Panasonic AJHDC27HP - DVCPRO HD CAMERA Menu Information

MENU button and JOG dial button. The menu configuration is divided into the camera unit’s setting menus and VTR unit’s setting menus. It is possible to select the engineer menu which enables all the setting menu items to be set or, alternatively, the user menu which consists of individually tailored menus so that only those menus which will be used most frequently can be set. The engineer menu is displayed at all times when the AJ-EC3 extension control unit (optional accessory) is connected to the unit for operating the unit by remote control. User menu The user menu was set when the unit was shipped. However, the user can change the configuration of the menus by selecting only those menus which will be used most frequently so that they will be tailored to the user’s individual needs. Set the user menu on the USER MENU SELECT 1, 2, and 3 screen of the engineer menu. The data settings are saved in the non-volatile memory for long-term storage. The menu settings performed in the film mode and video mode are saved separately. Display method OWhen the MENU button is pressed, the camera unit’s USER menu screen is displayed. OWhen the MENU button is pressed again, the VTR unit’s USER menu screen is displayed. OWhen the MENU button is pressed once more, the menu screen display is cleared. Engineer menu All the setting menu items can be set on this menu. The data settings are saved in the non-volatile memory for long-term storage. Display method OHold down the MENU button for at least 3 seconds. OWhen the MENU button is pressed again, the VTR unit’s MAIN MENU screen is displayed. OWhen the MENU button is pressed once more, the menu screen display is cleared. 1A B 0dB C Z73 ¢¢¢¢ VTR USER MENU ¢¢¢¢ ¢¢¢¢ FILM USER MENU ¢¢¢¢ When the power is switched on Status display Camera unit’s user menu VTR unit’s user menu Press the MENU button. Press the MENU button. Press the MENU button. MENU button JOG dial button Film mode and video mode The unit can be set to the film mode or video mode on the OPTION screen of FILM (CAM) MAIN MENU 4. When VIDEO MENU is selected as the CAM MENU SEL setting on the OPTION screen, the FILM USER MENU and FILM MAIN MENU displays change to the CAM USER MENU and CAM MAIN MENU. The menu settings performed in the film mode and video mode are saved separately.

User menu: Engineer menu Basic setting menu operations Displaying menus FILM (CAM) USER MENU Press the MENU button. Press the MENU button. Press the JOG dial button. 1 Press the MENU button. The camera unit’s USER menu screen is displayed. 2 When the MENU button is pressed again, the VTR unit’s USER menu screen is displayed. 1 Hold down the MENU button for at least 3 seconds. 2 When the JOG dial button is pressed, the next MAIN menu screen (of the camera unit) is displayed. 3 When the MENU button is pressed, the VTR unit’s MAIN MENU screen is displayed. } } VTR USER MENU 5 5 FILM (CAM) MAIN MENU 1 FILM (CAM) MAIN MENU 2 FILM (CAM) MAIN MENU 3 FILM (CAM) MAIN MENU 4 Hold down the MENU button for at least 3 seconds. Press the MENU button. Press the JOG dial button. Press the JOG dial button. Press the JOG dial button. Press the JOG dial button. } } } } } } } } VTR MAIN MENU 5 5 Press the MENU button. 5 Press the MENU button. 5 Press the MENU button. 5

n MASTER PED : +000 MASTER DTL : +00 MASTER GAMMA : 0.45 R GAIN : +000 G GAIN : +000 B GAIN : +000 R PEDESTAL : +000 G PEDESTAL : +000 B PEDESTAL : +000 Menu operations (continued) Operations common to the user menu and engineer menu Example: Displaying sub-menus and deciding on settings Turn the JOG dial button. I 1 Turn the JOG dial button while the USER menu screen or MAIN menu screen is displayed. The cursor (n) moves to the SUB menu item. 2 Move the cursor (n) to the desired SUB menu item, and press the JOG dial button. The SUB menu is now displayed. (The cursor appears in the title part of the SUB menu.) 3 Turn the JOG dial button to move the cursor to the desired item to be set, and press the JOG dial button. The digit whose value is to be set now flashes. 4 Turn the JOG dial button to change the setting. n 2222 FILM MAIN MENU1 2222 ROP MATRIX COLOR CORRECTION1 COLOR CORRECTION2 LOW SETTING MID SETTING HIGH SETTING ADITIONAL DTL1 ADITIONAL DTL2 SKIN TONE DTL KNEE/LEVEL GAMMA CAMERA SETTING Example: Press the JOG dial button. I n 2222 FILM MAIN MENU1 2222 n ROP MATRIX COLOR CORRECTION1 COLOR CORRECTION2 LOW SETTING MID SETTING HIGH SETTING ADITIONAL DTL1 ADITIONAL DTL2 SKIN TONE DTL KNEE/LEVEL GAMMA CAMERA SETTING n< ROP > MASTER PED : +000 MASTER DTL : +00 MASTER GAMMA : 0.45 R GAIN : +000 G GAIN : +000 B GAIN : +000 R PEDESTAL : +000 G PEDESTAL : +000 B PEDESTAL : +000 Example: Press the JOG dial button. I n< ROP > MASTER PED : +008 MASTER DTL : +00 MASTER GAMMA : 0.45 R GAIN : +000 G GAIN : +000 B GAIN : +000 R PEDESTAL : +000 G PEDESTAL : +000 B PEDESTAL : +000 Example: Press the JOG dial button. I 5 When the desired setting is reached, press the JOG dial button. The setting is now entered. 6 When other items are to be set, turn the JOG dial button to move the cursor, and change and enter the settings by repeating steps 3 to 5. 7 To move to another SUB menu, turn the JOG dial button to move the cursor to the title part of the SUB menu, and press the JOG dial button. The USER menu screen or MAIN menu screen is now displayed so proceed with operation by following the same steps. 8 Upon completion of the settings, press the MENU button. The settings are now recorded, the setting menu mode is exited, and the normal operation mode is restored. To exit the camera unit’s menu, press the MENU button twice. When the MENU button is pressed once, operation is transferred to the VTR unit’s menu.

FILM (CAM) MAIN MENU 1 ROP MATRIX COLOR CORRECTION 1 COLOR CORRECTION 2 LOW SETTING MID SETTING HIGH SETTING } ADDITIONAL DTL1 ADDITIONAL DTL2 MASTER PED MASTER DTL MASTER GAMMA R GAIN G GAIN B GAIN R PEDESTAL G PEDESTAL B PEDESTAL } MATRIX TABLE MATRIX R-G MATRIX R-B MATRIX G-R MATRIX G-B MATRIX B-R MATRIX B-G R (SAT)/(PHASE) Mg (SAT)/(PHASE) B (SAT)/(PHASE) Cy (SAT)/(PHASE) G (SAT)/(PHASE) Yl (SAT)/(PHASE) R-Mg (SAT)/(PHASE) Mg-B (SAT)/(PHASE) B-Cy (SAT)/(PHASE) Cy-G (SAT)/(PHASE) G-Yl (SAT)/(PHASE) Yl-R (SAT)/(PHASE) } MASTER GAIN H. DTL LEVEL V. DTL LEVEL DTL CORING H. DTL FREQ LEVEL DEPEND. MASTER GAMMA BLACK STRETCH } MATRIX TABLE } COLOR CORRECT } MASTER GAIN H. DTL LEVEL V. DTL LEVEL DTL CORING H. DTL FREQ LEVEL DEPEND. MASTER GAMMA BLACK STRETCH } MATRIX TABLE } COLOR CORRECT } MASTER GAIN H. DTL LEVEL V. DTL LEVEL DTL CORING H. DTL FREQ LEVEL DEPEND. MASTER GAMMA BLACK STRETCH } MATRIX TABLE } COLOR CORRECT KNEE APERTURE SLIM DTL KNEE APE LVL DTL GAIN (+) DTL GAIN (–) DTL CLIP DTL SOURCE V DTL FREQ. SKIN TONE DTL KNEE/LEVEL GAMMA } CAMERA SETTING } SKIN TONE DTL } SKIN TONE ZEBRA SKIN DTL CORING Y MAX Y MIN I CENTER I WIDTH Q WIDTH Q PHASE MASTER PED } MANUAL KNEE KNEE POINT KNEE SLOPE } WHITE CLIP WHITE CLIP LVL A. KNEE POINT A. KNEE LVL A. KNEE RESPONSE MASTER GAMMA (FILM MENU) R GAMMA B GAMMA CINE GAMMA SEL (FILM MENU) BLACK STR. LVL (FILM MENU) DYNAMIC LVL (FILM MENU) DETAIL HIGH COLOR GAMMA TEST SAW FLARE H-F COMPE LIGHTING (FILM MENU) D5600K (CAM MENU) Items indicated with } are items whose settings can only be switched ON and OFF.

FILM (CAM) MAIN MENU 2 VF DIAPLSY VF MARKER VF INDICATOR CAMERA ID SHUTTER SPEED ! LED CAMERA SW MODE SUPER GAIN DISP CONDITION DISP MODE VF OUT VF DTL ZEBRA1 DETECT ZEBRA2 DETECT ZEBRA2 LOW LIGHT LVL SYNCHRO SCAN DISP. ECU MENU DISP. SAFETY ZONE CENTER MARK FRAME SIG MARK LVL EXTENDER SHUTTER ID 2: 2222222222 ID 3: 2222222222 FILTER WHITE GAIN IRIS CAMERA ID ZOOM LVL COLOR TEMP FRAME RATE VERSION ID (FILM MENU) ID 1: 2222222222 SYNCHRO SCAN 1 POSITION 1 SYNCHRO SCAN 2 POSITION 2 POSITION 3 POSITION 4 POSITION 5 POSITION 6 SHUTTER SELECT SYNCHRO SCAN 2 POSITION 2 SEL POSITION 1 SEL POSITION 3 SEL POSITION 4 SEL POSITION 5 SEL POSITION 6 SEL GAIN (0dB) GAIN (–3dB) SHUTTER WHITE PRESET EXTENDER FILTER BLACK STR DAY LIGHT (FILM MENU) D5600K (CAM MENU) MATRIX COLOR CORRECTION FRAME RATE FILTER INH SHOCKLESS AWB COLOR BARS S. GAIN OFF USER1 SW USER2 SW S. BLK LVL ECU DATA SAVE AUTO KNEE SW FRAME MODE FRAME RATE RANGE FRAME RATE SCAN REVERSE S. GAIN VALUE FILM (CAM) MAIN MENU 3 CAM CARD READ/WRITE CAM CARD R/W SELECT GENLOCK/IRIS LENS ADJ SELECT READ SELECT WRITE CARD CONFIG TITLE READ READ USER DATA TITLE 1: TITLE 2: TITLE 3: TITLE 4: TITLE 5: TITLE 6: TITLE 7: TITLE 8: ID READ/WRITE CAM MAIN MENU1 LEVEL R/W CAM MAIN MENU1 SW (}) R/W CAM MAIN MENU2 R/W CAM MAIN MENU3 R/W CAM MAIN MENU4 R/W H PHASE COARSE H PHASE FINE A. IRIS LEVEL A. IRIS PEAK/AVE A. IRIS MODE S. IRIS LEVEL IRIS GAIN IRIS GAIN VALUE F2.8 ADJ F16 ADJ USER SW FRAME RATE LENS FILE (CARD R/W) LENS FILE FILE SELECT WRITE READ RESET ALL TITLE CARD FILE SELECT READ WRITE TITLE

