Panasonic SC-PM33 Operating Instructions Manual

Model No. SC-PM33 Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Note: “EB” on the packaging indicates the United Kingdom. Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same. Your unit may not look exactly as illustrated. RQTV0122-1B E EB GN GCS Table of contents Safety precautions ................................ 2 Caution for AC Mains Lead ................... 3 Placement of speakers .......................... 3 Getting started ....................................... 4 Overview of controls ............................. 6 Discs ....................................................... 7 Cassette tape ......................................... 9 Radio ....................................................... 10 Timer ....................................................... 11 Sound adjustment ................................. 13 External unit ........................................... 13 Troubleshooting guide .......................... 14 Specifi cations ........................................ 15 Maintenance ........................................... 15 SUPPLIED ACCESSORIES SUPPLIED ACCESSORIES Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (As of January 2006). 1 x Remote control (N2QAYB000005) 1 x AC mains lead (For United Kingdom: K2CT3CA00004) 1 x FM indoor antenna (RSA0007-L) (For Australia and N.Z.: K2CJ2DA00010) 1 x Antenna plug adaptor (For United Kingdom: K1YZ02000013) (For others: K2CQ2CA00002) 2 x Remote control batteries 1 x AM loop antenna (N1DAAAA00001) PM33_EB-En.indd 1 PM33_EB-En.indd 1 2/22/06 1:09:16 PM 2/22/06 1:09:16 PM

For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following system. System SC-PM33 Main unit SA-PM33 Speakers SB-PM33 Side of product Inside of product Tuotteen sisällä Produktets innside This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. Laite tulee asettaa lähelle verkkopistorasiaa ja pistokkeen täytyy olla sellaisessa asennossa, että siihen on helppo tarttua ongelman sattuessa. Utstyret bør plasseres i nærheten av AC-stikkontakten, og støpslet må være lett tilgjengelig hvis det skulle oppstå problemer. (For Europe, Australia and N.Z.) THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI LEUDOSSA ILMASTOSSA. DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE KLIMAFORHOLD. (For others) THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES. Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects. Do not place heavy items on the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fi re. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fi re or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug fi rmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock. Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain fl ammable gases which can ignite if sprayed into the unit. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualifi ed persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time. ■ Sales and Support Information (For the United Kingdom and Republic of Ireland) Customer Care Centre • For UK customers: 08705 357357 • For Republic of Ireland customers: 01 289 8333 • Visit our website for product information • E-mail: [email protected] Direct Sales at Panasonic UK • Order accessory and consumable items for your product with ease and confi dence by phoning our Customer Care Centre Monday-Friday 9:00am-5:30pm. (Excluding public holidays) • Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk • Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. • It couldn’t be simpler! • Also available through our Internet is direct shopping for a wide range of fi nished products, take a browse on our website for further details. PM33_EB-En.indd 2 PM33_EB-En.indd 2 2/22/06 1:09:22 PM 2/22/06 1:09:22 PM

Speakers are designed identically so that no left or right channel orientation is necessary. Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Note • Keep your speakers at least 10 mm away from the system for proper ventilation. • These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily infl uenced by magnetism. • To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off. Caution • Use the speakers only with the recommended system. Failure to do so can damage the amplifi er and speakers, and can cause fi re. Consult a qualifi ed service person if damage occurs or if a sudden change in performance is apparent. • Do not attach these speakers to walls or ceilings. – If you see this symbol – Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Caution for AC Mains Lead (For United Kingdom) (“EB” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fi tted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark m or the BSI mark o on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUI T ABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE RE MOVED AND THE PLUG CUT OFF AND DIS POSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRI CAL SHOCK IF THE CUT OFF PLUG IS IN SERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fi tted please observe the wiring code as stated below. If in any doubt please consult a qualifi ed electrician. IMPORTANT The wires in this mains lead are coloured in accor dance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or col oured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red. WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL n OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF—KEEP DRY. Before use Remove the connector cover. How to replace the fuse The location of the fuse differ according to the type of AC mains plug (fi gures A and B). Confi rm the AC mains plug fi tted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver. Fuse cover Figure A Figure B 2. Replace the fuse and close or attach the fuse cover. Fuse (5 ampere) Fuse (5 ampere) Figure A Figure B PM33_EB-En.indd 3 PM33_EB-En.indd 3 2/22/06 1:09:23 PM 2/22/06 1:09:23 PM

- Making the connections Connect the AC mains lead only after all other connections have been made. To household mains socket 3 Connect the speaker cables. 2 Connect the FM indoor antenna. Tape the antenna to a wall or column, in a position with least amount of interference. 1 Connect the AM loop antenna. Stand the antenna up on its base. Keep the loose antenna cord away from other wires and cords. 4 Connect the AC mains lead. FOR THE UNITED KINGDOM ONLY READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION. The included AC mains lead is for use with this unit only. Do not use it with other equipment. Insertion of connector Connector Red (ª) Black (·) Red (ª) Black (·) Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit. Appliance inlet Incorrect connection can damage the unit. AM loop antenna Adhesive tape FM indoor antenna PM33_EB-En.indd 4 PM33_EB-En.indd 4 2/22/06 1:09:26 PM 2/22/06 1:09:26 PM

Optional antenna connections FM outdoor antenna AM outdoor antenna FM outdoor antenna (not included) 75 Ω coaxial cable (not included) AM loop antenna (included) AM outdoor antenna (not included) • Never use an outdoor antenna during a lightning storm. • You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation. • Disconnect the FM indoor antenna if an FM outdoor antenna is installed. • Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location. Step 2 Step 2 - Inserting batteries into the remote control - Inserting batteries into the remote control ■ Batteries • Insert so the poles (+ and –) match those in the remote control. • Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. • Do not use rechargeable type batteries. • Mishandling of batteries in the remote control can cause electrolyte leakage, which may cause a fi re. Do not: • mix old and new batteries; • use different types of batteries at the same time; • heat or expose to fl ame; • take apart or short-circuit; • attempt to recharge alkaline or manganese batteries; • use batteries if their covering has been peeled off. ■ Use Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit. Refer to page 6 for remote control signal sensor position. Step 3 Step 3 - DEMO function - DEMO function When the unit is fi rst plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting “DEMO ON”. Press and hold [7, –DEMO]. The display changes each time the button is held down. While in standby mode, select “DEMO OFF” to reduce power consumption. PM33_EB-En.indd 5 PM33_EB-En.indd 5 2/22/06 1:09:31 PM 2/22/06 1:09:31 PM

Main unit Main unit Refer to the numbers in parentheses for page reference. Top of unit 3 Tuner/Band selection (10) Cassette lid 1 Standby/on switch (y/l) (7, 12) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Disc tray Headphone jack (PHONES) Avoid listening for prolonged periods of time to prevent hearing damage. Plug type: 3.5 mm stereo (not included) Cassette lid open (9) 5 Bass/Treble selection (13) 6 Volume control Recording start/pause (9, 13) 2 Disc play/pause (7, 8, 9) 7 Tape play (9) Disc tray open/close (7, 9) Disc skip/search, tape fast-forward/rewind, tune/ preset channel selection, time adjustment, bass/ treble adjustment Remote control sensor Stop/Demo (5, 7, 8, 9) AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC mains supply. 4 Music port selection (13) Music port jack (13) Display panel Note: It takes a few seconds to turn on the unit after connecting to the AC mains supply. Remote control Remote control Buttons such as 1 function the same as the controls on the main unit. 1 Clock/Timer (11, 12) Play timer/Record timer (12) Numeric (7, 8, 10) Delete (8) Stop (7, 8, 9) Disc skip/search, tape fast-forward/ rewind, tune/preset channel selection, time adjustment, bass/ treble adjustment (7 to 13) Muting Auto off Program (8) Clear (8) Play mode (7, 9, 10) Repeat (8) 3 Enter (8) Surround (13) Display (7, 10) Dimmer Sleep timer (11) 5 Preset EQ (13) 6 2 Album selection (7, 8) 4 7 This function allows you to turn off the unit in disc or tape mode only after left unused for 10 minutes. The setting is maintained even if the unit is turned off. Dims the display panel. Mutes the sound. • Press the button to activate. • Press again to cancel. PM33_EB-En.indd 6 PM33_EB-En.indd 6 2/22/06 1:09:33 PM 2/22/06 1:09:33 PM

