Sony D-E888 Operating Instructions Manual

The area code of the location in which you purchased the CD player is shown on upper left of the bar code label on the package. For accessories supplied with your CD player, check the area code of your model and see “Accessories (supplied/optional).” 3-221-766-22 (1) D-E888 D-EJ825 © 2000 Sony Corporation

product will increase eye hazard. Owner’s Record The model number is located at the rear and the serial number is located inside the lid of the CD player. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. ___________________ Serial No. ___________________ Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. For the customers in the USA and Canada DISPOSAL OF NICKEL METAL HYDRIDE BATTERY. NICKEL METAL HYDRIDE BATTERY. DISPOSE OF PROPERLY. You can return your unwanted nickel metal hydride batteries to your nearest Sony Service Center or Factory Service Center. Note: In some areas the disposal of nickel metal hydride batteries in household or business trash may be prohibited. For the Sony Service Center nearest you call 1-800- 222-SONY (United States only) For the Sony Factory Service Center nearest you call 416-499-SONY (Canada only) Caution: Do not handle damaged or leaking nickel metal hydride battery. For the customers in the USA and Canada This mark is available in the USA and Canada only RECYCLING NICKEL-CADMIUM BATTERIES Nickel-Cadmium batteries are recyclable. You can help preserve our environment by returning your unwanted batteries to your nearest point for collection, recycling or proper disposal. Note: In some areas the disposal of nickel-cadmium batteries in household or business trash may be prohibited. RBRC (Rechargeable Battery Recycling Corporation) advises you about spent battery collection by the following phone number. Call toll free number: 1-800-822-8837 (United States and Canada only) Caution: Do not handle damaged or leaking nickel- cadmium batteries. For the customers in the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. For the customers in Australia The supply cord of the AC power adaptor cannot be replaced; if the cord is damaged, the AC power adaptor should be discarded. The CE mark on the CD player is valid only for products marketed in the European Union.

Getting started Locating the controls ................................... 4 Playing a CD 1.Connect your CD player. ......................... 7 2.Insert a CD. ............................................. 7 3.Play a CD. ............................................... 8 Playback options Playing tracks repeatedly (Repeat play) .... 11 Playing a single track (Single play) ........... 11 Playing tracks in random order (Shuffle play)......................................... 11 Playing tracks in your favorite order (PGM play)............................................ 12 Available features G-PROTECTION function ........................ 13 Displaying CD text information ................ 13 Checking the remaining time on the CD and the number of tracks left ....................... 14 Emphasizing the bass sound (SOUND) .... 14 Protecting your hearing (AVLS) ................ 15 Locking the controls (HOLD) ................... 15 Turning off the operation beep sound........ 16 Turning off the LCD’s backlight ............... 16 Connecting your CD player Connecting a stereo system ....................... 17 Using your CD player in a car ................... 18 Connecting a power source Using the rechargeable batteries ................ 19 Using the dry batteries ............................... 21 Notes on the power source ........................ 22 Additional information Precautions ................................................ 23 Maintenance .............................................. 23 Troubleshooting ......................................... 24 Specifications ............................................ 26 Accessories (supplied/optional) ................ 27

For details, see pages in parentheses. CD player (front) CD player (inside) 6 x (stop) /CHG (charge) button (pages 8, 16, 19) 5 u (play/pause) button (page 8) 7 i (headphones) jack (page 7) qs AVLS switch (page 15) 1 EXT BATT (external battery)/ DC IN 4.5 V (external power input) jack (pages 7, 19, 21) 3 VOL +/– buttons (page 8) 2 LINE OUT (OPTICAL) jack (page 17) qd HOLD switch (page 15) 8 CHG (charge)/HOLD lamp (pages 15, 19) 9 OPEN switch (page 7) 4 ./> (AMS/search) buttons (page 8, 11, 12) q; Battery compartment (pages 19) CD player (rear) qa G-PRO (G- PROTECTION) switch (page 13)

operate this CD player with the remote control supplied with other CD players. qh x (stop) button (pages 8, 16) ql PLAY MODE button (pages 10 - 12, 16) qf Display (pages 9, 11 - 15) qk DISPLAY button (pages 13, 14) wf SOUND button (page 14) qg Rotary control N/>: play, AMS/search (pages 8, 11, 12) .: AMS/search (pages 8, 11, 12) VOL +/–: Pull the control in the direction of the arrow, and then turn it toward + or –. (page 8) w; RPT (repeat)/ENT (enter) button (pages 10 - 12) wa HOLD switch (page 15) qj Clip Getting started ws i (headphones) jack (page 7) wd X (pause) button (page 8)

You can carry your player and its battery case together using the supplied carrying case. Insert them into the proper places in the case as illustrated below.

