Getac S400 Operation & User’s Manual

Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. NOTE The information in this manual is subject to change without notice. Most screens and operating instructions in this manual are based on Windows 7. If you’re using a different version of Windows, the screens and related operations may not be the same.For the latest version of the manual, please visit the Getac website at www.getac.com.

consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. An ENERGY STAR® qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the ENERGY STAR® z When every home office is powered by equipment that has earned the ENERGY STAR®, the change will keep over 289 billion pounds of greenhouse gases out of the air. z If left inactive, ENERGY STAR® qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago. z Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer. z Businesses that use ENERGY STAR® enabled office equipment may realize additional savings on air conditioning and maintenance.

office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. z Power management (“sleep settings”) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers’ utility bills, and prevent greenhouse gas emissions.

Chapter 1 Getting Started .................................................................. 1-1 Getting the Computer Running ............................................. 1-2 Unpacking ........................................................................... 1-2 Using the Tether (Optional) ............................................... 1-3 Connecting to AC Power .................................................... 1-4 Turning On and Off the Computer ................................... 1-5 Taking a Look at the Computer ............................................. 1-7 Front Components .............................................................. 1-7 Rear Components ............................................................... 1-8 Right-Side Components ...................................................... 1-9 Left-Side Components ...................................................... 1-10 Top-open Components ..................................................... 1-12 Bottom Components ........................................................ 1-15 Chapter 2 Operating Your Computer ................................................ 2-1 Using the Keyboard ................................................................ 2-2 Typewriter Keys .................................................................. 2-2 Cursor-Control Keys ............................................................ 2-2 Numeric Keypad ................................................................. 2-3 Function Keys ...................................................................... 2-4 Fn Key .................................................................................. 2-4 Hot Keys .............................................................................. 2-4 Using the Touchpad ................................................................ 2-6 Configuring the Touchpad ................................................. 2-8 Using the Touchscreen (Optional) ......................................... 2-9 Using Multi-touch Gestures (Optional) ........................... 2-10 Using the Input Panel ........................................................... 2-13 Using the Quick Buttons ....................................................... 2-14

Inserting and Removing a Disc ........................................ 2-17 Using the Network Features ................................................ 2-18 Using the Modem (Optional) ........................................... 2-18 Using the LAN ................................................................... 2-19 Using the Wireless LAN .................................................... 2-19 Using the Bluetooth Feature (Optional) ............................. 2-23 Turning On/Off the Bluetooth Radio .............................. 2-23 Connecting to another Bluetooth Device ....................... 2-24 Using the Fingerprint Sensor ............................................... 2-27 Using the 3G Feature (Optional) .......................................... 2-29 Installing a SIM Card ......................................................... 2-29 Turning On/Off the 3G Radio .......................................... 2-30 Setting up a 3G Connection ............................................. 2-31 Using the 3G Application ................................................. 2-32 Chapter 3 Managing Power ............................................................... 3-1 AC Adapter .............................................................................. 3-2 Battery Pack ............................................................................. 3-3 Charging the Battery Pack ................................................. 3-3 Initializing the Battery Pack ............................................... 3-4 Checking the Battery Level ................................................ 3-5 Replacing the Battery Pack ................................................ 3-6 Battery Low Signals and Actions ....................................... 3-7 Power Management ............................................................... 3-8 Hibernation ......................................................................... 3-9 Power-Saving Tips ................................................................. 3-10 Chapter 4 Expanding Your Computer ............................................... 4-1 Connecting an External Monitor ........................................... 4-2 Connecting a Serial Device ..................................................... 4-3 Connecting a USB Device ....................................................... 4-4 Connecting an eSATA Device ................................................. 4-5 Connecting an IEEE 1394 Device ............................................ 4-6 Connecting Audio Devices ..................................................... 4-7 Using Smart Cards ................................................................... 4-8 Using PC Cards ......................................................................... 4-9

Using Storage Cards .............................................................. 4-13 System Memory Upgrade ..................................................... 4-15 Chapter 5 Using BIOS Setup and System Recovery .......................... 5-1 BIOS Setup ............................................................................... 5-2 When and How to Use ....................................................... 5-2 Information Menu .............................................................. 5-3 Main Menu .......................................................................... 5-4 Advanced Menu .................................................................. 5-5 Security Menu ..................................................................... 5-9 Boot Menu ........................................................................ 5-11 Exit Menu .......................................................................... 5-12 System Recovery .................................................................... 5-13 Chapter 6 Using Special Utilities ........................................................ 6-1 Using G-Manager .................................................................... 6-2 Starting G-Manager ............................................................ 6-2 System Tab .......................................................................... 6-3 Battery Tab .......................................................................... 6-4 ECO Tab ............................................................................... 6-6 ECO Information ................................................................. 6-7 Antenna Tab ....................................................................... 6-8 Monitoring Tab ................................................................... 6-9 GPS Status Tab .................................................................. 6-11 Quick Button Definition Utility ............................................ 6-12 Chapter 7 Caring for the Computer ................................................... 7-1 Protecting the Computer ....................................................... 7-2 Using an Anti-Virus Strategy ............................................. 7-2 Using Windows Action Center ........................................... 7-2 Using the Cable Lock .......................................................... 7-3 Taking Care of the Computer ................................................ 7-4 Location Guidelines ............................................................ 7-4 General Guidelines ............................................................. 7-4 Cleaning Guidelines ............................................................ 7-5 Battery Pack Guidelines ...................................................... 7-5 Touchscreen Guidelines ...................................................... 7-6

