Panasonic AVM3P (PS) Manual 

available • Long life • Precise operating position (±0.25mm: Pin plunger type) • Flux-resistant construction with integrally molded terminals • In-line terminals make soldering works easy • UL/CSA approved TYPICAL APPLICATIONS • Heaters • Electric rice cookers • Copiers • Printers • Facsimiles • Vending machines • Measuring equipment • Audio equipment Type of switch PS switch Actuators 0: 1: 2: 3: 4: 5: Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Terminals 1: 2: 3: 4: Self-standing solder terminal with guard Self-standing solder terminal without guard Self-standing solder terminal with opposite side guard Self-standing PC terminal Operating force by pin plunger, max. 5: 1.47 N Capacity P: High capacity (10.1 A) Agency standard 9: UL/CSA Ex. AVM3 1 0 5 P 9 CONSTRUCTION CONTACT ARRANGEMENT: SPDT DATA Electrical life curve COM NO NC 30 10 20 3 5 1 0 5 10 Load current (A) No. of operations, ×104 AECTB12E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e RoHS compliant

2. Characteristics 3. Operating characteristics DIMENSIONS Contact Actuator Part No. Self-standing solder terminal Self-standing PC terminal Without guard With guard With opposite side guard Gold-clad Pin plunger AVM3205P9 AVM3105P9 AVM3305P9 AVM3405P9 Short hinge lever AVM3215P9 AVM3115P9 AVM3315P9 AVM3415P9 Hinge lever AVM3225P9 AVM3125P9 AVM3325P9 AVM3425P9 Long hinge lever AVM3235P9 AVM3135P9 AVM3335P9 AVM3435P9 Simulated roller lever AVM3245P9 AVM3145P9 AVM3345P9 AVM3445P9 Roller lever AVM3255P9 AVM3155P9 AVM3355P9 AVM3455P9 Resistive load (cos φ ] 1) 10.1A, 250V AC Expected life Electrical Min. 5 × 104 (at 20 cpm) (O.T. max.) Mechanical Min. 3 × 107 (O.T.: Specified value), at 60 cpm Dielectric strength Between terminals 1,000 Vrms for 1 min. (at 10 mA) Between terminals and other exposed metal parts 2,000 Vrms for 1 min. (at 10 mA) Between terminals and ground 2,000 Vrms for 1 min. (at 10 mA) Insulation resistance Min. 100MΩ (at 500V DC) Contact resistance (initial) Max. 50mΩ (By voltage drop, 1A 6 to 8V DC) Allowable operating speed (at no load) 0.1 to 1,000 mm/sec. Max. operating cycle rate (at no load) 300 cpm Ambient temperature –25 to +85°C (Not freezing below 0°C) Unit weight Approx. 2g Contact material AgNi alloy Actuator Operating force, Max. Release force, Min. Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min. mm Operating position mm Pin plunger 1.47 N 0.20 N 0.6 mm 0.1 mm 0.4 mm 8.4±0.25 mm Short hinge lever 0.59 N 0.039 N 2.5 mm 0.5 mm 0.8 mm 8.8±0.8 mm Hinge lever 0.54 N 0.034 N 2.8 mm 0.8 mm 1.2 mm 8.8±0.8 mm Long hinge lever 0.44 N 0.029 N 3.5 mm 1.0 mm 1.6 mm 8.8±1.2 mm Simulated roller lever 0.54 N 0.034 N 2.8 mm 0.8 mm 1.2 mm 11.65±0.8 mm Roller lever 0.59 N 0.039 N 2.5 mm 0.5 mm 0.8 mm 14.5±0.8 mm mm General tolerance: ±0.25 1. Self-standing PC terminal (Without guard) Pin plunger 2.2 NO NC C 0.5 0.6 max. 8.7 15.4 0.9 7.4 0.75 9.5 1.8 6.4 5.2 1.25 0.5 4.0 (P.T.) 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 7.6 ±0.3 ±0.1 ±0.15 ±0.15 ±0.3 ±0.1 2.2 ±0.1 ±0.15 3.4 ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 6.7 8.4 ±0.25 (O.P.) 11.8 (O.P.) ±0.35 2.4 dia. +0.1 -0.05 PC board pattern 8.7 ±0.15 15.4 ±0.1 Pin plunger position (10.55) 3-1.2 dia. ±0.05 Pretravel, Max. mm 0.6 Movement differential, Max. mm 0.1 Overtravel, Min mm 0.4 Operating position Distance from mounting hole, mm 8.4±0.25 CAD Data AECTB12E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e

