Haier WMS656 Operation & User’s Manual

User's manual Names of the parts.............the 2nd cover Safety precautions ...............................1 Installation and adjustment ..................3 Introduction of the major functions .......5 Preparation before washing ................6 The musts in washing .........................7 Usage of the detergent .......................8 Washing sequence ..............................9 Disposal after washing .......................13 Contents Before using Using process Trouble-shooting* Answers to question.....................15 Specification..............the back cover Packing list ......................................17 Please read this manual carefully before using. Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety. The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual.

Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user. Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. Accessories Water-filling jointer (one piece) Water inlet hose (one piece) (one piece) Gland (one piece) Lint filter Spin water-filling entrance Wash selector Wash timer Control panel Overflow filter Wash water-filling entrance Drain hose hook Water level adjusting lever Lint filter(Installed by user) Pulsator Wash tub Drain hose Wash tub cover Outer cover of the spin tub Inner cover of the spin tub Spin timer Spin tub frame Spin tub Cabinet Power cord Base frame

our special shop or the after-sale service department. Keep the pin of the power plug clean. Before Using Before Using Safety precautions In case the washing machine is installed on ground with carpet , do not block the ventilation hole with carpet. Do not use water hotter than 50 C . Do not share one receptacle with other electric appliances. Do not use it in case that the power plug is damaged or the inserting into the receptacle is loose. Do not wash water-proof laundries such as the raincoat, bicycle shelter etc. To avoid abnormal vibration during spinning. Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel. Please insert the power cord into special receptacle with rated voltage.Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there'spower failure, or the machine is being moved, cleaned or when it is idle. Ventilation hole at the bottom of the washing machine Earth

machine. It is dangerous even if the rotation is slow. Take special care of the children. Handicapped or children without care shall not use the machine. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Keep the machine away from direct sunlight and heat source like the heater. Do not wash laundries with volatile materials (such as thinner, petrol etc.). Petrol Thinner Safety precautions Please check if the water faucet is open, and if the connection of the water inlet pipe is proper. It is suggested to use foamless washing powder. To protect your laundries and washing machine, please take out all of the coins, buttons, sand, hairpin and other foreign materials before washing.

Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth enough and cause incomplete drainage. 2.Do not tramp or press the drain hose. 4.If extra drain hose is needed , please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m. 5.If the extra hose is too long, cut it either at point A or B. 3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly. <10cm B A > 30mm <1.5m Lint filter Overflow filter Install the lint filter After opening the package,please take out the lint filter from the document bag,install it to the overflow filter of the cabinet. See to the figure Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.

Side sectional view Extend the drain hose from the rear side Figure 1 indicates the ex factory installation position of the drain hose. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2). Embed the drain hose into the groove along the side of thewash tub in the order of (1)~(2), heading for the side of the wash tub. (See to Figure 3). Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp. Figure 4 Extend the drain hose from the side of wash tub Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 4). Figure 2 Figure 3 Figure 1 Front Back Soft item Soft item Select the water level Page8 Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Maximum Max. Minimum Min Medium Med Water level indicator about 43L about 36L about 30L

The machine has good comprehensive performance, and nice appearance. It adopts streamline appearance and full plastic shell, which will never get rust. For the design on safety and reliability, it adopts the wash shelf, spin shelf and water inlet groove design, and reduces the unfavorable influence on the electrical component by the vapor. Therefore it guarantees more safe and reliable washing. It adopts complete enclosed base frame and low-noise motor, and thus reduces the working noise significantly. We can guarantee that the purchase of this machine will bring you a clean world without disturbing your quiet life. Foam-removing spinning Remove most of the foam extra detergent liquid. Remove the detergent liquid remained The effect is best when the laundries quantity is below 80% of the rated value. Spin Fill water for about 1 minutes Spin for about 1~2 minutes Filling water from wash water-filling entrance When foam-removing spinning during high-efficiency rinsing, please fill water from the spin water-filling entrance. Spin water-filling entrance Foam-removing spinning during high-efficiency rinsing Use the foam-removing spinning to remove the extra detergent liquid. It can both shorten the washing time and save the water consumption. Water inlet hose Water inlet hose Water-filling entrance Push Control handle Wash water inlet Use the new water inlet hose provided with the machine to connect to the water faucet.Old hose sets should not be reused. Insert the water inlet hose into the water-filling entrance, then push the water-filling jointer into the wash water-filling entrance on the major frame. (To dismantle the water inlet pipe, just push the control handle as indicated in the figure and pull it out)