FILM (CAM) MAIN MENU 4 FILM (CAM) USER MENU SELECT1 FILM (CAM) USER MENU SELECT2 BLACK SHADING FLARE INITIALIZE DIAGNOSTIC OPTION ROP LOW SETTING MID SETTING HIGH SETTING ADDITIONAL DTL1 ADDITIONAL DTL2 SKIN TONE DTL KNEE/LEVEL GAMMA CAMERA SETTING VF DISPLAY VF MARKER VF INDICATOR !LED CAMERA SW MODE SUPER GAIN FRAME MODE FILM (CAM) USER MENU SELECT3 CAM CARD READ/WRITE CAM CARD R/W SELECT GENLOCK/IRIS DETECTION CORRECT (DIG) WHITE SHADING DETECTION (V SAW) CORRECT R FLARE G FLARE B FLARE COLORIMETRY MATRIX READ FACTORY DATA WRITE USER DATA SCENE SEL READ WRITE RESET TITLE 1 TITLE 2 TITLE 3 TITLE 4 CAMSOFT (IN) CAMSOFT (OUT) CAM TABLE PLD (CAM) PLD (SHD) SHD, ABB SW CTRL AWB AREA AWB & ABB OFFSET CAM MENU SEL SYSTEM FREQ EVALUATION ENG SECURITY S/N S/N DETAIL H-F COMPE. GAMMA MATRIX FLARE M. PED MODULATION MODULATION DETAIL H-F COMPE. GAMMA MATRIX FLARE M. PED RESOLUTION RESOLUTION DETAIL H-F COMPE. GAMMA MATRIX FLARE M. PED SENSITIVITY SENSITIVITY KNEE W. CLIP M. PED LENS FILE LENS FILE (CARD R/W) PLD (FM) EVF SEL SUPER DTL Item Variable range Remarks MASTER PED (FILM MENU) (CAM MENU) –200 : +000 : +018 : +200 (Max.) VF display USER ENG MASTER PEDESTAL level setting. How to interpret the menu lists The following abbreviations indicate whether the menu changes are stored (written) in the corresponding data or loaded (read) from the data. The changes cannot be stored or loaded when “/” is indicated. S: The changes can be stored or loaded as scene file data. C: The changes can be stored or loaded using CARD READ/WRITE. U: The changes can be stored or loaded as user data. Refer to “INITIALIZE screen” (page 111). F: The changes can be stored or loaded as READ FACTORY DATA. Refer to “INITIALIZE screen” (page 111). E: The changes can be stored or loaded using ECU DATA SAVE. Refer to “Connecting the extension control unit” (page 41). This column indicates the variable range in which the item can be set and the choice of the settings which can be selected for the item. Described in this column are the operations which can be expected to result when the item’s settings are selected. USER: This appears on the user menu screen. ENG: This appears on the engineer menu screen. S C U F E

VTR MAIN MENU FUNCTION BATTERY/TAPE VTR VF INDICATOR MIC/AUDIO TIME/DATE NEWS REC MODE HUMID OPE REC START PAUSE TIMER RETAKE MODE INTERVAL REC MODE INTERVAL REC TIME INTERVAL PAUSE TIME ECU REC CHK SW CHARACTER ON SDI BATTERY SELECT EXT DC IN SELECT BATT NEAR END ALARM BATT NEAR END CANCEL BATT END ALARM BATT REMAIN FULL TAPE NEAR END ALARM TAPE NEAR END TIME TAPE END ALARM TAPE REMAIN/$ BATTERY SETTING AJ-BP490 AU-BP402 HP-30A PRO14 TRIM14 TRIM13 DIGITAL14 DIGITAL13 BP-H90 BP-H100 NP-L40 NP-L40 D BP-L60/90 NP-1B TAPE (IND) BATTERY (IND) LEVEL METER (IND) AUDIO IN (IND) TC (IND) VTR WARNING (IND) SAVE LED FRONT MIC POWER MIC LOWCUT CH1 MIC LOWCUT CH2 LIMITER TEST TONE CUE SELECT EMBEDDED AUDIO (60 Hz) TC/UB TC MODE UB MODE TCG SET HOLD FIRST REC TC P.OFF LCD DISPLAY TC OUT VITC UB MODE TC DISP SEL DIAGNOSTIC OPERATION DRUM RUNNING THREADING VTR SYSCON SERVO MECHACON FRONT YEAR MONTH DAY HOUR MINUTE $ TIME/DATE SET VTR CARD READ/WRITE READ WRITE READ USER DATA VTR INITIALIZE READ FACTORY DATA WRITE VTR USER DATA VTR USER MENU SELECT FUNCTION NEWS REC MODE HUMID OPE REC START PAUSE TIMER RETAKE MODE INTERVAL REC MODE INTERVAL REC TIME INTERVAL PAUSE TIME ECU REC CHK SW CHARACTER ON SDI BATTERY/TAPE BATTERY SELECT EXT DC IN SELECT BATT NEAR END ALARM BATT NEAR END CANCEL BATT END ALARM BATT REMAIN FULL TAPE NEAR END ALARM TAPE NEAR END TIME TAPE END ALARM TAPE REMAIN/ $ VTR VF INDICATOR TAPE (IND) BATTERY (IND) LEVEL METER (IND) AUDIO IN (IND) TC (IND) VTR WARNING (IND) SAVE LED MIC/AUDIO FRONT MIC POWER MIC LOWCUT CH1 MIC LOWCUT CH2 LIMITER TEST TONE CUE SELECT EMBEDDED AUDIO (60 Hz) TC/UB TC MODE UB MODE TCG SET HOLD FIRST REC TC P.OFF LCD DISPLAY TC OUT VITC UB MODE TC DISP SEL MONITOR MARKER SAFETY ZONE CENTER MARK FRAME SIG MARK COMPRESSION (IND) A/V SYNCHRO COMPRESSION MODE COMPRESSION MODE MONITOR MARKER SAFETY ZONE CENTER MARK FRAME SIG MARK COMPRESSION (IND) A/V SYNCHRO SDI IF CODEC AUDIO

The main menu consists of FILM (CAM) MAIN MENU (1 to 4) of the camera and the VTR MAIN MENU of the VTR. These screens are index screens which are used to open the sub-menus. The setting menu is operated with the MENU button and JOG dial button. (Refer to pages 86 to 88 for the menu operations.) FILM (CAM) MAIN MENU 1 screen SUB menu VF display Remarks ROP USER ENG Index for opening the ROP screen. MATRIX ENG Index for opening the MATRIX screen. COLOR CORRECTION1 ENG Index for opening the COLOR CORRECTION 1 screen. COLOR CORRECTION2 ENG Index for opening the COLOR CORRECTION 2 screen. LOW SETTING USER ENG Index for opening the LOW SETTING screen. MID SETTING USER ENG Index for opening the MID SETTING screen. HIGH SETTING USER ENG Index for opening the HIGH SETTING screen. ADDITIONAL DTL1 USER ENG Index for opening the ADDITIONAL DTL 1 screen. ADDITIONAL DTL2 USER ENG Index for opening the ADDITIONAL DTL 2 screen. SKIN TONE DTL USER ENG Index for opening the SKIN TONE DTL screen. KNEE/LEVEL USER ENG Index for opening the KNEE/LEVEL screen. GAMMA USER ENG Index for opening the GAMMA screen. CAMERA SETTING USER ENG Index for opening the CAMERA SETTING screen. FILM (CAM) MAIN MENU 2 screen SUB menu VF display Remarks VF DISPLAY USER ENG Index for opening the VF DISPLAY screen. VF MARKER USER ENG Index for opening the VF MARKER screen. VF INDICATOR USER ENG Index for opening the VF INDICATOR screen. CAMERA ID ENG Index for opening the CAMERA ID screen. SHUTTER SPEED ENG Index for opening the SHUTTER SPEED screen. SHUTTER SELECT ENG Index for opening the SHUTTER SELECT screen. FILM (CAM) MAIN MENU 2 screen SUB menu VF display Remarks !LED USER ENG Index for opening the !LED screen. CAMERA SW MODE USER ENG Index for opening the CAMERA SW MODE screen. SUPER GAIN USER ENG Index for opening the SUPER GAIN screen. FRAME MODE USER ENG Index for opening the FRAME MODE screen. FILM (CAM) MAIN MENU 3 screen SUB menu VF display Remarks CAM CARD READ/WRITE USER ENG Index for opening the CAM CARD READ/WRITE screen. CAM CARD R/W SELECT USER ENG Index for opening the CARD R/W SELECT screen. GENLOCK/IRIS USER ENG Index for opening the GENLOCK/IRIS screen. LENS ADJ ENG Index for opening the LENS ADJ screen. FILM (CAM) MAIN MENU 4 screen SUB menu VF display Remarks CAM USER MENU SELECT1 ENG Index for opening the FILM (CAM) USER MENU SELECT 1 screen. CAM USER MENU SELECT2 ENG Index for opening the FILM (CAM) USER MENU SELECT 2 screen. CAM USER MENU SELECT3 ENG Index for opening the FILM (CAM) USER MENU SELECT 3 screen. BLACK SHADING ENG Index for opening the BLACK SHADING screen. WHITE SHADING ENG Index for opening the WHITE SHADING screen. FLARE ENG Index for opening the FLARE screen. COLORIMETRY ENG Index for opening the COLORIMETRY screen. INITIALIZE ENG Index for opening the INITIALIZE screen. DIAGNOSTIC ENG Index for opening the DIAGNOSTIC screen. EVALUATION ENG Index for opening the EVALUATION screen. OPTION ENG Index for opening the OPTION screen.

ROP screen The ROP (Remote Operation Panel) is set on this screen. Item Variable range Remarks MASTER PED (FILM MENU) (CAM MENU) –200 : +000 : +018 : +200 (Max.) VF display USER ENG MASTER PEDESTAL level setting. MASTER DTL –31 : +00 : +31 USER ENG H. DTL/V. DTL level setting. MASTER GAMMA 0.35 : 0.45 : 0.75 USER ENG MASTER GAMMA setting. (0.01 step) Three different values can be stored for LOW, MID and HIGH in the memory. R GAIN –200 : +000 : +200 (Max.) USER ENG For setting R channel gain. G GAIN –200 : +000 : +200 (Max.) USER ENG For setting G channel gain. B GAIN –200 : +000 : +200 (Max.) USER ENG For setting B channel gain. R PEDESTAL –100 : +000 : +100 (Max.) USER ENG For setting R channel PEDESTAL level. G PEDESTAL –100 : +000 : +100 (Max.) USER ENG For setting G channel PEDESTAL level. B PEDESTAL –100 : +000 : +100 (Max.) USER ENG For setting B channel PEDESTAL level. The underlining in the variable range column indicates the setting in the preset mode. MATRIX screen The camera matrix is set on this screen. Item Variable range Remarks ∫MATRIX TABLE A B VF display ENG For selecting the color adjustment display. MATRIX R-G –31 : +00 : +31 ENG Color adjustment MATRIX R-B –31 : +00 : +31 ENG Color adjustment MATRIX G-R –31 : +00 : +31 ENG Color adjustment MATRIX G-B –31 : +00 : +31 ENG Color adjustment MATRIX B-R –31 : +00 : +31 ENG Color adjustment MATRIX B-G –31 : +00 : +31 ENG Color adjustment OThe white balance and black balance will not change even if the MATRIX is changed. OTwo tables, A and B, can be stored in the memory for the MATRIX TABLE item. O“00” applies for all the preset modes in MATRIX TABLE B. S C U F E S C U F E S C U F E S C U F S C U F E S C U F E S C U F E S C U F S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

