ParaBody 828104 Assembly Instructions

WELCOME TO THE WORLD OF ~~$ Please note: * Thank you for purchasing the Parabody 828104 FLAT BENCH. Please read these instructions thorougt~y and keep. them for ~:ture ie~er~: Tiffs p~odU~t must be assembled on a flat, level surface to assure its propel function: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your Parabody customer service representative at (800) 328-9714. There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules: 1. Inspect equipment daily. Tighten all loose connections and replace wom parts immediately. Failure to do so may result in serious injury. 2. Do not allow minors or children to play on or around this equipment. 3. Exercise with care to avoid injury. 4. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714. Tools Required for Assembly I * 9/16" wrench * Ratchet with 9/16" socket * Adjustable wrench * Tape measure I Bolt Length Ruler [ NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. BOLT LENGTH RULER: BOLT LENGTH 1/2 [ 1/2 [ 1/2 [ 1/2 ] 1/2 ] 1/2 [ 3 1 2 ]111 ,l[[,,,],, I,,[lll]lll I 4 5 6

PAD ASSEMBLY KEY PART# 5 3102802 6 3102904 7, 6467001 ¯ DI~CRIPTION 3/~ ~" LOCKNUT 3 ’8 X 3" BOLT 2" ,’;Q COVER CAP . 4 6 4 STEP 1: ¯ Insert two 2" SQ. COVER CAPS (7) into the ends of the TUBE (2) as shownin FIGURE ¯ SECURELY assemble thetwo TUBES (2) to the BENCH FRAME (1) using four 3/8 X 3" BOLTS (6), eight WASHERS (4), and four 3/8" LOCK NUTS (5). See FIGURE 3

FRAME (1) using two 3/8" X 3" BOLTS (6), two WASHERS (4). See FIGUKE THIS CONCLUDES THE ASSEMBLY OF THE 828104 FI.,~kT BENCH 112 I 1/2 [ 1/2 ] 1/2 [ 1/’2 I 1/2 I 5 6 4