Panasonic CQDF601U - AUTO RADIO/CD DECK Operating Instructions Manual

≥Prière de lire ces instructions attentivement avant d’utiliser Ie produit et garder ce manuel pour l’utilisation ultérieure. ≥Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. Removable Full Front CD Player/Receiver with Dot Matrix LCD and CD Changer Control Lecteur CD/Récepteur avec écran à cristaux liquides par matrice, avec commande de changeur de CD et panneau avant entièrement amovible Reproductor de CD/Receptor con carátula completa desmontable, LCD de matriz de puntos y control de cambiador de CD CQ-DF801/DFX701/DF601U Operating Instructions Manuel d’instructions Manual de instrucciones VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR (CQ-DF801U)

the back or bottom of the unit. Please record them in the space below and retain this booklet as a per- manent record of your purchase to help with identi- fication in case of theft. CQ-DF801U/ MODEL NUMBER CQ-DFX701U/CQ-DF601U SERIAL NUMBER DATE PURCHASED FROM Il est recommandé de noter, dans l’espace prévu ci- dessous, les numéros de modèle et de série inscrits soit à l’arrière soit sous le fond de l’appareil, et de conserver ce manuel comme mémorandum de l’achat afin de per- mettre l’identification de l’appareil en cas de vol. CQ-DF801U/ NUMÉRO DE MODÈLE CQ-DFX701U/CQ-DF601U NUMÉRO DE SÉRIE DATE DE L’ACHAT VENDEUR Busque el número del modelo y el número de serie ya sea en la parte trasera o en el fondo de la unidad. Sírvase anotar dichos números en el espacio siguiente, y man- tenga este librete como una anotación permanente de su compra para ayudar en la identificación en el caso de robo. CQ-DF801U/ NÚMERO DEL MODELO CQ-DFX701U/CQ-DF601U NÚMERO DE SERIE FECHA DE COMPRA NOMBRE DE LA TIENDA C Q - D F 8 0 1 U Model No. N˚ De Modèle Serial No. N˚ De Série Manufactured by Dalian Matsushita Communication Industrial Co., Ltd. Dalian China Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. 15A 12V 4~8 FM75 DISP 3 (CQ-DF801U) Label Indication and Location Safety Information Consignes de sécurité Información para su seguridad CAUTION: THIS PRODUCT IS A CLASS I LASER PROD- UCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. Laser products: Wave length: 780 nm Laser power: No hazardous radiation is emitted with safety protection. ATTENTION : CET APPAREIL EST UN PRODUIT LASER DE LA CLASSE I. L’UTILISATION DE COMMANDES OU RÉGLAGES OU L’EXÉCUTION D’OPÉRATIONS AUTRES QUE CELLES QUI SONT INDIQUÉES DANS CE DOCUMENT PEUVENT RÉSULTER EN UNE EXPOSITION À UN RAYONNEMENT DANGEREUX. N’OUVREZ PAS LES COUVERCLES ET N’ESSAYEZ PAS D’EFFECTUER VOUS-MÊME DES RÉPARATIONS. ADRESSEZ-VOUS À UN PERSONNEL QUALIFIÉ POUR TOUTE RÉPARATION. MISE EN GARDE: POUR RÉDUIRE LES RISQUES D’INCENDIE OU D’ÉLEC- TROCUTION, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU D’INTERFÉRENCES, UTILISER UNIQUEMENT LES COMPOSANTS FOURNIS. Produits laser: Longueur d’onde: 780 nm Puissance du laser: Aucune radiation dangereuse n’est émise avec la protection de sécurité. PRECAUCIÓN: ÉSTE ES UN PRODUCTO LÁSER DE LA CLASE I. LA UTILIZACIÓN DE CONTROLES, EL HACER AJUSTES O EL SEGUIR PROCEDIMIENTOS DISTINTOS DE LOS ESPECIFICADOS EN ESTE MANUAL PODRÍA CAUSAR UNA EXPOSICIÓN PELIGROSA A LA RA- DIACIÓN. NO ABRA LAS CUBIERTAS NI HAGA REPARACIONES USTED MISMO. SOLICITE LOS TRABAJOS DE SERVI- CIO AL PERSONAL CALIFICADO. ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIOS O SACUDIDAS ELÉCTRICAS, NO EXPONGA ESTE PRODUCTO A LA LLUVIA NI A LA HUMEDAD. PARA REDUCIR EL RIESGO DE INCENDIOS O SACUDI- DAS ELÉCTRICAS, Y PARA EVITAR LAS INTERFERENCIAS MOLESTAS, UTILICE SOLAMENTE LOS COMPONENTES INCLUIDOS. Productos láser: Longitud de onda: 780 nm Potencia láser: Con protección de seguridad no se emite radiación peligrosa. §Déclaration d’interférence de fréquences radio (Partie 15 des Règlements FCC): Cet appareil numérique de Classe B est conforme au règlement ICES-003 canadien. Radio Frequency Interference Statement (Part 15 of the FCC Rules): Applies only in U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 of the FCC Rules. ≥These limits are designed to provide reasonable protection against harmful interference in an automo- bile installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in- stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa- tion. If this equipment does cause harmful interference to radio reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experience radio technician for help. FCC Warning: Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. §For Canada: This Class B digital apparatus complies with Canadian ICES-003.

Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod- uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work. Once you discover the quality, reliability, and value we have built into this product, you too will be proud to be a member of our family. When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Car Washing Do not expose the product, including the speakers and CDs, to water or excessive moisture. This could cause electrical shorts, fire, or other damage. When Parked Parking in direct sunlight can produce very high temperatures inside your car. Give the interior a chance to cool down before switching the unit on. DC/DC converter unit (only for CQ-DF801U) The DC/DC converter unit may become hot if the unit is operated at high output continuously. Therefore, do not install this unit near the car heaters or in the enclosed space because of the poor ventilation. Use the Proper Power Supply This product is designed to operate with a 12 V, negative ground battery system (the normal system in a North American car). Disc Mechanism Do not insert coins or any small objects. Keep screwdrivers and other metallic objects away from the disc mechanism and disc. Use Authorized Servicenters Do not attempt to disassemble or adjust this preci- sion product. Please refer to the Servicenter list in- cluding with this product for service assistance. For Installation This product should be installed in a horizontal po- sition with the front end up at a convenient angle, but not more than 30x. ≥Operating instructions .................................... 1 ≥Installation hardware................1 set (➡page 28) ≥Power connector ............................................ 1 ≥Remote control unit ........................................ 1 ≥Lithium battery (CR2025)................................ 1 ≥Warranty card.................................................. 1 ❐Components Panasonic est heureuse de vous compter parmi les utilisateurs de ses appareils électroniques. Nous pouvons vous as- surer que cet appareil vous procurera de longues heures d’agrément. Notre réputation est fondée sur une ingénierie électronique et mécanique de haute précision, laquelle préside à la fabrication d’appareils ne comportant que des com- posants de choix assemblés par un personnel soucieux de la bonne réputation acquise par la qualité de son travail. Après avoir découvert la qualité, la valeur et la fiabilité de cet appareil, vous aussi serez fier d’être un client Panasonic. Source d’alimentation Cet appareil est conçu pour fonctionner sur un système d’alimentation avec batterie de 12 V à masse négative (système standard sur les voitures de construction nord- américaine). Mécanisme de disque N’insérez pas de pièces de monnaie ou de petits objets. Gardez les tournevis et autres objets métalliques à l’écart du mécanisme de disque et du disque. Réparation Ne tentez pas de démonter ou d’ajuster l’appareil vous- même. Veuillez vous référer à la liste des centres de ser- vice fournie avec cet appareil pour contacter le service d’assistance. Installation L’appareil doit être installé en position horizontale avec son extrémité avant inclinée vers le haut à un angle com- mode, mais ne dépassant pas 30x. Au volant Réglez le volume à un niveau qui ne risque pas de mas- quer les bruits ambiants. Lavage de la voiture Afin de prévenir tout risque de court-circuit ou d’in- cendie, n’exposez pas l’équipement, y compris les haut- parleurs et les disques, à l’eau ou à une humidité excessive. Voiture stationnée L’habitacle d’une voiture immobile exposée au soleil toutes vitres fermées devient rapidement très chaud. Laisser rafraîchir l’intérieur du véhicule avant d’utiliser l’appareil. Convertisseur CC/CC (Seulement pour CQ-DF801U) Le convertisseur CC/CC peut se réchauffer quand il est utilisè en continu à une haute puissance. Veiller donc à ne pas installer cet appareil près du chauffage de voiture, ni dans un espace fermé afin d’éviter la mauvaise ventila- tion. ❐Précautions à prendre ≥Manuel d’instructions.............................................. 1 ≥Quincaillerie pour l’installation ..............................................1 ensemble (➡page 64) ≥Connecteur d’alimentation ...................................... 1 ≥Télécommande........................................................ 1 ≥Pile au lithium (CR2025) ........................................ 1 ≥Carte de garantie .................................................... 1 ❐Éléments constitutifs Remarque: ≥Ce manuel a été conçu pour les 3 modèles CQ-DF801U, CQ-DFX701U et CQ-DF601U. Toutes les illustrations du présent manuel mettent en présence le modèle CQ-DF801U à moins d’indication contraire. Le tableau ci-dessous décrit les différences entre les 3 modèles. Modèles Caractéristiques CQ-DF801U CQ-DFX701U CQ-DF601U Puissance de sortie maximale 60 Wa4 canaux 50 Wa4 canaux 50 Wa4 canaux Niveau de sortie préampli 5 V 5 V 2,5 V Impédance de sortie préampli 60 ≠ 60 ≠ 200 ≠ Niveau de sortie d’extrêmes-graves 5 V 5 V 2,5 V Models Features CQ-DF801U CQ-DFX701U CQ-DF601U Maximum power output 60 Wa4 channels 50 Wa4 channels 50 Wa4 channels Pre-Amp output level 5 V 5 V 2.5 V Pre-Amp output impedance 60 ≠ 60 ≠ 200 ≠ Subwoofer output level 5 V 5 V 2.5 V Note: ≥This operating instruction manual is for 3 models CQ-DF801U, CQ-DFX701U and CQ-DF601U. All illustra- tions throughout this manual represent model CQ-DF801U unless otherwise specified. The following table describes the differences between 3 models.

Radio Frequency Interference Statement (Part 15 of the FCC Rules) . . . . . 12 Use this Product Safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ❒Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ❒Remote Control Unit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Battery installation, battery notes ❒General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 How to adjust the volume, setting mute/attenuator, open/close the front panel, setting the S•HDB and dimmer, changing the display ❒Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Manual and automatic tuning, band selection, preset stations, direct memory setting ❒CD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Disc insert and playback, stop and disc eject, pause, track selection, search, repeat, random, scan play ❒CD Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 CD changer mode, disc/track selection, change the CD changer unit, search, repeat, random, scan play ❒Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Bass and treble, balance and fader, subwoofer level, cut-off frequency control ❒Picture (Display) Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Spectrum analyzer (S•A) display pattern, contrast, clock on the mode display, clock adjustment ❒User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Mute/attenuator, excluding AUX-IN from source selection, security function ❒Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Step-by-step procedures ❒Anti-Theft System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Place the removable face plate into case, install removable face plate, security indicator, panel removal alarm ❒Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Cautions, wiring diagram, upgrading the system ❒Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Where to get service help, troubleshooting tips, error display messages ❒Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Care of the unit, notes on CD ❒Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 FM Panasonic le da la bienvenida a la familia constantemente en aumento de poseedores de productos electrónicos. Nos esforzamos en proporcionarle las ventajas de la ingeniería mecánica y electrónica de precisión, de una fabricación con componentes cuidadosamente seleccionados, y de un montaje realizado por personas orgullosas de la reputación que su trabajo ha cimentado para nuestra empresa. Estamos seguros de que este producto le proporcionará muchas horas de distracción y, una vez comprobada la calidad, el valor y la fiabilidad incorporados, usted también se sentirá orgul- loso de pertenecer a nuestra familia. Cuando conduzca Mantenga el nivel del volumen suficientemente bajo para estar atento a la carretera y a las condiciones del tráfico. Cuando lave el automóvil No exponga el equipo, incluyendo los altavoces y los CDs, al agua o a una humedad excesiva. Esto puede causar cortocircuitos eléctricos, incendios u otros daños. Cuando esté estacionado El estacionamiento a la luz solar directa puede producir temperaturas muy altas en el interior de su vehículo. Procure enfriar el interior antes de encender la unidad. La unidad del convertidor de CC-CC (Sólo para CQ-DF801U) La unidad del convertidor de CC-CC puede calentarse si se opera continuamente a alta salida. Por lo tanto, no in- stale esta unidad cerca de calefactores de automóvil ni en lugares cerrados porque no se consigue una ventilación adecuada. Uso de la alimentación apropiada Este equipo ha sido diseñado para funcionar con un sis- tema de batería de 12 V con negativo a masa (el sistema normal en un vehículo norteamericano). Mecanismo de disco No inserte monedas ni ningún objeto pequeño. Mantenga los destornilladores u otros objetos metálicos apartados del mecanismo de disco y del disco. Uso de los centros de servicio autoriza- dos No intente desmontar ni ajustar este equipo de precisión. Consulte la lista de centros de servicio incluidos con este producto para acudir a ellos cuando sea necesario. Instalación La unidad deberá instalarse en posición horizontal, con el extremo delantero hacia arriba formando un ángulo con- veniente, pero con no más de 30x. ❐Uso de este equipo con seguridad ≥Manual de instrucciones.......................................... 1 ≥Accesorios suministrados ......1 juego (➡página 100) ≥Conector de alimentación........................................ 1 ≥Unidad del controlador remoto................................ 1 ≥Pila de litio (CR2025) .............................................. 1 ≥Tarjeta de garantía .................................................. 1 ❐Componentes Nota: ≥Este manual de instrucciones de operación serve para 3 modelos CQ-DF801U, CQ-DFX701U y CQ-DF601U. Todas las ilustraciones de este manual representan el modelo CQ-DF801U, a menos que se especifique lo contrario. La tabla siguiente muestra las diferencias entre los 3 modelos. Modelo Características CQ-DF801U CQ-DFX701U CQ-DF601U Salida màxima de potencia 60 Wa4 canales 50 Wa4 canales 50 Wa4 canales Nivel de salida del preamplificador 5 V 5 V 2,5 V Impedancia de salida del preamplificador 60 ≠ 60 ≠ 200 ≠ Nivel de salida de altavoz de graves secundarios 5 V 5 V 2,5 V