COLOR CORRECTION 1 screen The camera color saturation adjustments and hue adjustments are set on this screen. Item Variable range Remarks R (SAT) R (PHASE) –63 : +00 : +63 VF display ENG Color saturation adjustment and hue adjustment: red Mg (SAT) Mg (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: magenta B (SAT) B (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: blue Cy (SAT) Cy (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: cyan G (SAT) G (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: green Yl (SAT) Yl (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: yellow COLOR CORRECTION 2 screen The camera color saturation adjustments and hue adjustments are set on this screen. Item Variable range Remarks R-Mg (SAT) R-Mg (PHASE) –63 : +00 : +63 VF display ENG Color saturation adjustment and hue adjustment: between red and magenta Mg-B (SAT) Mg-B (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between magenta and blue B-Cy (SAT) B-Cy (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between blue and cyan Cy-G (SAT) Cy-G (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between cyan and green G-Yl (SAT) G-Yl (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between green and yellow Yl-R (SAT) Yl-R (PHASE) –63 : +00 : +63 ENG Color saturation adjustment and hue adjustment: between yellow and red The underlining in the variable range column indicates the setting in the preset mode. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

LOW SETTING screen The low level gain is set on this screen. Item Variable range Remarks ∫MASTER GAIN (FILM MENU) –3dB : 0dB : 30dB VF display USER ENG –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. H. DTL LEVEL (FILM MENU) (CAM MENU) 00 : 08 : 12 : 63 USER ENG For setting H.DTL (detail) level. V. DTL LEVEL (FILM MENU) (CAM MENU) 00 : 12 : 16 : 31 USER ENG For setting V.DTL (detail) level. H. DTL LEVEL (FILM MENU) (CAM MENU) 00 : 08 : 12 : 63 USER ENG For setting H.DTL (detail) level. V. DTL LEVEL (FILM MENU) (CAM MENU) 00 : 12 : 16 : 31 USER ENG For setting V.DTL (detail) level. DTL CORING 00 : 02 : 15 USER ENG For setting detail signal noise removal level. H. DTL FREQ 00 : 22 : 31 USER ENG For selecting H.DTL FREQUENCY. LEVEL DEPEND. 0 : 2 : 5 USER ENG For setting LEVEL DEPEND. The detail of only the dark areas is removed when the Y detail is boosted. The higher the figure set for this item, the broader the range of the detail which is removed. MASTER GAMMA 0.35 : 0.45 : 0.75 USER ENG Master gamma setting. (0.01 step) BLACK STRETCH +3, +2, +1, OFF, –1, –2, –3 USER ENG For correcting the black level gradation. BLACK STRETCH +3, +2, +1, OFF, –1, –2, –3 USER ENG For correcting the black level gradation. ∫MATRIX TABLE A B OFF USER ENG For selecting the color correction matrix table. ∫COLOR CORRECT ON OFF USER ENG For setting the 12-axis independent color correction to ON or OFF. The underlining in the variable range column indicates the setting in the preset mode. MID SETTING screen The middle level gain is set on this screen. Item Variable range Remarks ∫MASTER GAIN (FILM MENU) –3dB : 3dB : 30dB VF display USER ENG –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. (CAM MENU) –6dB : 6dB : 30dB –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. (CAM MENU) –6dB : 0dB : 30dB –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. DTL CORING 00 : 02 : 15 USER ENG For setting detail signal noise removal level. H. DTL FREQ 00 : 22 : 31 USER ENG For selecting H.DTL FREQUENCY. LEVEL DEPEND. 0 : 2 : 5 USER ENG For setting LEVEL DEPEND. The detail of only the dark areas is removed when the Y detail is boosted. The higher the figure set for this item, the broader the range of the detail which is removed. MASTER GAMMA 0.35 : 0.45 : 0.75 USER ENG Master gamma setting. (0.01 step) ∫MATRIX TABLE A B OFF USER ENG For selecting the color correction matrix table. ∫COLOR CORRECT ON OFF USER ENG For setting the 12-axis independent color correction to ON or OFF. S C U F E S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

The high level gain is set on this screen. Item Variable range Remarks ∫MASTER GAIN (FILM MENU) –3dB : 6dB : 30dB VF display USER ENG –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. (CAM MENU) –6dB : 12dB : 30dB –6dB, –3 dB, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 18 dB, 24 dB or 30 dB can be set. DTL CORING 00 : 05 : 15 USER ENG For setting detail signal noise removal level. H. DTL FREQ 00 : 22 : 31 USER ENG For selecting H.DTL FREQUENCY. LEVEL DEPEND. 0 : 5 USER ENG For setting LEVEL DEPEND. The detail of only the dark areas is removed when the Y detail is boosted. The higher the figure set for this item, the broader the range of the detail which is removed. MASTER GAMMA 0.35 : 0.45 : 0.75 USER ENG Master gamma setting. (0.01 step) ∫MATRIX TABLE A B OFF USER ENG For selecting the color correction matrix table. ∫COLOR CORRECT ON OFF USER ENG For setting the 12-axis independent color correction to ON or OFF. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 1 (continued) ∫ADDITIONAL DTL 1 screen The special detail features of the camera are set on this screen. Item Variable range Remarks KNEE APERTURE ON OFF VF display USER ENG For setting the knee aperture to ON or OFF. At the “ON” setting, the detail above the knee point is boosted. SLIM DTL ON OFF USER ENG For setting the mode to make the detail finer to ON or OFF. ADDITIONAL DTL2 screen The special detail features of the camera are set on this screen. Item Variable range Remarks KNEE APE LVL 0 : 5 VF display USER ENG For changing the detail level in the high- brightness areas. DTL GAIN (+) –31 : +00 : +31 USER ENG For changing the H detail level in the “+” direction. DTL GAIN (–) –31 : +00 : +31 USER ENG For changing the H detail level in the “–” (bottom) direction. DTL CLIP 00 : 47 : 63 USER ENG For changing the clipping level of the detail signal. DTL SOURCE (G+B)/2 (R+G)/2 (2G+R+B)/4 (3G+R)/4 R G USER ENG For setting the ratio between the RGB signal components which generate the detail signal. V DTL FREQ. 360TV 450TV 540TV 630TV 720TV USER ENG For setting the V. DTL FREQUENCY. BLACK STRETCH +3, +2, +1, OFF, –1, –2, –3 USER ENG For correcting the black level gradation. H. DTL LEVEL (FILM MENU) (CAM MENU) 00 : 08 : 12 : 63 USER ENG For setting H.DTL (detail) level. V. DTL LEVEL (FILM MENU) (CAM MENU) 00 : 12 : 16 : 31 USER ENG For setting V.DTL (detail) level. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F S C U F

SKIN TONE DTL screen The skin tone detail of the camera is set on this screen. Item Variable range Remarks ∫SKIN TONE DTL ON OFF VF display USER ENG For setting the skin tone detail to ON or OFF. ∫SKIN TONE ZEBRA ON OFF USER ENG For setting zebra in the skin tone range to ON or OFF. At the “ON” setting, the amount of detail in the zebra viewing range is varied. SKIN DTL CORING 0 : 5 : 7 USER ENG For setting detail signal noise removal level. Y MAX 000 : 190 : 255 ENG For setting the maximum luminance level at which the detail is boosted. Y MIN 000 : 010 : 255 ENG For setting the minimum luminance level at which the detail is boosted. I CENTER 000 : 055 : 255 ENG For setting the medium I- axis level at which the detail is boosted. I WIDTH 000 : 090 : 255 ENG For setting the minimum I- axis level at which the detail is boosted. Q WIDTH 000 : 010 : 255 ENG For setting the maximum Q-axis level at which the detail is boosted. Q PHASE –31 : +00 : +31 ENG For setting the minimum Q-axis level at which the detail is boosted. The underlining in the variable range column indicates the setting in the preset mode. KNEE/LEVEL screen The knee settings of the camera are performed on this screen. Item Variable range Remarks MASTER PED (FILM MENU) (CAM MENU) –200 : +000 : +018 : +200 VF display USER ENG For setting the master pedestal level (MASTER PED). ∫MANUAL KNEE ON OFF USER ENG For setting the mode when the AUTO KNEE switch is at OFF. KNEE POINT (FILM MENU) 30% : 65% : 90% USER ENG For setting the manual knee point position. This setting is canceled when FILM REC has been selected as the CINE GAMMA SEL item setting on the GAMMA screen. (CAM MENU) 80.00% : 95.00% : 107.00% KNEE SLOPE (FILM MENU) 150% : 500% : 600% USER ENG For setting the manual knee slope. This setting is canceled when FILM REC has been selected as the CINE GAMMA SEL item setting on the GAMMA screen. (CAM MENU) 00 : 50 : 99 ∫WHITE CLIP ON OFF USER ENG For setting white clipping to ON or OFF. WHITE CLIP LVL 090% : 109% USER ENG For setting the white clipping level. A. KNEE POINT (CAM MENU) (FILM MENU) 80.00% : 95.00% : 100.00% : 107.00% USER ENG For setting the auto knee point position. The gamma characteristics are set using the KNEE POINT and KNEE SLOPE items when VIDEO REC was selected as the CINE GAMMA SEL item setting on the GAMMA screen. A. KNEE LVL 100 : 108 109 USER ENG For setting the maximum auto knee level. A. KNEE RESPONSE 1 2 3 4 USER ENG For setting the AUTO KNEE response rate. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

The underlining in the variable range column indicates the setting in the preset mode. GAMMA screen The gamma settings of the camera are performed on this screen. Item Variable range Remarks R GAMMA (CAM MENU) –15 : +00 : +15 VF display USER ENG Amount by which the R channel gamma is corrected in respect of the master gamma level. MASTER GAMMA (FILM MENU) 0.35 : 0.45 : 0.75 USER ENG For setting the master gamma when the unit is to be operated in the film mode. B GAMMA (CAM MENU) –15 : +00 : +15 USER ENG Amount by which the B channel gamma is corrected in respect of the master gamma level. CINE GAMMA SEL (FILM MENU) FILM REC VIDEO REC USER ENG For setting the gamma characteristics when the unit is to be operated in the film mode. FILM REC: The cine gamma characteristics for films are used. VIDEO REC: The cine gamma characteristics for video are used. BLACK STR. LVL (FILM MENU) 00% : 30% USER ENG For setting the black strech level point position. OThis setting is valid when FILM REC has been selected as the CINE GAMMA SEL item setting. OThe KNEE POINT and KNEE SLOPE item settings on the KNEE/LEVEL screen are canceled. DYNAMIC LVL (FILM MENU) 200% 300% 400% 500% USER ENG For setting the dynamic range. OThis setting is valid when FILM REC has been selected as the CINE GAMMA SEL item setting. OThe KNEE POINT and KNEE SLOPE item settings on the KNEE/LEVEL screen are canceled. The gamma characteristics are set using the BLACK STR. LVL and DYNAMIC LVL items when FILM REC has been selected as the CINE GAMMA SEL item setting. ∫CAMERA SETTING screen The basic settings of the camera are set to ON or OFF on this screen. Item Variable range Remarks DETAIL ON OFF VF display USER ENG For setting the detail (H, V) to ON or OFF. (Both the H detail and V detail are simultaneously set to either ON or OFF.) HIGH COLOR ON OFF USER ENG For setting the mode for expanding the dynamic range of the colors to ON or OFF. At the ON setting, the colors above the knee point are boosted. GAMMA ON OFF USER ENG For setting the gamma correction to ON or OFF. TEST SAW ON OFF USER ENG For setting the test signal to ON or OFF. FLARE ON OFF USER ENG For setting the flare compensation to ON or OFF. H-F COMPE ON OFF USER ENG For setting the high-range frequency compensation mode to ON or OFF. D5600 K (CAM MENU) ON OFF USER ENG For setting the 5600 K presetting for the white balance to ON or OFF. The black balance must always be adjusted (see page 56) when this item’s setting has been changed. LIGHTING (FILM MENU) TUNGSTEN DAY LIGHT USER ENG For switching the white balance preset value to the tungsten lighting type or daylight type. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

