Sony MEX-DV700 Operating Instructions Manual

Operating Instructions 4-157-172-12 (1) MEX-DV700 MEX-DV707 GB Multi Disc Player

expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. On safety • Comply with the traffic laws in your country. • For your safety, the monitor connected to the VIDEO OUT turns off automatically when the parking brake is not applied. This label is located on the bottom of the chassis. Note on the lithium battery Do not expose the battery to excessive heat such as direct sunlight, fire or the like. Warning if your car’s ignition has no ACC position Be sure to set the Auto Off function (page 39). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off. To cancel the demonstration (DEMO) display, see page 40. Preventing an accident Pictures appear only after you park the car and set the parking brake. If the car starts moving during video playback, pictures from the VIDEO OUT automatically disappear after displaying the following caution. The pictures on the screen are turned off, but audio source can be heard. Do not operate the unit or watch the monitor while driving. Video blocked for your safety.

Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Playable discs and symbols used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Location and function of controls . . . . . . . . . . .8 Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Card remote commander RM-X168 . . . . . .10 Getting Started Resetting the unit. . . . . . . . . . . . . . . . . . 12 Performing initial setup . . . . . . . . . . . . . 12 Preparing the card remote commander. . . . . . . . . . . . . . . . . . . . . . . 12 Detaching the front panel . . . . . . . . . . . 13 Attaching the front panel. . . . . . . . . . 13 Basic Operations Listening to the radio. . . . . . . . . . . . . . . 14 Playing video discs . . . . . . . . . . . . . . . . 15 Playing audio discs . . . . . . . . . . . . . . . . 17 Advanced Operations — Radio Storing and receiving stations . . . . . . . . . . . . .19 Storing automatically — BTM . . . . . . . . . .19 Storing manually . . . . . . . . . . . . . . . . . . . . .19 Receiving stored stations. . . . . . . . . . . . . . .19 RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Selecting PTY . . . . . . . . . . . . . . . . . . . . . . .20 Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . .20 Advanced Operations — Discs Playing JPEG files. . . . . . . . . . . . . . . . . . . . . . 20 Using PBC functions — Playback control . . . 21 Using play mode menu . . . . . . . . . . . . . . . . . . 21 Viewing time/text information of the disc. . . . 22 Configuring audio settings . . . . . . . . . . . . . . . 23 Changing the audio language/format . . . . . 23 Checking the program format. . . . . . . . . . . 24 Adjusting the audio output level — DVD level . . . . . . . . . . . . . . . . . . . . . . . 24 Magnifying pictures. . . . . . . . . . . . . . . . . . . . . 25 Adjusting the picture quality — Picture EQ . . . . . . . . . . . . . . . . . . . . . . . . . 25 Customizing the picture quality . . . . . . . . . 26 Locking discs — Parental control . . . . . . . . . . 26 Activating parental control . . . . . . . . . . . . . 26 Changing the area and its movie rating level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Repeat and shuffle play . . . . . . . . . . . . . . . . . . 27 Direct search play . . . . . . . . . . . . . . . . . . . . . . 28 Listing up tracks/images/video files — Quick-BrowZer. . . . . . . . . . . . . . . . . . . . . . 29 Selecting a track/image/video file. . . . . . . . 29 Selecting a file type. . . . . . . . . . . . . . . . . . . 29 Viewing audio disc information . . . . . . . . . . . 30 Sound Adjustment Adjusting the sound characteristics — SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Enjoying sophisticated sound functions . . . . . 31 Creating a virtual center speaker — CSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using rear speakers as a subwoofer — RBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Optimizing sound for the listening position — Intelligent Time Alignment . . . . . . . . . . 31 Setting the subwoofer position . . . . . . . . . . 32 Precisely calibrating the listening position — Intelligent Time Alignment Tune . . . . . 32 Customizing the equalizer curve — EQ7 Tune. . . . . . . . . . . . . . . . . . . . . . . . 33 Adjusting the speaker volume . . . . . . . . . . . . . 33

the car for safety. For installation and connections, see the supplied installation/ connections manual. Settings Visual setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Basic operation of visual setup . . . . . . . . . . 34 Language setup for display or soundtrack. . . . . . . . . . . . . . . . . . . . . . . . . . 35 Display setup. . . . . . . . . . . . . . . . . . . . . . . . 35 Custom setup. . . . . . . . . . . . . . . . . . . . . . . . 36 Audio setup . . . . . . . . . . . . . . . . . . . . . . . . . 37 Resetting all settings . . . . . . . . . . . . . . . . . . 37 System setup . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Basic operation of system setup . . . . . . . . . 38 Setting the clock . . . . . . . . . . . . . . . . . . . . . 42 Using Optional Equipment Auxiliary equipment . . . . . . . . . . . . . . . . . . . . 42 Additional Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Notes on discs . . . . . . . . . . . . . . . . . . . . . . . 43 Playback order of MP3/WMA/AAC/JPEG/ DivX®/MPEG-4 files . . . . . . . . . . . . . . . . . 44 About MP3 files . . . . . . . . . . . . . . . . . . . . . 44 About WMA files . . . . . . . . . . . . . . . . . . . . 45 About AAC files . . . . . . . . . . . . . . . . . . . . . 45 About JPEG files . . . . . . . . . . . . . . . . . . . . 45 About DivX video. . . . . . . . . . . . . . . . . . . . 45 About DivX Video-on-Demand . . . . . . . . . 45 About MPEG-4 files . . . . . . . . . . . . . . . . . . 45 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Removing the unit . . . . . . . . . . . . . . . . . . . . . . 46 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 47 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 48 Error displays/Messages . . . . . . . . . . . . . . . 50 Language code/area code list. . . . . . . . . . . . . . 51 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. “DVD VIDEO,” “DVD-R,” “DVD-RW,” “DVD+R,” and “DVD+RW” are trademarks. DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON- COMMERCIAL USE OF A CONSUMER FOR DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

This unit can play various video/audio discs. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type. *1 Audio files can also be stored. *2 Video/image files can also be stored. Note “DVD” may be used in this manual as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/ DVD+RWs. The following chart shows the supported compression formats and their file types. Available functions differ depending on the format, regardless of disc type. The format symbols below appear next to the description of functions available for that format. Tip For details on compression formats, see page 44. Note Even compatible discs may not be playable on this unit, depending on their recorded condition. Disc symbol in manual Disc format VIDEO DVD VIDEO DVD-R*1 / DVD-R DL*1 / DVD-RW*1 (Video mode/VR mode) DVD+R*1 / DVD+R DL*1 / DVD+RW*1 Video CD (Ver. 1.0/1.1/2.0) AUDIO Audio CD CD-ROM*2 / CD-R*2 / CD-RW*2 Format symbol in manual File type MP3 audio file WMA audio file AAC audio file JPEG image file DivX® video file MPEG-4 video file MPEG-4

Main unit • Refer to the pages listed for details. • Instructions in this manual generally describe the controls on the card remote commander. You can also use the controls on the main unit if they have the same or similar names to those on the card remote commander. A SEEK +/– buttons page 14, 16, 18, 20 Disc*1: Press to skip a chapter/track/scene/file. Press and hold momentarily to reverse/fast- forward disc. Press and hold to reverse/fast-forward track. Radio: Press to tune in stations automatically. Press and hold to find a station manually. B (Browse) button page 29 To enter the Quick-BrowZer mode.*2 C SOURCE/OFF button page 12, 13, 14, 15, 17 Press to turn on the power/change the source (Radio/Disc/AUX). Press for 1 second to turn off the power. Press for more than 2 seconds to shut off completely. D Control dial/SOUND/ENTER button page 12, 20 Rotate to adjust the volume/adjust a setting. Press to open the sound menu/apply a setting. Press and hold to open the system setup menu. E Disc slot page 15, 17 F Display window G Z (Eject) button page 15, 17 H AUX input jack page 42 To connect a portable audio device. I (Front panel release) button page 13 J MODE/ (Back) button page 14, 19, 29, 30, 43 MODE: To select the radio band (FM/AM)/select an auxiliary device connected to the AUX input jack (front) or AUX IN terminal (rear). (Back): To return to the previous display/move to the upper level/exit the system setup menu or sound menu. P U S H S O U N D / E N T E R ALBUM REP SHUF AUX SOURCE DSPL SEEK OFF SEEK SCRL 1 PTY 2 3 4 5 6 MODE 9 qa qd qg 2 q; qf qs 1 8 3 4 5 6 7

page 19, 22, 42 Press to change display items. Press and hold to scroll the display item. L RESET button (located behind the front panel) page 12 M PTY (Program Type) button page 20 To select PTY in RDS. N Number buttons Disc: (1): b REP page 15, 16, 27 (2): SHUF B page 15, 16, 27 (3)*3/(4): ALBUM –/+ (V/v) page 15, 16, 18, 20 Press to skip an album or folder/move the cursor. Press and hold to skip albums or folders continuously. (6): u (Play/Pause) page 15, 16, 17, 18, 20 Radio: Press to receive stored stations. Press and hold to store stations. O Receptor for the card remote commander *1 Operation differs depending on the disc (page 16, 18). *2 When a CD/MP3/WMA/AAC/JPEG/DivX/MPEG-4 is played. *3 This button has a tactile dot.