1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Using process Using process Preparation before washing Pay attention to followings before washing the laundries Check if the laundries has special requirement on washing C l e a r t h e pocket. Take out the coins, sand, hairpins etc. Tie the long strips; fasten the buttons; close zippers. When the pulsator is running , the buttons of the laundries may cause noise. For t h e s a k e o f discretion, please put the laundries with buttons into other laundries. The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub. a. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand. d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil. e. For those laundries that may get lint ball and those with long fur, turn it over before putting in. f. Do not put those laundries polluted by chemicals into the washing machine directly.

Working suit up,down Jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest wash capacity of this mach- ine is 7.0kg. The largest spin capacity of this machine is 5.0 kg. The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing. Do not select " Maximum " water level for laundries less than 3.2kg, so as to avoid splashing of water. Blending coat about 800g Shirt Jacket Single bed sheet Socking Underpants Undershirt Pajamas Blanket cotton,about 900g cotton,about 300g cotton,about 800g cotton,about 600g blending,about 50g cotton,about 70g cotton,about 180g Using process Using process The musts in washing cotton,about 1120g

Selection of the current , water level and washing time list 2 How to use the washing powder How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundries directly. Direct dissolved in the machine: 1.Fill small quantity of water. 2.Add the powder . Run for 30 seconds to dissolve it completely. 3.Put it in the laundries. Select suitable water level. The instant dissolving of the washing powder: 1.Prepare warm water of 30 C and a container. 2.Add the powder while stirring to fully dissolve it. The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity. It is suggested not to use high sudsing detergent. Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. Laundries quantity Laundries quantity Water level Water level Standard dosage Concentrated washing powder Laundries Common washing powder Washing time (minutes) Water quantity Water quantity About About About3~6 About8~10 About10~13 About7~13 About2~4 About3~6 About8~10 About About About About 4.5kg~7.0kg 3.2kg~7.0kg 2.5kg~4.5kg Below2.5kg Below3.2kg Maximum (about43L) Maximum (about43L) Minimum (about30L) Minimum (about30L) ~ Medium (about36L) Medium (about36L) ~ Medium (about43L) 46g 38g 30g 55g 46g 36g Usage of the detergent Using process Using process Knitwear Cotton,blending,linen Very dirty and thick Bed sheet Silk(thin laundries) Chemical fiber Cotton,blending,linen

first set to 5 minute then turn it back. it can increase the service life of the timer). (Strong current, standard current) (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). Spin water-filling entrance Figure 1 Figure 2 Figure 4 Wash DRAIN STRONG WASH SELECTOR WASH SELECTOR 1. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 1) Run washing program for some time to stir and dissolve the powder completely. 2.Put in the laundries. If the water quantity is insufficient, please add water. 3.Select the current. Select the strength of the current according to the laundries. (Figure 2) 4.Select the washing time Select the washing time according to the laundries. (Figure 2) 5.After washing, set the "WASH SELECTOR" at "DRAIN". (Figure 4). STANDARD STANDARD STRONG DRAIN OFF 9 OFF 33 Spin water-filling entrance Figure 3 WASH TIMER OFF

Spin Run the foam-removing spinning. Push Push Proper Proper Outer cover of The spin tub Inner cover of The spin tub The laundries are slanting Gland No gland (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. (2) Close the inner and outer cover of the spin tub. (3) Spin for 1-2 minutes. (1) Open the outer cover of the spin tub. (2) Insert the water inlet hose into the spin water-filling entrance on the control panel. Fill water for about 1 minute. (3) Close the outer cover of the spin tub. Spin for 1-2 minutes. Water inlet hose Spin water-filling entrance

Rinse with water-filing 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is below 2.5kg, please use STANDARD current. If you use "STRONG" current, it may splash. Rinsing (Repeat the midway spinning and rinsing with stored water for 2-3 times) 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing.

