Sony RDR-GX310 Operating Instructions Manual

select “Rec Settings,” and press ENTER. 2 Select the item you want to adjust, and press ENTER. The adjustment display appears. Example: Rec NR “Rec Mode”: Selects the recording mode for the desired recording time and picture quality. For more information, see “Recording mode” on page 40. “DVD Rec. Picture Size”: Sets the picture size of the program to be recorded. • 4:3 (default): Sets the picture size to 4:3. • 16:9: Sets the picture size to 16:9 (wide mode). “DVD Rec. Picture Size” works with DVD- Rs and DVD ...

The “Audio” setup allows you to adjust the sound according to the playback and connection conditions. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “SETUP,” and press ENTER. 3 Select “Audio,” and press ENTER. The “Audio” setup appears with the following options. The default settings are underlined. Audio ATT (attenuation) If the playback sound is distorted, set this item to “On.” The recorder reduces the audio output level. This function affects the output of the following jacks: – LINE OUT (R-AUDIO-L) jacks Audio DRC (Dynamic ...

Settings/Factory Settings (Options) The “Options” setup allows you to set up other operational settings. 1 Press SYSTEM MENU while the recorder is in stop mode. 2 Select “SETUP,” and press ENTER. 3 Select “Options,” and press ENTER. The “Options” setup appears with the following options. The default settings are underlined. Format DVD-RW (DVD-RW only) The recorder automatically starts formatting in VR mode or Video mode, whichever is selected below, when a new, unformatted DVD-RW is inserted. Dimmer Adjusts the lighting of the front panel display. b N ...

Slow-motion play 54 Sort 33 Sound quality 55 Stereo 41 Stereo programs 41 “Stereo1” 71 “Stereo2” 71 STOP 51 SUBTITLE 53 Subtitle 75 Super VIDEO CD 10 SUR 53 Surround 53 Synchro Rec 48 T Thumbnail picture 33 “Time Search” 58 TIME/TEXT 35 TIMER 42 Timer List 46 Timer recording check/change/cancel 46 G-Code 43 manual setting 41 Rec Mode Adjust 42 Synchro Rec 48 Title 34, 99 TITLE LIST 51 Title List 32, 51 Sort 33 Thumbnail 33 “Title Name” 64 Title number 34 “Title Search” 58 TOP MENU 51 Track 99 “Track Search” 58 Troubleshooting 84 “Tuner ...

3 Select a title by pressing

Seven Basic Operations — Getting to Know Your DVD Recorder 1. Inserting and Formatting a DVD Disc (Disc Info) 1 Press Z OPEN/CLOSE, and place a disc on the disc tray. 2 Press Z OPEN/CLOSE to close the disc tray. Wait until “LOAD” disappears from the front panel display. Unused DVDs are formatted automatically. New discs are automatically formatted when inserted. If necessary, you can manually re-format a DVD+RW or DVD-RW disc to make a blank disc. For DVD-RWs, you can select a recording format (VR mode or Video mode) accordi ...

track/file names when you store the tracks (or files) in a disc, the tracks and files will be played in that order. • Since a disc with many trees takes longer to start playback, it is recommended that you create albums with no more than two trees. b Notes • Depending on the software you use to create the DATA DVD/DATA CD, the playback order may differ from the above illustration. • No more than a total of 199 individual folders can be played. (Folders that do not contain JPEG/MP3 files are counted as well.) • No ...

transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronics Engineers. i.LINK’s maximum baud rate varies according to the equipment. Three maximum baud rates are defined: S100 (approx. 100 Mbps*) S200 (approx. 200 Mbps) S400 (approx. 400 Mbps) The baud rate is listed under “Specifications” in the instruction manual of each equipment. It is also indicated near the i.LINK jack on some equipment. ...