Genius G12UV Hardware

Game Device Installation 1. Make sure you turn your computer on. 2. Insert the driver’s disc into the CD-ROM drive, and the setup program will start automatically. If not, start the setup program manually by selecting Start/Run and type in “E:\setup”(Where “E:” represents the location of the CD-ROM drive), then press the Enter key. 3. Please follow the instructions on the screen to finish the driver installation. (Some operating systems will install the DirectX program automatically first, so just follow the instructions on the screen to finish the program installation.) 4. After the software installation is completed, you can connect your game device to the USB port on your computer. 5. Click Start / Settings / Control Panel and double click on the “Game Controllers” or “Gaming Options” icon. 6. In the “Game Controllers” or “Gaming Options” screen, you can calibrate and test your game controller before you play any game. 7. When you finish the calibration and test, you can now play any game. Important: 1. The game device has Analog/Digital/Car modes. You can switch to the appropriate mode for use. (Default : Analog mode ) Hardware / Mode Analog mode Digital mode Car mode D-pad POV HAT X & Y axis motion POV HAT Left mini-stick X & Y Axis motion X & Y axis motion X axis motion Right mini-stick Throttle & Rudder Throttle & Rudder Y axis motion LED Indicator Red light Green light Orange light 2. The driver will work with the DirectX 7.0a or a newer version. Please check the DirectX version on your system, and upgrade if necessary. 3. The vibration effect occurs according to game software. For details, refer to the game software manual.