Haier HWM65-0566 Operation & User’s Manual

Except water filling,and raining, if the top cover is opened, the washing machine will stop running and alarm. Description of the function of buttons 5 Use the operation buttons Page 15 Mode and meaning of the indicators The light is off Flashing: indicate the running program or indicate the water level On: indicate the program about to run, or indicate the selected mode or indicate the water level indicator digitron During sensing, it displays -- During delay procedure, it displays the remained delay time (in hours) During operation of programs, it displays the re ...

Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrai ...

machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from direct sunlight and heat source like the heater. Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Petrol Thinner Please keep the lint filter in good cond ...

Safety precautions Trouble shooting Packing list Specification Installation and adjustment Usage of the drain hose Preparation before washing Put in the laundries Usage of the detergent Close the top lid Installation the water inlet hose Disposal after washing * Finish washing Use the operation buttons Answer to question * ...

Safety precautions Trouble shooting Packing list Specification Installation and adjustment Usage of the drain hose Preparation before washing Put in the laundries Usage of the detergent Close the top lid Installation the water inlet hose Disposal after washing * Finish washing Use the operation buttons Answer to question * ...

Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put down the drain hose. Pay attention to followings before washing the laundries Check if the laundries has special requirement on washing Clear the pocket. Take out the coins, sand, hairpins etc. Tie the long strips; fasten the buttons; close zippers. When the pulsator is running , t ...

The digitron displays E0. The safety switch acts, and the spin- ning cannot work. Amend twice automatically ,The digitron displays E3. The water filling does not work, or is slow. The digital displays E4. The drainage cannot work, or is too slow. The digitron displays E1. It stops running in midway. The digitron displays E2. The top lid is not closed. The top lid is opened during reserve procedure. Close the top lid. Close the top lid. Is the drain hose put down? Is the drain hose blocked? Put down the drain hose. ...

The capacity of washing and spinning of he machine refer to the largest weight ofthe standard laundries under dry conditionthat can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing. How to use the washing powder 3 Usage of the detergent Inlet for concentrated washing po ...