Sonance SM55 Specification Sheet

Specifications: SM55 Tweeter: 1" (25mm) Silk dome, Ferrofluid- cooled Woofer: 5¼" (133mm) Carbon fiber cone, with a rubber surround Frequency Response: 65Hz – 20kHz ±3dB Impedance: 8 ohms nominal; 6 ohms minimum Power Handling: 5 watts minimum; 60 watts maximum Sensitivity: 88dB SPL (2.83V/1 meter) Grille Material: Perforated Aluminum Dimensions (W x H x D): 10¾" x 10¾" x 2½" (273mm x 273mm x 63.5mm) Shipping Weight: 9 lbs (4.1kg) pair Features: • Low-profile on-ceiling design is ideal for installations that cannot accommodate flush-mount in-ceiling speakers. • Extremely simple installation: Connect the mount- ing plate to speaker wire and screw the mounting plate to the J-box. The speaker attaches to the mounting plate via powerful neodymium magnets. • The rotating mounting plate allows the SM55 to be aligned with lighting fixtures or other decor features after installation. • A new coaxial woofer/tweeter produces smoother frequency response, improves stereo imaging and reduces tonal variations caused by less-than-ideal placement. • The dome-shaped speaker baffle surface ensures a wide coverage area. • The dense polypropylene enclosure absorbs vibrations, for uncolored sound. • The perforated aluminum grille and its ABS plastic frame are paintable in one easy step to match the decor. The new Sonance SM55 surface-mount speaker is the perfect solution for those who demand quality sound but cannot use flush-mount in-ceiling speakers. In the SM55, Sonance engineers have created a speaker that sounds great, yet is decor-friendly, very easy to install and doesn’t require a mounting hole. The clever mounting system allows the SM55 to be installed in a matter of minutes, using only a screwdriver. A mounting plate receives the speaker connections from the amplifier, and then attaches to a standard in-ceiling J-box via two screws. As the installer places the SM55’s bottom surface against the mounting plate, six powerful neodymium magnets on the SM55’s bottom surface securely attaches it to the mounting plate — that’s all there is to it. Once installed, the installer can rotate the speaker to align it with other features of the room’s decor. A new coaxial woofer/tweeter driver featuring a 5¼” carbon fiber cone woofer and a 1” silk dome tweeter guarantees high-quality reproduction of music and voices. The driver’s coaxial design reduces tonal colorations and improves stereo imaging, providing excellent sound quality, even when the speakers must be mounted in less-than- ideal locations. The SM55’s enclosure has a low-profile domed shape, ensuring that the speaker’s sound covers as wide an area as possible. The enclosure is fabricated from a dense polypropylene material that absorbs vibrations, reducing resonances and improving sonic clarity. The perforated aluminum grille and its ABS support frame (which completely cover the speaker) can be painted to match the decor in a one-step process that saves time compared to traditional flanged speakers. SONANCE SM55 SURFACE-MOUNT SPEAKER WITH GRILLE (LEFT); WITHOUT GRILLE (RIGHT)

San Clemente, CA 92672-7531 USA (800) 582-7777 or (949) 492-7777 FAX: (949) 361-5151 Technical Support: (800) 582-0772 WWW.SONANCE.COM ®2007 Sonance, All Rights Reserved. Sonance is a registered trademark of Dana Innovations. Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product information, go to: www.sonance.com 10/07 10¾” (273mm) 10¾” (273mm) 10¾” (273mm) 2½” (63.5mm) Dimensions: Sonance SM55 Surface-Mount Speaker Limited Lifetime Warranty: Sonance warrants to the original retail purchaser only that this Sonance product will be free from defects in materials and workmanship, provided the product was purchased from a Sonance Authorized Dealer. For full warranty information, please see Instruction Manual. Mounting Plate (installed on ceiling) SM55 Speaker (back side) Neodymium Magnets Terminal Connections Installation Example: