarding chapters Refer to “Regarding chapters”. (> 38) Time Remaining 10h30m (DR) BD-RE Page 003/003 Copy Select All Titles VIDEO OPTION 04/10 04/10 29/10 29/10 Start Time 22:46 Rec Time 0h10m (HM) Play RETURN PHOTO DIRECT NAVIGATOR Channel Date Title Name All Delete Page Up Page Down DEL DIRECT NAVIGATOR (AVCHD) screen DIRECT NAVIGATOR Video ( AVCHD ) RETURN Date Day Time Title Name Rec time 0:30.41 Page 01/01 OPTION No. 01/01 5:00 02/01 9:30 03/01 10:00 03/01 11:30 01/01 SUN MON TUE TUE SUN 9:00 OK SD Card 001 002 003 004 005

VQT4W68 41 [BD-V] BD-Live allows you to enjoy more functions such as subtitles, exclusive images and online games by connecting this unit to the Internet. Preparation 1 Perform network connection and settings. (> 17, 21) 2 Insert a disc. For the playback method, refer to the instructions for the disc. If you no longer need BD-Live data recorded on the built-in HDD, you can delete data with the following operation. 1 Press [FUNCTION MENU]. 2 Select “BD-Video Data Management” in “Others”, then press [OK]. 3 Select “Delete BD-Video data”, then press [OK]. 4 Select “Yes”, then press [OK]. 5 Select “Start”, then press [OK]. 6 Press [OK]. • The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc. • You can restrict Internet access when BD-Live functions are used (> 81, 86, BD-Live). • When “Pure Sound mode” is set to “On”, this unit cannot use BD-Live functions. (> 86) Notes for BD-Live discs Delete BD-Video data

VQT4W68 42 Operation during play • Depending on the media and the type of file, some operations may not be possible. • Depending on the media, it may take time for the menu screen, pictures, sound, etc. to start. • Discs continue to rotate while menus are displayed. Press [STOP ∫] when you have finished playback to protect the unit’s motor, your TV screen, etc. Press [STATUS ] twice. e.g., Press [STOP ∫]. Press and hold [PLAY/a1.3 1]. • Press again to return to normal speed. • Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]): Quick View is not effective. • Quick View is not effective when playing back the DVD-RW disc. • Quick View may not work when recording in XP or FR mode. Press [SLOW/SEARCH 6] or [SLOW/SEARCH 5]. • Press [PLAY/a1.3 1] to restart play. • The speed increases up to 5 steps. ([+R] [+RW]: Up to 3 steps) • Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]): Audio is not heard during all levels search. Press [PAUSE ;]. • Press [PLAY/a1.3 1] to restart play. While paused, press [SLOW/SEARCH 6] or [SLOW/SEARCH 5]. • Press [PLAY/a1.3 1] to restart play. • The speed increases up to 5 steps. • Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]): Slow-motion is not effective. • [BD-V], AVCHD ([DVD-R] [SD]): Forward direction [SLOW/SEARCH 5] only. While paused, press [2] (2;) or [1] (;1). • Each press shows the next frame. • Press and hold to change in succession forward or backward. • Press [PLAY/a1.3 1] to restart play. • Xvid, MKV, MP4 and MPEG2 ([USB_HDD] [USB]): Frame-by-frame is not effective. • [BD-V], AVCHD ([DVD-R] [SD]): Forward direction [1] (;1) only. General operations Status messages Stop Resume play function Press [PLAY/a1.3 1] to restart from the stopped position. • The resume play function does not work depending on the media. • Discs: Only previous stopped position is memorized. The position may be cleared if the tray is opened or the unit is switched to standby mode. Quick View 8:05:50 01/01/2012 T1 0:05.14 DR 0:30.00 Remain HDD Search Pause Slow-motion Frame-by-frame

VQT4W68 43 Skip forward 1 minute: Press [MANUAL SKIP +60s]. Skip backward 10 seconds: Press [MANUAL SKIP -10s]. • Xvid and MKV: Manual Skip is not effective. [BD-V] [DVD-V] 1 Press [OPTION]. 2 Select “Playback Menu”, then press [OK]. 3 Select “Top Menu”, “Pop-up Menu” or “Menu”, then press [OK]. Press [SKIP :] or [SKIP 9]. • [HDD] [USB_HDD] (For recorded titles): It will not skip the title. But the title in the grouped titles will be skipped. (> 37) [HDD] [USB_HDD] (For recorded titles) [BD-RE] [BD-R] [RAM] During the playback or pause Press [CHAPTER]. [HDD] [USB_HDD] (For recorded titles) [BD-RE] [BD-R] [RAM] 1 While paused Press [SKIP :] or [SKIP 9] and skip to the location you want to delete. 2 Press [CHAPTER]. 3 Select “Yes”, then press [OK]. Select the desired audio with “Multi Audio” in the Disc menu (> 79). [HDD] [USB_HDD] (For recorded titles) [BD-RE] [BD-R]: 1 Press [STTL ]. 2 Select “On” or “Off”. • If you want to switch the subtitle language, select it in the Disc menu (> 79). [BD-V] [DVD-V], Xvid and MKV: Display with “Subtitles” in the Disc menu (> 79). [HDD] [USB_HDD] (For recorded titles) [BD-RE] [BD-R] 1 Press [AD]. 2 Select “Audio Description” and set to “Automatic”. 3 Select “Volume”, then adjust the volume with [2, 1]. • When “Dolby D / Dolby D + / Dolby TrueHD”, “MPEG” or “HE-AAC” is set to “Bitstream”, the Audio Description may not work. Set them to “PCM” (> 88, Digital Audio Output). • You can also set “Audio Description” active in the Setup menu. (> 85) You can switch the screen mode. Refer to “Switching the aspect ratio of the screen”. (> 97) Manual Skip To display menu Skipping the title or chapter To create Chapter Marks To delete the Chapter Mark Changing audio Switching subtitles Listening to the Audio Description Aspect

VQT4W68 44 Operation during play Preparation Connect 3D compatible TV to this unit. (> 14) • Perform the necessary preparations for the TV. Play back following the instructions displayed on the screen. Perform the following settings as necessary. 3D BD-Video Playback It is also possible to play back 3D discs in 2D (conventional video). (> 81, 85) 3D Type If 3D video cannot be played back in 3D, you may be able to play it in 3D by changing the setting. (> 81, 89) 3D AVCHD Output If 2D AVCHD video is recognised as 3D video and cannot be played back correctly, you may be able to play it by changing the setting. (> 81, 89) 3D Playback Message Hide the 3D viewing warning screen. (> 81, 89) Graphic Display Level Adjust the 3D position for the playback menu or message screen etc. (> 79) Change this setting when the screen is not correctly displayed for 3D compatible programmes. 1 Press [OPTION]. 2 Select “3D Settings”, then press [OK]. 3 Select the item, then press [OK]. • Depending on the contents, displayed items are different. • This unit only guarantees the playback of the Frame Sequential and the Side-by-Side (Half) programme types. • Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue. In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes. • Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV. • 3D video might not output the way it is set in “HDMI Video Format” (> 90) and “24p Output” (> 90). • It may display as Side-by-Side when playback of the 3D video is started. 3D video playback Preparatory 3D settings 3D settings during playback Signal Format Original Keep original picture format. Side by side 3D picture format comprising of left and right screens. 2D to 3D Converts 2D pictures to 3D effect while playing. 3D Picture Mode Normal Normal 3D effects. Soft Soft 3D effects. • This function cannot be enabled when “Signal Format” is set to “2D to 3D”. Manual Settings Distance Set the amount of depth perception. Screen Type Selects how the screen appears during 3D playback (flat or round). Frame Width Set the amount of feathering at the edge of screen. Frame Colour Set the colour of feathering at the edge of screen.

Editing video Once deleted, recorded content cannot be restored to its original state. Make certain before proceeding. • If the disc is protected, release the protection. (> 74, Disc Protection) Multiple deleting Select the title, then press the yellow button in step 1. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 1 Press [DEL] while playing. 2 Select “Delete”, then press [OK]. Available disc space after deleting § “For recorded titles” only 1 On the DIRECT NAVIGATOR screen: Select the title. 2 Press [DEL]. 3 Select “Delete”, then press [OK]. § Time Remaining 45h54m (DR) HDD Page Select Copy Grouped Titles VIDEO OPTION Start Time Prog.Type: Rec Time Play RETURN PHOTO / MUSIC Drama Sport AVCHD Movie Not Viewed DIRECT NAVIGATOR Channel Date Title Name Titles All Delete Page Up Page Down Movie 9:00 0h01m (DR) 04/10 04/10 29/10 29/10 Start Time Prog.Type: Rec Time Channel Date Title Name Movie 9:00 04/10 04/10 29/10 29/10 Deleting during play • [HDD] [USB_HDD] [BD-RE] [RAM] The space deleted becomes available for recording. • [BD-R] [DVD-R] [+R] Available space does not increase even after the contents are deleted. • [DVD-RW] [+RW] Available recording space increases only when the last recorded title is deleted.

Once deleted, divided or partially deleted, recorded content cannot be restored to its original state. Make certain before proceeding. § “For recorded titles” only • Depending on the media and the type of file, some operations may not be possible. • PIN is required to edit the titles with in some functions. (> 36) 1 On the DIRECT NAVIGATOR screen: Select the title. 2 Press [OPTION]. Multiple editing Select the title, then press the yellow button in step 1. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 1 Select “Delete Title”, then press [OK]. 2 Select “Delete”, then press [OK]. 1 Select “Enter Title Name” in “Edit”, then press [OK]. 2 Refer to “Entering text”. (> 97) [HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] [+R] [+RW] Protection setting prevents the title from accidental deletion. 3 Select the item, then press [OK]. e.g., • “Edit” has several functions. § Time Remaining 45h54m (DR) HDD Page Select Copy Grouped Titles VIDEO OPTION Start Time Prog.Type: Rec Time Play RETURN PHOTO / MUSIC Drama Sport AVCHD Movie Not Viewed DIRECT NAVIGATOR Channel Date Title Name Titles All Delete Page Up Page Down Movie 9:00 0h01m (DR) 04/10 04/10 29/10 29/10 Set up Protection Cancel Protection Partial Delete Divide Title Change Prog.Type Change Thumbnail File Conversion Enter Title Name Delete Title Playback Information Chapter View Create Group Release Grouping Edit All Titles Deleting Entering title name Setting protection 1 Select “Set up Protection” or “Cancel Protection” in “Edit”, then press [OK]. 2 Select “Yes”, then press [OK]. appears when setting the protection. Start Time Prog.Type: Rec T Drama Movie Not Viewed Channel Date Title Name All Movie 9:00 04/10 04/10 29/10 29/10

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] To confirm the division point After performing step 2. Select “Preview”, then press [OK]. • The unit plays 10 seconds before and after the division point. To change the division point After performing step 2. Restart play and select “Divide”, then press [OK] at the division point. • [HDD] [USB_HDD] Divided titles will become a group of titles. [HDD] [USB_HDD] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] To change the point After performing step 2. Restart play and select “Change”, then press [OK] at the point to change. • It is possible to change the image displayed on the Top Menu after finalising or creating Top Menu. [HDD] Programme type information in the title can be edited. 1 Select “Change Prog.Type” in “Edit”, then press [OK]. 2 Select the item to change a programme type, then press [OK]. 3 Select the programme type, then press [OK]. 4 Select “Set”, then press [OK]. Partial deleting 1 Select “Partial Delete” in “Edit”, then press [OK]. 2 Press [OK] at the start point and end point to delete. • You can find the desired point by using play, search, etc. (> 42) 3 Select “Continue”, then press [OK]. • Select “Next”, then press [OK] to delete other sections. Up to 20 sections can be set. (> go to step 2) 4 Select “Delete”, then press [OK]. • Chapter Mark is generated in the scene that was partially deleted. 5 Press [BACK/RETURN ]. Dividing title 1 Select “Divide Title” in “Edit”, then press [OK]. 2 Press [OK] at the point to divide the title. • You can find the desired point by using play, search, etc. (> 42) 3 Select “Continue”, then press [OK]. 4 Select “Divide”, then press [OK]. Changing thumbnail 1 Select “Change Thumbnail” in “Edit”, then press [OK]. 2 Press [OK] at the point to use as a thumbnail. • You can find the desired point by using play, search, etc. (> 42) 3 Select “Finish”, then press [OK]. Changing programme type of title Select the item for prog.type change. OK RETURN Sport Prog.Type 1 ( No Prog.Type ) Prog.Type 2 Set Cancel ( No Prog.Type ) Prog.Type 3 Change Prog.Type

[HDD] [USB_HDD] File Conversion is a function to convert the recording mode of the title in DR mode and AVCHD contents. The size of the converted title will be small regularly. It will take about the same time as the recorded duration. File Conversion 1 Select “File Conversion” in “Edit”, then press [OK]. e.g., 2 Set the conversion options, then press [OK]. Recording Mode (> 8): • [USB_HDD] You cannot select XP, SP, LP and EP mode. Subtitles: • Automatic Subtitles will be recorded if they are included in the title, and will not be recorded if they are not included. • Off Subtitle will not be recorded. File Conversion Convert the selected title by changing its recording mode. Please select recording mode and other options, then press OK. RETURN Subtitles Off Audio Description Off Recording Mode HL -- Longer Play Timing During standby OK Audio Description: • Automatic Audio Description will be recorded if they are included in the title, and will not be recorded if they are not included. • Off Audio Description will not be recorded. Timing: • Now Conversion begins immediately after step 4. • Timer recording will not be performed during conversion. • During standby Conversion will be performed after the unit is switched to standby mode. 3 Select the item, then press [OK]. Convert & Delete: The original title will be deleted to save HDD capacity after conversion. Convert Only: The original title remains after conversion. • When converting to HG, HX, HE, HL or HM mode, if the selected title is indicated with or , you cannot select “Convert Only”. (> 37) 4 “Now” conversion: Select “Start”, then press [OK]. “During standby” conversion: Press [OK]. Conversion will be performed after the unit is switched to standby mode. “COPY” or “CONV” on the unit’s display remains lighted during conversion. 0 1

Press and hold [BACK/RETURN ] for more than 3 seconds. To confirm whether the conversion is completed Press [DIRECT NAVIGATOR]. e.g., When “±± > ±± (Recording mode for conversion)” is displayed, the conversion has not finished. To cancel a “During standby” conversion After performing steps 1–3 (> 46) 1 Select “File Conversion” in “Edit”, then press [OK]. 2 Select “Yes”, then press [OK]. • To use “File Conversion”, the HDD needs enough storage capacity. • The size of converted title might increase depending on the title. • File Conversion is stopped when this unit is turned on during performing “During standby” conversion. Conversion will start from the beginning again once the unit is switched to standby mode. • When converted, the audio content and subtitle language will be selected according to the following settings: - “Multi Audio” of “Preferred Multi Audio” (> 85) - “Subtitles” of “Preferred Subtitles” (> 85) - Audio for HG / HX / HE / HL / HM Recording (> 89) • When converted, 3D information may not be retained. • In titles with the Auto Renewal Recording function (> 33) set, a programme may be unintentionally converted while in “During standby”. [HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] 1 Select “Chapter View”, then press [OK]. 2 Perform the editing operations. Playback from Chapter View Refer to “Playback from Chapter View”. (> 38) • The maximum number of chapters: (Depends on the state of recording.) [HDD] [USB_HDD]: Approx. 1000 per title [BD-RE] [BD-R] [RAM]: Approx. 1000 per disc • [HDD] [USB_HDD] When the title has the maximum number of chapters, you cannot perform the Resume play function (> 36) or the “Changing thumbnail” (> 47) with the title. Start Time Prog.Type: Rec Time Channel Date Title Name Titles Movie 9:00 1h00m (DR HL) / / / / Editing chapters Edit Chapter Mark: Select the point where you want to start a new chapter while viewing the title. 1 Press the green button. 2 Press [OK] at the point you want to divide. • Repeat this step. 3 Press [BACK/RETURN ] to go to Chapter View screen. To delete the chapter: 1 Select the chapter, then press [DEL]. Multiple editing Select the chapter, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 2 Select “Delete”, then press [OK]. To combine chapters (Delete chapter mark): 1 Select the chapter, then press [OPTION]. 2 Select “Combine Chapters”, then press [OK]. 3 Select “Combine”, then press [OK]. The selected chapter is combined to the next chapter.

Refer to “Registering the USB HDD”. (> 77) To copy HD Video (AVCHD) to the DVD-R in High Definition Refer to “Copying HD Video (AVCHD) to the DVD-R in High Definition”. (> 57) Release the disc protection Refer to “Disc Protection”. (> 74) • If you wish to choose the audio language, select the language from “Multi Audio” of “Preferred Multi Audio” before copying (> 85). • Simultaneous operation is not possible while copying with finalising or creating Top Menu. However, the titles on the HDD can be played back while high speed copying without finalising or creating Top Menu. §1 “For recorded titles” only §2 The title in the source media will be deleted. §3 The recording mode cannot be changed. 1 Insert or connect the media. 2 Press [DRIVE SELECT] to select “HDD”, then press [DIRECT NAVIGATOR]. • If the DIRECT NAVIGATOR screen of photo or music is displayed, press the red button, then select “VIDEO”. 3 Select the title, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 4 Press the blue button. 5 Set the copy direction, then press [OK]. 6 Select “Yes”, then press [OK]. • If you select “No”, you can change the selection. (> 51) §1, 2, 3 §1 Start Time Prog.Type: Rec Time Channel Date Title Name Movie 9:00 04/10 04/10 29/10 29/10 7 Set other settings, then press [OK]. e.g., (> 51, Setting the copying options) 8 Select “Yes”, then press [OK]. Standby status can be changed if required. Please press OK to start copying. OK RETURN Automatic Standby after Copy Off

e.g., [HDD] > [BD-RE] 3 Press the blue button. 4 Go to step 6. (> 50) Screen icons About screen icons on the DIRECT NAVIGATOR Refer to “Screen icons”. (> 36) 1 Select the item in step 7 (> 50). 2 Press [2, 1] to change the settings. • You can perform “Finalise” or “Create Top Menu” later. (> 75) To change the selection 2 To change the selected titles: Select the title, then press the yellow button. Repeat this step to select titles. To change the picture quality: [HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] 1 Select the title, then press [OPTION]. 2 Select “Conversion Select”, then press [OK]. 3 Select the picture quality, then press [OK]. Repeat steps if necessary. Titles that will be copied to the disc in normal speed Titles that cannot be copied Titles that will be moved to the disc • The title in the source media will be deleted. HDD Page 003/003 Select Copy Grouped Titles BD-RE Remain Start Time Prog.Type: Rec Time OK RETURN Copy Channel Date Title Name Titles Page Up Page Down Movie 9:00 0h01m (DR) 1 2 90% OPTION Drama Sport AVCHD Movie Not Viewed All 04/10 04/10 29/10 29/10 Remaining space The order of copying Setting the copying options • Automatic Standby after Copy On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy. • Subtitles Automatic: Subtitles will be recorded if they are included in the title. • If you wish to choose the subtitle, select the language from “Subtitles” of “Preferred Subtitles” before copying (> 85). • Audio Description Automatic: Audio Description will be recorded if they are included in the title, and will not be recorded if they are not included. • Finalise On: [DVD-R] [DVD-RW] [+R] The discs become play-only and you can also play them on other DVD equipment. • Create Top Menu On: [+RW] You can play the disc on other DVD equipment.

1 Insert a disc. The menu screen appears. (> 39) 2 Select “Play Video”, then press [OK]. 3 Select the title, then press the yellow button. A check mark is displayed. Repeat this step. 4 Press the blue button. • To change the detailed settings for copy, refer to “Copying titles with copying list”. (> right) 5 Select “Start Copying”, then press [OK]. 6 Select “Yes”, then press [OK]. §1 “For recorded titles” only §2 The title in the source media will be deleted. §3 The recording mode cannot be changed. Copying from media other than HDD with DIRECT NAVIGATOR Start Time Rec Time Channel Date Title Name 9:00 0h30m 04/10 04/10 29/10 29/10 Copy 1 2 3 Cancel All Copy Direction Copy Mode Create List Start Copying HDD High Speed RETURN OK 2 Press OK to start copying. BD / DVD Copying titles with copying list [HDD] ,. [USB_HDD]§1, 2, 3 [HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] [USB_HDD]§1, 3 > [BD-RE] [BD-R] [BD-RE] [BD-R] [RAM] [+RW] > [HDD] 1 [HDD] ,. [USB_HDD]: 1 Press [FUNCTION MENU]. 2 Select “Copy Video” in “Copy”, then press [OK]. Except “[HDD] ,. [USB_HDD]”: 1 Insert a disc. The menu screen appears. (> 39) 2 Select “Copy”, then press [OK]. 2 Set the copy direction. 1 Select “Copy Direction”, then press [1] (right). 2 Set “Source” and “Destination”. 3 Press [2]. 3 Set the recording mode (> 8). 1 Select “Copy Mode”, then press [1] (right). 2 Set “Recording Mode”. 3 Press [2]. Copy HDD BD / DVD 1 2 3 Source Destination Cancel All Copy Direction Copy Mode Create List Start Copying HDD BD / DVD High Speed Select the copy direction. RETURN 0 Information of the copy destination - BD-RE - Copy restricted titles can be copied on to disc

6 Select “Start Copying”, then press [OK]. 7 Select “Yes”, then press [OK]. To cancel all registered copying settings and lists After performing step 1 1 Select “Cancel All”, then press [OK]. 2 Select “Yes”, then press [OK]. • If you wish to choose the audio language, select the language from “Multi Audio” of “Preferred Multi Audio” before copying (> 85). • Titles in the grouped titles and other titles cannot be registered simultaneously. 4 Register titles for copy. 1 Select “Create List”, then press [1] (right). 2 Select “New item”, then press [OK]. 3 Select the title, then press the yellow button. Repeat this step to select titles. e.g., [HDD] • To change the appearance of the list or show information of the title • The titles will be copied in the order of the copying list. If you want to specify the order, edit the copying list after the titles are selected. (> 54, Editing the copying list) 4 Press [OK]. 5 Press [2]. Data size of each registered title Size: Data size recorded to the copy destination RETURN Time Rec time Size 1360 MB 0:30 (DR) 9:00 Page Select OPTION Page Up Page Down HDD OK 001/003 Create List Grouped Titles 01/01 15:00 1 02/01 9:30 1 03/01 10:00 1 03/01 18:30 1 04/01 2:00 1 05/01 11:00 1 05/01 15:00 1 06/01 3:45 1 06/01 9:00 1 01/01 9:00 1 Date Channel Time Title Name Titles Page 01/01 Size: Destination Capacity: No. Size New item (Total=0) Title ( 0% ) 0 MB 3200 MB 5 Make other settings. 1 Select “Other Settings”, then press [1] (right). e.g., • This screen does not appear depending on the copying mode. (> go to step 6) 2 Select the copying option, then press [OK]. (> 51, Setting the copying options) 3 Press [2]. Copy 1 2 3 Cancel All Copy Direction Copy Mode Create List 4 Other Settings Start Copying HDD BD / DVD HG Press OK to change the setting. 1 Subtitles Finalise Off Off Audio Description Off RETURN OK

2 Press [OPTION]. 3 Select the item, then press [OK]. • When copying at normal speed, the total data size will change according to the recording mode. • The total data size shown may be larger than the sum of the data sizes for each registered item. About other screen icons Refer to “Screen icons”. (> 36) Editing the copying list Delete All: All titles that you registered to copy are deleted. Select “Yes”, then press [OK]. Add: Add new items to the copying list. 1 Select the titles with the yellow button. 2 Press [OK]. Delete: Selected titles are deleted. • Select the title, then press the yellow button before step 2. Repeat this step to select titles. Select “Yes”, then press [OK]. Move: Change the order of items on the copying list. • Select the title to move before step 2. Select the destination, then press [OK]. Copy 1 2 3 Cancel All Copy Direction Copy Mode Create List 4 Other Settings Start Copying HDD BD / DVD HG Create copy list. 2 Page 01/01 Size: Destination Capacity: No. Size New item (Total=2) Title ( 50% ) 1:00 2:00 OPTION 01 0:30 DR (25%) 0:30 DR (25%) 02 RETURN OK Screen icons Titles that cannot be copied in high speed mode Titles that cannot be copied Titles that will be moved to the disc • The title in the source media will be deleted. Title contains photos • Photos cannot be copied. (NTSC) (PAL) Title recorded using a different encoding system from that of the unit. • Titles displaying these marks cannot be selected.

