Sony BDP-BX1 - Blu-ray Disc™ Player Operating Instructions Manual

that the signal from the player appears on your TV screen. 2 Press Z OPEN/CLOSE, and place a disc on the disc tray. 3 Press Z OPEN/CLOSE to close the disc tray. • When you insert a commercially available BD-ROM or DVD VIDEO, playback automatically starts depending on the disc. b Playback does not start by pressing N PLAY while the disc tray is open. DVD BD x STOP OPTIONS Z OPEN/ CLOSE X PAUSE N PLAY

programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIB ...

difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. The power does not turn on. , Check that the AC power cord is connected securely. , It takes a short while before the player turns on. The message “A new software version has been found on the network.” appears on the screen when turning the player on. , See “Network Update” (page 41) to update the player to a newer software ...

Turns on the player, or sets to standby mode. B Disc tray (page 31) C Blu-ray Disc indicator Lights up when a BD is recognized. z When the player is turned on for the first time, the Blu-ray Disc indicator lights up, then turns off when Easy Setup is complete. D Front panel display (page 11) E Remote sensor (page 26) F 24P indicator (page 44) Lights up when outputting 1080p/24 Hz video signals of BD-ROMs. G N (play), X (pause), x (stop) (page 31) Starts, pauses, or stops playback. H A (open/close) (page 31) Opens or closes the disc tray. To lock the disc tray (C ...

Format). Notes about BD-ROM compatibility Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. The audio output differs depending on the source, connected output jack, and selected audio settings. For details, see page 63. Type Disc Logo Icon used in this manual Characteristics Blu-ray Disc BD-ROMs and BD-REs/BD-Rs in BDMV and BDAV mode, including 8 cm discs (single layer) and DL discs DVD VIDEO Discs such as movies that can ...

The audio output differs as follows, depending on the source, output jack, and the selected settings. *1 When “Audio Output Priority” is set to “Stereo Analog,” LPCM 2ch signals are output from each jack. *2 When “Audio Output Priority” is set to “HDMI” or “Coaxial/Optical,” LPCM 2ch signals are output from jacks other than the selected jack. *3 Auto: when “Audio (HDMI)” is set to “Auto” in the “Audio Settings” setup (page 45). 2ch PCM: when “Audio (HDMI)” is set to “2ch PCM” in the “Audio Settings” setu ...

Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/–18 dBm (wave length 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/ PB, PR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LINE OUT S VIDEO: 4-pin mini DIN/ Y: 1.0 Vp-p, C: 0.286 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal EXT: External memory slot (For connec ...