ParaBody 886101 Assembly Instructions
Text of the manual
Tools Required for Assembly
* Thank you for purchasing the Parabody 886101 ARM CURL ATTACHMENT. Please read
these instructions thoroughly and keep them for future reference. This product must be
assembled on a flat, level surface to assure its proper function.
* Ratchet with 9/16” socket or wrench
2
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your Parabody customer service representative
at (800) 328-9714.
Bolt Length Ruler
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
WELCOME TO THE WORLD OF Serious steel!
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
2. Do not allow minors or children to play on or around this equipment.
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
3. Exercise with care to avoid injury.
4. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at (800) 328-9714.
BOLT LENGTH
• SECURELY assemble the ARM PAD (2) to the ARM CURL FRAME (1) using two 3/8” X 1-1/4” BOLTS (3), two
3/8” LOCK WASHERS (5), and two 3/8” LOCK NUTS (4) as shown in FIGURE 1.
1
2
DESCRIPTION
ARM CURL FRAME
ARM PAD
3/8 X 1-1/4” BOLT
3/8” WASHER
3/8” LOCK WASHER
PART #
6418502
6533801
3102901
3102501
3102601
KEY
1
2
3
4
5
QTY
1
1
2
2
2
BENCH FRAME
3/8 X 1-3/4” 3
4
5
• Insert the ARM CURL ATTACHMENT into the UPRIGHT TUBE of the BENCH FRAME as shown in FIGURE 1,
and tighten in place using the THUMBSCREW.
Thank you for purchasing the PARABODY 886101 ARM CURL ATTACHMENT. If unsure of proper use of
equipment, call your local PARABODY distributor or call the PARABODY customer service department at
(800) 328-9714.