1 Connect the AC power adaptor. 2 Connect the headphones/earphones with remote control. For models supplied with the AC plug adaptor If the AC power adaptor does not fit the AC outlet, use the AC plug adaptor. For models supplied with the remote control. • Connect the plug of the headphones/ earphones to the remote control. • Connect the headphones/earphones to the remote control firmly. A loose connection may cause noise during playback. Playing a CD You can also use rechargeable batteries, dry batteries and a car battery as a power source. to an AC outlet (Continued) AC power adaptor to i Headphones or Earphones u button to EXT BATT/DC IN 4.5V Playing a CD 2. Insert a CD. 1 Slide OPEN to open the CD player lid. 2 Place the CD on the tray and close the lid. OPEN switch Label side up

Play Turn the rotary control toward N/ > or . (press u for the CD player). Pause Press X (u for the CD player). Stop Press x (x/CHG for the CD player).*2 Find the beginning of the current track (AMS*1) Turn the rotary control toward . once.*2 Find the beginning of the previous tracks (AMS) Turn the rotary control toward . repeatedly.*2 Find the beginning of the next track (AMS) Turn the rotary control toward N/ > once.*2 Find the beginning of the succeeding tracks (AMS) Turn the rotary control toward N/ > repeatedly.*2 Go backwards quickly Turn the rotary control toward . and hold it.*2 Go forward quickly Turn the rotary control toward N/ > and hold it.*2 *1 Automatic Music Sensor *2 These operations can be done during both play and pause. 3. Play a CD. VOL +/ – 1 Turn the rotary control toward N/> or .. 2 Pull the rotary control in the direction of the arrow. 3 Adjust the volume by turning the rotary control toward VOL + or –. u 1 Press u. 2 Adjust the volume by pressing VOL + or –. N/> VOL– . VOL+

• When you turn the rotary control toward N/> or . (press u for the CD player) after changing the CD or turning off and on the player, the total number of tracks in the CD and total playing time appear for about two seconds. • During play, the track number and the elapsed playing time of the current track appear. • Between tracks, the time to the beginning of the next track appears with the “–” indication. • During pause, the elapsed playing time flashes. If the volume level does not increase Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing (AVLS).” Removing the CD Remove the CD while pressing the pivot in the center of the tray. Playing a CD

ENT (enter) button. PLAY MODE button Each time you press the button, you can change the playback mode. No indication (Normal play) “1” (Play a single track) “SHUF” (Play tracks in random order) “PGM” (Play tracks in your favorite order) RPT/ENT button RPT (repeat) You can repeat play that is selected using PLAY MODE. ENT (enter) You can select tracks for PGM play mode. Rotary control (N/>, .) x button

You can play tracks repeatedly in normal, single, shuffle and PGM play modes. During playback, press RPT/ENT. Note on ./> During Repeat play, you can locate the first track after the last track by turning the rotary control toward N/> repeatedly. You can also locate the last track after first track by turning the rotary control toward . repeatedly. Playing a single track (Single play) During playback, press PLAY MODE repeatedly until “1” appears. Playing tracks in random order (Shuffle play) During playback, press PLAY MODE repeatedly until “SHUF” appears. Playback options

You can program the CD player to play up to 64 tracks in your favorite order. 1 During playback, press PLAY MODE repeatedly until “PGM” appears. 2 Turn the rotary control toward N/> or . to select a track. 3 Press RPT/ENT to enter the selected track. “00” appears and the playing order increases by one. 4 Repeat steps 2 and 3 to select the tracks in your favorite order. 5 Press RPT/ENT until the PGM play starts. To check the program During programming: Press RPT/ENT repeatedly before step 5. During the PGM play: Press PLAY MODE repeatedly until “PGM” flashes, then press RPT/ENT. Each time you press RPT/ENT, the track number appears. Notes • When you finish entering the 64th track in step 3, the first selected track appears in the display. • If you select more than 64 tracks, the first selected tracks are erased. Track number Playing order