• Refer to the pages listed for details. • Remove the insulation film before use (page 12). A OFF button page 15, 17 Press to turn off/stop the source. Press and hold to shut off completely. B SOUND button page 30, 31, 32 To open the sound menu. C VISUAL SETUP button page 21, 24, 25, 26, 27, 28, 29, 31, 32, 34 To open the play mode/visual setup menu. D SYSTEM SETUP button page 19, 24, 32, 33, 38, 42, 43 To open the system setup menu. E (BACK)/O button page 21, 22, 26, 27, 29, 30, 33, 34 To return to the previous display/move to the upper level/exit the system setup menu or sound menu/return to the menu on a VCD*1. F Number buttons page 15, 16, 19, 21, 22, 26, 27, 28, 29 Disc: To locate a title/chapter/track. Radio: Press to receive stored stations. Press and hold to store stations. G CLEAR button page 26, 29 To delete an entered number. H DSPL (Display) button page 19, 22, 42 To change display items. 1 2 3 4 5 7 8 6 qf qj qg qh qd qs 9 0 qa

To attenuate the sound (to cancel, press again). J u (Play/Pause) button page 15, 16, 17, 18, 20 K .m/M> buttons page 14, 16, 18, 20 Disc*2: Press to skip a chapter/track/scene/file. Press and hold momentarily to reverse/fast- forward disc. Press and hold to reverse/fast-forward track. Radio: Press to tune in stations automatically. Press and hold to find a station manually. L DVD playback setting buttons (AUDIO): page 16, 23 To change the audio language/format. (For VCD/CD/MP3/WMA/AAC/MPEG-4, to change the audio channel.) (SUBTITLE): page 16 To change the subtitle language. (ANGLE): page 16 To change the viewing angle. (TOP MENU): page 16 To open the top menu on a DVD. (MENU): page 16 To open the menu on a disc. M (BROWSE) button page 29 To enter the Quick-BrowZer mode.*3 N

Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit. Detach the front panel (page 13) and press the RESET button (page 9) with a pointed object, such as a ball-point pen. Note Pressing the RESET button will erase the clock setting and some stored contents. Performing initial setup After resetting, the display for initial speaker setup appears. Be sure to set correctly following the procedure below to enjoy the various sound functions of this unit. To skip the initial setup, press (SOURCE/OFF), or insert a disc. 1 Press the control dial in the initial setup display. 2 Rotate the control dial to set the audio output, then press it. If a subwoofer is connected, select “SUB OUT.” If a power amplifier is connected, select “REAR OUT.” If neither subwoofer or power amplifier is connected, you can select either “SUB OUT” or “REAR OUT.” 3 Rotate the control dial to select your listening position, then press it. Select “FRONT L” if your listening position is front left, or select “FRONT R” if front right. The clock display appears when the setting is complete. Note During the initial setup procedure, returning to the previous display is not possible by pressing . To restart the initial setup, reset the unit by pressing the RESET button. With the card remote commander Press M/m instead of rotating the control dial, press (ENTER) instead of pressing the control dial. Preparing the card remote commander Remove the insulation film. Tip For how to replace the battery, see page 45. Control dial SOURCE / OFF

You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press and hold (SOURCE/OFF). The unit is turned off. 2 Press , then pull it off towards you. Notes • Do not drop or put excessive pressure on the front panel and display window. • Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Attaching the front panel Engage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks. Note Do not put anything on the inner surface of the front panel. (SOURCE/OFF) B A

Tip For details on other radio functions, see “Advanced Operations — Radio” on page 19. With the card remote commander Use (SRC) instead of (SOURCE/OFF), and .m/M> instead of (SEEK) –/+. 1 Press (SOURCE/OFF) repeatedly until “TUNER” appears. 2 Press (MODE) repeatedly until the desired band (FM1, FM2, FM3, AM1 or AM2) appears. 3 Perform tuning. To tune automatically Press (SEEK) +/–. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. To tune manually Press and hold (SEEK) +/– to locate the approximate frequency, then press (SEEK) +/– repeatedly to fine adjust to the desired frequency. .m/M> MODE SRC SEEK MODE SOURCE / OFF

Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. To stop playback Press (SOURCE/OFF) for 1 second. With the card remote commander, press (OFF). To eject the disc Press Z. Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. About the DVD menu A DVD is divided into several sections, which make up a picture or music feature. These sections are called “titles.” When you play a DVD that contains several titles, you can select a desired title using the DVD’s top menu. For DVDs that allow you to select items such as subtitle/sound language(s), select these items using the DVD menu. 1 Turn on your monitor, then select the input source on your monitor corresponding to this unit. 2 Insert the disc (label side up). Playback starts automatically. If playback does not start automatically, press u. 3 If the DVD menu appears, press (1)(b)/(2)(B)/(3)(V)/(4)(v) to move the cursor, then press (6) (u) to confirm. With the card remote commander, press the

*1 Unavailable depending on the disc. *2 When the 4-digit input prompt appears, input the language code (page 51) for the desired language. *3 When a DivX/MPEG-4 is played. Note on DivX/MPEG-4 playback If a disc contains multiple file types, only the selected file type (audio/video/image) can be played. To play DivX/MPEG-4 video files of such a disc, press during playback, select “LIST UP VIDEO FILES,” then select the desired file (page 29). To Press pause/resume play after pause u skip a chapter/track/scene/file .m/M> reverse/fast-forward disc and hold .m/M> momentarily; and then repeatedly to switch the speed (× 2 t × 12 t × 120 t × 2…) cancel reverse/fast-forward u show the DVD menu*1 Remote: (TOP MENU) or (MENU) select items in the DVD menu*1 Main unit: (1)(b)/(2)(B)/(3)(V)/(4)(v) to move the cursor, then press (6) (u) to confirm Remote: u SUBTITLE ANGLE MENU b/B/V/v ALBUM

Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. To stop playback Press (SOURCE/OFF) for 1 second. With the card remote commander, press (OFF). To eject the disc Press Z. Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. 1 Insert the disc (label side up). Playback starts automatically. If playback does not start automatically, press u. continue to next page t u OFF u SOURCE / OFF Z

* When an MP3/WMA/AAC is played. To Press pause/resume play after pause u skip a track .m (<)/M> (,) reverse/fast-forward track and hold .m/M> skip an album* Main unit: (3) (ALBUM –)/(4) (ALBUM +) Remote: M/m skip albums continuously* Main unit: and hold (3) (ALBUM –)/(4) (ALBUM +) Remote: and hold M/m u u .m/M> ALBUM

Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SRC) repeatedly until “TUNER” appears on the main unit. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press (SYSTEM SETUP). The system setup item appears. 3 Press M/m to select “BTM,” then press (ENTER). The unit stores stations in order of frequency on the number buttons ((1) to (6)). A beep sounds when the setting is stored. With the main unit Press (SOURCE/OFF) instead of (SRC), press and hold the control dial instead of pressing (SYSTEM SETUP), rotate the control dial instead of pressing M/m, press the control dial instead of (ENTER). Storing manually 1 While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears on the main unit. The number button indication appears on the main unit. Note If you try to store another station on the same number button, the previously stored station will be replaced. Receiving stored stations 1 Select the band, then press a number button ((1) to (6)). RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items A Radio band, Function B Program service name, Clock, Frequency*, Preset number * While receiving the RDS station, “ *” is displayed on the left of the frequency indication. To change display items B, press (DSPL). RDS services This unit automatically provides RDS services as follows: Notes • Depending on the country/region, not all RDS functions may be available. • RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data. PTY (Program Types) Displays the currently received program type. Also searches your selected program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. B A

FM reception. The current program type name appears if the station is transmitting PTY data. 2 Rotate the control dial to select the program type. 3 Press the control dial. The unit searches for a station broadcasting the selected program type. Type of programs Notes • You cannot use this function in countries/regions where no PTY data is available. • You may receive a different radio program from the one you select. Setting CT 1 Set “CT-ON” in system setup (page 39). Notes • The CT function may not work even though an RDS station is being received. • There might be a difference between the time set by the CT function and the actual time. Advanced Operations — Discs This chapter consists of the following sections. • Video-specific operations* t page 20 to 27 • Video*/audio common operations t page 27 to 29 • Audio-specific operations t page 30 * Including JPEG operations. Playing JPEG files You can enjoy a slide show of JPEG files on this unit. The slide show starts automatically when you insert a disc or press u. For details on how to start playback, follow step 1 to 3 of “Playing video discs” on page 15. Other playback operations Notes • If a large-sized image is rotated, it may take longer to display. • Progressive JPEG files cannot be displayed. • If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. To play JPEG image files of such a disc, press during playback, select “LIST UP IMAGE FILES,” then select the desired file (page 29). Tip You can also select a file to play using a list (Quick- BrowZer) (page 29). NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE (Education), DRAMA (Drama), CULTURE (Culture), SCIENCE (Science), VARIED (Varied), POP M (Pop Music), ROCK M (Rock Music), EASY M (M.O.R. Music), LIGHT M (Light classical), CLASSICS (Serious classical), OTHER M (Other Music), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s program), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary) To Press rotate the image Remote: skip an album Main unit: (3) (ALBUM –)/ (4) (ALBUM +) skip albums continuously Main unit: and hold (3) (ALBUM –)/ (4) (ALBUM +)