The information to be displayed inside the viewfinder is set on this screen. Item Variable range Remarks DISP CONDITION NORMAL HOLD VF display USER ENG NORMAL: The statuses are displayed at all times. HOLD: The statuses are displayed when MODE CHECK SW is ON. DISP MODE 1 2 3 USER ENG VF OUT Y NAM R G B USER ENG For selecting VF OUT. NAM (N Additive Mix): The signal with the highest level among the R, G and B signals is output. VF DTL 0 : 4 5 USER ENG For selecting VF DTL. The detail of the signals for VF is further boosted. At the “0” setting, the detail is the same as the unit’s. ZEBRA1 DETECT (CAM MENU) (FILM MENU) 000% : 070% : 080% : 109% USER ENG For setting the ZEBRA1 detection level (IRE level). ZEBRA2 DETECT 000% : 085% : 109% USER ENG For setting the ZEBRA2 detection level (IRE level). ZEBRA2 ON OFF SPOT USER ENG For setting ZEBRA2 to ON or OFF and selecting SPOT. See “Zebra pattern display.” When used at the “SPOT” setting, ensure that the ZEBRA2 DETECT value is set higher than the ZEBRA1 DETECT value. If the ZEBRA2 DETECT value is lower than the ZEBRA1 DETECT value, the ZEBRA display will not appear. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 Change Display 1 2 3 t t ± FILTER t t ± GAIN t t ± AWB t ± ± AUTO KNEE SW t ± ± SHUTTER t ± ± ABB STATUS t ± ± AWB STATUS Item Variable range Remarks VF display LOW LIGHT LVL (FILM MENU) (CAM MENU) OFF 20% 25% : 40% 45% USER ENG For selecting the light level for the LOW LIGHT display when the amount of light entering the camera is too low. SYNCHRO SCAN DISP. (CAM MENU) (FILM MENU) sec % deg USER ENG For setting the unit in which the synchro scan mode is to be displayed. ECU MENU DISP. ON OFF USER ENG For setting whether the menu screen is to be displayed when menu operations are performed using the AJ-EC3 Extension Control Unit. Zebra pattern display Video level S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

The information to be displayed inside the viewfinder is set on this screen. Item Variable range Remarks EXTENDER ON OFF VF display USER ENG For setting the extender display to ON or OFF. SHUTTER ON OFF USER ENG For setting the shutter speed display to ON or OFF. FILTER ON OFF USER ENG For setting the filter No. display to ON or OFF. WHITE ON OFF USER ENG For setting the AWB PRE/A/B display to ON or OFF. GAIN ON OFF USER ENG For setting the currently selected gain display to ON or OFF. IRIS S IRIS S+IRIS OFF USER ENG S: Only the super iris ON status is displayed. IRIS: Only the aperture value is displayed. S+IRIS: Both the super iris ON status and the aperture value are displayed. OFF: Neither the super iris ON status nor the aperture value is displayed. CAMERA ID ON OFF USER ENG For setting the ID display during color bar displaying. ZOOM LVL ON OFF USER ENG For setting the zoom position value display to ON or OFF. COLOR TEMP ON OFF USER ENG For setting the color temperature display to ON or OFF. FRAME RATE ON OFF USER ENG For setting the frame rate display to ON or OFF. VERSION ID (FILM MENU) ON OFF USER ENG For displaying the gamma curve used when the internal color bar signal recording mode is established. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) VF MARKER screen The information to be displayed inside the viewfinder is set on this screen. Item Variable range Remarks SAFETY ZONE OFF 1 : 3 : 12 VF display USER ENG For selecting the safety zone display. 1 : 80% and 90% corner display 2 : 80% corner display 3 : 90% corner display 4 : 80% and 90% box display 5 : 80% box display 6 : 90% box display 7 : 80% and 90% corner display in 4:3 mode 8 : 80% corner display in 4:3 mode 9 : 90% corner display in 4:3 mode 10 : 80% and 90% box display in 4:3 mode 11 : 80% box display in 4:3 mode 12 : 90% box display in 4:3 mode CENTER MARK ON OFF USER ENG For setting the center marker display to ON or OFF. FRAME SIG 4 : 3 13 : 9 14 : 9 VISTA CNSCO USER ENG For selecting the frame marker display. (VISTA = 1 : 1.85) (CNSCO = 1 : 2.35) MARK ON OFF USER ENG For setting the frame marker display to ON or OFF. LVL 00 : 15 USER ENG For setting the picture levels on the outside of the frame marker. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) 1. Turn the JOG dial button to move the arrow (cursor) to the ID 1:, ID 2: or ID 3: item. 2. When the JOG dial button is pressed, the arrow (cursor) moves to the ID input area, and the input mode is established. 3. Press the JOG dial button again and turn it until the character to be set is displayed. When the button is turned, the character displayed is switched in the following sequence: Space: 3 7 letters: A—Z 7 numbers: 0—9 7 symbols: ’, >, <, /, – 4. Press the JOG dial button to enter the character. 5. Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 3 and 4 to input the characters (maximum of 10). 6. When the characters have been input, turn the JOG dial button to move the arrow (cursor) to the “:” position. 7. When the JOG dial button is pressed, the arrow (cursor) returns to the ID 1:, ID 2: or ID 3: item. n ID 1:2222222222 ID 2: ID 3: m ID 1:2222222222 CAMERA ID screen The camera ID is set on this screen. Item Variable range Remarks ID 1: 2222222222 ID 2: 2222222222 ID 3: 2222222222 == VF display ENG For inputting the camera ID (max. 10 characters). Select whether this setting is to be mixed by selecting ON or OFF for CAMERA ID on the VF DISPLAY screen. SHUTTER SPEED screen On this screen, the shutter speed to be used is selected from among the POSITION items each of which contains a shutter speed which was set on the SHUTTER SELECT screen. Item Variable range Remarks SYNCHRO SCAN 1 ON OFF VF display ENG For selecting SYNCHRO SCAN 1. SYNCHRO SCAN 2 ON OFF ENG For selecting SYNCHRO SCAN 2. POSITION 1 ON OFF ENG For selecting POSITION 1. POSITION 2 ON OFF ENG For selecting POSITION 2. POSITION 3 ON OFF ENG For selecting POSITION 3. POSITION 4 ON OFF ENG For selecting POSITION 4. POSITION 5 ON OFF ENG For selecting POSITION 5. POSITION 6 ON OFF ENG For selecting POSITION 6. C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E The contents are cleared when the READ FACTORY DATA is executed. The data will be stored in the memory even when OFF has been selected for ECU DATA SAVE.

A shutter speed is set in each POSITION item on this screen. Item Variable range Remarks SYNCHRO SCAN 2 90.0 deg : 180.0 deg : 225.0 deg VF display ENG For selecting the shutter speed which is to be set in SYNCHRO SCAN 2. POSITION 1 SEL (FILM MENU) (CAM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 1. POSITION 2 SEL (FILM MENU) (CAM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 2. POSITION 3 SEL (FILM MENU) (CAM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 3. Item Variable range Remarks VF display POSITION 4 SEL (FILM MENU) (CAM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 4. POSITION 5 SEL (FILM MENU) (CAM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 5. POSITION 6 SEL (FILM MENU) (CAM MENU) 180.0 deg 172.8 deg 144.0 deg 120.0 deg 90.0 deg 45.0 deg 1/100 1/120 1/250 1/500 1/1000 1/2000 ENG For selecting the shutter speed which is to be set in POSITION 6. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

The modes of the camera switches are set on this screen. Item Variable range Remarks FILTER INH ON OFF VF display USER ENG For selecting whether or not the data in the AWB memories (channel A, channel B) is to be held for each filter. ON: Only the channel A and channel B memories (2 memories) regardless of the filter. OFF: The data is held for each of the filters (4a2 = 8 memories). SHOCKLESS AWB OFF NORMAL SLOW FAST USER ENG For selecting the SHOCKLESS AWB setting. “SHOCKLESS AWB” means that the switching of the WHITE BAL switch to A, B or PRST is not accompanied by a shock. FAST (high-speed: approx. 0.5 sec.), NORMAL (normal speed: approx. 1 sec.) or SLOW (slow: approx. 3 sec.) can be set for this effect. COLOR BARS SMPTE FULL BARS USER ENG For selecting the color bar signals. SMPTE: SMPTE color bars FULL BARS: Full color bars S. GAIN OFF S.GAIN L/M/H USER ENG For selecting the method for releasing the super gain mode. S.GAIN: The mode is released by the super gain switch only. L/M/H: The mode is released by changing the L/M/H switch setting. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) When ON has been selected for both GAIN (0 dB) and GAIN (–3 dB), the lamp will light at all gain levels except for –3 dB and 0 dB. ! LED screen The display of the lamp which appears inside the viewfinder is set to ON or OFF on this screen. Item Variable range Remarks GAIN (0 dB) ON OFF VF display USER ENG For setting whether the lamp is to be turned on when the gain level is other than 0 dB. GAIN (–3 dB) ON OFF USER ENG For setting whether the lamp is to be turned on when the gain level is other than –3 dB. SHUTTER ON OFF USER ENG For setting whether the lamp is to be turned on when the shutter is ON. WHITE PRESET ON OFF USER ENG For setting whether the lamp is to be turned on when PRESET is selected as the AWB channel setting. EXTENDER ON OFF USER ENG For setting whether the lamp is to be turned on when the lens has been set to the EXTENDER mode. FILTER ON OFF USER ENG For setting whether the lamp is to be turned on when a filter other than 3200 K is used. BLACK STR ON OFF USER ENG For setting whether the lamp is to be turned on when black stretch has been set to ON. D5600 K (CAM MENU) ON OFF USER ENG For setting whether the lamp is to be turned on when the preset white balance level is 5600 K. MATRIX ON OFF USER ENG For setting whether the lamp is to be turned on when matrix has been set to ON. COLOR CORRECTION ON OFF USER ENG For setting whether the lamp is to be turned on when color correction has been set to ON. FRAME RATE ON OFF USER ENG For setting whether the lamp is to be turned on when the frame rate less than 11 fps is used. DAY LIGHT (FILM MENU) ON OFF USER ENG For setting whether the lamp is to be turned on when the white balance preset value is the daylight type. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E