G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. When you set the G-PRO switch on your CD player to “2”, the G-PROTECTION function will be enhanced compared to “1.” To walk with the CD player and enjoy high quality CD sound using the G-PROTECTION function, set the G-PRO switch to “1.” While taking harder exercise, it is recommended that you set it to “2.” Set G-PRO (under the lid) to “1” or “2.” Note Sound may skip if: – the CD player receives stronger continuous shock than expected or – a dirty or scratched CD is played. Available features Displaying CD text information When you play a CD containing CD text information, the track name, disc name, artist name, etc., appear in the display. * While the CD player is reading the information on the CD, “READING” appears. Press DISPLAY. Each time you press the button, the display changes as follows: Normal play Press DISPLAY once. Press DISPLAY twice. ** Not displayed during single play, shuffle play or PGM play. Note CD text displayed on this CD player is in English only. Display on the remote control CD text appears in this portion.* Display Track number and name of the current track Track number and name of the current track/artist name The number of tracks left** and disc name/artist name “Track number” appears.

sound (SOUND) You can emphasize the bass-boosted sound. Press SOUND to select “BASS 1” or “BASS 2.” “BASS 2” enhances the bass sound more than “BASS 1.” Note If the sound is distorted when using the SOUND function, turn down the volume. The selected sound mode is displayed. Checking the remaining time on the CD and the number of tracks left You can check the remaining time on the CD and the number of tracks left using DISPLAY. When playing a CD containing CD text information, you cannot use this function. Press DISPLAY. Each time you press the button, the display changes as follows. Normal play Press DISPLAY once. Press DISPLAY twice. * Not displayed during Single play, Shuffle play or PGM play. Display Track number and elapsed playing time The number of tracks left* and remaining time on the CD* Track number and remaining time on the current track No indication (Normal play) BASS 2 BASS 1

(HOLD) You can lock the controls on your CD player to prevent accidental button presses. Slide HOLD in the direction of the arrow. You can use the HOLD function with both the CD player and remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the opposite direction of the arrow. Note Even if the HOLD function is working, “HOLD” will not appear in the display of the remote control. CD player Remote control CHG/HOLD lamp flashes while the HOLD function is working. Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your hearing. Set AVLS to “LIMIT.” To turn off the AVLS function Set AVLS to “NORM.” Appears when the volume is turned up and beyond a certain level. Available features

operation beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. 1 Remove the power source (AC power adaptor, rechargeable batteries or dry batteries) from the CD player. 2 Connect the power source while pressing x (x/CHG for the CD player). To turn on the beep sound Remove the power source and then connect the power source without pressing x or x/CHG. Turning off the LCD’s backlight (only for the model supplied with the remote control RM-MC11EL) While you are using the rechargeable batteries or dry batteries, the LCD’s backlight turns on for about 5 seconds every time you press a button. However, you can turn off the backlight to save the battery power. 1 Remove the rechargeable batteries or dry batteries from the CD player. 2 Insert the batteries while pressing PLAY MODE. To turn on the LCD’s backlight Remove the batteries and then insert the batteries without pressing PLAY MODE. About the LCD’s backlight The LCD’s backlight is always turned on when using the AC power adaptor or car battery.

system You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. For details, see the instruction manual that comes with the connected device. Be sure to turn off all connected devices before making connections. Notes • Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. • Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording. • Adjust the volume properly on the connected device so that the sound will not be distorted. When using the connecting cord If the sound is distorted, connect the device to the i jack. When using the optical digital connecting cord To record a CD on a MiniDisc, DAT, etc., make sure that the CD player is in pause before operating the recording procedures. About the G-PROTECTION and SOUND functions when using the connecting cord or optical digital connecting cord • To record high quality CD sound, set the G-PRO switch to “1.” • The SOUND function works only on the output sound from the i jack and not work on the output sound from the LINE OUT (OPTICAL) jack. Stereo system, cassette recorder, radio cassette recorder, etc. to LINE OUT (OPTICAL) B Connecting your CD player MiniDisc recorder, DAT deck, etc. Optical digital connecting cord Connecting your CD player Left (white) Right (red) Connecting cord (Continued)