2 Press [0] to open the disc tray and then load the disc. Press [0] again to close the tray. Label must face upward Disc tray 3 Press [CD 6] to start play. 4 Adjust the volume. To Action stop the disc Press [ 7 ]. pause play Press [CD 6]. Press again to resume play. skip tracks Press [ /REW/4] or [ /FF/¢]. search through tracks CD Press and hold [ /REW/4] or [ /FF/¢] during play or pause. skip album MP3 Press [ALBUM or ] in the play mode. Press [ALBUM or ] once and then the numeric buttons in the stop mode. Play Mode function Play Mode function CD MP3 1 Press [CD 6]. 2 Press [PLAY MODE] to select the desired mode. Mode To play 1-TRACK 1TR one selected track on the disc. Press the numeric buttons to select the track. 1-ALBUM 1ALBUM MP3 one selected album on the disc. Press [ALBUM or ] to select the album. RANDOM RND a disc randomly. 1-ALBUM RANDOM 1ALBUM RND MP3 all tracks in one selected album randomly. Press [ALBUM or ] to select the album. Note • During RANDOM or 1-ALBUM RANDOM play, you cannot skip to tracks that have been played. • The current play mode is cleared when you change a disc or open the disc tray. CD • During RANDOM play, you can search backward or forward only within the current track. Display function Display function This function allows you to display the information of the current track. Press [DISPLAY] repeatedly during play or pause mode. CD Elapsed play time Remaining play time MP3 Elapsed time Album name Track name ID3 (Artist) ID3 (Track) ID3 (Album) Note • Maximum number of displayable characters: approximately 30 • This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not be displayed. • ID3 is a tag embedded in MP3 tracks to provide information about the track. PM33_EB-En.indd 7 PM33_EB-En.indd 7 2/22/06 1:09:35 PM 2/22/06 1:09:35 PM

Direct access play This function allows you to start play from a specifi c track. CD Press the numeric buttons to select and play your desired track. MP3 1 Press [ALBUM or ] to select the album. 2 Press [ /FF/¢] once and then the numeric buttons to select and play your desired track. For two-digit track, press [h10] once, and then the two digits. For three-digit track, press [h10] twice, and then the three digits. Note This function does not work during any random/program mode. Repeat play Repeat play You can repeat program play or other selected play mode. CD MP3 Press [REPEAT] before or during play. “REPEAT ON” and “ ” are displayed. To cancel Press [REPEAT] again. “REPEAT OFF” is displayed and “ ” is cleared. Program play Program play This function allows you to program up to 24 tracks. CD 1 Press [CD 6] and then [ 7 ]. 2 Press [PROGRAM]. 3 Press the numeric buttons to select your desired track. Repeat this step to program other tracks. Example: Track number Program number Program indicator 4 Press [CD 6] to start play. MP3 1 Press [CD 6] and then [ 7 ]. 2 Press [PROGRAM]. 3 Press [ALBUM or ] to select your desired album. 4 Press [ /FF/¢] once and then the numeric buttons to select your desired track. Example: Album number Track number 5 Press [ENTER]. Repeat steps 3 to 5 to program other tracks. 6 Press [CD 6] to start play. To Action cancel program mode Press [PROGRAM] in the stop mode. replay the program Press [PROGRAM] then [CD 6]. check program contents Press [ /REW/4] or [ /FF/¢] when “PGM” is displayed in the stop mode. To check while programming, press [PROGRAM] twice after “PGM” appears, then press [ /REW/4] or [ /FF/¢] . add to the program CD Repeat step 3 in the stop mode. MP3 Repeat steps 3 to 5 in the stop mode. clear the last track Press [DEL] in the stop mode. clear all programmed tracks Press [CLEAR] in the stop mode. “CLR ALL” is displayed. Note • When you try to program more than 24 tracks “PGM FULL” appears. • The program memory is cleared when you open the disc tray. CD • During program play, you can search backward or forward only within the current track. Note • This unit can play MP3 fi les and CD-DA format audio CD-R/RW that have been fi nalized. • It may not be able to play some CD-R/RW depending on the condition of the recording. • Do not use irregularly shaped discs. • Do not use discs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. • Do not attach extra labels or stickers on the disc. • Do not write anything on the disc. CD • This unit can access up to 99 tracks. • Choose a CD with this mark: Using DualDiscs The “CD” sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit. MP3 • Files are treated as tracks and folders are treated as albums. • This unit can access up to 999 tracks, 255 albums and 20 sessions. • Disc must conform to ISO9660 level 1 or 2 (except for extended formats). • To play in a certain order, prefi x the folder and fi le names with the 3-digit numbers in the order you want to play them. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. PM33_EB-En.indd 8 PM33_EB-En.indd 8 2/22/06 1:09:38 PM 2/22/06 1:09:38 PM