— Playback control The PBC menu assists your operation interactively while a PBC compatible VCD is played. 1 Press (VISUAL SETUP) while the unit is off. The visual setup menu appears. 2 Press M/m to select (CUSTOM SETUP), then press (ENTER). The custom setup items appear. 3 Press M/m to select “PBC,” then press (ENTER). 4 Press M/m to select “ON,” then press (ENTER). 5 Start playing a PBC compatible VCD. The PBC menu appears. 6 Press the number buttons to select the desired item, then press (ENTER). 7 Follow the instructions in the menu for interactive operations. To return to the previous display, press O. Playing without the PBC function 1 Select “PBC: OFF” in the visual setup menu, then start playing a VCD. Playback starts. The PBC menu does not appear during playback. Notes • The items on the menu, and operation procedures differ depending on the disc. • During PBC playback, the track number, playback item, etc., do not appear in the play mode menu (page 21). • Resume playback is unavailable during playback without PBC. Using play mode menu You can use the play mode menu on this unit to control playback or configure playback settings. To show the play mode menu, press (VISUAL SETUP) during playback. To hide, press (VISUAL SETUP) again. Notes • During audio disc playback, (VISUAL SETUP) is inactive. • During JPEG playback, (VISUAL SETUP) is active only when an image is fully displayed. Tip If you press (VISUAL SETUP) while the playback is stopped, the visual setup menu (by the monitor) appears where you can configure various settings, such as display language, audio adjustment, etc. (page 34). E.g., when playing a DVD A Play mode menu items For details, see “List of play mode menu items” on page 22. B DVD: Title number/Total VCD: Track number/Total*1 JPEG: Album number/Total DivX/MPEG-4: Album (folder) number/Total C DVD: Chapter number/Total JPEG: Image number/Total DivX/MPEG-4: File number/Total D Elapsed playback time*2 E Format F Playback status (PLAY N, PAUSE X, etc.) G Current setting H Options I Selected item J Selected item name and/or operation assist messages *1 When playing a VCD with the PBC function (page 21), no indication appears. *2 During JPEG playback, no indication appears. continue to next page t MPEG-4 12(67) 018(034) T 1:35:55 1:ENGLISH OFF 1:ENGLISH 2:FRENCH 3:SPANISH PLAY DVD VIDEO SUBTITLE Select : ENTER G B C D F E H A I J

Press

2.0 without PBC function.) • T **:** Elapsed playback time of the current track • T-**:** Remaining time of the current track • D **:** Elapsed playback time of the current disc • D-**:** Remaining time of the current disc JPEG playback • Album number/Total • Image number/Total DivX/MPEG-4 playback • Album (folder) number/Total • File number/Total • T **:** Elapsed playback time of the current file Checking text information The text information (album name, image name, etc.) of JPEG/DivX/MPEG-4 files can be checked. * “NO TEXT” appears if there is no text information. Text information differs depending on the format as follows. JPEG playback • Album name (when the album number is displayed) • Image name (when the image number is displayed) DivX/MPEG-4 playback • Album (folder) name (when the album (folder) number is displayed) • File name (when the file number is displayed) Configuring audio settings Note Discs in DTS format are not supported. The sound is not output if the DTS format is selected. Changing the audio language/ format For DVD, the audio language can be changed if the disc is recorded with multilingual tracks. For DVD/DivX, you can change the audio format when playing a disc recorded in multiple audio formats (e.g., Dolby Digital). 1 During playback, press (AUDIO) repeatedly until the desired audio language/format appears. * When playing DivX, audio format/channel (e.g., “MP3”) appears. The audio language switches among the available languages. When the 4-digit input prompt appears, input the language code (page 51) for the desired language. When the same language is displayed two or more times, the disc is recorded in multiple audio formats. Changing the audio channel When playing VCD/CD/MP3/WMA/AAC/ MPEG-4, you can select the right or left channel sound to listen through both right and left speakers. The options are indicated below. STEREO (ST): Standard stereo sound (default) 1/L (L): Left channel sound (monaural) 2/R (R): Right channel sound (monaural) 037(325) Image name Album/image/folder/file number Text information* continue to next page t 1:ENGLISH Dolby D Audio language/format* MPEG-4

repeatedly until the desired audio channel appears. E.g., when playing an MP3 Note You may not be able to change the audio setting depending on the disc. Tip You can also change the settings of video discs by selecting “AUDIO” in the play mode menu (page 21). Checking the program format You can check the number of channels and component position on the DVD VIDEO being played. 1 During playback, press (VISUAL SETUP). The play mode menu appears. 2 Press M/m to select (AUDIO). The program format appears. * “PCM,” “DOLBY DIGITAL,” etc., appears depending on the disc. The letters in the program format display represent the following sound components and its position. : Front (left) : Front (right) : Center : Rear (left) : Rear (right) : Rear (monaural): The rear component of the Dolby Surround processed signal and the Dolby Digital signal : Low Frequency Effect signal The program format name and channel numbers appear as follow. Example: Dolby Digital 5.1 ch To hide the play mode menu, press (VISUAL SETUP). Adjusting the audio output level — DVD level You can adjust the audio output level for a DVD recorded in Dolby Digital format, to reduce the volume level differences between disc and source. 1 During playback, press (SYSTEM SETUP). The system setup item appears on the main unit. 2 Press M/m to select “DVD-LEVEL,” then press (ENTER). 3 Press m to set to “ADJST-ON,” then press (ENTER). 4 Press M/m to select “DOLBY-ADJ,” then press (ENTER). 5 Press M/m to adjust the output level. The output level is adjustable in single steps, between –10 and +10. 6 Press (ENTER). The setting is complete. To hide the system setup display, press (SYSTEM SETUP). With the main unit Press and hold the control dial instead of pressing (SYSTEM SETUP), rotate the control dial instead of pressing M/m, press the control dial instead of (ENTER). TRACK NAME ALBUM NAME ARTIST NAME MP3 0003/1000 ST 3:17 SHUF Audio channel PLAY DVD VIDEO L C LFE LS R RS 12(67) 018(034) T 1:35:55 1:ENGLISH Dolby D PROGRAM FORMAT DOLBY DIGITAL 3/2.1 Current program format Current audio format* DOLBY DIGITAL 3 / 2 . 1 Rear component × 2 Front component × 2 + Center component × 1 LFE component × 1

1 During playback, press (VISUAL SETUP). The play mode menu appears. 2 Press M/m to select (CENTER ZOOM), then press (ENTER). The current option appears. 3 Press M/m to select the desired option (×1, ×1.6*), then press (ENTER). * The picture may become grainy. The picture is magnified. To hide the play mode menu, press (VISUAL SETUP). To scroll the picture, press

The option “CUSTOM” allows you to make your own picture quality setting by adjusting picture tones. You can store adjustments for both “LIGHT ON’ and “LIGHT OFF” settings. 1 During playback, press (VISUAL SETUP). The play mode menu appears. 2 Press M/m to select (PICTURE EQ), then press (ENTER). The current option appears. 3 Press M/m to select “CUSTOM,” then press (ENTER). 4 Press M/m to select the picture tone, then press

rating level The restriction levels can be set depending on the area and its movie ratings. 1 Press (VISUAL SETUP) while the unit is off. The visual setup menu appears. 2 Press M/m to select (CUSTOM SETUP), then press (ENTER). The custom setup items appear. 3 Press M/m to select “PARENTAL CONTROL,” then press (ENTER). The options appear. 4 Press M/m to select “PLAYER t,” then press (ENTER). When parental control is already activated, the display to enter your password appears. To change the setting, enter your password, then press (ENTER). 5 Press M/m to select “STANDARD,” then press (ENTER). The options appear. 6 Press M/m to select the desired area to apply its movie ratings, then press (ENTER). The area is selected. When you select “OTHERS t,” enter the area code selecting from “Area code list” on page 51, using the number buttons. 7 Press M/m to select “LEVEL,” then press (ENTER). The options appear. The lower the number, the stricter the restriction level. 8 Press M/m to select the desired rating, then press (ENTER). The setting is complete. To return to the previous display, press . To hide the visual setup menu, press (VISUAL SETUP). Repeat and shuffle play 1 During playback, press (1) (REP) or (2) (SHUF) on the main unit repeatedly until the desired option appears. Repeat or shuffle play starts. The repeat options and switching order of each disc/format are indicated below. PARENTAL CONTROL: LEVEL : STANDARD : USA USA OTHERSt 8: CUSTOM SETUP PARENTAL CONTROL: LEVEL : STANDARD : 8: 1: 2: 3: 4: 5: G PG PG-13 CUSTOM SETUP Disc/format Options OFF TITLE: Repeats the current title. CHAPTER: Repeats the current chapter. *1 OFF TRACK: Repeats the current track. OFF TRACK: Repeats the current track. ALBUM: Repeats the current album. OFF IMAGE: Repeats the current image. ALBUM: Repeats the current album. OFF FILE: Repeats the current video file. ALBUM: Repeats the current album (folder). continue to next page t MPEG-4 MPEG-4