a car You can use your CD player in a car by connecting it to the car cassette deck. You cannot use the car mount plate for this CD player. When you use your CD player in a car, install it securely in a location that does not interfere with your driving. Optional car accessory needed To connect your CD player to a car cassette deck, you need the following car accessories in “Accessories (supplied/optional)”: • Car battery cord, and • Car connecting pack* For details, see the instruction manuals that come with the optional accessories. * Noise may be heard if you use an optional connecting cord. It is recommended that you use a Sony car connecting pack to reduce noise. Switched ignition function (when using the car battery cord) With this feature, your CD player stops automatically when you turn off the car engine (turn off the ignition key) even if the batteries are inserted in the CD player. This function is invalid depending on the car models. Note Use only the car battery cord listed in “Accessories (supplied/optional).” If you use any other car battery cord, a heat, smoke or malfunction may occur. Connecting a stereo system About Joint Text (CD text copying function) The Joint Text function allows you to copy the disc and track names that are on a CD containing CD text information. By connecting a Sony MD Walkman (MZ-R90/ R91), which supports Joint Text, to this CD player, you can copy the CD text onto an MD during recording. You must use an optical digital connecting cable (POC-5B or other model, not supplied) and the RK-TXT1 CD text connecting cable (not supplied) to make the connections. For details, refer to the operating instructions of the MD Walkman.

• Rechargeable batteries • AC power adaptor (see “Playing a CD”) • LR6 (size AA) alkaline batteries (external battery case) For the battery life and charging time of the rechargeable batteries, see “Specifications.” Using the rechargeable batteries Charge the rechargeable batteries before using them for the first time. You can use only the following rechargeable batteries for your CD player. • NC-6WM • NH-14WM 1 Open the battery compartment lid inside your CD player. 2 Insert two rechargeable batteries by matching the 3 to the diagram in the battery compartment and close the lid until it clicks into place. 3 Connect the AC power adaptor to the EXT BATT/DC IN 4.5 V jack of your CD player and an AC outlet, then press x/CHG to start charging. If the AC power adaptor does not fit the AC outlet, use the AC plug adaptor. The CD player charges the batteries. The indicator sections of in the display of the remote control light up in succession and the CHG/HOLD lamp lights up. When the batteries are completely charged, all indications in the display disappear and the CHG/HOLD lamp goes off. If you press x/CHG after the charge has already been completed, the indicator flashes and “FULL” appears in the display. 4 Disconnect the AC power adaptor. B Connecting a power source to an AC outlet to EXT BATT/ DC IN 4.5 V x/CHG button Put the end of the ribbon inside. Connecting a power source (Continued) CHG/HOLD lamp AC power adaptor

To remove the rechargeable batteries Pull the ribbon. When to charge the rechargeable batteries You can check the remaining power of the batteries in the display. Battery power is full. Battery power is getting low. Battery power is low. Lobatt* Batteries are depleted. * Beep sounds. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted. Notes • The indicator sections of roughly show the remaining battery power. One section does not always indicate one-fourth of the battery power. • Depending on operating conditions, the indicator sections of may increase or decrease. When to replace the rechargeable batteries If the battery life becomes shorter by about half, replace the batteries with new rechargeable batteries. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. Note on carrying the rechargeable batteries Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit. r r r ○ ○ ○ ○ ○ ○ ○ ○ r r

DC IN 4.5 V With the v side down Connecting a power source r r r r ○ ○ ○ ○ r ○ ○ ○ ○ ○ Using the dry batteries Make sure to use the supplied external battery case. Use only the following dry battery type for your CD player: • LR6 (size AA) alkaline batteries 1 Unlock the cap of the external battery case, and insert two LR6 (size AA) alkaline batteries by matching the 3 to the diagram outside the external battery case and close the cap of the external battery case. 2 Connect the external battery case to the CD player. When to replace the batteries You can check the remaining power of the batteries in the display. Battery power is full. Battery power is getting low. Battery power is low. Lobatt* Batteries are depleted. * Beep sounds. When the batteries are depleted, replace both batteries with new ones. The batteries in the CD player and external battery case are discharged simultaneously. Notes • Be sure to remove the AC power adaptor when attaching the external battery case. • When using the rechargeable batteries and dry batteries together to extend power, use fully charged rechargeable batteries and new dry batteries.