Chapter 8 Troubleshooting ................................................................ 8-1 Preliminary Checklist ............................................................... 8-2 Solving Common Problems .................................................... 8-3 Battery Problems ................................................................ 8-3 Bluetooth Wireless Transmission Problems ...................... 8-3 Display Problems ................................................................. 8-4 DVD Drive Problems ........................................................... 8-5 ExpressCard Problems ......................................................... 8-5 Hardware Device Problems ................................................ 8-6 Hard Disk Drive Problems ................................................... 8-6 Keyboard, Mouse, and Touchpad Problems ..................... 8-7 LAN Problems ...................................................................... 8-7 Modem Problems ................................................................ 8-8 PC Card Problems ................................................................ 8-8 Power Management Problems .......................................... 8-8 Software Problems ............................................................. 8-9 Sound Problems .................................................................. 8-9 Startup Problems .............................................................. 8-10 WLAN Problems ................................................................ 8-11 Other Problems ................................................................. 8-12 Resetting the Computer ....................................................... 8-13 Appendix A Specifications .................................................................... A-1 Appendix B Regulatory Information ................................................... B-1 On the Use of the System ....................................................... B-2 Class B Regulations ............................................................. B-2 Safety Notices ..................................................................... B-3 On the Use of the RF Device .................................................. B-6 USA and Canada Safety Requirements and Notices ........ B-6 European Union CE Marking and Compliance Notices .... B-9

Chapter 1 Getting Started Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer.

Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: z Rugged computer z Accessories: − AC adapter − AC power cord − Driver disc − Document(s) − Stylus and tether (depending on your model) Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future.

Using the Tether (Optional) A tether is provided for attaching the stylus to your computer. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by n below). Then, insert the other end through the first loop (as indicated by o below) and pull it tight. 2. Insert the other loop end to the tether hole on the computer (as indicated by n below). Then, insert the stylus end through the loop (as indicated by o below) and pull it tight.

Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer. 1. Plug the DC cord of the AC adapter to the power connector of the computer (n). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (o). 3. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION: z When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer.

z When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. Turning On and Off the Computer Turning On 1. Open the top cover by pulling the cover latch and lifting up the cover. You can tilt the cover forward or backward for optimal viewing clarity.

2. Press the power button ( ). 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... Do this... Power off (Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep Press the power button* or use the Windows Start menu to put the computer in Sleep mode. Hibernate Use the Windows Start menu to put the computer in Hibernation mode. (See “Hibernation” in Chapter 3 for more information.) * “Sleep” is the default setting of the power button. You may change what the power button does in Windows Control Panel.

Taking a Look at the Computer NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity. (Engage the locking mechanism if existing.) Front Components Ref Component Description See Also n Top Cover Latch Locks the top cover. P. 1-5 o Stereo Speaker Sends out sound and voice from the computer. p Handle Provides a convenient way to carry the computer.

Rear Components Ref Component Description See Also n Power Connector Connects the AC adapter. P. 1-3 o USB Port Connects a USB device, such as a USB flash disk, printer, digital camera, joystick, and more. P. 4-4 p RS232 Serial Connector Connects a serial mouse or serial communication device. P. 4-3 q RJ-45 Connector Connects the LAN cable. P. 2-19 r RJ-11 Connector (optional) Connects the telephone line. P. 2-18 s VGA Connector Connects an external display monitor. P. 4-2 t Kensington Lock Locks the computer to a stationary object for security. P. 7-2

Right-Side Components Ref Component Description See Also n SIM Card Slot Accepts a 3G SIM card for models having the 3G module. NOTE: The slot still exists but cannot be used for models without the 3G module. P. 2-29 o Smart Card Reader Accepts a smart card for additional security feature. P. 4-8 p PCMCIA Slot Accepts a PC card for additional functions. P. 4-9 q ExpressCard Slot Accepts an ExpressCard/34 or ExpressCard/54 for additional functions. P. 4-11 r Battery Pack Supplies power to your computer when external power is not connected. P. 3-3 s Super Multi Drive Accepts a compact disc for installing or loading software, accessing data, and playing music/video. P. 2-16

Left-Side Components Ref Component Description See Also n Tether Hole Stylus tethered to this hole. P. 1-3 o Stylus Serves as the input device by tapping on the touchscreen to make selections and enter information. P. 2-9 p Audio Output Connector Connects a set of headphones or external speakers with amplifier. P. 4-7 q Microphone Connector Connects an external microphone. P. 4-7 r eSATA/USB Combo Port Connects an eSATA device such as an external hard drive or optical drive. P. 4-5 Can also function as a USB port. s RF (radio frequency) Switch Serves as the master on/off control of the RF radio. When set to OFF, all wireless modules (such as WLAN, Bluetooth, and 3G) cannot be used. When set to ON, individual settings of the module work. P. 2-20, 2-23, 2-30

Ref Component Description See Also t Storage Card Reader Accepts a MultiMediaCard (MMC), Secure Digital (SD), Memory Stick (MS) or Memory Stick PRO (MS PRO) card for removable storage media. P. 4-13 u USB Port Connects a USB device, such as a USB flash disk, printer, digital camera, joystick, and more. P. 4-4 v Mini IEEE 1394 Port Connects an IEEE 1394 device such as a scanner, printer, DVCAM, and VCR. P. 4-5

Top-open Components Ref Component Description See Also n Camera Lens (optional) Allows you to use the camera function. o LCD Screen Displays the output of the computer. May include the optional touchscreen feature. P. 2-9 p Power Button Turns the power on or off (Sleep mode by default). P. 1-5 q Keyboard Serves as the data input device of the computer. P.2-2

Ref Component Description See Also r Microphone Receives sound and voice for the computer. s Quick Buttons P. 2-14 P1 Starts G-Manager by default. P2 Starts Microsoft Internet Explorer by default. Toggles Blackout mode on or off. Brings up the ECO menu for selecting a power profile when using battery power. Toggles the sunlight-readable mode on or off. t Touchpad Serves as the pointing device of the computer. P. 2-6 u Indicators Power Lights green when computer is on. P. 1-5 Blinks green when computer is in Sleep mode. Battery Charge Lights green when the battery is fully charged. P. 3-3 Lights amber when the battery is being charged. Blinks red when the battery’s capacity is below 10 %. Blinks amber when the battery is in an abnormal condition.