FM FM Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Précautions à prendre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Éléments constitutifs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ❒Caractéristiques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ❒Préparation de la télécommande. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Mise en place des piles, remarques sur les piles ❒Généralités . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Régler le volume, réglage de silencieux/atténuateur, ouvrir/fermer le panneau avant, réglage de S•HDB et de gradateur, changement de l’affichage ❒Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Syntonisation manuelle et automatique, sélection de bande, stations présyntonisées, réglage de mémoire directe ❒Lecteur CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Insertion et lecture de disque, arrêt et éjection de disque, pause, sélection de plage, recherche, lecture répétée, lecture aléatoire, lecture des débuts de plage ❒Changeur CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Mode de changeur CD, sélection de disque/plage, changer de changeur CD, recherche, lecture répétée, lecture aléatoire, lecture des débuts de plage ❒Réglages audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Graves et aigus, balance et équilibrage, niveau de haut-parleur d’extrêmes-graves, commande de fréquence de coupure ❒Réglages d’image (Affichage) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Type d'affichage de l'analyseur de spectre, contraste, horloge en mode d'affichage, réglage de l'horloge ❒Réglages d’utilisateur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Silencieux/atténuateur, exclusion d’AUX-IN de la sélection de source, fonction de sécurité ❒Guide d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Procédure étape par étape ❒Système antivol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Placez le panneau avant amovible dans l’étui de rangement, installez le panneau avant amovible, voyant du système de sécurité, alarme de retrait du panneau ❒Branchements électriques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Attention, schéma de câblage, système évolutif ❒En cas de difficulté . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Où obtenir du service après-vente, conseils de dépannage, messages d’erreur ❒Entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Soins à apporter à l’appareil, remarques sur les CD ❒Données techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Información para su seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 3 Uso de este equipo con seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 ❒Características . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 ❒Preparación del controlador remoto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Instalación de las pilas, notas acerca de las pilas ❒Generalidades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Cómo ajustar el volumen, ajuste de silenciamiento/atenuador, abertura/cierre del panel delantero, ajuste del S•HDB y del regulador de intensidad de luz, cambio de visualización ❒Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Sintonización manual y automática, selección de banda, presintonización de emisoras, ajuste directo en memoria ❒Reproductor CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Inserción y reproducción de discos, parada y expulsión de discos, pausa, selección de pistas, reproducción con búsqueda, repetición de reproducción, reproducción aleatoria, reproducción con exploración ❒Cambiador CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Modo de cambiador CD, selección de disco/pista, cambio de cambiador CD, reproducción con búsqueda, repetición de reproducción, reproducción aleatoria, reproducción con exploración ❒Ajustes de audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Graves y agudos, equilibrio y desvanecimiento, nivel de altavoz de subgraves, control de frecuencia de corte ❒Ajustes de imagen (Visualizador) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Patrón de visualización de analizador de espectro, contraste, reloj en el modo de visualización, ajuste de reloj ❒Ajustes del usuario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Silenciamiento/atenuador, exclusión de AUX-IN de la selección de fuente, función de seguridad ❒Guía de instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Procedimientos paso a paso ❒Sistema antirrobo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Colocación de la carátula desmontable en la caja, instalación de la carátula desmontable, indicador de seguridad, alarma de extracción del panel ❒Conexiones eléctricas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Precauciones, diagrama de cableado, mejora del sistema ❒Solución de problemas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Dónde obtener ayuda, consejos para solucionar averías, mensajes de visualización de error ❒Mantenimiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 Cuidados de la unidad, notas acerca de los CD ❒Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

E N G L I S H 1 CQ-DF801/DFX701/DF601U 10 Features Full-dot colorful expressiveness <3D dot matrix display> You can select an operation quickly because operation items are shown on the display. You can also enjoy vari- ety of actions and direction. Audio control functions ≥S•HDB (Super High Definition Bass) (➡page 14) ≥CD changer control (➡page 20) Anti-theft removable face You can remove the face plate when you leave your car. (➡page 33) You can operate this unit by pressing buttons on the main unit and the remote control. ∫These instructions describe buttons that are concerned with operations as follows. Example: Press [P. SET "] or [P. SET #]/["] or [#]. ∫Some operations can be activated by pressing buttons only on main unit or remote control. Those cases are described in the instructions. Example: Press [D•M] on the main unit to select the preset station. Battery Installation Remove the battery holder. Pull the holder by the position B while pushing posi- tion A in the direction indicated by the arrow. Install the battery on the battery holder. Set a new battery properly with its (i) side facing up as shown in the figure. Insert the battery holder. Push in the battery holder back into its original posi- tion. Battery Notes Remove and dispose of an old battery immediately. Battery Information: ≥Battery type: Panasonic lithium battery (CR2025) (included) ≥Battery life: Approximately 6 months with normal use (at room temperature) Back side Lithium battery (included) Battery holder Position A Position B ≥Do not disassemble or short the battery. Do not throw a battery into a fire. ≥Keep batteries away from children to avoid the risk of accidents. ≥Be careful to the local disposal rules when you dispose of batteries. Caution: ≥Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire. Battery leakage may damage the unit. Before Reading these Instructions [buttons on the main unit]/[remote control] 1 2 3 VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR Point the remote control unit at the main unit’s sensor (REMOTE).

OFF: Press again. Decreasing volume range depends on setting. (➡page 26) Note: ≥When the power is switched on for the first time, a demonstration message appears on the display. To cancel this display, press [DISP]. Volume [" VOL]: Up [# VOL]: Down Setting range: 0 to 40 ACC ON Open/Close the Front Panel OPEN: Press [OPEN] on the front panel. CLOSE: Raise the panel by hand. : No sound. Cautions: ≥To avoid damaging the front panel, do not push it down or place objects on it while it is open. ≥Do not pitch your finger or hand in the front panel. ≥Do not insert foreign matter into the disc slot. VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR Radio CD player CD changer control (When a CD is inserted.) (When a CD changer is connected and magazine is in the changer.) Source AUX-IN setting (When AUX-IN setting is activated.) ( page 26) [MUTE] [SOURCE] (POWER) [VOL "] [VOL #] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND Power Turn the key in the ignition until the accessory indicator lights. ON: Press [SOURCE] (PWR). OFF: Press [SOURCE] (PWR) again for more than 1 second. ≥After turning off the ignition key, a security message is displayed, and the panel remov- able alarm that reminds you to take the panel is activated. (When S-LED is set to ON ➡page 26) 1 Source Press [SOURCE] to change the source. 2 VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR < Note: ≥The sound level for each source is stored in memory. (For radio, one volume setting for AM, one volume setting for all FMs) : Decrease the volume to 1/10 . Close

Press [DISP]. Notes: ≥Set the spectrum analyzer pattern in a separate procedure. (➡page 24) ≥ : Displays before adjusting the clock. (➡page 24) Press and hold [DISP] for more than 2 seconds. ≥The audio indicator is displayed for 15 seconds and returns to the pre- vious display. ≥When the indicator lights, the audio function (S•HDB/SUB•W) is now activated. Press [DISP] again to cancel. Display and light off (when it is turned on.) If you press a button, the light is turned on, the mode display appears for 5 seconds, and the light is turned off again. When Power is OFF Press [DISP]. Mode display Mode and spectrum analyzer display Mode and clock display Clock display Display and light off S•HDB (Super High Definition Bass) Especially for rock music, the bass-sound will be more powerful. Press [S•HDB] on the main unit to change the Super High Definition Bass on. Dimmer (Display Brightness Setting Range) Press [DIM] on the main unit to change the dimmer level. VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [DISP] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND : Default : The bass sounds of the speakers are strongly emphasized. : The bass sounds of the speakers are moderately emphasized. (The sounds of the subwoofer can be heard clearly.) : Bright Default : Medium : Dark Spectrum analyzer display If you press a button, the mode and spectrum analyzer display appear for 5 seconds. Note: ≥When S•HDB is on, the indicator (S•HDB BOOM or TIGHT) is shown on the audio indicator display. (➡page 15)