source Disconnect all power sources when the CD player is not used. On AC power adaptor • Use only the AC power adaptor supplied or recommended in “Accessories (supplied/ optional).” Do not use any other AC power adaptor. It may cause a malfunction. Polarity of the plug • When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. Do not pull it by the cord. • Do not touch the AC power adaptor with wet hands. On rechargeable batteries and dry batteries • Do not charge the dry batteries. • Do not throw the batteries into fire. • Do not carry the batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery are accidentally contacted by a metallic object. • Do not mix rechargeable batteries with dry batteries. • Do not mix new batteries with old ones. • Do not use different types of batteries together. • When the batteries are not to be used for a long time, remove them. • If battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. In case the deposit adheres to you, wash it off thoroughly.

the CD player, unplug it and have it checked by qualified personnel before operating it any further. • Do not put any foreign objects in the DC IN 4.5 V (external power input) jack. On the CD player • Keep the lens on the CD player clean and do not touch it. If you do so, the lens may be damaged and the CD player will not operate properly. • Do not put any heavy object on top of the CD player. The CD player and the CD may be damaged. • Do not leave the CD player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, unleveled surface, or in a car with its windows closed. • If the CD player causes interference to the radio or television reception, turn off the CD player or move it away from the radio or television. On handling CDs • To keep the CD clean, handle it by its edge. Do not touch the surface. • Do not stick paper or tape onto the CD. • Do not expose the CD to direct sunlight or heat sources such as hot air ducts. Do not leave the CD in a car parked under direct sunlight. On headphones/earphones Road safety Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Preventing hearing damage Avoid using headphones/earphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Consideration for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you. Maintenance To clean the casing Use a soft cloth slightly moistened in water or a mild detergent solution. Do not use alcohol, benzine or thinner. B Additional information Not these ways Additional information

dealer. Symptom Cannot adjust the volume by turning the rotary control on the remote control. Cannot start play by turning the rotary control on the remote control. The volume does not increase even if you press the VOL + button repeatedly. No sound, or noise is heard. The playing time is too short when powered with the dry batteries. The playing time is too short when powered with the rechargeable batteries. When you press u, “Lobatt” or “00” appears in the display. The CD does not play. “HiDCin” appears in the display. The CD does not play or “Nodisc” appears in the display when a CD is placed in the CD player. CHG/HOLD lamp flashes when you press a button, and the CD does not play. Cannot adjust the volume with the VOL +/– buttons on the CD player. Cause and/or corrective actions c Pull the rotary control in the direction of the arrow indicated on the control, then turn the control toward VOL + or –. (page 8) c The rotary control is pulled out. Push the control back, then turn the control toward N/> or .. (page 8) c Set the AVLS switch to “NORM.” (page 15) c The headphones/earphones are connected to the LINE OUT (OPTICAL) jack. Connect them to the i jack. (page 7) c Connect the plugs firmly. (page 7) c Plugs are dirty. Clean the plugs with a dry soft cloth periodically. c Check that you are using alkaline batteries and not manganese batteries. (page 21) c Replace the batteries with new LR6 (size AA) alkaline batteries. (page 21) c Charge and discharge the rechargeable batteries several times. (pages 19, 20) c The rechargeable batteries are used up completely. Charge the batteries. (page 19) c Replace the batteries with new LR6 (size AA) alkaline batteries. (page 21) c Use only the AC power adaptor or car battery cord in “Accessories (supplied/optional).” (page 27) c Remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 7, 19, 21) c The buttons are locked. Slide the HOLD switch back. (page 15) c The CD is dirty or defective. (page 23) c Check that the CD is inserted with the label side up. (page 7) c Moisture condensation has occurred. Leave the CD player aside for several hours until the moisture evaporates. c Close the lid of the battery compartment firmly. (pages 19) c Make sure the batteries are inserted correctly. (pages 19, 21) c Connect the AC power adaptor to an AC outlet securely. (page 7) c The buttons are locked. Slide the HOLD switch back. (page 15) c The CD player is connected to an audio device. Adjust the volume using the volume control on the connected device. (page 17)

digital connection, the track number cannot be recorded correctly. The CD player does not start charging. Playback starts from the point you stopped. Rustlig noise of the CD is heard. Cause and/or corrective actions c Record the track number again using the MiniDisc recorder, DAT recorder, etc. (page 17) c See the instruction manual that comes with the recording device. (page 17) c During stop, press x/CHG. (page 19) c You pressed x on the remote control. Press x/CHG on the CD player. (page 19) c The resume function is working. Open the lid of the CD player; or remove all power sources, then insert the batteries or connect the AC power adaptor again. (pages 7, 19, 21) c Close the lid of the battery compartment firmly. (page 19) Additional information