title to disc in high speed while maintaining the original record mode and recording length. If any conversion is required during the copy process, the copying will be done at normal speed. • The following recording mode and media combinations support high speed copying. • Converting the recording mode will result in a normal speed copy. • High speed copy is possible only when there is enough recording capacity on the destination media. • It is impossible to copy at high speed in the following cases: - [HDD] > [BD-RE] [BD-R] : • Copying radio programmes - [HDD] > [DVD-R] [DVD-RW] [+R] [+RW] : • Copy including a title that was recorded to HDD with “Recording Format for DVD” set to “VR format” (> 87) • Titles that contain many deleted segments • Titles (SD Video) that have been copied to the HDD from an SD card or a Panasonic video camera, etc. (> 69) - [HDD] > [+R] [+RW] : • Titles recorded in “EP” mode and “FR (recordings 5 hours or longer)” mode • Titles recorded in 16:9 aspect - [HDD] > [DVD-R] [DVD-RW] : • Titles recorded via AV input in 16:9 aspect using “EP” mode or “FR (recordings 5 hours or longer)” mode • [DVD-R] [DVD-RW] [+R] [+RW] You cannot copy to the disc in the following cases. - When there is not enough free space on the HDD. - When the number of titles recorded to the HDD and the number of titles to be copied to the disc is greater than 999 in total. • [DVD-R] [DVD-RW] [+R] [+RW] If copy is cancelled during the step while temporarily copying to the HDD, then nothing will be copied. • [BD-R] [DVD-R] [DVD-RW] [+R] [+RW] Even if the title was not copied to the disc, the amount of remaining writable disc space becomes less. • When copying title recorded in 1080/50p or 1080/60p, it cannot copy in progressive. You cannot copy the following titles. - Protected titles - HD Video (AVCHD) - SD Video (MPEG2) When copying to DVD-RAM using “8 hours” mode, play may not be possible on DVD players that are compatible with DVD-RAM. Use “6 hours” mode if playback may be on other equipment. (> 87, Recording time in EP mode) • It may not display correctly in 3D when a copied 3D programme is played back. In such a case, change the “Signal Format” during the playback of the title. (> 44) • 3D information may not be copied. • If you want to copy 3D AVCHD video to the disc in 3D, use BD-R or BD-RE and copying speed must be high speed. Notes for copying Notes for high speed copy Original title’s recording mode Media DR HG HX HE HL HM XP SP LP EP FR § DVD-RAM only § Notes for normal speed copy Notes for copying to the USB HDD Notes for copying to the DVD-RAM Notes for copying 3D programmes

” icon can be copied to the disc in high definition quality mode (Original Picture Quality, HG, HX, HE, HL or HM) once. After completing copy, the titles on the HDD cannot be copied to the disc anymore in high definition quality mode and the icon is changed to “ ”. The titles copied to the discs cannot be copied again. [DVD-V] > [HDD] While playing a disc, the content being played is copied to the HDD according to the set time. 1 Press [FUNCTION MENU]. 2 Select “Copy Video” in “Copy”, then press [OK]. 5 Select “Start Copying”, then press [OK]. To stop copying Press [STOP ∫]. • You can also press and hold [BACK/RETURN ] for 3 seconds. • If stopped partway, copying will be up to that point. • Operations and on-screen displays during copy are also recorded. • Almost all DVD-Video on sale have been treated to prevent illegal copying, and cannot be copied. • If play does not begin automatically press [PLAY/a1.3 1] to start. About maintaining the chapter mark • The position of the chapter might shift slightly. • Maximum number of chapters on the disc is limited. - [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] : Approx. 1000 - [+R] [+RW] : Approx. 254 (Depends on the state of recording.) About copy-restricted programmes Copying a finalised disc 3 Set “Copy Mode”. 1 Select “Copy Mode”, then press [1] (right). 2 Press [OK], then select the recording mode (XP/SP/LP/EP). 3 Press [2]. 1 0 4 Set “Copy Time”. 1 Select “Copy Time”, then press [1] (right). 2 Select “Time Setting”, then press [OK]. 3 Select “On” or “Off”. On: Set the copying time. • Set a few minutes longer than the source title, in order to include the operation time before play begins. Off: Copying all the content on the disc. 4 Press [2]. 6 Select “Yes”, then press [OK]. • When the Top Menu is displayed: Select the title you want to start copying, then press [OK]. After the last title on the disc has finished playing the Top Menu is recorded until the set time is reached. 01/02 01 Mouse 03 02 04 06 Cattle Tiger Rabbit

To stop copying Press and hold [BACK/RETURN ] for 3 seconds. • You can record to or play HDD while high speed copying. Press [OK] to exit the screen display. • Press [STATUS ] to confirm the current progress. You can copy HD Video (AVCHD) recorded on HDD to a DVD-R in High Definition quality. [HDD] > [DVD-R] 1 Insert an unformatted DVD-R or DVD-R DL. The menu screen appears. (> 39) 2 Select “Copy Video (AVCHD) to Disc”, then press [OK]. 3 Go to step 4 on page 53, “Copying titles with copying list”. To copy HD Video (AVCHD) from other equipment Refer to “Copying HD Video (AVCHD)”. (> 68) • This function can only be used for unformatted disc. • When a disc is named, formatting will be automatically performed. Therefore, do not name a disc before this operation. (> 74, Disc Name) • Discs will be automatically finalised after copy. • You can choose the thumbnail image of the Top Menu before using this function. (> 47, Changing thumbnail) • The following HD Videos (AVCHD) cannot be copied to the disc in high definition. - Exceeding 18 Mbps - 1080/50p or 1080/60p - Without the AVCHD information (video recorded with certain non-Panasonic equipment, video copied to the HDD after copying it to BD-R or BD-RE once, etc.) • 3D video will become 2D. Copying Title Playing [HDD] > [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] 1 Play back the title to copy. • Multiple audio and subtitle displayed during playback will be copied. - Select the multiple audio with “Multi Audio” in the Disc menu (> 79) - Select the subtitles with “Subtitle Language” in the Disc menu. (> 79) 4 Select “Start”, then press [OK]. Copying will start from the beginning of the title regardless of the playing position. • Speed and recording mode when copying The high speed copy is performed if available. Refer to “Notes for copying”. (> 55) • When copying the titles in DR, HG, HX, HE, HL or HM modes and the copy destination does not have enough space, one from HG, HX, HE, HL or HM modes will be selected to match the available space. • [RAM] [DVD-R] [DVD-RW] [+R] [+RW] When copying the titles in DR, HG, HX, HE, HL or HM modes, copy will be performed at normal speed in FR mode. • When copying the titles in XP, SP, LP, EP or FR modes and the copy destination does not have enough space, copy will be performed at normal speed in FR mode. Copying HD Video (AVCHD) to the DVD-R in High Definition

Press [PAUSE ;]. • When there are many files and/or folders, some files may not be displayed or not be playable. (> 112) Event It is displayed for each recording date. • It is displayed for each folder for media other than HDD. §1 “For data files” only (JPEG, MPO) §2 [BD-RE] only §3 [RAM] [DVD-R] only • In order to play back 3D photo (MPO), this unit should be connected to a Full HD 3D compatible TV. 1 [HDD] 1 Press [FUNCTION MENU]. 2 Select “Photo” in “Playback Contents”, then press [OK]. [USB_HDD] [BD-RE] [RAM] [DVD-R] [CD] [SD] [USB] 1 Insert or connect the media. The menu screen appears. (> 39) 2 Select “View Photos”, then press [OK]. 2 Select the event, then press [OK]. e.g., [HDD] • To select the tab Press [2, 1]. • Start Slideshow Refer to “Slideshow settings”. (> 59) • Switching to the Calendar screen ([HDD] “All” tab only) Press [PAUSE ;]. 3 Select the photo, then press [OK]. • Press [2, 1] to display the previous or next photo. §2 §3 §1 HDD Page Select Slideshow Calendar PHOTO OPTION 03/01/2012 29/10/2012 25/02/2013 15/03/2013 0002/0002 Copy OK RETURN VIDEO / MUSIC 8 12 18 4 DIRECT NAVIGATOR Date & Event Name Photos All Album 1 Album 2 Album 3 Album 4 3D Page Up Page Down CH Tab DIRECT NAVIGATOR (PHOTO) screen Screen icons (Tab) Album Placing photos in albums of your choice makes it easier to find them. (> 60) 3D (Tab) 3D photos (MPO) are automatically sorted. Select from this tab to play back in 3D. (It will play back in 2D when selected from other tabs.) Photo protected New photo which is stored and not viewed HDD Page Select Slideshow Calendar PHOTO OPTION 03/01/2012 29/10/2012 25/02/2013 15/03/2013 0002/0002 Copy OK RETURN VIDEO / MUSIC 8 12 18 4 DIRECT NAVIGATOR Date & Event Name Photos All Album 1 Album 2 Album 3 Album 4 3D Page Up Page Down CH e.g., [HDD] Album (> below)

Press the red button. 2 Select “VIDEO” or “MUSIC”, then press [OK]. [BD-RE] [RAM]: On the DIRECT NAVIGATOR screen: Press the red button. 1 While displaying a photo: Press [OPTION]. 2 Select the item, then press [OK]. 1 On the DIRECT NAVIGATOR screen: Press the green button. 2 Select the item, then press [OK]. To pause the Slideshow Press [PAUSE ;]. • Press [PAUSE ;] again to restart. To stop the Slideshow Press [BACK/RETURN ]. Switching to the VIDEO or MUSIC screens Photo play option Aspect You can switch the screen mode. (> 97) Graphic Display Level You can change the 3D position of the screen display, etc., during the 3D photo playback. Photo Menu • Start Slideshow You can start a slideshow. • Rotate RIGHT/Rotate LEFT e.g., • The information of the rotated photos will not be stored depending on the media. • This function is not available during the 3D photo playback. • Information Information (shooting date etc.) is shown. Slideshow settings Start Slideshow You can start a slideshow. Interval You can set up the time until the next photo is to display. Transition Effect§ Effect for the next photo to display can be set. Repeat Play You can set up to play back repeatedly. Music Selection§ You can select background music on (either from HDD or USB) or off. Background Music§ You can select background music from HDD (My Favourites or Playlists) or USB (Folder). Random BGM§ You can play back the BGM (Background Music) in random order. § This function is not available during the 3D photo playback. Slideshow OK RETURN Start Slideshow Interval Transition Effect Repeat Play Normal Fade On Music Selection No background music Background Music No List Random BGM Off

§2 [RAM] only 2 Press [OPTION]. • Selectable items will change depending on the media and the type of file. 3 Select the item, then press [OK]. 1 On the DIRECT NAVIGATOR screen: To edit the event: Select the event. To edit the photo: 1 Select the event, then press [OK]. 2 Select the photo to edit. • To select multiple events or photos Press the yellow button when selecting the event or photo. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. §1 §2 e.g., [HDD] HDD Page Select Slideshow Calendar PHOTO OPTION 03/01/2012 29/10/2012 25/02/2013 15/03/2013 0002/0002 Copy OK RETURN VIDEO / MUSIC 8 12 18 4 DIRECT NAVIGATOR Date & Event Name Photos All Album 1 Album 2 Album 3 Album 4 3D Page Up Page Down CH Edit • Add to Album [HDD] 1 Select the destination album, then press [OK]. 2 Press [OK]. • Combine Events [HDD] Select “Yes”, then press [OK]. • Remove from Album [HDD] Select “Yes”, then press [OK]. • Enter Album Name [HDD] Refer to “Entering text”. (> 97) • Enter Event Name Refer to “Entering text”. (> 97) Delete Photos Select “Yes”, then press [OK]. Set up Protection [BD-RE] [RAM] [SD] Select “Yes”, then press [OK]. appears when the protection is set. • Even if the protection is set, the photo may be deleted by another unit. Cancel Protection [BD-RE] [RAM] [SD] Select “Yes”, then press [OK].

§2 [BD-RE] only §3 [RAM] [DVD-R] only 2 Select the copying destination, then press [OK]. To stop copying Press and hold [BACK/RETURN ] for 3 seconds. • The name of the copied photos will be changed. • If the number of files/folders to be copied exceeds the maximum (> 112), copying will stop partway through. Newly added photos will automatically be copied to the HDD. 4 Once the copy is completed, select “Yes” or “No”, then press [OK]. To stop copying Press and hold [BACK/RETURN ] for 3 seconds. • Photos without shooting date will be categorised using the creation date. • If the space on the destination drive runs out or the number of files/folders to be copied exceeds the maximum (> 112), copying will stop partway through. • The name of the copied photos will be changed. Selecting and copying the photos [HDD] > [BD-RE] [RAM] [SD] [BD-RE] [RAM] [DVD-R] [CD] > [HDD] [SD] [USB_HDD] [SD] [USB] > [HDD] [BD-RE] [RAM] 1 On the DIRECT NAVIGATOR screen: To copy the event: Select the event, then press the blue button. To copy the photo: 1 Select the event, then press [OK]. 2 Select the photos to copy, then press the blue button. • To select multiple events or photos Press the yellow button when selecting the event or photo. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. 3 When copying to HDD: Select “Yes” or “No”, then press [OK]. • If you select “Yes”: Select the album, then press [OK]. e.g., [SD] • You can categorise and manage the events and photos on the HDD by copying to the album. (> 58) §2 §3 §1 Copy Photos HDD SD card HDD Album Selection Please select the destination album. Album 1 Album 2 Album 3 Album 4 OK RETURN 4 Select “Yes”, then press [OK]. Copying starts. Copying automatically [USB_HDD] [BD-RE] [RAM] [DVD-R] [CD] [SD] [USB] > [HDD] 1 Insert the media. The menu screen appears. (> 39) 2 Select “Copy New Photos”, then press [OK]. e.g., [SD] 3 Select “Yes”, then press [OK]. Copying starts. Yes No Start copying ? Timer recording or Ext Link recording cannot start during copying. Copy New Photos OK RETURN HDD SD card

Select the item, then press [OK]. • The track/artist name will be displayed if the information is contained in ID3 tag of the MP3 file. • If there is a large amount of photo data etc. within a MP3 file, play may not be possible. [USB_HDD] [DVD-R] [CD] [USB] > [HDD] After performing steps 1–2 (> left) 1 Press the blue button. 2 Select “Copy”, then press [OK]. To stop copying Press and hold [BACK/RETURN ] for 3 seconds. • While copying, no other operations can be performed. Timer recordings will not proceed. • All tracks in the folder will be copied. • Tracks recorded to HDD in one operation will be regarded as one album. §1 “For data files” only (MP3) §2 [DVD-R] only Music CD: Insert the disc. Playback will automatically start. MP3: 1 Insert or connect the media. The menu screen appears. (> 39) • [DVD-R] [CD] Playback will automatically start if only MP3 is recorded. 2 Select “Play / Copy Music ( MP3 )”, then press [OK]. Playback will start. • Using the tree screen to find a folder 1 Press [OPTION]. 2 Select “Select Folder”, then press [OK]. 3 Select the folder, then press [OK]. §1 §2 DIRECT NAVIGATOR No. Track Name Track List 0001 0002 0003 0004 0005 CD ( MP3 ) e.g., [CD] (MP3) Copying music (MP3) to HDD

2 Select “Music” in “Playback Contents”, then press [OK]. 3 Select the item, then press [OK]. 1 On the DIRECT NAVIGATOR (Music Menu) screen: Press the red button. 2 Select “VIDEO” or “PHOTO”, then press [OK]. On the track list screen: 1 Select the track, then press [OPTION]. 2 Select “Information”, then press [OK]. Playing music recorded on HDD Artists 1 Press [2, 1] to select the initial of the artist. 2 Select the name of the artist, then press [OK]. 3 Select the album, then press [OK]. 4 Select the track, then press [OK]. Albums 1 Press [2, 1] to select the initial of the album. 2 Select the album, then press [OK]. 3 Select the track, then press [OK]. My Favourites Tracks registered in “My Favourites”. Select the track, then press [OK]. • Registering a track to the “My Favourites”. (Up to 99 tracks) While the track list screen is displayed: Select the track, then press the green button. Playlists 1 Select the playlist, then press [OK]. 2 Select the track, then press [OK]. DIRECT NAVIGATOR Music Menu MUSIC OK RETURN Please select to access music. Artists Frequently Played Albums Total Tracks 53 HDD Random Play My Favourites OPTION Playlists VIDEO / PHOTO Frequently Played Tracks most often played recently (up to 30 tracks). Select the track, then press [OK]. Random Play Random playback of all tracks. Playback starts. Switching to the VIDEO or PHOTO screens Showing Track Information

Press [STOP ∫]. Press [PAUSE ;]. • Press [PLAY/a1.3 1] to restart play. Press [SLOW/SEARCH 6] or [SLOW/SEARCH 5]. • Press [PLAY/a1.3 1] to restart play. Press [SKIP :] or [SKIP 9]. Refer to “Repeat Play” or “Random” in Play menu (> 79). Refer to “Sound Effects” in Sound menu (> 80). Photos stored on the “Album” of the HDD can be played back as slideshow during playback of the music. While playing the music Press the red button. To end the slideshow Press [BACK/RETURN ]. How to create the photo album Refer to “Add to Album”. (> 60) To play music continuously even if the Power off link works Refer to “Playing music continuously even after turning off power to the TV”. (> 78) Operations during music play Stop Pause Search Skip Repeat Play/Random Sound Effects Displaying photos (Slideshow) • To change the photos to display 1 While slideshow playing Press [OPTION]. 2 Select “Select Photo Album”, then press [OK]. 3 Select the album, then press [OK]. e.g., Please select the album to start slideshow. RETURN OK While playing music a photo slideshow can be displayed. Select Photo Album Sample Photos Album 1 Album 2 Album 3 Album 4

Select “Yes”, then press [OK]. 2 Select “Delete”, then press [OK]. Select “Delete”, then press [OK]. Select “Delete”, then press [OK]. Refer to “Entering text” on page 97. Select “Remove”, then press [OK]. • Tracks themselves are not deleted from the HDD. Select “Clear”, then press [OK]. • Tracks themselves are not deleted from the HDD. Select “Remove”, then press [OK]. • Tracks themselves are not deleted from the HDD. You can register your favourite albums and tracks into 10 preset playlists. Select the playlist, then press [OK]. • New playlist cannot be added. • Up to 999 tracks can be registered to each playlist. 1 On the DIRECT NAVIGATOR screen: Press [OPTION]. e.g., 2 Select the item, then press [OK]. e.g., while selecting an Album • Editing operations will change depending on the screen. DIRECT NAVIGATOR Music Menu MUSIC OK RETURN Please select to access music. Artists Frequently Played Albums Total Tracks 53 HDD Random Play My Favourites OPTION Playlists VIDEO / PHOTO Add to Playlist Edit Album Name Playback Settings Delete Album Delete All Tracks Delete Album Delete Edit Album Name/Edit Track Name/Edit Artist Name/Edit Playlist Name Remove All Tracks Clear My Favourites/Clear Frequently Played Remove Add to Playlist

VQT4W68 66 Recording from external equipment With Other Equipment Preparation Connect the Set Top Box or video equipment (> 15) [HDD] Recording mode: XP, SP, LP, EP 1 Press [INPUT SELECT] and select “AV”, then press [OK]. 2 Press [REC MODE] to select the recording mode. 3 Select the channel on the Set Top Box or start play on the video equipment. 5 Set the time to record. (> 28) To stop recording Press [STOP ∫]. • Following contents or media cannot be played back while recording from external equipment. - BD-Video - Xvid, MKV and AVCHD file - photo - SD card - USB HDD (For data files) and USB memory [HDD] [BD-RE] [BD-R] [RAM] [DVD-R]§ [DVD-RW] [+R]§ [+RW] § This function is not available with DVD-R DL and +R DL. Recording mode: FR 1 Press [DRIVE SELECT] to select the recording drive. 2 Press [INPUT SELECT] and select “AV”, then press [OK]. 3 Press [FUNCTION MENU]. 4 Select “Flexible Recording via AV input” in “Others”, then press [OK]. 5 Set the recording time. 6 Start play on the other equipment. 7 Select “Start”, then press [OK]. To stop recording partway Press [STOP ∫]. To show the remaining time Press [STATUS ]. • Simultaneous operation is not possible while Flexible Recording via AV input to the disc is working. Manual Recording 4 Press [REC ¥]. Recording starts. REC1/OTR Recording Time Automatic Stop (Guide Link) Continuous recording 30 min Input AV Flexible Recording via AV input RETURN OK Flexible Recording via AV input Please set recording time. Record in FR mode. Maximum recording time Set recording time Hour 8 Min. 00 Start Cancel 8 hour 00 min.

VQT4W68 67 [HDD] Recording mode: XP, SP, LP, EP • Connect the equipment with AV input terminal using a 21-pin Scart cable (> 15). • Set “AV Input” and “Ext Link” (> 90). • Make timer programming on the external equipment. 1 Press [FUNCTION MENU]. To cancel the External link 1 Turn on this unit. 2 Press [FUNCTION MENU]. 3 Select “Ext Link Standby” in “Others”, then press [OK] to stop recording or to cancel linked timer recording standby. (“EXT-L” disappears.) • It will be recorded in standard definition quality even if the programme is in high definition. • This function does not work when “TV System” is set to “NTSC” (> 89). • This function does not work while recording two programmes simultaneously with timer recording. • The beginnings of recordings may not be recorded correctly in some cases. • Programmes are recorded as one title on this unit when the end time of the earlier timer recording and the start time of the later timer recording are close to each other. To divide the titles, refer to “Dividing title” (> 47). Linked timer recording (Set Top Box, etc.)–EXT LINK 2 Select “Ext Link Standby” in “Others”, then press [OK]. • “EXT-L” lights on the unit’s display.

VQT4W68 68 Copying the HD Video or the SD Video § “For data files” only e.g., Connecting to the Panasonic video camera • If you connect a Panasonic product with a USB connection cable, setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment. • The original file must be in the AVCHD standard. 2 Select “Copy Video ( AVCHD )”, then press [OK]. 3 When copying from an SD card or video equipment: Select “Copy to HDD” or “Copy to Blu-ray Disc”, then press [OK]. 5 Press [OK]. To stop copying Press and hold [BACK/RETURN ] for 3 seconds. To copy to the DVD-R in High Definition Refer to “Copying HD Video (AVCHD) to the DVD-R in High Definition”. (> 57) • An AVCHD title with 100 or more scenes will be divided into titles every 99th scene and copied. USB connection cable (optional) Copying HD Video (AVCHD) [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] > [HDD] [USB_HDD] [SD] [USB], video camera, etc. > [HDD] [BD-RE] [BD-R] 1 Connect the video camera or insert the media. • Make the video camera ready for data transfer. The menu screen appears. (> 39) § 4 Select the title, then press the yellow button. A check mark is displayed. Repeat this step. • Press the yellow button again to cancel. (All the recordings on the same date become a title.) 6 Select “Start”, then press [OK]. It will automatically format the unformatted disc, such as a new disc. • It may take time for the copying to start. Screen icons (NTSC) (PAL) Title recorded using a different encoding system from that of the unit. • Titles displaying these marks cannot be selected. Time Rec time Size 200 MB 0:30 9:00 HDD Copy Video ( AVCHD ) Destination Capacity Size SD 002 003 004 AVCHD AVCHD AVCHD AVCHD 001 No. Channel e.g., [SD]

VQT4W68 69 • The original file must be in the SD-Video standard. 3 Select “Start Copying”, then press [OK]. 4 Select “Yes”, then press [OK] to start copying. To stop copying Press and hold [BACK/RETURN ] for 3 seconds. Copying SD Video (MPEG2) [USB_HDD] [SD] [USB], video camera, etc. > [HDD] [RAM] 1 Connect the video camera or insert the media. • Make the video camera ready for data transfer. The menu screen appears. (> 39) 2 Select “Copy Video ( MPEG2 )”, then press [OK]. • To change the copy destination and the titles to copy (> 52, Copying titles with copying list)

VQT4W68 70 Smart Home Networking (DLNA) Smart Home Networking (DLNA) allows you to watch the contents and broadcasts on Server equipment connected on the same network from Client equipment. This unit can be used both as Server and Client. Additionally, if used as Client, this unit can also be used as Media Renderer, which can be controlled by a Smartphone, etc. Preparation • Network connection (> 17, 21) • Perform Home Network settings of the DLNA compatible equipment. • Some video or broadcasts cannot be enjoyed depending on the DLNA (Client) compatible equipment, the condition of this unit, or the file type. • Ensure that the router for your home network has adequate security system to prevent unauthorized access. You can watch broadcasts received by this unit (Multiroom TV Streaming), videos and photos saved on HDD of this unit on DLNA (Client) compatible equipment. For details regarding the connection and operation of equipment connected via a network, refer to their respective operating instructions. § DLNA function compatible software should be installed. For more details, refer to the Panasonic website. (> left) Preparation • When DLNA (Server) Function is deactivated, make the settings. (> 81, 92, Home Network Settings) 2 Select the item, then press [OK]. • The titles with access restriction (e.g., copy restriction) signals sent from broadcasters are not available for this function. • You cannot play back music from the playback equipment (Client). • The DLNA compatible device that is to be connected to the unit should be connected to the same hub or broadband router as the unit. • Files not on the HDD cannot be played back. • Playing back 3D video recorded on this unit may not work properly. • 3D photos copied to this unit cannot be played back in 3D. • Editing is not possible. For more details, refer to the following website and the operating instructions for each item of equipment. http://panasonic.jp/support/global/cs/ (This site is in English only.) Using this unit as Server 1 Operate the playback equipment (Client) to display the list of contents on this unit. • Refer to their respective operating instructions. This unit (Server) DLNA compatible equipment (Client) §