2 Radio Mode Press [SOURCE] to change to the radio mode. 1 Tuning [TUNE $]/[$]: Up [TUNE %]/[%]: Down Press and hold [TUNE $] or [TUNE %]/[$] or [%] for more than 0.5 seconds, then release. Seeking will start. 3 One-Touch Selection of a Preset Station Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories. Manual Preset Memory Manually save a sta- tion in the preset memory Entering Numbers Directly from the Remote Control Select a band and frequency (step 1, 2 and 3 on the previous page). Press and hold [1] to [6] on the remote control for more than 2 sec- onds to memorize. 1 2 3 Auto Preset Memory (APM) Automatically save strong stations in the preset memory Select a band (steps 1 and 2 on the previous page). Press and hold [BAND] (APM) for more than 2 seconds. Note: ≥New stations are overwritten on existing saved stations after following this procedure. Preset Station Calling Select a band (steps 1 and 2 on the previous page). Press [P. SET "] or [P. SET #]/["] or [#] to select the preset number for tuning in the preset station. Entering Numbers Directly from the Remote Control Press [1] to [6] on the remote control. VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [SOURCE] [%] [$] (TUNE) [1] to [6] Preset button [BAND] ["] [#] (PRESET MEMORY) (SELECT) SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND FM1 FM2 FM3 Source AM Note: ≥Frequency setting can be performed even after selecting a preset num- ber. Select a band and frequency (steps 1, 2 and 3 on the previous page). Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than 2 seconds until the preset number blinks. Press [P. SET "] or [P. SET #]/["] or [#] to select a preset num- ber. Press and hold [P. SET "] or [P. SET #]/["] or [#] for more than 2 seconds to memorize. Direct Memory Your favorite radio station can be memorized in [D•M] on the main unit. Default: FM 87.9 MHz Memorize Recalling the Direct Memory Select a band and frequency (steps 1, 2 and 3). Press and hold [D•M] for more than 2 sec- onds. Frequency blinks once and is saved in the memory. Press [D•M]. 1 2 Scanning: Radio mode display Press [D•M] again to cancel and return to the pre- vious source. Note: ≥You can recall the direct memory when the power is off. FM stereo indicator 1 2 ≥The display blinks once, and a re- ceiving station is saved in the memory. Preset number ≥The 6 strongest available stations will be automatically saved in the memory under preset number 1 to 6. ≥Once set, the preset stations are sequentially scanned for 5 seconds each. ≥Press [P. SET "] or [P. SET #]/["] or [#] for the broadcast you want to listen to. (Press [1] to [6] on the remote control.) 1 2 1 2 4 Note: ≥The new station is overwritten on existing saved stations after following this procedure.

: Cancel CQ-DF801/DFX701/DF601U 19 E N G L I S H 9 CQ-DF801/DFX701/DF601U 18 CD Player Notes: ≥ Do not insert a disc when this indicator lights. ≥Loading a CD when the power is off allows the power to be turned on. ≥Ejecting the CD when the unit is in the CD player mode allows the power to be turned off. Track Selection [TRACK 5]/[$]: Next track. [TRACK 6]/[%]: Beginning of the current track. Previous track (Press twice.) CD Player Mode Press [SOURCE] to change to CD player mode and playback starts. Open the front panel. Press [OPEN] on the front panel. 1 Insert the disc. Close the front panel manually. Playback will start automatically. 2 Pause Press [BAND] ([ [ /1) during CD playing. Press [BAND] ([ [ /1) again to cancel. Cautions: ≥Only 5z (12 cm) CD is available for this unit. ≥To avoid damaging the front panel, do not push it down or place objects on it while it is open. ≥Do not use irregularly shaped CDs (heart-shaped, octagon, etc.). ≥Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the disc slot. Menu Setting on CD Player Mode Press [MENU]/[SEL] (MENU) during CD playing. Press [P. SET "] or [P. SET #]/["] or [#] to select a submenu. Press [BAND] (SET) to change the setting. 1 2 3 Notes: ≥Operations except setting should be performed after returning to the mode display. ≥The display returns to the previous one with no operation for 15 seconds after changing to the menu display. ≥Press [DISP] to return to the regular mode. Play Setting Random Play Select RAND : All the available tracks plays in a random se- quence. : Cancel Scan Play Select SCAN : The first 10 seconds of each track plays in sequence. : Cancel Repeat Play Select REP Direct setting on the remote control when the menu is not displayed: ON OFF ON OFF SOURCE D•M Q-DF801U OPEN DISP MOSFET 60WX4 PWR [DISP] VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [5] (SCAN) [%] [$] (TRACK) [4] (RAND) [BAND] ["] [#] (MENU SELECT) [6] (REP) [SEL] (MENU) [DISP] [SOURCE] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND Listening to a CD Disc Insert and Playback Stop and Disc Eject Press [<] (EJECT) to stop CD play and eject the disc. Random Play Press [4] (RAND). Press again to cancel. Scan Play Press [5] (SCAN). Press again to cancel. Repeat Play Press [6] (REP). Press again to cancel. ON OFF < (EJECT) < Label side Close CD player mode display CD player menu display ≥Lights when the disc is loaded. ≥Blinks when the disc is played. Play setting Track Search Press and hold. [TRACK 5]/[$]: Fast forward [TRACK 6]/[%]: Fast backward Release to resume the regular play. When CD is in the player Press [SOURCE] to change to CD player mode.

shaped, octagon, etc.). CD changer functions are designed for optional Panasonic CD changer unit. Preparation: ≥Connect the CD changer, and load a magazine (disc). Notes: ≥Loading a magazine when the power is off allows the power to be turned on. ≥Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off. ≥Pausing does not function in the CD changer mode. Track Selection [TRACK 5]/[$]: Next track. [TRACK 6]/[%]: Beginning of the current track. Previous track (Press twice.) Track Search Press and hold. [TRACK 5]/[$]: Fast forward [TRACK 6]/[%]: Fast backward Release to resume the regular play. CD Changer Mode Press [SOURCE] to change to CD changer mode and playback starts. Note: ≥ : Load a magazine with CDs. 1 Disc Selection [DISC "]/["]: Next disc. [DISC #]/[#]: Previous disc. Menu Setting on CD Changer Mode Press [MENU]/[SEL] (MENU) during CD changer playing. Press [P. SET "] or [P. SET #]/["] or [#] to select a submenu. Press [BAND] (SET) to change the setting. 1 2 3 Notes: ≥Operations except setting should be performed after returning to the mode display. ≥The display returns to the previous one with no operation for 15 seconds after changing to the menu display. ≥Press [DISP] to return to the regular mode. Play Setting Random Play Select RAND : All the available tracks on all discs in the maga- zine plays in a random sequence. : Cancel Select D•RAND : All the available tracks on the current disc plays in a random sequence. : Cancel Scan Play Select SCAN : The first 10 seconds of each track on the discs plays in sequence. : Cancel Select D•SCAN : The first 10 seconds of the first track of all the discs in the magazine plays in sequence. : Cancel Repeat Play Select REP : Repeat the current track. : Cancel Select D•REP : Repeat the current disc. : Cancel Direct setting on the remote control when the menu is not displayed: ON OFF ON OFF ON OFF ON OFF ON OFF Change the CD Changer Unit Press [BAND] (CH•C !@) to select the CD chang- er 1 or 2 mode. CD-CH1: CD changer 1 mode CD-CH2: CD changer 2 mode [DISP] VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [5] (SCAN) [%] [$] (TRACK) [4] (RAND) [BAND] ["] [#] (DISC/MENU SELECT) [6] (REP) [SEL] (MENU) [DISP] [SOURCE] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND Random Play Press [4] (RAND). Press again to cancel. Disc Random Play Press and hold [4] (RAND). Press and hold again to cancel. Scan Play Press [5] (SCAN). Press again to cancel. Disc Scan Play Press and hold [5] (SCAN). Press and hold again to cancel. Repeat Play Press [6] (REP). Press again to cancel. Disc Repeat Play Press and hold [6] (REP). Press and hold again to cancel. ON OFF CD changer menu display CD changer mode display 2 Play setting ≥Lights when the changer (maga- zine) is connected. ≥Blinks when the disc is played.