USER2 SW (CAM MENU) (FILM MENU) INH S.GAIN S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW F.RATE USER ENG For allocating the functions in USER2 button. OWhen B.STR has been selected as this item’s setting, the function for setting the black level gradation compensation to +3 is allocated. OWhen Y GET has been selected as this item’s setting, the function for measuring the output luminance level is allocated. The output luminance level of the area near the center marker in the viewfinder is displayed in percentage units in the middle of the viewfinder screen for approximately 3 seconds. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) Item Variable range Remarks S. BLK LVL OFF –10 –20 –30 VF display USER ENG For setting the super black level. ECU DATA SAVE ON OFF USER ENG ON : The data controlled by the AJ-EC3 extension control unit is stored in the memory. OFF : The data is not stored in the memory. AUTO KNEE SW (FILM MENU) (CAM MENU) ON OFF ON OFF USER ENG For setting whether the AUTO KNEE function is to be made operational when the OUTPUT/AUTO KNEE switch on the side panel has been set to the CAM AUTO KNEE ON position. ON : The AUTO KNEE function is made operational. OFF : The AUTO KNEE function is not made operational. USER1 SW (FILM MENU) (CAM MENU) INH S.GAIN S.IRIS S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW F.RATE USER ENG For allocating the functions in USER1 button. OWhen B.STR has been selected as this item’s setting, the function for setting the black level gradation compensation to +3 is allocated. OWhen Y GET has been selected as this item’s setting, the function for measuring the output luminance level is allocated. The output luminance level of the area near the center marker in the viewfinder is displayed in percentage units in the middle of the viewfinder screen for approximately 3 seconds. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E When the same function has been allocated to both the USER1 button and the USER2 button, please use the USER2 button.

the preset mode. Setting menu screens FILM (CAM) MAIN MENU 2 (continued) SUPER GAIN screen The gain allocated to the SUPER GAIN switch is set on this screen. Item Variable range Remarks S. GAIN VALUE 18dB 24dB 30dB 36dB VF display USER ENG For selecting the gain when the SUPER GAIN switch is pressed. FRAME MODE screen The frame rate is set on this screen. Item Variable range Remarks FRAME RATE RANGE 60-12 60-4 VF display USER ENG For selecting the variable range of the frame rate. 60-12: 60 fps to 12 fps 60-4: 60 fps to 4 fps FRAME RATE (CAM MENU) (FILM MENU) 60 : 24 : 4 USER ENG For setting the frame rate. When “60-12” has been selected as the FRAME RATE RANGE setting, the frame rate cannot be set to 11 fps or below. SCAN REVERSE ON OFF USER ENG This function is for correcting the images when the prime lens is used. ON : The images are corrected (by reversing their top and bottom and their left and right). OFF : The images are not corrected. S C U F E S C U F E S C U F E S C U F E S C U F E USER SW FRAME RATE 60 : 24 : 12 USER ENG For setting the frame rate to be allocated to the USER1 or USER2 button. Using the USER1 or USER2 button to switch the frame rate OOnce the desired frame rate has been set in a USER (USER1 or USER2) button by performing menu operations, subjects can be shot at the set frame rate simply by pressing the USER button. The original frame rate is restored when the USER button is pressed again. OWhile recording is in progress, the frame rate will not be switched even when the USER button is pressed. OWhen the frame rate has been switched using the USER button, the switched rate will not take effect even if one of the synchro scan switches (“+” or “– ”) is pressed after the JOG dial button is pressed.

Item Variable range Remarks VF display CAM CARD R/W SELECT screen The settings for saving (recording) specific menu data on the SD memory card and loading (reading) the data from the card are performed on this screen. Item Variable range Remarks ID READ/WRITE ON OFF VF display USER ENG For setting camera ID saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON : The camera ID is recorded/loaded. OFF : The camera ID is not recorded/loaded. Example: If the CAMERA ID contents are not to be changed when SD memory card data is saved/loaded, select OFF as the ID READ/WRITE setting. CAM MAIN MENU1 LEVEL R/W ON OFF USER ENG For setting FILM (CAM) MAIN MENU 1 (items other than those marked with }) data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON : The data is recorded/loaded. OFF : The data is not recorded/loaded. See page 89 for information on the items marked with }. CAM MAIN MENU1 SW (}) R/W ON OFF USER ENG For setting FILM (CAM) MAIN MENU 1 (items marked with }) data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON : The data is recorded/loaded. OFF : The data is not recorded/loaded. CAM MAIN MENU2 R/W ON OFF USER ENG For setting FILM (CAM) MAIN MENU 2 data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON : The data is recorded/loaded. OFF : The data is not recorded/loaded. CAM MAIN MENU3 R/W ON OFF USER ENG For setting FILM (CAM) MAIN MENU 3 data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON : The data is recorded/loaded. OFF : The data is not recorded/loaded. CAM MAIN MENU4 R/W ON OFF USER ENG For setting FILM (CAM) MAIN MENU 4 data saving/loading when writing data onto the SD memory card or loading data from it to ON or OFF. ON : The data is recorded/loaded. OFF : The data is not recorded/loaded. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 3 CAM CARD READ/WRITE screen The settings for saving (writing) the menu data on the SD memory card, loading (reading) the data from the card, and configuring the card are performed on this screen. Item Variable range Remarks READ == VF display USER ENG For loading the data from the SD memory card. SELECT 1 : 8 USER ENG For selecting the number of the file to be loaded. WRITE == USER ENG For saving the camera’s data on the SD memory card. SELECT 1 : 8 USER ENG For selecting the number of the file to be saved. CARD CONFIG == USER ENG For formatting the SD memory card. TITLE READ == USER ENG For reading the titles given to the data saved on the SD memory card. READ USER DATA == USER ENG For loading the user area data of the camera’s memory. TITLE 1: to TITLE 8: ¢¢¢¢¢¢ ¢¢ USER ENG A title consisting of up to 8 characters can be given to each file. OIWhen the frame frequency setting has been changed, it is necessary to restart the unit by turning the POWER switch to OFF and then to ON again for the setting to be switched. OItem will be saved regardless of the ECU DATA SAVE setting. E F E F E E E E E E E

SD memory card. 108 The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 3 (continued) GENLOCK/IRIS screen The genlock and iris control settings are performed on this screen. Item Variable range Remarks VF display H PHASE COARSE 00 : 15 USER ENG For coarsely adjusting the H phase during genlock. H PHASE FINE 00 : 64 USER ENG For finely adjusting the H phase during genlock. A. IRIS LEVEL 000 : 050 : 100 USER ENG For setting the auto iris target level. The brightness (iris) is controlled using this value. The higher the value selected, the higher the brightness. A. IRIS PEAK/AVE 000 : 050 : 100 USER ENG For setting the ratio between the auto iris peak and average value. The closer the setting is to 0, the greater the tendency toward average control; conversely, the closer the setting is to 100, the greater the tendency toward peak control. A. IRIS MODE NORM1 NORM2 CENTR USER ENG For selecting the auto iris mode. NORM1: The light is measured for the entire screen (except for the edges). NORM2: The light is measured for the entire screen (except for the top part). CENTR: The light is measured in the center area of the screen only. S. IRIS LEVEL 000 : 080 : 100 USER ENG For setting the super iris target level. (Backlight compensation mode) IRIS GAIN CAM LENS USER ENG For setting whether the iris gain is to be adjusted by the camera or lens. IRIS GAIN VALUE 01 : 06 : 10 USER ENG For setting the iris gain adjustment value. S C U F E S C U F E S C U F E S C U F E S C U F E S C U F E LENS FILE screen The lens files are stored into the unit’s internal memory and read from the memory on this screen. The white shading data and flare adjustment data are stored together as a lens file. Item Variable range Remarks READ WRITE == VF display USER ENG For reading the lens files. FILE SELECT 1 : 8 USER ENG For selecting the number of the file to be read or written. RESET ALL == USER ENG For returning all the data from lens files 1 to 8 to the factory setting. TITLE 1: - TITLE 8: ¢¢¢¢¢¢ ¢¢¢¢¢¢ USER ENG For enabling titles each consisting of a maximum of 12 characters to be set for the files. S U F E == USER ENG For writing the lens files. Item Variable range Remarks READ == VF display USER ENG For reading lens files from the SD memory card. CARD FILE SELECT 1 : 8 USER ENG For selecting the number of the file to be read from the SD memory card or written on the SD memory card. TITLE 1: - TITLE 8: ¢¢¢¢¢¢ ¢¢¢¢¢¢ USER ENG For enabling titles each consisting of a maximum of 12 characters to be set for the files. S U F E LENS FILE (CARD R/W) screen The contents of the eight lens files recorded in the internal memory are written on the SD memory card on this screen. Alternatively, the lens files written on the SD memory card are read into the internal memory on this screen. When RESET ALL is executed, the white shading adjustment value and the flare setting value are reset to the factory default values.

The underlining in the variable range column indicates the setting in the preset mode. LENS ADJ screen The lens adjustments are performed on this screen. Item Variable range Remarks F2.8 ADJ ON OFF VF display ENG For outputting the voltage output only when ON is selected as this item’s setting. F16 ADJ ON OFF ENG For outputting the voltage output only when ON is selected as this item’s setting. When using a lens which enables the open limit and close limit of the lens aperture to be adjusted, set “F2.8ADJ” or “F16ADJ” to ON, and repeatedly adjust so that the lens aperture will be set to “F2.8” or “F16.” (This adjustment need not be performed if the lens does not have this adjustment function.)

FILM (CAM) USER MENU SELECT 1, 2 and 3 screens The settings for registering the items (the same as the ones on the FILM or CAM MAIN MENU 1, 2 and 3 screens) allocated to the SUB menus to the SUB MENU screen are performed on this screen. Registration ON (¢) or OFF (≥) is set at the head of each item. Up to 42 camera unit items can be registered. FILM (CAM) USER MENU SELECT 1 screen SUB menu VF display Remarks ROP ENG Index for opening the ROP screen. LOW SETTING ENG Index for opening the LOW SETTING screen. MID SETTING ENG Index for opening the MID SETTING screen. HIGH SETTING ENG Index for opening the HIGH SETTING screen. ADDITIONAL DTL1 ENG Index for opening the ADDITIONAL DTL1 screen. ADDITIONAL DTL2 ENG Index for opening the ADDITIONAL DTL2 screen. SKIN TONE DTL ENG Index for opening the SKIN TONE DTL screen. KNEE/LEVEL ENG Index for opening the KNEE/LEVEL screen. GAMMA ENG Index for opening the GAMMA screen. CAMERA SETTING ENG Index for opening the CAMERA SETTING screen. FILM (CAM) USER MENU SELECT 2 screen SUB menu VF display Remarks VF DISPLAY ENG Index for opening the VF DISPLAY screen. VF MARKER ENG Index for opening the VF MARKER screen. VF INDICATOR ENG Index for opening the VF INDICATOR screen. !LED ENG Index for opening the !LED screen. CAMERA SW MODE ENG Index for opening the CAMERA SW MODE screen. SUPER GAIN ENG Index for opening the SUPER GAIN screen. FRAME MODE ENG Index for opening the FRAME MODE screen. FILM (CAM) USER MENU SELECT 3 screen SUB menu VF display Remarks CAM CARD READ/WRITE ENG Index for opening the CAM CARD READ/WRITE screen. CAM CARD R/W SELECT ENG Index for opening the CARD R/W SELECT screen. GENLOCK/IRIS ENG Index for opening the GENLOCK/IRIS screen. LENS FILE ENG Index for opening the LENS FILE screen. LENS FILE (CARD R/W) ENG Index for opening the LENS FILE (CARD R/W) screen.

The black shading adjustments are performed on this screen. Item Variable range Remarks DETECTION == VF display ENG For execution of the digital shading compensation. CORRECT (DIG) ON OFF ENG For setting the digital shading compensation to ON or OFF. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens FILM (CAM) MAIN MENU 4 (continued) FLARE screen The camera’s flare settings are performed on this screen. Item Variable range Remarks R FLARE 000 : 100 VF display ENG For setting the R channel flare; the preset value differs from one camera to another. G FLARE 000 : 100 ENG For setting the G channel flare; the preset value differs from one camera to another. B FLARE 000 : 100 ENG For setting the B channel flare; the preset value differs from one camera to another. COLORIMETRY screen The luminance signal standard is selected on this screen. Item Variable range Remarks MATRIX SMPTE-274 SMPTE-240 NTSC VF display ENG For selecting the luminance signal standard. INITIALIZE screen The film or camera menu settings are initialized and scene files are saved on this screen. Item Variable range Remarks READ FACTORY DATA == VF display ENG For restoring the film or camera menu data settings to the factory settings. WRITE USER DATA == ENG For saving the user’s own film or camera menu data in the unit’s memory. SCENE SEL 1 : 4 ENG For designating the number of the scene file. READ == ENG For loading the scene file whose SCENE SEL was designated. WRITE == ENG For saving data in the scene file whose SCENE SEL was designated. RESET == ENG For restoring the scene file data settings to the factory settings. TITLE 1 == ENG For setting the title in scene file No.1. TITLE 2 == ENG For setting the title in scene file No.2. TITLE 3 == ENG For setting the title in scene file No.3. TITLE 4 == ENG For setting the title in scene file No.4. OSince SYSTEM FREQ may change as a result of executing the READ FACTORY DATA, turn the power off and then back on again. OItem will be saved regardless of the ECU DATA SAVE setting. E WHITE SHADING screen The white shading adjustments are performed on this screen. Item Variable range Remarks VF display DETECTION (V SAW) == ENG For executing vertical white shading compensation. CORRECT ON OFF ENG For setting the shading compensation to ON or OFF. S C U F E S C U F E E E E F E F E The white shading adjustment value and the flare setting value can be written to the internal memory as a lens file.

the preset mode. Setting menu screens FILM (CAM) MAIN MENU 4 (continued) DIAGNOSTIC screen The usage statuses and software versions are displayed on this screen. Item Variable range Remarks CAMSOFT (IN) == VF display ENG For displaying the version of the software for the built-in flash memory. CAMSOFT (OUT) == ENG For displaying the version of the software for the external flash memory. CAM TABLE == ENG For displaying the version of the gamma table. PLD (CAM) == ENG For displaying the version of the software for the camera system computer. PLD (SHD) == ENG For displaying the version of the software for the shading. SUB menu VF display Remarks S/N ENG Index for opening the S/N measurement screen. MODULATION ENG Index for opening the modulation measurement screen. RESOLUTION ENG Index for opening the resolution measurement screen. SENSITIVITY ENG Index for opening the sensitivity measurement screen. EVALUATION screen The items which are measured for evaluation purposes are set on this screen. (S/N, MODULATION, RESOLUTION, SENSITIVITY) OFor details on how to release ENG SECURITY, consult your nearest service center. OItem will be saved regardless of the ECU DATA SAVE setting. E OPTION screen The engineer menu display is selected on this screen. Item Variable range Remarks ENG SECURITY ON OFF VF display ENG For selecting whether to display the engineer menu. ON : The engineer menu is not displayed. OFF : The engineer menu is displayed. SHD, ABB SW CTRL ON OFF ENG For selecting whether to automatically correct black shading when the AUTO W/B BAL switch is pressed continuously for 8 seconds or more on the ABB side. ON : Black shading is corrected automatically. OFF : Black shading is not corrected automatically. AWB AREA 25% 50% 90% ENG For selecting the white balance search area. AWB & ABB OFFSET ON OFF ENG For setting how gain and pedestal values, which are set on the ROP screen of FILM (CAM) MAIN MENU 1, are to be processed after auto white balance and auto black balance are performed. ON : Settings are added. OFF : The values are reset to zero. CAM MENU SEL VIDEO MENU FILM MENU ENG For setting the unit’s operation mode. VIDEO MENU: The unit is set to the video mode. When VIDEO MENU is selected, the FILM USER MENU and FILM MAIN MENU displays will be changed to CAM USER MENU and CAM MAIN MENU. FILM MENU: The unit is set to the film mode. When setting this item on the AJ-EC3 extension control unit, after switching to this item first, then turn ECU DATA SAVE item ON on the CAM SW MODE screen in FILM (CAM) MAIN MENU2. PLD (FM) == ENG For displaying the version of the software program for the frame memory. U F E U F E U F E U F E C U F E

EVALUATION screen The underlining in the variable range column indicates the setting in the preset mode. OS/N measurement screen The S/N measurements are performed on this screen. Item Variable range Remarks S/N ON VF display ENG For setting the S/N measurement. DETAIL ON OFF ENG For setting the DETAIL to ON or OFF. H-F COMPE. ON OFF ENG For setting the high- frequency compensation to ON or OFF. GAMMA ON OFF ENG For setting the GAMMA to ON or OFF. MATRIX ON OFF ENG For setting the MATRIX to ON or OFF. FLARE ON OFF ENG For setting the FLARE to ON or OFF. M. PED –200 : +140 : +200 ENG For adjusting the master pedestal level. OModulation measurement screen The modulation measurements are performed on this screen. Item Variable range Remarks MODULATION ON VF display ENG For setting the modulation measurement. DETAIL ON OFF ENG For setting the DETAIL to ON or OFF. H-F COMPE. ON OFF ENG For setting the high- frequency compensation to ON or OFF. GAMMA ON OFF ENG For setting the GAMMA to ON or OFF. MATRIX ON OFF ENG For setting the MATRIX to ON or OFF. FLARE ON OFF ENG For setting the FLARE to ON or OFF. M. PED (FILM MENU) (CAM MENU) –200 : +000 : +018 : +200 ENG For adjusting the master pedestal level. OPTION screen Item Variable range Remarks EVF SEL MONO COLOR VF display ENG The EVF terminal video signal will be switched. MONO: Only the Y signal is output to the EVF connecter. COLOR: The Y, Pb, and Pr signals are output to the EVF connecter. Currently there is no viewfinder to support this. SUPER DTL ON OFF ENG For selecting the kind of detail to be provided. ON: A stronger detail than usual is provided. OFF: The same level of detail as usual is provided. OWhen the frame frequency setting has been changed, it is necessary to restart the unit by turning the POWER switch to OFF and then to ON again for the setting to be switched. OWhen MONO has been selected as the EVF SEL item setting, the marker displays are set on the VF MARKER screen of FILM (CAM) MAIN MENU 2. When COLOR has been selected instead, they are set using MONITOR MARKER on the VTR MAIN MENU screen. Furthermore, when COLOR is selected, the EVF ZEBRA and EVF DETAIL functions no longer work. OWhen setting SUPER DTL to ON, please adjust the H.DTL LEVEL, H.DTL FREQ and DTL CLIP values. Also, please adjust the V.DTL LEVEL according to these values. OItem will be saved regardless of the ECU DATA SAVE setting. E SYSTEM FREQ. 59.94Hz 60.00Hz ENG For setting the unit’s frame frequency. U F E U F E U F E The EVALUATION screen items are returned to their default settings as soon as the menu is exited.

OResolution measurement screen The resolution measurements are performed on this screen. Item Variable range Remarks RESOLUTION ON VF display ENG For setting the resolution measurement. DETAIL ON OFF ENG For setting the DETAIL to ON or OFF. H-F COMPE. ON OFF ENG For setting the high- frequency compensation to ON or OFF. GAMMA ON OFF ENG For setting the GAMMA to ON or OFF. MATRIX ON OFF ENG For setting the MATRIX to ON or OFF. FLARE ON OFF ENG For setting the FLARE to ON or OFF. M. PED (FILM MENU) (CAM MENU) –200 : +000 : +018 : +200 ENG For adjusting the master pedestal level. OSensitivity measurement screen The sensitivity measurements are performed on this screen. Item Variable range Remarks SENSITIVITY ON VF display ENG For setting the sensitivity measurement. KNEE ON OFF ENG For setting the KNEE to ON or OFF. W. CLIP ON OFF ENG For setting the white clip to ON or OFF. M. PED (FILM MENU) (CAM MENU) –200 : +000 : +018 : +200 ENG For adjusting the master pedestal level.

SUB menu VF display Remarks FUNCTION ENG Index for opening the FUNCTION screen. BATTERY/ TAPE ENG Index for opening the BATTERY/TAPE screen. BATTERY SETTING ENG Index for opening the BATTERY SETTING screen. VTR VF INDICATOR ENG Index for opening the VTR VF INDICATOR screen. MIC/AUDIO ENG Index for opening the MIC/AUDIO screen. TC/UB ENG Index for opening the TC/UB screen. TIME/DATE ENG Index for opening the TIME/DATE screen. VTR USER MENU SELECT ENG Index for opening the VTR USER MENU SELECT screen. VTR CARD READ/WRITE ENG Index for opening the VTR CARD READ/WRITE screen. VTR INITIALIZE ENG Index for opening the VTR INITIALIZE screen. DIAGNOSTIC ENG Index for opening the VTR DIAGNOSTIC screen. Setting menu screens VTR MENUS

FUNCTION screen The VTR’s functions are set on this screen. Item Variable range Remarks NEWS REC MODE OFF 0.2 : 2.0 VF display USER ENG For selecting the VTR START button acknowledgment time during recording. OFF: The pressing of the VTR START button is acknowledged immediately, recording is stopped, and the unit is set to the REC PAUSE mode. 0.2—2.0: The pressing of the VTR START button is not acknowledged and recording is continued for the time set (in increments of 0.2 sec.). Item Variable range Remarks VF display HUMID OPE ON OFF USER ENG For selecting the VTR operation when condensation has formed. ON : Operation is continued as usual. OFF : Operation of all controls except the POWER switch and EJECT button is inhibited. REC START ALL NORMAL USER ENG For selecting acknowledgement of recording started by the VTR START button. ALL: The start of the recording is acknowledged regardless of the VTR mode. NORMAL: The start of the recording is acknowledged only in the STOP (POWER SAVE) mode and REC PAUSE mode. PAUSE TIMER 10 20 30 60 USER ENG For selecting the amount of time REC PAUSE is to be held. 10/20/30/60: 10, 20, 30 or 60 minutes. RETAKE MODE ON OFF USER ENG Functions for rewinding the tape to the position where recording started. ON : The RETAKE function works. OFF : The RETAKE function does not work. The RETAKE function is set OFF when the unit’s power switch has been set to ON. INTERVAL REC MODE ON ONE SHOT OFF USER ENG For selecting the intermittent recording mode. ON: Intermittent recording is performed. ONE SHOT: Intermittent recording is performed once and then stopped. OFF: Intermittent recording is not performed. Intermittent recording is set OFF when the unit’s power switch has been set to ON. INTERVAL REC TIME 00s10f : 59s29f USER ENG For setting the REC time for intermittent recording. When REC time is set at less than 1 second, the initial recording time will be 1 second. INTERVAL PAUSE TIME 00h00m02s : 23h59m59s USER ENG For setting the REC PAUSE time for intermittent recording. The underlining in the variable range column indicates the setting in the preset mode. C U F C U F C U F C U F C F F C U F C U F C U F C U F C U F ECU REC CHK SW R. REVIEW RETAKE USER ENG For selecting the unit operation when the REC CHK button on the AJ- EC3 extension control unit is pressed. R. REVIEW: Rec review is performed. RETAKE: Retake is performed, then playback. CHARACTER ON SDI MENU STATUS USER ENG For selecting the item to be superimposed on the SDI output signals. MENU: The menu screen is superimposed. STATUS: The menu screen and viewfinder status display are superimposed. Neither of these items will be superimposed when the CHARACTER switch on the side panel is set to OFF. COMPRESSION MODE NORMAL DARK USER ENG For selecting the DVCPRO compression mode. NORMAL: Normal shooting is conducted in this mode. DARK: This modes reduces the distortion in the compressed images which occurs in the dark areas of the images. However, the distortion in the compressed images in other areas may be increased.