VQT4W68 71 You can share videos, photos and music stored in the DLNA Certified media server (such as a PC with Windows 7 installed etc.). 1 Press [FUNCTION MENU]. 3 Select the equipment, then press [OK]. • You may not be able to use the Control Panel even if you use the Panasonic DLNA compatible equipment. • Depending on the contents and the connected equipment, playback may not be possible. • Playlist of Windows Media® Player can play back only the contents that are stored in the libraries. • While playing back the 3D programme, you cannot set “3D Settings”. (> 44) • Items displayed in grey on the display cannot be played back by this unit. • Depending on the performance of the connected PC, video frames may be dropped during playback, or video may not be played back at all. (> 105) When this unit works as a DLNA client, following contents are playable. Video § Only when the server is another DIGA. (> 70) Photo Audio • Depending on the server, the contents other than stated above can be played back. Using this unit as Client 2 Select “Home Network ( DLNA Client )” in “Network”, then press [OK]. A list of equipment connected via the network is displayed. • This list can be updated by pressing the red button. 4 Select the item, then press [OK]. • Menu structure will be different depending on the equipment. Select the contents by repeating the operation. • Convenient functions can be used by pressing [OPTION] depending on the contents. • Control Panel Control Panel is displayed once the playback starts. Operation can be performed with [3, 4, 2, 1], [OK] and [EXIT ]. • Press [OK] if the Control Panel is not displayed. • (While paying video or photo) Press [BACK/RETURN ] to hide the Control Panel. This unit (Client) DLNA compatible equipment (Server) Playable contents Container Video codec Audio codec Example of file extension Recorded programmes (XP/SP/LP/ EP/FR)§ MPEG2 Dolby® Digital Linear PCM .mpg .mpeg Recorded programmes (DR/HG/HX/ HE/HL/HM)§ MPEG2 H.264 MPEG HE-AAC Dolby® Digital .m2ts .ts AVCHD§ H.264 Dolby® Digital .mts MP4 H.264 AAC .mp4 MPEG2 MPEG2 Dolby® Digital Linear PCM .mpg .mpeg Format Example of file extension JPEG .jpg MPO .mpo Audio codec Example of file extension MP3 .mp3 FLAC .flac Linear PCM –

VQT4W68 72 Smart Home Networking (DLNA) This unit will work as Media Renderer, which allows you to play back the contents on DLNA Server by operating a Digital Media Controller (a smartphone, etc.). Possible applications: § Digital Media Controller compatible software should be installed. Following steps are necessary to use this unit as Media Renderer. 1 Press [FUNCTION MENU]. 2 Select “Home Network ( Media Renderer )” in “Network”, then press [OK]. 3 Operate the Digital Media Controller compatible equipment. To exit from Home Network ( Media Renderer ) screen Press [BACK/RETURN ]. • Depending on the contents and the connected equipment, playback may not be possible. • Items displayed in grey on the display cannot be played back by this unit. • This unit can be played back via connected equipment only when controlled using Digital Media Controller. • Depending on the performance of the connected PC, video frames may be dropped during playback, or video may not be played back at all. (> 105) Using this unit as Media Renderer This unit (Media Renderer) Controller§ Server This unit (Media Renderer) Server + Controller §

Convenient functions VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy Internet contents such as photos, videos, etc. from VIERA Connect home screen. This unit has no full browser function and all features of websites may not be available. e.g., VIERA Connect Home screen • Images are for illustration purpose, contents may change without notice. Preparation • Network connection (> 17, 21) To exit from VIERA Connect Press [EXIT ]. • When playing content from a disc, SD card or USB device VIERA Connect cannot be accessed. • In the following cases, settings are possible using “Network Service Settings” (> 81, 91) - When restricting the use of VIERA Connect. - When the audio is distorted. • If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended. • Be sure to update the software (firmware) when a software (firmware) update notice is displayed on the screen. If the software (firmware) is not updated, you will not be able to use the VIERA Connect function. • The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. • All features of websites or content of the service may not be available. • Some contents may be inappropriate for some viewers. • Some contents of VIERA Connect may only be available for specific countries and may be presented in specific languages. • If timer recording starts, VIERA Connect will stop. To enjoy video communication (e.g., SkypeTM) • Connect this unit with optional Communication Camera (TY-CC20W or TY-CC10W). Depending on the area, this optional camera may not be available. Please consult your local Panasonic dealer for advice. • For operating method refer to the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.) • Cannot be used while recording, copying, or playing BD-Video. MORE BACK XXXXXX Featured Videos Setup & Help XXXXXX XXXXXX Communication Camera TY-CC20W or TY-CC10W This unit’s rear panel e.g., 1 Press [INTERNET]. The message is displayed. Please read it carefully and then press [OK]. • NETFLIX can be accessed directly by pressing [NETFLIX] button. • The video communication service can be accessed directly by pressing [ ] button. 2 Select the item, then press [OK]. • Operable buttons: [3, 4, 2, 1], [OK], [BACK/RETURN ], colour buttons and number buttons.

2 Select “Others”, then press [OK]. 3 Select the item, then press [OK]. • Selectable items will change depending on the selected drive. [BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW] This function is to name a disc. Refer to “Entering text”. (> 97) • The disc name is displayed in the Blu-ray Disc Management/DVD Management window. • [DVD-R] [DVD-RW] [+R] With a finalised disc, the name is displayed on the Top Menu. • [+RW] The disc name is displayed only if you play the disc on other equipment after creating Top Menu. • Do not perform this operation before copying HD Video (AVCHD) to DVD-R or DVD-R DL. (> 57) [BD-RE] [BD-R] [RAM] Select “Yes”, then press [OK]. e.g., [BD-RE] [BD-R] [RAM] • Photo data (JPEG/MPO) or computer data cannot be deleted. [BD-RE] [RAM] [DVD-RW] [+RW] [SD] [BD-R] [+R] (New disc only) Formatting deletes all contents (including computer data), and they cannot be restored. Check carefully before proceeding. 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. 3 Press [OK]. [RAM] To stop formatting Press [BACK/RETURN ]. • You can cancel formatting if it takes more than 2 minutes. The disc must be reformatted if you do this. • The contents are deleted when you format a disc or card even if you have set protection. • [RAM] Formatting normally takes a few minutes; however, it may take up to a maximum of 70 minutes. • Do not disconnect the AC mains lead while formatting. This can render the disc or the card unusable. • When a disc or card has been formatted using this unit, it may not be possible to use it on any other equipment. • It will become DVD Video format when a DVD-RW recorded in DVD Video Recording format is formatted with this unit. Disc Name Disc Protection • To release the protection Repeat the same steps. • The screen icon will be switched to “Off”. On Disc Name Delete all titles Disc Protection Delete all titles 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. A message appears when finished. 3 Press [OK]. Format Disc/Format Card

You can select the background for DVD-Video Top Menu. Select the background, then press [OK]. • You can change thumbnails displayed in the Top Menu. (> 47, Changing thumbnail) [DVD-R] [DVD-RW] [+R] [+RW] You can select whether to show the Top Menu after finalising or creating Top Menu. Select “Top Menu” or “Title 1”, then press [OK]. Top Menu: The Top Menu appears first. Title 1: The disc content is played without displaying the Top Menu. [DVD-R] [DVD-RW] [+R] (You can play the disc on compatible DVD players by finalising it on the unit.) [BD-R] (Finalising BD-R prevents accidental recording or editing.) 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. 3 Press [OK]. After finalising • [BD-R] [DVD-R] [+R] The disc becomes play-only and you can no longer record or edit. • [DVD-RW] You can record and edit the disc after formatting. • You cannot cancel finalising. • Finalising takes up to 15 minutes (Up to 60 minutes in case of DVD-R DL and +R DL). • Do not disconnect the AC mains lead while finalising. This can render the disc unusable. • Depending on the disc, it may take longer than displayed on the confirmation screen (approximately four times longer). • You cannot finalise discs recorded on other manufacturer’s equipment. • [DVD-R] [DVD-RW] [+R] If you finalise discs recorded on Panasonic equipment other than this unit, the background selected as “Top Menu” may not be displayed. • Discs finalised on this unit may not be playable on other players due to the condition of the recording. [+RW] You can create Top Menu for displaying on other equipment. Make selections from “Top Menu” and “Auto-Play Select” before creating Top Menu. 1 Select “Yes”, then press [OK]. 2 Select “Start”, then press [OK]. 3 Press [OK]. • You cannot use the Top Menu for playing on this unit. • The created menu is deleted when you record or edit the disc. Top Menu Auto-Play Select Finalise Create Top Menu

§ “For recorded titles” only If you intend to move recorded titles to a USB HDD, the USB HDD must be registered to this unit first. Limitation information • A USB HDD with a capacity of less than 160 GB cannot be used. • Registering of a USB HDD will format the USB HDD and all the content already recorded will be deleted. • Up to eight USB HDDs can be registered on this unit. • Registered USB HDDs cannot be used with devices other than this unit. • Certain non-confirmed USB HDDs cannot be used with this unit. • If a problem occurs with the USB HDD, please contact the manufacturer of the device. Connect this unit with optional USB HDD. • Only one USB HDD (For recorded titles) can be connected at the same time. • Do not connect additional HDDs using a USB hub. • For details about connection method, refer to the instructions supplied with the USB HDD. Please use the following procedure to disconnect. Disconnecting without following this procedure may result in the loss of recorded content from the USB HDD or the internal HDD. 1 Press [FUNCTION MENU]. 2 Select “Setup” in “Others”, then press [OK]. 3 Select “Settings for USB HDD” in “HDD / Disc / USB HDD”, then press [OK]. 4 Select “USB HDD Disconnection”, then press [OK]. 5 Select “Yes”, then press [OK]. 6 Disconnect the USB HDD from this unit. Regarding the external HDD (USB HDD) Please use a confirmed USB HDD. For the latest information on confirmed USB HDDs, please check the following website. http://panasonic.jp/support/global/cs/ § Connecting the USB HDD Disconnecting the USB HDD This unit’s rear panel e.g., USB HDD

connecting the USB HDD, go to step 5. 1 Press [FUNCTION MENU]. 2 Select “Setup” in “Others”, then press [OK]. 3 Select “Settings for USB HDD” in “HDD / Disc / USB HDD”, then press [OK]. 4 Select “USB HDD Registration”, then press [OK]. 6 When the registering is complete, message screen appears. Press [OK]. 7 The confirmation screen appears. Press [OK]. To cancel all USB HDD registrations Refer to “Cancellation of all USB HDD Registrations”. (> 87) • If you register a USB HDD, all the content already recorded on the USB HDD will be deleted. • It is not possible to play back the content on the USB HDD whose registration has been cancelled. • You can check the registration number of the USB HDD on the DIRECT NAVIGATOR. (> 36) Registering the USB HDD 5 Select “Yes”, then press [OK]. • If you have already registered eight USB HDDs, it will be necessary to delete one or more of them before registering a new USB HDD. The message screen appears: 1 Select “Yes”, then press [OK]. 2 Select the USB HDD to cancel, then press [OK]. The confirmation screen appears. 3 Select “Yes”, then press [OK].

What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or an amplifier/receiver. You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment. When the following operations are performed, the input channel of the TV will be automatically switched and the screen of this unit will be displayed. Additionally when the TV is off, the TV will automatically turn on. - When play starts on this unit - When an action that uses DIRECT NAVIGATOR etc, is performed When you set the TV to standby mode, this unit is also automatically set to standby mode. • Power off link function does not work when recording, copying etc. The following operations make it possible to keep the power of the unit on and to play music continuously. When the unit is directly connected to an amplifier/receiver. 1 While playing music Press [OPTION]. 2 Select “TV Power Off”, then press [OK]. • Sound may be discontinued for several seconds when the power to the TV is turned off. • This function is available with the TV that supports “HDAVI Control 2” or later. You can operate this unit with the TV remote control. Refer to “PAUSE LIVE TV”. (> 27) • This function is available with the TV that supports “HDAVI Control 3” or later. This function allows you to immediately start recording the programme that you are viewing on the TV. Refer to the TV operating instructions for operation. • This function is available with the TV that supports “HDAVI Control 3” or later. You can operate this unit using the TV remote control. Refer to the operating instructions of the TV about the buttons that you can use. • This function is available with the TV that supports “HDAVI Control 2” or later. • This unit supports “HDAVI Control 5” function. “HDAVI Control 5” is the standard for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment. Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. • VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. • These functions may not work normally depending on the equipment condition. • Use the remote control supplied with this unit if you cannot operate this unit using buttons on the TV remote control. • The operation of this unit may be interrupted when you press certain buttons on the TV remote control. Automatic input switching/ Power on link Power off link Playing music continuously even after turning off power to the TV PAUSE LIVE TV Direct TV Recording Easy control only with VIERA remote control

changing the subtitles and audio languages can be performed during playback of video or music. Also, picture and sound quality can be set to your personal taste. 1 Press [OPTION]. 2 Select “Playback Settings” in “Playback Menu” or select “Playback Settings”, then press [OK]. 3 Select the menu, then press [1] (right). 4 Select the item, then press [1] (right). Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items which cannot be selected or for which the effects do not work properly. To clear the Playback menu Press [BACK/RETURN ]. § With some discs, you may only be able to make changes using the menus on the disc. 5 Select the setting. • Some items can be changed by pressing [OK]. Disc Play Picture Sound Other Angle 1 Soundtrack 1 ENG 2/0 ch Subtitles Off 1 ENG Menu Item Setting e.g., Disc Video The original video recording method (MPEG-4 AVC etc.) appears. Signal Type Primary Video Video The original video recording method appears. Soundtrack Select the type of audio or language. Secondary Video Video Select on/off of images. The original video recording method appears. Soundtrack Select on/off of audio and the language. Soundtrack§ Show or change the soundtrack. Subtitles§ Turn the subtitle on/off, and change the language depending on the media. Multi Audio Switch in the case of multiple audio. Subtitle Language Select the subtitle language in the case of multiple languages. Subtitle Style Select the subtitle style recorded on the disc. Angle§ Change the number to select an angle. Audio Channel Change audio (LR/L/R) during playback. Play Repeat Play Select the item which you want to repeat. Random Select whether to play random or not. Graphic Display Level You can change the 3D position of the playback settings display, etc., during the 3D playback.