You can adjust the bass and treble sound. Default: BAS (Bass) 0 dB TRE (Treble) 0 dB Setting range: j12 dB to i12 dB by 3 dB step Subwoofer Level When the subwoofer is activated, you can change the subwoofer volume level. Default: 4 Setting range: 0 (MUTE) to 8 Cut-off Frequency Control The maximum lower frequency level can be adjusted to match your subwoofer and the acoustics inside your car. Default: 120 Hz Setting range: 120 Hz/80 Hz Press [MENU]/ [SEL] (MENU) to select “AUDIO” on the menu display. Press [P. SET "] or [P. SET #]/["] or [#] to select Press [BAND] (SET) to set. BAS/TRE Press [P. SET "] or [P. SET #]/["] or [#] to select Press [BAND] (SET) to set. BAL/FAD Press [P. SET "] or [P. SET #]/["] or [#] to select Press [BAND] (SET) to set. SUB WOOFER Notes: ≥Operations except setting should be performed after returning to the mode display. ≥The display returns to the previous one with no op- eration for 15 seconds after changing to the menu display. ≥Press [DISP] to return to the regular mode. BAS (Bass) TRE (Treble) [P. SET "]/["]: Increase the bass. [P. SET #]/[#]: Decreases the bass. [P. SET "]/["]: Increases the treble. [P. SET #]/[#]: Decreases the treble. BAL (Balance) FAD (Fader) [TUNE $]/[$]: Right enhanced. [TUNE %]/[%]: Left enhanced. [P. SET "]/["]: Front enhanced. [P. SET #]/[#]: Rear enhanced. Press [BAND] (SET) to set. Press [BAND] (SET) to set. VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [BAND] (SET) [TUNE %] [TUNE $] (BAS/TRE/BAL/FAD/ LEVEL/LPF) [P.SET "] [P.SET #] (MENU SELECT) [MENU] [DISP] [%] [$] (BAS/TRE/BAL/ FAD/LEVEL/LPF) [BAND] (SET) ["] [#] (MENU SELECT) [SEL] (MENU) [DISP] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND Balance and Fader You can adjust the sound balance among the front, rear, right and left speakers. Default: BAL (Balance) Center FAD (Fader) Center Setting range: 15 levels each Press [TUNE $] or [TUNE %]/[$] or [%] to select BAS or TRE. LEVEL LPF [TUNE $]/[$]: Increase the level. [TUNE %]/[%]: Decrease the level. Press [TUNE $] or [TUNE %]/[$] or [%] to select 120 Hz or 80 Hz. Press [BAND] (SET) to set. Press [BAND] (SET) to set. Press [P. SET "] or [P. SET #]/["] or [#] to select LEVEL or LPF. 1 2 3 Audio menu display Menu Submenu Setting Regular mode display AUDIO PICTURE FUNCTION Note: ≥When subwoofer level is set 0, the indicator (SUB•W) is not shown on the audio indicator display. (➡page 15)

[P. SET #]/["] or [#] to select CLOCK-ON CQ-DF801/DFX701/DF601U 25 E N G L I S H 15 CQ-DF801/DFX701/DF601U 24 Picture (Display) Settings Spectrum Analyzer (S•A) Display Pattern Default: Pattern A Variety: 6 types Contrast Allows you to adjust the display contrasts for better viewing. Default: Level 3 Setting range: Level 1 to level 5 Clock on the Mode Display Default: ON (“jj:jj” will appear before adjusting the clock.) Clock Adjustment (12 hour system) Default: Not adjusted. Press [MENU]/ [SEL] (MENU) to select “PICTURE” on the menu display. Press [P. SET "] or [P. SET #]/["] or [#] to select Press [BAND] (SET) to set. S•A PATTERN Press [P. SET "] or [P. SET #]/["] or [#] to select Press [BAND] (SET) to set. CONTRAST Press [P. SET "] or [P. SET #]/["] or [#] to select Press [BAND] (SET) to set. CLOCK ADJ Press [TUNE $] or [TUNE %]/[$] or [%] to select the pattern. [TUNE $]/[$]: level up [TUNE %]/[%]: level down A B : Display showing a cube that continues to change : Display showing a globe that continues to change : Display showing a flower or doll pattern Press [BAND] (SET) to set. Note: ≥Change the display to show the spectrum analyzer display. (➡page 15) C D : Display showing a bird flapping its wings : Display showing the image of a circuit : Standard spectrum analyzer display (9 bands) ON OFF : Clock display ON : Clock display OFF Hour/Minute Switch Hour/Minute Adjustment [TUNE %]/[%]: The hour display highlights. [TUNE $]/[$]: The minutes display highlights. Press [BAND] (SET) to set. [P. SET "]/["]: Put forward hour/minute. [P. SET #]/[#]: Put back hour/minute. Notes: ≥Operations except setting should be performed after returning to the mode display. ≥The display returns to the previous one with no op- eration for 15 seconds after changing to the menu display. ≥Press [DISP] to return to the regular mode. VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [BAND] (SET) [TUNE %] [TUNE $] (S A PATTERN/ CONTRAST/CLOCK ADJ) [P.SET "] [P.SET #] (MENU SELECT/CLOCK ADJ) [MENU] [DISP] • [%] [$] [BAND] (SET) ["] [#] (MENU SELECT/ CLOCK ADJ) [SEL] (MENU) [DISP] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND (S A PATTERN/ CONTRAST/ CLOCK ADJ) • Press [BAND] (SET) to set. Display menu display E STD CLOCK-OFF Clock display 1 Menu 2 Submenu 3 Setting Regular mode display AUDIO PICTURE FUNCTION Press [BAND] (SET) to select

volume when [MUTE] is pressed. Default: MUTE Excluding AUX-IN from Source Selection Default: ON Security Function Default: ON Press [MENU]/ [SEL] (MENU) to select “FUNCTION” on the menu display. Press [P. SET "] or [P. SET #]/["] or [#] to select MUTE KEY Press [P. SET "] or [P. SET #]/["] or [#] to select AUX-IN Press [P. SET "] or [P. SET #]/["] or [#] to select S-LED Press [BAND] (SET) to switch between MUTE (mute) or ATT (attenuator) in turn. MUTE ATT : No sound. : Decrease the volume to 1/10. Press [BAND] (SET) to activate the function or inactivate it in turn. ON OFF : External input (AUX-IN) is selectable as a source. : External input (AUX-IN) is not selectable as a source. With AUX-IN set to OFF, AUX-IN will not be selected when [SOURCE] is pressed. (➡page 12) Press [BAND] (SET) to activate the function or inactivate it in turn. ON OFF : Security function is active. : Security function is non-active. Security Function When the key in the ignition is turned OFF. ≥Security message will be active. ≥The panel removable alarm will be active. When the removable face plate is removed. ≥The security indicator blinks. (➡page 33) Notes: ≥Operations except setting should be performed after returning to the mode display. ≥The display returns to the previous one with no op- eration for 15 seconds after changing to the menu display. ≥Press [DISP] to return to the regular mode. VOL MENU TUNE SOURCE D•M CQ-DF801U CD RECEIVER WIITH FULL DOT MATRIX DISPLAY DIM OPEN TRACK DISC P•SET BAND REMOTE SET/APM MUTE DISP CH•C !@ MOSFET 60WX4 S•HDB HDB ; / 1 PWR [BAND] (SET) [P.SET "] [P.SET #] (MENU SELECT) [MENU] [DISP] [BAND] (SET) ["] [#] (MENU SELECT) [SEL] (MENU) [DISP] SEL Car Audio SOURCE POWER VOL MENU DISP MUTE 2 4 6 RAND REP 1 3 5 SCAN BAND Function menu display Security message display 1 Menu 2 Submenu 3 Setting Regular mode display AUDIO PICTURE FUNCTION