12.85 NO NC C 5.0 ±0.4 2.5 max. 6.4 5.2 1.25 0.5 4.0 (P.T.) ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 2.2 0.5 8.7 15.4 0.9 7.4 0.75 9.5 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 ±0.1 ±0.15 ±0.15 ±0.3 ±0.1 2.2 ±0.1 ±0.15 3.4 6.7 8.8 ±0.8 (O.P.) 12.2 (O.P.) ±0.9 2.4 dia. +0.1 -0.05 Pretravel, Max. mm 2.5 Movement differential, Max. mm 0.5 Overtravel, Min mm 0.8 Operating position Distance from mounting hole, mm 8.8±0.8 mm General tolerance: ±0.25 CAD Data Hinge lever NO NC C 7.15 ±0.4 12.85 2.8 max. 6.4 5.2 1.25 0.5 4.0 (P.T.) ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 2.2 0.5 8.7 15.4 0.9 7.4 0.75 9.5 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 ±0.1 ±0.15 ±0.15 ±0.3 ±0.1 2.2 ±0.1 ±0.15 3.4 6.7 8.8 ±0.8 (O.P.) 12.2 (O.P.) ±0.9 2.4 dia. +0.1 -0.05 Pretravel, Max. mm 2.8 Movement differential, Max. mm 0.8 Overtravel, Min mm 1.2 Operating position Distance from mounting hole, mm 8.8±0.8 CAD Data Long hinge lever NO NC C 13.1 ±0.4 12.85 3.5 max. 6.4 5.2 1.25 0.5 4.0 (P.T.) ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 2.2 0.5 8.7 15.4 0.9 7.4 0.75 9.5 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 ±0.1 ±0.15 ±0.15 ±0.3 ±0.1 2.2 ±0.1 ±0.15 3.4 6.7 8.8 ±1.2 (O.P.) 12.2 (O.P.) ±1.3 2.4 dia. +0.1 -0.05 Pretravel, Max. mm 3.5 Movement differential, Max. mm 1.0 Overtravel, Min mm 1.6 Operating position Distance from mounting hole, mm 8.8±1.2 CAD Data AECTB12E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e

mm General tolerance: ±0.25 R2.5 NO NC C 6.3 ±0.4 12.85 2.8 max. 6.4 5.2 1.25 0.5 4.0 (P.T.) ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 2.2 0.5 8.7 15.4 0.9 7.4 0.75 9.5 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 ±0.1 ±0.15 ±0.15 ±0.3 ±0.1 2.2 ±0.1 ±0.15 3.4 6.7 2.4 dia. +0.1 -0.05 11.65 ±0.8 (O.P.) 15.05 (O.P.) ±0.9 Pretravel, Max. mm 2.8 Movement differential, Max. mm 0.8 Overtravel, Min mm 1.2 Operating position Distance from mounting hole, mm 11.65±0.8 CAD Data Roller lever 3.2 5.0 dia. NO NC C 2.5 max. 6.4 5.2 1.25 0.5 (P.T.) ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 2.2 0.5 8.7 15.4 0.9 7.4 0.75 9.5 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 ±0.1 ±0.15 ±0.15 ±0.3 ±0.1 2.2 ±0.1 ±0.15 3.4 6.7 2.4 dia. +0.1 -0.05 14.5 ±0.8 (O.P.) 17.9 (O.P.) ±0.9 5.15 ±0.4 12.85 Pretravel, Max. mm 2.5 Movement differential, Max. mm 0.5 Overtravel, Min mm 0.8 Operating position Distance from mounting hole, mm 14.5±0.8 CAD Data 2. Self-standing solder terminal Pin plunger 0.6 max. 8.7 15.4 R0.8 2.4 2.8 7.4 9.5 1.8 6.4 5.2 1.25 0.5 4.0 (P.T.) 7.7 -0.05 +0.1 2.4 2.4 19.8 2.5 NO NC C 7.6 ±0.3 ±0.1 ±0.15 ±0.15 ±0.3 ±0.2 2.2 ±0.1 ±0.15 3.4 R0.6 ±0.1 ±0.2 1.1 ±0.12 1.5 ±0.12 1.85 ±0.2 6.7 8.4 ±0.25 (O.P.) 11.8 (O.P.) ±0.35 2.4 dia. +0.1 -0.05 With guard 8* 24 With opposite side guard 24 8* * The height from the center of mounting hole to the edge of guard. CAD Data AECTB12E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e

1) Use flat filister head M2.3 screws to mount switches with less than a 0.29 N·m torque. Use of screws washers or adhesive lock is recommended to prevent loosening of the screws. 2) Check insulation distance between ground and each terminal. 3) When the operation object is in the free position, force should not be applied directly to the actuator or pin plunger from vertical direction to the switch. 4) In setting the movement after operation, the over-travel should be set more than 70% as a standard. Setting the movement at less than 70% of O.T. may cause troubles such as miscontact and welding due to small contact force of the switch. 5) For a lever type, the force from the reverse and side to the operation direction should not be applied. 2. Soldering operations Manual soldering should be accomplished within 3 seconds with max. 350°C iron. Care should be taken not to apply force to the terminals during soldering. Terminal portions must not be moved in min.1 minute after soldering. Also no tensile strength of lead wires should be applied to terminals. 3. Selection of the switch When specifying the switch, allow ±20% to the listed operating characteristics. 4. Environment Avoid using the switches in the following conditions; • In corrosive gases, such as silicon gas • In a dusty environment 5. Cautions regarding use When switching low-level circuits (6V DC 5mA, 12V DC 2mA, 24V DC 1mA), AV, AV3/AVT3, AVL3 Au clad contact type switches are recommended. When used to switch inductive loads (relays, solenoids, buzzers, etc.), it is recommended that a proper spark quench circuit is inserted in the switch to prevent contact faults caused by electric arcs. Care should be taken that occurrence in AC load possibly shorten the expected life. 6. Quality check under actual loading conditions To assure reliability, check the switch under actual loading conditions. Avoid any situation that may adversely affect switching performance. AECTB12E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e