Panasonic WVNF302 - NETWORK CAMERA Operating Instructions Manual

Images displayed on the "Live" page can be recorded on the SD memory card manually. This button is operable only when "Manual" is selected for "Save trigger" on the setup menu. ( Setup Instructions) Images recorded on the SD memory card can be copied onto the PC. ( Setup Instructions) Step 1 Display the "Live" page. ( page 4) Step 2 Click the [SD] button in the "SD memory card" box. →The SD recording window will open. Step 3 Click the [Start] button to start recording images on the SD memory card. →The SD recording status indicator will lig ...

transmit using the FTP periodic transmission function Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card. Images saved on the SD memory card can be obtained from the [SD memory card] tab of the "Basic" page. ( Setup Instructions) To use the SD memory recording function featured in Panasonic’s network disk recorder, select "Off" for "FTP peri- odic transmission" ( Setup Instructions) and "FTP error" for "Save trigger" ( Setup Instructions). We make no guarantee f ...

The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Important: • To enhance the security, change the password for the user "admin". It is recommended to change this password periodically. • When displaying multiple MPEG-4 images on a PC, images may not be displayed depending on the per- formance of the PC. Notes: • Up to 16 users can access the camera concurrently regardless of the image type (JPEG/MPEG-4) that the current access users are monitoring. Depending on the set values for "Bandwidth contr ...

• When "On" is selected for "MPEG-4 transmission" JPEG (VGA or QVGA): 15 fps JPEG (1 280 x 960): 5 fps • When "Off" is selected for "MPEG-4 transmission" JPEG (VGA or QVGA): 30 fps JPEG (1 280 x 960): 11 fps The refresh interval may be longer depending on a network environment, PC spec, photographic sub- ject, access traffic, etc. Refer to the following page for further information about the "Live" page. About the "Live" page q [Setup] button *1 Click this button to display the setup menu. The but- ton will turn green and the setup menu will be dis- played. w ...

The following logs can be displayed in list form. • Alarm log: Logs of the alarm occurrences such as time and date of the alarm occurrences and the alarm type will be displayed. • Manual log: Logs filed when images have been recorded on the SD memory card will be displayed. • FTP trans. error log: Logs filed when the FTP periodic transmission function has failed will be displayed. Each log list can be displayed only when "On" is selected for "Save logs" on the [Log] tab of the "Basic" page ( Setup Instructions) respectively. Step 1 Display the "Live" page. ( pag ...

There are 3 sets of operating instructions as follows. • Installation Guide • Operating instructions • Setup Instructions These operating instructions contain descriptions of how to operate this product* using a PC via a network and of how to configure the settings. Refer to the installation guide for descriptions of how to install this product and of how to connect to a network. Adobe® Reader® is required to read PDF. When the Adobe Reader is not installed on the PC, download the latest Adobe Reader from the Adobe web site and install it. T ...