Sony BDP-S350 - Blu-Ray Disc Player Operating Instructions Manual

to the Internet via a network cable. Enter the respective (alphanumeric) values for your broadband router or Wireless LAN router. The items that need to be set may differ, depending on the Internet service provider or the router. For details, refer to the instruction manuals that have been provided by your Internet service provider or supplied with the router. 1 Select “Internet Settings” in “Network Settings,” and press ENTER. 2 Select “IP Address Acquisition,” and press ENTER. 3 Select an item, and press ENTER. • Wh ...

Connecting to audio L/R jacks AV amplifier (receiver) Audio/video cable (supplied) : Signal flow Blu-ray Disc/DVD player (white) (red) (white) (red) Match the color of the plug to that of the jack. ...

and switch the input selector on your TV so that the signal from the player appears on the TV screen. , When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch. No picture appears when the video output resolution selected in “Output Video Format” is incorrect. , Press x on the player for more than 10 seconds to reset the video output resolution to the lowest resolution. The picture does not fill the screen, even though the aspect ratio is set in “DVD Aspect Ratio” under “Vi ...

Remote You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the player (page 10). b • Use the batteries correctly to avoid possible leakage and corrosion. Should leakage occur, do not touch the liquid with bare hands. Observe the following: – Do not use a new battery with an old battery, or batteries of different manufacturers. – Do not attempt to recharge the batteries. – If yo ...

Young ([email protected]). This product includes software written by Tim Hudson ([email protected]). Original SSLeay License Original SSLeay Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved. This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this ...

certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary ...

The Music Player screen appears. 2 Press N PLAY. Playback starts. To select a track 1 Press HOME. 2 Select (Music) using

The audio output differs as follows, depending on the source, output jack, and the selected settings. *1 When “Audio Output Priority” is set to “Stereo Analog,” LPCM 2ch signals are output from each jack. *2 When “Audio Output Priority” is set to “HDMI” or “Coaxial/Optical,” LPCM 2ch signals are output from jacks other than the selected jack. *3 Auto: when “Audio (HDMI)” is set to “Auto” in the “Audio Settings” setup (page 44). 2ch PCM: when “Audio (HDMI)” is set to “2ch PCM” in the “Audio Settings” setup (page 44). *4 Bitstre ...