disc/format are indicated below. *1 Available only when playing version 1.0/1.1 VCD, or version 2.0 VCD without PBC function. *2 Excluding DVD-R/DVD-R DL/DVD-RW in VR mode. To return to normal play mode, select “OFF.” Notes • If you return to a disc’s menu/top menu, repeat/ shuffle play will be canceled. • Repeat/shuffle play cannot be set in the disc’s menu/ top menu. Setting from the play mode menu 1 During playback, press (VISUAL SETUP). The play mode menu appears. 2 Press M/m to select or , then press (ENTER). 3 Press M/m to select the desired option, then press (ENTER). Repeat or shuffle play starts. Press (VISUAL SETUP) to hide the play mode menu. Direct search play You can directly locate a desired point by specifying the title number, chapter number, etc. 1 During playback, press the number buttons to enter an item (track, title, etc.) number, then press (ENTER). Playback starts from the beginning of the selected point. Setting from the play mode menu Search items differ depending on the disc/format as follows. * Available only when playing VCD without PBC function. Disc/format Options *2 OFF TITLE: Plays chapters in current title in random order. *1 OFF DISC: Plays tracks in current disc in random order. OFF ALBUM: Plays tracks/images/ video files in current album (folder) in random order. MPEG-4 MPEG-4 PLAY DVD VIDEO 12(67) 018(034) T 1:35:55 OFF CHAPTER TITLE OFF Disc/Format Items TITLE Starts playing from a selected title. CHAPTER Starts playing from a selected chapter. TIME Starts playing from the point determined by the input time code. * TRACK Starts playing from a selected track. ALBUM Starts playing from a selected album. IMAGE Starts playing from a selected image. ALBUM Starts playing from a selected album (folder). FILE Starts playing from a selected file. MPEG-4 MPEG-4 MPEG-4

(VISUAL SETUP). The play mode menu appears. 2 Press M/m to select the desired item, then press (ENTER). The number in parentheses indicates the total number of selected item. 3 Press the number buttons to enter an item number or time code. For example, to locate 2 hours, 10 minutes, and 20 seconds, just enter “21020.” To clear numbers already input, press (CLEAR). 4 Press (ENTER). Playback starts from the selected point. Press (VISUAL SETUP) to hide the play mode menu. Listing up tracks/images/video files — Quick-BrowZer Selecting a track/image/video file You can list up albums/folders/tracks/images/ video files on the monitor, and select a desired one to play. This function is convenient especially for the disc in MP3/WMA/AAC/JPEG/DivX/MPEG-4 format containing many albums/tracks, etc. 1 During playback, press . The list of categories or files in the currently played item appears. To return/proceed to the previous/next page, press

During audio playback, you can check the disc information or display the sleeve image (Album Artwork Display)* of MP3/WMA/AAC file on the monitor. * The recommended size is from 240 × 240 to 960 × 960 pixels. E.g., when playing an MP3 A Track number or track name Disc name/Album name Artist name B Format C Track number/Total D Playback status (N, X, etc.) E Current audio channel When playing CD/MP3/WMA/AAC, the audio channel can be changed. For details, see “Changing the audio channel” on page 23. F Elapsed playback time G Current play mode H Album Artwork Display/Wallpaper Tip You can select a track to play using a list (Quick- BrowZer) (page 29). Sound Adjustment Adjusting the sound characteristics — SOUND You can adjust the sound characteristics according to your preference. 1 During reception/playback, press (SOUND) repeatedly until the desired setting item appears on the main unit. 2 Press M/m to adjust the level or select the desired option. 3 Press . The setting is complete and the display returns to normal play/reception mode. With the main unit Press the control dial instead of (SOUND), rotate the control dial instead of pressing M/m. The setting items in the sound menu are indicated below. Follow the page reference for details. *1 Appears only when “REAR/SUB” is set to “SUB OUT” (page 39). *2 Appears only when a disc is played. *3 Appears only when “REAR/SUB” is set to “SUB OUT” (page 39), and the “POS” is set to “FRONT L”/“FRONT R”/“FRONT”/“ALL” (page 31). TRACK NAME ALBUM NAME ARTIST NAME MP3 0003/1000 ST 3:17 SHUF B C D E F A G H BAL (Balance): Adjusts the sound balance between the left and right speakers. FAD (Fader): Adjusts the relative level between the front and rear speakers. SUB*1 (Subwoofer): Adjusts the subwoofer volume. EQ7: Selects an equalizer curve from 7 music types: “XPLOD,” “VOCAL,” “EDGE,” “CRUISE,” “SPACE,” “GRAVITY,” “CUSTOM,” “OFF.” CSO*2 (Center Speaker Organizer): Selects the virtual center speaker mode: “OFF,” “1,” “2,” “3” (page 31). POS (Position): Selects the listening position (page 31). POS SUB*3 (Subwoofer position): Selects the subwoofer position from your listening position: “NEAR,” “NORM,” “FAR” (page 32). RBE (Rear Bass Enhancer): Uses rear speakers as a subwoofer: “OFF,” “1,” “2,” “3” (page 31).

functions Creating a virtual center speaker — CSO To fully enjoy surround sound, it is adequate to have 5 speakers (front left/right, rear left/right, center) and 1 subwoofer. CSO (Center Speaker Organizer) allows you to create a virtual center speaker even though it is not connected. To set CSO, while a disc is played, press (SOUND) repeatedly until “CSO” appears, then select the desired mode. For details on this procedure, see “Adjusting the sound characteristics — SOUND” on page 30. Note CSO is effective only when “MULTI CH OUTPUT” is set to “MULTI” (page 37), as it is effective only for playback of multi-channel sources. Using rear speakers as a subwoofer — RBE RBE (Rear Bass Enhancer) enhances the bass sound by applying the low pass filter setting (page 41) to rear speakers. This function allows rear speakers to work as a subwoofer even if it is not connected. To set RBE, press (SOUND) repeatedly until “RBE” appears, then select the desired mode. For details on this procedure, see “Adjusting the sound characteristics — SOUND” on page 30. Optimizing sound for the listening position — Intelligent Time Alignment The unit can change the localization of sound by delaying the sound output from each speaker to suit your position, and simulate a natural sound field with the feeling of being in the center of it wherever you sit in the car. The setting is configurable both from the sound menu (page 30) and the visual setup menu (page 34). The options for “POS” (sound menu) and “POSITION” (visual setup menu) are indicated below. By the sound menu Press (SOUND) repeatedly until “POS” appears, then select your listening position. For details on this procedure, see “Adjusting the sound characteristics — SOUND” on page 30. By the visual setup menu 1 Press (VISUAL SETUP) while the unit is off. The visual setup menu appears. 2 Press M/m to select (AUDIO SETUP), then press (ENTER). The audio setup items appear. 3 Press M/m to select “POSITION,” then press (ENTER). The options appear. 4 Press M/m to select the desired option, then press (ENTER). The setting is complete. Tip The setting in sound menu will switch the setting in the visual setup menu automatically, and vice versa. FRONT L (1): Front left FRONT R (2): Front right FRONT (3): Center front ALL (4): In the center of your car CUSTOM*: Precisely calibrated position * For details on how to calibrate, see “Precisely calibrating the listening position — Intelligent Time Alignment Tune” on page 32. 1 2 4 3 AUDIO SETUP AUDIO DRC : POSITION : SUB POSITION : MULTI CH OUTPUT : STANDARD FRONT L OFF FRONT ALL FRONT L FRONT R

