Soleus Air KFHHP-22 Operating And Installation Manual

Operation and Maintenance ◆ Instructions before Use Carefully read the following instructions before use Warning ★Do not use flammable liquids on or near this air conditioner. ★Touching metal parts after removing filter can cause an electric shock. ★Do not use for long periods of time if the humidity is high. Condensation may be present. ★Don’t operate the air conditioner with web hands. It can cause an electric shock. ★Do not insert your hands or any other object into the air intake or outlets. ★If your air conditioner malfunctions, discontinue use and cal ...

◆Installation Location Indoor Unit 1. The inlet and outlet should not be covered so that the outflow air can reach all parts of the room. 2. Install in a location from which the condensation water can be drained out conveniently. 3. Avoid a location where there is heat source, steam or flammable gas. 4. Install in a location where is strong enough to withstand the full weight and vibration of the unit. 5. Be sure that the installation conforms to the installation dimension diagram. 6. Be sure to leave enough space to allow access for routine maintenance. The height of t ...

◆Instructions before Use ★Don’t attempt to repair the air conditioner by yourself. There are no user replaceable parts. Please contact your authorized dealer. ★Always use new batteries in your remote. Never mix batteries. ★Be sure to turn the power off when not using the air conditioner for a long time. ★Never store flammable liquids near your air conditioner. ★The condensing unit should be securely mounted to avoid damage. ★Don’t step on the top of the outdoor unit. ★Don’t block the air intake or outlet vents of both the outdoor and indoor unit. It ...

34BL 30YE/GN 29YE/GN BETWEEN P AND N OF IPM,PLEASE DON'T TOUCH MINUTES OR THE VOLTAGE LESS THAN 50V WHEN THE UNIT IS RUNNING OR STOPED IN 2 3 2 N(1) 31BN 32OR 33RD KM RELAY YE WH BL BN S C(T) R 26YE/GN 9VT C1 0 0 0 W2 W3 W1 10BK 17BL 16BN S1 24WH 23WH 27YE/GN 28YE/GN AP2 AP3 13BN 12BN 14BK 15BL 11WH 7BN 8BL 5RD 6BL 3BN 4BL 1BN 2BL AP1 L1 L2 25YE/GN COMP. 22RD 21BL 20YE 19RD 18BK N N P PR A ...

◆Installation Install the Power Line 1. Remove the front side plate. 2. Break through the hole for wires and put on the rubber bushing. 3. Pull all wires through the rubber bushing. 4. Remove the wire clamp and connect the end of the power connection cord with screws to the wiring terminal board according to the “WIRING DIAGRAM” of the outdoor unit. 5. Make sure that the wiring has been connected properly. 6. Tighten the wire with clamp and clasp. 7. After the wiring crosses through the Connector, tighten the Connector with the fix nut. Install the Indoor Unit 1. Wh ...

◆Installation Install the Power Line 1. Remove the front side plate. 2. Break through the hole for wires and put on the rubber bushing. 3. Pull all wires through the rubber bushing. 4. Remove the wire clamp and connect the end of the power connection cord with screws to the wiring terminal board according to the “WIRING DIAGRAM” of the outdoor unit. 5. Make sure that the wiring has been connected properly. 6. Tighten the wire with clamp and clasp. 7. After the wiring crosses through the Connector, tighten the Connector with the fix nut. Install the Indoor Unit 1. Wh ...

◆Installation Location Indoor Unit 1. The inlet and outlet should not be covered so that the outflow air can reach all parts of the room. 2. Install in a location from which the condensation water can be drained out conveniently. 3. Avoid a location where there is heat source, steam or flammable gas. 4. Install in a location where is strong enough to withstand the full weight and vibration of the unit. 5. Be sure that the installation conforms to the installation dimension diagram. 6. Be sure to leave enough space to allow access for routine maintenance. The height of t ...