Ref Component Description See Also Both indicators blink green at the same time when the optional hard disk drive heater is on. CAUTION: The “HDD Preheat” feature works with low temperature 9-cell battery packs only. Do not use other battery types. P. 5-5 If you turn on the system when the temperature is too high for operation, both indicators blink green for 10 seconds to indicate the system will remain off as a protection. Wait till the temperature drops down. P. 8-10 Hard Disk/ DVD Drive Blinks green when computer is reading / writing data to the hard disk or DVD drive. Num Lock Lights green when Num Lock is on. P. 2-3 Caps Lock Lights green when Caps Lock is on. P. 2-3 WLAN Lights green when WLAN radio is on. P. 2-20 Bluetooth Lights green when Bluetooth radio is on. P. 2-23 3G Lights green when 3G radio is on. P. 2-29 v Fingerprint Sensor Serves as the fingerprint verification, preventing unauthorized access to your computer. P. 2-31

Bottom Components Ref Component Description See Also n Docking Connector Connects to the Office Dock (purchased separately). o GPS Pass-through Connector (optional) Connects to the external antenna for GPS receiver. NOTE: Must be connected via docking. p 3G Pass-through Connector (optional) Connects to the external antenna for 3G transmission. NOTE: Must be connected via docking. q Memory Slots Inside are the memory slots for expanding the memory size of your computer. P. 4-15 r Hard Disk Drive Inside is the hard disk drive.

Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer. CAUTION: The computer can get uncomfortably warm when you use it in high temperatures. As a safety precaution in such a circumstance, do not place the computer on your lap or touch it with your bare hands for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn.

Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: z Typewriter keys z Cursor-control keys z Numeric keys z Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the Ctrl, Alt, Esc, and lock keys for special purposes. When the lock keys (Caps Lock and Num Lk) are pressed, their corresponding indicators light up. The Control (Ctrl) / Alternate (Alt) key is normally used in combination with other keys for program-specific functions. The Escape (Esc) key is usually used for stopping a process. Examples are exiting a program and canceling a command. The function depends on the program you are using. Cursor-Control Keys Cursor-control keys are generally used for moving and editing purposes. NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes.

Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next: Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: z When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off. z Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead.

Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold Fn, then press the other key. Hot Keys Hot keys refer to a combination of keys that can be pressed any time to activate special functions of the computer. Most hot keys operate in a cyclic way. Each time a hot key combination is pressed, it shifts the corresponding function to the other or next choice. You can easily identify the hot keys with the icons imprinted on the keytop. The hot keys are described next. Key Description Switches the keyboard backlight off or on (with 4-level brightness). * Switches the wireless LAN radio off or on. Decreases the sound volume. Increases the sound volume.

Key Description Switches the display output when external devices are connected. Decreases the LCD brightness. Increases the LCD brightness. Switches the touchscreen off or on. * Switches the touchpad off or on. Switches the system sound output off (mute) or on. Switches LCD backlight off or on. Serves as the sleep button that you can define with Windows’ Power Options. (See the “Power Management” in Chapter 3.) TABLE NOTE: * means “select models only.” Windows Keys The keyboard has two keys that perform Windows-specific functions: Windows Logo key and Application key. The Windows Logo key opens the Start menu and performs software-specific functions when used in combination with other keys. The Application key usually has the same effect as a right mouse click. (See your Windows manual for more information.)

Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: z Press Fn+F9 to toggle the touchpad on or off. z For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.

The touchpad consists of a rectangular pad (work surface) and a left and right buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches the edge of the pad, simply relocate yourself by lifting the finger and placing it on the other side of the pad. Here are some common terms that you should know when using the touchpad: Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or– Tap twice on the pad rapidly. Work surface within the inner rectangle

Term Action Drag and drop Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination. The object will drop into the new location. –or– Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad. Then, move your finger across the pad to drag the selected object to your destination. When you lift your finger from the pad, the selected object will drop into place. Scroll To scroll is to move up and down or left and right in the working area on the screen. To move vertically, place your finger on the right or left edge of the pad and slide your finger up and down along the edge. To move horizontally, place your finger on the top or bottom edge of the pad and slide your finger left and right. This function works only after you install the touchpad driver supplied with the computer and configure the touchpad to enable the function. It may not work for all applications. TABLE NOTE: If you swap the left and right buttons, “tapping” on the touchpad as an alternative method of pressing the left button will no longer be valid. Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Control Panel Æ Mouse Properties.

Using the Touchscreen (Optional) NOTE: Press Fn+F8 to toggle the touchscreen on or off. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use your finger or the included stylus. The touchscreen is a touch-sensitive device that allows you to navigate on the screen without using a keyboard, touchpad, or mouse. Use the included stylus to select objects on the screen. The stylus can be stretched for better grip and handling. Here are some common terms that you should know when using the touchscreen: Term Action Click/Point Tap gently on the touchscreen. Double-click Tap twice on the touchscreen rapidly.

Term Action Drag and drop Press lightly on the touchscreen and move your finger until you reach your destination (drag). Finally, release your finger (drop) when you finish dragging your selection to the destination. The object will drop into the new location. Using Multi-touch Gestures (Optional) If your computer model comes with multi-touch-capable screen and Windows 7, you can interact with your computer by placing two fingers on the screen. The movement of the fingers across the screen creates “gestures,” which send commands to the computer. Here are the multi-touch gestures that you can use: Gestures Actions ( = finger down; = finger up) Descriptions Pan (Scroll) or Drag 1 or 2 fingers up or down. Use panning to see another part of a page that has scroll bars. Zoom (Pinch) Move two fingers apart/toward each other. Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming.

Gestures Actions ( = finger down; = finger up) Descriptions Rotate or Move two fingers in opposing directions. -or- Use one finger to pivot around another. Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counter- clockwise). The gesture works in applications that support the specific gesture. Press and Tap Press on target and tap using a second finger. Use press and tap to access the shortcut menu. Two- finger Tap Tap two fingers at the same time (where the target is in the midpoint between the fingers). The function is defined by applications that support the specific gesture.

Gestures Actions ( = finger down; = finger up) Descriptions Flicks Make quick drag gestures in the desired direction. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward.