Basic play Basic play 1 Press [0] on top of the unit. Insert the cassette. " Insert inside the guides Forward side 2 Close the lid by hand. 3 Press [TAPE 3] to start play. To play the other side of the cassette, turn the cassette over. To Action stop tape playback Press [ 7 ]. start one-touch play Press [TAPE 3] when the unit is OFF with the cassette loaded. fast-forward and rewind Press [ /REW/4] or [ /FF/¢] in the stop mode. Note • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Endless tapes can get caught up in the deck’s moving parts if used incorrectly. TPS (Tape Program Sensor) TPS (Tape Program Sensor) This function enables you to search the beginning of a track, up to a maximum of 9. Press [ /REW/4] or [ /FF/¢] during play. Play resumes from the track found. Note TPS may not function properly: • with short silent parts • when noise occurs between tunes • if silent parts are found within tunes Recording Recording Use normal position tapes. High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly. Preparation Wind the leader tape so that recording can begin immediately. Recording the radio Recording the radio 1 Insert the cassette to be recorded. 2 Tune to the required station (refer to page 10). 3 Press [¶ REC/8] to start recording. Recording discs Recording discs 1 Insert the cassette to be recorded. 2 Press [0] to insert the disc. Press again to close. 3 Press [CD 3/8] and then [7, –DEMO]. 4 Press [PLAY MODE] to select your desired mode (refer to page 7). 5 Press [¶ REC/8] to start recording. Recording programmed tracks Recording programmed tracks 1 Insert the cassette to be recorded. 2 Program the tracks you want (refer to page 8). 3 Press [¶ REC/8] to start recording. Other basic operations Other basic operations To Action stop recording Press [ 7 ]. stop recording temporarily 1) Press [¶ REC/8]. 2) Press again to resume recording. record on the other side of the tape Turn the cassette over and press [¶ REC/8]. erase a recorded sound 1) Insert the cassette to be recorded. 2) Press [TAPE 3] and then [7, –DEMO]. 3) Press [¶ REC/8]. Your attention is drawn to the fact that recording pre- recorded tapes or discs or other published or broadcast material may infringe copyright laws. Erasure prevention Erasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown. Side A Tab for side A Tab for side B To re-record Normal tape Adhesive tape PM33_EB-En.indd 9 PM33_EB-En.indd 9 2/22/06 1:09:41 PM 2/22/06 1:09:41 PM

2 Press [PLAY MODE] to select “MANUAL”. 3 Press [ /REW/4] or [ /FF/¢] to select the frequency of the required station. “ ST ” is displayed when a stereo FM broadcast is being received. To tune automatically Press [ /REW/4] or [ /FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station. • Auto tuning may not function when there is excessive interference. • To cancel auto tuning, press [ /REW/4] or [ /FF/¢] once again. To improve FM sound quality To improve FM sound quality Press and hold [PLAY MODE] to display “MONO”. To cancel Press and hold [PLAY MODE] again until “MONO” disappears. • MONO is also cancelled if the frequency is changed. • Turn off “MONO” for normal listening. RDS broadcasting (For Europe) RDS broadcasting (For Europe) Enable you to display the name of a broadcasting station or a program type. Press [DISPLAY] to display: Station Name (PS) Program Type (PTY) Frequency display RDS displays may not be available if reception is poor. Program type displays NEWS VARIED FINANCE COUNTRY AFFAIRS POP M CHILDREN NATIONAL INFO ROCK M SOCIAL A OLDIES SPORT M.O.R.M RELIGION FOLK M EDUCATE LIGHT M PHONE IN DOCUMENT DRAMA CLASSICS TRAVEL TEST CULTURE OTHER M LEISURE ALARM SCIENCE WEATHER JAZZ M.O.R.M = “Middle of the road music” Memory preset Memory preset Up to 15 stations can be set in both the FM and AM bands. Preparation Press [TUNER/BAND] to select “FM” or “AM”. Automatic presetting Automatic presetting Press and hold [PROGRAM] to start presetting. Manual presetting Manual presetting 1 Press [PLAY MODE] to select “MANUAL”. 2 Press [ /REW/4] or [ /FF/¢] to tune to the required station. 3 Press [PROGRAM]. 4 Press numeric buttons to select a channel. The station occupying a channel is erased if another station is preset in that channel. 5 Repeat steps 2 to 4 to preset more stations. Selecting a preset station Selecting a preset station Press numeric buttons to select the channel. For channels 10 to 15 press [h10], then the two digits. OR 1 Press [PLAY MODE] to select “PRESET”. 2 Press [ /REW/4] or [ /FF/¢] to select the channel. AM allocation setting AM allocation setting By main unit only This system can also receive AM broadcasts allocated in 10 kHz steps. To change the step from 9 kHz to 10 kHz 1 Press and hold [TUNER/BAND]. After a few seconds the display changes to a fl ashing display of the current minimum frequency. 2 Continue to hold down [TUNER/BAND]. • When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. • After the setting is changed, any previously preset frequency will be cleared. PM33_EB-En.indd 10 PM33_EB-En.indd 10 2/22/06 1:09:43 PM 2/22/06 1:09:43 PM

