Gibson Dark Fire System Owner's Manual

Function: 37 Name: Set Powerhead Speed for all Powerheads Purpose: Set the maximum speed for all Powerheads Factory Default: 5 Clickstream: 37#5# Here you can set the maximum speed of all Powerheads at once. Function: 38 Name: Set Powerhead Acceleration for all Powerheads Purpose: Set the acceleration for all Powerheads at once. Factory Default: 5 Clickstream: 38#5# Function: 99 Name: Display Software Version Purpose: Displays the actual software version of the body. Clickstream: 99# Function: 101 Name: Reset Configuration Data Purpo ...

Function: 24 Name: PEQ Gain for right channel (Piezo) Purpose: Configure 4 PEQ Gain for Piezo Factory Default: depends on Sound Clickstream: 24#CoilConfigNr#BandNr#GainData Configure the right channel, Band1 Gain of PEG for Gibson Classic sound 24#0#1#0 You need the configuration tool which calculates the correct GainData Function: 30 Name: Set Stepper Speed Purpose: Set the maximum speed for each Powerhead individually Factory Default: 5 Clickstream: 30#1#5# You can set the maximum speed of each Powerhead individually. F ...

setup by shining the LED that corresponds to your selected tuning, and then the first initial of the Chameleon tone setup name. All of these tones can be modified by turning the tone knobs and changing the position of the 3 position toggle switch. [Do we also intend for the customer to do pickup coil switching et. al.?-sm] Charge Level Display Your Dark Fire guitar should be able to perform up to 500 tunings without needing recharging. You can check the level of charge in Dark Fire’s on-boa ...

20#7#2# This is exact what happens, when you select preset-E from green bank, activate Chameleon Mode, rotate MCK to LED-A and store the sound with a long click. Function: 21 Name: PEQ Settings for left channel (Pickups) Purpose: Configure 4 Bank EQ for Pickups Factory Default: depends on Sound Clickstream: 21#CoilConfigNr#BandNr#ConfigData Configure the left channel, Band1 of PEG for Gibson Classic sound 21#0#1#16 You need the configuration tool which calculates the correct ConfigData. Function: 22 Name: P ...

Eb Bb Eb G Bb eb 12. e – Open D: D A D F# B D Red Bank (Low Tunings) 13. E – E Flat: Eb Ab Db Gb Bb eb 14. A – D: D G C F A D 15. D – C#: C# F# B E G# C# 16. G – C: C F Bb Eb Gb C 17. B – B: B E A D F# B 18. e – Dropped Db: Db Ab Db Gb Bb eb Note: When using extremely low tunings, such as no. 16 “C” or no. 17 “B”, use heavier gauge strings (e.g., .013” to .062”) for best results. If you do change to heavy gauge strings this way, do NOT use the Green and Blue Bank presets as you may risk damage to Dark Fire. You can store your own Custom Altered ...

Purpose: Setup up Powerhead Runtime Correction Factory Default: 1 (on) Clickstream: 8#0# to 8#1# If you activate Runtime Correction the movements of the Powerheads are monitored and a correction is calculated. It takes up to 10 tunings before the Powerhead movement fits to the string gauge. Function: 9 Name: E-Function Correction Purpose: Enhancing Tuning Factory Default: 1 (on) Clickstream: 9#0# to 9#1# If you activate E-Function Correction the frequency detection integrates the amplitude of the string during pitch detection. If you switch it off you shoul ...

Tuning Preset 7 Tuning Preset 13 A Tuning Preset 2 Tuning Preset 8 Tuning Preset 14 D Tuning Preset 3 Tuning Preset 9 Tuning Preset 15 G Tuning Preset 4 Tuning Preset 10 Tuning Preset 16 B Tuning Preset 5 Tuning Preset 11 Tuning Preset 17 e Tuning Preset 6 Tuning Preset 12 Tuning Preset 18 Revolving Arrow Single String Up Mode String Up Mode String Down Mode #b Bank Selection Bank Selection Bank Selection Enter Setup Mode Enter Setup Mode Enter Setup Mode A440 Hz Standard Tuning In any bank, turning to the Peg symbol and momentarily pressing the display will activate Standar ...