You can set the approximate subwoofer position from your listening position: “NEAR,” “NORM”/“NORMAL” or “FAR.” The setting is available only under the following conditions. – The subwoofer is connected and “REAR/SUB” is set to “SUB OUT” (page 39). – The listening position is set to “FRONT L,” “FRONT R,” “FRONT” or “ALL” (page 31). The setting is configurable both from the sound menu (page 30) and the visual setup menu (page 34). By the sound menu Press (SOUND) repeatedly until “POS SUB” appears, then select the subwoofer position. For details on this procedure, see “Adjusting the sound characteristics — SOUND” on page 30. By the visual setup menu 1 Press (VISUAL SETUP) while the unit is off. The visual setup menu appears. 2 Press M/m to select (AUDIO SETUP), then press (ENTER). The audio setup items appear. 3 Press M/m to select “SUB POSITION,” then press (ENTER). The options appear. 4 Press M/m to select the desired option, then press (ENTER). The setting is complete. Tip The setting in sound menu will switch the setting in the visual setup menu automatically, and vice versa. Precisely calibrating the listening position — Intelligent Time Alignment Tune You can precisely calibrate your listening position from each speaker so that the sound delay reaches the listener more correctly. The setting is configurable both from the system setup menu (page 38) and the visual setup menu (page 34). Before starting, measure the distance between your listening position and each speaker. By the system setup menu 1 During reception/playback, press (SYSTEM SETUP). The system setup item appears on the main unit. 2 Press M/m to select “SP SETUP,” then press (ENTER). 3 Press M/m to select “POS TUNE,” then press (ENTER). 4 Press M/m to select the desired speaker, then press (ENTER). The speaker switches as follows: FL (Front Left) t FR (Front Right) t SR (Rear Right) t SL (Rear Left) t SUB* (Subwoofer) * Appears only when “REAR/SUB” is set to “SUB OUT” (page 39). 5 Set the distance between your listening position and each speaker. To adjust the distance, press M/m. The distance is adjustable in 2 cm (13/16 in) steps, between 0 and 400 cm (0 and 13 1/10 ft). 6 Press (ENTER). The setting is complete. To set the other speakers, repeat step 4 and 5. To hide the system setup display, press (SYSTEM SETUP). With the main unit Press and hold the control dial instead of pressing (SYSTEM SETUP), rotate the control dial instead of pressing M/m, press the control dial instead of (ENTER). AUDIO SETUP AUDIO DRC : POSITION : SUB POSITION : MULTI CH OUTPUT : STANDARD FRONT L NORMAL NEAR NORMAL FAR

1 From the visual setup menu, select (AUDIO SETUP) c “POSITION” c “CUSTOM,” then press (ENTER). For details on this procedure, see “Optimizing sound for the listening position — Intelligent Time Alignment” on page 31. The speaker list appears. 2 Set the distance between your listening position and each speaker. To select the speaker, press M/m and (ENTER). To adjust the distance, press M/m, and to confirm, press (ENTER). The distance is adjustable in 2 cm (13/16 in) steps, between 0 and 400 cm (0 and 13 1/10 ft). To return to the previous display, press . To hide the visual setup menu, press (VISUAL SETUP). Tip The setting in visual setup will switch the setting in system setup automatically, and vice versa. Customizing the equalizer curve — EQ7 Tune “CUSTOM” of EQ7 allows you to make your own equalizer settings. You can adjust the level of 7 different bands: 62 Hz, 157 Hz, 396 Hz, 1.0 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz. 1 During reception/playback, press (SYSTEM SETUP). The system setup item appears on the main unit. 2 Press M/m to select “EQ7 TUNE,” then press (ENTER). 3 Press M/m to select “CUSTOM,” then press (ENTER). 4 Adjust the level of each frequency. To adjust the level, press M/m. The level is adjustable in single steps, between –8 and +8. To switch the frequency, press

following two setup menus. • Visual setup menu (page 34) Allows configuration of visual-related items (by the monitor). • System setup menu (page 38) Allows configuration of system-related items (by the main unit). Visual setup The visual setup menu includes the following categories. LANGUAGE SETUP (page 35) Sets the menu, subtitle language, etc. DISPLAY SETUP (page 35) Adjusts the settings of the connected monitor. CUSTOM SETUP (page 36) Customizes the playback of discs. AUDIO SETUP (page 37) Adjusts the sound settings according to the disc. RESET (page 37) Resets all setting items. Basic operation of visual setup You can set items in the menu by the following procedure. E.g., when setting the aspect ratio to “4:3 PAN SCAN.” 1 Press (VISUAL SETUP) while the unit is off. The visual setup menu appears. 2 Press M/m to select (DISPLAY SETUP), then press (ENTER). The display setup items appear. 3 Press M/m to select “MONITOR TYPE,” then press (ENTER). The options appear. 4 Press M/m to select “4:3 PAN SCAN,” then press (ENTER). The setting is complete. To return to the previous display, press . To hide the visual setup menu, press (VISUAL SETUP). LANGUAGE SETUP MENU : AUDIO : SUBTITLE : ENGLISH ENGLISH ENGLISH DISPLAY SETUP MONITOR TYPE : WALLPAPER : PICTURE EQ : 16:9 WALLPAPER 1 AUTO DISPLAY SETUP MONITOR TYPE : WALLPAPER : PICTURE EQ : 16:9 16:9 4:3 LETTER BOX 4:3 PAN SCAN

Select (LANGUAGE SETUP), then select the desired item and option below, using M/m and (ENTER). For details on this procedure, see “Basic operation of visual setup” on page 34. Display setup Select (DISPLAY SETUP), then select the desired item and option below, using M/m and (ENTER). For details on this procedure, see “Basic operation of visual setup” on page 34. Follow the page reference for details. “z” indicates the default setting. Item Purpose MENU To change the disc’s menu language. AUDIO To change the soundtrack language. SUBTITLE To change the subtitle language recorded on the disc. Item Option Purpose MONITOR TYPE Selects an aspect ratio suitable for the connected monitor. 16:9 (z) To display the wide picture. Suitable when connecting to a wide-screen monitor or a monitor with a wide mode function. 4:3 LETTER BOX To display a wide picture with bands on the upper and lower positions of the screen. Suitable when connecting to a 4:3 screen monitor. 4:3 PAN SCAN To display a wide picture on the entire screen and automatically cut off the portions that do not fit. WALLPAPER WALLPAPER 1, 2 (z), 3 To select the design of wallpaper. PICTURE EQ (page 25) Selects the setting option to show in the play mode menu. AUTO (z) To switch the night time/day time use options automatically according to the dimmer setting in system setup (page 40). LIGHT ON To show the night time use options. LIGHT OFF To show the day time use options. continue to next page t MPEG-4

versa. Custom setup Select (CUSTOM SETUP), then select the desired item and option below, using M/m and (ENTER). For details on this procedure, see “Basic operation of visual setup” on page 34. Follow the page reference for details. “z” indicates the default setting. *1 Excluding DVD-R/DVD-R DL/DVD-RW in VR mode. *2 DVD VIDEO only. *3 Available only after DivX VOD disc is played. Note If parental control is applied, the resume playback will not work. In this case, playback starts from the beginning of the disc when it is inserted. Item Option Purpose PARENTAL CONTROL (page 26) *1 Sets the playback restrictions to not play inappropriate discs or scenes. OFF t (z) To deactivate parental control. ON t To activate parental control. PLAYER t To set the restriction standard and its level. PASSWORD t To set a new 4-digit password. SLIDE SHOW TIME 5 sec. (z), 10 sec., 20 sec., 40 sec., 60 sec. To select the slide show interval. FIXED To deactivate the slide show. MULTI-DISC RESUME *2 ON (z) To store the resume settings in memory for up to 5 discs. OFF To not store the resume settings in memory. Resume playback is available only for the current disc in the unit. PLAY LIST PLAY (For DVD-R/DVD-R DL/DVD-RW in VR mode only) ORIGINAL (z) To play originally recorded titles. PLAY LIST To play edited play list. PBC (Playback control) ON (z) To activate the PBC function. OFF To deactivate the PBC function. DivX VOD Displays the registration code for this unit. For more information, see page 45. Done To close the display. DivX DEACTIVATION*3 Deactivates this unit’s registration for DivX VOD playback. Done To close the display. MPEG-4

For details on this procedure, see “Basic operation of visual setup” on page 34. Follow the page reference for details. “z” indicates the default setting. *1 Excluding DVD-R/DVD-R DL/DVD-RW in VR mode. *2 Available only when “REAR/SUB” is set to “SUB OUT” (page 39), and the “POSITION” is set to “FRONT L”/ “FRONT R”/“FRONT”/“ALL.” Resetting all settings All settings (excluding parental control setting) in visual setup can be reset. Select (RESET), then “RESET ALL SETTINGS,” “YES” using M/m and (ENTER). For details on this procedure, see “Basic operation of visual setup” on page 34. Note Do not power off the unit while resetting, as it takes a few seconds to complete. Item Option Purpose AUDIO DRC *1 Makes the sound clear when the volume is low. Only for a DVD conforming to Audio DRC (Dynamic Range Control). STANDARD (z) To select the standard setting. WIDE RANGE To obtain the feeling of being at a live performance. POSITION (page 31) Sets the listening position to obtain the feeling of being in the center of the sound field wherever you sit in the car. OFF (z) To not set the listening position. FRONT To set to center front. ALL To set to the center of your car. FRONT L To set to front left. FRONT R To set to front right. CUSTOM To precisely calibrate the listening position (page 32). SUB POSITION*2 (page 32) NEAR, NORMAL (z), FAR To select the approximate subwoofer position from your listening position. MULTI CH OUTPUT Switches the method of outputting 4.1-channel sources. MULTI (z) To output in 4.1 channels. STEREO To downmix to 2 channels.

categories. • SET: General settings (page 39) • DSPL: Display settings (page 40) • R/M: Receive mode settings (page 40) • SND: Sound settings (page 41) Basic operation of system setup You can set items in the menu by the following procedure. E.g., when setting the demonstration. 1 Press (SYSTEM SETUP) while the unit is off. The system setup item appears on the main unit. 2 Press M/m to select “DEMO,” then press (ENTER). The option appears. 3 Press M/m to select “ON” or “OFF,” then (ENTER). The setting is complete. To hide the system setup display, press (SYSTEM SETUP). With the main unit Press and hold the control dial instead of pressing (SYSTEM SETUP), rotate the control dial instead of pressing M/m, press the control dial instead of (ENTER).