Setting the clock This is a 24-hour clock. 1 Press [CLOCK/TIMER] to select “CLOCK”. Each time you press the button: CLOCK ˚ PLAY Original display ˚ REC 2 Within 5 seconds, press [ /REW/4] or [ /FF/¢] to set the time. 3 Press [CLOCK/TIMER] again to confirm. Displaying the clock Press [CLOCK/TIMER] to display the clock for few seconds. Note The clock may lose or gain minutes over a period of time. Readjust as necessary. Using the sleep timer Using the sleep timer This function enables you to turn off the unit automatically after the set time. Press [SLEEP] repeatedly to select your desired time. Sleep timer indicator To cancel Press [SLEEP] to select “OFF”. Changing the remaining time Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time. Note • The play and sleep timer or the record and sleep timer can be used together. • The sleep timer always has priority. Be sure not to overlap timer settings. PM33_EB-En.indd 11 PM33_EB-En.indd 11 2/22/06 1:09:45 PM 2/22/06 1:09:45 PM

Using the play or record timer You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or music port source (record timer). Preparation Turn the unit on and set the clock (refer to page 11). Timer Action Play timer Prepare the music source you want to listen to; cassette, disc, radio or music port source, and set the volume. Record timer Check the cassette’s erasure prevention tabs (refer to page 9), insert the cassette (refer to page 9) and tune to the radio station (refer to page 10) or select the music port source (refer to page 13). 1 Press [CLOCK/TIMER] repeatedly to select your desired timer. CLOCK ˚ PLAY Original display ˚ REC 2 Within 5 seconds, press [ /REW/4] or [ /FF/¢] to set the starting time. Play timer indicator Start time Record timer indicator 3 4 Press [CLOCK/TIMER] to confirm. Repeat steps 2 and 3 to set the finishing time. Finish time To activate the timer 5 Press [˚PLAY/REC] to turn on your desired timer. ˚ PLAY no display (off) ˚ REC 6 Press [y] to turn off the unit. The unit must be off for the timers to operate. Other basic operations Other basic operations To Action change the settings Repeat steps 1 to 4 and 6. change the source or volume 1) Press [˚PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Perform steps 5 and 6. check the settings (when the unit is on or in standby mode) Press [CLOCK/TIMER] repeatedly to select ˚PLAY or ˚REC. cancel Press [˚PLAY/REC] to clear the timer indicators from the display. Note • The play timer and record timer cannot be used together. • The play timer will start at the preset time, with the volume increasing gradually to the preset level. • The record timer will start 30 seconds before the set time, with the volume muted. • The timer comes on at the set time every day if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated. • If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.) PM33_EB-En.indd 12 PM33_EB-En.indd 12 2/22/06 1:09:48 PM 2/22/06 1:09:48 PM