tended for non-technical individuals. It does not contain warnings or cautions of po- tential dangers involved in attempting to install this product. Any attempt to install this product in a motor car by anyone other than qualified in- staller could cause damage to the electrical system and could result in serious per- sonal injury or death. ❐Installation Hardware If you encounter problems, please consult your nearest professional installer. 6 7 8 Mounting collar Hex. nut (5 mm·) Rear support strap Tapping screw (5 mm·a16 mm) Mounting bolt (5 mm·) Power connector Removable face plate case Trim plate 1 2 3 4 5 ❐Overview 12 V DC Test bulb Electrical tape Side-cut pliers ❐Required Tools You’ll need a screwdriver, a 1.5 V AA battery, and the following: ❐Dashboard Specifications Thickness Min. 3⁄16z (4.75 mm) Max. 7⁄32z (5.56 mm) 23⁄32z (53 mm) 75⁄32z (182 mm) This product should be installed by a professional. However, if you plan to install this product yourself, your first step is to decide where to install it. The instructions in these pages will guide you through the remaining steps: (Please refer to the “WARNING” statement above.) ≥Identify and label the car wires. ≥Connect the car wires to the wires of the power connector. ≥Install the unit in the dashboard. ≥Check the operation of the unit. Caution: ≥This unit operates with a 12 V DC negative ground auto battery system only. Do not at- tempt to use it in any other system. Doing so could cause serious damage. Before you begin installation, look for the items which are packed with your unit. ≥Warranty Card…Fill this out promptly. ≥Panasonic Servicenter for Service Directory …Keep for future reference in case the product needs servicing. ≥Installation Hardware…Needed for in-dash in- stallation. The first step in installation is to identify all the car wires you’ll use when hooking up your sound sys- tem. As you identify each wire, we suggest that you label it using masking tape and a permanent marker. This will help avoid confusion when making con- nections later. Note: ≥Do not connect the power connector to the stereo unit until you have made all connections. If there are no plastic caps on the stereo hooking wires, insulate all exposed leads with electrical tape until you are ready to use them. Identify the leads in the following order. Power Lead If your car has a radio or is pre-wired for one: Cut the connector wires one at a time from the plug (leaving the leads as long as possible) so that you can work with individual leads. ❐Identify All Leads Turn the ignition on to the accessory position, and ground one lead of the test bulb to the chassis. Touch the other lead of the test bulb to each of the exposed wires from the cut radio connector plug. Touch one wire at a time until you find the outlet that causes the test bulb to light. Now turn the ignition off and then on. If the bulb also turns off and on, that outlet is the car power lead. If your car is not wired for an audio unit: Go to the fuse block and find the fuse port for radio (RADIO), accessory (ACC), or ignition (IGN). Battery Lead If your stereo unit has a yellow lead, you will need to locate the car’s battery lead. Otherwise you may ignore this procedure. (The yellow battery lead pro- vides continuous power to maintain a clock, memo- ry storage, or other function.) If your car has a radio or is pre-wired for one: With the ignition and headlights off, identify the car battery lead by grounding one lead of the test bulb to the chassis and checking the remaining exposed wires from the cut radio connector plug. If your car is not wired for an audio unit: Go to the fuse block and find the fuse port for the battery, usually marked BAT. Speakers Identify the car speaker leads. There are two leads for each speaker which are usually color coded. A handy way to identify the speaker leads and the speaker they are connected with is to test the leads using a 1.5 V AA battery as follows. Hold one lead against one pole of the battery and stroke the other lead across the other pole. You will hear a scraping sound in one of the speakers if you are holding a speaker lead. If not, keep testing different lead combinations until you have located all the speaker leads. When you label them, include the speaker location for each. Antenna Motor If your car is equipped with an automatic power an- tenna, identify the car motor antenna lead by con- necting one bulb tester lead to the car battery lead and touching the remaining exposed wires from the cut radio connector plug one at a time. You will hear the antenna motor activate when you touch the correct wire. Antenna The antenna lead is a thick, black wire with a metal plug at the end. ❐Connect All Leads Now that you have identified all the wires in the car, you are ready to begin connecting them to the stereo unit wires. The wiring diagram (➡pages 34j37) shows the proper connections and color coding of the leads. We strongly recommend that you test the unit be- fore making a final installation. You can set the unit on the floor and make tempo- rary connections to test the unit. Use electrical tape to cover all exposed wires. Important: ≥Connect the red power lead last, after you have made and insulated all other connec- tions. Ground Connect the black ground lead of the power con- nector to the metal car chassis.

Speakers Connect the speaker wires. See the wiring diagram (➡pages 34j37) for the proper hookups. Follow the diagram carefully to avoid damaging the speak- ers and the stereo unit. The speakers used must be able to handle more than 60 W of audio power (for CQ-DFX701/ DF601U: 50 W). If using an optional audio amplifi- er, the speakers should be able to handle the maxi- mum amplifier output power. Speakers with low input ratings can be damaged. Speaker impedance should measure 4–8 ≠, which is typically marked on most speakers. Lower or higher impedance speakers will affect output and can cause both speaker and stereo unit damage. Motor Antenna Connect the car motor antenna lead to the dark blue motor antenna relay control lead. Battery Connect the yellow battery lead to the correct radio wire or to the battery fuse port on the fuse block. Antenna Connect the antenna by plugging the antenna lead into the antenna receptacle. Equipment Connect any optional equipment such as an ampli- fier, according to the instructions furnished with the equipment. Leave about 12z (30 cm) of dis- tance between the speaker leads/amplifier unit and the antenna/antenna extension cord. Read the oper- ating and installation instructions of any equipment you will connect to this unit. Power Connect the red power lead to the correct car radio wire or to the appropriate fuse port on the fuse block. If the stereo unit functions properly with all these connections made, disconnect the wires and pro- ceed to the final installation. ❐Final Installation ❐Final Checks Lead Connections Connect all wires, making sure that each connec- tion is insulated and secure. Bundle all loose wires and fasten them with tape so they will not fall down later. Now insert the stereo unit into the mounting collar. Congratulations! After making a few final checks, you’re ready to enjoy your new auto stereo system. 1. Make sure that all wires are properly connected and insulated. 2. Make sure that the stereo unit is securely held in the mounting collar. 3. Turn on the ignition to check the unit for proper operation. If you have difficulties, consult your nearest author- ized professional installer for assistance. ❐Preparation ≥We strongly recommend that you wear gloves for installation work to protect yourself from injuries. ≥When bending the mounting tabs of the mounting collar with a screwdriver, be careful not to injure your hands and fingers. ≥Disconnect the cable from the negative - battery terminal (see caution below). ≥Unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30o. Caution: ≥Do not disconnect the battery terminals of a car with a trip or navigational computer since all user settings stored in memory will be lost. Instead take extra care with installing the unit to prevent shorts. Less than 30x Dashboard Installation Installation Opening (182 mm) (53 mm) 75/32q 23/32q This unit can be installed in any dashboard having an opening as shown above. The dashboard should be 3⁄16z (4.75 mm)j7⁄32z (5.56 mm) thick in order to be able to support the unit. First complete the electrical connections, and then check them for correctness. (➡pages 34j37) 6 Power connector Lock lever (§) Mounting tabs 5 Mounting bolt ❐Installation Procedures Insert mounting collar 1 into the dashboard, and bend the mounting tabs out with a screwdriver. Make sure that the lock lever (§) is flush with the mounting collar 1 (not projecting outward). (a) Using the rear support strap 3 4 Tapping screw (5 mm·a16 mm) 2 Hex. nut (5 mm·) 3 Rear support strap 5 Mounting bolt (5 mm·) 1 Mounting collar Fire wall of car 3 mm· (b) Using the rubber cushion (option) 5 Mounting bolt (5 mm·) 1 Mounting collar Rear support bracket (provided on the car) Rubber cushion (option) Lock lever (§) 1 Secure the rear of the unit. After fixing mounting bolt 5 and power connector 6, fix the rear of the unit to the car body by either method (a) or (b) shown below. Insert trim plate 8. After installation, reconnect the negative - bat- tery terminal. 2 3 4