tone heard when the battery is near the end of its charge to ON or OFF. BATT NEAR END CANCEL ON OFF USER ENG For switching the function which cancels the warning tone heard when the battery is near the end of its charge to ON or OFF using the MODE switch. BATT END ALARM ON OFF USER ENG For setting the warning tone heard when the battery is at the end of its charge to ON or OFF. BATT REMAIN FULL 100% 70% USER ENG For selecting the battery capacity at which “FULL” is to appear on the LCD display window as the remaining battery display (for all 7 segments to be lighted). TAPE NEAR END ALARM ON OFF USER ENG For setting the warning tone heard when the end of the tape is near to ON or OFF. TAPE NEAR END TIME 3min 2min USER ENG For setting the remaining tape time for which the warning tone is to be heard when the end of the tape is near. TAPE END ALARM ON OFF USER ENG For setting the warning tone heard when the tape has reached its end to ON or OFF. TAPE REMAIN/$ 3min/$ 5min/$ USER ENG For setting the time for one segment of the remaining tape display indicated on the LCD display window. 3min/$ : One segment is set to 3 minutes. 5min/$ : One segment is set to 5 minutes. BATTERY/TAPE screen Select the settings which match the type of battery used on this screen. The warning tone which signals the remaining battery charge and remaining tape and which is heard during shooting can be switched off if they prove to be distracting. Item Variable range Remarks BATTERY SELECT AJ-BP490 AU-BP402 PRO14 TRIM14 TRIM13 DIGITAL14 DIONIC90 DIONIC160 BP-H90 BP-H100 NP-L50 ENDURA50 ENDURA-D BP-L60/90 VF display USER ENG For selecting the type of battery used. AJ-BP490 : AJ-BP490 battery AU-BP402 : AU-BP402 battery PRO14 : Anton/Bauer PRO14 battery TRIM14 : Anton/Bauer TRIM14 battery TRIM13 : Anton/Bauer TRIM13 battery DIGITAL14 : Anton/Bauer DIGITAL battery (14V) DIONIC90 : Anton/Bauer DIONIC90 DIGITAL battery DIONIC160: Anton/Bauer DIONIC160 DIGITAL battery BP-H90 : IDX BP-H90 battery BP-H100 : IDX BP-H100 battery NP-L50 : IDX NP-L50 battery ENDURA50 : IDX ENDURA50 battery ENDURA-D : When mounting the V-mount adapter plate made by IDX to use a digital battery BP-L60/90 : Sony BP- L60/90 battery EXT DC IN SELECT AC-ADPT AJ-BP490 AU-BP402 PRO14 TRIM14 BP-H90 BP-H100 BP-L60/90 USER ENG For selecting the power source to be connected to the DC IN socket. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens VTR MAIN MENU (continued) C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F

1. Either “¢” or “≥” appears in front of each item to indicate whether the item is set to ON or OFF. ¢ : ON ≥: OFF 2. Each time the JOG dial button is pressed, the setting moves in the following sequence: 7 AUTO : The NEAR END voltage value preset in each battery is used. MANUAL : The NEAR END voltage setting for each battery can be changed. 7 7 Item movement NEAR END voltage setting AUTO/MANUAL setting ON/OFF setting BATTERY SETTING screen The type of battery to be used is selected and its settings are performed on this screen. Item Variable range Remarks AJ-BP490 MANUAL AUTO VF display ENG For setting the AJ-BP490 and the PACO HP-90A battery. AU-BP402 MANUAL AUTO ENG For setting the AU-BP402 battery. PRO14 MANUAL AUTO ENG For setting the Anton/Bauer PRO14 battery. TRIM14 MANUAL AUTO ENG For setting the Anton/Bauer TRIM14 battery. TRIM13 MANUAL AUTO ENG For setting the Anton/Bauer TRIM13 battery. DIGITAL14 MANUAL AUTO ENG For setting the Anton/Bauer digital battery (14V). DIONIC90 MANUAL AUTO ENG For setting the Anton/Bauer DIONIC90 digital battery. DIONIC160 MANUAL AUTO ENG For setting the Anton/Bauer DIONIC160 digital battery. BP-H90 MANUAL AUTO ENG For setting the IDX BP- H90 battery. BP-H100 MANUAL AUTO ENG For setting the IDX BP- H100 battery. NP-L50 MANUAL AUTO ENG For setting the IDX NP- L50 battery. ENDURA50 MANUAL AUTO ENG For setting the IDX ENDURA50 battery. ENDURA-D MANUAL AUTO ENG For use when mounting the V-mount adapter plate made by IDX to use a digital battery BP-L60/90 MANUAL AUTO ENG For setting the Sony BP- L60/90 battery. The underlining in the variable range column indicates the setting in the preset mode. MONITOR MARKER screen Using the menu settings on this screen, it is possible to select the display used for the safety zone and other markers for the HD SDI MON connector and also for the EVF connector when COLOR has been selected as the EVF SEL item setting on the OPTION menu from FILM (CAM) MAIN MENU 4. Item Variable range Remarks VF display SAFTY ZONE 16:9 4:3 OFF USER ENG For selecting the safety zone (90%). CENTER MARK ON OFF USER ENG For selecting ON or OFF for the center marker display. FRAME SIG 4:3 14:9 VISTA CNSCO USER ENG For switching the frame marker display. VISTA : 1:1.85 CNSCO: 1:1.235 MARK ON OFF USER ENG For selecting ON or OFF for the frame marker display. Set the marker displays to appear on a regular black-and-white viewfinder on the VF MARKER screen of FILM (CAM) MAIN MENU 2. C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F

The underlining in the variable range column indicates the setting in the preset mode. Item Variable range Remarks VF display SAVE LED SAVE&TAPE SAVE USER ENG For setting the operation of the SAVE lamp. SAVE: This lights when the VTR SAVE/STBY switch has been set to SAVE. It goes off during recording. SAVE&TAPE: This lights when the VTR SAVE/STBY switch has been set to SAVE. It goes off during recording. When the tape is approaching its end, it flashes in tandem with the warning alarm that sounds when tape-end is approaching. VTR VF INDICATOR screen The information to be displayed in the viewfinder is set on this screen. Item Variable range Remarks TAPE (IND) ON OFF VF display USER ENG For switching the remaining tape display to ON or OFF. BATTERY (IND) ON OFF USER ENG For switching the battery voltage display to ON or OFF. LEVEL METER (IND) CH1 CH1•CH2 OFF USER ENG For selecting what the audio level meter is to display. CH1: The level of the CH1 signals only is displayed. CH1•CH2: The levels of both the CH1 and CH2 signals are displayed. OFF: No display. AUDIO IN (IND) ON OFF USER ENG For switching the audio input display to ON or OFF. ON: The audio input is displayed. OFF: The audio input is not displayed. TC (IND) TCG TCR TCG/TCR OFF USER ENG For selecting what the time code is to display. TCG: The time code generated by the time code generator is displayed in the E-E mode. TCR: The time code reader value is displayed in the V-V mode. TCG/TCR: The time code generated by the time code generator is displayed in the E-E mode; the time code reader value is displayed in the V-V mode. OFF: The time code is not displayed. VTR WARNING (IND) ALWAYS NORMAL OFF USER ENG For setting when the VTR’s warnings are to be displayed. ALWAYS: The warning display always appears when a warning has occurred. NORMAL: The display appears for 3 seconds after the warning occurred and for 3 seconds after recording was started or completed. OFF: The warning displays do not appear. MIC/AUDIO screen The MIC/AUDIO settings are performed on this screen. Item Variable range Remarks FRONT MIC POWER ON OFF VF display USER ENG ON : The phantom power is supplied to the front microphone. OFF : The phantom power is not supplied to the front microphone. COMPRESSION (IND) ON OFF USER ENG For setting the compression mode display to ON or OFF. ON: “COMP” appears at the top right when DARK has been selected as the COMPRESSION setting on the FUNCTION screen. OFF: The compression mode is not displayed. C U F C U F C U F C U F C U F C U F C U F C U F C U F

Item Variable range Remarks VF display MIC LOWCUT CH2 FRONT REAR F&R OFF USER ENG For setting the high-pass filter for the CH2 mic input. FRONT:The high-pass filter for the front mic input is set to ON. REAR: The high-pass filter for the rear mic input is set to ON. F&R: The high-pass filters for both the front and rear mic inputs are set to ON. OFF: The high-pass filter for the CH2 input is set to OFF. LIMITER ON OFF USER ENG For switching the audio limiter to ON or OFF. ON : The limiter operates. OFF : The limiter does not operate. TEST TONE NORMAL ALWAYS OFF CHSEL USER ENG NORMAL: The test tone signal is output when the AUDIO IN switch for CH1 is set to front while BAR is selected as the CAM/BAR switch setting. ALWAYS: The test tone signal is always output when BAR is selected as the CAM/BAR switch setting. OFF: The test tone signal is not output. CHSEL: The test tone signal is output for the selected channel when the AUDIO IN switch CH1 or CH2 is set to front while BAR is selected as the CAM/BAR switch setting. CUE SELECT SIDE SW CH1 CH2 MIX USER ENG For setting the audio signals to be recorded on the cue track. SIDE SW: The signals selected by the CUE switch on the side panel are recorded. CH1: The CH1 signals are recorded. CH2: The CH2 signals are recorded. MIX: The CH1 and CH2 mixed signals are recorded. EMBEDDED AUDIO (60 Hz) ON OFF USER ENG For setting whether the embedded audio signals are to be output to the HD SDI MON connector and HD SDI EE connector when 60.00 Hz has been selected as the frame frequency setting. ON : The embedded audio signals are output. OFF : The embedded audio signals are not output. The underlining in the variable range column indicates the setting in the preset mode. The frequency characteristics in the MIC LOWCUT ON mode are 200 Hz to 10 kHz. MIC/AUDIO screen Item Variable range Remarks VF display MIC LOWCUT CH1 FRONT REAR F&R OFF USER ENG For setting the high-pass filter for the CH1 mic input. FRONT:The high-pass filter for the front mic input is set to ON. REAR: The high-pass filter for the rear mic input is set to ON. F&R: The high-pass filters for both the front and rear mic inputs are set to ON. OFF: The high-pass filter for the CH1 input is set to OFF. A/V SYNCHRO ON OFF USER ENG At low frame rates, the images lag behind the sound. This item is used to select whether this lag is to be adjusted. ON: The lag is adjusted so that the timing of the images is more or less in synchronization with the timing of the sound. OFF: The lag is not adjusted. The same operations as in previous models are performed. OWhen ON has been selected as the A/V SYNCHRO item setting, noise may be carried on the audio signals at those moments when the frame rate is switched. OThe timing of the images and the timing of the sound are fixed while recording is in progress. This means that these two timings may not be in synchronization when the frame rate is switched during recoding even when ON has been selected as the A/V SYNCHRO item setting. OAt frame rates of 12P and less, it is not possible for the timing of the images and the timing of the sound to be in synchronization even when ON has been selected as the A/V SYNCHRO item setting. The 12P timing will be fixed. C U F C U F C U F C U F C U F C U F C U F