Picture Mode Select the picture quality mode during play. • Normal Default setting. • Soft Soft picture with fewer video artifacts. • Fine Details are sharper. • Cinema Mellows movies, enhances detail in dark scenes. • Cartoon A mode suitable for viewing animations. Advanced Settings HD optimizer This will compensate the mosaic noise in the video and haze around the characters precisely. Chroma Process The high-resolution processing of HDMI chroma signals produces a high-resolution picture with rich picture quality. Detail Clarity The picture becomes sharp and detailed. Super Resolution Standard picture quality video is corrected to sharp and crisp picture quality when it is output as 1080i/1080p. Progressive Select the method of conversion for progressive output to suit the type of title being played. • Auto Automatically detects the film and video content, and appropriately converts it. • Video Select this setting when the content is distorted if “Auto” is selected. • Film Select this if the edges of the film content appear jagged or rough when “Auto” is selected. However, if the video content is distorted as shown in the illustration to the right, then select “Auto”. Sound Sound Effects • This function is effective when “Digital Audio Output” is set to “PCM”. (> 88) Re-master 1/Re-master 2 Sound becomes more natural by adding higher frequency signals not recorded on the track. Dialogue Enhancer The volume of the centre channel is raised to make dialogue easier to hear. Other Position Change the position where this menu screen appears on your TV. Signal type k (kHz): Sampling frequency b (bit): Number of bits ch (channel): Number of channels ENG English JPN Japanese ARA Arabic FRA French CHI Chinese HIN Hindi DEU German KOR Korean PER Persian ITA Italian MAL Malay IND Indonesian ESP Spanish VIE Vietnamese MRI Maori NLD Dutch THA Thai BUL Bulgarian SVE Swedish POL Polish RUM Romanian NOR Norwegian CES Czech GRE Greek DAN Danish SLK Slovak TUR Turkish POR Portuguese HUN Hungarian ¢ Others RUS Russian FIN Finnish LPCM/ Digital/ Digital+/ TrueHD/ DTS/DTS-HD/MPEG/ HE-AAC:

You can change the unit’s settings of Tuning, Sound, Display, Connection, Network etc. in the menu. 1 Press [FUNCTION MENU]. 2 Select “Setup” in “Others”, then press [OK]. 3 Select the menu, then press [OK]. To return to the previous screen Press [BACK/RETURN ]. The locations of the setting items are as follows. For details on each setting item, please refer to the following pages. Common procedures 4 Select the item, then make the setting. (> right) • Follow the instructions on the screen if further operations are necessary. • Depending on the connection or the status of this unit some items cannot be selected or changed. Setup OK RETURN Tuning HDD / Disc / USB HDD Picture Sound Display Connection Network Others Menu list Tuning Favourites Edit (> 83) Channel List (> 83) Auto Setup (> 84) Channel Sorting by Region (> 84) Manual Tuning (> 84) Update Channel List (> 84) Signal Condition (> 84) New Channel Message (> 84) Child Lock (> 85) Child Lock List (> 85) Freeview Players (> 85) Preferred Multi Audio (> 85) Multi Audio (> 85) Audio Description (> 85) Preferred Subtitles (> 85) Subtitles (> 85) HDD / Disc / USB HDD Settings for Playback (> 85) 3D BD-Video Playback (> 85) Soundtrack (> 85) Subtitles (> 85) Menu (> 85) Play Video ( AVCHD ) on BD-RE / BD-R (> 85) BD-Live (> 86) BD-Video Parental Control (> 86) DVD-Video Parental Control (> 86) Child Lock (> 86) Pure Sound mode (> 86) Settings for Recording (> 86) REWIND LIVE TV (> 86) Aspect for Recording (> 86) Chapter Creation (> 86) Recording Format for DVD (> 87) BD / DVD Speed for High Speed Copy (> 87) Recording time in EP mode (> 87) HDD Management (> 87) Delete all titles (> 87) Delete all photos (> 87) Format HDD (> 87) Settings for USB HDD (> 87) USB HDD Registration (> 87) USB HDD Disconnection (> 87) USB HDD Management (> 87) Delete all titles (> 87) Format USB HDD (> 87) Cancellation of all USB HDD Registrations (> 87)

Picture Still Mode (> 88) Seamless Play (> 88) Sound Dynamic Range Compression (> 88) Downmix (> 88) Bilingual Audio Selection (> 88) Digital Audio Output (> 88) PCM Down Conversion (> 88) Dolby D / Dolby D + / Dolby TrueHD (> 88) DTS / DTS-HD (> 88) MPEG (> 88) HE-AAC (> 88) BD-Video Secondary Audio (> 88) Audio Delay (> 89) Audio for HG / HX / HE / HL / HM Recording (> 89) Display On-Screen Information (> 89) Unit’s Display (> 89) Screen Saver (> 89) Connection 3D Settings (> 89) 3D Type (> 89) 3D AVCHD Output (> 89) 3D Playback Message (> 89) TV Aspect (> 89) Aspect for 4:3 Video (> 89) TV System (> 89) HDMI Connection (> 90) HDMI Video Format (> 90) 24p Output (> 90) Deep Colour Output (> 90) HDMI Audio Output (> 90) 7.1ch Audio Reformatting (> 90) Contents Type Flag (> 90) VIERA Link (> 90) AV Settings (> 90) AV Input (> 90) Ext Link (> 90) Network Easy Network Setting (> 91) Network Settings (> 91) LAN Connection Mode (> 91) Wireless Settings (> 91) Connection Setting (> 91) Double Speed Mode Setting ( 2.4GHz ) (> 91) IP Address / DNS Settings (> 91) Proxy Server Settings (> 91) Network Service Settings (> 91) Lock (> 91) Automatic Volume Control (> 91) Remote Recording Function Settings (> 92) Remote Recording function (> 92) Device ID (> 92) Initialize Device Password (> 92) Home Network Settings (> 92) Home Network function (> 92) Setting device name (> 92) Conversion Setting for DLNA (> 92) Resolution Setting for DLNA (> 92) Registration type for remote devices (> 92) Remote device list (> 92) Others Standby Settings (> 93) Quick Start (> 93) Automatic Standby (> 93) Automatic Standby after OTR (> 93) Automatic Standby after Copy (> 93) RF OUT ( Aerial Signal ) (> 93) Power Save for Network Standby (> 93) Remote Control (> 94) Clock (> 94) Owner ID (> 94) PIN Entry (> 94) System Update (> 95) Software Update in Standby (> 95) Software Update Now ( Broadcast ) (> 95) Software Update Now ( Internet ) (> 95) Software Licence (> 95) System Information (> 95) Initialize (> 95) Shipping Condition (> 95) Default Settings (> 95)

making viewing and recording easier. After editing as follows, save the Favourites. Press [BACK/RETURN ], then press [OK]. • To select the other Favourites list: Press the green button. • To add channels to the Favourites list: Select the channel in the “All DVB Channels” column, then press [OK]. Repeat this step. • Yellow: Add all the available channels to the Favourites. (This function is available only when there are no channels in the “Favourites”.) • To change the order of the channels list: 1 Select the channel in the “Favourites” column to move, then press the green button. 2 Select the new position, then press the green button. DVB Favourites Editor Add all Select favourites RETURN Add Select channel All DVB Channels Favourites 1 Page down Page up 1 2 3 5 7 8 6 4 • To delete channels: Select the channel in the “Favourites” column, then press [OK]. • Yellow: Delete all channels. • To change the name of the Favourites list: 1 Press the red button in the “Favourites” column. 2 Press [3, 4, 2, 1] to select a character, then press [OK]. Repeat this step to enter other characters. • Red: Delete a character. • Blue: Delete all characters. 3 Press [BACK/RETURN ]. Channel List You can edit the channel list. • To hide unwanted channels 1 Select the channel. 2 Press [OK]. The check mark is removed. • Yellow: Reveal all channels. • To change the channel number assignment 1 Select the channel to change, then press the green button. 2 Enter the channel number to reassign with the number buttons. 3 Press [OK]. • To set the channel manually 1 Press the red button. 2 Refer to “Manual Tuning”. (> 84) All DVB Channels Select Hide RETURN 7 6 5 4 3 2 1 Page down Page up Swap Reveal all Tune

Auto Setup You can restart the Auto Setup. (> 19) PIN is required when you have locked channels. (> 85, Child Lock List) Select “Yes”, then press [OK]. • The timer recording programmes are cancelled. • If you perform “Channel Sorting by Region” (> below), you can sort the channel list best suited to your region after Auto tuning is finished. Channel Sorting by Region If you want to sort the channel list best suited to your region, follow the on-screen instructions to select the region you live in. Normally, you should select “Best signal quality (All Regions)”. Manual Tuning You can add new channels manually. 1 Press [3, 4] to select the frequency. • Adjust the frequency by checking the signal strength and signal quality displays. 2 Press [OK] to start scan. • The set channel is displayed in the table. Update Channel List You can update the channel list to the latest one. Signal Condition You can check the quality and strength of signals. Press [CH W X] to select the channel. • Signal Quality: Green bar: Good Yellow bar: Poor Red bar: Bad • The channels you can receive are affected by weather conditions, seasons, time (day/night), region, length of the cable that is connected to the aerial, etc. • When the signal is too strong (red bar), reduce the signal amplification at your aerial. (For details, consult your dealer.) New Channel Message Set whether to obtain the information automatically when a new DVB channel is added. Channel Name DVB Signal Condition RETURN Channel Up Channel Down Signal Strength Bit Error Rate Signal Quality Frequency [ ] MHz Network Name CH 10 0 10 0

Child Lock List You can restrict the viewing of channels. You can lock each channel or AV input. 1 Select the channel or AV input to lock. 2 Press [OK]. is displayed. • Press [OK] again to cancel. • Green: Lock all channels. • Yellow: Unlock all channels. Freeview Players You can restrict the viewing of Digital teletext (MHEG) unsuitable to children. Preferred Multi Audio Multi Audio Select the language for multi broadcast. If the selected language is not available, the original language will be selected. Audio Description (When Audio Description is available in the programme) When “Automatic” is selected, Audio Description will be set as default while watching. • When “Dolby D / Dolby D + / Dolby TrueHD”, “MPEG” or “HE-AAC” is set to “Bitstream”, the Audio Description may not work. Set them to “PCM” (> 88, Digital Audio Output). Preferred Subtitles Subtitles Choose the subtitle language for broadcast. If the selected language is not available, then the original language will be selected. HDD / Disc / USB HDD Settings for Playback 3D BD-Video Playback Select the playback method of 3D compatible video software. Soundtrack Select the audio language. • If “Original” is selected, the original language of each disc will be selected. • Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 95, Language code list) Subtitles Select the language for subtitle. • If “Automatic” is selected and the language selected for “Soundtrack” is not available, subtitles of that language will automatically appear if available on that disc. • Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 95, Language code list) Menu Select the language for disc menus. • Enter a code with the number buttons when you select “Other ¢¢¢¢”. (> 95, Language code list) Play Video ( AVCHD ) on BD-RE / BD-R When playing a disc which contains the following two video formats; - High Definition video (AVCHD) recorded by the Panasonic video camera, etc., - High Definition quality video recorded on this unit, select which video to play back. • On: Play the High Definition video (AVCHD) • Off: Play the High Definition quality title

BD-Live You can restrict Internet access when BD-Live functions are used. • If “On ( Limit )” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates. BD-Video Parental Control Set an age limit of BD-Video play. • PIN is required to change. (> 24) DVD-Video Parental Control Set a rating level to limit DVD-Video play. • PIN is required to change. (> 24) Child Lock You can restrict playback of the following titles: - Titles that are recorded with guidance information - Titles restricted by Child Lock List (> 85) (Titles with icon in DIRECT NAVIGATOR, etc.) • PIN is required to change. (> 24) Pure Sound mode You can enjoy movies or music in an environment more suitable for viewing by stopping the rotation of the HDD when playing back commercial BD-Videos, DVD-Videos or music CDs. • If “On” is selected, timer recording does not start during playback BD-Video, DVD-Video or music CD. Settings for Recording REWIND LIVE TV Turn on/off the REWIND LIVE TV function. • When “Automatic Standby” is set to “Off” (> 93), “On” cannot be selected. Aspect for Recording Sets the aspect ratio when recording or copying except in DR mode. • If “Automatic” is selected, the title will be recorded with the original aspect ratio at the time when recording started (including when recording started at a commercial, etc.). • In the following cases, the programme will be recorded with the original aspect ratio. - [BD-RE] [BD-R] When the recording mode is set to “XP”, “SP”, “LP”, “EP” or “FR” - [HDD] [RAM] When the recording mode is set to “XP”, “SP”, “LP”, “EP” or “FR” with the “Recording Format for DVD” set to “VR format” • In the following cases, aspect is fixed to 4:3. - [DVD-R] [DVD-RW] When the recording mode is set to “EP” or “FR (recordings 5 hours or longer)” mode. - When recording to a +R, +R DL and +RW. Chapter Creation Set the Chapter Creation method. • Even if “Automatic” is selected, depending on the programme to be recorded, the chapter may not be created correctly.

You can copy titles to DVD in high speed mode, if you set to “Video format” before recording a programme. • This setting is valid for the following cases: - File Conversion (> 48) - Recording from external equipment - Copying from a finalised DVD-Video disc • If “Video format” is selected, the following restrictions are applied to recorded titles. - The settings in “Aspect for Recording” (> 86) and in “Bilingual Audio Selection” (> 88) are applied to titles. - You cannot switch the audio when watching a programme via AV input. BD / DVD Speed for High Speed Copy Select the speed of high-speed copying. If “Normal ( Silent )” is selected, the time required for copying will be longer. Recording time in EP mode Select the maximum number of hours for recording in EP mode (> 114, Recording modes and approximate recording times). HDD Management Press and hold [OK] for 3 seconds to show the following settings. Delete all titles Delete all titles (video) on the built-in HDD. • Delete does not work if one or more titles are protected. Delete all photos Delete all photos on the built-in HDD. Format HDD Formatting deletes all contents on the built-in HDD, and they cannot be restored. Check carefully before proceeding. Settings for USB HDD USB HDD Registration Register the USB HDD. (> 77) USB HDD Disconnection This function puts the USB HDD in a state in which it can be safely disconnected. (> 76) USB HDD Management Press and hold [OK] for 3 seconds to show the following settings. Delete all titles Delete all titles on the USB HDD. • Delete does not work if one or more titles are protected. Format USB HDD Formatting deletes all contents, and they cannot be restored. Check carefully before proceeding. Cancellation of all USB HDD Registrations This function cancels the registrations of all the USB HDDs registered on this unit. Only do this if you are going to dispose of this unit. • Before operation, perform “USB HDD Disconnection” (> above) and remove the USB HDD. • It is not possible to play back the content from a USB HDD whose registration has been cancelled.

Picture Still Mode Select the type of picture shown when you pause play. • Field: Select if jittering occurs when “Automatic” is selected. (The picture is coarser.) • Frame: Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected. (The picture is clearer and finer.) Seamless Play The segments can be played back seamlessly. • When “Off” is selected, frame-dropping between the segments can be avoided, but the video may freeze for a moment between the segments. • Seamless Play function does not work depending on the condition or the kind of programme. Sound Dynamic Range Compression To lower the dynamic range for playback (e.g., at night). • This does not work depending on broadcasts and recorded titles. Downmix Select the downmix system of multi-channel to 2-channels sound. • Select “Surround encoded”, when the connected equipment supports the virtual surround function. • There is no effect on “Bitstream” via HDMI AV OUT and DIGITAL AUDIO OUT terminal. • The audio will be output in “Stereo” in the following cases. - AVCHD playback - [BD-V] : Playback of clicking sound on the menu and audio with secondary video in picture-in-picture mode. Bilingual Audio Selection Select whether to record the audio type (“M1” or “M2”) when: - File Conversion (> 48) - Copying to a DVD-R, DVD-RW, +R and +RW. - “Recording Format for DVD” is set to “Video format”. (> 87) Digital Audio Output PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz. • On: Signals are converted to 48 kHz. (Choose when the connected equipment cannot process signals with a sampling frequency of 96 kHz.) • Off: Signals are output as 96 kHz. • The signals will be converted to 48 kHz regardless of the setting in the following cases. - The signals have a sampling frequency of over 96 kHz. - The disc has copy protection. - “BD-Video Secondary Audio” is set to “On”. ([BD-V]) (> below) Dolby D / Dolby D + / Dolby TrueHD DTS / DTS-HD MPEG HE-AAC Select the audio signal to output. • Select “PCM” when the connected equipment cannot decode the respective audio format. • Not making the proper settings may result in noise. BD-Video Secondary Audio Turn on/off the clicking sound on the menu and audio with secondary video.

corrected by delaying the audio output. Audio for HG / HX / HE / HL / HM Recording If the programme has multi channel audio, priority is given to what you select. • This setting will give effect in the following cases. - Timer recording (> 30) - File Conversion (> 48) - Normal speed copy in HG, HX, HE, HL or HM mode from a title recorded in DR mode. (> 52, 55) Display On-Screen Information Select the time until the channel information screen (> 25) disappears automatically. Unit’s Display Changes the brightness of the unit’s display. • If “Automatic” is selected, the display turns dark during play and disappears when the unit is in standby mode. While using this mode, the standby power consumption can be reduced. • When “Quick Start” is set to “Off” or “Timer Setting for Quick Start” (> 93), the setting for this function is fixed to “Automatic”. Screen Saver This is to prevent burn-in on the screen. Connection 3D Settings 3D Type If 3D video cannot be played back in 3D, you may be able to play it in 3D by changing the setting. • Change the settings for 3D on the TV also when “Side by side” is selected. 3D AVCHD Output If 2D AVCHD video is recognised as 3D video and cannot be played back correctly, you may be able to play it by changing the setting. 3D Playback Message Set to display or hide the 3D viewing warning screen. TV Aspect Set to match the type of TV connected. • 16:9: When connected to a 16:9 widescreen TV. • 4:3: Side picture is trimmed for 16:9 picture. The pictures may be shown in the letterbox style depending on the content. • Letterbox: Black bands appear for 16:9 picture. Aspect for 4:3 Video To play a 4:3 title, set how to show pictures on a 16:9 TV. TV System Set in accordance with the TV System for the connected TV.

HDMI Connection HDMI Video Format You can only select items compatible with the connected equipment. • If “Automatic” is selected, the output resolution best suited to the connected TV (1080p, 1080i, 720p or 576p/480p) is automatically selected. • To enjoy High Quality Video up-converted to 1080p, you need to connect the unit to 1080p compatible HDTV. If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible. 24p Output When playing BD-Video recorded in 24 frames, this unit displays each frame at 1/24 second intervals–the same interval originally shot with the film movie. • This item is effective only when this unit is connected to a TV supporting 1080/24p output and “HDMI Video Format” is set to “Automatic” or “1080p”. (> above) • When BD-Video images other than 24p are played, images are output at 60p. Deep Colour Output This setting is for selecting whether to use Deep Colour output when a TV that supports Deep Colour is connected. HDMI Audio Output Select “Off” when connected to an amplifier/receiver with a DIGITAL AUDIO OUT terminal. 7.1ch Audio Reformatting [BD-V] Surround sound with 6.1 ch or less is automatically expanded and played back at 7.1 ch. • If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1 ch audio, playback will be at 5.1 ch) Audio reformatting is enabled in the following cases: - When you have selected “PCM” in “Digital Audio Output”. (> 88) - When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM. Contents Type Flag If “Automatic” is selected, the optimal method of playback depending on the TV (e.g. cinema) will automatically be selected (only when the TV supports Contents Type Flag). VIERA Link Select “Off” when you do not want to use “HDAVI Control”. AV Settings AV Input Set according to the output from the external equipment. Ext Link Set “Ext Link 1” when a Set Top Box which transmits a control signal via the 21-pin Scart cable is connected. • This setting cannot be made when “TV System” is set to “NTSC” (> 89).

Press [OK] to start Easy Network Setting. (> 21) Network Settings LAN Connection Mode Select the LAN connection method. Wireless Settings This allows to set and check the connection settings of the Wireless router. 1 Encryption type 2 Reception 3 Type of wireless router Connection Setting The Wireless router connection wizard will be displayed. Double Speed Mode Setting ( 2.4GHz ) When a 2.4 GHz wireless format is used, this setting sets the connection speed. • If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or the connection to become unstable. Wireless Settings Double Speed Mode Setting ( 2.4GHz ) Connection Setting Current connection settings The current connection settings and status are displayed. Connection status Current status Network name ( SSID ) Wireless type 802.11n (2.4GHz/20MHz) Authentication type Encryption type AES Connected Reception    e.g., IP Address / DNS Settings Check the connection of the network or set the IP address and DNS. • To set the IP address and DNS 1 Set “IP Address Auto-assignment” and “DNS-IP Auto-assignment” to “Off”. 2 Select the item, then press [OK] to show the respective setting. • When the router’s DHCP server function is not activated, check the numbers of other connected devices such as personal computers, then assign a number different from those of other devices for the “IP Address” and assign the same number for “Subnet Mask” and “Gateway Address”. Proxy Server Settings Check and set the connection to the Proxy server. • Press [OK] to show the respective setting. Network Service Settings Lock You can restrict using VIERA Connect. • PIN is required to change. (> 24) Automatic Volume Control Volume is adjusted automatically to the standard volume while using VIERA Connect. • Depending on contents, this function will not work. • Select “Off” when the audio is warped.

Remote Recording Function Settings You must register to a service to use this function. For details please check the following website. http://panasonic.jp/support/global/cs/ (This site is in English only.) Remote Recording function When you make a timer recording from a smart phone or a PC, etc. away from home, set this function to "On". Device ID This is the device ID and device password required for registering to and using a service. Initialize Device Password The device password for this unit is initialized. • When you initialize the device password, you will not be able to use Remote Recording function. To use the Remote Recording function again, you must re-register to the service. Home Network Settings You can set the DLNA (Server) function. (> 70) Home Network function You can switch between enable/disable of the DLNA (Server) and DMR (Media Renderer) function. • If “On” is selected, the setting for “Quick Start” is fixed to “On”. (> 93) • If “Off” is selected, the setting for “Remote Recording function” is fixed to “Off”. (> above) • This cannot be set to “On” if the connection with the wireless broadband router is not encrypted in the wireless connection. Setting device name It is also possible to change the name of this unit on the network. • Select from a preset list Select the preset name, then press [OK]. • Create name Enter the name. Refer to “Entering text”. (> 97) Conversion Setting for DLNA • On: When playing back on DLNA (Client) compatible equipment, this setting reduces the chance of break-ups and freezing of an image by lowering the image quality. • When this is set to "On", switching the channel or starting playback will take longer. Resolution Setting for DLNA When “Conversion Setting for DLNA” is set to “On”, select the image quality. Registration type for remote devices • Automatic: All connected devices on the same network can access this unit. • Manual: Only registered devices can access this unit. Remote device list • To register equipment manually 1 Select the device name or the MAC Address for the device you want to register, then press [OK]. 2 Select “Yes”, then press [OK]. • To deregister equipment 1 Select the registered equipment, then press [OK]. 2 Select “Yes”, then press [OK]. • This function cannot be enabled when “Automatic” is selected in “Registration type for remote devices”. (> above) • The maximum number of equipment that can be registered is 16.

mode. • Off: Power consumption in standby mode is minimized. (> 110) However, startup time from standby mode will be longer. • Timer Setting for Quick Start: “Quick Start” is activated when the set time comes. (If the clock has not been set, this function is not activated at all hours.) • When “Home Network function” (> 92) or “Remote Recording function” (> 92) is set to “On”, the setting for this function is fixed to “On”. • If “Off” or “Timer Setting for Quick Start” is selected, the setting for “Unit’s Display” is fixed to “Automatic”. (> 89) • The setting may be changed to “On” automatically when the setting for video communication is changed. (> 73) Automatic Standby Set the time to turn the unit to standby mode automatically. When the unit is not operating, the unit will be turned to standby mode once the set time has passed. • When “REWIND LIVE TV” is set to “On” (> 86), “Off” cannot be selected. Automatic Standby after OTR • On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing “Automatic Stop” or “Recording Time” (> 28). Automatic Standby after Copy • On: This unit is turned to standby mode when it is not operated for approximately 5 minutes after completing copy (> 52, Copying from media other than HDD with DIRECT NAVIGATOR, Copying titles with copying list). RF OUT ( Aerial Signal ) Set whether to output the broadcasting signal from RF OUT or not while in standby mode (When “Quick Start” is not activated). • If “On” is selected, the aerial signal is output from this unit. Power Save for Network Standby You can minimize power consumption in standby mode even when the “Quick Start” function is activated. (> 110) • When this is set to “On”, startup time when operating [GUIDE] and [DIRECT NAVIGATOR] from standby mode will be longer.

