Sonifex S1 User Handbook Manual

2 USER GUIDE USER GUIDE Dim / Mute When a channel with the monitor mute option configured has PFL selected, the control room monitors can be set to either dim or mute. If the fader is then opened, the monitors will mute irrespective of this setting. The red mute LED will still illuminate if the monitors are set to DIM rather than MUTE on PFL. Meter Controls Program / Meters Follow Monitors The PGM / MFM Button selects whether the meters should display PGM only or display the selection that is heard in the presenters headphones. The selection of this button can be locked ...

33 4 ADVANCED CONFIGURATIONS ADVANCED CONFIGURATIONS • Start from CUE/PFL & ON - Aswell as the start signals being generated when the channel is live, a start pulse can be configured to be sent when the CUE/PFL button is pressed. This option would allow the automatic start of a cd player for example, when the presenter prefades that particular channel. • Telco Mode with CUE/PFL - This operates the same as the telco mode except the CUE/PFL button can also generate start and stop remote signals Momentary/Continuous Each remote output can be configured to operate in momentar ...

39 4 ADVANCED CONFIGURATIONS ADVANCED CONFIGURATIONS Stop Function: This sets whether the Stop function is continuous (remains active) or momentary (active for a approximately half a second). Please note, microphone inputs on channels 1-5 have no stop function. Tally Back Telco Tally: Enable/ disable the Telco Tally Back input. If enabled, a GPI must be configured to perform this task and the Remote Mode must be set to a Telco Mode Automation Tally: Enable/ disable the Automation Tally Back input. If enabled a GPI must be configured to perform this task. ON Button Mode This al ...

53 7 DEFAULT SETTINGS DEFAULT SETTINGS Function Options Channel 1,2,5 Channel 3,4 Channel 6-10 Remote Input A See RMA: Command Mode for Input 1 Start from ON & Fader Up Start from ON & Fader Up Start from ON & Fader Up Start Operation for Input 1 Continuous Start Continuous Start Momentary Start Stop Operation for Input 1 (a GPO must be configured to use a Mic Remote Stop on channels 1-5) Continuous Stop Continuous Stop Momentary Stop Input 1 Tally Back (GPI required) Disabled Disabled Disabled Input 1 Auto Tally Back (GPI required) Disabled Disabled Disabled Remote for Line I ...

21 3 MIXER APPLICATIONS MIXER APPLICATIONS 3 Mixer Applications The following section will show you how to setup and use the mixer for most standard applications. It is intended as a quick ‘how to’ guide to get you up and running as quickly and efficiently as possible. If you are already comfortable with setting up the mixer, please move on to the next chapter – Advanced Configuration to learn how to further configure your desk and get the most from your equipment. Before reading this section it is recommended that you familiarise yourself with all the different types o ...

v WARRANTY & SAFETY INFORMATION WARRANTY & SAFETY INFORMATION WEEE & RoHS Directives - Sonifex Statement The Waste Electrical and Electronic Equipment (WEEE) Directive was agreed on 13 February 2003, along with the related Directive 2002/95/EC on Restrictions of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS). The Waste Electrical and Electronic Equipment Directive (WEEE) aims to minimise the impacts of electrical and electronic equipment on the environment during their life times and when they become waste. It applies to a huge spectrum o ...