Using the Input Panel Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7: z Touch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard. z Writing Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text. To open the Input Panel, tap the Input Panel tab, which appears by default on the left edge of the screen. To switch between the two types, tap or at the upper left corner of the Input Panel. NOTE: For more information on using the Input Panel, see Windows’ online help.

Using the Quick Buttons The Quick Buttons allow you to quickly start a program or activate a function. The quick buttons are: Button Description P1 Starts G-Manager by default. You can re-define the function of the button. (See “Quick Button Definition Utility” in Chapter 6 for information.) Can also serve as “Emergency” button if set according in the BIOS Setup program. (See “Advanced Menu” in Chapter 5 for information.) P2 Starts Microsoft Internet Explorer by default. You can re-define the function of the button. (See “Quick Button Definition Utility” in Chapter 6 for information.) Toggles Blackout mode on or off. In Blackout mode, the LCD backlight, keyboard/button backlight, and LED indicators are all turned off; and the sound is muted. To bring the computer out of Blackout mode, press the same button again or the power button.

Button Description Brings up the ECO menu as shown below: Select a mode before the ECO menu disappears. You can select a mode by pressing the arrow key. Whenever you press the ECO button, the setting always defaults to Off. The ECO mode will return to the default Off setting when AC power is connected, any power related setting is changed, the computer resumes from Sleep/Hibernation mode, or the computer is restarted. Each ECO mode (Quick, Power Saving, or Work) is a combination of power settings that results in different power consumptions. (For information on configuring the ECO modes, see “ECO Tab” in Chapter 6.) NOTE: The button works only when using battery power. Toggles the sunlight-readable mode on or off. In sunlight-readable mode, the LCD brightness is increased to the highest level. The mode automatically ends when the brightness setting is changed, the computer resumes from Sleep/Hibernation mode, or the computer is restarted. ECO Menu Off Quick Mode Power Saving Work Mode

Using the DVD Drive Your computer comes with a Super Multi drive. The drive can read from and write to CD, DVD+, DVD- and DVD-RAM media. CAUTION: z When inserting a disc, do not use force. z Make sure that the disc is correctly inserted into the tray, and then close the tray. z Do not leave the drive tray open. Also, avoid touching the lens in the tray with your hand. If the lens becomes dirty, the drive may malfunction. z Do not wipe the lens using materials with rough surface (such as paper towel). Instead, use a cotton swab to gently wipe the lens. FDA regulations require the following statement for all laser-based devices: “Caution, Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.” NOTE: The DVD drive is classified as a Class 1 laser product. This label is located on the DVD drive. NOTE: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Inserting and Removing a Disc Follow this procedure to insert or remove a disc: 1. Turn on the computer. 2. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended. 3. To insert a disc, place down the disc in the tray with its label facing up. Slightly press the center of the disc until it clicks into place. To remove a disc, hold the disc by its outer edge and lift it up from the tray. 4. Gently push the tray back into the drive. NOTE: In the unlikely event that you are unable to release the drive tray by pressing the eject button, you can manually release the disc. (See “Optical Drive Problems” in Chapter 8.)

Using the Network Features Using the Modem (Optional) The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line. NOTE: z When using the communication software, you may have to disable power management. z Do not enter the Sleep mode when using the communication software.

Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub. Using the Wireless LAN The WLAN features include: z Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support z WEP (Wired Equivalent Privacy) 64/128-bit data encryption z IEEE 802.11a/b/g/n standard compliance

Technology Stated Maximum Throughput (Mbps) Data Rates (Mbps) Band (GHz) Modulation Technology 802.11a 54 54, 48, 36, 24, 18, 12, 9, 6 5.15 ~ 5.35 OFDM (Orthogonal Frequency Division Multiplexing) 802.11b 11 11, 5.5, 2, 1 2.412 ~ 2.462 DSSS (Direct Sequence Spread Spectrum) 802.11g 54 54, 36, 18, 9 2.4 OFDM (Orthogonal Frequency Division Multiplexing) 802.11n 100 Mbps or more 100 ~ 210 2.4 / 5 Spatial multiplexing, uses MIMO (multiple-input multiple-output) NOTE: 802.11g mode is backward compatible with 802.11b mode. Turning On/Off the WLAN Radio NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to turn off wireless LAN when using your computer in the airplane. To turn on the WLAN radio: 1. Make sure that the RF switch is at the ON position.

2. To turn on the WLAN radio, press Fn+F1 or click the WLAN button in the Quick Bar as shown below (an X over the button means the radio is currently off.) When the WLAN radio is on, the WLAN indicator ( ) glows in green. NOTE: The Quick Bar appears on Windows desktop by default. If it is not open, you can right-click the Getac Utility icon ( ) located on Windows taskbar and select Quick Bar to open it. 3. Windows Mobility Center has wireless network turned on by default. The Wireless Network icon on the taskbar should appear without a red X. (In case you have previously turned it off in Windows Mobility Center, be sure to turn it on when using the function the next time.) To turn off the WLAN radio: You can turn off the WLAN radio by pressing Fn+F1 or using the Quick Bar. If you want to turn off all wireless radio, slide the RF switch to the OFF position. Connecting to a Wireless Network 1. Make sure that the WLAN function is enabled (as described above). 2. Tap the Wireless Network icon on the taskbar. (An orange light in the icon indicates connections are available.) 3. In the list of available wireless networks, tap a network, and then tap Connect.

4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase. For more information on setting a wireless network connection, refer to Windows online help. NOTE: You can use Intel® PROSet Wireless to take full advantage of the WiFi capabilities of your computer. See the Help of the utility for instructions.

Using the Bluetooth Feature (Optional) Depending on your model, your computer may incorporate the Bluetooth capability for short-range (about 10 meters) wireless communications between devices without requiring a cable connection. With Bluetooth wireless technology, data can be transmitted through walls, pockets and briefcases as long as two devices are within range. The status of the Bluetooth connection is indicated by the Bluetooth icon located in the taskbar. (You need to tap on the taskbar to show the hidden icons.) Status Icon Off (blue with red logo) On (blue with white logo). Connected (blue with green logo) You can use the Bluetooth Utility to configure Bluetooth wireless connection settings and transfer files. Turning On/Off the Bluetooth Radio To turn on the Bluetooth radio: 1. Make sure that the RF switch is at the ON position. 2. To turn on the Bluetooth radio, click the Bluetooth button in the Quick Bar as shown below (an X over the button means the radio is currently

off.) When the Bluetooth radio is on, the Bluetooth indicator ( ) glows in green. NOTE: The Quick Bar appears on Windows desktop by default. If it is not open, you can right-click the Getac Utility icon ( ) located on Windows taskbar and select Quick Bar to open it. 3. The Bluetooth function is enabled by default, as indicated by the Bluetooth icon on the Windows taskbar. (In case you have previously disabled the function in the Bluetooth utility, be sure to enable it when using the function the next time.). To turn off the Bluetooth radio: You can turn off the Bluetooth radio by using the Quick Bar or Bluetooth utility. If you want to turn off all wireless radio, slide the RF switch to the OFF position. Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.)

3. Start the Bluetooth utility by double-clicking the Bluetooth icon on the taskbar and click New Connection. 4. The Add New Connection Wizard window appears. Select Express Mode (Recommended), and then click Next.

5. Select the device to connect to and click Next. 6. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth Utility, see the Bluetooth Utility Help.

Using the Fingerprint Sensor The fingerprint sensor provides a strong authentication mechanism based on fingerprint recognition. You can log on to your computer or sign in to a web site with your fingerprint instead of a password. NOTE: You can register a fingerprint only after creating a password for the Windows user account. To register your fingerprint, click Start Æ All Programs Æ Fingerprint Software Æ Fingerprint Registration. Click the finger you want to register and follow the onscreen instructions to complete.

You can then use the Fingerprint Software to set up how the fingerprint authentication works. For detailed information, click Start Æ All Programs Æ Fingerprint Software Æ Help.

Using the 3G Feature (Optional) 3G is the third generation of mobile phone standards and technology after 2G. Services include wide-area wireless voice telephony and broadband wireless data, all in a mobile environment. Unlike IEEE 802.11 networks, 3G networks are “wide area cellular telephone networks” which evolved to incorporate high-speed internet access and video telephony. IEEE 802.11 networks are short range, high-bandwidth networks primarily developed for data. NOTE: Your model only supports data transmission, voice transmission is not supported. Installing a SIM Card To use the 3G feature to connect to the Internet, you need to subscribe to 3G service and acquire a SIM card from the service provider. To install the SIM card, follow these steps: 1. Turn off the computer and disconnect the AC adapter. 2. Remove the battery pack. (See “Replacing the Battery Pack” in Chapter 3 for instructions.) 3. Insert the SIM card into the holder. Make sure the golden contact area on the card is facing upward and the beveled corner on the SIM card facing outward. NOTE: To remove the SIM card, push inward to release and slide the SIM card out of the slot.

4. Replace the battery pack. 5. Close the cover. Make sure the latches are engaged. Turning On/Off the 3G Radio To turn on the 3G radio: 1. Make sure that the RF switch is at the ON position. 2. To turn on the 3G radio, click the 3G button in the Quick Bar as shown below (an X over the button means the radio is currently off.) When the 3G radio is on, the 3G indicator ( ) glows in green. NOTE: The Quick Bar appears on Windows desktop by default. If it is not open, you can right-click the Getac Utility icon ( ) located on Windows taskbar and select Quick Bar to open it. 3. Make sure that the 3G utility (OneClick Internet) has 3G radio turned on. To turn off the 3G radio: You can turn off the 3G radio by using the Quick Bar or 3G utility. If you want to turn off all wireless radio, slide the RF switch to the OFF position.

Setting up a 3G Connection To set up a 3G connection for the first time, follow these steps: 1. Make sure that the SIM card is inserted and the 3G function is enabled (as described above). 2. On Windows desktop, double click the OneClick Internet shortcut on Windows desktop. The screen as below appears. 3. If necessary, enter the PIN of your SIM card. 4. If the radio is currently off, click to turn on the radio. 5. Click Settings. You will be in the Profile page. Click to set up a new profile.

6. Enter the required information. Contact your network operator for the correct information. Using the 3G Application Once a new profile has been created, it will appear in the dropdown menu Profiles. You can then select it by clicking Set Profile to use it. You can manage the mobile Internet communication: z Internet Connection and Email download z SMS Manager z Managing contacts from SIM and Outlook z GPS Management (for models having the GPS module) NOTE: For detailed information on using OneClick Internet, click Help.

Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.

AC Adapter CAUTION: z The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. z The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord. z When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or computer. z When unplugging the connector, always hold the plug head. Never pull on the cord. The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC.

Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 7. Charging the Battery Pack NOTE: z Charging will not start if the battery’s temperature is below 0 °C (32 °F) or above 45 °C (113°F); the charging process will stop if the battery’s temperature gets above 60 °C (140 °F). To avoid damaging the battery under this situation, disconnect the AC adapter and wait for the battery to return to room temperature before charging again. z During charging, do not disconnect the AC adapter before the battery has been fully charged; otherwise you will get a prematurely charged battery. To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Charge Indicator ( ) on the computer glows amber to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged. When the battery is fully charged, the Battery Charge Indicator lights green.

The charging times are as follows: Battery Type Charging Time Computer is Off Computer is On and in Video Playback State 6-cell (4 A) 2.5~3 hours 3~3.5 hours 9-cell (4 A) 3.5~4 hours 3.5~4 hours CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery. NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the computer. Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A tool called “Gauge Reset” is provided for the purpose. See “Gauge Reset” in Chapter 6 for information on using the tool.

Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer. By Operating System You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the battery icon ( when running on battery power or when running on external power) on the taskbar. By Gas Gauge On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge. When the battery pack is not installed in the computer and you want to know the battery charge, you can press the switch with a pointed device to see the corresponding value of indicator segment that light green. The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Switch

Replacing the Battery Pack CAUTION: z There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions. z Do not attempt to disassemble the battery pack. If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1. Turn off the computer and disconnect the AC adapter. 2. Press the two latches toward each other to open the protection cover. 3. Pull the strip and slide the battery pack out of the slot. 4. With the strip facing outward, insert the new battery pack all the way into the slot. 5. Close the cover. Make sure the latches are engaged.

Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Battery Icon Battery Level Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. Low The battery charge has reached the low-battery level (10% by default). Critically low The battery charge has reached the critical battery level (5% by default). By default, Windows will display a notification and put your computer into Hibernation. When the battery is low, the computer’s Battery Charge Indicator ( ) also blinks red to alert you to take actions. Always respond to low-battery by connecting the AC adapter, placing your computer in Hibernation mode, or turning off the computer.

Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What... When... Power to the hard disk is turned off When the hard disk has been idle for a set period. Power to the display is turned off When the display has been idle for a set period. The computer enters the Sleep mode. The hard disk and display are turned off and the entire system consumes less power. When the entire system has been idle for a set period. When you manually activate the mode. The computer enters the Hibernation mode. (See the next subsection for more information.) When the entire system has been idle for a set period. When you manually activate the mode. For detailed information on power management, see Windows’ Help.

Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shuts down. The next time you turn on your computer, you return to exactly where you left off.

Power-Saving Tips Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. z Press the power saving quick button ( ) to enter into power saving mode when using battery power. z Do not disable Power Management. z Decrease the LCD brightness to the lowest comfortable level. z Shorten the length of time before Windows turn off the display. z Many USB devices use power just by being connected. If you use a USB mouse, you can save power by disconnecting the mouse and using the touchpad. If you use a USB flash drive, unplug it when you are not using it. z Remove the card (such as PC card, ExpressCard, and Smart Card) if not using it. z Turn off the wireless radio if you are not using the wireless module (such as WLAN, Bluetooth, or 3G). z Turn off the computer when you are not using it.

Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.

Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Turn off the computer. 2. Plug the monitor’s D-type signal connector to the computer’s VGA connector. 3. Plug one end of the monitor’s power cord into the power socket on the monitor and the other end to an electrical outlet. 4. To use the monitor, turn on the monitor before turning on the computer. 5. The connected device should respond by default. If not, you can switch the display output by pressing the Fn+F5 hot keys. (You can also change the display through Windows Control Panel Æ Display Settings Properties.) CAUTION: Do not disconnect the external monitor while the computer is in the Sleep mode or Hibernation mode. If no external monitor is connected when the computer resumes, the LCD might not display properly.

Connecting a Serial Device Your computer has one or two serial port (depending on model) for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Turn off the computer. 2. Plug the device cable to the serial port on the rear of the computer. 3. Turn on the computer. NOTE: Portable modems that derive power through the serial port cannot be used with the computer. Instead, use a modem that is powered by its own internal battery or external AC power.

Connecting a USB Device Your computer has three USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. NOTE: The eSATA/USB Combo port can also function as a USB port. The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices. To connect a USB device, slide the release latch towards the right to open the port cover and then simply plug the device cable to one of the USB ports.

Connecting an eSATA Device Your computer has an eSATA/USB combo port for connecting eSATA devices (such as an external hard drive and external optical drive) / USB devices (see previous section). The port supports SATA II with transfer rate up o 3.0Gbit/s. It can provide 5V power if a certified USB-eSata combo cable is used. To connect an external eSATA device, simply plug the device cable to the eSATA port.

Connecting an IEEE 1394 Device Your computer has a mini IEEE 1394 port for connecting IEEE 1394 devices that include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR. To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Slide the release latch towards the right to open the connector cover. Then plug the appropriate end of the cable to the computer’s mini IEEE 1394 connector and the other end to the device’s corresponding connector.

Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. z Audio Output Connector (green) can be connected to speakers, headphones, or earphone set. z Microphone Connector (pink) can be connected to an external microphone for recording voice or sound. NOTE: z After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows. z When using the external speakers/headphones or microphone, you cannot use the internal one.

Using Smart Cards Your computer has a smart card slot. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card slot on the right of the computer and open the cover. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot. 3. When a new card is seated, use the third-party smart card software to allow your computer to read it. To remove a smart card: 1. Make sure that the third-party smart card software is not accessing the smart card. 2. Pull the card out of the slot.

Using PC Cards NOTE: z Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card. z Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep mode. Your computer has one PC card slot which supports type II card and CardBus specifications. To insert a PC card: 1. Locate the PC card slot on the right side of the computer. 2. Press the eject button to remove the dummy card out of the slot. 3. Slide the PC card, with its label facing up, into the slot until the eject button pops out. 4. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. Eject button

To remove a PC card: 1. Double-click on the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen. 2. Select (highlight) the PC card from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot. 5. Replace the dummy card.

Using ExpressCards Your computer has an ExpressCard slot. ExpressCard supports the PCI Express and USB 2.0 serial data interfaces (supporting speeds of up to 2.5 Gbps and 480 Mbps respectively), improving speed in data transfer while conserving power usage. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm (ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very extensive range of applications including memory, wired and wireless communication cards, and security devices. Shown next are the appearances of ExpressCards for your reference. ExpressCard/54 ExpressCard/34

To insert an ExpressCard: 1. Locate the ExpressCard slot on the right side of the computer. 2. Slightly push the dummy card to release and then pull it out of the slot. 3. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place. 4. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard: 1. Double-click on the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen. 2. Select (highlight) the ExpressCard from the list to disable the card. 3. Slightly push the card to release and then pull it out of the slot. 4. Replace the dummy card.