Laundries Spin time (minutes) About 4~5 Bed sheet or blanket About 2~4 Underwear (knitwear) Swear (chemical fiber) About 1~2 Within 1 minute Blending thin laundries 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to resume the spinning. Spinning To do spinning and draining or rinsing with water-filling together, please first do spinning for around 1 minute, then do draining or rinsing with water-filling. Otherwise the spinning will stop owing to too much water stored in the spin tub.

After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. 1 Take off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow to take it off. Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months. Elastic fixing claw Figure 2 Figure 3 Figure 1 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) 2. Clean the lint Put it in water and clean while it is still wet.(See to Figure 2) 3. Install the lint filter After cleaning, insert the bottom of the lint filter ( marked with "DOWN SIDE") into the overflow filter , then push the upper part of the filter in ( marked with " UP SIDE "). (See to Figure 3) The lint filter must be used during washing. It must be cleaned in time after each using. Cleaning the lint filter

twisted dry. Wipe with neutral detergent if too dirty Do not wash it directly by water Using process Using process Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at the bottom of the filter into original position. (3).Hang up the hook at the left upper side. (4).Push the upper part in as indicated in Figure 2. Corrugation Pipe Hook Figure 1 Figure 2 Water level adjusting lever After washing, dismount the water inlet hose. Do not store water in the tub for long period. Discharge the water immediately after each using. Pull off the power plug and hang up the power cord. Hang up the drain hose. Wipe off the water drops on the surface and inside the tub with clean soft cloth. Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them. Disposal of the complete unit Thinner Alcohol Petrol

When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. When the water is frozen Pour hot water below 50 into the wash tub to soak it completely. Then turn the pulsator with hands gently. Please confirm the drainage can work normally before next using. If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique upwards to dismantle it. 2.Install After install the back edge of the spin tub frame to proper position, push the four points marked with " " by force to reset it. Please check carefully. The laundries may fall to the lower part of the outer side of the spin tub (as indicated in the figure). If the laundries fall to the outer side of the spin tub, during spinning the draining will get blocked and the rotation speed of the spin tub is reduced. Spin tub Laundries Spin tub frame If the laundries fall to the outer side of the spin tub Below 50

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason The machine does not act. Is there power failure? Is the power plug loose? Is the pulsator twisted by foreign materials? The draining does not work Is the drain hose frozen? Is the drain hose blocked by foreign material? Are there laundries falling to the outer side of the spin tub? Is the drain hose put down? There's abnormal sound during washing Are there hair pin, coins or metal items brought inside the tub? Is the machine slanting? Is the gland pressed evenly? Are there laundries falling to the outer side of the spin tub? Are the laundries in spin tub too much? It is the water remained in the factory inspection of performance. There may be some water flowing out of the drain hose in the first use of the machine. There's abnormal sound and violent vibration during spinning

Water-filling jointer Gland Twin-tub washing machine Packing list One piece Lint filter

kg Rated input power W Dimension(mm) Wash pattern Weight kg Injection pressure Rated spinning capacity kg Twin-tub washing machine WMS656 Maximum/43L Medium/36L Minimum/30L 7.0 5.0 Wash 320 Spin 150 L780 W440 H900 New current 23.5 0.02MPa~0.2MPa Specification Rated voltage 220-240V~, Rated frequency 50Hz