The time code and user bits settings are performed on this screen. The underlining in the variable range column indicates the setting in the preset mode. TC/UB screen Item Variable range Remarks VF display VITC UB MODE USER DATE TIME EXT TCG USER ENG For setting what is to be written as the user bits in the VITC area. USER : User setting (fixed). DATE : Real time value for year/month/day/ hours. TIME : Real time value for hours/minutes/ seconds. EXT : The UBG value is slave-locked when a TC signal is supplied from an external source. (The user setting is used when no external input is supplied.) TCG : Time code generator value O Set the time on the TIME/DATE menu screen when using the UB MODE item with real-time operation. OThe tape management information is not output as the user bits information in the VITC area. TC DISP SEL 24F 25F 30F USER ENG For setting the number of frames to be displayed per second in the time code frame digits. 24F: 0 to 23 frames will be displayed per second. 25F: 0 to 24 frames will be displayed per second. 30F: 0 to 29 frames will be displayed per second. Item Variable range Remarks VF display P. OFF LCD DISPLAY ON OFF USER ENG For setting whether the LCD display is to appear when the power is OFF. ON : The LCD display appears even when the power is OFF. OFF : The LCD display does not appear when the power is OFF. The power-saving mode is established. TC OUT TCG TCG/TCR USER ENG For selecting the time code which is to be output to the time code output connector. TCG: The time code generated by the time code generator is output at all times. TCG/TCR: The time code generated by the time code generator is output in the E-E mode; the time code reader value is output in the V-V mode. C U F C U F C U F C U F

of the LCD panel drive microcomputer. 123 TIME DATE screen The time/date settings are performed on this screen. Item Variable range Remarks YEAR 00—05—99 VF display ENG For setting the year. MONTH 1 — 12 ENG For setting the month. DAY 1 — 31 ENG For setting the day. HOUR 0 — 23 ENG For setting the hours. MINUTE 0 — 59 ENG For setting the minutes. $ TIME/DATE SET == ENG For entering the time and date. The underlining in the variable range column indicates the setting in the preset mode. Setting menu screens VTR MAIN MENU (continued) SUB menu VF display Remarks FUNCTION ENG Index for opening the FUNCTION screen. BATTERY/TAPE ENG Index for opening the BATTERY/TAPE screen. VTR VF INDICATOR ENG Index for opening the VTR VF INDICATOR screen. MIC/AUDIO ENG Index for opening the MIC/AUDIO screen. TC/UB ENG Index for opening the TC/UB screen. VTR USER MENU SELECT screen This is the index screen for opening the screens containing the items to be registered on the VTR unit’s USER MENU. VTR CARD READ/WRITE screen The settings for saving the menu data onto the SD memory card and loading the data from it are performed on this screen. Item Variable range Remarks READ == VF display ENG For loading the VTR data from the SD memory card. WRITE == ENG For saving the VTR data onto the SD memory card. READ USER DATA == ENG For loading the VTR user area data contained in the unit’s internal memory. VTR INITIALIZE screen The VTR MENU settings are initialized and the user data is saved on this screen. Item Variable range Remarks READ FACTORY DATA == VF display ENG For returning the menu data to the factory settings. WRITE VTR USER DATA == ENG For saving the VTR MENU data inherent to the user into the unit’s memory. DIAGNOSTIC screen The use statuses and software versions are displayed on this screen. Item Variable range Remarks OPERATION == VF display ENG Operating time with power ON. DRUM RUNNING == ENG Number of hours the drum has rotated. THREADING == ENG Number of times tapes have been loaded. VTR SYSCON == ENG For displaying the version of the system microcomputer. SERVO == ENG For displaying the version of the servo microcomputer. MECHACON == ENG For displaying the version of the mechanism control microcomputer. MONITOR MARKER ENG Index for opening the screen (MONITOR MARKER) on which to set the markers for the HD SDI MON connector and color EVF. SDI IF == ENG For displaying the version of the SDI IF FPGA. AUDIO == ENG For displaying the version of the AUDIO FPGA. CODEC == ENG For displaying the version of the CODEC FPGA.

SELECT ¢ ≥ ENG For setting the registration of the EXT DC IN SELECT item on the USER MENU screen. 124 Setting menu screens VTR USER MENU SELECT ON (¢) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU screen. The maximum number of VTR unit items which can be registered is 14. FUNCTION screen Item Variable range Remarks NEWS REC MODE ¢ ≥ VF display ENG For setting the registration of the NEWS REC MODE item on the USER MENU screen. HUMID OPE ¢ ≥ ENG For setting the registration of the HUMID OPE item on the USER MENU screen. REC START ¢ ≥ ENG For setting the registration of the REC START item on the USER MENU screen. PAUSE TIMER ¢ ≥ ENG For setting the registration of the PAUSE TIMER item on the USER MENU screen. RETAKE MODE ¢ ≥ ENG For setting the registration of the RETAKE MODE item on the USER MENU screen. COMPRESSION MODE ¢ ≥ ENG For setting the registration of the COMPRESSION item on the USER MENU screen. INTERVAL REC MODE ¢ ≥ ENG For setting the registration of the INTERVAL REC MODE item on the USER MENU screen. INTERVAL REC TIME ¢ ≥ ENG For setting the registration of the INTERVAL REC TIME item on the USER MENU screen. INTERVAL PAUSE TIME ¢ ≥ ENG For setting the registration of the INTERVAL PAUSE TIME item on the USER MENU screen. ECU REC CHK SW ¢ ≥ ENG For setting the registration of the ECU REC CHK SW item on the USER MENU screen. CHARACTER ON SDI ¢ ≥ ENG For setting the registration of the CHARACTER ON SDI item on the USER MENU screen. BATTERY/TAPE screen Item Variable range Remarks VF display BATT NEAR END ALARM ¢ ≥ ENG For setting the registration of the BATT NEAR END ALARM item on the USER MENU screen. BATT NEAR END CANCEL ¢ ≥ ENG For setting the registration of the BATT NEAR END CANCEL item on the USER MENU screen. BATT END ALARM ¢ ≥ ENG For setting the registration of the BATT END ALARM item on the USER MENU screen. BATT REMAIN FULL ¢ ≥ ENG For setting the registration of the BATT REMAIN FULL item on the USER MENU screen. TAPE NEAR END ALARM ¢ ≥ ENG For setting the registration of the TAPE NEAR END ALARM item on the USER MENU screen. TAPE NEAR END TIME ¢ ≥ ENG For setting the registration of the TAPE NEAR END TIME item on the USER MENU screen. TAPE END ALARM ¢ ≥ ENG For setting the registration of the TAPE END ALARM item on the USER MENU screen. TAPE REMAIN /$ ¢ ≥ ENG For setting the registration of the TAPE REMAIN/$ item on the USER MENU screen. The underlining in the variable range column indicates the setting in the preset mode. C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F BATTERY/TAPE screen Item Variable range Remarks BATTERY SELECT ¢ ≥ VF display ENG For setting the registration of the BATTERY SELECT item on the USER MENU screen. MONITOR MARKER screen Item Variable range Remarks SAFETY ZONE ¢ ≥ VF display ENG For setting the registration of the SAFETY MENU item on the USER MENU screen. CENTER MARK ¢ ≥ ENG For setting the registration of the CENTER MARK item on the USER MENU screen. FRAME SIG ¢ ≥ ENG For setting the registration of the FRAME SIG item on the USER MENU screen. MARK ¢ ≥ ENG For setting the registration of the MARK item on the USER MENU screen.

ON (¢) or OFF (≥) is set on this screen to determine which items are to be registered on the USER MENU screen. The maximum number of VTR unit items which can be registered is 14. The underlining in the variable range column indicates the setting in the preset mode. VTR VF INDICATOR screen Item Variable range Remarks TAPE (IND) ¢ ≥ VF display ENG For setting the registration of the TAPE (VF INDICATOR) item on the USER MENU screen. BATTERY (IND) ¢ ≥ ENG For setting the registration of the BATTERY (VF INDICATOR) item on the USER MENU screen. LEVEL METER (IND) ¢ ≥ ENG For setting the registration of the LVEL METER (VF INDICATOR) item on the USER MENU screen. AUDIO IN (IND) ¢ ≥ ENG For setting the registration of the AUDIO IN (VF INDICATOR) item on the USER MENU screen. TC (IND) ¢ ≥ ENG For setting the registration of the TC (VF INDICATOR) item on the USER MENU screen. VTR WARNING (IND) ¢ ≥ ENG For setting the registration of the VTR WARNING (VF INDICATOR) item on the USER MENU screen. COMPRESSION (IND) ¢ ≥ ENG For setting the registration of the COMPRESSION (VF INDICATOR) item on the USER MENU screen. SAVE LED ¢ ≥ ENG For setting the registration of the SAVE LED item on the USER MENU screen. MIC/AUDIO screen Item Variable range Remarks VF display TEST TONE ¢ ≥ ENG For setting the registration of the TEST TONE item on the USER MENU screen. CUE SELECT ¢ ≥ ENG For setting the registration of the CUE SELECT item on the USER MENU screen. EMBEDDED AUDIO (60Hz) ¢ ≥ ENG For setting the registration of the EMBEDDED AUDIO (60Hz) item on the USER MENU screen. A/V SYNCHRO ¢ ≥ ENG For setting the registration of the A/V SYNCHRO item on the USER MENU screen. MIC/AUDIO screen Item Variable range Remarks FRONT MIC POWER ¢ ≥ VF display ENG For setting the registration of the FRONT MIC POWER item on the USER MENU screen. MIC LOWCUT CH1 ¢ ≥ ENG For setting the registration of the MIC LOWCUT CH1 item on the USER MENU screen. MIC LOWCUT CH2 ¢ ≥ ENG For setting the registration of the MIC LOWCUT CH2 item on the USER MENU screen. TC/UB screen Item Variable range Remarks TC MODE ¢ ≥ VF display ENG For setting the registration of the TC MODE item on the USER MENU screen. UB MODE ¢ ≥ ENG For setting the registration of the UB MODE item on the USER MENU screen. TCG SET HOLD ¢ ≥ ENG For setting the registration of the TCG SET HOLD item on the USER MENU screen. FIRST REC TC ¢ ≥ ENG For setting the registration of the FIRST REC TC item on the USER MENU screen. P.OFF LCD DISPLAY ¢ ≥ ENG For setting the registration of the P.OFF LCD DISPLAY item on the USER MENU screen. TC OUT ¢ ≥ ENG For setting the registration of the TC OUT item on the USER MENU screen. VITC UB MODE ¢ ≥ ENG For setting the registration of the VITC UB MODE item on the USER MENU screen. TC DISP SEL ¢ ≥ ENG For setting the registration of the TC DISP SEL item on the USER MENU screen. LIMITER ¢ ≥ ENG For setting the registration of the LIMITER item on the USER MENU screen. C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F C U F