Remote Control Change the remote control code on the main unit and the remote control if you place other Panasonic products close together. • Use “BD 1”, the factory set code, under normal circumstances. 1 Select the code, then press [OK]. 2 While pressing [OK], press and hold the number button ([1] to [6]) for more than 5 seconds. 3 Press and hold [OK] for more than 5 seconds. 4 Press [OK]. Clock If the time is not set correctly, use the settings listed in the method below. • Automatic This unit usually obtains time and date information from digital broadcasts. • Time Zone When the time is not correct, set “Time Zone”. (GMT - 6 to + 6) • Manual Setting 1 Select “Off” of “Automatic”, then press [OK]. 2 Select the item you want to change. 3 Change the setting. 4 Press [OK] when you have finished the settings. Owner ID In order to prevent another person from using this unit if it is stolen, you can set a PIN and input your personal information (NAME, HOUSE NO, POSTCODE). Once the PIN has been set, you cannot return to the factory preset. Make sure not to forget this. PIN Entry You can set/change the PIN for parental control. 1 Enter your 4-digit PIN with the number buttons. 2 Enter the new 4-digit PIN with the number buttons. • Make a note of PIN in case you forget it. e.g., 3 Press [OK]. OK Remember the PIN. PIN Entry 0 0 0 0

When you set this unit to standby mode, software (firmware) updates (> 96) are downloaded automatically at the time you have specified. Software Update Now ( Broadcast ) Refer to “Software (Firmware) Update”. (> 96) Software Update Now ( Internet ) Refer to “Software (Firmware) Update”. (> 96) Software Licence Information about the software licence is displayed. System Information Display Software (firmware) version, HDAVI Control version, Wireless Module version (When using wireless connection only), and terminal ID (ESN) of this unit. Initialize Shipping Condition All the settings except for some settings return to the factory preset. • The timer recording programmes are also cancelled. • The device password is also initialized. (> 92) Default Settings All the settings other than the tuning settings, clock settings, disc language settings, parental control settings, remote control code, device password, etc. return to the factory presets. Language code list Abkhazian: 6566 Afar: 6565 Afrikaans: 6570 Albanian: 8381 Amharic: 6577 Arabic: 6582 Armenian: 7289 Assamese: 6583 Aymara: 6589 Azerbaijani: 6590 Bashkir: 6665 Basque: 6985 Bengali; Bangla: 6678 Bhutani: 6890 Bihari: 6672 Breton: 6682 Bulgarian: 6671 Burmese: 7789 Byelorussian: 6669 Cambodian: 7577 Catalan: 6765 Chinese: 9072 Corsican: 6779 Croatian: 7282 Czech: 6783 Danish: 6865 Dutch: 7876 English: 6978 Esperanto: 6979 Estonian: 6984 Faroese: 7079 Fiji: 7074 Finnish: 7073 French: 7082 Frisian: 7089 Galician: 7176 Georgian: 7565 German: 6869 Greek: 6976 Greenlandic: 7576 Guarani: 7178 Gujarati: 7185 Hausa: 7265 Hebrew: 7387 Hindi: 7273 Hungarian: 7285 Icelandic: 7383 Indonesian: 7378 Interlingua: 7365 Irish: 7165 Italian: 7384 Japanese: 7465 Javanese: 7487 Kannada: 7578 Kashmiri: 7583 Kazakh: 7575 Kirghiz: 7589 Korean: 7579 Kurdish: 7585 Laotian: 7679 Latin: 7665 Latvian, Lettish: 7686 Lingala: 7678 Lithuanian: 7684 Macedonian: 7775 Malagasy: 7771 Malay: 7783 Malayalam: 7776 Maltese: 7784 Maori: 7773 Marathi: 7782 Moldavian: 7779 Mongolian: 7778 Nauru: 7865 Nepali: 7869 Norwegian: 7879 Oriya: 7982 Pashto, Pushto: 8083 Persian: 7065 Polish: 8076 Portuguese: 8084 Punjabi: 8065 Quechua: 8185 Rhaeto-Romance: 8277 Romanian: 8279 Russian: 8285 Samoan: 8377 Sanskrit: 8365 Scots Gaelic: 7168 Serbian: 8382 Serbo-Croatian: 8372 Shona: 8378 Sindhi: 8368 Singhalese: 8373 Slovak: 8375 Slovenian: 8376 Somali: 8379 Spanish: 6983 Sundanese: 8385 Swahili: 8387 Swedish: 8386 Tagalog: 8476 Tajik: 8471 Tamil: 8465 Tatar: 8484 Telugu: 8469 Thai: 8472 Tibetan: 6679 Tigrinya: 8473 Tonga: 8479 Turkish: 8482 Turkmen: 8475 Twi: 8487 Ukrainian: 8575 Urdu: 8582 Uzbek: 8590 Vietnamese: 8673 Volapük: 8679 Welsh: 6789 Wolof: 8779 Xhosa: 8872 Yiddish: 7473 Yoruba: 8979 Zulu: 9085

Software of this unit can be updated automatically by the following methods at the specified time. (Default setting is 3 a.m. > 95, Software Update in Standby) - From broadcasts - From Internet§ • To update the software (Firmware) immediately, use the following function: - Software Update Now ( Broadcast ): Software of this unit will be updated from broadcasts if update information is detected. - Software Update Now ( Internet )§: Software of this unit will be updated from Internet if update information is detected. § Network connection and setting are required. (> 17, 21) If a software (firmware) update is available, a notification is displayed. Update of the software (firmware) will start when the unit is turned to standby mode. e.g., • When “FINISH” is displayed, update of the software (firmware) has completed. • It may take up to a few hours until the update is completed depending on the network or broadcast environment. • The timer recording always takes preference over the software (Firmware) download; if the timer recording is scheduled to start, the downloading will be performed at the next opportunity. • You can also download the latest software (firmware) from the following website. http://panasonic.jp/support/global/cs/ You cannot operate the unit until the update is complete. Don’t remove the AC mains lead during the update. Removing the AC mains lead while the update is in progress may damage the unit. The unit’s display during the update New software version has been found. The software will be updated automatically after this unit is switched to standby. Do not disconnect the AC mains lead.

1 Select a character, then press [OK]. Repeat this step to enter other characters. • To delete a character: Select the character in the name field, then press [PAUSE ;]. • To enter characters with number buttons: e.g., entering the letter “R” 2 Press [STOP ∫] (Set). “Writing...” appears then the screen returns to the previous screen and so on. To end partway Press [BACK/RETURN ]. (Text is not added.) • The maximum number of characters depends on the media. • If a name is long, parts of it may not be shown in some screens. When the image does not match the screen size of the TV, you can enlarge the image to fill the screen. 1 Press [OPTION]. 2 Select “Aspect”, then press [OK]. 3 Select the item, then press [OK]. • This function does not work when watching 3D programme and playing back 3D title or 3D photo. • It may also be adjusted using the screen mode of the TV etc. • The screen mode is switched to “Normal” in the following situations: - when you change the channel - when you start or end the playback of a title - when you switch the unit on or to standby mode. • [BD-V] [DVD-V] “Side cut” does not have any effect. • When “TV Aspect” (> 89) is set to “4:3” or “Letterbox”, the “Zoom” effect is disabled. The HOLD function deactivates all buttons on the unit and remote control. Press and hold [OK] and [BACK/RETURN ] simultaneously until “X HOLD” appears on the unit’s display. To cancel the HOLD function Press and hold [OK] and [BACK/RETURN ] simultaneously until “X HOLD” disappears. Entering text 1 Press [7] to move to the seventh row. 2 Press [7] twice to highlight “R”. 3 Press [OK]. _ Enter Title Name Space Set Delete Top Menu Preview ( DVD-Video ) OK RETURN Name field: shows the text you have entered e.g., 5 6 8 N O J K L M P Q R T U V 7 7qrs p 7qrs p 7qrs p Switching the aspect ratio of the screen Normal: Normal output Side cut: The black bars on the right and left sides of the 16:9 image disappear and the image is enlarged. Zoom: The black bars on the top and bottom sides of the 4:3 image disappear and the image is enlarged. HOLD function Unit’s display

checks. If the problem still persists, consult your dealer for instructions. Updating to the latest software (firmware) may solve the problem. (> 96) The unit is switched to standby mode automatically. • VIERA Link has worked. (> 78, Power off link) The followings do not indicate a problem with this unit: • Regular disc rotating sounds or HDD rotating sounds. • Poor reception due to atmospheric conditions. • Image disturbance during search. • Image disturbance when replacing 3D discs. • Interruptions in reception due to periodic broadcasting breaks. • When you switch the unit on or to standby mode, there may be an unexpected sound. General operation The unit does not work. • Check the connections. (> 14) • One of the unit’s safety devices may have been activated. Reset the unit as follows: 1 Press [Í/I] on the main unit to switch the unit to standby. • If the unit does not switch to standby, press [Í/I] on the main unit for about 3 seconds. The unit is forcibly switched to standby. Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it. 2 Press [Í/I] on the main unit to switch it on. If the unit still cannot be operated, consult the dealer. Cannot eject a disc. 1 While the unit is in standby mode, press and hold [OK], the yellow button and the blue button at the same time for more than 5 seconds. • “00 RET” is displayed on the unit’s display. 2 Repeatedly press [1] (right) until “06 FTO” is displayed on the unit’s display. 3 Press [OK].

• The remote control and main unit are using different codes. Change the code on the remote control. • Software (firmware) is updating when “UPD /” is displaying on the unit’s display. Wait until the update is completed. (> 96) • The HOLD function is activated. (> 97) • Startup of this unit may be slower depending on the TV settings. “0:00” is flashing on the unit’s display. • Set the clock. (> 81, 94) The clock does not display on the unit when switched to standby. • The clock does not display when “Unit’s Display” is set to “Automatic”. (> 89) Screen size is wrong. • Check the “TV Aspect” or “Aspect for 4:3 Video”. (> 89) • Adjust the aspect ratio setting on TV. • If you connect to 4:3 TV, set “HDMI Video Format” to “576p/480p”. (> 81, 90) • Check “Aspect for Recording” before recording or file conversion. (> 81, 86) The black screen appears on the TV. • This phenomenon may occur, depending on the TV setting, when “Quick Start” is activated. Depending on the TV, this phenomenon may be prevented by reconnecting to a different HDMI input terminal. TV reception is not displayed. • Broadcast signals are not output from this unit’s RF OUT terminal. Select “On” in “RF OUT ( Aerial Signal )”. (> 81, 93) Picture does not appear with the HD quality although HD setting was made. • The pictures are output with 576p/480p depending on the title. The screen changes automatically. • If “Screen Saver” is set to “On”, the screen saver function will be activated when there is no operation for 5 minutes or more. (> 89) There is a lot of image lag when playing video. • Set “HD optimizer” in the Picture menu to “Off”. (> 80) • Set “Audio Delay”. (> 81, 89) Unit's display Press and hold [OK] and the indicated number button at the same time for more than 5 seconds. (> 94) Startup is slow. • Startup takes time in the following situations: - A disc is inserted. - The clock is not set. - Immediately after a power failure or the AC mains lead is connected. - When a BD-J application is executing. - When the “Quick Start” is not activated. (> 93) Displays TV screen and video

disc. While stopped, keep pressing [∫] (STOP) and [< OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from PAL to NTSC or vice versa. • Picture may not be seen when more than 4 devices are connected with HDMI cables. Reduce the number of connected devices. • The picture may be distorted or a black screen may appear between scenes recorded with different aspect ratios. • Set “Deep Colour Output” (> 81, 90) or “Contents Type Flag” (> 81, 90) to “Off”. 3D video is not output correctly. • 3D video may be output correctly by changing the following settings: - “3D Type” of “3D Settings” (> 81, 89) - “Signal Format” (> 44, 3D settings during playback) • Check the settings of the connected TV. • When a non-3D compatible amplifier/receiver is connected between this unit and a TV, 3D video is not output. (> 16) • When the amplifier/receiver which is connected between this unit and a TV is off, 3D video is not output. (> 15) • 3D discs may not be played back correctly due to the settings of the TV. • When “HDMI Audio Output” is set to “Off”, 3D video may not be output correctly. (> 90) The images do not appear on the TV. The picture is distorted during play, or video will not play correctly. • Check the connections. (> 14) • Check the settings of the connected TV, etc. • An incorrect resolution is selected in “HDMI Video Format”. Reset the setting as follows: 1 While the unit is on, press and hold [OK], the yellow button and the blue button at the same time for more than 5 seconds. • “00 RET” is displayed on the unit’s display. 2 Repeatedly press [1] (right) until “04 PRG” is displayed on the unit’s display. 3 Press and hold [OK] for at least 3 seconds. Set the item again. (> 81, 90) • When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output properly, select “Yes” in “Default Settings” and make proper settings. (> 81, 95) The same video is displayed in each left and right half of the screen. • This is a 3D programme of the Side-by-Side type. Change the setting as follows if connecting with a 3D compatible TV: 1 Press [OPTION]. 2 Select “3D Settings”, then press [OK]. 3 Select “Side by side” in “Signal Format”, then press [OK].