SET (Setup) Item Option Purpose Unit status CLOCK-ADJ (Clock Adjust) (page 42) – – Any status. CT (Clock Time) (page 19, 20) ON To activate the CT function. OFF (z) To deactivate the CT function. BEEP ON (z) To activate the operation sound. OFF To deactivate the operation sound. COLOR-SYS (Color System) Changes the video output signal according to the connected monitor. PAL (z) To set to PAL. Unit off. NTSC To set to NTSC. RM (Rotary Commander) Changes the operative direction of the rotary commander controls. NORM (z) To use in the factory-set position. Any status. REV To use on the right side of the steering column. AUTO-OFF Shuts off automatically after a desired time when the unit is off. NO (z) To deactivate the Auto Off function. 30S, 30M, 60M To select the desired time. REAR/SUB Switches the audio output. REAR OUT To set to the power amplifier. Unit off. SUB OUT (z) To set to the subwoofer. continue to next page t

Item Option Purpose Unit status BLACKOUT Turns off the illumination automatically for any source (e.g, during playback/radio reception, etc.) if no operation is performed for 5 seconds. ON To turn off the illumination. To bring the light back on, press any button on the main unit. (When activated, remote operation is unavailable.) Any status. OFF (z) To deactivate the Black Out function. M.DSPL (Motion Display) ON (z) To show moving patterns. During radio reception/ playback. OFF To deactivate the Motion Display. DEMO (Demonstration) ON (z) To activate the demonstration. Unit off. OFF To deactivate the demonstration. DIMMER Changes the display brightness. ON To dim the display. Any status. OFF (z) To deactivate the dimmer. AUTO-SCRL (Auto Scroll) Scrolls long items automatically. ON (z) To scroll. During disc playback. OFF To not scroll. Item Option Purpose Unit status LOCAL (Local Seek Mode) ON To only tune into stations with stronger signals. During radio reception. OFF (z) To tune normal reception. MONO (Monaural Mode) Selects monaural reception mode to improve poor FM reception. ON To hear stereo broadcast in monaural. During FM reception. OFF (z) To hear stereo broadcast in stereo. BTM (Best Tuning Memory) (page 19) – – During radio reception.

*2 Appears only when “REAR/SUB” is set to “SUB OUT” (page 39). Item Option Purpose Unit status EQ7 TUNE (page 33) – – During radio reception/ playback. AUX-LEVEL (page 43) (–8 ~ +18) z: 0 To select the level. During AUX playback. DVD-LEVEL (page 24) ADJST-ON To allow for adjusting the output level of Dolby Digital format. During disc playback. ADJST-OFF (z) To deactivate the level adjustment. DOLBY-ADJ (Dolby Level Adjust) (page 24)*1 (–10 ~ +10) z: +8 To select the level. SP SETUP (Speaker Setup) LEVEL-ADJ (Level Adjust) To select the level (–6 ~ +6, 13 steps). Unit off. HPF-FREQ (High Pass Filter Frequency) To select the front/rear speaker cut-off frequency (OFF (z), 50HZ, 60HZ, 80HZ, 100HZ, 120HZ). During radio reception/ playback. LPF-FREQ (Low Pass Filter Frequency)*2 To select the subwoofer cut-off frequency (120HZ, 100HZ (z), 80HZ, 60HZ, 50HZ). LPF-PHASE (Low Pass Filter Phase)*2 To select the subwoofer phase (NORM (z), REV). POS TUNE (Position Tune) (page 32) To set the listening position (0 ~ 400 cm (0 and 13 1/10 ft)).

The clock uses a 12-hour indication. 1 Press (SYSTEM SETUP). The system setup item appears on the main unit. 2 Press M/m to select “CLOCK-ADJ,” then press (ENTER). The hour indication flashes. 3 Press M/m to set the hour and minute. To move the digital indication, press

1 Press (SRC) repeatedly until “AUX” appears on the main unit. 2 Press (MODE) to select “FRONT-IN” or “REAR-IN.” Operate by the auxiliary device itself. Adjusting the volume level Be sure to adjust the volume of each connected device before playback. 1 Turn down the volume on the unit. 2 Press (SRC) repeatedly until “AUX” appears on the main unit. If two auxiliary devices are connected, select the device to adjust its volume by pressing (MODE). 3 Start playback of the auxiliary device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Press (SYSTEM SETUP). 6 Press M/m to select “AUX-LEVEL,” then press (ENTER). 7 Press M/m to adjust the input level. The input level is adjustable in single steps, between –8 and +18. 8 Press (ENTER). The setting is complete. To hide the system setup display, press (SYSTEM SETUP). With the main unit Press (SOURCE/OFF) instead of (SRC), press and hold the control dial instead of pressing (SYSTEM SETUP), rotate the control dial instead of pressing M/m, press the control dial instead of (ENTER). Additional Information Precautions • Cool off the unit beforehand if your car has been parked in direct sunlight. • Power antenna (aerial) extends automatically. Moisture condensation Should moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly. To maintain high sound quality Do not splash liquid onto the unit or discs. Notes on discs • Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. • Before playing, wipe the discs with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners. • This unit is designed to play back discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit. • Discs that this unit CANNOT play – Discs with labels, stickers, or sticky tape or paper attached. Doing so may cause a malfunction, or may ruin the disc. – Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit. – 8 cm (3 1/4 in) discs. Note on playback operations of DVDs and VCDs Some playback operations of DVDs and VCDs may be intentionally set by software producers. Since this unit plays DVDs and VCDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VCDs. continue to next page t

• Some DATA CDs/DATA DVDs (depending on the equipment used for its recording, or the disc condition) may not play on this unit. • Finalization is required for some discs (page 44). • The unit is compatible with the following standards. For DATA CDs – ISO 9660 level 1/level 2 format, Joliet/Romeo in the expansion format – Multi Session For DATA DVDs – UDF Bridge format (combined UDF and ISO 9660) – Multi Border • The maximum number of: – folders (albums): 256 (including root and empty folders). – files (tracks/images/videos) and folders contained in a disc: 2,000 (if a folder/file names contain many characters, this number may become less than 2,000). – displayable characters for a folder/file name: 64 (Joliet/Romeo). Notes on finalizing discs The following discs are required to be finalized to play on this unit. • DVD-R/DVD-R DL (in video mode/VR mode) • DVD-RW in video mode • DVD+R/DVD+R DL • CD-R • CD-RW The following discs can be played without finalization. • DVD+RW – automatically finalized. • DVD-RW in VR mode – finalization not required. For details, see the manual supplied with the disc. Notes on Multi Session CDs/Multi Border DVDs This unit can play Multi Session CDs/Multi Border DVDs under the following conditions. Note that the session must be closed and the disc must be finalized. • When CD-DA (Compact Disc Digital Audio) is recorded in the first session: The unit recognizes the disc as CD-DA and only CD-DA of the first session is played, even if an other format (e.g., MP3) is recorded in other sessions. • When CD-DA is recorded other than in the first session: The unit recognizes the disc as a DATA CD or DATA DVD, and all CD-DA sessions are skipped. • When an MP3/WMA/AAC/JPEG/DivX/MPEG-4 is recorded: Only the sessions containing the selected file type (audio/video/image)* are played (if CD-DA or other data exists in other sessions, they are skipped). * For details on how to select the file type, see page 29. Playback order of MP3/WMA/AAC/ JPEG/DivX®/MPEG-4 files About MP3 files • MP3, which stands for MPEG-1 Audio Layer-3, is a music file compression format standard. It compresses audio CD data to approximately 1/10 of its original size. • ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to MP3 only. ID3 tag is 15/30 characters (1.0 and 1.1), or 63/126 characters (2.2, 2.3 and 2.4). • When naming an MP3 file, be sure to add the file extension “.mp3” to the file name. • During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3 file, elapsed playback time may not display accurately. Note on MP3 If you play a high-bit-rate MP3, such as 192 kbps, sound may be intermittent. Folder (album) MP3/WMA/AAC/ JPEG/DivX/ MPEG-4 file (track/image/ video) MP3/WMA/AAC/ JPEG/DivX/ MPEG-4