Selecting sound effects You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect. Preset EQ Preset EQ Press [PRESET EQ] repeatedly to select your desired setting. HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF Setting Effect HEAVY Adds punch to rock CLEAR Clarifi es higher frequencies SOFT For background music VOCAL Adds gloss to vocal EQ-OFF No effect Bass or treble Bass or treble Enable you to enjoy the lower or higher pitch sound. 1 Press [BASS/TREBLE] repeatedly to select your desired setting. BASS TREBLE original display Setting Effect BASS For lower pitch sound TREBLE For higher pitch sound 2 Press [ /REW/4] or [ /FF/¢] to adjust the level. Note The tone level can be varied within -4 to +4. Enjoying surround sound Enjoying surround sound Enable you to add natural width and depth to the stereo sound. To activate Press [SURROUND] to display “ ” indicator. To cancel Press [SURROUND] again to clear “ ” indicator. Note • Surround sound is less discernible when listening through headphones. • If interference in FM stereo reception increases, cancel the surround sound effect. External unit Playing from portable audio Playing from portable audio e equipment quipment Switch off the equalizer function (if there is any) of the portable audio equipment before you plug into the MUSIC PORT jack. Otherwise, sound from the speaker may be distorted. 1 Plug the audio cord into the MUSIC PORT jack and press [MUSIC PORT]. 2 Play the portable audio equipment. (See the portable audio equipment’s instruction manual.) Note All peripheral components and cables are sold separately. Recording from portable audio Recording from portable audio equipment quipment 1 Insert the cassette to be recorded. 2 Press [MUSIC PORT]. 3 Play the portable audio equipment. 4 Press [¶ REC/8] to start recording. Note For other recording operations, refer to page 9, “Other basic operations”. Connecting to a portable audio Connecting to a portable audio equipmen equipment This feature enables you to enjoy music from portable audio equipment. Audio cord (not included) Portable audio equipment (not included) PM33_EB-En.indd 13 PM33_EB-En.indd 13 2/22/06 1:09:49 PM 2/22/06 1:09:49 PM

listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer. Common problems No sound. Turn the volume up. The speaker cords may not be connected properly. Turn the unit off, check and correct the connections and turn the unit on (refer to page 4). Sounds unfi xed, reversed or come from one speaker only. Check the speaker connections (refer to page 4). Humming heard during play. An AC mains lead or fl uorescent light is near the cables. Keep other appliances and leads away from this unit’s cables. If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s polarity. “ERROR” is displayed. Incorrect operation performed. Read the instructions and try again. “- -:- -” appears on the display. You plugged the AC mains lead in for the fi rst time or there was a power failure recently. Set the time (refer to page 11). “F76” is displayed. Check and correct the speaker cord connections (refer to page 4). If this does not fi x the problem, there is a power supply problem. Consult the dealer. Listening to the radio Noise is heard. The stereo indicator fl ickers or doesn’t light. Sound is distorted. Use an outdoor antenna (refer to page 5). A beat sound is heard. Turn the TV off or separate it from the unit. A low hum is heard during AM broadcast. Separate the antenna from other cables and cords. An AM broadcast station cannot be picked up clearly. Frequency step is set to 10 kHz. Change the frequency step to 9 kHz (refer to page 10). When there is a television set nearby The picture on the TV disappears or stripes appear on the screen. The location and direction of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna (refer to page 5). The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit. Using the cassette deck Recording is not possible. If the erasure prevention tabs have been removed, cover the holes with adhesive tape (refer to page 9). Playing discs The display is wrong or play won’t start. The disc may be upside down (refer to page 7). Wipe the disc. Replace the disc if it is scratched, warped, or non-standard. Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again. The remote control Remote control doesn’t work. Check that the batteries are inserted correctly (refer to page 5). Replace the batteries if they are worn. PM33_EB-En.indd 14 PM33_EB-En.indd 14 2/22/06 1:09:51 PM 2/22/06 1:09:51 PM

simultaneously 10 % Total harmonic distortion 20 W per channel (6 Ω) PMPO output power (For South East Asia only) 430 W Input impedance MUSIC PORT 250 mV 12 kΩ Output impedance HEADPHONE 16 to 32 Ω Phone jack Terminal Stereo, 3.5 mm Music Port input jack Terminal Stereo, 3.5 mm FM TUNER SECTION Frequency range 87.50 to 108.00 MHz (50 kHz step) Sensitivity 3.8 µV (IHF) S/N 26 dB 1.2 µV Antenna terminal(s) 75 Ω (unbalanced) Preset station FM 15 stations AM 15 stations AM TUNER SECTION Frequency range 522 to 1629 kHz (9 kHz steps) 520 to 1630 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 999 kHz) 1122 µV/m CASSETTE DECK SECTION Track system 4-track, 2-channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erase system AC erase 100 kHz Tape speed 4.8 cm/s Overall frequency response (+3, -6 dB) at DECK OUT Normal 35 Hz to 14 kHz S/N RATIO 47 dB (A weighted) Wow and fl utter 0.08 % (WRMS) Fast-forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Disc played [8 cm or 12 cm] (1) CD-Audio (CD-DA) (2) CD-R/RW (CD-DA, MP3 formatted disc) (3) MP3 Sampling frequency CD 44.1 kHz MP3 32 kHz, 44.1 kHz, 48 kHz Bit rate MP3 32 kbps to 384 kbps Decoding 16/20/24 bit linear Pickup Beam source Semiconductor laser Wavelength 785 nm Laser power CLASS 1 (For Norge) Bølgelengde 785 nm Laserstyrke Ingen farlig stråling sendes ut Audio output (Disc) Number of channels 2 channel Frequency response 20 Hz to 20 kHz (+1, -2 dB) Wow and fl utter Below measurable limit Digital fi lter 8 fs D/A converter MASH (1 bit DAC) SPEAKER SECTION Type 2 way, 2 speaker system Speaker(s) FULL RANGE 10 cm twin cone type 6 Ω TWEETER Piezo type Impedance 6 Ω Input power (IEC) 20 W (MAX) Output sound pressure 83 dB/W (1.0 m) Frequency range 70 Hz to 17 kHz (-16 dB) 85 Hz to 15.5 kHz (-10 dB) Dimensions (W x H x D) 138 x 227 x 141 mm Mass 1.3 kg GENERAL Power supply For Continental Europe AC 230 V, 50 Hz For United Kingdom, Australia and N.Z. AC 230 to 240 V, 50 Hz For South East Asia AC 220 to 240 V, 50/60 Hz Power consumption 63 W Dimensions (W x H x D) 165 x 227 x 327 mm Mass 3.5 kg Operating temperature range +5 to +35˚C Operating humidity range 5 to 90 % RH (no condensation) Power consumption in standby mode 0.8 W Note 1. Specifi cations are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. Maintenance If the surfaces are dirty If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner, crisper sound For a cleaner, crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). PM33_EB-En.indd 15 PM33_EB-En.indd 15 2/22/06 1:09:52 PM 2/22/06 1:09:52 PM

Web Site: http://www.panasonic.co.jp/global/ RQTV0122-1B L0106CH1026 En CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION! • DO NOT INSTALL OR PLACE THIS UNIT IN A BOOK CASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. • DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. • DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. • DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. SUOMI VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTIS TAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄ VÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. VAROITUS! • ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA KABINET TITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN SULJET TUUN TILAAN, JOTTA TUULETUS ONNISTUISI. VAR MISTA, ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI TU LIPALOVAARA. • ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI MUULLA VASTAAVALLA ESINEELLÄ. • ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE. • HÄVITÄ PARISTOT LUONTOA VAHINGOITTAMATTOMALLA TAVALLA. VAROITUS: TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE, VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE. NORSK ADVARSEL! DETTE PRODUKTET ANVENDER EN LASER. BETJENING AV KONTROLLER, JUSTERINGER ELLER ANDRE INNGREP ENN DE SOM ER BESKREVET I DENNE BRUKSANVISNING, KAN FØRE TIL FARLIG BE STRÅLING. DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å RE PARERE APPARATET PÅ EGENHÅND. ALT SERVICE OG REPARASJONSARBEID MÅ UTFØRES AV KVALIFI SERT PERSONELL. ADVARSEL! • APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET INNEBYGGET KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTIL STREKKELIGE. SØRG FOR AT GARDINER ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOL DENE, SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV OVERHETING UNNGÅS. • APPARATETS VENTILASJONSÅPNINGER MÅ IKKE DEKKES TIL MED AVISER, BORDDUKER, GARDINER OG LIGNENDE. • PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS, OPPÅ APPARATET. • BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR MILJØET. ADVARSEL: FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN, SLIK SOM BLOMSTERVASER, OPPÅ APPARATET. PM33_EB-En.indd 16 PM33_EB-En.indd 16 2/22/06 1:09:52 PM 2/22/06 1:09:52 PM