Using Storage Cards NOTE: z If your hard disk is divided into several drives, make sure that all drives have been formatted before using the Card Reader. Otherwise, you may encounter problems when using the Card Reader. z You can use only storage cards. Your Card Reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card. Your computer has a storage card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The reader supports MMC (MultiMediaCard), SD (Secure Digital), SDHC (Secure Digital High Capacity), MS (Memory Stick) and MS PRO cards. Shown next are the appearance and size of each card type for your reference. Type MMC SD/SDHC MS/MS PRO Appearance Size (mm) 24×32×1.4 24×32×2.1 21.5×50×2.8

To insert a storage card: 1. Locate the card reader on the left side of the computer and open the cover. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end. 3. Windows will detect the card and assign it a drive name. To remove a storage card: 1. Double-click My Computer. 2. Right-click the drive with the card and select Eject. 3. Slightly push the card to release and then pull it out of the slot.

System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 8 GB on the two 1066/1333 MHz DDR3 SO-DIMM slots. CAUTION: RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules. When inserting or removing a RAM module, do not touch the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing so has been known to cause damage, fire, or electrical shock. To install the RAM module: 1. Remove the battery pack (see chapter 3). 2. Carefully place the computer upside down. 3. Remove the four screws to open the compartment cover.

4. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle (n). Then push down until the retaining clips lock the module into position (o). CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force it. Check once more to ensure that the module is positioned correctly. 5. Replace the compartment cover and secure with four screws. n o

Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. System Recovery reinstalls Windows to your system and configures it to the system’s factory default settings. This chapter tells you how to use the BIOS Setup and System Recovery.

BIOS Setup When and How to Use You need to run BIOS Setup Utility when: z You see an error message on the screen requesting you to run BIOS Setup Utility. z You want to restore the factory default BIOS settings. z You want to modify some specific settings according to the hardware . z You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility, press the F2 key when the prompt appears on the screen during system startup. The prompt shows up on the screen for only a few seconds. You must press F2 quickly. The BIOS Setup Utility main screen appears as shown next. Information Main Advanced Security Boot Exit Model NO: Serial NO: Processor Info: Installed System Memory: SATA HDD: SATA ODD: BIOS Revision: EC Revision: LAN MAC Address: IEEE 1394 GUID: Operating Time: S400 RA7XXS0019 Intel(R) Core(TM) i5 CPU [email protected] 4096MB [SAMSUNG HM321HI] 320GB [Optiarc DVD RW AD-7580S] R0.90.070520A R0.90b 00-22-20-0A-D1-BA 00-40-D0-01-00-48-27-81 295 Hours F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit

In general, you can use the arrow keys to move around and + / – keys to change the setup values. Keyboard information can be found at the bottom of the screen. NOTE: z The BIOS Setup Utility screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ. z The BIOS Setup Utility program may have been updated after the publication of this manual. z The settings you select in your operating system might override similar settings in BIOS Setup Utility. Information Menu The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. Information Main Advanced Security Boot Exit Model NO: Serial NO: Processor Info: Installed System Memory: SATA HDD: SATA ODD: BIOS Revision: EC Revision: LAN MAC Address: IEEE 1394 GUID: Operating Time: S400 RA7XXS0019 Intel(R) Core(TM) i5 CPU [email protected] 4096MB [SAMSUNG HM321HI] 320GB [Optiarc DVD RW AD-7580S] R0.90.070520A R0.90b 00-22-20-0A-D1-BA 00-40-D0-01-00-48-27-81 295 Hours F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit

Main Menu The Main menu contains the various system settings. Information Main Advanced Security Boot Exit System Time: System Date: Legacy USB Support: Wireless LAN: Bluetooth: [ :33:08] [09/08/2010] [Enabled] [Last State] [Last State] Item Specific Help , , or selects field. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit System Time sets the system time. System Date sets the system date. Legacy USB Support enables or disables the system’s support for Legacy USB device in DOS mode. Wireless LAN specifies the on/off state of the wireless LAN radio when the system starts up. When set to Last State, the on/off state remains the same as the last state before you turn off the system. Bluetooth specifies the on/off state of the Bluetooth radio when the system starts up. When set to Last State, the on/off state remains the same as the last state before you turn off the system. 11

Advanced Menu The Advanced menu contains the advanced settings. Information Main Advanced Security Boot Exit USB Power Anytime: X Wake Up Capability: AC Initiation SATA Mode Intel AMT Setup Prompt: X Virtualization Technology Setup: X Button Setup: HDD Preheat: [ ] [Disabled] [AHCI] [Disabled] Item Specific Help Allow the system to charge an external USB device when the system is shutdown or in hibernation. The power source is either external AC power (when connected) or battery power (when AC power is not connected and the battery power is not low). F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit USB Power Anytime allows the system to charge an external USB device when the system is shutdown or in hibernation. The power source is either external AC power (when connected) or battery power (when AC power is not connected and the battery power is not low). Wake Up Capability specifies events for waking up the system from S3 (Sleep) state. Press Enter to access the submenu as shown below. Disabled

Information Main Advanced Security Boot Exit Wake Up Capability: Item Specific Help Any-key Wake Up From S3: Ring Wake-Up From S3 USB Wake-Up From S3 [Disabled] [Disabled] [Disabled] Allow any key to wake up the system from S3 (Sleep) state. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit Any-key Wake Up From S3 allows any key to wake up the system from S3 (Sleep) state. Ring Wake-Up From S3 allows a modem activity to wake up the system from S3 (Sleep) state. USB Wake-Up From S3 allow a USB device activity to wake up the system from S3 (Sleep) state. AC Initiation sets if connecting AC power will automatically start or resume the system. SATA Mode set to AHCI if your hard disk supports AHCI. AHCI allows you to take advantage of Advanced Host Controller Interface features. The options are IDE and AHCI. CAUTION: Incorrect SATA mode settings can result in hard disk drive boot failure. Intel AMT Setup Prompt determines whether the prompt for entering Intel AMT Setup appears or not during POST. If disabled, users cannot enter Intel AMT Setup. Virtualization Technology Setup sets Virtualization Technology parameters. Press Enter to access the submenu as shown below. Disabled