• WMA, which stands for Windows Media Audio, is a music file compression format standard. It compresses audio CD data to approximately 1/22* of its original size. • WMA tag is 63 characters. • When naming a WMA file, be sure to add the file extension “.wma” to the file name. • During playback or fast-forward/reverse of a VBR (Variable Bit Rate) WMA file, elapsed playback time may not display accurately. * only for 64 kbps Note on WMA Playback of the following WMA files is not supported. – lossless compression – copyright-protected About AAC files • AAC tag is 126 characters. • When naming an AAC file, be sure to add the file extension “.m4a” to the file name. About JPEG files • JPEG, which stands for Joint Photographic Experts Group, is an image file compression format standard. It compresses still images approximately 1/10 to 1/100 of original size. • When naming a JPEG file, be sure to add the file extension “.jpg” to the file name. Note on JPEG Playback of progressive JPEG files is not supported. About DivX video DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert files into DivX video. About DivX Video-on-Demand This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. About MPEG-4 files MPEG-4 files on a disc meeting the following requirements can be played. Playback is not be guaranteed for all MPEG-4 files meeting the requirements. • Profile: MPEG-4 Simple profile • Bit rate: Max. 10 Mbps on DVD, 7 Mbps on CD • Frame rate: Max. 30 fps • Image size: Max. 720 × 480 pixels • Audio: Max. 320 kbps (AAC-LC) • File extension: .mp4 If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. Maintenance Replacing the lithium battery of the card remote commander Under normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion. Notes on the lithium battery • Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. • Wipe the battery with a dry cloth to assure a good contact. • Be sure to observe the correct polarity when installing the battery. • Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. continue to next page t c + side up WARNING Battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire.

sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 13) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. Notes • For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. Removing the unit 1 Remove the protection collar. 1Detach the front panel (page 13). 2Pinch both edges of the protection collar, then pull it out. 2 Remove the unit. 1Insert both release keys simultaneously until they click. 2Pull the release keys to unseat the unit. 3Slide the unit out of the mounting. Fuse (10 A) Main unit Back of the front panel x Hook facing inwards.

Signal format system: PAL/NTSC switchable Tuner section FM Tuning range: 87.5 – 108.0 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 150 kHz Usable sensitivity: 10 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 70 dB (mono) Separation: 40 dB at 1 kHz Frequency response: 20 – 15,000 Hz AM Tuning range: 531 – 1,602 kHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 25 kHz Sensitivity: 26 µV DVD/CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 – 20,000 Hz Wow and flutter: Below measurable limit Harmonic distortion: 0.01 % Region code: Labeled on the bottom of the unit Power amplifier section Outputs: Speaker outputs Speaker impedance: 4 – 8 ohms Maximum power output: 52 W × 4 (at 4 ohms) General Outputs: Video output terminal Audio output terminals (rear/sub switchable) Power antenna (aerial) relay control terminal Power amplifier control terminal Inputs: AUX audio input terminals Remote controller input terminal Antenna (aerial) input terminal Parking break control terminal AUX input jack (stereo mini jack) Power requirements: 12 V DC car battery (negative ground (earth)) Dimensions: Approx. 178 × 50 × 179 mm (7 1/8 × 2 × 7 1/8 in) (w/h/d) Mounting dimensions: Approx. 182 × 53 × 162 mm (7 1/4 × 2 1/8 × 6 1/2 in) (w/h/d) Mass: Approx. 1.3 kg (2 lb 14 oz) Supplied accessories: Card remote commander: RM-X168 Parts for installation and connections (1 set) Optional accessory/equipment: Mobile monitor: XVM-B62 Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information. Design and specifications are subject to change without notice. Region code The region system is used to protect software copyrights. The region code is located on the bottom of the unit, and only DVDs labeled with an identical region code can be played on this unit. DVDs labeled can also be played. If you try to play any other DVD, the message “Playback prohibited by region code.” will appear on the monitor screen. Depending on the DVD, no region code may be labeled even though playing the DVD is prohibited by area restrictions. US and foreign patents licensed from Dolby Laboratories. MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. • Halogenated flame retardants are not used in the certain printed wiring boards. • Halogenated flame retardants are not used in cabinets. • Packaging cushions are made from paper. ALL

problems you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. Depending on the connected monitor, the unit may take a few seconds to turn off after turning the ignition off. This is not a malfunction. General No power is being supplied to the unit. • Check the connection or fuse. • If the unit is turned off and the display disappears, it cannot be operated with the remote commander. tTurn on the unit. The power antenna (aerial) does not extend. The power antenna (aerial) does not have a relay box. No beep sound. • The beep sound is canceled (page 39). • An optional power amplifier is connected and you are not using the built-in amplifier. The contents of the memory have been erased. • The RESET button has been pressed. tStore again into the memory. • The power supply lead or battery has been disconnected or it is not connected properly. Stored stations and correct time are erased. The fuse has blown. Makes noise when the position of the ignition is switched. The leads are not matched correctly with the car’s accessory power connector. The display disappears from/does not appear in the display window. • The dimmer is set “DIM-ON” (page 40). • The display disappears if you press and hold (SOURCE/OFF). tPress (SOURCE/OFF) on the unit until the display appears. • The connectors are dirty (page 46). The display disappears while the unit is operating. The Black Out function is set to on (page 40). The Auto Off function does not operate. The unit is turned on. The Auto Off function activates after turning off the unit. tTurn off the unit. Card remote commander operation is not possible. If the Black Out function is activated (no lighting), card remote commander operation is not possible (page 40). Radio reception The stations cannot be received. The sound is hampered by noises. • The connection is not correct. tConnect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has built-in FM/AM antenna (aerial) in the rear/side glass). tCheck the connection of the car antenna (aerial). tIf the auto antenna (aerial) will not go up, check the connection of the power antenna (aerial) control lead. Preset tuning is not possible. • Store the correct frequency in the memory. • The broadcast signal is too weak. Automatic tuning is not possible. • Setting of the local seek mode is not correct. tTuning stops too frequently: Set “LOCAL-ON” (page 40). tTuning does not stop at a station: Set “LOCAL-OFF” (page 40). • The broadcast signal is too weak. tPerform manual tuning. During FM reception, the “ST” indication flashes. • Tune in the frequency accurately. • The broadcast signal is too weak. tSet “MONO-ON” (page 40). An FM program broadcast in stereo is heard in monaural. The unit is in monaural reception mode. tSet “MONO-OFF” (page 40). RDS PTY displays “- - - - - - - -.” • The current station is not an RDS station. • RDS data has not been received. • The station does not specify the program type.

• A connection has not been made correctly. • Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit. • Defective or dirty disc. • Installation is not correct. tInstall the unit at an angle of less than 45° in a sturdy part of the car. • The monitor is connected to the AUDIO/VIDEO OUT, and the parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied. • The color system setting is incorrect. tSet the color system to “PAL” or “NTSC” according to the connected monitor (page 39). Picture does not fit in the screen. The aspect ratio is fixed on the DVD. Sound There is no sound/sound skips/sound cracks. • A connection has not been made correctly. • Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit. • Defective or dirty disc. • Installation is not correct. tInstall the unit at an angle of less than 45° in a sturdy part of the car. • The MP3 file sampling rate is not 32, 44.1, or 48 kHz. • The WMA file sampling rate is not 32, 44.1, or 48 kHz. • The AAC file sampling rate is not 44.1, or 48 kHz. • The MP3 file bit rate is not 48 to 192 kbps. • The WMA file bit rate is not 64 to 192 kbps. • The AAC file bit rate is not 40 to 320 kbps. • The unit is in pause/reverse/fast-forward mode. • The settings for the outputs are not made correctly. • The DVD output level is too low (page 24). • The volume is too low. • The ATT function is activated. • The position of the fader control “FAD” is not set for a 2-speaker system. • Unsupported format (such as DTS). tCheck if the format is supported by this unit (page 7). Sound is noisy. Keep cords and cables away from each other. Disc operation The disc cannot be loaded. • Another disc is already loaded. • The disc has been forcibly inserted upside down or in the wrong way. The disc does not play back. • Defective or dirty disc. • The disc is not applicable. • The DVD is not applicable due to the region code. • The disc is not finalized (page 44). • The disc format and file version are incompatible with this unit (page 7, 44). • Press Z to remove the disc. MP3/WMA/AAC/JPEG/DivX/MPEG-4 files do not play back. • Recording was not performed according to the ISO 9660 level 1 or level 2, the Joliet or Romeo in the expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 44). • The file extension is incorrect (page 44). • Files are not stored in MP3/WMA/AAC/JPEG/DivX/ MPEG-4 format. • If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. tSelect the appropriate file type using the list (page 29). MP3/WMA/AAC/JPEG/DivX/MPEG-4 files take longer to play back than others. The following discs take a longer time to start playback. – a disc recorded with a complicated tree structure. – a disc recorded in Multi Session/Multi Border. – a disc to which data can be added. The disc does not start playing from the beginning. Resume playback or multi-disc resume playback (page 36) has taken effect. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, see the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. • Use the DVD menu instead of the direct selection button on the card remote commander (page 15). • Multilingual tracks, multilingual subtitles, or multi- angles are not recorded on the DVD. • The DVD prohibits changing. The display items do not scroll. • For discs with very many characters, those may not scroll. • “AUTO-SCRL” is set to “OFF.” tSet “A.SCRL-ON” (page 40). The operation buttons do not function. The disc will not eject. Press the RESET button (page 12). You forgot the password for parental control. Enter “5776” in the password input display to unlock (page 26). continue to next page t