Laser diode properties Material: GaAlAs Wavelength: λ = 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) D-A conversion 1-bit quartz time-axis control Frequency response 20 - 20 000 Hz +1 –2 dB (measured by EIAJ CP- 307) Output (at 4.5 V input level) Line output (stereo minijack) Output level 0.7 V rms at 47 kΩ Recommended load impedance over 10 kΩ Headphones (stereo minijack) Approx. 5 mW + Approx. 5 mW at 16 Ω (Approx. 0.5 mW + Approx. 0.5 mW at 16 Ω)* *For the customers in France Optical digital output (optical output connector) Output level: –21 - –15 dBm Wavelength: 630 - 690 nm at peak level Power requirements For the area code of the model you purchased, check the upper left side of the bar code on the package. • Two Sony NC-6WM rechargeable batteries: 2.4 V DC • Two Sony NH-14WM rechargeable batteries: 2.4 V DC • Two LR6 (size AA) batteries: 3 V DC • AC power adaptor (DC IN 4.5 V jack): U2/CA2/E92/MX2 model: 120 V, 60 Hz CED/CET/CEW/CEX/CE7/EE/EE1/E13/G5/ G6/G7/G8 model: 220 - 230 V, 50/60 Hz CEK/3CE7 model: 230 - 240 V, 50 Hz EA3 model: 110 - 240 V, 50/60 Hz AU2 model: 240 V, 50 Hz JE.W/E33 model: 100 - 240 V, 50/60 Hz HK2 model: 220 V, 50/60 Hz AR1/CN2 model: 220 V, 50 Hz • Sony DCC-E345 car battery cord for use on car battery: 4.5 V DC Battery life* (approx. hours) (When you use the CD player on a flat and stable surface.) Playing time varies depending on how the CD player is used. When using G-PROTECTION “1” “2” Two NC-6WM 15 14 (charged for about 4 hours**) Two NH-14WM 29 28 (charged for about 4 hours**) External battery case 50 48 (two alkaline batteries) Rechargeable batteries 65 61 NC-6WM and external battery case (two alkaline batteries) Rechargeable batteries 80 76 NH-14WM and external battery case (two alkaline batteries) * Measured value by the standard of EIAJ (Electronic Industries Association of Japan). ** Charging time varies depending on how the rechargeable battery is used. Operating temperature 5°C - 35°C (41°F - 95°F) Dimensions (w/h/d) (excluding projecting parts and controls) Approx. 127.2 × 18.4 × 135.6 mm (5 1⁄8 × 3⁄4 × 5 3⁄8 in.) Mass (excluding accessories) Approx. 175 g (6.2 oz) Design and specifications are subject to change without notice.

purchased the CD player, check the upper left side of the bar code on the package. AC power adaptor (1) Headphones/earphones with remote control (1) Rechargeable batteries (2) Battery carrying case (2) Carrying case (1) External battery case (1) AC plug adaptor (1)* * Supplied with JE.W and E33 models For US customers The AC power adaptor supplied is not intended to be serviced. Should the AC power adaptor cease to function in its intended manner, during the warranty period, the adaptor should be returned to your nearest Sony Service Center or Sony Authorized Repair Center for replacement, or after warranty period, it should be discarded. Optional accessories AC power adaptor AC-E45HG Active speaker system SRS-Z1 SRS-Z1000 Car battery cord DCC-E345 Car battery cord with car connecting pack DCC-E34CP Car connecting pack CPA-9C Connecting cord RK-G129 RK-G136 CD TEXT connecting cable RK-TXT1 Optical digital connecting cord POC-5B POC-10B POC-15B POC-5AB POC-10AB POC-15AB Rechargeable battery NH-14WM NC-6WM Earphones MDR-E848LP MDR-EX70LP MDR-A44L MDR-A110LP When connecting optional headphones/earphones to the supplied remote control Use only headphones with stereo mini plugs. You cannot use headphones with micro plugs. Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information about the accessories in your country. Stereo miniplug Micro plug Additional information