Remove the removable face plate. 1 Press [OPEN]. The removable face plate will be opened. 2 Push the face plate to the left. 3 Pull it out toward you. < < < Remove the Unit Lock lever Screwdriver 8 Trim plate < SOURCE D•M OPEN DISP MOSFET 60WX4 PWR [OPEN] Lock lever < Remove the trim plate 8 with a screwdriver. Pull out the unit while pushing down the lock lever with a screwdriver. Remove the unit pulling with both hands. 1 2 3 4 1 Open 2 Push 3 Pull out Contact Main unit Switch off the power of the unit. Anti-Theft System Security Indicator The security indicator blinks when the removable face plate is removed from the unit. Active the security function in the function menu display. (➡page 26) Panel Removal Alarm This alarm sounds to warn you not to forget to re- move the panel before leaving your car. This func- tion is activated when the security indicator is on. Install Removable Face Plate 1 Fit the face plate with its left hole on one of the pins provided on the main unit. 2 Fit the other hold on the other pin applying slight pressure. 3 Move the face plate up and down a few times to make sure it is secure. Then close the front panel and press down the right side of the face plate until it clicks into plate. Cautions: ≥This face plate is not water-proof. Do not expose it to water or excessive moisture. ≥Do not remove the face plate while driving your car. ≥Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level. ≥Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts. ≥If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth. ≥To avoid damaging the front panel, do not push it down or place objects on it while it is open. This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable. The security indicator will blink. Place the Removable Face Plate into Case 1 Switch off the power of the unit. 2 Remove the removable face plate. (➡page 32) 3 Gently press the button of the case and open the cover. Place the face plate into the case and take it with you when you leave the car. 1 2 3 < < 7 Removable face plate case Security indicator Contact

≥To prevent damage to the unit, be sure to follow the connection diagram below. ≥Remove approx. 1⁄4z (5 mm) of protective covering from the ends of the leads before connecting. ≥Do not insert the power connector into the unit until the wiring is completed. ≥Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and keep cable terminals free from touching any metal parts. ≥Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased when the battery terminals are disconnected. Accessory used for wiring Note: ≥ Insulate the dual CD changer control lead with vinyl tape when you do not connect it. Antenna control lead To the auto antenna control power lead of the car. (Max. 500 mA) Dual CD changer control lead External amplifier control power lead To an external amplifier. ACC power lead To ACC power, _12 V DC. Battery lead To the battery, continuous _12 V DC. Ground lead To a clean, bare metallic part of the car chassis. (Blue) (Brown/white stripe) (Blue/white stripe) (Red) Registor (1 k≠) (Yellow) Fuse (15 A) (Black) + - (Violet) (Violet/black stripe) (Right) REAR SP + - Rear speaker lead (Green/black stripe) (Green) (Left) + - (Gray) (Gray/black stripe) (Right) + - Front speaker lead (White/black stripe) (White) (Left) To front sepaker To rear sepaker 6 Power connector CQ-DF801U Antenna (L) (White) (R) (Red) CD changer input cord CD changer control connector ACC BATTERY 15 A FRONT SP CH•C-IN SUB•W REAR (White) (Red) (MONO) (L) (White) (R) (Red) (L) (White) (R) (Red) (L) (White) (R) (Red) Subwoofer cord Preout cord (Rear) Preout cord (Front) AUX input cord AUX-IN FRONT DC/DC converter Only for CQ-DF801U

❐Wiring Diagram Only for CQ-DFX701/DF601U Note: ≥ Insulate the dual CD changer control lead with vinyl tape when you do not connect it. Antenna control lead To the auto antenna control power lead of the car. (Max. 500 mA) Dual CD changer control lead External amplifier control power lead To an external amplifier. ACC power lead To ACC power, _12 V DC. Battery lead To the battery, continuous _12 V DC. Ground lead To a clean, bare metallic part of the car chassis. (Blue) (Brown/white stripe) (Blue/white stripe) (Red) Registor (1 k≠) (Yellow) Fuse (15 A) (Black) + - (Gray) (Gray/black stripe) (Right) + - Front speaker lead (White/black stripe) (White) (Left) To front sepaker 6 Power connector CQ-DFX701/DF601U Antenna SUB•W REAR CD.C-IN (L) (White) (R) (Red) (L) (White) (R) (Red) (L) (White) (R) (Red) (L) (White) (R) (Red) Subwoofer cord Preout cord (Rear) Preout cord (Front) AUX input cord CD changer input cord CD changer control connector ACC BATTERY 15 A AUX-IN FRONT FRONT SP + - (Violet) (Violet/black stripe) (Right) + - Rear speaker lead (Green/black stripe) (Green) (Left) To rear sepaker REAR SP (White) (Red) (MONO)

❐Upgrading the System Example Combination ≥CD changer (CX-DP88U) ≥Stereo power amplifier Note: ≥For wiring, carefully read the operating instructions for the devices connected. CQ-DF801U CD changer control connector CH•C-IN (R) (Red) (L) (White) Stereo power amplifier Subwoofer speakers SUB•W (R) (Red) (L) (White) DIN cord BATTERY (Fuse 3 A) Extension cord (supplied for CX-DP88U) CD changer CX-DP88U Ground lead DC/DC converter Only for CQ-DF801U ❐Upgrading the System Example Combination ≥CD changer (CX-DP88U) ≥Stereo power amplifier Note: ≥For wiring, carefully read the operating instructions for the devices connected. Only for CQ-DFX701/DF601U CQ-DFX701/DF601U CD changer control connector CD.C-IN (R) (Red) (L) (White) Stereo power amplifier Subwoofer speakers SUB•W (R) (Red) (L) (White) DIN cord BATTERY (Fuse 3 A) Extension cord (supplied for CX-DP88U) CD changer CX-DP88U Ground lead