consult your nearest Sony dealer. If you take the unit to be repaired because of disc playback trouble, bring the disc that was used at the time the problem began. On the main unit ERROR • The disc is dirty or inserted upside down. tClean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play due to a problem. tInsert another disc. • The disc is not compatible with this unit. tInsert a compatible disc. • Press Z to remove the disc. FAILURE The connection of speakers/amplifiers is incorrect. tSee the supplied installation/connections manual to check the connection. L. SEEK +/– The local seek mode is on during automatic tuning. NO NAME A disc/album/folder/track/image/video name is not written in the file. OFFSET There may be an internal malfunction. tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer. READ The unit is reading all file/album (folder) information on the disc. tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. “ ” or “ ” During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further. “ ” The character cannot be displayed with the unit. On the monitor Cannot play this disc. • The disc is incompatible with this unit. • The disc is not finalized. No playable data. The disc does not contain playable data. Playback prohibited by region code. The DVD playback is prohibited due to the different region code.

Language code list The language spellings conform to the ISO 639: 1988 (E/F) standard. Area code list Code Language Code Language Code Language Code Language 1027 Afar 1028 Abkhazian 1032 Afrikaans 1039 Amharic 1044 Arabic 1045 Assamese 1051 Aymara 1052 Azerbaijani 1053 Bashkir 1057 Byelorussian 1059 Bulgarian 1060 Bihari 1061 Bislama 1066 Bengali; Bangla 1067 Tibetan 1070 Breton 1079 Catalan 1093 Corsican 1097 Czech 1103 Welsh 1105 Danish 1109 German 1130 Bhutani 1142 Greek 1144 English 1145 Esperanto 1149 Spanish 1150 Estonian 1151 Basque 1157 Persian 1165 Finnish 1166 Fiji 1171 Faroese 1174 French 1181 Frisian 1183 Irish 1186 Scots Gaelic 1194 Galician 1196 Guarani 1203 Gujarati 1209 Hausa 1217 Hindi 1226 Croatian 1229 Hungarian 1233 Armenian 1235 Interlingua 1239 Interlingue 1245 Inupiak 1248 Indonesian 1253 Icelandic 1254 Italian 1257 Hebrew 1261 Japanese 1269 Yiddish 1283 Javanese 1287 Georgian 1297 Kazakh 1298 Greenlandic 1299 Cambodian 1300 Kannada 1301 Korean 1305 Kashmiri 1307 Kurdish 1311 Kirghiz 1313 Latin 1326 Lingala 1327 Laothian 1332 Lithuanian 1334 Latvian; Lettish 1345 Malagasy 1347 Maori 1349 Macedonian 1350 Malayalam 1352 Mongolian 1353 Moldavian 1356 Marathi 1357 Malay 1358 Maltese 1363 Burmese 1365 Nauru 1369 Nepali 1376 Dutch 1379 Norwegian 1393 Occitan 1403 (Afan)Oromo 1408 Oriya 1417 Punjabi 1428 Polish 1435 Pashto; Pushto 1436 Portuguese 1463 Quechua 1481 Rhaeto- Romance 1482 Kirundi 1483 Romanian 1489 Russian 1491 Kinyarwanda 1495 Sanskrit 1498 Sindhi 1501 Sangho 1502 Serbo- Croatian 1503 Singhalese 1505 Slovak 1506 Slovenian 1507 Samoan 1508 Shona 1509 Somali 1511 Albanian 1512 Serbian 1513 Siswati 1514 Sesotho 1515 Sundanese 1516 Swedish 1517 Swahili 1521 Tamil 1525 Telugu 1527 Tajik 1528 Thai 1529 Tigrinya 1531 Turkmen 1532 Tagalog 1534 Setswana 1535 Tonga 1538 Turkish 1539 Tsonga 1540 Tatar 1543 Twi 1557 Ukrainian 1564 Urdu 1572 Uzbek 1581 Vietnamese 1587 Volapük 1613 Wolof 1632 Xhosa 1665 Yoruba 1684 Chinese 1697 Zulu 1703 Not specified Code Area Code Area Code Area Code Area 2044 Argentina 2047 Australia 2046 Austria 2057 Belgium 2070 Brazil 2079 Canada 2090 Chile 2092 China 2115 Denmark 2165 Finland 2174 France 2109 Germany 2248 India 2238 Indonesia 2254 Italy 2276 Japan 2304 Korea 2363 Malaysia 2362 Mexico 2376 Netherlands 2390 New Zealand 2379 Norway 2427 Pakistan 2424 Philippines 2436 Portugal 2489 Russia 2501 Singapore 2149 Spain 2499 Sweden 2086 Switzerland 2528 Thailand 2184 United Kingdom

Album (ALBUM) 28 Angle (ANGLE) 16 Area code 51 Audio (AUDIO) Channel 23 Format 23 Language 23, 35 Audio DRC (AUDIO DRC) 37 Audio setup (AUDIO SETUP) 37 Auto Off (AUTO-OFF) 39 Auto Scroll (AUTO-SCRL) 40 Auxiliary equipment 42 Auxiliary Level (AUX-LEVEL) 41, 43 B Balance (BAL) 30 Beep sound (BEEP) 39 Best Tuning Memory (BTM) 19 Black Out (BLACKOUT) 40 C Card remote commander 10, 12, 45 Center Speaker Organizer (CSO) 30 Chapter (CHAPTER) 28 Clock Adjust (CLOCK-ADJ) 42 Clock Time (CT) 19, 20, 39 Color System (COLOR-SYS) 39 CSO 31 Custom setup (CUSTOM SETUP) 36 D Demonstration (DEMO) 40 Dimmer (DIMMER) 40 Direct search play 28 Discs 7 Display setup (DISPLAY SETUP) 35 DivX deactivation (DivX DEACTIVATION) 36 DivX VOD 36 DivX® 7, 45 Dolby Digital 23, 24 Dolby Level Adjust (DOLBY-ADJ) 41 DVD Level (DVD-LEVEL) 24, 41 DVD menu 15 DVD’s top menu 15 Dynamic Range Control (DRC) 37 E EQ7 30, 33 F Fader (FAD) 30 File (FILE) 28 Folder (ALBUM) 28 Formats 7 Fuse 46 H High Pass Filter Frequency (HPF-FREQ) 41 I Image (IMAGE) 28 Initial setup 12 Intelligent Time Alignment 31, 32 J JPEG 7, 20, 45 L Language code 51 Language setup (LANGUAGE SETUP) 35 Level adjust (LEVEL-ADJ) 33, 41 List up 29 Listening position (POSITION, POS, POS TUNE) 12, 30, 31, 32, 37 Local Seek Mode (LOCAL) 40 Low Pass Filter Frequency (LPF-FREQ) 41 Low Pass Filter Phase (LPF-PHASE) 41 M Menu language (MENU) 35 Monaural Mode (MONO) 40 Monitor type (MONITOR TYPE) 35 Motion Display (M.DSPL) 40 MP3 7, 44 MPEG-4 7, 45 Multi Border DVD 44 Multi channel output (MULTI CH OUTPUT) 37 Multi Session CD 44 Multi-disc resume playback (MULTI-DISC RESUME) 36 N NTSC 39 P PAL 39 Parental control (PARENTAL CONTROL) 26, 36 Picture EQ (PICTURE EQ) 25, 35 Play list play (PLAY LIST PLAY) 36 Play mode menu 21 Playable discs 7 Playback control (PBC) 21, 36 Position Tune (POS TUNE) 32, 41 Program format 24 Program Types (PTY) 19, 20 Q Quick-BrowZer 29

Rear Bass Enhancer (RBE) 30, 31 Rear speaker (REAR) 39 Repeat play (REP) 27 Reset (RESET) 12, 37 Resume play 16, 18 Rotary Commander (RM) 39 S Setup menu System setup 38 Visual setup 34 Shuffle play (SHUF) 27 Slide show interval (SLIDE SHOW TIME) 36 Soundtrack language (AUDIO) 23, 35 Speaker Setup (SP SETUP) 12 Subtitle language (SUBTITLE) 16, 35 Subwoofer (SUB) 30, 39 Subwoofer position (SUB POSITION, POS SUB) 30, 32, 37 System setup 38 T Time/text information (TIME) 22, 28 Title (TITLE) 28 Track (TRACK) 28 V Visual setup 34 Volume 8 W Wallpaper (WALLPAPER) 35 WMA 7, 45 Z Zoom (CENTER ZOOM) 25