Information Main Advanced Security Boot Exit Virtualization Technology Setup: Item Specific Help Intel(R) Virtualization Technology Vt-d Technology [Disabled] [Disabled] Intel(R) VT (Intel Virtualization Technology) provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit Intel(R) Virtualization Technology enables or disables Intel® VT (Intel Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Vt-d Technology enables or disables VT-d (Intel® Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices. Button Setup sets hardware button related options. Press Enter to access the submenu as shown below. Disabled

Information Main Advanced Security Boot Exit Button Setup: Item Specific Help P1 Function: [Disable d] Define P1 button as Blackout ON/OFF , Quick launch button or Emergency button. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit P1 Function specifies the P1 quick button function. When set to Quick Btn, the P1 quick button serves as a user-defined quick launch key. When set to Emergency Btn, the P1 quick button serves as the Emergency button. “Emergency button” only works with customized applications that support the specific button. HDD Preheat keeps the hard disk drive’s temperature above 5oC (41oF) during system shutdown period as long as external AC power is connected. When set to Enabled, the optional heater will automatically turn on if the hard disk drive’s temperature drops below 5oC (41oF). (The availability of this item depends on your model.) CAUTION: The “HDD Preheat” feature works with low temperature 9-cell battery packs only. Do not use other battery types. Quick Btn

Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Security Boot Exit Supervisor Password Is: User Password Is: Set Supervisor Password: Set User Password Password on boot: X TPM Setup: Intel Trusted Execution Clear Clear [Enter] [Enter] [Disabled] [Disabled] Item Specific Help Supervisor Password controls access to the Setup utility. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit NOTE: z You can set the user password only when the supervisor password has been set. z If both the administrator and user passwords are set, you can enter any of them for starting up the system and/or entering BIOS Setup. However, the user password only allows you to view/change the settings of certain items. z A password setting is applied right after it is confirmed. To cancel a password, leave the password empty by pressing the Enter key. Supervisor/User Password Is shows whether you have set the supervisor/user password or not for the system. Set Supervisor/User Password sets the supervisor/user password. When typing the password, first make sure that Num Lock is off, and then type the password in the entry fields and press Enter. Confirm your password by Enter

typing it again and pressing Enter. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Password on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. TPM Setup sets various TPM parameters. Press Enter to access the submenu as shown below. TPM Support enables or disables TPM (Trusted Platform Module) support. TPM (Trusted Platform Module) is a component on your computer’s mainboard that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks. Current TPM State shows the current TPM state. Change TPM State allows you to select between No Change, Clear, Deactivate & Disable, and Enable & Activate. Information Main Advanced Security Boot Exit TPM Setup Menu Item Specific Help TPM Support Current TPM State: Change TPM State [Enter ] Disabled and Deactivated [No Change ] Enable Trusted Platform Module support F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit Enabled

Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Information Main Advanced Security Boot Exit Boot priority order: 1: USB FDC: 2: SATA ODD: Optiarc DVD RW AD-7580S 3: SATA HDD: SAMSUNG HM321HI 4: USB KEY: 5: USB HDD: 6: LAN BOOT: IBA GE Slot 00C8 v1338 7: 8: Excluded from boot order: : USB CDROM: : PCI: Item Specific Help Keys used to view or configure devices: Up and Down arrows select a device. <+> and <-> moves the device up or down. exclude or include the device to boot. enables or disables a device. <1 – 4> Loads default boot sequence. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a device from which to load the OS. Below is a brief description of keyboard usage: Key Function ↑ , ↓ Selects (highlight) a boot device. +, – Changes the boot sequence. 1 to 4 Loads the default boot sequence. f or r Specifies if the boot device is fixed (f) or removable (r). X Moves the highlighted boot device from the “Boot priority order” list to the “Excluded from boot order” list, and vice versa.

Key Function Shift+1 Deactivates/activates the highlighted boot device on the “Boot priority order” list. When a device has been deactivated, an “!” (exclamation) symbol appears beside the item and system will bypass it when detecting boot device during POST. Exit Menu The Exit menu provides ways of exiting BIOS Setup. After finishing with your settings, you must save and exit so that the changes can take effect. Information Main Advanced Security Boot Exit Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Item Specific Help Exit System Setup and save your changes to CMOS. F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit Exit Saving Changes saves the changes you have made and exits BIOS Setup Utility. Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made. Load Setup Defaults loads the factory default values for all the items. Discard Changes restores the previous values for all the items. Saves Changes saves the changes you have made.

System Recovery Use System Recovery when: z The Windows operating system does not start at all. z You want to restore the system to the factory state. WARNING: z Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost. z Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. To run System Recovery: 1. It is recommended that you connect the AC adapter to ensure power supply throughout the process. 2. During system startup when the following screen appears, press Ctrl + Alt + F2 keys for four second.

3. A message appears asking if you want to start. Type Y to start. 4. A warning message appears asking if you accept the terms as shown on the screen. Type Y to continue. 5. Type Y again when the next message appears asking for confirmation. 6. The recovery process starts. The screen as below appears. 7. Wait till the process completes. A message will appear asking you to press any key to continue. Press any key for the system to restart. 8. The Windows setup wizard starts. Follow the onscreen prompts to continue. 9. When the system restarts, the installer screen as below appears. The installer will perform system hardware detection and driver installation.

10. When completed, the system restarts and displays Windows desktop.

Chapter 6 Using Special Utilities Special utilities are provided for enhanced capabilities and management. This chapter describes how to use these utilities.

Using G-Manager G-Manager is a unified user interface utility that allows you to manage and configure the following: z System z Battery z ECO (economic mode) z Antenna z Monitoring z GPS Status Starting G-Manager You can start up G-Manager by any of the following methods: z Click Start Æ All Programs Æ Getac Utility Æ G-Manager, or z Click and hold the icon located on the taskbar until a ring appears. From the small menu that pops up, click G-Manager. The G-Manager window appears, containing 6 tabs as described later. NOTE: Depending on your model, the actual items appearing on the screen may differ from those shown in this manual.