➡Clean CD, referring to the section on “Notes on CD”. Mounting angle is over 30o. ➡Adjust mounting angle to less than 30o. Instable mounting. ➡Mount the unit securely with the mounting parts, referring to the section on installation. ≥CD is defective. ≥Mechanical trouble. ➡Press [OPEN] to open the panel and press [<] (EJECT). If normal operation is not restored yet, call the store where you purchased the unit or the nearest service station to ask for repairs. CD sound skips, tone quality is low. Sound skips due to vi- bration. CD is not ejected. CD is in the CD compart- ment but no sound is made, or CD is ejected automatically. CD is upside down. ➡Place CD in the correct direction, and the label side up. ❐CD CD is dirty. ➡Clean CD, referring to the section on “Notes on CD”. Trouble Cause/Step No sound from left, right, front or rear speakers. Left and right balance, or front and rear balance is off on one side. ➡Adjust BAL/FAD mode as appropriate. ❐Sound Setting The right speaker wire is connected to the left speaker and the left speaker wire to the right speaker. ➡Connect the speaker wires to the correct ones. Left and right sounds are reversed in stereo lis- tening. Trouble Cause/Step Cables are not correctly connected. ➡Connect the cables correctly. ❐Radio Much noise in FM stereo and monaural broad- casts. Station is too far, or signals are too weak. ➡Select other stations of higher signal level. The radio antenna is not extended enough. ➡Set the radio antenna enough. Battery cable is not correctly connected. ➡Connect the battery cable to the terminal that is always live. Preset station is reset. Trouble Cause/Step Preliminary Steps Check and take steps as described in the tables below. If You Suspect Something Wrong Immediately switch power off. Disconnect the power connector and check that there is nei- ther smoke nor heat from the unit before asking for repairs. Never try to repair the unit yourself because it is dangerous to do so. No power. Trouble Car’s engine switch is not on. ➡Turn your car’s ignition switch to ACC or ON. Troubleshooting Tips ❐Common Cables are not correctly connected. ➡Connect cables correctly. Battery cable is not correctly connected. ➡Connect the battery cable to the terminal that is always live. Accessory cable is not correctly connected. ➡Connect the accessory cable to your car’s ACC source. Grounding wire is not correctly connected. ➡Connect the grounding wire to a metal part of the car. Fuse is burnt. ➡Call the store where you purchased the unit, or your nearest service station (see the attached sheet) and ask for fuse replacement. No sound. Mute is set to ON. ➡Set it to OFF. Cables are not correctly connected. ➡Connect cables correctly. Condensation (dew) ➡Wait for a while before use. Cautions: ≥Do not use the unit if it malfunctions or is something wrong. ≥Do not use the unit in abnormal condi- tion, for example, without sound, or with smoke or foul smell, can cause ig- nition or electric shock. Immediately stop using it and call the store where you purchased it. Cause/Step The display shows “display and light off”. ➡Press [DISP] to change the display. Only sound, no display. A mobile phone is used near the unit. ➡Keep the mobile phone away from the unit. Noise. Demonstration mode is ON. ➡Press [DISP] to cancel demonstration mode. ≥Buttons unusable. ≥Audio sound is not matched on the mode display. 3z (8 cm) disc is ejected automatically.

exterior cleaning. Never use benzine, thinner or other solvents. Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest au- thorized Panasonic Servicenter. The product should be serviced only by a qualified technician. Replacing the Fuse Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or con- necting the unit directly without a fuse, could cause fire or damage to the stereo unit. If the replacement fuse fails, contact your nearest Panasonic Servicenter for service. Error Display Messages ❐CD ≥Disc is dirty, or is upside down. ≥Disc has scars. ➡Press [OPEN] to open the front panel and press [<] (EJECT). ≥Check disc. ≥Load the disc again. Display Cause/Step ❐CD Changer ≥Disc is dirty, or is upside down. ≥Disc has scars. ➡Check disc. (The changer automatically switches to the next disc.) No operation by some cause. ➡If normal operation is not restored yet, call and ask for repairs. The display continues if you cannot switch off the power. No disc is in the changer (magazine). ➡Insert discs into the changer (magazine). Display Cause/Step After 5 seconds. After 5 seconds. POWER OFF POWER OFF POWER OFF Buttons are invalid for operation. Battery poles (i) (j) are reversed. ➡Insert the battery correctly. ❐Remote Control Wrong the battery. ➡Check the battery. The battery has run down. ➡Replace the battery. Remote control is in the wrong direction. ➡Direct the remote control at sensor (REMOTE) on the panel. Trouble Cause/Step After 5 seconds. After 5 seconds. POWER OFF No operation by some cause. ➡Press [OPEN] to open the front panel and press [<] (EJECT). ≥Check disc. ≥Load the disc again. Note: ≥For details, refer to operating instructions for the changer used.

≥Do not touch the underside of the disc. ≥Do not make scratches on the discs. ≥Do not bend disc. ≥When not in use, keep CD in the case. Do not use irregular shaped CDs. Do not leave discs on the following places: ≥Direct sunlight ≥Near car heaters ≥Dirty, dusty and damp areas ≥Seats and dashboards Disc cleaning Use a dry, soft cloth to wipe from the center outward. Caution on new discs A new disc may have rough edges on its inner and outer perimeter. These may cause malfunction. Remove the rough edges using a pencil, etc. ONLY USE DISCS CARRYING THE LABEL Care of the Unit ❐Cleaning this Unit Use a dry, soft cloth to wipe. ❐Caution on Cleaning Never use solvents such as benzine, thinner as they may mar the surface of the unit. Label side Rough edge Rough edge Do not use irregular shaped CDs. ❐General Power supply: 12 V DC (11 Vj16 V), test voltage 14.4 V, negative ground Current consumption: Less than 2.2 A (CD play mode; 0.5 Wa4 channels) Maximum power output: 60 Wa4 channels at 1 kHz, Volume control maximum (CQ-DF801U) 50 Wa4 channels at 1 kHz, Volume control maximum (CQ-DFX701/DF601U) Tone adjustment range: Bass: n12 dB at 100 Hz Treble: n12 dB at 10 kHz Suitable speaker impedance: 4j8 ≠ Pre-Amp output voltage: 5.0 V (CD play mode; 1 kHz, 0 dB) (CQ-DF801/DFX701U) 2.5 V (CD play mode; 1 kHz, 0 dB) (CQ-DF601U) Subwoofer output voltage: 5.0 V (CQ-DF801/DFX701U) 2.5 V (CQ-DF601U) Pre-Amp output impedance: 60 ≠(CQ-DF801/DFX701U) 200 ≠ (CQ-DF601U) Subwoofer output impedance:60 ≠ Dimensions (WaHaD): 7za115/16za57/8z (178a50a150 mm) Weight: 3 lbs. 15 oz (1.8 kg) (CQ-DF801U) 3 lbs. 8 oz (1.6 kg) (CQ-DFX701/DF601U) ❐FM Stereo Radio Frequency range: 87.9 MHzj107.9 MHz Usable sensitivity: 11.0 dBf. (1.25 ¨V, 75 ≠) 50 dB quieting sensitivity: 15.2 dBf. (1.6 ¨V, 75 ≠) Frequency response: 30 Hzj15 kHz (n3 dB) Alternate channel selectivity: 75 dB Stereo separation: 35 dB (1 kHz) Image response ratio: 75 dB IF response ratio: 100 dB Signal/noise ratio: 70 dB ❐AM Radio Frequency range: 530 kHzj1 710 kHz Usable sensitivity: 28 dB/¨V (25 ¨V, S/N 20 dB) ❐CD Player Sampling frequency: 8 times oversampling DA converter: MASH • 1 bit/4 DAC system Error correction system: Panasonic super decoding algorithm Pick-up type: Astigma 3-beam Light source: Semiconductor laser Wave length: 780 nm Frequency response: 20 Hzj20 kHz (n1 dB) Signal/noise ratio: 96 dB Total harmonic distortion: 0.01 % (1 kHz) Wow and flutter: Below measurable limits Channel separation: 75 dB Above specifications comply with EIA standards. Note: ≥Specifications and the design are subject to modification without notice due to improvements in technology. Notes on CD

Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Sales Company. Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”) Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 http://www.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 http://www.panasonic.ca YEFM283658 F1200-0 Printed in China Imprimé en Chine Impreso en China