Sony DVP-CX777ES Integration Notes
Read Online
Read the Sony DVP-CX777ES Integration Notes online using the built-in PDF viewer.
Text of the manual
HomeLogic LLC 100 Hoods Lane Marblehead, MA 09145 Phone (781) 639-5155 Fax (781) 639-9677
OneHome
DVD Integration Note
Manufacturer:
Sony
Model Number(s):
DVP-CX777ES
Comments:
Document Revision Date:
1/10/2006
OVERVIEW AND SUPPORTED FEATURES
The DVD players include an RS-232 connection which is used to connect to the OneHome system and
provide communications, enabling reliable control of the DVD player.
IMPORTANT: This Integration Note covers the Sony DVD changer connected directly to the
OneHome System. It is also possible to integrate the DVD changer through a DVD media server,
such as the Escient DVDM-100: refer to the Integration Note for the compatible media server.
THESE DVD PLAYERS SUPPORT THE FOLLOWING FEATURES:
Basic Transport Control: Play, stop, etc.
Disc Selection: Select the desired disc.
DVD Information: The Viewer interface displays limited information about each DVD, using the
Carrousel + Select interface template.
INSTALLATION OVERVIEW
1. During the rough-in phase install the necessary power and A/V cabling for the DVD player.
2. Also during the rough-in phase, run a Cat5 wire from the location of the DVD player back to the
Network Assembly of the OneHome system to provide the serial connection needed to control the
receiver. Refer to the RS-232 Connection Options Integration Note for other serial connection
options.
3. Install the DVD player and other theater components.
4. Test the DVD player with the other theater components to ensure that the audio and video play
correctly.
5. Connect the OneHome system to the DVD player electrically. See the connection diagram for more
information.
6. Configure the OneHome system for the DVD player and confirm communication between the DVD
player and the HomeBrick.
7. Test the system by playing a DVD with the various transport controls.
2 of 4
CONNECTION DIAGRAMS
BILL OF MATERIALS
#
Device
Manufacturer
Part Number
Protocol
Connector Type
Notes
1
DB9F to RJ45 NULL Adapter
HomeLogic
HA-CB-328
RS-232
DB-9 Female X RJ-45 Female
2
Cat5 Cable Assy.
Installer
N/A
RS-232
RJ-45 Male X Wire
3
Network Assembly
HomeLogic
HW-NA-18X4
RS-232
RJ-45 Female X DB-9 Female / USB
4
HomeBrick
HomeLogic
HW-HB-1080
RS-232
DB9 Male / USB
3 of 4
HOMELOGIC CONFIGURATION DETAILS
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
o
“